Contents

Bang Olufsen Beosound 3200 User's Guide PDF

1 of 48
1 of 48

Summary of Content for Bang Olufsen Beosound 3200 User's Guide PDF

BeoSound 3200 Guide

B&O_omslag_202x261.indd 1 02/12/08 11:53:39

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No User-serviceable parts inside. Refer servicing to qualified service personnel.

WARNING: To prevent fire or electric shock, do not expose this appliance to rain or moisture.

This symbol indicates that a dangerous voltage constituting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

Contents 3

Introducing your Bang & Olufsen music system, 4

Get to know your music system, see how the buttons are organised on the

operation panel, understand and change information in the display.

Daily use, 9

Find out how to use your music system, play music from the CD memory, use the

CD player and the radio, and find out how to use the Beo4 remote control.

Advanced operation, 15

Find out more about the advanced operations; how to play favourite CD tracks

only, use the random and repeat functions, copy and store a CD in the CD

memory, name your CD memory groups, your CDs and radio stations.

Furthermore, learn how to edit the CD memory; copy, move and delete, and how

to make the music system start or stop at a specific time as well as how to operate

an Audio/Video system.

Placement, connections, and maintenance, 27

Find out how to place, connect and assemble your music system. How to connect

your music system to your video system, how to clean your music system and your

CDs, and how to change Beo4 batteries. Including instructions regarding the CD

memory.

Tuning and preference settings, 33

Find out how to tune in radio stations, adjust sound and set the clock, activate the

PIN code system and enter a PIN code, configure Beo4 to work with your

products, and add extra buttons to your Beo4.

Index, 42

Find the specific subject you want to know more about.

4

Reach out as if to touch the glass

doors and your BeoSound opens

automatically, revealing the music

system behind the doors.

Use your music system to listen to

radio, to play a single CD and to play

from the CD memory.

Introducing your music system

Socket for headphones. When the head-phones are plugged in,

the speakers, connected to your music system, are muted.

Press the LOAD button to raise the clamp which

holds the CD in place.

You can now remove a CD or load one you want

to play. Always load a CD with the label facing

you.

Press LOAD again to lower the clamp. If you press

CD, the clamp lowers automatically and playback

begins.

LOAD CD 1 6

RADIO CD ALL AUX 2 7

CD MEM

GO

RANDOM REPEAT NAME 3 8

MOVE EDITCOPY 9 DISPLAYSTOP

DELETE TIMER

4

5 0SETUP MUTE

TRACK 1 2 3 4 5 6 7 8 9 10 RANDOM

1. Nomeooo jxisks skjs kskd skd oo jxisks 2. Skjs kskd skd oo

3. Jxisks skjs kskd skd Nomeooo 4. Jxisks skjs kskd skd oo jxisks skjs kskd

5. Skd oo jxisks skjs kskd skd

5

The CD memory offers you the

possibility to store the contents of

your CDs inside the music system. It

has four available groups and each

group can hold up to 99 CDs. Forget

about finding and loading CDs one

by one, you have instant access to

your CD collection, all stored in the

same player.

When your CDs are copied into the

memory, you can store them out of

sight.

To help you organise your CD memory groups, use the booklet enclosed with this Guide; each group is represented by the colour of the button activating it, and there is room for you to enter the group names, CD names as well as track names.

Each of the four coloured buttons represents a CD memory group.

Naming and organising You can provide each of the four groups with a

new name and create your own structure. You can

choose to store all your CDs in one group or store

them in different groups organised for example by

genre, and name the groups accordingly: POP,

BLUES, etc. Another way of organising the CDs is

according to the different users of the music

system, such as: MY MUSIC, MUM or PETER. It is

all up to you.

Memory groups When you copy your CDs, you must store the

contents in one or more of the four groups already

created in the CD memory. The four groups are

associated with the four coloured buttons on the

operation panel; green, yellow, red and blue,

which are also the names that will appear in the

display, unless you name the groups as described

on page 20.

1. Nomeooo jxisks skjs kskd skd oo jxisks 2. Skjs kskd skd oo

3. Jxisks skjs kskd skd Nomeooo 4. Jxisks skjs kskd skd oo jxisks skjs kskd

5. Skd oo jxisks skjs kskd skd

1. Nomeooo jxisks skjs kskd skd oo jxisks 2. Skjs kskd skd oo

3. Jxisks skjs kskd skd Nomeooo 4. Jxisks skjs kskd skd oo jxisks skjs kskd

5. Skd oo jxisks skjs kskd skd

1. Nomeooo jxisks skjs kskd skd oo jxisks 2. Skjs kskd skd oo

3. Jxisks skjs kskd skd Nomeooo 4. Jxisks skjs kskd skd oo jxisks skjs kskd

5. Skd oo jxisks skjs kskd skd

1. Nomeooo jxisks skjs kskd skd oo jxisks 2. Skjs kskd skd oo

3. Jxisks skjs kskd skd Nomeooo 4. Jxisks skjs kskd skd oo jxisks skjs kskd

5. Skd oo jxisks skjs kskd skd

1. Nomeooo jxisks skjs kskd skd oo jxisks 2. Skjs kskd skd oo

3. Jxisks skjs kskd skd Nomeooo 4. Jxisks skjs kskd skd oo jxisks skjs kskd

5. Skd oo jxisks skjs kskd skd

1. Nomeooo jxisks skjs kskd skd oo jxisks 2. Skjs kskd skd oo

3. Jxisks skjs kskd skd Nomeooo 4. Jxisks skjs kskd skd oo jxisks skjs kskd

5. Skd oo jxisks skjs kskd skd

1. Nomeooo jxisks skjs kskd skd oo jxisks 2. Skjs kskd skd oo

3. Jxisks skjs kskd skd Nomeooo 4. Jxisks skjs kskd skd oo jxisks skjs kskd

5. Skd oo jxisks skjs kskd skd

1. Nomeooo jxisks skjs kskd skd oo jxisks 2. Skjs kskd skd oo

3. Jxisks skjs kskd skd Nomeooo 4. Jxisks skjs kskd skd oo jxisks skjs kskd

5. Skd oo jxisks skjs kskd skd

LOAD CD 1 6

RADIO CD ALL AUX 2 7

CD MEM

RANDOM REPEAT NAME 3 8

MOVE EDITCOPY 9

DELETE TIMER

4

5 0SETUP

TRACK 1 2 3 4 5 6 7 8 9 10 RANDOM

6

All the buttons are conveniently

grouped according to type of

function, so you can easily find your

way around the panel while

operating the system.

The displays on the music system

give you various types of

information. You choose which type

of information is displayed.

Close-up operation panel and displays

LOAD CD 1 2

RADIO CD ALL AUX 3 4

CD MEM

GO

RANDOM REPEAT NAME 5 6

MOVE EDITCOPY 8 DISPLAYSTOP

DELETE TIMER

7

9 0SETUP MUTE

TRACK 1 2 3 4 5 6 7 8 9 10 RANDOM

Displays The displays tell you what the system is doing.

The cues in the upper display relate to

functions in the CD player, e.g. track number.

The lower display shows, for example, the name

of the current radio station or CD memory group.

It also guides you through setting up and

programming sequences.

Source buttons and CD memory functions This group of buttons gives access to sources as

well as setup, playback and Timer functions.

Number buttons The number buttons enable you to

select other station numbers, select

tracks on a CD, or select CDs and

tracks in the CD memory.

