Aztech WL559E Repeater User Manual PDF

WL559E

PORTABLE 300mbps

WIRELESS-N REPEATER

V1.3

User Manual

Page 2 of 44

COPYRIGHT 2014 ALL RIGHTS RESERVED

No part of this document may be reproduced, republished, or retransmitted

in any form or by any means whatsoever, whether electronically or

mechanically, including, but not limited to, by way of photocopying,

recording, information recording, or through retrieval systems without the

express written permission. We reserve the right to revise this document at any

time without the obligation to notify any person and/or entity. All other

company or product names mentioned are used for identification purposes

only and may be trademarks of their respective owners.

LIMITATION OF LIABILITY AND DAMAGES

THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED "AS IS," BASIS. THE

MANUFACTURER AND MANUFACTURERS RESELLERS (COLLECTIVELY REFERRED

TO AS THE SELLERS) DISCLAIM ALL WARRANTIES, EXPRESS, IMPLIED OR

STATUTORY, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE, OR ANY WARRANTIES ARISING FROM COURSE OF DEALING, COURSE

OF PERFORMANCE, OR USAGE OF TRADE. IN NO EVENT WILL THE SELLERS BE

LIABLE FOR DAMAGES OR LOSS, INCLUDING BUT NOT LIMITED TO DIRECT,

INDIRECT, SPECIAL WILLFUL, PUNITIVE, INCIDENTAL, EXEMPLARY, OR

CONSEQUENTIAL, DAMAGES, DAMAGES FOR LOSS OF BUSINESS PROFITS, OR

DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY THIRD PARTY

ARISING OUT OF THE USE OR THE INABILITY TO USE THE PRODUCT OR THE

SOFTWARES, INCLUDING BUT NOT LIMITED TO THOSE RESULTING FROM DEFECTS

IN THE PRODUCT OR SOFTWARE OR DOCUMENTATION, OR LOSS OR

INACCURACY OF DATA OF ANY KIND, WHETHER BASED ON CONTRACT, TORT

OR ANY OTHER LEGAL THEORY, EVEN IF THE PARTIES HAVE BEEN ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. THE ENTIRE RISK AS TO THE RESULTS AND

PERFORMANCE OF THE PRODUCT OR ITS SOFTWARE IS ASSUMED BY

CUSTOMER. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR

LIMITATION OF LIABLITY FOR DAMAGES, THE ABOVE LIMITATION MAY NOT

APPLY TO THE PARTIES. IN NO EVENT WILL THE SELLERS TOTAL CUMULATIVE

LIABILITY OF EACH AND EVERY KIND IN RELATION TO THE PRODUCT OR ITS

SOFTWARE EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT.

User Manual

Page 3 of 44

Contents About the Device ........................................................................................................ 5

Minimum System Requirements ................................................................................. 6

Package Contents ....................................................................................... 6

Device Design .............................................................................................................. 7

Front Panel ..................................................................................................... 7

Top Panel ....................................................................................................... 7

Bottom Panel ................................................................................................. 8

Getting Started ............................................................................................................. 9

Plan your Network ...................................................................................... 10

Setting up the Device ................................................................................ 11

Wireless Repeater ....................................................................................... 11

Access Point (AP) ....................................................................................... 13

Wireless Bridge ............................................................................................. 14

The Web User Interface ............................................................................................. 15

Accessing the Web User Interface .......................................................... 15

Web User Interface Menu ......................................................................... 17

Quick Connect ........................................................................................... 17

Setup ............................................................................................................. 19

Wireless ......................................................................................................... 21

System .......................................................................................................... 27

Device Status .............................................................................................. 33

WPS ............................................................................................................... 34

Default Settings .......................................................................................................... 35

FAQs ............................................................................................................................. 37

Troubleshooting .......................................................................................................... 39

Appendix ..................................................................................................................... 40

What are Repeaters? ................................................................................. 40

Why should I Use WL559E? ......................................................................... 40

Would Repeaters provide less bandwidth? ........................................... 40

User Manual

Page 4 of 44

How would the SMART LED help me find signal? .................................. 40

What is Bridge Mode? ................................................................................ 40

What is AP Mode? ...................................................................................... 41

How does the WPS button allows faster wireless connectivity? .......... 41

User Manual

Page 5 of 44

About the Device

Aztech WL559E is a Wall-plugged 300Mbps Wireless-N Repeater, which

supports wireless 802.11b/g/n, and one 10/100 Base-T Ethernet port.

