Behringer B115MP3 Quick Start Guide PDF

1 of 13
1 of 13

Summary of Content for Behringer B115MP3 Quick Start Guide PDF

Quick Start Guide

EUROLIVE B115MP3/B112MP3 Active 1000-Watt 2-Way 15"/12" PA Speaker System with MP3 Player, Wireless Option and Integrated Mixer

2 Quick Start Guide 3EUROLIVE B115MP3/B112MP3

Important Safety Instructions

LEGAL DISCLAIMER

Instrucciones de seguridad

NEGACIN LEGAL

GARANTA LIMITADA

LIMITED WARRANTY

Terminals marked with this symbol carry

electrical current of suffi cient magnitude

to constitute risk of electric shock.

Use only high-quality professional speaker cables with

" TS or twist-locking plugs pre-installed. All other

installation or modifi cation should be performed only

by qualifi ed personnel.

This symbol, wherever it appears,

alerts you to the presence of uninsulated

dangerous voltage inside the

enclosure - voltage that may be suffi cient to constitute a

risk of shock.

This symbol, wherever it appears,

alerts you to important operating and

maintenance instructions in the

accompanying literature. Please read the manual.

Caution To reduce the risk of electric shock, do not

remove the top cover (or the rear section).

No user serviceable parts inside. Refer servicing to

qualifi ed personnel.

Caution To reduce the risk of fi re or electric shock,

do not expose this appliance to rain and

moisture. The apparatus shall not be exposed to dripping

or splashing liquids and no objects fi lled with liquids,

such as vases, shall be placed on the apparatus.

Caution These service instructions are for use

by qualifi ed service personnel only.

To reduce the risk of electric shock do not perform any

servicing other than that contained in the operation

instructions. Repairs have to be performed by qualifi ed

service personnel.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturers instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifi ers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding-type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If the

provided plug does not fi t into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Use only attachments/accessories specifi ed by

the manufacturer.

12. Use only with the

cart, stand, tripod, bracket,

or table specifi ed by the

manufacturer, or sold with

the apparatus. When a cart

is used, use caution when

moving the cart/apparatus

combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualifi ed service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power supply cord or plug

is damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed

to rain or moisture, does not operate normally, or has

been dropped.

15. The apparatus shall be connected to a MAINS socket

outlet with a protective earthing connection.

16. Where the MAINS plug or an appliance coupler is

used as the disconnect device, the disconnect device shall

remain readily operable.

17. Correct disposal of this

product: This symbol indicates that

this product must not be disposed

of with household waste,

according to the WEEE Directive

(2012/19/EU) and your national

law. This product should be taken

to a collection center licensed for the recycling of waste

electrical and electronic equipment (EEE). The

mishandling of this type of waste could have a possible

negative impact on the environment and human health

due to potentially hazardous substances that are generally

associated with EEE. At the same time, your cooperation

in the correct disposal of this product will contribute to

the effi cient use of natural resources. For more

information about where you can take your waste

equipment for recycling, please contact your local city

offi ce, or your household waste collection service.

18. Do not install in a confi ned space, such as a book

case or similar unit.

19. Do not place naked fl ame sources, such as lighted

candles, on the apparatus.

20. Please keep the environmental aspects of battery

disposal in mind. Batteries must be disposed-of at a

battery collection point.

21. Use this apparatus in tropical and/or

moderate climates.

MUSIC Group accepts no liability for any loss which

may be suff ered by any person who relies either

wholly or in part upon any description, photograph,

or statement contained herein. Technical specifi cations,

appearances and other information are subject to

change without notice. All trademarks are the property

of their respective owners. MIDAS, KLARK TEKNIK,

LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND,

TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA

and DDA are trademarks or registered trademarks

of MUSIC Group IP Ltd. MUSIC Group IP Ltd.

2017 All rights reserved.

For the applicable warranty terms and conditions

and additional information regarding MUSIC Groups

Limited Warranty, please see complete details online at

music-group.com/warranty.

Las terminales marcadas con este smbolo

transportan corriente elctrica de

magnitud sufi ciente como para constituir

un riesgo de descarga elctrica. Utilice solo cables de

altavoz profesionales y de alta calidad con conectores

TS de 6,3 mm o de bayoneta prefi jados. Cualquier otra

instalacin o modifi cacin debe ser realizada nicamente

por un tcnico cualifi cado.

Este smbolo, siempre que aparece,

le advierte de la presencia de voltaje

peligroso sin aislar dentro de la caja;

este voltaje puede ser sufi ciente para constituir un riesgo

de descarga.

Este smbolo, siempre que aparece,

le advierte sobre instrucciones operativas

y de mantenimiento que aparecen en la

documentacin adjunta. Por favor, lea el manual.

Atencin Para reducir el riesgo de descarga

elctrica, no quite la tapa (o la parte

posterior). No hay piezas en el interior del equipo que

puedan ser reparadas por el usuario. Si es necesario,

pngase en contacto con personal cualifi cado.

Atencin Para reducir el riesgo de incendio o

descarga elctrica, no exponga este

aparato a la lluvia, humedad o alguna otra fuente que

pueda salpicar o derramar algn lquido sobre el aparato.

No coloque ningn tipo de recipiente para lquidos sobre

el aparato.

Atencin Las instrucciones de servicio deben

llevarlas a cabo exclusivamente personal

cualifi cado. Para evitar el riesgo de una descarga elctrica,

no realice reparaciones que no se encuentren descritas

en el manual de operaciones. Las reparaciones deben ser

realizadas exclusivamente por personal cualifi cado.

1. Lea las instrucciones.

2. Conserve estas instrucciones.

3. Preste atencin a todas las advertencias.

4. Siga todas las instrucciones.

5. No use este aparato cerca del agua.

6. Limpie este aparato con un pao seco.

7. No bloquee las aberturas de ventilacin. Instale el

equipo de acuerdo con las instrucciones del fabricante.

8. No instale este equipo cerca de fuentes de calor

tales como radiadores, acumuladores de calor, estufas u

otros aparatos (incluyendo amplifi cadores) que puedan

producir calor.

9. No elimine o deshabilite nunca la conexin a tierra

del aparato o del cable de alimentacin de corriente.

Un enchufe polarizado tiene dos polos, uno de los cuales

tiene un contacto ms ancho que el otro. Una clavija con

puesta a tierra dispone de tres contactos: dos polos y la

puesta a tierra. El contacto ancho y el tercer contacto,

respectivamente, son los que garantizan una mayor

seguridad. Si el enchufe suministrado con el equipo no

concuerda con la toma de corriente, consulte con un

electricista para cambiar la toma de corriente obsoleta.

10. Coloque el cable de suministro de energa de manera

que no pueda ser pisado y que est protegido de objetos

afi lados. Asegrese de que el cable de suministro de

energa est protegido, especialmente en la zona de la

clavija y en el punto donde sale del aparato.

11. Use nicamente los dispositivos o accesorios

especifi cados por el fabricante.

12. Use nicamente la

carretilla, plataforma,

trpode, soporte o mesa

especifi cados por el

fabricante o suministrados

junto con el equipo.

Al transportar el equipo,

tenga cuidado para evitar

daos y cadas al tropezar con algn obstculo.

13. Desenchufe el equipo durante tormentas o si no va a

utilizarlo durante un periodo largo.

14. Confe las reparaciones nicamente a servicios

tcnicos cualifi cados. La unidad requiere mantenimiento

siempre que haya sufrido algn dao, si el cable de

suministro de energa o el enchufe presentaran daos,

se hubiera derramado un lquido o hubieran cado objetos

dentro del equipo, si el aparato hubiera estado expuesto

a la humedad o la lluvia, si ha dejado de funcionar de

manera normal o si ha sufrido algn golpe o cada.

15. Al conectar la unidad a la toma de corriente elctrica

asegrese de que la conexin disponga de una unin

a tierra.

16. Si el enchufe o conector de red sirve como nico

medio de desconexin, ste debe ser accesible fcilmente.

