AFTER SALES SUPPORT MODEL: WIRELESS CHARGING PAD ITEM #: 13177/AT11591-800-757-1440 info@atomiusa.com
CAUTION: Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, re or explosion.
Keep Children Away TO REDUCE THE RISK OF ELECTRIC SHOCK, USE ONLY INDOORS. DO NOT PLUG INTO POWER SOURCES OTHER THAN WALL MOUNTED OUTLETS (IE. POWER TAPS, EXTENSION CORDS, ETC.) Use only in dry areas
Product: WIRELESS CHARGING PAD Item #: 13177/AT1159 Wireless Charger Specications: Input: 5V 2A, 5V 1.67A Wall Charger Specications: Input: 125V AC 60Hz 0.5A max Output: 5V 2A, 9V 1.67A
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS 1. Caution: Risk of electric shock. Grounding continuity must be maintained. 2. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper conguration for the power outlet, if needed. 3. To reduce the risk of electric shock, use only indoors. Do not plug into power sources other than wall mounted outlets (ie. Power taps, extension cords, etc.) 4. The plug is used to power the device. The outlet should be installed near the equipment and should be easily accessible. 5. The cover may under no circumstances be opened. If the cover is damaged, then the power supply may no longer be used. 6. Children should be supervised to ensure that they do not play with the appliance.
This device complies with part 18 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Normal environmental conditions: a) Altitude up to 2 000m; b) Temperature 5 C to 25 C; c) Storage environment: Temperature 5 C to 25 C. Humidity 5-95% RH
Qi WIRELESS CHARGING PAD
On-sale period: 12/2019
NOTE: If you use any wall charger other than Quallcom Quick Charge 3.0, charging power will be lower than 10W.
ATTENTION You can use any compatible micro USB cable and 2 amp wall charger to power your Qi Wireless Charge Pad. Maximum output for the pad is 2 amps, and using a 1 amp charger will result in a longer charging time.
CHARGING YOUR WIRELESS DEVICE
PLUG your Qi Wireless Charge Pad into a USB charger.
PLACE the devices on the center of your wireless charging pad. Make sure the device is aligned over the center of the charging base. Charging will begin on contact.
INDICATOR LIGHTS AND WHAT THEY MEAN
<