Behringer B1220DSP Quick Start Guide PDF

1 of 11
1 of 11

Summary of Content for Behringer B1220DSP Quick Start Guide PDF

(Check out behringer.com for Full Manual)Quick Start Guide

EUROLIVE B1220DSP Digital Processor-Controlled 600-Watt 12" PA Speaker System with Integrated Mixer

2 EUROLIVE B1220DSP Quick Start Guide 3

Important Safety Instructions

LEGAL DISCLAIMER

LIMITED WARRANTY

Instrucciones de seguridad

NEGACIN LEGAL

GARANTA LIMITADA

Terminals marked with this symbol carry electrical current of suffi cient magnitude to constitute risk of electric shock.

Use only high-quality professional speaker cables with " TS or twist-locking plugs pre-installed. All other installation or modifi cation should be performed only by qualifi ed personnel.

This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the

enclosure - voltage that may be suffi cient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the

accompanying literature. Please read the manual.

Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section).

No user serviceable parts inside. Refer servicing to qualifi ed personnel.

Caution To reduce the risk of fi re or electric shock, do not expose this appliance to rain and

moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects fi lled with liquids, such as vases, shall be placed on the apparatus.

Caution These service instructions are for use by qualifi ed service personnel only.

To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualifi ed service personnel.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fi t into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Use only attachments/accessories specifi ed by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.

16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA, AND TURBOSOUND ARE PART OF THE MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY

TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD.

ALL RIGHTS RESERVED. 2013 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands

For the applicable warranty terms and conditions and additional information regarding MUSIC Groups Limited Warranty, please see complete details online at www.music-group.com/warranty.

Las terminales marcadas con este smbolo transportan corriente elctrica de magnitud sufi ciente como para constituir

un riesgo de descarga elctrica. Utilice solo cables de altavoz profesionales y de alta calidad con conectores TS de 6,3 mm o de bayoneta prefi jados. Cualquier otra instalacin o modifi cacin debe ser realizada nicamente por un tcnico cualifi cado.

Este smbolo, siempre que aparece, le advierte de la presencia de voltaje peligroso sin aislar dentro de la caja;

este voltaje puede ser sufi ciente para constituir un riesgo de descarga.

Este smbolo, siempre que aparece, le advierte sobre instrucciones operativas y de mantenimiento que aparecen en la

documentacin adjunta. Por favor, lea el manual.

Atencin Para reducir el riesgo de descarga elctrica, no quite la tapa (o la parte

posterior). No hay piezas en el interior del equipo que puedan ser reparadas por el usuario. Si es necesario, pngase en contacto con personal cualifi cado.

Atencin Para reducir el riesgo de incendio o descarga elctrica, no exponga este

aparato a la lluvia, humedad o alguna otra fuente que pueda salpicar o derramar algn lquido sobre el aparato. No coloque ningn tipo de recipiente para lquidos sobre el aparato.

Atencin Las instrucciones de servicio deben llevarlas a cabo exclusivamente personal

cualifi cado. Para evitar el riesgo de una descarga elctrica, no realice reparaciones que no se encuentren descritas en el manual de operaciones. Las reparaciones deben ser realizadas exclusivamente por personal cualifi cado.

1. Lea las instrucciones.

2. Conserve estas instrucciones.

3. Preste atencin a todas las advertencias.

4. Siga todas las instrucciones.

5. No use este aparato cerca del agua.

6. Limpie este aparato con un pao seco.

7. No bloquee las aberturas de ventilacin. Instale el equipo de acuerdo con las instrucciones del fabricante.

8. No instale este equipo cerca de fuentes de calor tales como radiadores, acumuladores de calor, estufas u otros aparatos (incluyendo amplifi cadores) que puedan producir calor.

9. No elimine o deshabilite nunca la conexin a tierra del aparato o del cable de alimentacin de corriente. Un enchufe polarizado tiene dos polos, uno de los cuales tiene un contacto ms ancho que el otro. Una clavija con puesta a tierra dispone de tres contactos: dos polos y la puesta a tierra. El contacto ancho y el tercer contacto, respectivamente, son los que garantizan una mayor seguridad. Si el enchufe suministrado con el equipo no concuerda con la toma de corriente, consulte con un electricista para cambiar la toma de corriente obsoleta.

10. Coloque el cable de suministro de energa de manera que no pueda ser pisado y que est protegido de objetos afi lados. Asegrese de que el cable de suministro de energa est protegido, especialmente en la zona de la clavija y en el punto donde sale del aparato.

11. Use nicamente los dispositivos o accesorios especifi cados por el fabricante.

12. Use nicamente la carretilla, plataforma, trpode, soporte o mesa especifi cados por el fabricante o suministrados junto con el equipo. Al transportar el equipo, tenga cuidado para evitar

daos y cadas al tropezar con algn obstculo.

13. Desenchufe el equipo durante tormentas o si no va a utilizarlo durante un periodo largo.

14. Confe las reparaciones nicamente a servicios tcnicos cualifi cados. La unidad requiere mantenimiento siempre que haya sufrido algn dao, si el cable de suministro de energa o el enchufe presentaran daos, se hubiera derramado un lquido o hubieran cado objetos dentro del equipo, si el aparato hubiera estado expuesto a la humedad o la lluvia, si ha dejado de funcionar de manera normal o si ha sufrido algn golpe o cada.

15. Al conectar la unidad a la toma de corriente elctrica asegrese de que la conexin disponga de una unin a tierra.

16. Si el enchufe o conector de red sirve como nico medio de desconexin, ste debe ser accesible fcilmente.

LAS ESPECIFICACIONES TCNICAS Y LA APARIENCIA EXTERIOR ESTN SUJETAS A CAMBIOS SIN PREVIO AVISO Y NO PODEMOS GARANTIZAR LA TOTAL EXACTITUD DE TODO LO QUE APARECE AQU. BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA, Y TURBOSOUND SON PARTE DEL GRUPO MUSIC GROUP (MUSIC-GROUP.COM). TODAS LAS MARCAS REGISTRADAS SON PROPIEDAD DE SUS RESPECTIVOS DUEOS. MUSIC GROUP NO ACEPTA NINGN TIPO DE RESPONSABILIDAD POR POSIBLES DAOS Y PERJUICIOS SUFRIDOS POR CUALQUIER PERSONA QUE SE HAYA BASADO COMPLETAMENTE O EN PARTE EN LAS DESCRIPCIONES, FOTOGRAFAS O EXPLICACIONES QUE APARECEN EN ESTE DOCUMENTO. LOS COLORES Y ESPECIFICACIONES TCNICAS PUEDEN VARIAR LIGERAMENTE DE UN PRODUCTO A OTRO. LOS PRODUCTOS MUSIC GROUP SON COMERCIALIZADOS NICAMENTE A TRAVS DE DISTRIBUIDORES OFICIALES. LOS DISTRIBUIDORES Y MAYORISTAS NO SON AGENTES DE MUSIC GROUP, POR LO QUE NO ESTN AUTORIZADOS A CONCEDER NINGN TIPO DE CONTRATO O GARANTA QUE OBLIGUE A MUSIC GROUP DE FORMA EXPRESA O IMPLCITA. ESTE MANUAL EST PROTEGIDO POR LAS LEYES DEL COPYRIGHT. ESTE MANUAL NO PUEDE SER REPRODUCIDO O TRANSMITIDO, NI COMPLETO NI EN PARTE, POR NINGN TIPO DE MEDIO, TANTO SI ES ELECTRNICO COMO MECNICO, INCLUYENDO EL FOTOCOPIADO O REGISTRO DE CUALQUIER TIPO Y PARA CUALQUIER FIN, SIN LA AUTORIZACIN EXPRESA Y POR ESCRITO DE MUSIC GROUP IP LTD.

