Contents

Bang Olufsen Beolab 2000 User's Guide PDF

1 of 12
1 of 12

Summary of Content for Bang Olufsen Beolab 2000 User's Guide PDF

B E O L A B 2 0 0 0 1

The BeoLab 2000 gives your main

Bang & Olufsen system an extra

dimension.

Now you can play any audio or video

source you like in your main system

and listen to it via your BeoLink

installation in the room with your

BeoLab 2000.

But this is not all. You can even

control the daily playback functions

in your main system via the BeoLab

2000.

This guide explains how...

Users guide

2

C O N T E N T S 3

4 Nice to know about...

Music in other rooms

6 Close-up operation

Sound control

7 Volume adjustment

Timer Play control

8 Remote operation

Using the Beo4 remote control

9 Controlling your main system

10 Beo4 extra functions...

11 Presetting the volume level

This guide describes how to operate the BeoLab 2000, and how to operate your main Bang & Olufsen system via the BeoLab 2000.

The separate Setting-up guide, which is also enclosed, describes how to install the system and make the BeoLab 2000 ready for use.

Note: The BeoLab 2000 is designed to be used in a Bang & Olufsen BeoLink system (ML) only. Please contact your Bang & Olufsen dealer for further information.

N I C E T O K N O W A B O U T 4

..Music in other rooms

The BeoLab 2000 gives your main Bang & Olufsen system an extra dimension:

Now you can listen to any source you like from your main system (audio or video) in the room with your BeoLab 2000.

And you can even operate functions in your main system directly on the BeoLab 2000 or using the Beo4 remote control.

All you have to do, is connect the BeoLab 2000 to your BeoLink installa- tion, and your main Bang & Olufsen system can be used in that room as well.

The BeoLab 2000 fits in easily wherever you want music: You can place it in a corner; you can hang it on the wall; or you can place it standing on a shelf or a sideboard.

No matter how, the two active speakers in the BeoLab 2000 will give you the full benefit of the high-quality stereo sound produced by your main Bang & Olufsen system.

TV C D

R A

D IO

TI M

ER

BANG & OLUFSEN

5

Operating the BeoLab 2000 close-up, you can: Listen-in on the source that is currently playing

in your main Bang & Olufsen system; or switch on to the radio (or TV) program that was last playing.

Switch on the radio, the CD player, or the audio tape recorder in your main system.

Step through radio or TV programs, or tracks on a tape or a CD.

Adjust the volume level in the two BeoLab 2000 loudspeakers quite independently of your main system.

Include the BeoLab 2000 in a Timer Play programming of your main system.

Using the Beo4 remote control, you can: Switch on any source you like in your main

Bang & Olufsen system (audio / video) via the BeoLab 2000.

Operate a number of functions for the source you are listening to on the BeoLab 2000.

Preset your preferred volume level in the BeoLab 2000.

Your main Bang & Olufsen system (audio, video, or AV) and your BeoLab 2000 must be interconnected by a Bang & Olufsen BeoLink installation (ML).

You can then listen to any source you like from your main system (and control the source) in the room with your BeoLab 2000.

C L O S E - U P O P E R A T I O N6

Sound control

Another way of switching on, is to press the specific button for the source you want to listen to from your main audio system: TV (TV), CD (CD player), or RADIO (radio).

No matter how you switch on, the sound from your main system will be heard instantaneously in the BeoLab 2000 speakers.

While you are listening to the BeoLab 2000, you can step through your radio (or TV) programs; or through the tracks on the CD or the tape you are listening to. Just press the twin-button marked or repeatedly.

If you press PLAY again briefly, the BeoLab 2000 switches off.

Note: If you press the PLAY button for two seconds or more, both the BeoLab 2000 and your main system will switch off.

* Note: If your main Bang & Olufsen system consists of a video system only (with no audio sources), pressing PLAY will switch on the TV program that was last playing.

To switch on the BeoLab 2000 you must either press the circular PLAY button in the end of the operation panel; or you must press one of the three audio buttons (TV, CD, or RADIO):

The PLAY button enables you to listen-in on your main Bang & Olufsen system if it is currently playing. Just press PLAY once!

If your main system is not playing, pressing PLAY will switch on the radio* at the program that was last playing.

The small BeoLab 2000 operation panel has six push-buttons and a volume control

button for close-up operation.

Below the operation panel there is a small display. The red light to the left in the display is a stand-by indicator. The red

light changes to green when the BeoLab 2000 is switched on. The red light to the

right in the display indicates that the Timer Play function is cut in.

PLAY

7

Volume adjustment

Timer Play control

The BeoLab 2000 always switches on at the same, preset volume level.