7

Change the information in the display You can switch between different types of

information by pressing DISPLAY repeatedly when

the radio, CD player or CD memory is switched

on.

Three different display settings are available for the radio: 1 Station name 2 Station number 3 Radio frequency

Three display settings are available for the CD player: 1 Name of CD 2 Track number 3 Elapsed time of current track

Two display settings are available for the CD memory: 1 Name of the group, then the CD name

appears 2 Group, CD number and track number

Primary functions The buttons on the right-hand side of the

panel give you access to all primary

functions: switching the system on and off,

adjusting volume, muting sound, and

operating the radio, CD player, and CD

memory.

The radio station named CLASSIC is playing.

TRACK 1 2 3 4 5 6 7 8 9 10 SCAN

The CD is being scanned meaning that the first 15

seconds of each track is played. The current track

number is 5.

The current radio station is transmitting on FM

frequency 94.6.

TRACK 1 4 5 6 8 10 REPEATCD ED

This CD is edited, meaning that some tracks will

not be played, also the tracks will be repeated.

The current track has been playing for 2 minutes

and 15 seconds.

TRACK 1 2 3 4 5 6 7 8 9 10 RANDOM

The ten tracks on the CD named MOZART will be

played in random order.

Track number 15 on CD number 12 in the green

CD memory group is playing.

8

9

This chapter informs you of the basic

functions of your music system. How

to play back music from the CD

memory or a CD, how to use the

radio and finally how to use the

Beo4 remote control, if you have

one.

For information about more

advanced operation, such as copying

the contents of a CD into the CD

memory, refer to the next chapter

Advanced operation on page 15.

If PIN appears in the display the first time you activate a function, and you have not received a PIN code from your Bang & Olufsen retailer, contact your retailer to receive a PIN code. For further information about the PIN code function, refer to the chapter Set and enter a PIN code on page 38.

Daily use

Play from the CD memory, 10

CD memory playback

Play a specific group, CD or track

Use the CD player, 11

Play a CD

Use the radio, 12

Switch on the radio

Use the Beo4 remote control, 13

10

Once you have copied your CDs into

the CD memory, they are stored until

you delete them. You can now easily

play all your music CDs.

When you switch on the CD memory, the group and the CD you last played start playing. You can then select other CDs or tracks within the group, select another group or perhaps a specific CD in another group. To activate a group, press the corresponding button on the close-up operation panel. The groups are distinguished by the colours: green, yellow, red and blue when you start out, but you can choose to give the groups a name. Refer to page 19 for further information.

Unless you choose differently, playing continues from the CD memory for 12 hours.

Play from the CD memory

CD memory playback

Press to play the CDs in the

group you last listened to

Press to play the CDs stored in

the green group

Press to play the CDs stored in

the yellow group

Press to play the CDs stored in

the red group

Press to play the CDs stored in

the blue group

If no CDs are stored in the group

you wish to play from, the

display will read EMPTY

Press to step to the next CD in

the group, or

Press to step to the previous CD

in the group

Press to play the next track, or

Press to play the previous track

Press to pause playing

Press to resume playing

Adjust volume Press to adjust the volume up or

down

Press to silence the speakers

completely, press again to restore

sound

Press to switch to standby

CD MEM

EMPTY

tt

ss

STOP

GO

MUTE

Play a specific group, CD or track

Press to play the CDs in the

group you last listened to

Press to select the group you

wish to play from

Key in the number of a specific

CD in this group, or

Press to step between CDs

Press GO then key in the number

of a specific track, or

Press to step to the next track

Press to step to the previous

track

CD MEM

1 9

ss tt

GO 1 9

11

Before playing a loaded CD, all

information on the CD is registered,

such as the number of tracks. Then

the CD starts playing from the

beginning. Playback continues until

the whole CD has been played,

unless you choose differently.

You can always keep track of what the CD player is doing by watching the displays. The displays show either track number or track time, depending on which display mode it has been set to. If you have named the CD, the name will also be shown in the display*

Use the CD player

Play a CD

Press to play a loaded CD

Press to play specific track

numbers

Press to play the next track

Press to play the previous track

Press to pause playing

Press to resume playing

Press to search forward toward

the end of the CD

Press to search backward toward

the beginning of the CD Keep

the button pressed down until

you have reached the point you

want

Adjust volume Press to adjust the volume up or

down

Press to silence the speakers

completely, press again to restore

sound

CD

0 9

STOP

GO

tt

ss

MUTE

NOTE! BeoSound 3200 automatically switches

to standby if idle for 30 minutes. *If the

display has been set to show the name of the

CD, only the name will appear in the display

and you cannot follow the elapsed time

process. See page 7 for details of the various

display modes.

TRACK 1 2 3 4 5 6 7 8 9 10 RANDOM

The CD playing has been named MOZART. The

tracks are being played in random order.

1. Nomeooo jxisks skjs kskd skd oo jxisks 2. Skjs kskd skd oo

3. Jxisks skjs kskd skd Nomeooo 4. Jxisks skjs kskd skd oo jxisks skjs kskd

5. Skd oo jxisks skjs kskd skd

12

To listen to the radio, you must first

find and store the frequencies of the

radio stations.

You can store up to 60 different

radio stations in your music system.

Refer to the chapter Tune in radio

stations on page 34 for further

information.

Use the radio

Switch on the radio

Press to switch on the radio

Use the number keys to select a

stored station

Step through all stored stations

Switch to standby

Pressing 0 switches between the present and

previous radio station.

Adjust volume Press to adjust the volume up or

down

Press to silence the speakers

completely. Press again to restore

sound

RADIO

0 9

MUTE

Radio program 3 is playing.

13

Although designed primarily for

close-up operation, the music system

can also be operated from a

distance. The Beo4 remote control

operates all the primary functions in

your Bang & Olufsen product.

With Beo4, you can switch on or off, select radio stations or CD tracks. It is also possible to switch on the special random and repeated playback functions in the CD player, as well as adjust the sound.

If your music system is used together with other Bang & Olufsen products, refer to the Guides delivered with these products for further explanation.

Use the Beo4 remote control

TV LIGHT RADIO

SAT DVD CD

V TAPE RECORD A TAPE

7 8 9

4 5 6

TEXT 0 MENU

1 2 3

LIST EXIT

STOP

GO

Switches on the radio

Switches on the CD player

Switches on the CD memory Corresponds to

the CD MEM button on the close-up operation

panel

Use the number buttons to key in the exact radio program number, CD or CD track number

Press to make a Timer programming

Steps through your radio programs, or tracks on a CD. Press when RANDOM or REPEAT is shown in the display, to activate the function, and press to switch it off when the function is displayed

Searches through a CD

Selects a CD memory group

Resumes playback accepts settings, etc. Activates the source or function in the Beo4 display

Pauses playback any time

Displays extra buttons*, e.g. RANDOM or REPEAT

Turns the volume up or down, press in the middle to mute speakers, press again to recall sound

Switches the BeoSound 3200 to standby

RADIO

CD

A TAPE

0 9

MENU

ss tt

GO

STOP

LIST RANDOM

REPEAT

*NOTE! In order to display the relevant extra

buttons on the Beo4, you must add them to

the Beo4 list of functions: Add RANDOM and

REPEAT to Beo4 to use these functions. Add

A.AUX to be able to switch on any other

source connected to the AUX-socket. Refer to

the chapter Customise Beo4 on page 40 for

further information.