Repeat and Extend the WiFi Network

WL559E supports robust 802.11n technology with up to 300Mbps data transfer

rate. The extender can take an existing 802.11n wireless signal, repeat and

extend it to a longer range where it is too far away for the router or

access point to reach. It eliminates the cable wires while providing the

same reliable network connection. It can repeat and extend the wireless

signal from virtually any 802.11n wireless router or access point that is

launched on the market. It is backwards compatible with the 802.11b/g

router or access point.

Make Wired Network WiFi Ready

The extender is equipped with 1 x 10/100M Auto MDI/MDIX LAN port that can

be used to connect to an existing wired network to serve as a wireless

interface. It can also be used to configure the extender via its web-based

GUI, or upgrade the firmware.

MIMO Technology

The device is designed with MIMO technology, which successfully reduces

dead spot, and extends network coverage within a home or in the

building.

Advanced Security

WL559E features with 64/128-bit WEP encryption and WIFI Protected Access

(WPA), WPA2 to ensure the network security and prevent unauthorized

access to you network.

Portable without the Need of External Power Supply

The device is easy to setup. It is portable with no need of any external power

adaptor. It comes with the embedded power supply and power plug, so that

users can just plug the device into a power socket.

User Manual

Page 6 of 44

Minimum System Requirements

Your computer must meet the following minimum requirements.

Any operating system can be used

Web Browser

233MHz processor

Ethernet network adapter

Or Wireless network adapter

Package Contents Please check the package contents listed below. For any missing items,

please contact your dealer immediately. Product contents vary for different

models.

WL559E

Ethernet cable

Easy Start Guide

Resource CD

User Manual

Page 7 of 44

Device Design

Front Panel

SMART LED

Indicator

NOTE: Your WL559Es SMART LED Indicator, determines the

signal strength from your wireless router. Wireless reception and

throughput may vary according to the number of wireless

clients that are in use, and at the same time, other nearby

wireless devices, structure types, building materials, and other

interferences present.

TIPS: The higher the throughput, the lower the extended wireless

coverage.

User Manual

Page 8 of 44

Top Panel

Bottom Panel

LABEL DESCRIPTION

WPS

BUTTON Connect WL559E to any WPS capable devices

LABEL DESCRIPTION

RESET Press the Reset button for 5 seconds to restore the

device to default factory settings

ETHERNET

PORT Connect to computers/Ethernet devices

WPS Button

Reset Button

10/100 Ethernet port

User Manual

Page 9 of 44

Getting Started

Setting up the device is easy. The flowchart below provides an outline of the

steps needed in order to complete the installation. Brief descriptions appear

beside each step. Detailed instructions are provided in the subsequent

pages.

After deciding the intended usage of your

WL559E, you may now setup your device

according to the desired mode. You would

also be using the Web User Interface in this

area.

Your device is now ready to use.

Plan your Network

Setting up the

Device

Ready to Use

A basic description of the different modes of

your WL559E are provided to guide you in

deciding how it will be used.

User Manual

Page 10 of 44

Plan your Network Your WL559E can be setup into three different operation modes. It can either

be as a Repeater, as an Access Point (AP), or as a Wireless Bridge. Each

setup is done differently and has different implications that greatly depend

on the availability of devices or its intended usage.

NOTE: It is important to know what the intended usage of your WL559E is. This

is to familiarize yourself in the various applications your WL559E can provide to

your network needs.

Repeater. Configure your device as a wireless repeater to extend the

wireless coverage of your wireless router.

Access Point. Configure your device as an access point to provide

wireless network capabilities to your modem.

Bridge. Configure your device as a Bridge to act as wireless client to

your network device.

User Manual

Page 11 of 44

Setting up the Device

In setting up your device kindly follow the instructions provided for the desired

setup of your WL559E. It is important to know what the intended usage of your

WL559E is, before doing the setup. You may also refer to the provided setup

diagrams to setup your device easily.