17. Cmo debe deshacerse de

este aparato: Este smbolo indica

que este aparato no debe ser

tratado como basura orgnica,

segn lo indicado en la Directiva

WEEE (2012/19/EU) y a las

normativas aplicables en su pas.

En lugar de ello deber llevarlo al punto limpio ms

cercano para el reciclaje de sus elementos elctricos /

electrnicos (EEE). Al hacer esto estar ayudando a

prevenir las posibles consecuencias negativas para el

medio ambiente y la salud que podran ser provocadas por

una gestin inadecuada de este tipo de aparatos. Adems,

el reciclaje de materiales ayudar a conservar los recursos

naturales. Para ms informacin acerca del reciclaje de

este aparato, pngase en contacto con el Ayuntamiento

de su ciudad o con el punto limpio local.

18. No instale esta unidad en un espacio muy reducido,

tal como encastrada en una librera o similar.

19. No coloque objetos con llama, como una vela

encendida, sobre este aparato.

20. Tenga presentes todas las advertencias relativas

al reciclaje y correcta eliminacin de las pilas. Las pilas

deben ser siempre eliminadas en un punto limpio y nunca

con el resto de la basura orgnica.

21. Use este aparato en rangos de temperatura

moderados y/o tropicales.

MUSIC Group no admite ningn tipo de responsabilidad

por cualquier dao o prdida que pudiera sufrir

cualquier persona por confi ar total o parcialmente en la

descripciones, fotografas o afi rmaciones contenidas en

este documento. Las especifi caciones tcnicas, imgenes

y otras informaciones contenidas en este documento

estn sujetas a modifi caciones sin previo aviso. Todas las

marcas comerciales que aparecen aqu son propiedad

de sus respectivos dueos. MIDAS, KLARK TEKNIK,

LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND,

TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA

y DDA son marcas comerciales o marcas registradas

de MUSIC Group IP Ltd. MUSIC Group IP Ltd.

2017 Reservados todos los derechos.

Si quiere conocer los detalles y condiciones aplicables

de la garanta as como informacin adicional sobre la

Garanta limitada de MUSIC Group, consulte online toda la

informacin en la web music-group.com/warranty.

4 Quick Start Guide 5EUROLIVE B115MP3/B112MP3

Consignes de scurit

DNI LGAL

GARANTIE LIMITE

Wichtige Sicherheitshinweise

HAFTUNGSAUSSCHLUSS

BESCHRNKTE GARANTIE

Les points reprs par ce symbole portent

une tension lectrique suffi sante pour

constituer un risque dlectrocution.

Utilisez uniquement des cbles denceintes professionnels

de haute qualit avec fi ches Jack mono 6,35 mm ou fi ches

verrouillages dj installes. Toute autre installation ou

modifi cation doit tre eff ectue uniquement par un

personnel qualifi .

Ce symbole avertit de la prsence dune

tension dangereuse et non isole

lintrieur de lappareil - elle peut

provoquer des chocs lectriques.

Attention Ce symbol signale les consignes

dutilisation et dentre ! Tien importantes

dans la documentation fournie. Lisez les consignes de

scurit du manuel dutilisation de lappareil.

Attention Pour viter tout risque de choc lectrique,

ne pas ouvrir le capot de lappareil ni

dmonter le panneau arrire. Lintrieur de lappareil

ne possde aucun lment rparable par lutilisateur.

Laisser toute rparation un professionnel qualifi .

Attention Pour rduire les risques de feu et de choc

lectrique, nexposez pas cet appareil la

pluie, la moisissure, aux gouttes ou aux claboussures.

Ne posez pas de rcipient contenant un liquide sur

lappareil (un vase par exemple).

Attention Ces consignes de scurit et dentretien

sont destines un personnel qualifi .

Pour viter tout risque de choc lectrique, neff ectuez

aucune rparation sur lappareil qui ne soit dcrite par le

manuel dutilisation. Les ventuelles rparations doivent

tre eff ectues uniquement par un technicien spcialis.

1. Lisez ces consignes.

2. Conservez ces consignes.

3. Respectez tous les avertissements.

4. Respectez toutes les consignes dutilisation.

5. Nutilisez jamais lappareil proximit dun liquide.

6. Nettoyez lappareil avec un chiff on sec.

7. Veillez ne pas empcher la bonne ventilation de

lappareil via ses oues de ventilation. Respectez les

consignes du fabricant concernant linstallation

de lappareil.

8. Ne placez pas lappareil proximit dune source

de chaleur telle quun chauff age, une cuisinire ou tout

appareil dgageant de la chaleur (y compris un ampli

de puissance).

9. Ne supprimez jamais la scurit des prises bipolaires

ou des prises terre. Les prises bipolaires possdent deux

contacts de largeur diff rente. Le plus large est le contact

de scurit. Les prises terre possdent deux contacts plus

une mise la terre servant de scurit. Si la prise du bloc

dalimentation ou du cordon dali-mentation fourni ne

correspond pas celles de votre installation lectrique,

faites appel un lectricien pour eff ectuer le changement

de prise.

10. Installez le cordon dalimentation de telle faon

que personne ne puisse marcher dessus et quil soit

protg dartes coupantes. Assurez-vous que le cordon

dalimentation est sufsamment protg, notamment au

niveau de sa prise lectrique et de lendroit o il est reli

lappareil; cela est galement valable pour une ventuelle

rallonge lectrique.

11. Utilisez exclusivement des accessoires et des

appareils supplmentaires recommands par le fabricant.

12. Utilisez

exclusivement des

chariots, des diables,

des prsentoirs, des pieds

et des surfaces de

travail recommands

par le fabricant ou

livrs avec le produit.

Dplacez prcautionneusement tout chariot ou diable

charg pour viter dventuelles blessures en cas de chute.

13. Dbranchez lappareil de la tension secteur en cas

dorage ou si lappareil reste inutilis pendant une longue

priode de temps.

14. Les travaux dentretien de lappareil doivent

tre eff ectus uniquement par du personnel quali.

Aucun entretien nest ncessaire sauf si lappareil est

endommag de quelque faon que ce soit (dommages sur

le cordon dalimentation ou la prise par exemple), si un

liquide ou un objet a pntr lintrieur du chssis,

si lappareil a t expos la pluie ou lhumidit, sil ne

fonctionne pas correctement ou la suite dune chute.

15. Lappareil doit tre connect une prise secteur

dote dune protection par mise la terre.

16. La prise lectrique ou la prise IEC de tout appareil

dnu de bouton marche/arrt doit rester accessible

en permanence.

17. Mise au rebut approprie de

ce produit: Ce symbole indique

quen accord avec la directive DEEE

(2012/19/EU) et les lois en vigueur

dans votre pays, ce produit ne doit

pas tre jet avec les dchets

mnagers. Ce produit doit tre

dpos dans un point de collecte agr pour le recyclage

des dchets dquipements lectriques et lectroniques

(EEE). Une mauvaise manipulation de ce type de dchets

pourrait avoir un impact ngatif sur lenvironnement et la

sant cause des substances potentiellement

dangereuses gnralement associes ces quipements.

En mme temps, votre coopration dans la mise au rebut

de ce produit contribuera lutilisation effi cace des

ressources naturelles. Pour plus dinformations sur

lendroit o vous pouvez dposer vos dchets

dquipements pour le recyclage, veuillez contacter votre

mairie ou votre centre local de collecte des dchets.

18. Ninstallez pas lappareil dans un espace confi n tel

quune bibliothque ou meuble similaire.

19. Ne placez jamais dobjets enfl amms, tels que des

bougies allumes, sur lappareil.

20. Gardez lesprit limpact environnemental lorsque

vous mettez des piles au rebus. Les piles uses doivent

tre dposes dans un point de collecte adapt.

21. Utilisez lappareil dans un climat tropical

et/ou modr.

