- Manuals
- Brands
- Bang Olufsen
- Remote
- Beo One
- User's Guide
Bang Olufsen Beo One User's Guide PDF
Summary of Content for Bang Olufsen Beo One User's Guide PDF
BeoRemote One
2
Daily use
Introduction to BeoRemote One and the guide, 3
Using your BeoRemote One, 4
BeoRemote One in detail, 5
Access your favourite content using MyButtons, 7
Make settings for the display, 8
Customise your remote control, 9
Maintenance, 12
Advanced use
Add more products, 13 How to add a product to the BeoRemote One LIST and how to give it a specific Option.
Using BeoRemote One for a Beo4 product, 16 How to use BeoRemote One for operation of a Master Link television or music system which is normally operated with Beo4.
Beo4 and BeoRemote One conversion, 19 Find out which button to use on BeoRemote One, if you are used to Beo4.
BeoRemote One advanced settings, 20 Make advanced settings for your remote control. You can, for example, change the display language or reset your BeoRemote One to factory settings.
BeoLink setup, 22 How to display and listen to sources from another Bang & Olufsen product when your products are connected to the same network.
Contents Click a headline to move to that section
This guide contains additional information about your BeoRemote One and
describes features and functions in detail. Among other things you can
find information about settings.
This guide will be updated on a regular basis to make it reflect, for example,
new features and functions introduced with software updates.
You can find additional information about your product in the Frequently
Asked Questions (FAQ) section on www.bang-olufsen.com/
customerservice.
Version 1.0 1405
3
Introduction to BeoRemote One and the guide
The BeoRemote One is a hand-held remote control which gives easy access to remote operation of your Bang & Olufsen television or music system.
The display on BeoRemote shows you sources or functions, such as TV, RADIO and STAND, or even the lights.
The BeoRemote One remote control incorporates more functions than just the actual buttons. Extra sources are brought up on the BeoRemote One display using the TV and MUSIC button and additional functions can be obtained using the LIST button.
To turn the television on a motorised stand Press to bring up STAND in the BeoRemote One display
Press to turn the television stand
Select a position for the television to turn to
Symbols used in this guide
Remote control operation A dark grey button, such as LIST,
indicates a physical button you must press.
A light grey display text, such as STAND, indicates a BeoRemote One display text. Press LIST, TV or MUSIC on BeoRemote One to bring it up. The text appears in the BeoRemote One display. You can show or hide display texts for LIST, TV and MUSIC and you can also rename texts. For more information see page 9 and page 10.
The centre button is symbolised by which is used in the operation sequences when you must press the centre button.
LIST
STAND
or
0 9
Daily operations are carried out by pressing a single button on BeoRemote One, or by pressing a few buttons in a logical and straightforward sequence.
Example of BeoRemote One operation.
4
Using your BeoRemote One
The BeoRemote One display shows you sources and functions.
The TV button shows a list of TV sources The MUSIC button shows a list of music sources
The LIST button shows a list of functions related to the active source
The three MyButtons are short cuts to the personalisation function
Number buttons
Buttons for functions such as Teletext, Programme Guide and information, and for
menu operation of the selected source
Control buttons for menu operation and for operation of non-Bang & Olufsen products through the Peripheral Unit Controller
Playback buttons and replay
Button for channel and station step Button for volume adjustment. To mute, press in the middle of the button, press again to bring back the sound
Standby button
Display text in focus If the display text fills up more than one line, the text will scroll in from the right in order to display all text when the text is in focus.
Centre button for selection
TV
HOMEMEDIA
5
BeoRemote One remote in detail
Daily and advanced operation with BeoRemote One buttons The buttons on BeoRemote One are conveniently grouped for daily operation.
TV displays available TV sources in the BeoRemote One display for you to switch on. Use or to step in the list and press the centre button to switch on a source.
MUSIC displays available music sources in the BeoRemote One display for you to switch on. Use or to step in the list and press the centre button to switch on a source.
