Aztech HL125G HomePlug Easy Start Guide PDF

Download download
Aztech HL125G HomePlug Easy Start Guide PDF
Aztech Manual Aztech HomePlug Manual Aztech HL125G Manual Aztech HomePlug Easy Start Guide
Pages 2
Year 0
Language(s)
English en
1 of 2
1 of 2

Summary of Content for Aztech HL125G HomePlug Easy Start Guide PDF

Page 1

MODEL HL125G

The following items are included in your HL125G package.

Package Contents

HomePlug AV devices are preconfigured with a common Private Network Name. Adding new HomePlug AV devices to an existing network with the default Private Network Name is as easy as plugging the device into the power outlet. If you wish to have a unique private Network Name, simply follow the instructions below. This Easy Start Guide, the User Manual, and the HomePlug AV Utility software is included in the Resource CD and is also downloadable on our Aztech Support Website (www.aztech.com/support).

Device Overview

Setting up your HomePlug AV Network

Step 1 In Room A, plug in your HomePlug AV device into the power outlet and connect it to the router using an Ethernet cable. NOTE: Ensure that your routers internet connection is UP to allow access to the internet.

Step 2 In Room B plug in your HL125G into the power outlet and connect it to your Ethernet devices (e.g. Desktop, IPTV etc.) using an Ethernet cable.

A

B

C

Powerline Activity LED

Ethernet Activity

LEDs

Power LED

Simple Connect Button

Ethernet Ports

Port 1 : Highest Priority Port 2 : Medium Priority Port 3 : Medium Priority Port 4 : Lowest Priority

Step 3 Confirm that a connection has established on both HomePlug AV devices. All 3 LEDs (Power , Powerline , and Ethernet ) must be ON. Your Homeplug AV Network is now ready to use and can access Internet.

DEVICES ARE PLUG AND PLAY READY.

Resource CD Easy Start Guide

Ethernet Cable

HL125G Warranty Card

BACK VIEW

Power Jack Reset Button (underneath device)

Page 2

MODEL HL125G

Setup for an Existing Network ConnectionD

If in case you have changed the Private Network Name of your existing network, you may use the Simple Connect Button of your HL125G and the other devices as indicated below:

Within two minutes, press the Simple Connect Button of HomePlug AV X for TWO SECONDS.

3

Step 3

To confirm if the connection has established, check the LEDs. The Power LEDs and the Powerline Activity LEDs on all HomePlugs would be ON.

4

Step 4

NOTES: When joining an existing network, you only have to pair it to one HomePlug AV that belongs to the existing network. The Ethernet Activity LED will only be lit if it is connected to an Ethernet device (e.g. computer, laptop, etc) through an Ethernet cable. To perform RESET to factory defaults, press the Reset Button for 3 SECONDS.

Press the Simple Connect Button of your HomePlug AV X for 10 SECONDS. After you release the button, the Power and Powerline Activity LED will turn OFF and turn ON.

1

Step 1

Press the Simple Connect Button of HomePlug AV Y for TWO SECONDS. The Power LED will continuously blink. If the Power LED did not blink, press the Simple Connect button

again for two seconds.

2

Step 2

Press for 3 SECONDS to perform factory defaul reset.

HomePlug X (Your new HomePlug)

HomePlug Y (A HomePlug that belongs to the existing n

Manualsnet FAQs

If you want to find out how the HL125G Aztech works, you can view and download the Aztech HL125G HomePlug Easy Start Guide on the Manualsnet website.

Yes, we have the Easy Start Guide for Aztech HL125G as well as other Aztech manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Easy Start Guide should include all the details that are needed to use a Aztech HL125G. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Aztech HL125G HomePlug Easy Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Aztech HL125G HomePlug Easy Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Aztech HL125G HomePlug Easy Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Aztech HL125G HomePlug Easy Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Aztech HL125G HomePlug Easy Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.