MUSIC Group ne peut tre tenu pour responsable pour

toute perte pouvant tre subie par toute personne

se fi ant en partie ou en totalit toute description,

photographie ou affi rmation contenue dans ce

document. Les caractristiques, lapparence et dautres

informations peuvent faire lobjet de modifi cations

sans notifi cation. Toutes les marques appartiennent

leurs propritaires respectifs. MIDAS, KLARK TEKNIK,

LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND,

TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA

et DDA sont des marques ou marques dposes

de MUSIC Group IP Ltd. MUSIC Group IP Ltd.

2017 Tous droits rservs.

Pour connatre les termes et conditions de garantie

applicables, ainsi que les informations supplmentaires

et dtailles sur la Garantie Limite de MUSIC Group,

consultez le site Internet music-group.com/warranty.

Vorsicht Die mit dem Symbol markierten

Anschlsse fhren so viel Spannung,

dass die Gefahr eines Stromschlags besteht.

Verwenden Sie nur hochwertige, professionelle

Lautsprecherkabel mit vorinstallierten 6,35 mm

MONO-Klinkensteckern oder Lautsprecherstecker

mit Drehverriegelung. Alle anderen Installationen

oder Modifi kationen sollten nur von qualifi ziertem

Fachpersonal ausgefhrt werden.

Achtung Um eine Gefhrdung durch Stromschlag

auszuschlieen, darf die Gerteabdeckung

bzw. Gerterckwand nicht abgenommen werden.

Im Innern des Gerts befi nden sich keine vom Benutzer

reparierbaren Teile. Reparaturarbeiten drfen nur von

qualifi ziertem Personal ausgefhrt werden.

Achtung Um eine Gefhrdung durch Feuer bzw.

Stromschlag auszuschlieen, darf dieses

Gert weder Regen oder Feuchtigkeit ausgesetzt werden

noch sollten Spritzwasser oder tropfende Flssigkeiten

in das Gert gelangen knnen. Stellen Sie keine mit

Flssigkeit gefllten Gegenstnde, wie z. B. Vasen,

auf das Gert.

Achtung Die Service-Hinweise sind nur durch

qualifi ziertes Personal zu befolgen.

Um eine Gefhrdung durch Stromschlag zu vermeiden,

fhren Sie bitte keinerlei Reparaturen an dem Gert

durch, die nicht in der Bedienungsanleitung beschrieben

sind. Reparaturen sind nur von qualifi ziertem

Fachpersonal durchzufhren.

1. Lesen Sie diese Hinweise.

2. Bewahren Sie diese Hinweise auf.

3. Beachten Sie alle Warnhinweise.

4. Befolgen Sie alle Bedienungshinweise.

5. Betreiben Sie das Gert nicht in der Nhe von Wasser.

6. Reinigen Sie das Gert mit einem trockenen Tuch.

7. Blockieren Sie nicht die Belftungsschlitze. Beachten

Sie beim Einbau des Gertes die Herstellerhinweise.

8. Stellen Sie das Gert nicht in der Nhe von

Wrmequellen auf. Solche Wrmequellen sind z. B.

Heizkrper, Herde oder andere Wrme erzeugende Gerte

(auch Verstrker).

9. Entfernen Sie in keinem Fall die

Sicherheitsvorrichtung von Zweipol- oder geerdeten

Steckern. Ein Zweipolstecker hat zwei unterschiedlich

breite Steckkontakte. Ein geerdeter Stecker hat zwei

Steckkontakte und einen dritten Erdungskontakt.

Der breitere Steckkontakt oder der zustzliche

Erdungskontakt dient Ihrer Sicherheit. Falls das

mitgelieferte Steckerformat nicht zu Ihrer Steckdose

passt, wenden Sie sich bitte an einen Elektriker, damit die

Steckdose entsprechend ausgetauscht wird.

10. Verlegen Sie das Netzkabel so, dass es vor

Tritten und scharfen Kanten geschtzt ist und nicht

beschdigt werden kann. Achten Sie bitte insbesondere

im Bereich der Stecker, Verlngerungskabel und an

der Stelle, an der das Netzkabel das Gert verlsst,

auf ausreichenden Schutz.

11. Das Gert muss jederzeit mit intaktem Schutzleiter

an das Stromnetz angeschlossen sein.

12. Sollte der Hauptnetzstecker oder eine

Gertesteckdose die Funktionseinheit zum Abschalten

sein, muss diese immer zugnglich sein.

13. Verwenden Sie nur Zusatzgerte/Zubehrteile,

die laut Hersteller geeignet sind.

14. Verwenden

Sie nur Wagen,

Standvorrichtungen,

Stative, Halter oder Tische,

die vom Hersteller benannt

oder im Lieferumfang

des Gerts enthalten

sind. Falls Sie einen

Wagen benutzen, seien Sie vorsichtig beim Bewegen

der Wagen- Gertkombination, um Verletzungen durch

Stolpern zu vermeiden.

15. Ziehen Sie den Netzstecker bei Gewitter oder wenn

Sie das Gert lngere Zeit nicht benutzen.

16. Lassen Sie alle Wartungsarbeiten nur von

qualifi ziertem Service-Personal ausfhren. Eine Wartung

ist notwendig, wenn das Gert in irgendeiner Weise

beschdigt wurde (z. B. Beschdigung des Netzkabels oder

Steckers), Gegenstnde oder Flssigkeit in das Gerteinnere

gelangt sind, das Gert Regen oder Feuchtigkeit ausgesetzt

wurde, das Gert nicht ordnungsgem funktioniert oder

auf den Boden gefallen ist.

17. Korrekte Entsorgung dieses

Produkts: Dieses Symbol weist

darauf hin, das Produkt

entsprechend der WEEE Direktive

(2012/19/EU) und der jeweiligen

nationalen Gesetze nicht

zusammen mit Ihren

Haushaltsabfllen zu entsorgen. Dieses Produkt sollte bei

einer autorisierten Sammelstelle fr Recycling elektrischer

und elektronischer Gerte (EEE) abgegeben werden.

Wegen bedenklicher Substanzen, die generell mit

elektrischen und elektronischen Gerten in Verbindung

stehen, knnte eine unsachgeme Behandlung dieser

Abfallart eine negative Auswirkung auf Umwelt und

Gesundheit haben. Gleichzeitig gewhrleistet Ihr Beitrag

zur richtigen Entsorgung dieses Produkts die eff ektive

Nutzung natrlicher Ressourcen. Fr weitere

Informationen zur Entsorgung Ihrer Gerte bei einer

Recycling-Stelle nehmen Sie bitte Kontakt zum

zustndigen stdtischen Bro, Entsorgungsamt oder zu

Ihrem Haushaltsabfallentsorger auf.

18. Installieren Sie das Gert nicht in einer beengten

Umgebung, zum Beispiel Bcherregal oder hnliches.

19. Stellen Sie keine Gegenstnde mit off enen

Flammen, etwa brennende Kerzen, auf das Gert.

20. Beachten Sie bei der Entsorgung von Batterien

den Umweltschutz-Aspekt. Batterien mssen bei einer

Batterie-Sammelstelle entsorgt werden.

21. Verwenden Sie das Gert in tropischen und/oder

gemigten Klimazonen.

MUSIC Group bernimmt keine Haftung fr Verluste,

die Personen entstanden sind, die sich ganz oder

teilweise auf hier enthaltene Beschreibungen,

Fotos oder Aussagen verlassen haben. Technische Daten,

Erscheinungsbild und andere Informationen knnen

ohne vorherige Ankndigung gendert werden.

Alle Warenzeichen sind Eigentum der jeweiligen

Inhaber. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE,

TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON,

BEHRINGER, BUGERA und DDA sind Warenzeichen oder

eingetragene Warenzeichen der MUSIC Group IP Ltd.

MUSIC Group IP Ltd. 2017 Alle Rechte vorbehalten.

Die geltenden Garantiebedingungen und zustzliche

Informationen bezglich der von MUSIC Group

gewhrten beschrnkten Garantie fi nden Sie online unter

music-group.com/warranty.