LIST displays extra functions and products in the BeoRemote One display. Use or to step in the list and press the centre button to select an item*1. If you exit LIST and press LIST again within short time, you may need to press LIST one more time to display the top of the menu.
MyButtons a long press stores the current setup, such as source, sound and picture settings. A short press selects it. You can also set up the MyButtons to select a specific source only, see page 7.
Number buttons 0 through to 9 are used whenever you have to enter numbers, for example to select a specific TV channel or radio station.
TEXT gives access to Teletext on your Bang & Olufsen television.
BACK allows you to back up through menus and the BeoRemote One lists. Long press exits all menus and the BeoRemote One lists.
INFO brings up help texts or information for a menu or function for your Bang & Olufsen televisions.
GUIDE brings up the Programme Guide on your Bang & Olufsen television.
MENU brings up the on-screen menus for your Bang & Olufsen televisions.
Note that You can show or hide display texts for the TV, MUSIC and LIST buttons and you can also rename texts. For more information see page 9 and page 10.
1*If you have selected LIGHT or CONTROL in the LIST menu, you must press LIST again to access your LIGHT and CONTROL functions.
TV
HOMEMEDIA
6
, , and arrow buttons left, right, up and down allow you to move in menus and in the BeoRemote One display. Use to return to previous level/item. Use to open a list of Options or make a selection. (Centre button) allows you to select or activate a menu or item.
(Coloured buttons) allow you to select colour specific functions. It will be explained in the guide for your Bang & Olufsen product when and how to use the buttons.
and search backwards or forwards step by step. The buttons have different functions depending on your Bang & Olufsen television or music system. See the guide for your system for more information.
(Play) start playback of a track, file or recording or start replay.
(Pause) pause playback of a programme or recording.
P + /P - allows you to step through TV channels and radio stations.
/ allows you to adjust the volume up and down. To mute, press in the middle of the button, press again to bring back the sound. (Standby) switch your product to standby. Long press switches all products in your system to standby.
7
Access your favourite content using MyButtons
You can personalise your
BeoRemote One, using the three
MyButtons. You can save a
snapshot of a current television
viewing or playback experience to
be able to restore it quickly with just
one touch of a button. For more
information, see the guide for your
television.
You can also dedicate a source to
one of the MyButtons, and use it to
switch on the source directly.
Note that not all products support the MyButton function. For more information, see the guide for your product.
Save and use a snapshot
You can save up to three snapshots which can be activated by the three MyButtons. Your television must be switched on and a source must be selected. A snapshot includes the settings made for the selected source, for example, stand positions and sound adjustment.
To save a snapshot Press and hold one of the MyButtons to save the current viewing or playback experience
If you save a snapshot with a button where a snapshot has already been saved, the existing snapshot will be replaced by the new snapshot.
Use a MyButton for a specific source
You can select a source you want to activate each time you press one of the three MyButtons.
To set up a MyButton for a specific source ... Press to bring up Settings in the BeoRemote One display
Press to bring up Advanced
Press to bring up Buttons
Press to select one of the MyButtons
Press to step in the list of sources*1
Press to store the source you want to activate with the MyButton
To use a snapshot Press the button dedicated for the desired snapshot
If the item saved as a snapshot is no longer available, the snapshot will still be restored, but the item played will follow normal source behaviour for the selected source.
LIST
Settings
Advanced
Buttons
...
1*Select MyButton in top of the list if you want to use the button to save a snapshot, instead. This function is not available when you use BeoRemote One for operation of a Beo4 product.
Use the MyButtons to access your favourite content with one touch of a button.
8
Make settings for the display
You can change the settings for display time out*1 and for display brightness*1 on your BeoRemote One.
Change the display time out Press to bring up Settings in the BeoRemote One display
Press to bring up Display
Press to select Time out
Press to step between the settings for display time out
Press to store the setting
1*Note that the longer the display is lit and the brighter the display, the more often the batteries need to be changed.
Set the display brightness Press to bring up Settings in the BeoRemote One display
Press to bring up Display
Press to bring up Brightness
Press to step between the settings for display brightness
Press to store the setting
BeoRemote One display settings
LIST
Settings
Display
Time out
...
