Balboa Slimline Air Control 10-2510 v2 Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Balboa Slimline Air Control 10-2510 v2 Instruction Manual PDF

40725 Rev A July 30, 2009

SLIMLINE AIR CONTROLS 10-2310-(-) & 10-2510-(-)

Material White ABS/grey ABS

Dimensions Hole size Socket size 10-2510-(-): 1 1/16 20 mm 10-2310-(-) 1 11/16 32 mm

Important Follow the directions for installation and connection. We reserve the right to change the product and the manual with- out notice.

Installation 1. Before drilling a hole for air control, maker sure the surface is flat, so the Slimline air control will have the best

surface to seal against.

2. Drill a hole according to recommended hole size.

3. Align window on handle/stem assembly (5) with the MIN position. Place the palm of the hand against the top of the Slimline air control handle and press down firmly, rotating the handle counter clockwise about a quarter turn.

4. Grasp the outer edges of the handle with your fingertips and pull the handle from the outer body (3). Remove check valve ball (4) from outer body (3).

5. Place silicone on backside of flange of outer body (3) and install through hole in tub/spa.

6. Place gasket (2) onto body of the outside of tub/spa wall.

7. Hand tighten nut (1) onto body.

8. Glue 20/32 mm hose in socket of air control.

Important: Make sure check valve ball (4) was removed to avoid excess glue from interfering with check valve operations.

9. Remove excess silicone from around flange of air control and surface of tub/spa.

10. Once glue is dry reinstall check valve ball (4).

11. Insert handle/stem assembly (5) into outer body (3) with the window on the handle in the MAX position.

12. Once the handle/stem assembly (5) is in the outer body (3), press on the top surface of the handle firmly and rotate the handle clockwise until it stops (approx turn).

13. Check the MAX and MIN position through the window on the top of the handle and match with the operation of the jets. If aeration occurs in the MIN position, the Slimline air control has been improperly assembled. To correct, press down firmly on the handle and rotate again clockwise. Recheck the MAX and MIN position with the operation of the jets.

Warning Do not use any type of petroleum based lubricant, they will damage the product.

49-10-2310CEC ITT HydroAir, February 2006

1.

2.

3.

4.

5.

1.

2.

3.

4.

5.

RGLAGES DADMISSION D'AIR SLIMLINE 10-2310-(-) & 10-2510-(-)

Matriaux ABS blanc/ABS gris

Dimensions Diamtres de perage conseills Taille de l'adaptateur 10-2510-(-) : 1 1/16 20 mm 10-2310-(-) : 1 11/16 32 mm

Important Veuillez suivre le mode d'emploi pour le montage et les branchements. Nous nous rservons tout droit de modifica- tion sans pravis.

Installation 1 Avant de percer un trou pour la rgulation d'air, assurez-vous que la surface est plane, afin

de faciliter l'obtention d'une surface d'tanchit optimale.

2. Percez un trou conformment au diamtre recommand.

3. Alignez la fentre de l'ensemble poigne/tige (5) sur la position MIN. Placez la paume de la main contre le dessus de la poigne de la rgulation d'air Slimline et appuyez fermement en faisant tourner la poigne d'un quart de tour environ dans le sens antihoraire.

4. Saisissez les bords extrieurs de la poigne avec le bout des doigts et dgagez-la du corps extrieur (3). Otez la bille du clapet anti-retour (4) du corps extrieur (3).

5. Appliquez de la silicone au dos de la bride du corps extrieur (3) et installez le rglage dans la baignoire/le spa via le trou.

6. Placez le joint d'tanchit (2) sur le corps l'extrieur de la paroi de la baignoire/du spa.

7. Serrez l'crou (1) la main sur le corps.

8. Collez un tuyau de 20/32 mm dans l'adaptateur de la rgulation d'air.

Important : assurez-vous que la bille du clapet anti-retour (4) a t te pour viter que l'excdent de colle altre le bon fonctionnement du clapet anti-retour.

9. Otez l'excdent de silicone autour de la bride de la rgulation d'air et sur la surface de la baignoire/du spa.

10. Une fois la colle sche, rinstallez la bille du clapet anti-retour (4).

Insrez l'ensemble poigne/tige (5) dans le corps extrieur (3) avec la fentre de la poigne en position "MAX".

11. Une fois cette opration effectue, appuyez fermement sur le dessus de la poigne et faites- la tourner dans le sens horaire jusqu' la bute (env. de tour).

Vrifiez les positions MAX et MIN par la fentre au-dessus de la poigne et faites-les correspon- dre avec le fonctionnement des jets. En cas d'aration dans la position MIN, la rgulation d'air Slimline a t mal assemble. Pour rsoudre ce problme, appuyez fermement sur la poigne et faites-la tourner de nouveau dans le sens horaire. Revrifiez les positions MAX et MIN par rap- port au fonctionnement des jets.

Avertissement N'utilisez aucun type de lubrifiant base de ptrole, faute de quoi vous risquez d'endommager le produit.

49-10-2310CEC ITT HydroAir, fvrier 2006

Manualsnet FAQs

If you want to find out how the Slimline Air Control 10-2310 Balboa works, you can view and download the Balboa Slimline Air Control 10-2510 v2 Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Balboa Slimline Air Control 10-2310 as well as other Balboa manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Balboa Slimline Air Control 10-2310. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Balboa Slimline Air Control 10-2510 v2 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Balboa Slimline Air Control 10-2510 v2 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Balboa Slimline Air Control 10-2510 v2 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Balboa Slimline Air Control 10-2510 v2 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Balboa Slimline Air Control 10-2510 v2 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.