6 Quick Start Guide 7EUROLIVE B115MP3/B112MP3

Instrues de Segurana Importantes

LEGAL RENUNCIANTE

GARANTIA LIMITADA

Aviso! Terminais marcados com o smbolo

carregam corrente eltrica de magnitude

sufi ciente para constituir um risco de choque eltrico.

Use apenas cabos de alto-falantes de alta qualidade

com plugues TS de " ou plugues com trava de toro

pr-instalados. Todas as outras instalaes e modifi caes

devem ser efetuadas por pessoas qualifi cadas.

Este smbolo, onde quer que o encontre,

alerta-o para a leitura das instrues de

manuseamento que acompanham o

equipamento. Por favor leia o manual de instrues.

Ateno De forma a diminuir o risco de choque

elctrico, no remover a cobertura

(ou a seco de trs). No existem peas substituveis por

parte do utilizador no seu interior. Para esse efeito recorrer

a um tcnico qualifi cado.

Ateno Para reduzir o risco de incndios ou

choques elctricos o aparelho no deve ser

exposto chuva nem humidade. Alm disso, no deve

ser sujeito a salpicos, nem devem ser colocados em cima

do aparelho objectos contendo lquidos, tais como jarras.

Ateno Estas instrues de operao devem ser

utilizadas, em exclusivo, por tcnicos de

assistncia qualifi cados. Para evitar choques elctricos

no proceda a reparaes ou intervenes, que no as

indicadas nas instrues de operao, salvo se possuir as

qualifi -caes necessrias. Para evitar choques elctricos

no proceda a reparaes ou intervenes, que no as

indicadas nas instrues de operao. S o dever fazer se

possuir as qualifi caes necessrias.

1. Leia estas instrues.

2. Guarde estas instrues.

3. Preste ateno a todos os avisos.

4. Siga todas as instrues.

5. No utilize este dispositivo perto de gua.

6. Limpe apenas com um pano seco.

7. No obstrua as entradas de ventilao. Instale de

acordo com as instrues do fabricante.

8. No instale perto de quaisquer fontes de calor

tais como radiadores, bocas de ar quente, foges de

sala ou outros aparelhos (incluindo amplifi cadores)

que produzam calor.

9. No anule o objectivo de segurana das fi chas

polarizadas ou do tipo de ligao terra. Uma fi cha

polarizada dispe de duas palhetas sendo uma mais larga

do que a outra. Uma fi cha do tipo ligao terra dispe

de duas palhetas e um terceiro dente de ligao terra.

A palheta larga ou o terceiro dente so fornecidos para

sua segurana. Se a fi cha fornecida no encaixar na sua

tomada, consulte um electricista para a substituio da

tomada obsoleta.

10. Proteja o cabo de alimentao de pisadelas ou

apertos, especialmente nas fi chas, extenses, e no local

de sada da unidade. Certifi que-se de que o cabo elctrico

est protegido. Verifi que particularmente nas fi chas, nos

receptculos e no ponto em que o cabo sai do aparelho.

11. O aparelho tem de estar sempre conectado rede

elctrica com o condutor de proteco intacto.

12. Se utilizar uma fi cha de rede principal ou uma

tomada de aparelhos para desligar a unidade de

funcionamento, esta deve estar sempre acessvel.

13. Utilize apenas ligaes/acessrios especifi cados

pelo fabricante.

14. Utilize apenas com

o carrinho, estrutura,

trip, suporte, ou mesa

especifi cados pelo

fabricante ou vendidos

com o dispositivo.

Quando utilizar um

carrinho, tenha cuidado ao

mover o conjunto carrinho/dispositivo para evitar danos

provocados pela terpidao.

15. Desligue este dispositivo durante as trovoadas

ou quando no for utilizado durante longos perodos

de tempo.

16. Qualquer tipo de reparao deve ser sempre

efectuado por pessoal qualifi cado. necessria uma

reparao sempre que a unidade tiver sido de alguma

forma danifi cada, como por exemplo: no caso do cabo

de alimentao ou fi cha se encontrarem danifi cados;

na eventualidade de lquido ter sido derramado ou

objectos terem cado para dentro do dispositivo; no caso

da unidade ter estado exposta chuva ou humidade;

se esta no funcionar normalmente, ou se tiver cado.

17. Correcta eliminao deste

produto: este smbolo indica que

o produto no deve ser eliminado

juntamente com os resduos

domsticos, segundo a Directiva

REEE (2012/19/EU) e a legislao

nacional. Este produto dever

ser levado para um centro de recolha licenciado para a

reciclagem de resduos de equipamentos elctricos e

electrnicos (EEE). O tratamento incorrecto deste tipo

de resduos pode ter um eventual impacto negativo

no ambiente e na sade humana devido a substncias

potencialmente perigosas que esto geralmente

associadas aos EEE. Ao mesmo tempo, a sua colaborao

para a eliminao correcta deste produto ir contribuir

para a utilizao efi ciente dos recursos naturais. Para mais

informao acerca dos locais onde poder deixar o seu

equipamento usado para reciclagem, favor contactar

os servios municipais locais, a entidade de gesto de

resduos ou os servios de recolha de resduos domsticos.

18. No instale em lugares confi nados, tais como

estantes ou unidades similares.

19. No coloque fontes de chama, tais como velas

acesas, sobre o aparelho.

20. Favor, obedecer os aspectos ambientais de descarte

de bateria. Baterias devem ser descartadas em um ponto

de coletas de baterias.

21. Use este aparelho em climas tropicais

e/ou moderados.

O MUSIC Group no se responsabiliza por perda alguma

que possa ser sofrida por qualquer pessoa que dependa,

seja de maneira completa ou parcial, de qualquer

descrio, fotografi a, ou declarao aqui contidas.

Dados tcnicos, aparncias e outras informaes

esto sujeitas a modifi caes sem aviso prvio.

Todas as marcas so propriedade de seus respectivos

donos. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE,

TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON,

BEHRINGER, BUGERA e DDA so marcas ou marcas

registradas do MUSIC Group IP Ltd. MUSIC Group

IP Ltd. 2017 Todos direitos reservados.

Para obter os termos de garantia aplicveis e condies e

informaes adicionais a respeito da garantia limitada do

MUSIC Group, favor verifi car detalhes na ntegra atravs

do website music-group.com/warranty.

8 9 Quick Start GuideEUROLIVE B115MP3/B112MP3

(EN) Step 1: Hook-Up

(ES) Paso 1: Conexin

(FR) Etape 1 : Connexions

(DE) Schritt 1: Verkabelung

(PT) Passo 1: Conexes

EUROLIVE B115MP3/B112MP3 Hook-up

XM8500 dynamic mic

USB

X1204USB Stereo pair

Optional BEHRINGER DIGITAL WIRELESS microphones

Optional BEHRINGER DIGITAL WIRELESS microphone receiver

Slaved to secondary pair

10 11 Quick Start GuideEUROLIVE B115MP3/B112MP3

EUROLIVE B115MP3/B112MP3 Controls

(1)

(9)

(8)

(2)(3)

(4)

(5)

(6)

(7)

(17)

(16) (14)

(13)

(10)

(11)

(15)

(12)

(EN) Step 2: Controls (1) The POWER switch turns the speaker on.

(2) Plug the included IEC power cable into

this jack.

(3) Replace a blown fuse here.

(4) MIX OUTPUT sends a copy of the source signal

to another speaker using an XLR cable.

(5) Connect a microphone, balanced mixer

output, or the MIX OUTPUT from another

speaker using a balanced cable with a female

XLR plug. Connect a " mixer output or other

line level signal into the center of the XLR/TRS

combination jack.

(6) INPUT 1 and INPUT 2 knobs adjust the

input sensitivity (gain) for the XLR/TRS

combination jacks.

(7) CLIP LED lights when the input signal begins

to overload.

(8) LOW EQUALIZER cuts or boosts bass

frequencies by +/- 15 dB.

(9) HIGH EQUALIZER cuts or boosts treble

frequencies by +/- 15 dB.

(10) CLIP LED lights when the main output signal

begins to overload.

(11) Connect optional BEHRINGER wireless

microphone receiver here.