LIST
Settings
Display
Brightness
...
From the factory the display time out is 10 seconds.
10 seconds
5 seconds
15 seconds
Medium
Low
High
From the factory the display brightness is Medium.
9
Customise your remote control
Show/hide sources or functions The BeoRemote One distinguishes
between two main types of sources
for the product you operate. The TV
button allows you to access TV
sources and the MUSIC button
allows you to access music sources.
If your products are connected in a
BeoLink setup, you can also access
linked sources (marked with a link
symbol ), if available. For more
information about linked sources,
see pages 2224.
The sources available depend on your product and your setup. The LIST button relates to the source you have selected.
You can press the LIST button to bring up extra functions in the display to help you operate the active source, just as if you were bringing up extra buttons.
You can customise a BeoRemote One to suit your product. You can show/hide and rename sources or functions for the TV, MUSIC and the LIST buttons related to each main source and change the order in which sources and extra functions appear when you bring them up.
You can show or hide sources to be listed when pressing the TV button and MUSIC button for the product you operate. You can also show or hide functions for the LIST button related to TV and MUSIC sources.
Note that, if all sources are hidden, no sources are available when pressing the TV or MUSIC button.
To show/hide sources or functions for the TV, MUSIC or LIST buttons ... Press to bring up Settings in the BeoRemote One display
Press to select the list you want to edit, TV sources, MUSIC sources, LIST for TV or LIST for MUSIC
Press to select Show
Press to select the source or function to show or hide
Press to switch between show or hide (no selection)
Continue with the next source or function to show or hide. Or ...
press to back up through previous menus, or press and hold to exit the menu completely
LIST
Settings
...
Show
...
...
BACK
TV
HOMEMEDIA
You can add one or more items to be shown in the BeoRemote One lists.
10
>> Customise your remote control
Rename sources or functions
You can rename the sources to be shown when pressing the TV button and MUSIC button. You can also rename functions for the LIST button dedicated to each source, LIST for MUSIC and LIST for TV. Note, however, that you cannot rename the Settings menu.
To rename a source or function*1 for the TV, MUSIC and LIST buttons ... Press to bring up Settings in the BeoRemote One display
Press to access the list of sources or functions to rename, TV sources, MUSIC sources, LIST for TV or LIST for MUSIC
Press to bring up Rename
Press to select the source or function*1 to rename*2, such as WEBMEDIA
Press to step between characters*3 and the icons at the end of spelling line*4. Or,
press to step in the predefined list of names
Press to select a character, number*5 or symbol*4 or a name from the predefined list
Press to delete*4 the last character, number or symbol or press and hold to remove all text
Press to find the store icon to store the name
1*If you want to rename a product instead, press LIST to bring up Settings. Select Advanced and bring up Products. Follow instructions to rename your product. 2*When you rename a source in BeoRemote One, it may be a good idea to rename the source in the television or music system as well, if possible. 3*You can only use latin characters for naming sources or functions. If a character contains special symbols, you can press MENU while the character is highlighted to access a list of special characters to select.
4*Use the icons at the end of the spelling line to switch between upper case/lower case
, to access numbers , symbols , delete and store . 5*You can also enter numbers using the BeoRemote One number buttons 0 to 9.
LIST
Settings
...
Rename
...
BACK
AirPort Express AppleTV
11
>> Customise your remote control
Move sources or functions
You can change the order in which the listed sources appear when pressing the TV button and MUSIC button for the product you operate. You can also move functions for the LIST button dedicated to each source, LIST for MUSIC and LIST for TV. Note, however, that you cannot move the Settings menu, which is always placed at the bottom of the list.
To move a source or function*1 for the TV, MUSIC and LIST buttons ... Press to bring up Settings in the BeoRemote One display
Press to access the list of sources or functions to move, TV sources, MUSIC sources, LIST for TV or LIST for MUSIC
Press to bring up Move
Press to select the source*1 or function to move, such as WEBMEDIA
Press to move the list behind the selected item
Press to place the item in the list
Continue with the next source or function to move. Or ...
press to back up through previous menus, or press and hold to exit the menu completely
Move the list behind the selected item , and use the centre button to place the item in the list. 1* If you want to move a product instead, press LIST to bring up Settings. Select Advanced and bring up Products. Follow instructions to move your product. Note, however, that the active product is always placed in top of the LIST.