RESERVADOS TODOS LOS DERECHOS. 2013 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands

Si quiere conocer los detalles y condiciones aplicables de la garanta as como informacin adicional sobre la Garanta limitada de MUSIC group, consulte online toda la informacin en la web www.music-group.com/warranty.

4 EUROLIVE B1220DSP Quick Start Guide 5

Consignes de scurit DNI LGAL

GARANTIE LIMITE

Wichtige Sicherhteitshinweise

HAFTUNGSAUSSCHLUSS

BESCHRNKTE GARANTIE

Les points reprs par ce symbole portent une tension lectrique suffi sante pour constituer un risque dlectrocution.

Utilisez uniquement des cbles denceintes professionnels de haute qualit avec fi ches Jack mono 6,35 mm ou fi ches verrouillages dj installes. Toute autre installation ou modifi cation doit tre eff ectue uniquement par un personnel qualifi .

Ce symbole avertit de la prsence dune tension dangereuse et non isole lintrieur de lappareil - elle peut

provoquer des chocs lectriques.

Attention Ce symbol signale les consignes dutilisation et dentre ! Tien importantes

dans la documentation fournie. Lisez les consignes de scurit du manuel dutilisation de lappareil.

Attention Pour viter tout risque de choc lectrique, ne pas ouvrir le capot de lappareil ni

dmonter le panneau arrire. Lintrieur de lappareil ne possde aucun lment rparable par lutilisateur. Laisser toute rparation un professionnel qualifi .

Attention Pour rduire les risques de feu et de choc lectrique, nexposez pas cet appareil la

pluie, la moisissure, aux gouttes ou aux claboussures. Ne posez pas de rcipient contenant un liquide sur lappareil (un vase par exemple).

Attention Ces consignes de scurit et dentretien sont destines un personnel qualifi .

Pour viter tout risque de choc lectrique, neff ectuez aucune rparation sur lappareil qui ne soit dcrite par le manuel dutilisation. Les ventuelles rparations doivent tre eff ectues uniquement par un technicien spcialis.

1. Lisez ces consignes.

2. Conservez ces consignes.

3. Respectez tous les avertissements.

4. Respectez toutes les consignes dutilisation.

5. Nutilisez jamais lappareil proximit dun liquide.

6. Nettoyez lappareil avec un chiff on sec.

7. Veillez ne pas empcher la bonne ventilation de lappareil via ses oues de ventilation. Respectez les consignes du fabricant concernant linstallation de lappareil.

8. Ne placez pas lappareil proximit dune source de chaleur telle quun chauff age, une cuisinire ou tout appareil dgageant de la chaleur (y compris un ampli de puissance).

9. Ne supprimez jamais la scurit des prises bipolaires ou des prises terre. Les prises bipolaires possdent deux contacts de largeur diff rente. Le plus large est le contact de scurit. Les prises terre possdent deux contacts plus une mise la terre servant de scurit. Si la prise du bloc dalimentation ou du cordon dali-mentation fourni ne correspond pas celles de votre installation lectrique, faites appel un lectricien pour eff ectuer le changement de prise.

10. Installez le cordon dalimentation de telle faon que personne ne puisse marcher dessus et quil soit protg dartes coupantes. Assurez-vous que le cordon dalimentation est suffisamment protg, notamment au niveau de sa prise lectrique et de lendroit o il est reli lappareil; cela est galement valable pour une ventuelle rallonge lectrique.

11. Utilisez exclusivement des accessoires et des appareils supplmentaires recommands par le fabricant.

12. Utilisez exclusivement des chariots, des diables, des prsentoirs, des pieds et des surfaces de travail recommands par le fabricant ou livrs avec le produit.

Dplacez prcautionneusement tout chariot ou diable charg pour viter dventuelles blessures en cas de chute.

13. Dbranchez lappareil de la tension secteur en cas dorage ou si lappareil reste inutilis pendant une longue priode de temps.

14. Les travaux dentretien de lappareil doivent tre eff ectus uniquement par du personnel qualifi. Aucun entretien nest ncessaire sauf si lappareil est endommag de quelque faon que ce soit (dommages sur le cordon dalimentation ou la prise par exemple), si un liquide ou un objet a pntr lintrieur du chssis, si lappareil a t expos la pluie ou lhumidit, sil ne fonctionne pas correctement ou la suite dune chute.

15. Lappareil doit tre connect une prise secteur dote dune protection par mise la terre.

16. La prise lectrique ou la prise IEC de tout appareil dnu de bouton marche/arrt doit rester accessible en permanence.

CARACTRISTIQUES TECHNIQUES ET APPARENCE SUJETTES MODIFICATIONS SANS PRAVIS. PRCISION NON GARANTIE. BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA, ET TURBOSOUND FONT PARTIE DU MUSIC GROUP (MUSIC-GROUP.COM). TOUTES LES MARQUES DPOSES SONT LA PROPRIT DE LEURS PROPRITAIRES RESPECTIFS. LA SOCIT MUSIC GROUP NACCEPTE AUCUNE RESPONSABILIT DANS LES VENTUELS DOMMAGES OU PERTES SUBIS PAR UN TIERS EN SE BASANT EN ENTIER OU EN PARTIE SUR LES DESCRIPTIONS, PHOTOGRAPHIES OU DCLARATIONS CONTENUES DANS CE DOCUMENT. LES COULEURS ET CARACTRISTIQUES PEUVENT VARIER LGREMENT DE CELLES DU PRODUIT. LES PRODUITS MUSIC GROUP NE SONT VENDUS QUE PAR LE BIAIS DE REVENDEURS AGRS. LES DISTRIBUTEURS ET LES REVENDEURS NE SONT PAS AGENTS DE MUSIC GROUP ET NONT ABSOLUMENT AUCUNE AUTORIT POUR ENGAGER OU REPRSENTER LA SOCIT MUSIC GROUP DE FAON IMPLICITE, EXPLICITE OU INDIRECTE. CE MODE DEMPLOI EST PROTG PAR DROITS DAUTEURS. IL EST INTERDIT DE TRANSMETTRE OU DE COPIER CE MODE DEMPLOI SOUS QUELLE FORME QUE CE SOIT, PAR QUEL MOYEN QUE CE SOIT, LECTRONIQUE OU MCANIQUE, CE QUI COMPREND LES MOYENS DE PHOTOCOPIE ET DENREGISTREMENT DE QUELLE FAON QUE CE SOIT, QUEL QUE SOIT LE BUT, SANS LA PERMISSION CRITE EXPRESSE DE MUSIC GROUP IP LTD.