(12) LEDs indicate wireless microphone

signal input.

(13) MP3 player controls for playback of fi les from

a USB fl ash drive.

(14) LEVEL knob controls the MP3 player volume.

(15) LCD window display shows the status of the

MP3 being played.

(16) USB jack accepts standard USB fl ash drives.

(17) MODE and DISP(LAY) buttons control the play

mode of the MP3 player and also serve as

contrast controls for the LCD display.

(ES) Paso 2: Controles (1) El interruptor POWER enciende el altavoz.

(2) Conecte el cable IEC incluido en esta entrada.

(3) Acceda desde aqu al fusible en caso de que

tenga que sustituirlo.

(4) La salida MIX OUTPUT enva una copia de

la seal fuente a otro altavoz usando un

cable XLR.

(5) Conecte un micrfono, la salida balanceada

de una mesa de mezclas o la seal de la salida

MIX OUTPUT de otro altavoz a travs de un

cable balanceado con una clavija XLR hembra.

Conecte la salida de 6,3 mm de una mesa de

mezclas u otra seal con nivel de lnea en la

parte central de esta toma combo XLR/TRS.

(6) Los mandos INPUT 1 y INPUT 2 le permiten

ajustar la sensibilidad de entrada (ganancia)

de las tomas combo XLR/TRS.

(7) El piloto CLIP se ilumina cuando la seal de

entrada empieza a sobrecargarse (saturar).

(8) LOW EQUALIZER corta o realza las frecuencias

graves en +/- 15 dB.

(9) HIGH EQUALIZER corta o realza las

frecuencias agudas en +/- 15 dB.

(10) El piloto CLIP se ilumina cuando la seal

de salida principal comience a estar

sobrecargada (saturada).

(11) Conecte aqu un receptor de micrfono

inalmbrico opcional de BEHRINGER.

(12) Los pilotos LED indican la entrada de seal del

micrfono inalmbrico.

(13) El reproductor MP3 controla la reproduccin

de fi cheros de un dispositivo fl ash USB.

(14) El mando LEVEL controla el volumen del

reproductor MP3.

(15) La pantalla LCD le indica el estado del fi chero

MP3 que est siendo reproducido.

(16) Esta clavija USB acepta la insercin de

dispositivos fl ash USB standard.

(17) Los botones MODE y DISP controlan el modo

de reproduccin del reproductor MP3 y

tambin actan como controles del contraste

de la pantalla LCD.

12 13 Quick Start GuideEUROLIVE B115MP3/B112MP3

EUROLIVE B115MP3/B112MP3 Controls

(FR) Etape 2 : Rglages (1) Linterrupteur POWER place l'enceinte

sous tension.

(2) Reliez le cordon secteur cette embase.

(3) Le fusible (remplaable) est situ cet endroit.

(4) La sortie MIX OUTPUT transmet une copie

du signal source une autre enceinte par

liaison XLR.

(5) Reliez un micro, une sortie de console de

mixage symtrique ou la sortie MIX OUTPUT

dune autre enceinte laide dun cordon

XLR symtrique avec fi che XLR femelle.

Si les sorties de votre console (ou de tout

autre quipement niveau ligne) sont en

Jacks 6,35 mm, utilisez le centre de lembase

combine Jack/XLR.

(6) Les boutons INPUT 1 et INPUT 2 dterminent

la sensibilit dentre (gain) des embases

combines Jack 6,35 mm/XLR.

(7) La Led CLIP sallume lorsque le signal dentre

est en surcharge.

(8) Le bouton LOW EQUALIZER attnue ou

accentue les basses frquences de +/- 15 dB.

(9) Le bouton HIGH EQUALIZER attnue ou

accentue les hautes frquences de +/- 15 dB.

(10) La Led CLIP sallume lorsuq ele signal des

sorties gnrales commence crter.

(11) Insrez la cartouche rceptrice des micros sans

fi l optionnels BEHRINGER cette entre.

(12) Les Leds indiquent le signal d'entre du micro

sans fi l.

(13) Rglages du lecteur de MP3 pour la lecture

des fi chiers de la clef USB.

(14) Le bouton LEVEL dtermine le niveau du

lecteur de MP3.

(15) Lcran LCD indique le statut du morceau

MP3 en lecture.

(16) Le port USB accepte les clefs et lecteurs

USB conventionnels.

(17) Les touches MODE et DISP(LAY) contrlent le

mode de lecture du lecteur de MP3 et servent

galement rgler le contraste de lcran LCD.

(DE) Schritt 2: Bedienelemente

(1) Der POWER-Schalter schaltet den

Lautsprecher ein.

(2) Schlieen Sie das mitgelieferte IEC-Netzkabel

an diese Buchse an.

(3) Hier knnen Sie eine durchgebrannte

Sicherung ersetzen.

(4) MIX OUTPUT leitet eine Kopie des

Quellensignals ber ein XLR-Kabel zu einem

anderen Lautsprecher.

(5) Hier schlieen Sie ein Mikrofon,

einen symmetrischen Mischerausgang

oder den MIX OUTPUT eines anderen

Lautsprechers ber ein symmetrisches Kabel

mit XLR-Buchse an. Schlieen Sie einen

Mischerausgang oder ein anderes Line-Pegel-

Signal mit 6,35 mm Stecker in der Mitte der

XLR/TRS-Kombibuchse an.

(6) Die INPUT 1- und INPUT 2-Regler

steuern die Eingangsempfi ndlichkeit (Gain)

der XLR/TRS-Kombibuchsen.

(7) Die CLIP LED leuchtet, sobald das

Eingangssignal zu bersteuern beginnt.

(8) Der LOW EQUALIZER bedmpft oder verstrkt

die Bsse um +/- 15 dB.

(9) Der HIGH EQUALIZER bedmpft oder

verstrkt die Hhen um +/- 15 dB.

(10) Die CLIP LED leuchtet, wenn das

Hauptausgangssignal zu bersteuern beginnt.

(11) Schlieen Sie hier den optionalen BEHRINGER

Drahtlosmikrofon-Empfnger an.

(12) Die LED zeigt die Konnektivitt des

Drahtlosmikrofonsignals an.

(13) MP3 Player-Bedienelemente fr die

Wiedergabe vonDateien des USB-Sticks.

(14) Der LEVEL-Regler steuert die Lautstrke

des MP3 Players.

(15) Das LCD-Fenster zeigt den Status der

abgespielten MP3-Datei an.

(16) Die USB-Buchse akzeptiert Standard

USB-Sticks.

(17) Die MODE- und DISP(LAY)-Tasten steuern den

Play-Modus des MP3-Players und dienen auch

als Kontrastregler fr das LC-Display.

(PT) Passo 2: Controles (1) O boto POWER liga o alto-falante.

(2) Conecte o cabo de alimentao IEC incluso

nesta tomada.

(3) Substitua um fusvel queimado aqui.

(4) A sada MIX OUTPUT envia uma cpia do sinal

fonte a outro alto-falante, usando o XLR.

(5) Conecte um microfone, sada de mixer

balanceado, ou sada MIX OUTPUT

proveniente de outro alto-falante usando

um cabo balanceado com plugue fmea XLR.

Conecte uma sada de mixer de " ou outro

sinal de nvel de linha ao centro do conjunto

de tomadas XLR/TRS.

(6) Os botes de entrada INPUT 1 e INPUT 2

ajustam a sensibilidade de entrada (ganho)

do conjunto de tomadas XLR/TRS.

(7) O LED CLIP ilumina-se quando o sinal de

entrada comea a fi car sobrecarregado.

(8) O equalizador LOW EQUALIZER corta ou

aumenta as frequncias graves em +/- 15 dB.

(9) O equalizador HIGH EQUALIZER corta ou

aumenta as frequncias agudas em +/- 15 dB.

(10) O LED CLIP ilumina-se quando o sinal de sada

principal comea a fi car sobrecarregado.

(11) Conecte um receptor de microfone sem fi o

BEHRINGER opcional aqui.

