Balboa Magna'flow Manifold Jet Instruction Manual PDF

1 of 1
1 of 1

Summary of Content for Balboa Magna'flow Manifold Jet Instruction Manual PDF

MAGNAFLOW MANIFOLD JET INSTRUCTIONS

The correct hole size for the Magnaow Manifold jet is 2 5/8.

Before drilling the hole(s) to install the jet(s), make sure mounting surface is at. This will help assure the best seal. 1. Drill one 2 5/8 hole for each jet. 2. The gasket (#2) can be placed on the inside or outside surface. Make sure surface is smooth enough to seal. 3. Before inserting the wall tting (#3) thru the hole, apply silicone to threaded area of wall tting only. This will help 4. seal the wall tting (#3) and jet (#1) together. Tighten wall tting (#3) into jet (#1) hand tight (10 FOOT POUNDS MAX ALLOWED) with gasket (#2) in place. The 5. gasket (#2) and silicone will create a good seal.

After the jets are installed on spa, connect the plumbing. Be sure air line is connected to barb and water line is 6. placed in socket. Use care when applying cement inside slip socket of the jets. If too much cement is used, it may be pushed up inside jet housing causing poor jet performance. Be sure air lines do not sag. If air lines sag, the jets may not aerate properly. 7. Run spa for fteen minutes to clear debris from water lines, then thread nozzle assembly (#4) into place using a 8. 9/16 nut driver. Make sure nozzle assembly is threaded snugly into place. Slip adjustment handle (#5) through wall tting (#3) lining up ribs on side of nozzle assembly (#4) with cut-outs at 9. base of adjustment handle (#5). Press adjustment handle (#5) rmly into place. Clips must snap into place. Insert therapy option into adjustment handle (#5). Pressing rmly to snap into place. To remove, pull on snout of 10. eyeball (or owpath spout). Note: It may be easier to remove therapy option with pump running. Block outlet with index nger and pull on snout of eyeball or owpath spout. Rotate adjustment handle (#5) 9011. to control ow of water.

CAUTION: DO NOT APPLY

Manualsnet FAQs

If you want to find out how the Slimline Air Control 10-2310 Balboa works, you can view and download the Balboa Magna'flow Manifold Jet Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Balboa Slimline Air Control 10-2310 as well as other Balboa manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Balboa Slimline Air Control 10-2310. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Balboa Magna'flow Manifold Jet Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Balboa Magna'flow Manifold Jet Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Balboa Magna'flow Manifold Jet Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Balboa Magna'flow Manifold Jet Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Balboa Magna'flow Manifold Jet Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.