Wireless Repeater

a. Plug your WL559E to a power outlet.

b. Connect your WL559E to the computer using an Ethernet cable

through their respective Ethernet ports.

c. Launch a web browser and you will automatically be redirected to the

Web User Interface of your WL559E. If in any case it does not open,

kindly type 10.0.10.254 on the address bar and hit enter.

d. Select your SSID (wireless network/wifi name) from the list and click the

Connect button .

User Manual

Page 12 of 44

e. Type the password for the wireless network of your router and click

apply. The WL559E will reboot and will redirect to the user interface with

the following status.

f. Disconnect the Ethernet cable from WL559E and computer then place

the device at the location where it can get sufficient reception from

your wireless router.

User Manual

Page 13 of 44

Access Point (AP)

Setup your WL559E as an access point to provide wireless network to router

that doesnt have wireless feature.

a. Plug your WL559E to a power outlet.

b. Connect an Ethernet cable between the WL559E and Computer.

c. Launch web browser and you will be directed to the User Interface.

d. Go to Setup, set Mode of Operation to Access Point.

e. Type the name of your wireless network under SSID.

f. Type the password of the wireless network in the WPA Passphrase

textbox and click apply.

g. Connect the WL559E to routers LAN port after the settings have

been saved.

User Manual

Page 14 of 44

Wireless Bridge

Connect wired devices to your wireless network by connecting an Ethernet

cable from a wired device, such as a Desktop PC, Game Console or Internet-

ready LCD TV, to the Ethernet port of the WL556E.

a. Plug in and turn ON your WL559E

b. Connect the Ethernet cable between your computer and WL559E

c. Launch a web browser. You will be directed to the web user interface.

d. Click on Setup and set Mode of Operation to Bridge.

e. Type the name of your wireless network for the SSID.

f. Enter the channel and password of your wireless network and click

apply.

User Manual

Page 15 of 44

The Web User Interface

The Web User Interface of your WL559E allows you to configure the various

features of your WL559E. This will serve as your main tool in monitoring and

configuring all of your WL559Es main features.

Accessing the Web User Interface

NOTE: To avoid any conflicts in accessing the Web User Interface, it is strongly

advised to do the following:

Simply access the Web User interface through an Ethernet connection.

This is achieved by connecting your Computer and your WL559E

through an Ethernet cable.

If present, kindly turn off the wireless adapter of your computer. You

may enable the wireless adapter after completing the setup. This is to

avoid IP address conflict which might block you from accessing the

Web user interface.

To access the Web User Interface through an Ethernet connection:

1. Connect your computer to the WL559E device using an Ethernet cable.

NOTE: before proceeding to step 2, check the SMART LED INDICATOR

of the device. The LED should be in GREEN WEAK status and BLINKING.

2. Launch any web browser. You would automatically be redirected to

your WL559Es web user interface.

3. If in any case it does not, kindly type 10.0.10.254 on the address bar

and press Enter. You will then be redirected to the Home page of your

WL559Es web user interface.

4. Upon redirecting, a window showing the wireless networks within range

would appear. You may close this mini window or choose to connect

to your preferred wireless network immediately.

User Manual

Page 16 of 44

If you wish to connect to a wireless network immediately you may do

the following steps:

a. Click the connect button that corresponds to the network you

want to connect to.

b. Enter the correct Wireless Password of the preferred network then

click the Apply button.

c. Kindly wait for the repeater to finish initializing its connection. Your

WL559E would reboot upon successful connection.

NOTE: To know if you have successfully connected to your device,

please check the LEDs of your WL559E; The SMART LED INDICATOR

would be in STABLE GREEN light.

User Manual

Page 17 of 44

Web User Interface Menu

The web user interface was made for users to easily access and control your

WL559Es main features. It is mainly comprised of the following menus:

Quick Connect

The Quick Connect menu allows you to scan for the available wireless

networks within range and connect to your preferred wireless network as well.

To connect to a Wireless Network, simply do the following:

a. Click the Quick Connect menu icon and wait for the search

initialization to finish.

b. Determine your preferred wireless network then click its

corresponding Connect button. You will then be redirected to

the Wireless Setup page of your WL559E as seen below:

User Manual

Page 18 of 44

c. Determine the mode of operation of your WL559E. Do take note

that these modes of operation have their respective steps in device

setup. You may also refer to the Plan your Network section of this

user manual.