LIST
Settings
...
Move
...
...
BACK
TV TV
HOMEMEDIA
12
Maintenance
Wipe the BeoRemote One remote control with a soft, lint-free, wet cloth which is wrung firmly.
Note! Never use alcohol or other solvents to clean any part of the remote control!
Cleaning BeoRemote One
Changing the batteries of BeoRemote One
When the battery warning appears in the BeoRemote One display, it is time to change the batteries in the remote control.
The BeoRemote One requires two batteries. We recommend that you use 1.5 volt (size AAA) batteries only.
Replace the batteries as shown in the Quick guide enclosed with your BeoRemote One or www.bang-olufsen.dk/support/ beo-remoteone.pdf .
When the battery warning appears in the display you cannot use the display related functions until you have changed the batteries.
13
Add more products
From the factory BeoRemote One is
set up for use with a television
(BeoVision) only.
If you want to use BeoRemote One
with a new type of Bang & Olufsen
product or if you want to use the
same BeoRemote One to operate
more than one product, the product
must be shown in the
BeoRemote One LIST for you to
select it.
The products you operate with
BeoRemote One are divided into
three types:
Televisions (default BeoVision):
8 different product Options
Music systems
(default BeoSound):
8 different product Options
Beo4 products*1 (default
Beo4 VIDEO, Beo4 AUDIO etc.):
4 different product Options
The Option settings allow your BeoRemote One to operate your products individually. If, for example, you have two televisions in the same room and commands from your BeoRemote One can be received by both, you must set up each of the televisions as an individual product, and set it to the correct Option.
The settings you make for your BeoRemote One are saved for the active product. To find out how to switch to another product, see page 15.
Note! If a Network Link product is intended for operation with Beo4, you must set it up as a Beo4 product instead. For more information, see pages 1618.
Step 1 Add or remove a product in the LIST
In order for BeoRemote One to operate a new product, you must first add the product to the BeoRemote One LIST for you to select it.
Then you must set up the product to a specific Option in the Product Option menu for BeoRemote One to recognise it as an individual product, see page 14.
To add or remove a product found via the LIST button ... Press to bring up Settings in the BeoRemote One display
Press to bring up Advanced
Press to select Products
Press to select Show
Press to select the product to show or hide, such as BeoVision(2)
Press to switch between show or hide (no selection)
Continue with the next product to show or hide. Or ...
press to back up through previous menus, or press and hold to exit the menu completely
When you have added a product to the LIST, you always find the active product in the top when you press LIST. 1* For information about how to use and operate a Beo4 product with BeoRemote One, see pages 1618. Note that you can rename a product or change the order in which it appears when you bring it up via the LIST button. This is done in the same way as sources or functions are renamed or moved for the TV, MUSIC and LIST buttons, see page 10 and page 11.
LIST
Settings
Advanced
Products
Show
...
...
BACK
Active product
Mute
BeoVision
Stand
14
>> Add more products
Step 2 Set up your product to the correct Option
If you use BeoRemote One for a new product or for two or more products of the same type, for example, two televisions and commands from BeoRemote One can be received by both products, BeoRemote One must be able to recognise your products individually. Therefore, you must set up your product to one of the different product Options using the Product Option menu.
Depending on your setup, you can select whether or not you want the product to react to commands from your BeoRemote One.
For information about which Option to use, see the guide for your television or music system.
Note! If a Network Link product is intended for operation with Beo4, you must set it up as a Beo4 product instead. For more information, see pages 1618.
To give your product a specific Option using BeoRemote One Point your remote control at the IR-receiver of the product you want to Option programme. The distance between the remote control and the IR-receiver must be maximum 0.5 metres.