TOUS DROITS RSERVS. 2013 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, Iles Vierges Britanniques

Pour connatre les termes et conditions de garantie applicables, ainsi que les informations supplmentaires et dtailles sur la Garantie Limite de MUSIC Group, consultez le site Internet www.music-group.com/warranty.

Vorsicht Die mit dem Symbol markierten Anschlsse fhren so viel Spannung,

dass die Gefahr eines Stromschlags besteht. Verwenden Sie nur hochwertige, professionelle Lautsprecherkabel mit vorinstallierten 6,35 mm MONO-Klinkensteckern oder Lautsprecherstecker mit Drehverriegelung. Alle anderen Installationen oder Modifi kationen sollten nur von qualifi ziertem Fachpersonal ausgefhrt werden.

Achtung Um eine Gefhrdung durch Stromschlag auszuschlieen, darf die Gerteabdeckung

bzw. Gerterckwand nicht abgenommen werden. Im Innern des Gerts befi nden sich keine vom Benutzer reparierbaren Teile. Reparaturarbeiten drfen nur von qualifi ziertem Personal ausgefhrt werden.

Achtung Um eine Gefhrdung durch Feuer bzw. Stromschlag auszuschlieen, darf dieses

Gert weder Regen oder Feuchtigkeit ausgesetzt werden noch sollten Spritzwasser oder tropfende Flssigkeiten in das Gert gelangen knnen. Stellen Sie keine mit Flssigkeit gefllten Gegenstnde, wie z. B. Vasen, auf das Gert.

Achtung Die Service-Hinweise sind nur durch qualifi ziertes Personal zu befolgen.

Um eine Gefhrdung durch Stromschlag zu vermeiden, fhren Sie bitte keinerlei Reparaturen an dem Gert durch, die nicht in der Bedienungsanleitung beschrieben sind. Reparaturen sind nur von qualifi ziertem Fachpersonal durchzufhren.

1. Lesen Sie diese Hinweise.

2. Bewahren Sie diese Hinweise auf.

3. Beachten Sie alle Warnhinweise.

4. Befolgen Sie alle Bedienungshinweise.

5. Betreiben Sie das Gert nicht in der Nhe von Wasser.

6. Reinigen Sie das Gert mit einem trockenen Tuch.

7. Blockieren Sie nicht die Belftungsschlitze. Beachten Sie beim Einbau des Gertes die Herstellerhinweise.

8. Stellen Sie das Gert nicht in der Nhe von Wrmequellen auf. Solche Wrmequellen sind z. B. Heizkrper, Herde oder andere Wrme erzeugende Gerte (auch Verstrker).

9. Entfernen Sie in keinem Fall die Sicherheitsvorrichtung von Zweipol- oder geerdeten Steckern. Ein Zweipolstecker hat zwei unterschiedlich breite Steckkontakte. Ein geerdeter Stecker hat zwei Steckkontakte und einen dritten Erdungskontakt. Der breitere Steckkontakt oder der zustzliche

Erdungskontakt dient Ihrer Sicherheit. Falls das mitgelieferte Steckerformat nicht zu Ihrer Steckdose passt, wenden Sie sich bitte an einen Elektriker, damit die Steckdose entsprechend ausgetauscht wird.

10. Verlegen Sie das Netzkabel so, dass es vor Tritten und scharfen Kanten geschtzt ist und nicht beschdigt werden kann. Achten Sie bitte insbesondere im Bereich der Stecker, Verlngerungskabel und an der Stelle, an der das Netzkabel das Gert verlsst, auf ausreichenden Schutz.

11. Das Gert muss jederzeit mit intaktem Schutzleiter an das Stromnetz angeschlossen sein.

12. Sollte der Hauptnetzstecker oder eine Gertesteckdose die Funktionseinheit zum Abschalten sein, muss diese immer zugnglich sein.

13. Verwenden Sie nur Zusatzgerte/Zubehrteile, die laut Hersteller geeignet sind.

14. Verwenden Sie nur Wagen, Standvorrichtungen, Stative, Halter oder Tische, die vom Hersteller benannt oder im Lieferumfang des Gerts enthalten sind. Falls Sie einen

Wagen benutzen, seien Sie vorsichtig beim Bewegen der Wagen- Gertkombination, um Verletzungen durch Stolpern zu vermeiden.

15. Ziehen Sie den Netzstecker bei Gewitter oder wenn Sie das Gert lngere Zeit nicht benutzen.

16. Lassen Sie alle Wartungsarbeiten nur von qualifi ziertem Service-Personal ausfhren. Eine Wartung ist notwendig, wenn das Gert in irgendeiner Weise beschdigt wurde (z. B. Beschdigung des Netzkabels oder Steckers), Gegenstnde oder Flssigkeit in das Gerteinnere gelangt sind, das Gert Regen oder Feuchtigkeit ausgesetzt wurde, das Gert nicht ordnungsgem funktioniert oder auf den Boden gefallen ist.

17. Korrekte Entsorgung dieses Produkts: Dieses Symbol weist darauf hin, das Produkt entsprechend der WEEE Direktive (2002/96/EC) und der jeweiligen nationalen Gesetze nicht zusammen mit Ihren

Haushaltsabfllen zu entsorgen. Dieses Produkt sollte bei einer autorisierten Sammelstelle fr Recycling elektrischer und elektronischer Gerte (EEE) abgegeben werden. Wegen bedenklicher Substanzen, die generell mit elektrischen und elektronischen Gerten in Verbindung stehen, knnte eine unsachgeme Behandlung dieser Abfallart eine negative Auswirkung auf Umwelt und Gesundheit haben. Gleichzeitig gewhrleistet Ihr Beitrag zur richtigen Entsorgung dieses Produkts die eff ektive Nutzung natrlicher Ressourcen. Fr weitere Informationen zur Entsorgung Ihrer Gerte bei einer Recycling-Stelle nehmen Sie bitte Kontakt zum zustndigen stdtischen Bro, Entsorgungsamt oder zu Ihrem Haushaltsabfallentsorger auf.

TECHNISCHE DATEN UND ERSCHEINUNGSBILD KNNEN UNANGEKNDIGT GENDERT WERDEN. IRRTMER BLEIBEN VORBEHALTEN. BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA UND TURBOSOUND SIND TEIL DER MUSIC GROUP (MUSIC-GROUP.COM). ALLE WARENZEICHEN SIND DAS EIGENTUM IHRER JEWEILIGEN BESITZER. MUSIC GROUP BERNIMMT KEINE HAFTUNG FR VERLUSTE, DIE PERSONEN ENTSTEHEN, DIE SICH GANZ ODER TEILWEISE AUF HIER ENTHALTENE BESCHREIBUNGEN, FOTOS ODER AUSSAGEN VERLASSEN. ABGEBILDETE FARBEN UND SPEZIFIKATIONEN KNNEN GERINGFGIG VOM PRODUKT ABWEICHEN. MUSIC GROUP PRODUKTE WERDEN NUR BER AUTORISIERTE FACHHNDLER VERKAUFT. DIE VERTRIEBSPARTNER UND HNDLER SIND KEINE VERTRETER VON MUSIC GROUP UND SIND NICHT BERECHTIGT, MUSIC GROUP DURCH AUSDRCKLICHE ODER STILLSCHWEIGENDE HANDLUNGEN ODER REPRSENTANZEN ZU VERPFLICHTEN. DIESE BEDIENUNGSANLEITUNG IST URHEBERRECHTLICH GESCHTZT. KEIN TEIL DIESES HANDBUCHS DARF IN IRGENDEINER FORM ODER MIT IRGENDWELCHEN MITTELN ELEKTRONISCH ODER MECHANISCH, INKLUSIVE FOTOKOPIE ODER AUFNAHME, ZU IRGENDEINEM ZWECK OHNE DIE SCHRIFTLICHE ZUSTIMMUNG DER FIRMA MUSIC GROUP IP LTD. VERVIELFLTIGT ODER BERTRAGEN WERDEN.