NOTE: If the mode of operation is set to repeater, you are not

allowed to change the SSID of the network. The MAC Address on

the other hand could not be changed even if you change the

modes of operation.

d. Input the Wireless networks passphrase on the WPA Passphrase

(Wireless Password) text box then click Apply. Kindly wait for the

repeater to finish initializing the connection. Your repeater would

reboot upon successful connection.

NOTE: To know if you have successfully connected to your device,

check the LEDs of your WL559E; it would be in STABLE GREEN light.

User Manual

Page 19 of 44

Setup

The Setup page shows the current properties of the WL559E. This page also

allows you to change the mode of operation, the SSID, the security mode,

enable or disable the broadcast of your SSID, change the passphrase of the

SSID broadcasted by your WL559E, and define the encryption type.

Mode of Operation. Allows you to change the current function of

your WL559E. You may also refer to the Plan your Network section of

this user manual.

SSID. Refers to your WL559Es wireless network name.

MAC Address. The MAC address of your WL559E. The information in

this field cannot be changed.

Broadcast SSID. Allows you to enable or disable the broadcast of

your wireless. By disabling this, you have to manually connect to

your wireless network.

Security Mode. Allows you to configure the combination of

characters the wireless password would have.

User Manual

Page 20 of 44

WPA Passphrase. Allows you to add the current wireless password of

the Wireless Network. You are only allowed to configure this AFTER

you have successfully connected to a network.

WPA Encryption. Allows you to change the encryption settings of

your WL559E.

User Manual

Page 21 of 44

Wireless

The Wireless page shows the current properties of the Wireless Network

broadcasted by your WL559E. This menu allows you to modify basic router

settings, your wireless networks security settings, and also add and delete

MAC filters.

The Wireless page has the following sub menus that can be found on the

second layer of icons just below the main menu icon shortcuts:

Basic Wireless Settings

Wireless Security Settings

MAC Filter Settings

User Manual

Page 22 of 44

Basic Wireless Settings

The Basic Wireless Settings page allows you to configure the basic properties

of your WL559E such as enabling the wireless feature and SSID broadcast,

changing the name of the Wireless SSID, defining a preferred wireless mode

for your WL559E, changing the Wireless channel and various HT properties.

Enable Wireless. Enable or Disable the wireless feature of your WL559E.

By default the Wireless feature of your WL559E is enabled.

Broadcast SSID. Set option to disable to hide your wireless network. By

default, the SSID Broadcast is enabled.

SSID. Allows you to designate a name for your WL559Es wireless

network.

NOTE: It is suggested to leave this field in its default value: 11b/g/n

mixed mode to ensure backward compatibility with older routers and

wireless devices.

User Manual

Page 23 of 44

Wireless Mode. This option allows you to select the type of wireless

standard you want to allow to connect to your wireless network.

Channel. You may opt to change your wireless channel when you are

getting poor reception. You may choose the least channel used in your

area for better wireless performance.

Channel Bandwidth. Allows you to set your Channel Bandwidth to

20MHz and 20/40MHz (Auto). It is strongly suggested to leave this in its

default value : 20/40MHz.

HT Data Rate and HT Guard Interval. These options are recommended

to be set to Auto for maximum efficiency.

User Manual

Page 24 of 44

Security Settings

The Wireless Security Settings page allows you to change the Security Mode,

enable or disable the WPS feature of your WL559E, and add a WPS enabled

device by entering the needed PIN.

Security Mode. Select the type of encryption you want for your wireless

network.

WPS. Allows you to enable or disable the WPS feature of your WL559E.

Enrollee PIN. Enter this PIN to wireless client that will be connecting to

WL559E repeater to automatically configure the wireless device.

Registrar PIN. Here you can enter the WPS-PIN of wireless clients and

click apply for the WL559E to allow access and configure your wireless

client device automatically

Note: WPS will work only for WPA-PSK, WPA2-PSK and WPA/WPA2

encryption. Wireless client should support WPS feature to use this

option.