(12) Os LEDs indicam entrada de sinal de

microfone sem fi o.

(13) Controles de MP3 player para playback ou

arquivos provenientes de um pen drive USB.

(14) O boto LEVEL controla o volume do

MP3 player.

(15) A janela LCD exibe o status do MP3 que est

sendo tocado.

(16) A tomada USB aceita pen drives USB padro.

(17) Os botes MODE e DISP(LAY) controlam

o modo de reproduo do MP3 player e

tambm servem de controles de contrastes

do mostrador LCD.

14 15 Quick Start GuideEUROLIVE B115MP3/B112MP3

EUROLIVE B115MP3/B112MP3 Getting started

(EN) Step 3: Getting started

Place the speaker(s) in desired locations,

either on stands or as wedge monitors

on the fl oor.

Make all necessary connections.

DO NOT turn on the power yet.

Turn on your audio source

(mixer, microphone).

Turn on your speaker(s) by pressing the

POWER SWITCH. The POWER LED will

light up.

Play your audio source or speak into your

microphone at a normal to loud level.

Adjust the LEVEL knob to the desired

volume. If the CLIP LED fl ashes,

turn the LEVEL knob down. If using

multiple speakers, the LEVEL knob must be

adjusted on each speaker.

If necessary, adjust the HIGH and

LOW EQUALIZER knobs on each speaker

to boost or cut treble and bass

frequencies to taste.

Attach a USB fl ash drive to the USB port.

Switch between folders on the drive

using the FOLDER buttons. Select the

track you wish to play using the TRACK buttons.

Press the PLAY/PAUSE button to start or

stop playback.

Press the REPEAT button and then the

MODE button to select between

repeating: ALL mp3 fi les on the

USB drive, fi les in the current FOLDER, the currently

playing fi le (SINGLE) or to play all fi les in

RANDOM order.

Press the DISP(LAY) button to change

what appears on the screen of the

MP3 player between the TAG

(artist and song name information),

TRACK (fi le name up to 64 characters) or TIME

(shows track number in current folder and the

elapsed time of the currently running track).

Press the DISP(LAY) and MODE buttons

at the same time to cycle between

screen contrast intensities.

Adjust the playback volume using

the LEVEL knob.

Optional wireless microphone set-up

Only insert the optional BEHRINGER

DIGITAL WIRELESS microphone

receiver into the input.

Turn the ON/OFF switches on the

microphones to the ON position.

During the pairing process, the LED on

the dongle will fl ash. Once the

connection between the wireless

microphone and the receiver is achieved, the LED

will remain on (solid).

Speak into the wireless microphones

and adjust the volume using the volume

buttons on the individual microphones.

Press the volume down button for two seconds to

mute the microphone signal. Press the volume up

button to unmute the microphone.

(ES) Paso 3: Puesta en marcha

Coloque los altavoces en las posiciones

que quiera, sobre un soporte o sobre el

suelo como monitores de tipo cua.

Realice todas las conexiones necesarias.

NO ENCIENDA todava las unidades.

Encienda su fuente de seal audio

(mesa de mezclas, micrfono).

Encienda los altavoces pulsando su

interruptor POWER. El piloto POWER se

iluminar en cuanto haga esto.

Toque o active la reproduccin en su

fuente audio o hable o cante en el

micrfono a un nivel entre normal y alto.

Ajuste el mando LEVEL hasta conseguir el

volumen que quiera. Si parpadea el piloto

CLIP, reduzca el ajuste del mando LEVEL.

Si usa varios altavoces, deber ajustar el mando

LEVEL en cada uno de ellos.

Si es necesario, ajuste los mandos

EQUALIZER HIGH y LOW de cada altavoz

para realzar o cortar las frecuencias

agudas y graves de acuerdo a sus gustos.

Conecte un dispositivo fl ash USB en el

puerto USB. Cambie entre la distintas

carpetas de dicho dispositivo usando

los botones FOLDER. Elija la pista que quiera

reproducir usando los botones TRACK. Pulse el

botn PLAY/PAUSE para poner en marcha la

reproduccin o detenerla.

Pulse el botn REPEAT y despus el botn

MODE para elegir entre estos modos de

repeticin: Todos los fi cheros mp3 de la

unidad USB (ALL), los fi cheros de la carpeta activa

(FOLDER), el fi chero activo (SINGLE) o hacer

que se reproduzcan todos los fi cheros en orden

aleatorio (RANDOM).

Pulse el botn DISP para cambiar lo que

aparece en la pantalla del reproductor

MP3 entre TAG (informacin del nombre

de la cancin y el msico), TRACK (nombre del fi chero

de hasta 64 caracteres) o TIME (donde aparecer el

nmero de pista de la carpeta activa y el tiempo

transcurrido de la pista en reproduccin).

Pulse simultneamente los botones

DISP y MODE para cambiar entre las

distintas opciones de contraste

posibles para la pantalla.

Ajuste el volumen de reproduccin con el

mando LEVEL.

Confi guracin de micro inalmbrico opcional

Solo inserte el receptor de microfono

digital opcional inalambrico, BEHRINGER

DIGITAL WIRELESS, en la entrada.

Coloque los interruptores ON/OFF de los

micrfonos a la posicin ON.

Durante el proceso de sincronizacin,

el piloto de la mochila parpadear.

Una vez que se haya establecido la

conexin entre el micro inalmbrico y el receptor,

el piloto quedar iluminado fi jo.

Cante o hable en los micros inalmbricos

y ajuste el volumen usando los botones

de volumen de cada uno de los

micrfonos. Pulse durante dos segundos el botn de

volumen abajo para anular la seal del micro.

Pulse el botn de volumen arriba para anular dicha

anulacin y volver a activar la seal del micro.

16 17 Quick Start GuideEUROLIVE B115MP3/B112MP3

(FR) Etape 3 : Mise en oeuvre

Placez les enceintes o vous le souhaitez,

sur pied ou au sol en bains de pieds.

Ralisez les connexions. NE PLACEZ PAS

sous tension attendez.

Activez la source audio (console de

mixage, micro, etc.).

Placez les enceintes sous tension laide

de lINTERRUPTEUR POWER. La Led

POWER sallume.

Activez la source audio ou parlez dans

le micro avec un niveau allant de

normal  fort.

Rglez le bouton LEVEL pour obtenir le

niveau souhait. Si la Led CLIP sallume,

baissez le rglage LEVEL. Si vous utilisez

plusieurs enceintes, le bouton LEVEL doit tre rgl

sur chaque enceinte.

Si ncessaire, rglez les boutons

dgalisation HIGH et LOW de chaque

enceinte pour attnuer ou accentuer les

basses et hautes frquences en fonction de la

rponse souhaite.

Reliez une clef USB au port USB.

Slectionnez les dossiers de la clef laide

des touches FOLDER. Slectionnez la

piste lire avec les touches TRACK. Appuyez sur la

touche PLAY/PAUSE pour lancer ou arrter la lecture.

Appuyez sur la touche REPEAT puis sur

la touche MODE pour slectionner

(en squence) : Tous (ALL) les fi chiers

mp3 de la clef USB, les fi chiers du dossier

courant (FOLDER), le fi chier courant (SINGLE)

vous pouvez galement lire tous les fi chiers de

faon alatoire (RANDOM).

Appuyez sur la touche DISP(LAY)

pour modifi er laffi chage lcran du

lecteur de MP3 : TAG (nom de Lartiste et

du morceau), TRACK (nom du fi chier avec un

maximum de 64 caractres) ou TIME (numro du

morceau dans le dossier courant, et le temps coul

du morceau en cours de lecture).

Appuyez sur les touches DISP(LAY) et

MODE en mme temps pour modifi er le

contraste de lcran.

Rglez le volume de la lecture laide du

bouton LEVEL.

Mise en uvre du micro sans fi l optionnel

Seul le rcepteur optionnel du micro

SANS FIL NUMERIQUE BEHRINGER doit

tre insr dans l'entre.

Placez les slecteurs ON/OFF des micros

sur ON.