Press to bring up Settings in the BeoRemote One display
Press to bring up Advanced
Press to bring up Product Option
Select if you want the product to be IR responsive or IR blind*1
Select the active product, such as BeoVision
Select a product Option*2 for your product, such as BeoSound
Select Send and press the centre button to store the selected Option
LIST
Settings
Advanced
Product
Option
...
...
...
Send
1* Select IR responsive when you want your product to react to commands from your BeoRemote One and IR blind when you do not want your product to react to remote control commands. 2* In order to show the product Option, such as BeoSound, in the BeoRemote One display when you press LIST, you must add it to the BeoRemote One LIST, see page 13.
15
>> Add more products
Switch between products using BeoRemote One
Normally, you can activate a source, such as TV, by pressing TV or MUSIC and finding the relevant source on your remote control. However, when you have more products, you must select the product before you can operate its sources. You switch between the products via LIST.
To switch between products Press to bring up the current product, such as BeoVision, in the BeoRemote One LIST
Select the desired product*1, for example, BeoVision(2) for a Network Link television, or Beo4 AUDIO for a Beo4 music system
Press and select a source, such as YOUTUBE
1*To bring up your product, such as BeoVision(2) in the BeoRemote One display, you must first add it to the BeoRemote One LIST, see page 13.
LIST
...
...
TV
...
LIST
BeoVision(2)
BeoVision
TV
LIST
BeoVision
BeoVision(2)
TV
LIST
Beo4 AUDIO
BeoVision
TV
LIST
BeoVision
Beo4 AUDIO
MUSIC
Example of remote control operation when you switch between a television with Network Link and a music system with Master Link.
Example of remote control operation when you switch from one television with Network Link to another.
16
Using BeoRemote One for a Beo4 product
You can use BeoRemote One for
operation of a Master Link television
or music system, which is normally
operated with Beo4. The product
must be shown in the
BeoRemote One LIST, to select it.
When a Beo4 product is selected,
the BeoRemote One LIST contains
the same functions as you find in
the Beo4 LIST. However, you cannot
select sources via LIST. To find out
how to use BeoRemote One if you
normally use Beo4, see page 19.
In order to operate your Beo4 product with BeoRemote One, you must set it to the correct Option, see page 17.
When you use BeoRemote One to operate a Beo4 product, the three MyButtons are dedicated to the buttons corresponding to the DTV, DVD and CD buttons on Beo4. You can change this at any time and dedicate the three MyButtons to activate another source directly, see page 18. However, when you use BeoRemote One for operation of a Beo4 product, you cannot use the MyButtons to save a snapshot of a current viewing or playback experience.
You can also activate a specific source when you press the TV and MUSIC button, when BeoRemote One is used for operation of a Beo4 product, see page 18.
For information about how to switch from a Beo4 product to another type of product, see page 15.
Step 1 Add or remove a Beo4 product in the LIST
When you want to use BeoRemote One to operate a Beo4 product, you must first add the product to the BeoRemote One LIST.
Then you must set up the product to the correct Option, see page 17.
Note that you can also rename a product or change the order in which it appears when you bring it up via the LIST button. This is done in the same way as sources or functions are renamed or moved for the TV, MUSIC and LIST buttons, see page 10 and page 11.
To add or remove a Beo4 product found via the LIST button ... Press to bring up Settings in the BeoRemote One display
Press to bring up Advanced
Press to select Products
Press to bring up Show
Press to select the Beo4 product to show or hide. Options are: Beo4 AUDIO, Beo4 VIDEO, Beo4 AV or Beo4 LINK
Press to switch between show or hide (no selection)
Continue with the next product to show or hide. Or ...
press to back up through previous menus, or press and hold to exit the menu completely
Select one of the four Beo4 products, Beo4 VIDEO, Beo4 AV, Beo4 AUDIO, or Beo4 LINK:
Beo4 VIDEO is used for a Beo4 television in Option 1 or 5.
Beo4 AV is used for a Beo4 television in Option 2 or 6.
