Contents

BenQ TL240C User Manual PDF

1 of 29
1 of 29

Summary of Content for BenQ TL240C User Manual PDF

TL240C/TL321C Transparent Display User Manual

Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents of this document. BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes.

Copyright Copyright 2016 BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.

10/31/16

Table of Contents 3

Table of Contents

Disclaimer.............................................................................. 2 Copyright............................................................................... 2 Important Safety Instructions ........................................... 5

Safety Precautions and Maintenance ........................................... 5 Introduction .......................................................................... 6

Functions and Features .................................................................. 6 Package Content.............................................................................. 6

Product Overview ............................................................... 7 Connections...................................................................................... 7 Control Panel ................................................................................... 9

Installation ........................................................................... 10 Install Remote Control Batteries.............................................. 10

Using the Remote Control.............................................. 11 The OSD Functions .......................................................... 13

Input Source................................................................................... 13 Picture ............................................................................................. 13 Audio ............................................................................................... 15 Time Scheduling ............................................................................ 16 Setup................................................................................................ 17 USB .................................................................................................. 17

More Information .............................................................. 20 Supported Video and Photo....................................................... 20 Supported Timing Mode ............................................................. 20

Product Specification ........................................................ 21 Dimensions.......................................................................... 22

TL240C ........................................................................................... 22 TL321C ........................................................................................... 23

Other Notices.................................................................... 24 Appendix 1 .......................................................................... 25

Timer Scheduling (Default Setting: Off) .................................. 25 Appendix 2 .......................................................................... 27

USB .................................................................................................. 27

Table of Contents4

Function Operation...................................................................... 28

Important Safety Instructions 5

Important Safety Instructions Safety Precautions and Maintenance

Please read this user manual before operating this transparent cabinet. Keep this manual in a safe place for future reference.

Always place the transparent cabinet on a flat surface during operation. Do not place inflammables near the transparent cabinet Do not put any object on the transparent cabinet that might crash it. Do not place liquids near or on the cabinet. Liquids spilled into the transparent cabinet will void your warranty.

Do not wipe out the surface of transparent cabinet with any corrosive. Do not scratch the surface of transparent cabinet with any sharp objection. Avoid putting volatile matter nearby the cabinet. Do not tear down the cabinet without any authorized engineer. Always plug in the DC connector first, then plug in the AC connector.

Use of control, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.

Introduction6

Introduction This manual will explain the operation of TL240C/TL321C, including functions, features, and other important information. Before installing or operating your liquid crystal display, please take time to read the manual, particularly the sections on safety.

Functions and Features 1366 x 768 image resolution 260 (TL240) / 217 (TL321C) nits brightness 3000:1 contrast ratio HDMI digital, high-definition multimedia interface VGA, Video Graphics Array DVI, Digital Visual Interface USB flash disk to auto-play videos

Package Content

LCD display x 1 Remote control x 1

Power cord x 1 (by region) D-Sub (15-pin) cable x 1

HDMI cable x 1 Quick start guide x 1

Adapter

ENTER

CATV MTS

C.C EPG

SLEEP RECORDLIST

+

-

INFO

USB

1 2

3 4

5 6

7 8

9 _

0 FAV

MENU

EXIT

SOUND VOL

+

- CHPICTURE

Product Overview 7

Product Overview Connections

Insert USB Stick You can select a USB stick and let the display signage box display the media files in the USB stick.

TL240C

TL321C

Product Overview8

Connect Signal Cables Three signal input ports are provided, and the connections between the signal source and

the display are:

After you turn on the connected computer or the media player, it would be better to set the output resolution to 1366 x 768 @ 60Hz.

Turn Power On Press the power button on the right side of the LCD display or on the remote control to turn on the display.

Signal Source Description Connection Cable

VGA

HDMI

DVI

Product Overview 9

Control Panel

Control Panel

(Down), (Up)

(Left), (Right)

MENU

ENTER/VIDEO SOURCE

Power On/Off

TL240C TL321C

MENU INPUT

(Bottom)

(Back side)

Installation10

Installation Install Remote Control Batteries

Caution Dispose of the battery in accordance with local laws and regulations. Keep the battery away from children and pets. When the remote control is not used for an extended period, remove the battery.

Remove the battery cover. Insert a battery. Re-attach the battery support.

AAA Batteries need to be purchased by customers.

