Balboa Slimline Air Control 10-2510 Instruction Manual PDF

1 of 1
1 of 1

Summary of Content for Balboa Slimline Air Control 10-2510 Instruction Manual PDF

1/2 SLIMLINE AIR CONTROL INSTRUCTIONS 10-2510 & 10-2510 H

The correct hole size for the 1/2 Slimline Air Control is 1-1/8.

1. Before drilling a hole for air control make sure surface is at, so the air body (#3) will have the best surface to seal against.

2. Drill a 1 1/8 hole.

3. Align window on the handle (#7) with the MIN position. Place the palm of the hand against the top of the Slimline Air Control handle (#7), and press down rmly, rotating the handle counterclockwise about a quarter turn.

4. Grasp the outer edges of the handle with your ngertips and pull the handle from the outer body (#3). Remove check valve ball (#4) from outer body (#3).

5. Place silicone on backside of ange of outer body (#3) and install through hole in spa/bathtub.

6. Place gasket (#2) onto body on the outside of spa wall.

7. Hand tighten nut (# 1) onto body.

8. Glue 1/2 pipe in socket of air control.

IMPORTANT: MAKE SURE CHECK VALVE BALL (#4) WAS REMOVED TO AVOID EXCESS GLUE FROM INTERFERING WITH CHECK VALVE OPERATION.

9. Remove excess silicone from around ange of air control and surface of spa/bathtub.

10. Once glue is dry reinstall check valve ball (#4).

11. Make sure handle/stem assembly (#8) is in the fully closed position by aligning the window on the inner body (#5) and making sure the foam is not showing. Insert handle/stem assembly (#8) into outer body (#3) with the window on the handle (#7) in the MAX position.

12. Once the handle/stem assembly (#8) is in the outer body (# 3), press on the top surface of the handle (#7) rmly and rotate the handle clockwise until it stops (approx. 1/4 turn).

13. Check the MAX and MIN position through the window on the top of the handle, and match with the operation of the jets. If aeration occurs in the MIN position, the Slimline Air Control has been improperly assembled. To correct, press down rmly on the handle and rotate again clockwise. Recheck the MAX/MIN position with the operation of the jets.

**DO NOT USE ANY TYPE OF PETROLEUM BASED LUBRICANTS ... THEY WILL DAMAGE THE PRODUCT.

# 1 30-2205 NUT # 2 30-2204AA GASKET # 3 30-2516 SLIMLINE OUTER BODY # 4 30-2515S SLIMLINE CHECK VALVE BALL

# 5 30-2513 SLIMLINE INNER BODY # 6 30-2514 SEAL # 7 30-2511 SLIMLINE HANDLE W/ROTOR # 8 30-251

Manualsnet FAQs

If you want to find out how the Slimline Air Control 10-2310 Balboa works, you can view and download the Balboa Slimline Air Control 10-2510 Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Balboa Slimline Air Control 10-2310 as well as other Balboa manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Balboa Slimline Air Control 10-2310. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Balboa Slimline Air Control 10-2510 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Balboa Slimline Air Control 10-2510 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Balboa Slimline Air Control 10-2510 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Balboa Slimline Air Control 10-2510 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Balboa Slimline Air Control 10-2510 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.