Beo4 AUDIO is used for a Beo4 music system in Option 1, 2, 5 or 6.
Beo4 LINK is used for the second Beo4 product, when two televisions or music systems are placed in the same room.
Note! If a Network Link product is intended for operation with Beo4, you must set it up as a Beo4 product instead.
LIST
Settings
Advanced
Products
Show
...
...
BACK
Beo4 AV
Beo4 VIDEO
Beo4 AUDIO
17
>> Using BeoRemote One for a Beo4 product
When you use BeoRemote One for a Beo4 product, the Product Option menu is adapted to match the Option settings available with your Beo4 remote control.
To Option programme a Beo4 product using BeoRemote One Point your remote control at the IR-receiver of the product you want to Option programme. The distance between the remote control and the IR-receiver must be maximum 0.5 metres.
Press to bring up the current product, such as BeoVision, in the BeoRemote One LIST
Select the product*1 that you want to Option programme, such as Beo4 LINK
Press to bring up Settings
Press to bring up Advanced
Press to bring up Product Option
Select the appropriate Option: V.OPT., A.OPT. or L.OPT.
Enter the appropriate number (0, 1, 2, 4, 5 or 6)
Step 2 Set up your Beo4 product to the correct Option
LIST
...
...
LIST
Settings
Advanced
Product
Option
...
0 6
A.OPT.
V.OPT.
L.OPT.
Select one of the three Beo4 Options, V.OPT., A.OPT. or L.OPT.. For information about which Option to use, see the guide for your television or music system.
18
>> Using BeoRemote One for a Beo4 product
When you use BeoRemote One to operate a Beo4 product, the three MyButtons are dedicated to the buttons corresponding to the DTV, DVD and CD buttons on Beo4. You can change this at any time and select which source you want to activate each time you press one of the three MyButtons.
You can also dedicate a source to the TV or MUSIC button and use each button to activate a TV or MUSIC source directly.
Note that you cannot use the MyButtons to save a snapshot of a current television viewing or playback experience when you use BeoRemote One for operation of a Beo4 product.
To set up the MyButtons and the TV or MUSIC button for activating a specific source ... Press to bring up Settings in the BeoRemote One display
Press to bring up Advanced
Press to bring up Buttons
Select between the three MyButtons, the TV or MUSIC button
Press to step in the list of sources*1
Press to store the source you want to activate with the selected button
Set up the MyButtons and the TV or MUSIC button for a specific source
LIST
Settings
Advanced
Buttons
...
...
Set up the MyButtons and the TV and MUSIC button to activate a source directly.
1*When you have selected the TV or MUSIC button, you can choose None if you do not want the TV or MUSIC button to activate a specific source.
19
Beo4 and BeoRemote One conversion
If you are used to operate your product with Beo4, below conversion helps you find out which button to use on
your BeoRemote One when you operate a Beo4 product. BeoRemote One buttons are marked with blue. The
buttons which have exactly the same function on Beo4 and BeoRemote One are light grey.
TV LIGHT RADIO
DTV DVD CD
V.MEM TEXT A.MEM
7 8 9
4 5 6
LIST 0 MENU
1 2 3
STOP PLAY
BACK
TV: use the TV button on BeoRemote One. This also displays a list of TV sources
V.MEM: Press TV to bring up TV sources and find V.MEM in the BeoRemote One
display
A.MEM: Press MUSIC to bring up music sources and find A.MEM in the
BeoRemote One display
LIGHT: press LIST and find LIGHT in the BeoRemote One LIST.
RADIO: use the MUSIC button on BeoRemote One. This also displays a list of music sources.
DTV, DVD, and CD: use the MyButtons*1 on BeoRemote One. DTV: , DVD: and CD:
1*You can change this at any time and dedicate the three MyButtons to activate another source directly, see page 18.
LIST: press LIST on BeoRemote One. The LIST contains the same functions as
Beo4. Note that you cannot select sources via LIST, use the TV and MUSIC buttons
instead.
Navigation button: use the arrow buttons , , and on BeoRemote One.