14

15

Find out how to operate your music

system beyond daily use. Explore the

different ways of playing CDs. Learn

how to copy music into the CD

memory and find out how to

personalise your music system by

naming CD memory groups, CDs

and radio stations. Organise the

music to your liking and find out

how to make the music system start

or stop at a specific time.

Furthermore, read about the

different ways of using an

Audio/Video setup.

Advanced operation

Play favourite tracks only, 16

Edit a CD

Play or delete a series of tracks

Random and Repeat, 17

Different ways of playing CDs

Copy and store a CD, 18

Copy and store an entire CD

Copy and store favourite tracks

Naming, 20

Use the naming function

See the list of CD names

CD memory copy, move and delete, 22

Copy a CD to another group

Move a CD to another group

Give a CD a new position in a group

Delete a CD or tracks in a group

Start or stop at a specific time, 24

Set a Timer

Check the Timers

Delete a Timer

Use an Audio/Video setup, 26

Play audio or video sound on either system

16

If some of the tracks on a CD are not

to your liking, you can edit the CD,

so that only the tracks you like and

select are played. Once you have

edited a CD and selected your own

series of tracks, then, every time you

play this CD, the music system starts

playing the series of tracks you have

chosen. But you can still listen to the

entire CD. You can also delete the

series of tracks you have made, to

always play the CD in full. The

selected tracks are played in

numerical order.

Load the CD you want to edit and start the editing procedure. In editing mode you will hear the first 15 seconds of each track which leaves time for you to decide whether to include or exclude the track. If you do not make a selection of whether to include or exclude the track being played, it is automatically included.

If you choose to leave the function before you have included or excluded all the tracks on the CD, the remaining tracks will be regarded as excluded.

Play favourite CD tracks only

Edit a CD

While the CD is playing, press to

edit the CD.

EDIT ? appears

Press to start scanning the CD.

EDITING appears and SCAN is

shown in the upper display

Press to include a track number

in the series, or

Press to exclude a track number

from the series

EDIT OK ? appears in the display

when the last track has been

included or excluded

Press to store the series.

STORED appears

Press at any time if you wish to

terminate the editing procedure

before the last track has been

included or excluded

If you change your mind while you are choosing

your tracks, just press the CD button and the EDIT

button again and start over.

EDIT EDIT ?

GO EDITING

EDIT OK ?

GO STORED

GO

Play or delete a series of tracks

Press to play your edited series of

tracks. CD ED appears

Press to play the entire CD

To delete a series of tracks While the edited CD is playing,

press to delete the series.

EDIT ? appears

Press to delete the series

altogether. DELETED appears

Track selection can also be used in conjunction

with the functions of playing tracks in random

order and repeating a CD, see the next page.

NOTE! If you copy a CD you have edited into the

CD memory, all tracks will be copied, unless you

specify differently before copying. Refer to the

chapter Copy and store a CD on page 18 for

further information.

CD CD ED

CDALL

EDIT EDIT ?

DELETE DELETED

17

The random playback function plays

all the tracks on the loaded CD or in

the chosen CD memory group in

random order. The repeat function

plays the loaded CD over and over

for up to 12 hours on end. These

functions can be used in conjunction

or separately.

Random and repeat

Different ways of playing CDs

Press to play the loaded CD, or

Press to play the CDs in the

group you last listened to

Press to choose a different group

Press to activate the random

function

ON appears and RANDOM is

shown in the upper display

To repeat a CD Press to play the loaded CD

Press to activate the repeat

function

ON appears and REPEAT is

shown in the upper display

To cancel the random or repeat function, simply

press the relevant button again.

CD

CD MEM

RANDOM

ON

CD

REPEAT

ON

NOTE! If you cancel the random play function

while the CD is playing, all tracks beyond the

current track number will be played in

chronological order, even if they have already

been played while the random play function

was activated.

TRACK 1 2 3 4 5 6 7 8 9 10 RANDOM

The upper display shows that the current CD is

being played in random order, and that track no. 5

is being played. The lower display shows that the

name of the CD is MOZART.

TRACK 1 4 5 6 8 10 REPEATCD ED

The upper display shows that the edited CD is

being repeated. The lower display shows that the

current track has been playing for 2 minutes and

15 seconds.

18

Press to play the loaded CD

Press to start copying the CD

The display indicates to copy all

tracks

Press to copy the entire CD

Press to choose which group to

store your CD in green, yellow,

red or blue

The first available position in the

chosen group is suggested, but

you can choose another

position

Press to step between available

positions, or

Key in the number of the

position you want , or

Press to start copying

If the CD is copy protected, the

display will indicate this shortly

When the copying of a coded

CD is complete, CODED is

displayed, and you must confirm

that you wish to store the copy*

CD

COPY

ALL ?

GO COPY TO ?

17 ?

0 9

GO COPYING

CODED CD

CODED

GO

Once the CD is copied and

stored, COPY OK appears in the

display

COPY OK

The easiest way to copy music into

the CD memory is to copy the entire

CD. Just load the CD and start

copying. The duration of the copying

depends on the length of the CD.

The quality of the music in the CD

memory corresponds to the quality of

the original CD. The CD can be heard

during copying but you can also

choose to mute the speakers while

copying.

Copy protected CDs can still be

copied to the memory of your own

music system. However, if the CD

you have copied is copy protected,

you must confirm that you wish to

store the copy. Otherwise it is

automatically deleted when the

system switches to standby

approximately 30 minutes after

finishing the copying.

Copy protection information may be placed anywhere on the CD. Therefore, this information may appear at any time when you copy such a CD. When this information is detected by your music system, CODED CD appears in the display but the music system continues copying the CD.

If the memory group you choose is full when you want to copy a CD into it, the display reads FULL. You have to delete a CD before copying a new one into the group.

To stop copying Press to stop the entire copy is

then deleted

*If you choose not to store the copy of a copy

protected CD, press STOP to delete the copy.

CD MEM STOP

NOTE! If you do not specify a position, the CD is

placed on the first available position within the

selected group.

Copy and store a CD

Copy and store an entire CD

19

*If you choose not to store the copy of a copy

protected CD, press STOP to delete the copy.

If a CD is already edited (see page 16), it is still copied in full if you select ALL. It is also possible to copy selected tracks only by editing the CD. In editing mode, you hear the first 15 seconds of each track. This leaves you time to decide whether to include or exclude the track. If you choose to leave the function before you have heard all the tracks on the CD, the remaining tracks will be regarded as excluded.

If your music system is set for Option 0 (see page 31) and you switch on TV while copying, the music system switches to standby when copying is complete. Therefore, to be able to store a copy of a copy protected CD, you must make sure that the music system is activated while copying.

Press to play the loaded CD

Press to start copying the CD

Press to be able to select which

tracks to include

Press to start editing the CD

Press to include the track

Press to exclude the track

Press at any time to store the

tracks you have included so far

EDIT OK? appears in the display

when the CD has been edited

Press to be able to choose which

group to store your CD in

Press to choose a group

The first available position in the

chosen group is suggested, but

you can choose another

position

Key in the number of the

position you want

Press to start copying

If the CD is copy protected, the

display indicates this shortly

CD

COPY ALL ?

EDIT EDIT ?

GO EDITING

GO

EDIT OK?

GO COPY TO ?

17 ?