ALLE RECHTE VORBEHALTEN. 2013 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands

Die geltenden Garantiebedingungen und zustzliche Informationen bezglich der von MUSIC Group gewhrten beschrnkten Garantie fi nden Sie online unter www. music-group.com/warranty.

6 EUROLIVE B1220DSP Quick Start Guide 7

Instrues de Segurana Importantes

LEGAL RENUNCIANTE

GARANTIA LIMITADA

Aviso! Terminais marcados com o smbolo carregam corrente eltrica de magnitude

sufi ciente para constituir um risco de choque eltrico. Use apenas cabos de alto-falantes de alta qualidade com plugues TS de " ou plugues com trava de toro pr-instalados. Todas as outras instalaes e modifi caes devem ser efetuadas por pessoas qualifi cadas.

Este smbolo, onde quer que o encontre, alerta-o para a leitura das instrues de manuseamento que acompanham o

equipamento. Por favor leia o manual de instrues.

Ateno De forma a diminuir o risco de choque elctrico, no remover a cobertura

(ou a seco de trs). No existem peas substituveis por parte do utilizador no seu interior. Para esse efeito recorrer a um tcnico qualifi cado.

Ateno Para reduzir o risco de incndios ou choques elctricos o aparelho no deve ser

exposto chuva nem humidade. Alm disso, no deve ser sujeito a salpicos, nem devem ser colocados em cima do aparelho objectos contendo lquidos, tais como jarras.

Ateno Estas instrues de operao devem ser utilizadas, em exclusivo, por tcnicos de

assistncia qualifi cados. Para evitar choques elctricos no proceda a reparaes ou intervenes, que no as indicadas nas instrues de operao, salvo se possuir as qualifi -caes necessrias. Para evitar choques elctricos no proceda a reparaes ou intervenes, que no as indicadas nas instrues de operao. S o dever fazer se possuir as qualifi caes necessrias.

1. Leia estas instrues.

2. Guarde estas instrues.

3. Preste ateno a todos os avisos.

4. Siga todas as instrues.

5. No utilize este dispositivo perto de gua.

6. Limpe apenas com um pano seco.

7. No obstrua as entradas de ventilao. Instale de acordo com as instrues do fabricante.

8. No instale perto de quaisquer fontes de calor tais como radiadores, bocas de ar quente, foges de sala ou outros aparelhos (incluindo amplifi cadores) que produzam calor.

9. No anule o objectivo de segurana das fi chas polarizadas ou do tipo de ligao terra. Uma fi cha polarizada dispe de duas palhetas sendo uma mais larga do que a outra. Uma fi cha do tipo ligao terra dispe

de duas palhetas e um terceiro dente de ligao terra. A palheta larga ou o terceiro dente so fornecidos para sua segurana. Se a fi cha fornecida no encaixar na sua tomada, consulte um electricista para a substituio da tomada obsoleta.

10. Proteja o cabo de alimentao de pisadelas ou apertos, especialmente nas fi chas, extenses, e no local de sada da unidade. Certifi que-se de que o cabo elctrico est protegido. Verifi que particularmente nas fi chas, nos receptculos e no ponto em que o cabo sai do aparelho.

11. O aparelho tem de estar sempre conectado rede elctrica com o condutor de proteco intacto.

12. Se utilizar uma fi cha de rede principal ou uma tomada de aparelhos para desligar a unidade de funcionamento, esta deve estar sempre acessvel.

13. Utilize apenas ligaes/acessrios especifi cados pelo fabricante.

14. Utilize apenas com o carrinho, estrutura, trip, suporte, ou mesa especifi cados pelo fabricante ou vendidos com o dispositivo. Quando utilizar um carrinho, tenha cuidado ao

mover o conjunto carrinho/dispositivo para evitar danos provocados pela terpidao.

15. Desligue este dispositivo durante as trovoadas ou quando no for utilizado durante longos perodos de tempo.

16. Qualquer tipo de reparao deve ser sempre efectuado por pessoal qualifi cado. necessria uma reparao sempre que a unidade tiver sido de alguma forma danifi cada, como por exemplo: no caso do cabo de alimentao ou fi cha se encontrarem danifi cados; na eventualidade de lquido ter sido derramado ou objectos terem cado para dentro do dispositivo; no caso da unidade ter estado exposta chuva ou humidade; se esta no funcionar normalmente, ou se tiver cado.

17. Correcta eliminao deste produto: este smbolo indica que o produto no deve ser eliminado juntamente com os resduos domsticos, segundo a Directiva REEE (2002/96/CE) e a legislao nacional. Este produto dever

ser levado para um centro de recolha licenciado para a reciclagem de resduos de equipamentos elctricos e electrnicos (EEE). O tratamento incorrecto deste tipo de resduos pode ter um eventual impacto negativo no ambiente e na sade humana devido a substncias potencialmente perigosas que esto geralmente associadas aos EEE. Ao mesmo tempo, a sua colaborao para a eliminao correcta deste produto ir contribuir para a utilizao efi ciente dos recursos naturais. Para mais informao acerca dos locais onde poder deixar o seu equipamento usado para reciclagem, favor contactar os servios municipais locais, a entidade de gesto de resduos ou os servios de recolha de resduos domsticos.

ESPECIFICAES TCNICAS E APARNCIA ESTO SUJEITAS A MUDANAS SEM AVISO PRVIO E NO H GARANTIA DE PRECISO . BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA, E TURBOSOUND FAZEM PARTE DO MUSIC GROUP (MUSIC-GROUP.COM). TODAS AS MARCAS REGISTADAS SO PROPRIEDADE DOS SEUS RESPECTIVOS PROPRIETRIOS. MUSIC GROUP NO SE RESPONSABILIZA POR QUALQUER PERDA QUE POSSA TER SIDO SOFRIDA POR QUALQUER PESSOA QUE ACREDITA TANTO COMPLETA QUANTO PARCIALMENTE EM QUALQUER DESCRIO, FOTO OU AFIRMAO AQUI CONTIDA. CORES E ESPECIFICAES PODEM VARIAR UM POUCO DO PRODUTO. OS PRODUTOS DA MUSIC GROUP SO VENDIDOS ATRAVS DE DISTRIBUIDORES AUTORIZADOS APENAS. DISTRIBUIDORES E REVENDEDORES NO SO AGENTES DA MUSIC GROUP E NO TM AUTORIDADE ALGUMA PARA OBRIGAR A MUSIC GROUP A QUALQUER TAREFA OU REPRESENTAO EXPRESSA OU IMPLCITA. ESTE MANUAL TEM DIREITOS AUTORAIS. PARTE ALGUMA DESTE MANUAL PODE SER REPRODUZIDA OU TRANSMITIDA DE QUALQUER FORMA OU MEIO, ELETRNICO OU MECNICO, INCLUINDO FOTOCPIA E GRAVAO DE QUALQUER TIPO, PARA QUALQUER INTENO, SEM A PERMISSO ESCRITA EXPRESSA DE MUSIC GROUP IP LTD.