Search backwards or forwards: use and
on BeoRemote One.
and : use P + /P - on BeoRemote One.
STOP: press (Pause) on BeoRemote One.
PLAY: use (Play) on BeoRemote One.
Note! The INFO and GUIDE buttons have no function when you operate a Beo4 product with BeoRemote One.
TV
HOMEMEDIA
20
You can change the display language of your BeoRemote One at any time. Once a language is chosen, all menus and display messages are shown in this language.
Note however, that to rename sources or functions, you can only use latin characters.
If by accident, you have chosen a language you do not want, you can enter the language menu by pressing LIST, then press the arrow button up one step and press the centre button. Repeat the procedure twice.
Set the language of your BeoRemote One You have access to make more
advanced settings of your
BeoRemote One from the
Advanced menu. You can, for
example, change the display
language and you can reset your
BeoRemote One to factory settings.
You can also,set the IR strength if
you use BeoRemote One to operate
more than one Beo4 product.
If you use your BeoRemote One for operation of lights, curtains or blinds you can make settings for this in the LIGHT and CONTROL menus. This may require a supported Home Automation System. Contact your Bang & Olufsen retailer for more information.
BeoRemote One advanced settings
You can reset your BeoRemote One to factory settings.
To reset your BeoRemote One ... Press to bring up Settings in the BeoRemote One display
Press to bring up Advanced
Press to bring up Factory reset
You will be asked to confirm the reset. Press to confirm the reset or,
press and hold to exit the menu without resetting
Reset your BeoRemote One
To set the language of BeoRemote One ... Press to bring up Settings in the BeoRemote One display
Press to bring up Advanced
Press to bring up Language
Press to step between languages
Press to select the language you want to use
LIST
Settings
Advanced
Language
...
LIST
Settings
Advanced
Factory
reset
BACK
To confirm the reset press the centre button or press BACK to cancel.
Note! When you reset all settings you have made for your BeoRemote One will be deleted.
All settings will be lost. Please
confirm or cancel.
21
>> BeoRemote One advanced settings
You can set up the IR strength of your BeoRemote One. If, for example, you use BeoRemote One for several Beo4 products and they are placed in close proximity, you can reduce the IR strength of the remote control.
To set the IR strength of BeoRemote One ... Press to bring up Settings in the BeoRemote One display
Press to bring up Advanced
Press to bring up IR strength
Press to step between the settings for IR strength
Press to store the setting
Set the IR strength of BeoRemote One
LIST
Settings
Advanced
IR strength
...
22
A TV with Network Link and a music system with Master Link in the same or separate rooms
Example of how to listen to a TV source from BeoVision*4 ... Press to bring up the current product, such as BeoVision, in the BeoRemote One LIST
Select the desired product, for example, Beo4 AUDIO*2
Press TV and select the source you want to borrow from BeoVision, such as YOUTUBE*3
To show/hide sources in BeoVision using BeoRemote One ... > The television is set up as BeoVision from
the factory and BeoVision is selected in the BeoRemote One LIST.
> Show or hide sources*1 of the television via the BeoRemote One LIST, see page 9.
> Show or hide linked sources, such as CD via the BeoRemote One LIST, see
page 9.
To Show/hide sources in Beo4 AUDIO ... > Select Beo4 AUDIO*2 in the
BeoRemote One LIST. > Show or hide sources of the music
system via the BeoRemote One LIST, see page 9.
> Show sources you can borrow from BeoVision, such as YOUTUBE*3 via the BeoRemote One LIST or hide sources, you do not need, see page 9.
BeoLink setup
When you use BeoRemote One for operation of more products and the products are connected to the same
network, you can access sound from sources of the other products in the network. The products can be placed in
the same or separate rooms. For more information about how to connect and set up your product, see the guide
for your television or music system.
BLC
LIST
BeoVision
BEO4
AUDIO
TV
YOUTUBE
In this setup, the Network Link TV is BeoVision per default and the Master Link music system must be set up as Beo4 AUDIO. For information about how to set up your product, see page 13 and page 16.