0 9

GO COPYING

CODED CD

When the copying of a coded

CD is complete, CODED is

displayed, and you must confirm

that you wish to store the copy*

Once the edited CD is copied

and stored, COPY OK appears in

the display

CODED

GO

COPY OK

Copy and store favourite tracks

20

To distinguish between your CDs,

both physical CDs and the ones

stored in the CD memory, you can

name them. You can also name the

radio stations and the CD memory

groups.

When naming a CD or radio station, the CD or radio station you are naming must be playing. You can store a total of 200 CD names in your music system, however, all CDs stored in the CD memory can be named. Each name may contain up to 8 characters, including numbers.

If you do not name a radio station, a name, transmitted by the broadcaster, may be shown in the display.

You can call up a list of the CD names stored in your music system (not the ones assigned to CDs in the CD memory) and delete names in the list if you wish. If you delete the name of a CD you have edited, the edited series for this CD is deleted with the name.

Naming

CD MEM

0 9

RADIO 0 9

CD

NAME A _ _ _ _ _ _

tt

D _ _ _ _ _ _

GO STORE ?

GO STORED

See the list of CD names

While any CD is playing press

twice to see the CD names.

MEMORY appears briefly, then

the name of the current CD

flashes. If it has no name, the

disc number, e.g. DISC 1,

appears

Press to list the names one by

one

Delete CD name Press to delete a name and series

of tracks while the appropriate

name is displayed. DELETE ?

appears

Press again to delete name and

series of tracks.

DELETED appears, indicating that

the name and series of tracks are

deleted

Press CD to exit the CD naming

function

If the CD name list is empty,

EMPTY will appear in the display

If the CD name list is full,

FULL will appear in the display

NAME NAME MEMORY

DISC 1

DELETE DELETE ?

DELETE DELETED

CD

EMPTY

FULL

Use the naming function

First choose what you wish to name Select the group you wish to

name, and/or

Press to switch on the CD

memory

Select the CD in the CD memory

you wish to name, or

Press to switch on the radio

Select the radio stations you wish

to name, or

Press to name a loaded CD

While listening to what you wish to name Press to start naming

Press to switch between

characters

Press to move to the next

character position continue to

enter the whole name

Press to be able to store the

name. STORE ? appears

Press again to store the name*.

STORED appears indicating that

the name is stored

*If you press DELETE instead of GO, only the name

is deleted, all other settings remain.

21

22

You can copy or move CDs between

CD memory groups or rearrange the

positions for each CD within a

group, for example to make a

temporary party play list in one

group, or you can copy a CD to a

group dedicated to another user.

Once copied, the CD is available in

both groups. It is also possible to

delete entire CDs, or tracks which

you no longer want in your CD

memory.

When you copy or move a CD, the CD is copied or moved to the first available position. If you want to copy or move a CD into a position already occupied, you must move or delete the CD occupying this position first.

CD memory copy, move and delete

Copy a CD to another group

Press to play the CDs in the

group you last listened to

Press to select the group you

wish to copy from

Press to select the CD you wish

to copy the CD starts playing

Press to be able to copy the CD

to another group

Press to select the group you

wish to copy to

Press to select a position for the

CD in its new group

Press to copy the CD to the new

group. COPYING appears in the

display

Once copying is completed,

COPY OK appears

CD MEM

0 9

COPY COPY TO ?

15 ?

0 9

GO COPYING

COPY OK

Move a CD to another group

Press to play the CDs in the

group you last listened to

Press to select the group you

wish to move a CD from

Press to select the CD you wish

to move the CD starts playing

Press to be able to move the CD

to another group

Press to select the group you

wish to move the CD to

Press to select a position for the

CD in the new group

Press to move the CD to the new

group. MOVING appears in the

display

Once moving is completed,

MOVED appears

CD MEM

0 9

MOVE MOVE TO ?

15 ?

0 9

GO MOVING

MOVED

23

Give a CD an new position in a group

Press to play the CDs in the

group you last listened to

Press to select the group you

wish to move a CD from

Press to select the CD you wish

to move the CD starts playing

Press to be able to move the CD

Press to select the same group

again

Press to select the new position

Press to move the CD to the new

position. MOVING appears in the

display

Once moving is completed,

MOVED appears

CD MEM

0 9

MOVE MOVE TO ?

15 ?

0 9

GO MOVING

MOVED

Delete a CD or tracks in a group

Press to play the CDs in the

group you last listened to

Press to select the group you

wish to delete a CD or track

from

Press to select the CD you wish

to delete or delete a track from

the CD start playing

Press to be able to delete the CD

or tracks from it

Press to delete the entire CD,

or

Press if you wish only to delete

certain tracks from the CD

Press to be able to select the

tracks you wish to delete

Press to include the track you are

listening to, or

Press to exclude the track you

are listening to

DELETE ? appears in the display

when the last track has been

included or excluded

Press to delete the tracks you

have excluded. DELETED appears

CD MEM

0 9

DELETE 15 ?

DELETE

EDIT EDIT ?

GO EDITING

DELETE ?

DELETE DELETED

24

You can make the music system start

or stop playing at designated times

throughout the day and week.

The music system remembers up to

15 such Timers and you can use it to

wake you up in the morning to the

sound from either your favourite CD

or radio program. If, for example,

you want it to stop playing at a

specific time in the evening, you just

make a Timer with STANDBY as the

source.

If you set a Timer for Monday, Tuesday and Thursday, the Timer will be repeated on these days only, every week.

If you change your mind, your Timers can be changed or cancelled, at any time. When the music system is connected to a video system, the Timer must be set as described in the Guide for the video system. When you access the Timer function, the display will read USE TV. When you program a Timer via the video system, CD memory is chosen as source by selecting A TAPE. When you choose CD memory as your source, the system plays from the last used memory group, when the Timer is activated.

Start or stop at a specific time

Set a Timer

Press repeatedly until TIMER ?

appears in the display

Press to enter the timer function.

NEW ? appears

Press to make a new Timer.

RADIO ? appears

Press to switch between the

available sources

Press to select a source when it is

displayed If you have selected

radio, the program number

appears.

Press to step between program

numbers

Press to accept the source.

A start time appears

Key in the start time you want

Press to accept.

A stop time appears

Key in the stop time you want

If you make a STANDBY Timer,

then all you need to store is the

stop time.

Press to accept the time.

MTWTFSS appears

The letters represent the 7 days

of the week, starting with M for

Monday

SETUP TIMER ?

GO NEW ?

GO RADIO ?

GO P.NO 12 ?

GO ON 20:00

0 9

GO OFF 21:00

0 9

GO MTWTFSS

Press to move between the days

Press to include a day

Press to exclude a day

The selected days are displayed

Press to accept the days shown

in the display. STORE ? appears

Press to store the Timer.

STORED appears, indicating that

your Timer is stored

Press to activate the Timer and

cut in the loudspeakers

connected to BeoSound 3200

The green indicator light will

show when the Timer function is

activated

If you do not wish to store your Timer, pressing

when STORE ? is displayed, changes the display to

EXIT ?. Press GO to exit the Timer function

without storing the Timer.

If you leave the Timer function by pressing for

example a source button, before the Timer has

been stored, the Timer is automatically cancelled.

ss tt

MT T SS

GO STORE ?

GO STORED

TIMER

NOTE! The list of sources shown in the display

contains N.MUSIC (for music tracks stored on

your PC). This source is available if you have

connected your music system to BeoLink PC 2.