The volume control (turn-button to the right on the operation panel) allows you to turn the volume up or down as you like.

Volume is adjusted quite indepen- dently of your main Bang & Olufsen system.

Note: See how to preset the volume start-up level in the BeoLab 2000 on page 11.

If you have programmed your main Bang & Olufsen system to start playing automatically (Timer Play) for example to wake you up in the morning, you can include the BeoLab 2000 as well.

To do so, just press the TIMER button on the operation panel.

A small red light then appears in the display (just below the TIMER button). The red light indicates that the BeoLab 2000 will be included as well, whenever your main system starts playing a Timer Play programming.

Press TIMER again if you want to cut out the Timer function (the red light disappears).

> Note: The Beo4 remote control enhances the possibilities and gives you the full benefit of your BeoLab 2000 (see pages 8-11).

If your main Bang & Olufsen system is in stand-by when you switch on the BeoLab 2000, you will only get sound in the BeoLab 2000 speakers the loudspeakers in your main system will not be cut in.

If you try to switch on a source in your main Bang & Olufsen system, and you get the sound from a different source (or no sound at all) in your BeoLab 2000 speakers, it may be because a recording is progressing in your main system. This special lock function ensures that the recording will not be spoiled.

If there is no light to the left in the display (no stand-by indicator), it may be because the mains-switch on the back of the BeoLab 2000 is switched off. Please refer to the section Ready for use in the Setting-up guide for further information.

R E M O T E O P E R A T I O N8

Using the Beo4 remote control

The Beo4 remote control gives you the full benefit of your BeoLab 2000.

With the Beo4 remote control you can switch on any source you wish to listen to from your main Bang & Olufsen system (audio/video), and control the daily playback functions for that source in the room with your BeoLab 2000.

Operation is then carried out just as if you were operating your main system directly, using the Beo4 remote control.

Furthermore, Beo4 is the key to presetting the volume level in the BeoLab 2000 loudspeakers.

The Beo4 remote control and the BeoLab 2000 both respond readily to your instructions giving you sound in the speakers within seconds after pressing the button.

See how on the next few pages...

The Beo4 remote control is available as an optional extra at your Bang & Olufsen dealer. Please refer to the Beo4 Users guide for information about the remote control and its principles of operation.

Any remote operation you make is received by the BeoLab 2000.

Via your BeoLink installation, the BeoLab 2000 communicates your instruction to

your main Bang & Olufsen system.

TV LIGHT RADIO

SAT DVD CD

V TAPE RECORD A TAPE

7 8 9

4 5 6

TEXT 0 MENU

1 2 3

LIST EXIT

STOP

GO

ss

B E O C E N T E R 9 3 0 0 9

Controlling your main system

Via your BeoLab 2000, you can switch on any source you like (audio/video) from your main Bang & Olufsen system, and listen to it on the BeoLab 2000 speakers.

To do so, simply press the appropriate source button on the Beo4 remote control.

While the source is playing, you can adjust the volume level, switch programs, listen to specific tracks or CDs, stop and resume playback, etc.

The button to the right on this page show you how...

To switch off the BeoLab 2000 simply press the red stand-by button on the Beo4 briefly.

Note: If you keep pressing the stand-by button for two seconds or more, you will switch off both the BeoLab 2000 and your main Bang & Olufsen system.

Note: The functions mentioned in this guide are only available from the BeoLab 2000 in so far as the source in question is included in your main Bang & Olufsen system and provided the source supports the function.

For further information about these functions, please refer to the Users guide for your main Bang & Olufsen system.

Switches on the radio

Starts the CD player

Starts the audio tape recorder

Switches on the TV

Switches on to satellite

Starts the video tape recorder

Raises the volume

Lowers the volume

Press to step through your programs; or to step from track to track on a CD or a tape

Alternatively, key in the exact program you want or track number on a single CD player

On a audio or videotape recorder and single CD player

Rewinds a tape, searches backwards on a CD in a single CD player

Fastforwards a tape, searches forwards on a CD in a single CD player

Press to resume playback

> See the next page for further information...

A TAPE

TV

SAT

V TAPE

RADIO

CD

Please note... The functions mentioned on this page can also be operated using the Bang & Olufsen Beolink 1000 remote control. You will find that the texts and symbols on the buttons of the two remote controls are almost the same (only, you must press PLAY instead of GO).

Note: Pressing the Beolink 1000 MUTE button, while the BeoLab 2000 is in stand-by, corresponds to pressing PLAY directly on the BeoLab 2000 (see page 6).

