See reverse side for more information 12/15
BC282
Users Manual for Biometric Safe
GETTING STARTED
1. Remove Emergency Keys from accessory package 2. To expose the Emergency Key access, remove Logo Plate (G) screws with provided tool 3. Insert Emergency Key into key access, push and turn counter-clockwise 4. Turn Handle (H) clockwise to open the safe 5. Continue with INSTALL BATTERIES
INSTALL BATTERIES 1. Remove Battery Compartment (B) cover 2. Insert 4 AA batteries and restore battery cover 3. Continue with FINGERPRINT REGISTRATION
FINGERPRINT REGISTRATION
IMPORTANT: The safe is in either Pre-registered mode or Factory Default mode, test safe to determine factory settings below
Pre-registered mode: Safe can NOT be opened with any fingerprint(s) Factory Default mode: Safe can be opened with ANY fingerprint(s)
1. With the safe door open, press and release Initialization Button (A) 2. Immediately place a finger on the Fingerprint Scanner (D) - Hold finger still - 1 beep will be heard recognizing the fingerprint; followed by 2 consecutive beeps - Remove finger - Registration is complete Successful Registration Registration is successful when a total of 3 beeps are heard Unsuccessful Registration 2 short beeps will be heard; repeat registration process again 3. To register another fingerprint - repeat steps 1 2
4. Continue with TEST (NON) REGISTERED FINGERPRINTS
TEST (NON) REGISTERED FINGERPRINTS 1. Test multiple Non-Registered fingerprints - Close safe door, turn Handle (H) counter-clockwise to lock the safe - Press and release Wake-Up Button (F) - Place a non-registered finger on the Fingerprint Scanner (D) - Turn Handle (H) clockwise, the door should not open - If the door opens with a non-registered fingerprint, registration was unsuccessful; the safe is still in Factory Default mode - Repeat steps under FINGERPRINT REGISTRATION, and test multiple non-registered fingerprints
2. Test a Registered fingerprint - With door closed, press and release Wake-Up Button (F) - Place a registered finger on the Fingerprint Scanner (D) - Turn Handle (H) clockwise, the door should open - Registration was successful, if it only opened with registered fingerprint(s) CLOSE/OPEN SAFE DOOR
CLOSE: Close safe door, turn Handle (H) counter-clockwise to lock the safe OPEN: Press and release Wake-Up Button (F) - Place a registered finger on Fingerprint Scanner (D) - Turn Handle (H) clockwise to open the safe
WARNING
- New Safe is in either Pre-registered mode or Factory Default mode; ANY fingerprint can open the safe. Only a successfully registered Fingerprint(s) can terminate Factory Default mode.
- Register at least two different fingerprints and test a few times before closing the safe door.
- Test with a non-registered fingerprint. If the safe opens, the safe is still in Factory Default mode.
- Avoid leaving safe door open and unattended; it will allow unauthorized individuals to add their fingerprints and/or reprogram the safe, gaining full access to the safe and the contents.
- Test the Emergency Keys and store them in a secure place, NOT inside of the safe.
- To maximize the security and performance of the safe, test registered fingerprints every 6 months.
- Initialization button cover must be restored after every use.
- If user resets the safe to Factory Default mode: ANY fingerprint can open the safe.
- Test and make sure the safe works properly before mounting.
- Mount the safe before use because the safe has a small base with a heavy door, and will tip forward if not properly mounted.
- Keep children away from safe; they should not play with or around the safe at anytime. Children at play could accidentally get locked inside the safe or accidentally pull on the safe door causing safe to tip over if not properly mounted.
- Failure to follow these warnings could result in serious injury or death.
Read all instructions before using this safe.
* Actual model may vary A. Initialization Button B. Battery Compartment C. Bolts D. Fingerprint Scanner E. Indicator Lights F. Wake-Up Button
G. Logo Plate and Emergency Key Access H. Handle I. External Battery Pack (batteries not included)
J. External Battery Access
A
B
C
F D
E
G
H
HJ
I Lock
Unlock