A. Using Windows 8 / Windows 10
On your desktop / PC click the Available wireless network icon.
1.
4 Internet Connectivity After turning ON your device, your Aztech MWR638 device will automatically connect to the Internet. You may refer to your Aztech MWR638s screen display and quickly verify Internet connectivity through the Internet Status icon and/or through the Network Type / icon used by the device.
5 Connecting Wirelessly Connecting your devices to your wireless network is easy. Before proceeding, ensure that your device is equipped with a working wireless network adapter.
Please refer to your Aztech MWR638s device label sticker (as seen on page 4) in connecting to its wireless network.
Scan for the AztechMWR638_XXXX SSID (wireless network name) then click the Connect button.
2.
Correctly enter the required WiFi Key (wireless password).
3.
On your iOS device, press Settings > WLAN. If the Wi-Fi status is OFF, turn it ON.
1.
On the Wireless Network list, scan for AztechMWR638_XXXX , tap and correctly enter the WiFi Key found on its device label sticker (see page 4).
2.
A check symbol would be seen beside your Aztech MWR638s network name, indicating a successful connection.
3.
On your android device, press Settings > Wi-Fi.
1.
On the Wireless Network list, scan for AztechMWR638_XXXX, tap, and correctly enter the WiFi Key found on the device label sticker.
2.
A Connected status would be seen below the Aztech MWR638s SSID, indicating a successful connection.
3.
6 The Web User Interface The Web User Interface allows you to modify your Aztech MWR638s configuration, and other settings.
Ensure that your desktop is connected to your Aztech MWR638s wireless network.
C. Using Android Devices
On your web browser, type in 192.168.2.1. You will be redirected to your Aztech MWR638s web user interface login page. Log in using the default password admin.
1.
2.
The wireless network status would display Connected after a successful connection.
4.
NOTE : Web user interface access can only be done by one (1) device at a time.
To Access the Web User Interface
B. Using Apple / iOS Devices
9 Device Tips & Reminders In using your Aztech MWR638 device, you may try to do the following actions below if you are unable to use the device properly:
7 Configuring your Wireless Network
If you have forgotten the web user interface password, the WiFi Key, and/or SSID of your Aztech MWR638 device, you can restore your device to its default factory settings. This will immediately erase all configurations made on your device.
To do this, simply press and hold the reset button until the device restarts. You may now log in / connect your wireless devices to your MWR638 using its default settings.
8 Factory Default Reset
Allow it to cool down. During prolonged use, the device will accumulate heat. This may affect the overall performance of the device. If this occurs, it is recommended to power OFF the device and allow it to cool down for a couple of minutes. Recharge Battery. Your devices battery might have been fully drained. Simply recharge your device using the USB Cable provided in the package. Relocate device for better Signal Reception. Check if the Internet status icon is present or if your device is using 3G or 2G Network on its screen display. You may try repositioning the device for better Internet connectivity and/or network signal reception. Power OFF/ON the device. Restart the device. Restore it to Factory Defaults. Simply press and hold the Reset button until the device restarts. Please take note that all configurations / settings made on your device will be erased. Contact your Operator
</