0

9

through

or

ss

GO

or

> Remote operation Controlling your main system10

Beo4 extra functions... Pressing and simultaneously on the Beo4

remote control, while the BeoLab 2000 is in stand-by, corresponds to pressing PLAY directly on the BeoLab 2000 (see page 6).

To turn the tape in your audio tape recorder to play the other side, press the Beo4 LIST button to display TURN*, then press the GO button.

To switch mono/stereo sound or language on a radio, TV or satellite program, or to switch sound track on a video tape, press the LIST button to display SOUND*, then press GO (repeatedly).

To play the tracks on a CD in ramdom order, press LIST to display RANDOM, then press GO.

To start playback on a Bang & Olufsen record player, press LIST until the display reads PHONO*, then press GO. Pressing or while the record is playing, makes the record player step through the music.

To start playback on a secondary audio- or video tape recorder, or a secondary CD player in your main Bang & Olufsen system, press the Beo4 LIST button to display A.TAPE2*, V.TAPE2*, or CD2*, then press GO.

To switch on a DVD or CDV player connected to your main video system, press DVD on Beo4.

If you use your BeoLab 2000 in the same room as your main Bang & Olufsen system, you must program the BeoLab 2000 accordingly (see how in the Setting-up guide). In that case, to start playing a source in your main system via your BeoLab 2000, press the Beo4 LIST button to display LINK*, then press RADIO, CD, A TAPE, TV, SAT, or V TAPE. The index in the Beo4 Users guide gives information about the Beo4 remote control andLINK.

*Note: In order to display TURN, SOUND, PHONO, A.TAPE2, V.TAPE2, CD2, CDV, or LINK on Beo4, you must add the cues to Beo4s list of functions, please refer to Beo4s own Users guide for further instruction.

On a multi CD player

Press to change to the next or previous CD

Key in a disc number directly to play a particular CD

Press to search forwards on a CD

Press to search backwards on a CD

To select a particular track on one CD Press until TRACK* is displayed

Key in a track number, e.g. number11

Press to pause your CD player, or your audio or video tape recorder (Press STOP twice to stop the video)

Press any time to resume playing

Press briefly to switch off the BeoLab 2000

*Note: In order to display TRACK on Beo4, you must add the function to the Beo4 list of functions, please refer to Beo4s own Users guide and the chapter, Customising your Beo4, for further instruction.

1

1

STOP

1

6

through

or tt

ss

or

then

GO

LIST

Note: The functions mentioned here are only available in so far as they are supported by your main Bang & Olufsen system.

11

Note: The BeoLab 2000 always returns to the preset volume level when you switch it to stand- by, but you can also make it return to the preset level by pressing the Beo4 LIST button to display RESET*, then press GO.

*Note: In order to display A.SETUP on Beo4 and S.STORE which will then appear automatically, you must add the function to the Beo4 list of functions. You must also add RESET to the Beo4 list of functions. Please refer to Beo4s own Users guide and the chapter, Customising your Beo4, for further instruction.

Adjust the volume level to your liking

Press until A.SETUP* is displayed

Press to be able to store

Press until S.STORE* is displayed

Press to store the current setting

Presetting the volume level

When you have adjusted the volume level in the BeoLab 2000 speakers, the Beo4 remote control enables you to preset the level in the BeoLab 2000 so that it always switches on at that level.

All you have to do, to turn your adjustment into a permanent setting, is find the cues A.SETUP* and then S.STORE* in the Beo4 display and press GO.

or

LIST

GO

then

LIST

GO

then

N O T E S12

Date purchased

Contact person

Dealer

Telephone

Address

Record your serial numbers here:

BeoLab 2000

Beo4 remote control

Dear Customer,

Your needs as the user of our products are always given careful consideration during the design and development process, and we strive to make our products easy and comfortable to operate.

We therefore hope that you will take time to drop us a line, telling us about your experiences with your Bang & Olufsen system. Anything which you consider important positive or negative may help us in our constant efforts to refine our products. Thank you! Please write to:

Customer information dept. 7240 Bang & Olufsen a/s DK-7600 Struer Denmark

3508226 0001 Prin

Manualsnet FAQs

If you want to find out how the Beolab 2000 Bang Olufsen works, you can view and download the Bang Olufsen Beolab 2000 User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Bang Olufsen Beolab 2000 as well as other Bang Olufsen manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Bang Olufsen Beolab 2000. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Bang Olufsen Beolab 2000 User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Bang Olufsen Beolab 2000 User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Bang Olufsen Beolab 2000 User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Bang Olufsen Beolab 2000 User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Bang Olufsen Beolab 2000 User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.