You have a list of TV and MUSIC sources for each product type: BeoVision and Beo4 AUDIO.
1*Note that available TV sources are shown in the SOURCE LIST menu of your television. 2*In this example BEO AUDIO is already added to the BeoRemote One LIST and the music system is set up as Beo4 AUDIO. 3*If the relevant source, such as YOUTUBE is not available in the BeoRemote One LIST, contact your retailer. 4*With Network Link you can access sound from sources of other products in the network. If you connect your television to a Master Link product, you must also use a BeoLink Converter NL/ML (BLC) to obtain the benefits of Network Link.
TV
YOUTUBE
HDMI 1
A.MEM
RADIO
CD
TV
YOUTUBE
V.MEM
A.MEM
RADIO
CD
Access linked sources
from Beo4 AUDIO
Access sources from BeoVision
Default product:
BeoVision
Product Option:
Beo4 AUDIO
23
Two TVs with Network Link in separate rooms
To show/hide sources of both TVs using BeoRemote One ... > Both televisions are set up as BeoVision
from the factory and BeoVision is selected in the BeoRemote One LIST.
> Show or hide sources*1 of both televisions via the BeoRemote One LIST, see page 9.
> Show or hide linked sources, such as HDMI 1 of both televisions via the
BeoRemote One LIST, see page 9.
Example of how to listen to a linked TV source*2 ... Press TV and select a linked source, such as HDMI 1
1*Note that available TV sources are shown in the SOURCE LIST menu of your television. 2* With Network Link you can access sound from sources of other products in the network.
Note! If a Network Link product is intended for operation with Beo4, you must set it up as a Beo4 product instead. For more information, see pages 1618.
>> BeoLink setup
BeoVision BeoVision
TV
HDMI 1
Access linked sources
Access linked sources
In this setup, both Network Link TVs are BeoVision per default.
You have the same list of TV and MUSIC sources for both televisions. In the example only the TV sources are shown.
Default product:
TV
YOUTUBE
HDMI 1
Default product:
TV
YOUTUBE
HDMI 1
24
Two TVs with Network Link in the same room (with one BeoRemote One)
>> BeoLink setup
To show/hide sources of both TVs using BeoRemote One ... > Select BeoVision or BeoVision(2)*1 in the
BeoRemote One LIST. > Show or hide sources*2 of both
televisions via the BeoRemote One LIST, see page 9.
> Show or hide linked sources, such as HDMI 1 of both televisions via the
BeoRemote One LIST, see page 9.
Example of how to listen to a linked TV source*3 ... Press to bring up the current product, such as BeoVision, in the BeoRemote One LIST
Select the desired product, for example, BeoVision(2)*1
Press TV and select a linked source, such as HDMI 1
BeoVision BeoVision(2)
LIST
BeoVision
BeoVision(2)
TV
HDMI 1
In this setup, one Network Link TV is BeoVision per default and the other is set up as BeoVision(2). For information about how to set up your product, see page 13.
You have the same list of TV and MUSIC sources for both products BeoVision and BeoVision(2).
1*In this example BeoVision(2) is already added to the BeoRemote One LIST and the TV is set up as BeoVision(2). 2*Note that available TV sources are shown in the SOURCE LIST menu of your television. 3* With Network Link you can access sound from sources of other products in the network.
Note! If a Network Link product is intended for operation with Beo4, you must set it up as a Beo4 product instead. For more information, see pages 1618.
TV
YOUTUBE
HDMI 1
NET RADI
Related manuals for Bang Olufsen Beo One User's Guide
Manualsnet FAQs
If you want to find out how the Beo One Bang Olufsen works, you can view and download the Bang Olufsen Beo One User's Guide on the Manualsnet website.
Yes, we have the User's Guide for Bang Olufsen Beo One as well as other Bang Olufsen manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The User's Guide should include all the details that are needed to use a Bang Olufsen Beo One. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Bang Olufsen Beo One User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Bang Olufsen Beo One User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Bang Olufsen Beo One User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Bang Olufsen Beo One User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Bang Olufsen Beo One User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.