Barska AX12616 Safe User Manual PDF

1 of 2
1 of 2

Summary of Content for Barska AX12616 Safe User Manual PDF

Users Manual For Keypad Safe

WARNING

- New safe is in factory default mode. Factory Pin Code is 159

- Follow manual to set and test your personal pin code.

- Replace the cap on the Initialization Button after Pin Code Registration

- Avoid leaving safe door open and unattended; it will allow unauthorized individuals to reprogram the safe, gaining full access to the safe and its contents.

- Test Emergency Keys and store them in a secure place, NOT inside of the safe.

- To maximize security and performance of the safe, test pin code every 6 months.

Read all instructions before using this safe.

See reverse side for more information

PARTS OF THE SAFE

Actual model may vary Inside of Safe Door

OPEN SAFE WITH EMERGENCY KEY

1. Remove round cap, and insert Emergency Key.

2. Turn Emergency Key counter clockwise and turn the Door Knob clockwise to open the safe.

INSTALL BATTERIES

1. Remove battery compartment cover.

2. Insert 4 AA batteries and restore battery cover.

Note: Do not mix old and new batteries

PIN CODE REGISTRATION

Safe retains 1 pin code Factory default pin code is: 159

2. Enter desired 3-8 digit Pin Code and press # key. Indicator light under proceed should disappear. Replace cap on the initialization button.

TEST REGISTERED PIN CODE

1. With safe door open, extend the bolts by turning the door knob counterclockwise.

2. Enter Registered Pin Code and press key. Turn door knob clockwise.

Successful Registration If you were able to turn the door knob with your registered pin code then registration was successful.

Unsuccessful Registration If you were NOT able to turn the door knob with your registered pin code then registration was unsuccessful. Please follow Pin Code Registration again to register your desired pin code.

OPEN / CLOSE DOOR

Open Enter registered Pin Code and press button. Turn handle clockwise and open the door.

Close Door: Close the door and turn handle counterclockwise. Note: If 3 wrong Pin Codes are entered safe will activate alarm for 20 seconds and safe will be inoperable. Another 3 continuous wrong entries and alarm will activate for 5 min and safe will be inoperable.

SOUND OPTION

Sound On Press 66#

Sound Off Press 633#

Note: Door alarm will Not sound in Silent Mode.

LOW BATTERY WARNING

When safe is low on battery, low battery indicator light will light up. Follow steps under Install Batteries to install batteries.

CARE AND MAINTENANCE

- Keep liquids away from the control panel. Spills on the control panel will cause damage and possibly electric shock.

- Secure safe in a proper area to prevent from falling and causing damage or injury.

- DO NOT disassemble the product. For all repairs, contact BARSKA Customer Service.

- DO NOT use chemicals or cleaning agents to clean the safe.

C

D

BA

1. Initialization Button is located inside of battery compartment. Please pull out the battery compartment cover until you see the button. Then press and release the initialization button. Indicator

Manualsnet FAQs

If you want to find out how the AX12616 Barska works, you can view and download the Barska AX12616 Safe User Manual on the Manualsnet website.

Yes, we have the User Manual for Barska AX12616 as well as other Barska manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Barska AX12616. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Barska AX12616 Safe User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Barska AX12616 Safe User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Barska AX12616 Safe User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Barska AX12616 Safe User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Barska AX12616 Safe User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.