TODOS DIREITOS RESERVADOS. 2013 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, Ilhas Virgens Britnicas

Para obter os termos de garantia aplicveis e condies e informaes adicionais a respeito da garantia limitada do MUSIC group, favor verifi car detalhes na ntegra atravs do website www.music-group.com/warranty.

8 9EUROLIVE B1220DSP Quick Start Guide

EUROLIVE B1220DSP Controls

(3) (4)(2) (7) (8) (9)(10)

(1) (11) (12) (6)(13) (5)

(EN) Controls

(1) Power is supplied via an IEC connector.

(2) Use the POWER switch to turn on the B1220DSP.

(3) Use the LEVEL control to adjust the signal gain of the MIC/LINE inputs.

(4) The CLIP LED lights up when the input signal level is too high.

(5) Use the MIC/LINE inputs (XLR connectors) for connecting audio signals.

(6) The LINE OUT XLR jack provides the signal with no additional gain applied in order to connect another loudspeaker, for example.

(7) Use the EQ HIGH control to cut or boost the treble range by 15 dB. The cut-off frequency is 12 kHz.

(8) Use the EQ LOW control to cut or boost the bass range by 15 dB. The cut-off frequency is 100 Hz.

(9) The B1220DSP features a high-pass filter with a slope of 24 dB/oct. to eliminate unwanted low-frequency content, such as pop sounds produced by hand-held microphones, or rumble or wind noise when using high- sensitivity microphones. The LOW CUT control adjusts the cut-off frequency.

(10) The CONTOUR switch governs the dynamic contour filter:

SPEECH Setting the CONTOUR switch to SPEECH

(switch not pressed) will optimize the frequency response for speech applications.

MUSIC Setting the CONTOUR switch to MUSIC

(switch pressed) will optimize the frequency response for music playback.

(11) The TIMED TURNOFF switch activates the automatic turn-off function:

ON When the switch is actuated (ON position),

the automatic switch-off is active. The loudspeaker is turned off auto matically when it receives no signal for more than 3 minutes. As soon as a signal is received, the loudspeaker is switched back on.

OFF If the switch is not actuated (OFF position)

then the speaker remains switched on and can only be deactivated via the POWER switch (2).

(12) A noise-gate allows you to eliminate unwanted noise during signal pauses.

(13) The TH LED lights up as soon as the signal level drops below the threshold value adjusted with the NOISE GATE control (12) (the noise-gate closes).

Check Out behringer.com for Full Manual

(ES) Controles

(1) La conexin a la red elctrica se realiza mediante el cable de red con conector IEC estndar suministrado.

(2) Con el interruptor POWER se enciende el B1220DSP.

(3) Con los controles LEVEL se ajusta el nivel de las seales de las entradas de MIC(rfono)/ LNE(a).

(4) El LED CLIP se ilumina cuando el nivel de la seal es muy alto.

(5) Conecte las fuentes de seal en las entradas MIC/LINE (conectores XLR).

(6) En el conector XLR marcado como LINE OUT puede tomar la seal sin amplificar para, por ejemplo, enviarla a otros altavoces.

(7) El control EQ HIGH le permite aumentar o reducir hasta 15 dB los agudos de la seal. La frecuencia central corresponde a 12 kHz.

(8) El control EQ LOW le permite regular los graves de la seal, alrededor de los 100 Hz.

(9) El B1220DSP dispone de un filtro paso alto con pendiente de 24 dB/octava, mediante el cual puede eliminar ruidos indeseados en las frecuencias bajas, como zumbidos, o ruidos captados por micrfonos muy sensibles, por ejemplo. Con el control LOW CUT determina la frecuencia de corte del filtro.

(10) Con el botn CONTOUR activa el filtro dinmico de contorno:

SPEECH Si el botn CONTOUR est en la posicin

SPEECH (botn no presionado), la respuesta en frecuencia est optimizada para aplicaciones vocales.

MUSIC Si el botn est en la posicin MUSIC

(botn presionado) la respuesta en frecuencia est optimizada para la reproduccin de msica.

(11) El botn TIMED TURNOFF regula el apagado automtico del altavoz:

ON Si est pulsado el botn (posicin ON)

la funcin de apagado automtico est activada. El altavoz se apaga automtica- mente al detectar una pausa de ms de 3 minutos. En cuanto detecta una seal se enciende automticamente.

OFF Si el botn no est pulsado (posicin OFF) el

altavoz est siempre activo y slo se puede desactivar con el interruptor de encendido POWER (2).

(12) Una puerta de ruido le permite atenuar los ruidos en la seal que caigan por debajo de un umbral determinado.

(13) El LED TH(reshold, ingls = umbral) se ilumina cuando el nivel de la seal cae por debajo del valor establecido con el control NOISE GATE (12), es decir, cuando se cierra la puerta de ruido.

Si quiere acceder al manual de instrucciones completo, vaya a la pgina web behringer.com

(FR) Rglages

(1) On effectue la liaison avec la tension secteur par lintermdiaire de lembase IEC standard et du cordon dalimentation fourni.

(2) Appuyez sur POWER pour allumer ou teindre votre enceinte.

(3) Les potentiomtres LEVEL rglent la pramplification des entres MIC/LINE.

(4) La LED CLIP sallume lorsque le niveau du signal source est trop lev.

(5) Cblez vos sources audio aux entres MIC/ LINE sur XLR.

(6) La sortie LINE OUT sur XLR dlivre le signal non amplifi. On peut utiliser ce signal par exemple pour alimenter une enceinte supplmentaire.

(7) Utilise le bouton EQ HIGH pour modifier le niveau des aigus. La frquence centrale du filtre est 12 kHz.

(8) Le bouton EQ LOW sert la variation du volume des graves autour de la frquence centrale 100 Hz.

(9) La B1220DSP possde un filtre passe-haut pente raide (24 dB/oct.) qui permet de supprimer le bruit rsiduel basse frquence rsultant de prises de son par micro (bruits de manipulation de micros, vibrations du sol, etc.). Utilisez le bouton LOW CUT pour dterminer la frquence de coupure du filtre passe-haut.

(10) Utilisez le slecteur CONTOUR pour rgler le filtre dynamique :

SPEECH Lorsque la touche CONTOUR est en position

SPEECH (touche relche), la rponse en frquence est optimise pour la diffusion de voix.

MUSIC Lorsque la touche CONTOUR est en position

MUSIC (touche enfonce), la rponse en frquence est optimise pour la diffusion de musique.

(11) On active la fonction de mise en veille automatique de lenceinte avec la touche TIMED TURNOFF :

ON Lorsque la touche est enfonce (position

ON), la fonction dextinction automatique est active. Dans ce cas, lenceinte se met en veille automatiquement lors des interruptions de signal de plus de 3 minutes. Lenceinte se remet automatiquement en marche ds quun signal lalimente nouveau.