User Manual

Page 25 of 44

MAC Filter Settings

The MAC Filter Settings page will provide additional protection to your

wireless network. It allows or denies wireless clients from accessing the WL559E

with the use of the MAC address which is unique for every network devices.

To add a MAC Filter:

1. Specify your preferred Policy.

Disable. Disables the application of a MAC Filter to a specific

device or of all MAC Addresses.

Allow. Allows the specified MAC Addresses to connect to the

Wireless network.

Deny. Denies the specified MAC Addresses connection to the

Wireless network.

NOTE: By clicking the Apply button without specifying a MAC

Address, you would be applying the selected policy to all MAC

addresses on the list.

2. Enter the MAC Address of the device where the selected Policy would

apply.

User Manual

Page 26 of 44

To know the MAC Address of your computer, you may simply do the

following:

a. On the Start menu click Run.

b. On the input box of the Run window, type in: cmd to open the

command prompt.

c. On the command prompt, key in ipconfig/all.

d. Locate the Ethernet Adapter Ethernet or Ethernet Adapter Local

Area Network section and find the Physical Address (MAC

Address).

3. Click the button located beside the MAC Address text box to

apply changes.

To remove a MAC Filter:

1. Click the button that corresponds to the MAC address that you

wish to remove from the list.

User Manual

Page 27 of 44

System The System page allows you to configure various system oriented settings

such as changing the devices IP Address, backing up the current

configuration settings, upgrading the devices firmware, restoring the device

from a previously saved configuration file, resetting the device to its factory

default, and defining a user password for the Web UI.

The Systems page has the following submenus:

Device Info

Local Network

Configuration Settings

Firmware upgrade

System Password

User Manual

Page 28 of 44

Device Information

Allows you to view basic device information regarding your WL559E such as

the firmware version and its build date, the devices serial number, MAC

addresses of various interfaces, and view the Wireless status.

Firmware Version. Shows the current firmware version of the device

Build Date. Shows the date when firmware is created

Serial Number. Shows the devices serial number.

ETH/Bridge and Wireless MAC address. Shows the MAC address of the

different Interfaces.

Wireless Status. Shows the wireless devices wireless status

User Manual

Page 29 of 44

LAN Configuration

The LAN Configuration page allows you to specify a device IP address and

Device subnet mask that your WL559E will use.

Note: Change the IP Address (e.g. 10.0.10.251) in this field if you are using two

WL559Es on the same network in order to avoid the occurrence of IP address

conflict. Do take note that the IP Address in this field would also be the one

you would be using in accessing the Web User Interface of your WL559E.

Configuration Settings

The configuration settings page allows you to backup WL559E settings, do a

firmware upgrade, and restore an existing configuration by using the backed

up file.

User Manual

Page 30 of 44

Backup. Allow you to save the current configuration of WL559E. Default

file name for the backup file will be RT2880_Settings.dat. Click Apply

to start saving your configuration.

Update. Here you can load the saved configuration of your WL559E.

Click browse and load the saved settings then click the Apply button.

Restore. Click on the apply button to reset the unit back to its default

factory settings. Unsaved information will be lost.

User Manual

Page 31 of 44

Firmware Upgrade

The Firmware Upgrade page allows you to update the firmware of your

device for future changes and enhancement, however, it is strong suggested

to only upgrade your device firmware if it was advised by Aztech. You may

download the latest firmware for your device at www.aztech.com/support.

To update the firmware kindly follow the instructions below:

a. From the System page, click the Firmware Upgrade button.

b. Click on the Browse button and locate and open the firmware for

WL559E (single.img)

c. Click Apply to start the update. Wait for the firmware upgrade to finish

and reboot. You will be redirected to the Homepage of your WL559E.

Note: It is strongly recommended to only use firmware officially

released by Aztech, Using third party firmware will void the warranty of

the device.

User Manual

Page 32 of 44

System Password

Set a password on web user interface to prevent other users from getting

access to the web UI and avoid unwanted changes from your settings. To

add a system password, simply type in your preferred password and click on

apply to activate this feature. To disable, simply remove the password and

click apply to save your settings.