25

NOTE! You can also programme a Timer via

Beo4, just press the MENU button to access

the Timer function and follow the procedure

described on these pages.

Check the Timers

Press repeatedly until TIMER ?

appears in the display

Press to enter the Timer

function. NEW ? appears

Press to change the display to

CHECK ?

Press to see the Timers

Press to step through the

programmed Timers

If you wish to make corrections,

press GO when the Timer in

question is displayed

Press to change source, if you

wish

Press to accept, if you have

changed the source

Key in your corrections

Press to accept.

OK ? appears

Press to store. STORED appears,

indicating that your corrected

Timer is stored

SETUP TIMER ?

GO NEW ?

CHECK ?

GO

RADIO 12

GO

GO

0 9

GO OK ?

GO STORED

Delete a Timer

Press repeatedly until TIMER ?

appears in the display

Press to enter the Timer

function. NEW ? appears

Press to change the display to

CHECK ?

Press to see the Timers

Press to step through the

programmed Timers

When the Timer is displayed

Press DELETE to delete it.

DELETED appears, indicating that

the Timer is deleted

SETUP TIMER ?

GO NEW ?

CHECK ?

GO

RADIO 12

DELETE DELETED

26

When your music system is

connected to your video system via

the Master Link cable as described in

the chapter Audio/Video setup on

page 31, you can choose whether to

use the speakers connected to the

music system, if any, or the speakers

connected to the video system.

When your music system is connected to a video system and the speakers are connected to the video system, the video system takes over some of the functions mentioned in this guide, for example programming a Timer as described in the chapter Start or stop at a specific time on page 24. Also all remote control operations (audio and video) must be directed to the video system.

If your speakers are connected to your music system, your audio and video systems do not have to be placed in the same room, you can still listen to sound from either system on the speakers of either system.

Use an Audio/Video system

Play audio or video sound on either system

To listen to sound from your video system on your music system speakers without switching on the television screen Press repeatedly until AV* is

shown in the Beo4 display

Then press a video source button

such as TV

If you press a source button before as well as after

AV has been shown in the Beo4 display, the

television screen will be switched on.

To listen to sound from your music system on the television speakers Press repeatedly until AV is

shown in the Beo4 display

Then press an audio source

button, such as RADIO

LIST AV

TV

LIST AV

RADIO

*NOTE! If AV is not available in the Beo4

display, you must add it to the Beo4 list of

functions, refer to the chapter Customise Beo4

on page 40 for further information.

An Audio/Video system. Speakers connected to

the video system.

An Audio/Video system set up in one room.

Speakers connected to the audio system.

An Audio/Video system set up in two rooms.

Speakers connected to the audio system or to

both systems.

27

This chapter informs you how to

place, connect and maintain your

music system.

We recommend that you follow this

procedure when you set up your

music system:

1 Place the music system where you

want to use it.

2 Set up your speakers and any

auxiliary equipment.

3 Arrange the cables in the cable

cover grooves and attach the cover

to the rear of the music system.

4 Connect all cables to their sockets

on the rear panel of the music

system remember not to connect

it to the mains yet!

5 Mount the glass doors.

6 Connect the products to the

mains.

Placement, connections and maintenance

How to set up your music system, 28

Placing your music system

Connect the cables, 29

Aerial

Loudspeakers

Auxiliary equipment

BeoLink connection

Mains supply

How to assemble the music system, 30

Arrange the cables

Mount the cable cover

Mount the glass doors

Audio/Video setup, 31

Looking after your music system, 32

Cleaning your BeoSound

Cleaning your CDs

CD memory hard disc

Changing Beo4 batteries

28 Placing your music system

Placing your music system

Make sure that the music system is set up, placed

and connected in accordance with the instructions

in this guide.

Place your music system on a firm surface,

preferably on the table, sideboard or stand where

you want it placed permanently.

The music system is designed for indoor use in dry,

domestic environments only, and for use within a

temperature range of 1040 C (50105 F).

Avoid placing the system in direct sunlight, near

radiators or other sources of heat.

Allow a space of at least 5 cm above and to each

side of the music system for adequate ventilation.

Remember to leave enough space at the sides for

the glass doors to open.

If you want to hang the music system on a wall,

make sure that you use the correct size and type

of screws and wall plugs for mounting the wall

bracket (optional accessory) and the music system.

The type of screws and wall plugs will depend on

the material and construction of the wall.

Do not connect any of the products in your system

to the mains, until after you have connected all

the cables (see the opposite page).

If no permanent FM aerial connection is available,

an indoor aerial may be hooked onto the clamp

on the back of the BeoSound 3200.

29

Use the diagram and the graphics

imprinted on the socket panel for

reference when locating the sockets.

Do not connect the music system to

the mains until you have finished the

setting-up procedure!

You can use your music system in a standalone setup or connected to a Bang & Olufsen video system using the Master Link cable. The Master Link socket on the back of the music system can also be used for BeoLink distribution. The BeoLink system allows you to listen to the music system in any room you like via extra speakers*.

Connect the cables

Aerial Connect your FM aerial to the socket marked FM

and your AM aerial, if any, to the socket marked

AM.

When using an AM loop aerial, tune in to the

radio station you want, then turn the aerial

horisontally until you receive the best possible

signal.

Loudspeakers Connect your active speakers to the sockets

marked POWER LINK.

You may choose to loop the signals through from

speaker to speaker, or you may connect one

speaker to each of the two sockets. Refer to the

Users guide for your BeoLab loudspeakers.

Remember to set the L R LINE switch on the

BeoLab speakers to L and R (left and right),

respectively.

If you wish to connect the BeoLab 2500

loudspeakers, refer to Guides supplied with the

speakers.

Auxiliary equipment Connect your auxiliary equipment to the socket

marked AUX. This socket enables you to use

compatible Bang & Olufsen equipment, such as an

audio tape recorder or a record player. Please note

that equipment connected to this socket cannot

be operated by remote control. The socket may

also accommodate equipment of other makes.

BeoLink connection The socket marked MASTER LINK should be used

when you connect your music system and a

compatible Bang & Olufsen video system.

Mains supply Plug the mains lead into the socket marked ~, on

the music system but do not connect it to the

mains yet.

*NOTE! Please contact a Bang & Olufsen

retailer for further information about the

BeoLink system and information on auxiliary

equipment.

AM aerial FM aerial

Mains supply BeoLink connection

Loudspeakers

Auxiliary equipment

30

When you have finished the setting

up procedure described on the

previous page, you must mount the

glass doors and the cable cover.

How to assemble BeoSound 3200

Arrange the cables Arrange the connector cables in the cable cover as

shown to the right. You can fasten the cables with

tape to keep them in place before you mount the

cable cover to the rear of the music system.

Mount the cable cover Fasten the cover with the cables attached to

the grill on the BeoSound rear panel:

a Insert the bottom row of pegs into the grill.

b Push the top row of pegs into the grill.

c Pull the cable cover upwards until the pegs fit

properly with the grill.

Do not plug in the cables before the cable cover is

mounted.

Mount the glass doors The labels on the back of the glass doors indicate

which end should be pointing upwards, and which

side of the glass door should point towards the

middle of the BeoSound.

> Fasten the two glass doors, one at a time, to the

front of the music system by pressing their

fastening points into the corresponding

fastening sockets on the BeoSound.