ENTER

CATV MTS C.C EPG

SLEEP RECORD

LIST

+

-

INFO USB

1 2 3

4 5 6

7 8 9

_ 0 FAV

MENU

EXIT

SOUND

VOL

+

- CH

PICTURE

Using the Remote Control 11

Using the Remote Control

Keypad Function Remote Control

Switch power on or power off

MUTE on or off

Not support

Not support

Not support

Not support

Fast backward

Fast forward

Previous

Next

Not support

Not support

Play and Pause

Stop

File list

Information

Zoom mode setting

Enter Media Player

Enter setup menu

Input source setting (only support for HDMI/VGA/DVI)

Using the Remote Control12

Keypad Function Remote Control

Exit

Not support

Up

Left

Right

Down

Enter

Volume up or down

Not support

Sound mode setting (only support for HDMI/VGA/DVI)

Image mode setting (only support for HDMI/VGA/DVI)

Not support

Not support

Not support

The OSD Functions 13

The OSD Functions Input Source

Picture

Item Selection Description

Input Source VGA, HDMI, DVI To select the input signal source.

Item Selection Description

Picture Mode (only support for VGA/HDMI/DVI)

Sharpness, Saturation & Hue and Color can be selected

only for the video signal.

Standard, Dynamic, Soft

To select the type of preset picture mode that suit your personal

preference or viewing requirement.

Personal, Contrast, Brightness, Sharpness, Hue, Saturation

To manually configure the following picture setting to suit your personal preference or viewing requirement.

To adjust the contrast level of picture.

To adjust the brightness level of picture.

To adjust the edge definition of picture.

To adjust the color hue of picture. To adjust the color saturation of picture.

Color Mode Cool, Normal, Warm For color temperature adjustment, you can select Cool/Normal/Warm mode.

The OSD Functions14

Advanced (only for input source set to

VGA)

H-Pos., V-Pos., Clock, Phase, Auto

To manually adjust the position of the display area left or right.

To manually adjust the position of the display area up or down.

To manually adjust the width of the display image.

To manually sharpen the focus of text or graphic with pixel boundaries.

To automatically adjust the incoming VGA signal to the optimal status for displaying.

Zoom Mode Full, 4:3, 16:9

Set the picture to full screen. Set the picture to 4:3 format and put black borders on the left and right of the picture.

Set the picture to 16: 9 format and put black borders on the left and right of picture.

Backlight 1~100 To adjust the brightness of LED backlight.

The OSD Functions 15

Audio

Item Selection Description

Equalizer Standard

Standard, Music, Movie, Sports

To select the type of preset picture mode that suit your personal

preference or viewing requirement.

Personal

To manually configure the following picture setting to suit your personal preference or viewing requirement.

To adjust the contrast level of picture.

To adjust the brightness level of picture.

To adjust the edge definition of picture.

To adjust the color hue of picture. To adjust the color saturation of picture.

120 Hz, 500 Hz, 1.5 KHz, 5 KHz, 10 KHz, Balance

Adjust the loudness of 120 Hz bandwidth.

Adjust the loudness of 500 Hz bandwidth.

Adjust the loudness of 1.5 KHz bandwidth.

Adjust the loudness of 5 KHz bandwidth.

Adjust the loudness of 10 KHz bandwidth.

Adjust the balance between the left and right speaker.

Surround Sound On, Off To enable virtual surround effect through two speaker systems.

The OSD Functions16

Time Scheduling

Item Selection Description

Time Scheduling On, Off To enable Time Scheduling Function.

Clock Year, Month, Day, Hour, Minute

To set the current time manually.

Work Time Hour, Minute To set ON Time and Off Time.

After Time scheduling function is activated, the transparent display will always turn on/off based on your setting until you close the function.

For further details about this option, please refer to Appendix 1.

The OSD Functions 17

Setup

USB

Item Selection Description

Menu Language English, Chinese Traditional, Chinese Simplified

To select menu displaying language.

Restore Default Yes/No To restore all setting of menu to default factory setting.

Software Update (USB) Yes/No

To proceed software update via USB driver (only available for authorized technician).

Item Selection Description

USB Enter to Media Player mode.

The OSD Functions18

USB Functions Media Type Select Page

Device Select Page

Item Selection Description

PHOTO Select to show picture type. MUSIC Select to show music type. MOVIE Select to show movie type.

Item Selection Description

Return Back to the top level.

ADATA For USB device names, enter file select page when selected.

The OSD Functions 19

File Select Page

Item Selection Description

Return Back to the top level.

File name To show the files of selected types, select a file to play.

The transparent display is not able to read the files from the folder in the USB flash drive, so save the files outside the folder.

The order to play the files is based on the file name. You can rename the files (ex: 1, 2, 3) to have your preferred play list.

For further information, please refer to Appendix 2.