Note: Forgotten password cannot be recovered. Reset the device to its

factory default by pressing the reset button found beside the Ethernet port of

WL559E for 11 seconds.

User Manual

Page 33 of 44

Device Status The device status page shows the current status of the AP, and also the client

devices that are currently connected wirelessly to your WL559E.

User Manual

Page 34 of 44

WPS WPS or Wifi Protected Setup makes it easier for you to connect your WL559E

to your wireless router and the WL559E to your wireless devices with a simple

push of a button.

To connect the WL559E to a Wireless Router via WPS:

1. Press the WPS button of WL559E for 5 seconds.

2. Press the WPS button on your router for 2 seconds.

To connect the WL559E to a Wireless client via WPS:

1. Press the WPS button of WL559E for 2 seconds.

2. Press the WPS button on the wireless client for 2 seconds.

NOTE: To accomplish a successful connection through WPS, simply

accomplish the process correctly within two minutes. It is also important to

ensure that the WPS feature of the device is enabled and must also be

supported on the wireless router and even the wireless devices that will be

connected to your WL559E.

User Manual

Page 35 of 44

Default Settings

We have listed below the default values of the fields present in your WL559E.

This could be of use as reference.

FIELDS DEFAULT VALUE Device IP Address 10.0.10.254

Device Subnet Mask 255.255.255.0

Security Mode Open

Channel 2412MHz (Channel 1)

Enhanced Compatibility ON

Broadcast SSID Enabled

Mode of Operation Repeater

Wireless SSID Wireless-559E

Wireless Mode 11b/g/n mixed mode

HT Data Rate Auto

HT Channel Bandwidth 20/40

HT Guard Interval Auto

Security Mode None

WPS Enabled

Policy Disabled

User Manual

Page 36 of 44

Warranty Policy

Aztech warrants this product against defects in material and workmanship. A

product determined by authorized service representative to be defective in

form or function will be repaired or at our option, to be replaced at no

charge.

This warranty does not cover any losses or damages that occur as a result of :

Improper installation

Misuse, abuse, neglect or operation with faulty equipment

Repair or modification by anyone other than Aztech or an authorized

repair agent

Defects due to wear and tear, act of God or any other causes and not

due to original manufacturer defect

Aztech will not be liable for any loss, damage or alteration to :

1. Third party hardware or software,

2. Programs, data, or information stored,

3. Any loss or damage arising from the loss of use, loss of profits or

revenue, or for any resulting indirect or consequential loss or damage.

The warranty is not valid unless the purchaser registers online

within 14 days of purchase.

Please register your warranty online at:

www.aztech.com/support

User Manual

Page 37 of 44

FAQs

1. Why cant I access the Web UI of my WL559E?

Ensure that the Ethernet cable is properly connecting your WL559Es

and Desktop/computer through both of the devices Ethernet ports.

You may turn-off / disable the wireless adapter of your computer (if

applicable and launch a Web browser. It should redirect you to User

Interface of the WL559E (If in any case it does not type

http://10.0.10.254 on your Web browser Ex: Internet Explorer, Firefox,

or Chrome etc.)

2. What if I want to change some of the configurations set on my WL559E

after it has been previously configured and connected to my wireless

AP/Router?

If you are connected to the WL559Es wireless network, you may just

open your Web browser and type http://10.0.10.254 on the address

bar to get to the Web user interface.

Another way is to connect your desktop/pc to the WL559E using an

Ethernet cable, and type http://10.0.10.254 on the address bar to

get to the Web user interface.

3. Will the WL559E increase the range and throughput of my wireless

AP/Router?

The WL559E will extend the range of your wireless AP/router but it will

NOT increase the throughput. All repeaters will sacrifice half of the

bandwidth available from the primary router for all of the clients

wirelessly connected to the repeater. This is a result of the repeater

taking turns talking to not just one partner, but to two, and having to

relay the traffic between them.

User Manual

Page 38 of 44

4. Can I connect a second WL559E to the current WL559E that I have

already connected to my wireless AP/router?