> Press gently on each of the fastening points until

you hear a click. The click indicates that the

glass doors are mounted properly.

c

b

a

Treat the glass doors with great care. If they are

cracked or chipped, or damaged in any other way,

they should be replaced immediately, as they could

otherwise cause bodily harm. You can order

replacement doors through a Bang & Olufsen

retailer.

31

You can use your music system as a

stand-alone system or as a Audio/

Video system, if you connect the

systems with a Master Link cable. If

you connect your music system and

your video system, you must make

sure that they are set up to function

together. This means that you have

to make Option programming as

described on this page. You also

choose whether to connect your

loudspeakers to your music system or

your video system.

Your music system is set for Option 1 from the factory and you do not have to make Option programming if you are using your music system on its own.

Refer to the chapter Use an Audio/Video system on page 26 for information on how to operate an Audio/Video system.

Audio/Video setup

Option programming

Option programming is done with the Beo4 remote control and with the entire system switched to standby.

To program Option for your audio system > While holding down the button, press LIST.

> Let go of both buttons.

> Press LIST repeatedly until OPTION? is shown in

the Beo4 display and press GO.

> Press LIST repeatedly until A.OPT is shown in the

Beo4 display and then key in the appropriate

number (0,1, 2, 5 or 6).

Choose V.OPT to program Option for your video

system.

The music system has five different Option settings: Option 0. Used when your music system is

connected to your video system and no speakers

are connected directly to your music system.

Option 1. Used when your music system is set up

on its own or connected to a video system,

when speakers are connected to your music

system.

Option 2. Used when your music system is set up

in one room and connected to a video system

set up in another room.

Option 5. Used when your music system is set up

in a link room which also comprises a Bang &

Olufsen television.

Option 6. Used when your music system is set up

in a link room without a Bang & Olufsen

television.

Option 2 Option 0

An Audio/Video system.

Option 1

A stand-alone setup.

Option 1 Option 1

An Audio/Video system set up in one room.

Option 2 Option 2

An Audio/Video system set up in two rooms.

32

Normal maintenance, such as

cleaning the music system, is the

responsibility of the user. To achieve

the best result, please follow these

instructions.

Before you clean the music system, we recommend that you disconnect it from the mains to prevent the glass doors from opening and closing. While the music system is disconnected, you can open or close the glass doors manually. It requires only a little, gentle force to do so.

Handle CDs with care. If the CD is always held by its edges and placed in its original cassette when out of the CD player, no cleaning will be required.

Should the hard disc break down, all music recorded in the CD memory may be lost and must be recorded again.

When BATTERY appears in the Beo4 display, it is time to change the batteries in the remote control.

Looking after your music system

Cleaning your music system Use a soft, dry cloth to wipe dust off the music

system.

The glass doors can be removed and cleaned on

the inside, if required. To remove the glass doors,

simply grip them tightly, one at a time, while they

are open and gently but firmly unhook them from

their four fastening points, pulling outwards. To

clean the glass doors, we recommend that you use

a mild window cleaner.

Fasten the doors again as described in this guide.

Leave the doors half-way open before

reconnecting the system to the mains.

CD memory hard disc If for example music is lost or noise appears while

playing back music from the CD memory, it is

recommended to have your music system checked

by authorised service personnel. If the hard disc

needs to be replaced, the music stored in the CD

memory will be transferred to a new hard disc if

possible.

Changing the batteries The Beo4 requires three batteries. We recommend

that you use 1.5 volt (size AAA) Alkaline batteries

only. Replace the batteries as shown on this page,

keep a finger on top of the batteries until the lid is

replaced.

When you have replaced the batteries, you must

wait for about 10 seconds until the display reads

TV. The Beo4 remote control is then ready to

operate again.

Do not use alcohol or other solvents to clean any

part of the BeoSound. We do not recommend

using special cleaning CDs in the CD player.

Cleaning your CDs Should the CD become soiled

by fingerprints, dust or dirt, it can be wiped clean

with a lint-free, soft, dry cloth. Avoid extreme heat

and humidity, and never write on your CDs. No

solvents or abrasive cleaners should ever be used

on the CD and always wipe the CD in a straight

line from centre to edge.

1

2

3

1

2

33

Find out how to tune in radio

stations and how to make your

personal preference settings for

sound. Find out how to set the clock

and how to use the PIN code system.

If you want to use the Beo4 remote

control with your music system, this

chapter tells you how to customise

the Beo4 for it. For information

about using Beo4, refer to the

chapter Daily use on page 9.

Tuning and preference settings

Tune and edit radio stations, 34

Tune in radio stations

Move stored radio stations

Delete radio stations

Adjust and store sound, 36

Sound adjustments

Set the built-in clock, 37

Set the clock

Set and enter a PIN code, 38

Enter the PIN code

Activate the PIN code system

Change your PIN code

Deactivate the PIN code system

If you have forgotten your PIN code

Customise Beo4, 40

Configure Beo4

Add an extra button

Move extra buttons

Remove extra buttons

34

Let the music system find the

available radio stations for you, now

store them on program numbers of

your own choice. You can store up

to 60 radio stations and name them

as described on page 20. Once a

station is stored, you access it directly

by keying in the program number or

by stepping though all the stored

stations.

Once you have found a radio station, you can fine tune it, if the reception is poor. You can also key in the exact frequency of a radio station and store it under a chosen program number.

If you wish, you can move or delete tuned radio stations.

A station you have moved to another program number can still be found on the original program number. Any name you have given to a station is lost when you store it on a new program number.

If you move a station to a program number used by another station, this other station is deleted, and must be tuned in and stored on another program number.

Tune and edit radio stations

Tune in radio stations

Press to switch on the radio

Press repeatedly until TUNE ?

appears in the display

Press to access the tuning

function. FM ? appears

Press to switch from FM to AM

or vice versa

Press to select AM or FM.

FM or AM and the current

frequency appears

Press to search for a radio station

up or down the frequency

band, or

Key in the exact frequency

Press to accept.

FINE 0 appears

Press to fine tune, if necessary

Press to accept.

STEREO ? appears

Press to switch from STEREO to

MONO

Press to accept the first

available program number

appears

Press to switch to a different

program number, or

Key in the program number you

want

Press to store the station on the

displayed program number.

STORED appears, indicating that

the station is stored

RADIO

SETUP TUNE ?

GO FM ?

GO FM 88.9

0 9

GO FINE 0

GO STEREO ?

GO P 15 ?

0 9

GO STORED

Move stored radio stations

Press to switch on the radio

Press repeatedly until TUNE ?

appears in the display

Press to tune the station. FM ?

(or AM ?) appears

Press to accept

Press repeatedly until the

program number appears

Key in the number on which you

want to store the station

Press again to store the station.

STORED appears, indicating that

the station is stored on the

chosen number

NOTE! If the stereo signals are not strong

enough to produce acceptable sound, the

music system automatically switches to mono.

You can also select mono manually during

tuning, if necessary.

RADIO

SETUP TUNE ?

GO FM ?

GO

GO P 15 ?

0 9

GO STORED

35

Delete radio stations

Press to switch on the radio

Press one of the number buttons

to select a radio station

Press to delete the radio station

you are listening to. DELETE ?

appears

Press again to delete the station.

DELETED appears, indicating that

the radio station is deleted

RADIO

0 9 RADIO 7

DELETE DELETE ?

