OPENING THE SAFE WITH ACCESS KEY
For Large Keypad Depository Safe
1. To expose the key access, remove logo plate screws with provided Allen wrench
2. Insert access key into key access, and turn clockwise to open
For Standard & Compact Keypad Depository Safe
1. To expose the key access, gently lift off the key cover
2. Insert access key into key access, and turn clockwise to open
NOTE: Store keys in a secure place. NOT inside of the safe
BATTERIES
1. Remove battery cover on the inside of the safe door
2. Insert 4 new AA batteries into the battery compartment and pay attention to the polarity of the batteries
3. Replace compartment cover
CREATING PERSONAL PIN CODES
Safe retains only two 3-8 digit pin codes
1st Personal Pin Code
1. With safe open, press and release the initialization button located on the inside of the safe door. Yellow indicator light will be on.
2. On the key pad input your 3-8 digit pin code and press and release either "A" or "B" to confirm. Yellow indicator light will turn off.
2nd Personal Pin Code
1. On the key pad press and release 0 twice. Press and release the initialization button located on the inside of the safe door. Yellow indicator light will be on.
2. On the key pad input your 3-8 digit pin code and press and release either "A" or "B" to confirm. Yellow indicator light will turn off.
TESTING PERSONAL PIN CODES
1. With safe door open, and the handle/lock knob in the lock position. Enter in 1st personal pin code on the key pad and press and release either "A" or "B" to confirm.
Successful Save - You will hear 2 short beeps - The green indicator light will flash - Move handle to the right to retract bolts
Unsuccessful Save - You will hear 9 short beeps - Handle will not move and bolts will stay extended - Repeat steps CREATING PERSONAL PIN CODES
2. To test 2nd personal pin code, enter in 2nd personal pin code on the key pad and press and release either "A" or "B" to confirm. See Successful Save and Unsuccessful Save above
3. Test a pin code that is not registered to make sure the safe does not open to complete testing process
OPENING & CLOSING SAFE WITH PERSONAL PIN CODES
OPEN: 1. On the key pad enter in either of your 3-8 digit pin codes and press and release either "A" or "B" to confirm.
2. Turn the handle/lock knob to the unlock position and pull the safe door open
NOTE After entering pin, you have 5 seconds to turn the knob before the mechanism re-locks automatically
CLOSE: To close safe, close door and turn knob to the lock position
LOCK OUT
Lock out mode is activated when the wrong personal pin code is entered
- 3 consecutive times, Lock out mode will last 20 seconds - 6 consecutive times, Lock out mode will last 5 minutes
CHANGING PERSONAL PIN CODES
Follow steps in CREATING PERSONAL PIN CODES
Parts of the Control Panel C. Indicator Lights D. Key Pad
A. Handle B. Logo Plate and Key Access
Parts of the Control Panel C. Indicator Lights D. Key Pad
A. Lock Knob B. Key Cover and Key Access
Parts of the Inside of the Safe Door
E. Initialization Button F. Battery Compartment
A
F
B
C D
C
B
D
E
WARNING: Avoid leaving door open and unattended; it will allow unauthorized individuals to reprogram the safe, gaining full access to the safe and contents.
User Manual For Depository Safe
1 2 3 A
4 5 6 0
7 8 9 B
A
Large Keypad Depository Safe
Standard & Compact Keypad Depository Safe
1 2 3 A
4 5 6 0
7 8 9 B
* Actual models may vary
Lock Position
Unlock Position
Lock Position
Unlock Position
See reverse side for more information 12/20
BC657