OFF Lorsque la touche est relche (position

OFF), lenceinte reste toujours allume et ne peut tre teinte quavec le commutateur POWER (2).

(12) Le noise gate permet de supprimer le bruit rsiduel pendant les pauses du signal.

(13) La LED TH (pour Threshold = seuil) sallume ds que le noise geate sactive, autrement dit ds que le niveau du signal passe sous le niveau seuil rgl avec la commande (12).

Consultez le site behringer.com pour tlcharger le mode demploi complet

10 11EUROLIVE B1220DSP Quick Start Guide

EUROLIVE B1220DSP Controls

(DE) Bedienelemente

(1) Die Netzverbindung erfolgt ber eine IEC-Kaltgerte-buchse.

(2) Mit dem POWER-Schalter nehmen Sie die B1220DSP in Betrieb.

(3) Mit den LEVEL-Reglern stellen Sie die Signalverstrkung der MIC/LINE-Eingnge ein.

(4) Die CLIP-LED leuchtet auf, wenn das Eingangssignal zu hoch ausgesteuert ist.

(5) Schlieen Sie Ihre Audiosignale an die MIC/LINE-Eingnge an (XLR-Anschlsse).

(6) An der mit LINE OUT bezeichneten XLR- Buchse kann das unverstrkte Signal abgegriffen werden, um beispielsweise einen weiteren Lautsprecher anzuschlieen. Das Ausgangs signal ist eine Mischung beider Eingangs signale

(7) Mit EQ HIGH knnen Sie den Hhenanteil um 15 dB anheben oder absenken. Die Einsatzfrequenz liegt bei 12 kHz.

(8) Mit dem EQ LOW-Regler knnen Sie die Bsse im Bereich von 100 Hz einstellen.

(9) Die B1220DSP verfgt ber ein steilflankiges Hochpass filter (24 dB/Okt.), mit dem Sie unerwnschte, tieff requente Signal anteile, wie z. B. Griff gerusche von Hand mikros, Trittschall oder Wind gerusche bei empfindlichen Mikrofonen eliminieren knnen. Mit dem LOW CUT-Regler stellen Sie die Grenz frequenz ein.

(10) Mit dem CONTOUR-Schalter stellen Sie das dynamische Contour-Filter ein:

SPEECH Steht der CONTOUR-Schalter auf SPEECH

(engl. = Sprache; Schalter nicht gedrckt), ist der Frequenzgang fr Sprach- anwendungen optimiert.

MUSIC In der Stellung MUSIC (Schalter

gedrckt) ist der Frequenz gang fr die Musikwiedergabe optimiert.

(11) Die Ausschaltautomatik wird mit dem TIMED TURNOFF-Schalter aktiviert:

ON Ist der Schalter gedrckt, (Stellung ON),

so ist die Ausschalt automatik aktiv. Der Lautsprecher wird in Signal pausen von mehr als 3 Minuten automatisch ausgeschaltet. Sobald ein Signal anliegt, wird er wieder eingeschaltet.

OFF Ist der Schalter nicht gedrckt (Stellung OFF),

so ist der Lautsprecher immer eingeschaltet und kann nur mit dem POWER-Schalter (2) deaktiviert werden.

(12) Mit einem Noise-Gate knnen Nebengerusche in Signal pausen unterdrckt werden.

(13) Die mit TH (fr Threshold, engl. = Schwelle) bezeichnete LED leuchtet auf, sobald der Pegel den mit (12) eingestellen Threshold-Wert unterschreitet (das Noise Gate schliet).

Das komplette Handbuch finden Sie unter behringer.com

(PT) Controles

(1) A ligao de rede dispe de um conector para dispositivos frios IEC.

(2) Com o interruptor POWER, o EUROLIVE colocado em funcionamento.

(3) Com o regulador LEVEL, ajusta a intensidade do sinal das entradas MIC/LINE.

(4) O LED CLIP acende-se quando o sinal de entrada estiver com uma regulao demasiado elevada.

(5) Ligue os seus sinais udio s entradas MIC/ LINE (ligaes XLR).

(6) No conector XLR assinalado com LINE OUT, o sinal no amplificado pode ser utilizado, por exemplo para ligar outra coluna.

(7) Com EQ HIGH, pode aumentar ou reduzir os altos para 15 dB. A frequncia de entrada est situada em 12 kHz.

(8) Com o regulador EQ LOW, podem ser definidos os baixos em 100 Hz.

(9) O B1220DSP dispe de um filtro de passagem alta (24 dB/Oit.), com o qual pode eliminar partes do sinal indesejadas, como, por exemplo, rudo de botes de microfones manuais, rudo subsnico ou rudo de vento, de microfones sensveis. Com o regulador LOW CUT, pode ajustar a frequncia de corte.

(10) Com o interruptor CONTOUR, pode ajustar o filtro de contorno dinmico:

SPEECH Se o interruptor CONTOUR estiver regulado

para SPEECH (em ingls; interruptor no premido), a frequncia de resposta optimizada para a aplicao de voz.

MUSIC Na regulao MUSIC (interruptor premido),

 optimizado o intervalo de frequncia para a reproduo de msica.

(11) O desligar automtico activado com o interruptor TIMED TURNOFF:

ON Se o interruptor estiver pressionado (posio

ON), o desligamento automtico est activo. A coluna auto maticamente desligada, com uma pausa de sinal de mais de 3 minutos. Logo que um sinal detectado, a coluna novamente ligada.

OFF Se o interruptor no estiver pressionado

(posio OFF), o altifalante est sempre ligado e s pode ser desligado com o interruptor POWER (2).

(12) Com um Noise Gate, os rudos laterais podem ser suprimidos em pausas de sinal.

(13) O LED identificado com TH (de threshold, limiar em ingls) acende-se logo que o nvel ultrapasse o valor de limiar definido com (12) (o Noise Gate encerra).

Verifique o site behringer.com para obter o manual completo Full Manual

12 EUROLIVE B1220DSP Quick Start Guide 13

Specifications Especificaciones tcnicas Audio Inputs

MIC/LINE (2) XLR (balanced) Input impedance 27 kOhm Sensitivity -40 to +10 dBu

Audio Outputs

LINE OUT XLR (balanced) Output impedance 120 Ohm

Processing

DSP 24-bit Motorola AD/DA converter 24-bit / 48 kHz Limiter dual protection for woofer and driver Dynamic EQ dual parametric EQs NOISE GATE variable (off to -30 dB) TIMED TURNOFF switchable (3 min < -45 dBr) CONTOUR switchable speech / music contour EQ HIGH 15 dB (12 kHz) EQ LOW 15 dB (100 Hz) LOW CUT 40 - 160 Hz (24 dB/Oct.)