DELETE DELETED

36

All sound levels are set to neutral

values from the factory, but you can

make your own sound adjustments

and store them.

You can adjust the volume, bass and

treble levels or alter the balance

between the left and right speakers.

If you store a volume level, your music system will start playing at this level each time you switch it on. The maximum level that can be stored is 60.

The music system also features a loudness function which you can activate or deactivate as you like. The loudness function makes the music more dynamic. It compensates for the human ears lack of sensitivity to high and low frequencies when listening to low music.

If you do not store the sound adjustments you make, the music system will return to the preset sound levels once you switch it off.

Adjust and store sound

Sound adjustments

Press repeatedly until SOUND ?

appears in the display

Press to access the sound

adjustment function. VOL and

the current volume level appears

Press to raise or lower the sound

levels

Press repeatedly to display the

different sound displays, e.g.

BAL > <

Press to adjust balance

Press repeatedly until STORE ?

appears

Press to store the current sound

levels. STORED appears

Adjust volume Press to adjust the volume up or

down

Press to silence the speakers

completely, press again to restore

sound

SETUP SOUND ?

GO VOL 28

GO BAL ><

ss tt

GO STORE ?

GO STORED

MUTE

NOTE! When the BeoSound is used in an

integrated Bang & Olufsen Audio/Video

system, sound must be adjusted as described

in the Guide for the video system. When you

press the SOUND button, the display will read

USE TV.

Volume level Volume can be adjusted in steps of

two within a range of 00 to 72.

Balance setting Balance can be adjusted within a

range of 7 to either side.

Bass level Bass can be adjusted within a range of

5 to +5.

Treble level Treble can be adjusted within a range

of 5 to +5.

Loudness setting Indicates if loudness is switched

on or off

Displays shown during sound adjustment

37

The music system has a built-in clock

with time, date and year. You can

call up the time in the display via the

SETUP button or via the Beo4 remote

control. The clock is not set

automatically, you must enter the

settings yourself.

If you want to make use of the Timer function described on page 24, it is necessary that the built-in clock in the music system is set correctly.

Set the built-in clock

Set the clock

Press repeatedly until CLOCK ?

appears in the display

Press to access the clock

function. The time appears

Press to change to the exact

time, if necessary

Alternatively key in the exact

time

Press to accept. The date appears

Press to change the date, if

necessary

Press to accept. The year appears

Press to change the year, if

necessary

Press to accept. STORE ? appears

Press to store the new setting.

STORED appears

SETUP CLOCK ?

GO 14 : 45

0 9

GO 23 AUG

GO 2002

GO STORE ?

GO STORED

To call up the clock in the display via Beo4 Press repeatedly until CLOCK

appears in the Beo4 display

Press to call up the clock. The

time appears in the display of

the music system

LIST CLOCK

GO 14 : 45

NOTE! When the music system is connected to

a video system with a Master Link cable, the

clock must be set in the video system.

38

You choose whether or not to

activate the PIN code system. The use

of a PIN code means that if your

music system has been disconnected

from the mains for more than

approximately 30 minutes, it can

only be activated again by switching

it on and keying in your own

personal PIN code via the close-up

operation panel.

If the PIN code is not entered, the music system automatically switches to standby after 3 minutes.

If a wrong PIN code is entered, you get five attempts to key in the code, after which the system is switched off and cannot be switched on for 3 hours.

You can change your PIN code, however, for security reasons it is only possible to change the PIN code five times within a period of 3 hours.

Should you forget your PIN code, please contact your Bang & Olufsen retailer who can assist you in receiving a Master code from Bang & Olufsen. You need the Master code to reactivate your music system.

Set and enter a PIN code

Enter the PIN code

The cue PIN _ _ _ _ is displayed

Key in your personal PIN code.

The PIN code is not displayed

When the four-digit code has

been entered, the display returns

to the relevant source e.g.

RADIO 1

When the PIN code system is activated and the

music system has been disconnected from the

mains for more than approximately 30 minutes,

the indicator light will flash to show that the

system must be switched on and the PIN code

entered via the close-up operation panel.

PIN _ _ _ _

0 9 PIN * _ _ _

PIN ****

RADIO 1

Activate the PIN code system

Press twice when the system is in

standby

Press to key in a four-digit PIN

code of your own choice.

NEW PIN appears briefly, and

PIN _ _ _ _ appears

Key in a four-digit PIN code of

your own choice. The PIN code is

not displayed

Press to store the PIN code.

CONFIRM appears briefly, and

PIN _ _ _ _ appears

Re-enter your code.

The PIN code is not displayed

Press to store. STORED appears,

indicating that your PIN code is

stored

ss

STOP NEW PIN

PIN _ _ _ _

0 9 PIN * _ _ _

PIN ****

GO CONFIRM

PIN _ _ _ _

0 9 PIN ****

GO STORED

NOTE! If a wrong code is entered the second

time, the cue ERROR appears in the display,

and you must enter the code again.

39

Change your PIN code

Press twice when the set is in

standby

Press to key in the four-digit PIN

code. PIN _ _ _ _ appears

Key in your personal PIN code.

The PIN code is not displayed.

NEW PIN ? appears

Press to enter a new PIN code.

PIN _ _ _ _ appears

Key in your new PIN code. The

PIN code is not displayed

Press to store. CONFIRM appears

briefly, and PIN _ _ _ _ appears

Re-enter your code.

The PIN code is not displayed

Press to store. STORED appears,

indicating that your changed PIN

code is stored

ss

STOP PIN _ _ _ _

0 9 PIN **** NEW PIN ?

GO PIN _ _ _ _

0 9 PIN ****

GO CONFIRM

PIN _ _ _ _

0 9 PIN ****

GO STORED

Deactivate the PIN code system

Press twice when the set is in

standby

Press to key in the four-digit PIN

code. PIN _ _ _ _ appears

Key in your personal PIN code.

The PIN code is not displayed

NEW PIN ? appears

Press to switch the display to

PIN OFF

Press to deactivate the PIN code

system. DELETED appears,

indicating that the PIN code

system is deactivated

ss

STOP PIN _ _ _ _

0 9 PIN **** NEW PIN ?

PIN OFF

GO DELETED

If you have forgotten your PIN code

The cue PIN _ _ _ _ is displayed

Keep pressed down for 3

seconds to open for master code

input

Key in the five-digit Master code.

DELETED appears, indicating that

the PIN code system is

deactivated and the set is ready

for use

PIN _ _ _ _

ss

0 9 DELETED

40

If you already have a Beo4 remote

control, it is possible to reconfigure it

for use with your music system.

You can also add extra buttons to

Beo4 which can then be called up by

pressing the LIST button. You can

rearrange the order in which the

extra buttons, that you yourself

have added and the ones that were

already present, appear when you

press LIST.

When you add a button, you can choose where to place it in the list of extra buttons in Beo4. Extra buttons can also be deleted again.

Customise Beo4

Configure Beo4

Press and hold the standby

button down

Press to get access to the Beo4

setup function

Now, let go of both buttons.

ADD? appears in the display

Press repeatedly until CONFIG?

appears in the display

Press to be able to select the

type of configuration

Press repeatedly until AUDIO?

appears in the display

Press to get access to the audio

configuration

Press repeatedly until AUDIO1

appears in the display*

Press to store the configuration

STORED appears to indicate that

the configuration has been

stored. You leave the Beo4 setup

function automatically

*If the audio configuration does not contain

AUDIO1, select BASIC instead.