It is possible to extend the wireless signal of your first WL559E by

connecting another WL559E to it. But you must understand that each

time the wireless signal is repeated, the repeated signal will be half of

the original. So in theory, if your wireless AP/router gives a total

throughput of about 50Mbps, after the 1st WL559E it will be around

25Mbps and 12.5Mbps after the 2nd WL559E. Actual throughput might

be lower than this after taking in consideration walls and other

interference in the wireless medium.

5. Can I use the WL559E with my old wireless-G AP/router?

Yes. Even if the WL559E is a wireless-N repeater, it is backward

compatible with wireless b and g devices including AP and clients.

6. Why can't I connect to the Internet when I pressed the WPS on the

WL559E?

The WPS button of the WL559E is meant for connecting your AP/Router

and wireless devices to the WL559E. When the WPS is activated, Light in

Amber color will blink within 2 minutes. If WL559E was already

connected to any AP/Router, Internet on the WL559E will stop to scan

for connecting AP/Router or wireless client. If in any case the

association is not successful you will need to reboot the WL559E to

restore its connection to the Internet.

User Manual

Page 39 of 44

Troubleshooting

If you encounter any internet or wireless connectivity issues, please try the

following:

1. Unplug and plug the device.

2. Wait for the Smart LED Indicator to be in STEADY GREEN. Ensure that the

SMART LED has sufficient signal (preferably at two bars) to cover for

your wireless needs.

3. Check if the Ethernet cable connecting your Ethernet device to the

WL559E is PROPERLY connected.

4. Open a web browser and check if the WL559E is correctly connected

to a wireless network in your home.

If it is not, reconnect your WL559E to the routers wireless network.

You may have to reconnect your wireless devices again to your

WL559E.

If it is, check if your wireless router has an ACTIVE internet

connection. You may try surfing a website to test this.

5. If the following instructions above did not work you may try the

following:

Plug the WL559E to a different power outlet.

Relocate the WL559E to an area which would provide it with better

router signal reception.

Perform a factory reset by pressing the Reset button for 10 seconds

and repeat the steps mentioned above.

User Manual

Page 40 of 44

Appendix

What are Repeaters?

As the term suggests, wireless repeater REPEAT wireless signals coming from

your router in order to reach areas that are in need of wireless coverage.

Why should I Use WL559E?

Whether you like it or not, your router cannot fully provide wireless coverage

all over your home, areas with weak wireless signals or even blind spots are

sure to occur. With the WL559E, say goodbye to these blind spots and extend

wireless signals to any part of your home that needs it.

Would Repeaters provide less bandwidth?

In concept, a router talks to wireless devices only. This allows routers to

provide FULL bandwidth to all wireless devices involved. With repeaters, the

communication is two-way; a repeater talks to both the router to repeat its

signal, and a wireless device, where it will relay the signal.

How would the SMART LED help me find signal?

The WL559Es SMART LED detects signal quality. The nearer it is to the router,

the stronger the LED bar display will be. Through the SMART LED, you will be

capable of knowing where to place the WL559E by looking at the signal

provided by the router in this area.

What is Bridge Mode?

The WL559Es bridge mode allows your Ethernet devices to connect wirelessly

to a router. With the WL559Es bridge mode, enable your Ethernet device to

use the WL559E as a wireless client by enabling its Bridge Mode.

User Manual

Page 41 of 44

What is AP Mode?

The WL559Es Access Point mode allows your modem to have wireless

capabilities. By enabling the AP mode of the WL559E, enable your modems

to have a wireless feature and connect all your wireless devices that need

internet connection.

How does the WPS button allow faster wireless connectivity?

The WPS or Wi-Fi Protected Setup button allows you to connect your wireless

devices to the WL559E and even connect the WL559E to a wireless router with

a simple press of the WPS button. You may have to, however, check the user

manual of the device you will pair the WL559E with, to know how many

seconds the wireless devices WPS button should be pressed.

User Manual

Page 42 of 44

Safety Precautions

Do not open, service, or change any component.

Only qualified technical specialists are allowed to service the

equipment.

Observe safety precautions to avoid electric shock

Check voltage before connecting to the power supply. Connecting to

the wrong voltage will damage the equipment.

User Manual

Page 43 of 44

User Manual

Page 44 of 44

Copyright 2014 Aztech Technologies Pte Ltd (CRN:199800635M). All rights reserved.