Loudspeaker System Data

Frequency range 45 Hz to 20 kHz Crossover Butterworth, 1.7 kHz, 24 dB/Oct. Max. sound pressure level 127 dB @ 1 m Dispersion angle 90 x 45

Output Power

Low-Frequency Range

RMS @ 1% THD 320 W @ 8 Ohm Peak Power 460 W @ 8 Ohm

High-Frequency Range

RMS @ 1% THD 80 W @ 8 Ohm Peak Power 140 W @ 8 Ohm

Power Supply

Mains Voltage/Fuses

100 V~, 50/60 Hz T 6,3 A H 250 V 120 V~, 60 Hz T 6,3 A H 250 V 220 V~, 50 Hz T 4,0 A H 250 V 230 V~, 50 Hz T 4,0 A H 250 V Power consumption max. 650 W Mains connector Standard IEC receptacle

Dimensions/Weight

Dimensions (W x H x D) approx. 397 x 638 x 406 mm approx. (15.5 x 25.1 x 16")

Weight approx. 31.3 kg (68 lbs)

Entradas

MIC/LINE (2) XLR, balanceados Resistencia de entrada aprox. 27 kOhm Sensibilidad -40 a +10 dBu

Salidas

LINE OUT XLR balanceados Resistencia de salida aprox. 120 Ohm

Procesamiento

DSP Motorola de 24 bits Convertidor AD/DA 24 bits / 48 kHz Limitador proteccin dual para woofer y tweeter EQ dinmico dos ecualizadores paramtricos PUERTA DE RUIDO variable (hasta -30 dB) APAGADO PROGRAMADO conmutable (3 min. < -45 dBr) CONTORNO seleccionable para habla / msica EQ HIGH 15 dB (12 kHz) EQ LOW 15 dB (100 Hz) LOW CUT 40 - 160 Hz (24 dB/Okt.)

Datos de Sistema

Rango de frecuencia 45 Hz a 20 kHz Divisor de frecuencias 1,7 kHz. Butterworth, 24 dB/octava Nivel de presin sonora mx. 127 dB @ 1 m Dispersin 90 x 45

Potencia de Salida

Woofer

RMS @ 1% THD 320 W @ 8 Ohm Potencia de pico 460 W @ 8 Ohm

Tweeter

RMS @ 1% THD 80 W @ 8 Ohm Potencia de pico 140 W @ 8 Ohm

Suministro de Corriente

Tensin de Red/Fusible

100 V~, 50/60 Hz T 6,3 A H 250 V 120 V~, 60 Hz T 6,3 A H 250 V 220 V~, 50 Hz T 4,0 A H 250 V 230 V~, 50 Hz T 4,0 A H 250 V Consumo de potencia mx. 650 W Conexin de red conector IEC estndar

Dimensiones/Peso

Dimensiones (anch. x alt. x prof)

aprox. 397 x 638 x 406 mm aprox. (15,5 x 25,1 x 16")

Peso aprox. 31,3 kg (68 lbs)

14 EUROLIVE B1220DSP Quick Start Guide 15

Caractristiques techniques Technische Daten Entrees Audio

MIC/LINE (2) Connecteurs XLR symtriques Impdance dentre 27 kOhms Sensibilit De -40 +10 dBu

Sortie Audio

LINE OUT Connecteur XLR symtrique Impdance de sortie 120 Ohms

Traitements

DSP Motorola 24 bits Convertisseur AN/NA 24 bits / 48 kHz Limiteur Double protection pour le woofer et le moteur Egaliseur dynamique Double galiseur paramtrique NOISE GATE Variable (de off -30 dB) TIMED TURNOFF Commutable (3 min < -45 dBr) CONTOUR Contour Speech/Music commutable EQ HIGH 15 dB (12 kHz) EQ LOW 15 dB (100 Hz) LOW CUT 40 - 160 Hz (24 dB/Okt.)

Caracteristiques du Systeme

Bande passante De 45 Hz 20 kHz Frquence de coupure 1,7 kHz, Butterworth, 24 dB/Oct. Pression acoustique max. 127 dB @ 1 m Dispersion 90 x 45

Puissance de Sortie

Bande des Graves

RMS @ 1% THD 320 W @ 8 ohms Puissance crte 460 W @ 8 ohms

Bande des Aigus

RMS @ 1% THD 80 W @ 8 Ohm Puissance crte 140 W @ 8 ohms

Alimentation Electrique

Tension Secteur/Fusible

100 V~, 50/60 Hz T 6,3 A H 250 V 120 V~, 60 Hz T 6,3 A H 250 V 220 V~, 50 Hz T 4,0 A H 250 V 230 V~, 50 Hz T 4,0 A H 250 V

Dimensions/Poids

Dimensions (L x H x P) 397 x 638 x 406 mm (15,5 x 25,1 x 16")

Poids 31,3 kg (68 lbs)

Audioeingnge

MIC/LINE (2) XLR (symmetrisch) Eingangswiderstand 27 kOhm Empfindlichkeit -40 bis +10 dBu

Audioausgang

LINE OUT XLR (symmetrisch) Ausgangswiderstand 120 Ohm

Prozessor

DSP 24-Bit Motorola AD/DA-Wandler 24-Bit/48 kHz Limiter Zweifachschutz fr Tieftner und Hochtner Dynamic EQ zweifacher parametrischer EQ NOISE GATE variabel (off bis -30 dB) TIMED TURNOFF schaltbar (3 Min. < -45 dBr) CONTOUR schaltbar Musik/Sprache EQ HIGH 15 dB (12 kHz) EQ LOW 15 dB (100 Hz) LOW CUT 40 - 160 Hz (24 dB/Okt.)

Lautsprecher-Systemdaten

Frequenzbereich 45 Hz bis 20 kHz Frequenzweiche Butterworth; 1,7 kHz; 24 dB/Okt. Max. Schalldruck 127 dB @ 1 m Dispersion 90 x 45

Ausgangsleistung

Bassbereich

RMS @ 1% THD 320 W @ 8 Ohm Spitzenleistung 460 W @ 8 Ohm

Hochtonbereich

RMS @ 1% THD 80 W @ 8 Ohm Spitzenleistung 140 W @ 8 Ohm

Stromversorgung

Netzspannung/Sicherung

100 V~, 50/60 Hz T 6,3 A H 250 V 120 V~, 60 Hz T 6,3 A H 250 V 220 V~, 50 Hz T 4,0 A H 250 V 230 V~, 50 Hz T 4,0 A H 250 V Leistungsaufnahme max. 650 W Netzanschluss Standard-Kaltgerteanschluss

Abmessungen/Gewicht

Abmessungen (B x H x T) ca. 397 x 638 x 406 mm ca. (15,5 x 25,1 x 16")

Gewicht ca. 31,3 kg (68 lbs)

16 EUROLIVE B1220DSP Quick Start Guide 17

Other important information

1. Register online. Please register your new MUSIC Group equipment right after you purchase it by visiting behringer. com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.

2. Malfunction. Should your MUSIC Group Authorized Reseller not be located in your vicinity, you may contact the MUSIC Group Authorized Fulfiller for your country listed under Support at behringer. com. Should your country not be listed, please check if your problem can be dealt with by our Online Support which may also be found under Support at behringer. com. Alternatively, please submit an online warranty claim at behringer. com BEFORE returning the product.

3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

1. Registro online. Le recomendamos que registre su nuevo aparato MUSIC Group justo despus de su compra accediendo a la pgina web behringer. com. El registro de su compra a travs de nuestro sencillo sistema online nos ayudar a resolver cualquier incidencia que se presente a la mayor brevedad posible. Adems, aproveche para leer los trminos y condiciones de nuestra garanta, si es aplicable en su caso.