LIST

ADD?

LIST CONFIG?

GO

LIST AUDIO?

GO

LIST AUDIO1

GO

STORED

LIST

ADD?

GO

GO

1 9

ADDED

Add an extra button

Press and hold the standby

button down

Press to get access to the Beo4

setup function

Now, let go of both buttons.

ADD? appears in the display

Press to call up the list of

available buttons to add from.

The first button appears in the

display, it flashes on and off

Press to move forwards or

backwards in the list of all extra

buttons

Press to add and place the

button on its preset position or

as the first button in the list,

or

Press to insert the button at a

specific position in the list

ADDED appears to indicate that

the button has been added,

and you leave the Beo4 setup

function automatically

41

Move extra buttons

Press and hold the standby

button down

Press to get access to the Beo4

setup function

Now, let go of both buttons.

ADD? appears in the display

Press repeatedly until MOVE? is

displayed

Press to call up the list of extra

buttons. The first button

appears in the display

Press to move forwards or

backwards in the list of extra

buttons

Press to move and place the

displayed button as the first in

the list, or

Press to move the button to a

specific position in the list. The

subsequent buttons move

down the list

MOVED appears to indicate that

the button has been moved,

and you leave the Beo4 setup

function automatically

LIST

ADD?

LIST MOVE?

GO

GO

1 9

MOVED

LIST

ADD?

LIST REMOVE?

GO

GO

REMOVED

Remove extra buttons

Press and hold the standby

button down

Press to get access to the Beo4

setup function

Now let go of both buttons.

ADD? appears in the display

Press repeatedly until REMOVE?

is displayed

Press to call up the list of extra

buttons. The first button

appears in the display

Press to move forwards or

backwards in the list of extra

buttons

Press to remove the displayed

button

REMOVED appears to indicate

that the button has been

removed, and you leave the

Beo4 setup function

automatically

GO 3

Add an extra button to Beo4

GO 3

Move extra buttons.

42 Index

Assembly

How to assemble BeoSound 3200, 30

Mount the glass doors, 30

Mount the cable cover, 30

Audio/Video system

Connect your music system to a video system, 29

Option programming, 31

Use an Audio/Video system, 26

Beo4 remote control

Add extra buttons to Beo4, 40

Change Beo4 batteries, 32

Configure Beo4, 40

Move extra buttons, 41

Remove extra, buttons, 41

Use the Beo4 remote control, 13

Cables

Connect the cables, 29

Mount the cable cover, 30

CD player

Delete CD names, 20

Load a CD, 4 Name CDs, 20

Play a CD, 11

Play favourite tracks only, 16

Repeat a CD for up to 12 hours, 17

See list of CD names, 20

CD memory

CD memory groups, 5 Copy CDs into the CD memory, 18

Copy CDs within the CD memory, 22

Copy selected tracks only into the CD memory groups, 19

Delete CDs from the CD memory, 23

Delete tracks from the CD memory, 23

Move CDs in the CD memory, 22 24

Name CD memory groups, 20

Name CDs in the CD memory, 20

Play from the CD memory, 10

Cleaning

Looking after your music system, 32

Handling your CDs, 32

Clock

Enter settings for the built-in clock, 37

Connections

Aerial socket, 29

Socket panel, 29

Connect your music system to a video system, 29

Connect speakers, 29

Connect headphones, 4

Contact

Contact Bang & Olufsen, 44

Copy

Copy from a CD to the CD memory, 18

Copy a CD from one group to another, 22

Delete

Delete CD names, 20

Delete CDs or tracks from the CD memory, 23

Delete radio stations, 35

Delete series of tracks, 16

Displays

Understand and change the displayed information, 7

Glass doors

Mount the glass doors, 30

Groups

CD memory groups, 5 Name CD memory groups, 20

43

Hard disc

CD memory hard disc, 32

Headphones

Connect headphones, 4

Loudspeakers

Connect loudspeakers, 29

Maintenance

Looking after your music system, 32

Master Link

Audio/Video setup, 31

Option programming, 31

Use an Audio/Video system, 26

Naming

Delete CD names, 20

Name a CD, 20

Name a radio station, 20

Name CD memory groups, 20

See list of CD names, 20

Option

Program your music system to the correct Option, 31

PIN-code

Activate the PIN-code system, 38

Change or delete your PIN-code, 39

Did you forget your PIN-code?, 39

Use your PIN-code, 38

Placement

Placing your music system, 28

Settings

Customise Beo4, 40

Set the clock, 37

Sound adjustments, 36

Radio

Delete radio stations, 35

Move radio stations, 34

Name radio stations, 20

Switch on the radio, 12

Tune in radio stations, 34

Random

Play tracks in random order, 17

Repeat

Repeat a CD, 17

Sockets

Overview of sockets, 29

Sound

Adjust or mute the sound volume, 36

Change sound from stereo to mono, 34

Change volume, bass or treble, 36

Timer

Enter settings for the built-in clock, 37

Make your music system start or stop automatically, 24

Make Timer programming via Beo4, 25

Switch on the Timer play function, 24

To view, edit or delete a Timer, 25

Tracks

Copy favourite tracks only, 19

Play favourite tracks only, 16

Play tracks in random order, 17

Tune

Find available radio stations, 34

Tune in radio stations, 34

Name radio stations, 20

Move radio stations, 34

Delete radio stations, 35

44

For your information

Your needs as a user are given careful consideration during the design and development process of a Bang & Olufsen product and we strive to make our products easy and comfortable to operate.

Therefore, we hope that you will take the time to tell us about your experiences with your Bang & Olufsen product. Anything which you consider important positive or negative may help us in our efforts to refine our products.

Thank you!

Write to: Bang & Olufsen a/s

Customer Service

dept. 7210

Peter Bangs Vej 15

DK7600 Struer

or fax: Bang & Olufsen

Customer Service

+45 97 85 39 11 (fax.)

or e-mail: beoinfo1@bang-olufsen.dk

Visit our Web-site on

www.bang-olufsen.com

3508591 0501 Printed in Denmark by Bogtrykkergrden a-s, Struer

Technical specifications, features and the use thereof are subject to change without notice.

45

This product fulfils the conditions stated in the

EEU directives 89/336 and 73/23.

The black and yellow label on the compact disc

player serves as a warning that the apparatus

contains a laser system and is classified as a class 1

laser product. In case any difficulties arise with the

compact disc player, please contact a Bang &

Olufsen retailer. The apparatus must be opened by

qualified service personnel only.

CLASS 1 LASER PRODUCT

CAUTION: The use of any controls, adjustments or

procedures other than those specified herein may

result in hazardous radiation exposure.

Bang & Olufsen cannot be held liable for any loss

of data due to hard disc breakdown.

46

www.bang-olufsen.com

B&O_omslag_202x261.indd 2 02/12/08 11:53:39

Manualsnet FAQs

If you want to find out how the Beosound 3200 Bang Olufsen works, you can view and download the Bang Olufsen Beosound 3200 User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Bang Olufsen Beosound 3200 as well as other Bang Olufsen manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Bang Olufsen Beosound 3200. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Bang Olufsen Beosound 3200 User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Bang Olufsen Beosound 3200 User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Bang Olufsen Beosound 3200 User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Bang Olufsen Beosound 3200 User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Bang Olufsen Beosound 3200 User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.