More Information20

More Information Supported Video and Photo

Supported Timing Mode The supported timing modes for VGA signal / HDMI signal are:

Media Type Format

Photo JPG, BMP, PNG Audio MP3, AAC, WAV, WMA Video MPEG, MP4

Timing Mode Resolution

720x400@70Hz

VGA 640x480@60Hz 640x480@72Hz 640x480@75Hz

SVGA 800x600@60Hz 800x600@72Hz 800x600@75Hz

XGA 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz 1360x768@60Hz

Video 720p 1080p

Product Specification 21

Product Specification Model TL240C/TL321C

LCD

Type TL240C: 23.6" color TFT active matrix, wide

LCD TL321C: 32" color TFT active matrix, wide LCD

Display Area TL240C: 521.47(H) x 293.18(V) TL321C: 697.68(H) x 392.26(V)

Optimum Resolution 1366 x 768

Light Source LED

Brightness TL240C: 260 nits TL321C: 217 nits

Input

Video Input VGA/DVI/HDMI/USB 2.0 In

Control Input Remote Controller

Audio Input Line In(3.5 mm)

Speaker Amplifier 2W x 2

Connector

Analog VGA

Digital DVI/HDMI

Power 4 pin plug

Power

Voltage Input: AC 100-240V(universal), 50-60Hz

Output: DV 24V, 5A

Consumption TL240C: 67 W (Typ.) TL321C: 90 W (Typ.)

Operation Conditions

Temperature 0 ~ 40C

Humidity TL240C: 20% ~ 90% TL321C: 10% ~ 90%

Altitude 0~3000 m

Dimensions (mm) TL240C: 554.0 (W) x362.0 (W) x264.6 (D) TL321C: 733.8 (W) x464.0 (W) x352.5 (D)

Internal space size (mm) TL240C: 535.0 (W) x243.0 (W) x305.2 (D) TL321C: 680.0 (W) x420.0 (W) x300.0 (D)

Weight Net TL240C: 9.3 Kg

TL321C: 14.9 Kg

Package

Size (mm) TL240C: 721.3 (W) x536.0 (W) x360.0 (D) TL321C: 947.1 (W) x693.8 (W) x481.9 (D)

Weight TL240C: 13.5 Kg TL321C: 23.5 Kg

Dimensions22

Dimensions TL240C

Dimensions 23

TL321C

Other Notices24

Other Notices Every time when it comes to AC reconnection, you need to turn on the transparent display manually by the keypad or remote control.

The transparent display is able to remember the last input source before it is turned off by the remote control. Next time when you turn on the display, it will present the last file via the last input directly. If the previous input source has been removed, you need to switch to the new input source manually.

If the transparent display does not detect any input sources in 600 seconds, it will enter power save mode. You need to press Power on to wake it up again.

Appendix 1 25

Appendix 1 Timer Scheduling (Default Setting: Off) 1. Go to the Setup page and select Restore Default, to set default value.

2. Go to the Time page, move to Timer Scheduling, and you can press Enter button

to set Timer Scheduling mode On/Off.

If Timer scheduling mode is off, the transparent display has remember last input source function.

If Timer scheduling mode is on, the function remember last input source will be off.

Appendix 126

3. Go to Clock, press Enter button to set timer, and you can change Year/Month/ Day/Hour/Minute to set the timer.

4. Go to Work Time, press Enter button to set Timer Scheduling Timer

setting. On is monitor open time, Off is monitor close time.

If an interruption of power supply occurs, you need to reset clock to match the current time.

Appendix 2 27

Appendix 2 USB

1. Press key or select USB on the OSD menu page for auto playing (all files).

2. Press or to exit playing, and go to the file select page. On this page, you can select which file you want to play. To be noted, default setting repeats all.

3. Press to go to the device select page.

4. Press to go back to the media type select page.

USB

EXIT

EXIT

EXIT

Appendix 228

5. Press to choose Photo (only display photo) or Music, Movie to go to the

device select page, and press to choose the device and go to file select page.

Function Operation

1. To play media, press , and the function bar will be shown.

ENTER

ENTER

MENU

Appendix 2 29

2. You can use the function bar to operate functions. You can select the function and

press . If you want to close the function bar, press .

3. Select Playlist or to go to the Playlist page. Select Cancel on the right

bottom to close the playlist page and go to the function bar page.

4. Press Info. to go to file info page. Select Close to close file info page and go back to

the function bar page.

5. R_ALL function (on the next page, please press to the next page) has three sub-functions to choose from. R ALL, R ONE, R NONE. R ALL is repeat all, R ONE is repeat one file, and R NONE is all f

Manualsnet FAQs

If you want to find out how the TL240C BenQ works, you can view and download the BenQ TL240C User Manual on the Manualsnet website.

Yes, we have the User Manual for BenQ TL240C as well as other BenQ manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a BenQ TL240C. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the BenQ TL240C User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This BenQ TL240C User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download BenQ TL240C User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print BenQ TL240C User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the BenQ TL240C User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.