2. Averas. En el caso de que no exista un distribuidor MUSIC Group en las inmediaciones, puede ponerse en contacto con el distribuidor MUSIC Group de su pas, que encontrar dentro del apartado Support de nuestra pgina web behringer. com. En caso de que su pas no aparezca en ese listado, acceda a la seccin Online Support (que tambin encontrar dentro del apartado Support de nuestra pgina web) y compruebe si su problema aparece descrito y solucionado all. De forma alternativa, envenos a travs de la pgina web una solicitud online de soporte en periodo de garanta ANTES de devolvernos el aparato.

3. Conexiones de corriente. Antes de enchufar este aparato a una salida de corriente, asegrese de que dicha salida sea del voltaje adecuado para su modelo concreto. En caso de que deba sustituir un fusible quemado, deber hacerlo por otro de idnticas especificaciones, sin excepcin.

1. Enregistrez-vous en ligne. Prenez le temps denregistrer votre produit MUSIC Group aussi vite que possible sur le site Internet behringer. com. Le fait denregistrer le produit en ligne nous permet de grer les rparations plus rapidement et plus efficacement. Prenez galement le temps de lire les termes et conditions de notre garantie.

2. Dysfonctionnement. Si vous navez pas de revendeur MUSIC Group prs de chez vous, contactez le distributeur MUSIC Group de votre pays : consultez la liste des distributeurs de votre pays dans la page Support de notre site Internet behringer. com. Si votre pays nest pas dans la liste, essayez de rsoudre votre problme avec notre aide en ligne que vous trouverez galement dans la section Support du site behringer. com. Vous pouvez galement nous faire parvenir directement votre demande de rparation sous garantie par Internet sur le site behringer. com AVANT de nous renvoyer le produit.

3. Raccordement au secteur. Avant de relier cet quipement au secteur, assurez-vous que la tension secteur de votre rgion soit compatible avec lappareil. Veillez remplacer les fusibles uniquement par des modles exactement de mme taille et de mme valeur lectrique sans aucune exception.

1. Online registrieren. Bitte registrieren Sie Ihr neues MUSIC Group-Gert direkt nach dem Kauf auf der Website behringer. com. Wenn Sie Ihren Kauf mit unserem einfachen online Formular registrieren, knnen wir Ihre Reparaturansprche schneller und effizienter bearbeiten. Lesen Sie bitte auch unsere Garantiebedingungen, falls zutreffend.

2. Funktionsfehler. Sollte sich kein MUSIC Group Hndler in Ihrer Nhe befinden, knnen Sie den MUSIC Group Vertrieb Ihres Landes kontaktieren, der auf behringer. com unter Support aufgefhrt ist. Sollte Ihr Land nicht aufgelistet sein, prfen Sie bitte, ob Ihr Problem von unserem Online Support gelst werden kann, den Sie ebenfalls auf behringer. com unter Support finden. Alternativ reichen Sie bitte Ihren Garantieanspruch online auf behringer. com ein, BEVOR Sie das Produkt zurcksenden.

3. Stromanschluss. Bevor Sie das Gert an eine Netzsteckdose anschlieen, prfen Sie bitte, ob Sie die korrekte Netzspannung fr Ihr spezielles Modell verwenden. Fehlerhafte Sicherungen mssen ausnahmslos durch Sicherungen des gleichen Typs und Nennwerts ersetzt werden.

1. Registre-se online. Por favor, registre seu novo equipamento MUSIC Group logo aps a compra visitando o site behringer. com Registrar sua compra usando nosso simples formulrio online nos ajuda a processar seus pedidos de reparos com maior rapidez e eficincia. Alm disso, leia nossos termos e condies de garantia, caso seja necessrio.

2. Funcionamento Defeituoso. Caso seu fornecedor MUSIC Group no esteja localizado nas proximidades, voc pode contatar um distribuidor MUSIC Group para o seu pas listado abaixo de Suporte em behringer. com. Se seu pas no estiver na lista, favor checar se seu problema pode ser resolvido com o nosso Suporte Online que tambm pode ser achado abaixo de Suporteem behringer. com. Alternativamente, favor enviar uma solicitao de garantia online em behringer. com ANTES da devoluo do produto.

3. Ligaes. Antes de ligar a unidade tomada, assegure-se de que est a utilizar a voltagem correcta para o modelo em questo. Os fusveis com defeito tero de ser substitudos, sem qualquer excepo, por fusveis do mesmo tipo e corrente nominal.

Important information

Aspectos importantes

Informations importantes

Weitere wichtige Informationen

Outras Informaes Importantes

Dados tcnicos Entrada Audio

MIC/LINE (2) Ligao XLR (simtrico) Impedncia de entrada 27 kOhm Sensibilidade -40 a +10 dBu

Sada Audio

LINE OUT Ligao XLR (simtrico) Impedncia de sada 120 Ohm

Processamento

DSP 24-bit Motorola AD/DA converter 24-bit / 48 kHz Limiter proteco dupla para woofer e driver Dynamic EQ EQ duplo paramtrico NOISE GATE varivel (desactivado at -30 dB) TIMED TURNOFF regulvel (3 min < -45 dBr) CONTOUR contorno regulvel de voz/msica EQ HIGH 15 dB (12 kHz) EQ LOW 15 dB (100 Hz) LOW CUT 40 - 160 Hz (24 dB/Oct.)

Dados do Sistema

Intervalo de frequncia 45 Hz a 20 kHz Frequncia de recepo 1,7 kHz, Butterworth, 24 dB/Oit. Presso mxima acstica 127 dB @ 1 m Corneta (disperso) 90 x 45

Potncia de Sada

Intervalo de Baixas Frequncias

RMS @ 1% THD 320 W @ 8 Ohm Potncia de ponta 460 W @ 8 Ohm

Intervalo de Altas Frequncias

RMS @ 1% THD 80 W @ 8 Ohm Potncia de ponta 140 W @ 8 Ohm

Alimentao Elctrica

Tenso de Rede/Fusvel

100 V~, 50/60 Hz T 6,3 A H 250 V 120 V~, 60 Hz T 6,3 A H 250 V 220 V~, 50 Hz T 4,0 A H 250 V 230 V~, 50 Hz T 4,0 A H 250 V Consumo de potncia mx. 650 W Ligao rede Standard-ligao do aparelho isolada

Dimenses/Peso

Dimenses (L x A x P) 397 x 638 x 406 mm (15,5 x 25,1 x 16")

Peso 31,3 kg (68 lbs)

Quick Start Guide 1918 EUROLIVE B1220DSP

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Responsible Party Name: MUSIC Group Services US Inc.

Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA

Phone Number: +1 425 672 0816

EUROLIVE B1220DSP

complies with the FCC rules as mentioned in the following paragraph:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

Consult the dealer or an experienced radio/TV technician for help

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interferenc

Manualsnet FAQs

If you want to find out how the B1220DSP Behringer works, you can view and download the Behringer B1220DSP Quick Start Guide on the Manualsnet website.

Yes, we have the Quick Start Guide for Behringer B1220DSP as well as other Behringer manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a Behringer B1220DSP. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Behringer B1220DSP Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Behringer B1220DSP Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Behringer B1220DSP Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Behringer B1220DSP Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Behringer B1220DSP Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.