Lors de la priode de synchronisation,

la Led de la cartouche rceptrice clignote.

Une fois les micros metteurs

synchroniss avec leurs rcepteurs, la Led

reste allume.

Parlez dans les micros sans fi l et rglez le

volume laide des boutons sur les

micros. Enfoncez le bouton de volume

pendant deux secondes pour couper le signal du

micro. Appuyez nouveau sur le bouton de volume

pour ractiver le signal.

(DE) Schritt 3: Erste Schritte

Platzieren Sie die Lautsprecher an der

vorgesehenen Stelle, entweder auf

Stndern oder als Bodenmonitore.

Stellen Sie alle notwendigen

Anschlsse her. Schalten Sie das

Gert NOCH NICHT ein.

Schalten Sie Ihre Audioquelle

(Mischer, Mikrofon) ein.

Schalten Sie Ihre Lautsprecher mit einem

Druck auf den POWER-SCHALTER ein.

Die POWER LED leuchtet.

Spielen Sie Ihre Audioquelle ab oder

sprechen Sie mit normaler bis hoher

Lautstrke in Ihr Mikrofon.

Drehen Sie den LEVEL-Regler auf die

gewnschte Lautstrke auf. Wenn die

CLIP LED blinkt, drehen Sie den

LEVEL-Regler zurck. Beim Einsatz mehrerer

Lautsprecher mssen Sie den LEVEL-Regler an jeder

Box zurckdrehen.

Stellen Sie ntigenfalls die HIGH- und

LOW EQUALIZER-Regler jedes

Lautsprechers ein, um die Hhen und

Bsse wunschgem zu verstrken/bedmpfen.

Schlieen Sie einen USB-Stick an den

USB-Port an. Schalten Sie mit den

FOLDER-Tasten zwischen den Ordnern

des USB-Sticks um. Whlen Sie den abzuspielenden

Track mit den TRACK-Tasten. Drcken Sie die

PLAY/PAUSE-Taste, um die Wiedergabe zu

starten/stoppen.

Drcken Sie die REPEAT-Taste und dann

die MODE-Taste, um zwischen folgenden

Wiederholungsoptionen zu whlen:

ALLE mp3-Dateien auf dem USB-Laufwerk,

Dateien im aktuellen FOLDER (ORDNER), die aktuell

abgespielte Datei (SINGLE) oder alle Dateien in

ZUFLLIGER (RANDOM) Reihenfolge.

Drcken Sie die DISP(LAY)-Taste, um die

Bildschirmanzeige des MP3 Players

zwischen folgenden Optionen zu

wechseln: TAG (Informationen zum Knstler und

Songnamen), TRACK (Dateiname mit maximal

64 Zeichen) oder TIME (zeigt die Track-Nummer im

aktuellen Ordner und die abgelaufene Zeit des

aktuell abgespielten Tracks an).

Drcken Sie gleichzeitig die DISP(LAY)-

und MODE-Tasten, um verschiedene

Kontraststrken des Bildschirms

zyklisch durchzugehen.

Stellen Sie mit dem LEVEL-Regler die

Wiedergabelautstrke ein.

Einrichten eines optionalen Drahtlosmikrofons

Stecken Sie den BEHRINGER DIGITAL

WIRELESS Empfnger in den Eingang.

Stellen Sie die ON/OFF-Schalter der

Mikrofone auf ON.

Whrend die doppelte Verbindung

hergestellt wird, blinkt die LED des

Dongles. Sobald die Verbindung

zwischen Drahtlosmikrofonen und Empfnger steht,

leuchtet die LED dauerhaft (konstant).

Sprechen Sie ins Drahtlosmikrofon

und stellen Sie die Lautstrke mit

den Volume-Tasten der einzelnen

Mikrofone ein. Halten Sie die Volume-Down-

Taste zwei Sekunden gedrckt, um das

Mikrofonsignal stummzuschalten.

EUROLIVE B115MP3/B112MP3 Getting started

18 19 Quick Start GuideEUROLIVE B115MP3/B112MP3

(PT) Passo 3: Primeiros Passos

Posicione o(s) alto-falante(s) nos locais

desejados, em estantes, ou como

monitores de palco no cho.

Faa todas as conexes necessrias.

NO ligue-os ainda.

Ligue sua fonte de udio

(mixer, microfone).

Ligue o(s) alto-falante(s) pressionando o

BOTO POWER. O boto POWER LED

se acender.

Toque a fonte de udio ou fale no

microfone em um nvel de som normal.

Ajuste o boto de nvel LEVEL ao volume

desejado. Se o LED CLIP piscar, abaixe o

nvel do boto LEVEL. Se estiver

utilizando vrios alto-falantes, o boto de nvel

LEVEL deve ser ajustado em cada alto-falante.

Se for necessrio, ajuste os botes

equalizadores HIGH (alto) e LOW (baixo)

em cada alto-falante para aumentar ou

cortar frequncias agudas e graves de acordo com

seu gosto pessoal.

Conecte um pen drive USB porta USB.

Passe de uma pasta para a outra no drive

usando os botes FOLDER. Selecione a

faixa que deseja tocar usando os botes TRACK.

Pressione o boto PLAY/PAUSE para iniciar ou

parar o playback.

Pressione o boto de repetio REPEAT e

aps isso o boto MODE para selecionar

entre repetio de: TODOS os arquivos

mp3 no drive USB, arquivos na pasta atual FOLDER,

arquivos que estejam tocando no momento

(SINGLE) ou para tocar todos os arquivos em ordem

aleatria RANDOM.

Pressione o boto DISP(LAY) para mudar

a informao que aparece na tela do

MP3 player, de TAG (dados sobre o

artista e nome da msica), TRACK (faixa: nome do

arquivo com o mximo de 64 caracteres) ou TIME

(tempo: mostra o nmero da faixa na pasta

atual e o tempo decorrido da faixa que est sendo

tocada no momento).

Pressione os botes DISP(LAY) e MODE

simultaneamente para mudar as

intensidades de contraste de tela.

Ajuste o volume de playback usando o

boto de nvel LEVEL.

Confi gurao opcional de microfone sem fi o

Insira apenas o receptor opcional de

microfone SEM FIO DIGITAL BEHRINGER

na entrada.

Coloque os botes ON/OFF dos

microfones na posio ligada ON.

Durante o processo de emparelhamento,

o LED no dongle piscar. Quando a

conexo entre o microfone sem fi o

e o receptor for realizada, o LED permanecer

ligado (slido).

Fale nos microfones sem fi o e ajuste o

volume usando os botes de volume

encontrados em cada microfone.

Pressione o boto de abaixar o volume durante dois

segundos para colocar o sinal de microfone em modo

mute. Pressione o boto de aumentar o volume para

retirar o microfone do modo mute.

EUROLIVE B115MP3/B112MP3 Getting started

Quick Start Guide 21

Other important information

1. Register online. Please register your new

MUSIC Group equipment right after you purchase it by

visiting behringer.com. Registering your purchase using

our simple online form helps us to process your repair

claims more quickly and effi ciently. Also, read the terms

and conditions of our warranty, if applicable.

2. Malfunction. Should your MUSIC Group

Authorized Reseller not be located in your vicinity,

you may contact the MUSIC Group Authorized Fulfi ller

for your country listed under Support at behringer.com.

Should your country not be listed, please check if your

problem can be dealt with by our Online Support which

may also be found under Support at behringer.com.

Alternatively, please submit an online warranty claim at

behringer.com BEFORE returning the product.

3. Power Connections. Before plugging the

unit into a power socket, please make sure you are using

the correct mains voltage for your particular model.

Faulty fuses must be replaced with fuses of the same type

and rating without exception.

1. Registro online. Le recomendamos que

registre su nuevo aparato MUSIC Group justo despus de

su compra accediendo a la pgina web behringer.com.

El registro de su compra a travs de nuestro sencillo

sistema online nos ayudar a resolver cualquier

incidencia que se presente a la mayor brevedad posible.

Adems, aproveche para leer los trminos y condiciones de

nuestra garanta, si es aplicable en su caso.

2. Averas. En el caso de que no exista un distribuidor

MUSIC Group en las inmediaciones, puede ponerse en

contacto con el distribuidor MUSIC Group de su pas,

que encontrar dentro del apartado Support de nuestra

pgina web behringer.com. En caso de que su pas no

aparezca en ese listado, acceda a la seccin Online Support

(que tambin encontrar dentro del apartado Support

de nuestra pgina web) y compruebe si su problema aparece

descrito y solucionado all. De forma alternativa, envenos a

travs de la pgina web una solicitud online de soporte en

periodo de garanta ANTES de devolvernos el aparato.

3. Conexiones de corriente. Antes de enchufar

este aparato a una salida de corriente, asegrese de que dicha

salida sea del voltaje adecuado para su modelo concreto.

En caso de que deba sustituir un fusible quemado, deber

hacerlo por otro de idnticas especifi caciones, sin excepcin.

1. Enregistrez-vous en ligne. Prenez le

temps denregistrer votre produit MUSIC Group aussi vite

que possible sur le site Internet behringer.com. Le fait

denregistrer le produit en ligne nous permet de grer

les rparations plus rapidement et plus effi cacement.

Prenez galement le temps de lire les termes et conditions

de notre garantie.

2. Dysfonctionnement. Si vous navez pas de

revendeur MUSIC Group prs de chez vous, contactez le

distributeur MUSIC Group de votre pays : consultez la liste

des distributeurs de votre pays dans la page Support de

notre site Internet behringer.com. Si votre pays nest pas

dans la liste, essayez de rsoudre votre problme avec

notre aide en ligne que vous trouverez galement dans

la section Support du site behringer.com. Vous pouvez

galement nous faire parvenir directement votre demande

de rparation sous garantie par Internet sur le site

behringer.com AVANT de nous renvoyer le produit.

3. Raccordement au secteur. Avant de relier

cet quipement au secteur, assurez-vous que la tension

secteur de votre rgion soit compatible avec lappareil.

Veillez remplacer les fusibles uniquement par des

modles exactement de mme taille et de mme valeur

lectrique sans aucune exception.

1. Online registrieren. Bitte registrieren Sie Ihr

neues MUSIC Group-Gert direkt nach dem Kauf auf der

Website behringer.com. Wenn Sie Ihren Kauf mit unserem

einfachen online Formular registrieren, knnen wir Ihre

Reparaturansprche schneller und effi zienter bearbeiten.

Lesen Sie bitte auch unsere Garantiebedingungen,

falls zutreff end.

2. Funktionsfehler. Sollte sich kein MUSIC Group

Hndler in Ihrer Nhe befi nden, knnen Sie den

MUSIC Group Vertrieb Ihres Landes kontaktieren,

der auf behringer. com unter Support aufgefhrt

ist. Sollte Ihr Land nicht aufgelistet sein, prfen Sie

bitte, ob Ihr Problem von unserem Online Support

gelst werden kann, den Sie ebenfalls auf behringer.com

unter Support fi nden. Alternativ reichen Sie bitte Ihren

Garantieanspruch online auf behringer.com ein, BEVOR Sie

das Produkt zurcksenden.

3. Stromanschluss. Bevor Sie das Gert an

eine Netzsteckdose anschlieen, prfen Sie bitte, ob Sie

die korrekte Netzspannung fr Ihr spezielles Modell

verwenden. Fehlerhafte Sicherungen mssen ausnahmslos

durch Sicherungen des gleichen Typs und Nennwerts

ersetzt werden.

1. Registre-se online. Por favor, registre seu

novo equipamento MUSIC Group logo aps a compra

visitando o site behringer.com Registrar sua compra

usando nosso simples formulrio online nos ajuda a

processar seus pedidos de reparos com maior rapidez e

efi cincia. Alm disso, leia nossos termos e condies de

garantia, caso seja necessrio.

2. Funcionamento Defeituoso. Caso seu

fornecedor MUSIC Group no esteja localizado nas

proximidades, voc pode contatar um distribuidor

MUSIC Group para o seu pas listado abaixo de Suporte

em behringer.com. Se seu pas no estiver na lista,

favor checar se seu problema pode ser resolvido com o

nosso Suporte Online que tambm pode ser achado

abaixo de Suporteem behringer.com. Alternativamente,

favor enviar uma solicitao de garantia online em

behringer.com ANTES da devoluo do produto.

3. Ligaes. Antes de ligar a unidade tomada,

assegure-se de que est a utilizar a voltagem correcta para

o modelo em questo. Os fusveis com defeito tero de

ser substitudos, sem qualquer excepo, por fusveis do

mesmo tipo e corrente nominal.

Important information

Aspectos importantes

Informations importantes

Weitere wichtige Informationen

Outras Informaes Importantes

20 EUROLIVE B115MP3/B112MP3

Specifi cations

B115MP3 B112MP3 Amplifi er

Low-frequency range

Max output power 700 W*

High-frequency range

Max output power 300 W*

Audio Inputs

XLR (servo-balanced)

Sensitivity -36 dBu to 0 dBu

Input impedance 14 k

" TRS jack (servo-balanced)

Sensitivity -36 dBu to 0 dBu

Input impedance 14 k

USB port/MP3 player

Connector USB Type A

File system FAT 16, FAT 32

Format MP3 (CBR & VBR)

Bit rates 32 - 320 kbps

Sample rates 32 kHz, 44.1 kHz, 48 kHz

Wireless system

Connector USB 3.0

Frequency band 2.4 GHz

Frequency response (Wireless Link) 20 Hz - 20 kHz (+0/-2.5 dB)

Range Max. 80 m (line of sight)

Audio Outputs

Mix

Connector XLR, balanced

Level Control

Input trim - to +36 dB

Max. input level 18 dBu

Loudspeaker System Data

Frequency response 45 Hz to 20 kHz 50 Hz to 20 kHz

Crossover frequency 2.2 kHz 2.8 kHz

Limiter Optical

Equalizer

High +/-15 dB @ 12 kHz

Low +/-15 dB @ 80 Hz

Power Supply

Voltage (Fuses)

USA / Canada 120 V, 60 Hz (T 6.3 A H 250 V)

UK / Australia 240 V~, 50 Hz (T 3.15 A H 250 V)

Europe 230 V~, 50 Hz (T 3.15 A H 250 V)

Japan 100 V~, 50-60 Hz (T 6.3 A H 250 V)

Power consumption max. 110 W

Mains connection Standard IEC receptacle

Dimensions/Weight

Dimensions (H x W x D) 713 x 427 x 313 mm (28.1 x 16.8 x 12.3")

568 x 342 x 270 mm (22.4 x 13.4 x 10.6")

Weight 17.7 kg (38.9 lbs) 12.5 kg (27.6 lbs)

*Independent of limiters and driver protection circuits

Quick Start Guide 2322 EUROLIVE B115MP3/B112MP3

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Responsible Party Name: MUSIC Group Services NV Inc.

Address: 5270 Procyon Street Las Vegas, NV 89118 USA

Phone Number: +1 702 800 8290

EUROLIVE B115MP3/B112MP3

complies with the FCC rules as mentioned in the following paragraph:

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit diff erent from that to which the

receiver is connected

Consult the dealer or an experienced radio/TV technician for help

This device complies with Part 15 of the FCC rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

Important information:

Changes or modifi cations to the equipment not expressly approved by MUSIC Group

can void the users authority to use the equipment.

EUROLIVE B115MP3/B112MP3

Dedicate Your Life to M

Manualsnet FAQs

If you want to find out how the B115MP3 Behringer works, you can view and download the Behringer B115MP3 Quick Start Guide on the Manualsnet website.

Yes, we have the Quick Start Guide for Behringer B115MP3 as well as other Behringer manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a Behringer B115MP3. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Behringer B115MP3 Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Behringer B115MP3 Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Behringer B115MP3 Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Behringer B115MP3 Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Behringer B115MP3 Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.