Aztech WIPC410 Enhanced HD Camera User Manual PDF

1 of 44
1 of 44

Summary of Content for Aztech WIPC410 Enhanced HD Camera User Manual PDF

WIPC410 Enhanced HD ENHANCED WIRELESS N PAN/TILT

HIGH DEFINITION IP CAMERA

V1.1

2

User Manual

Copyright 2015 All rights reserved. Ver1.1

No part of this document may be reproduced, republished, or retransmitted in any

form or by any means whatsoever, whether electronically or mechanically, including,

but not limited to, by way of photocopying, recording, information recording, or

through retrieval systems without the express written permission. We reserve the right

to revise this document at any time without the obligation to notify any person

and/or entity. All other company or product names mentioned are used for

identification purposes only and may be trademarks of their respective owners.

LIMITATION OF LIABILITY AND DAMAGES

THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED "AS IS," BASIS. THE

MANUFACTURER AND MANUFACTURERS RESELLERS (COLLECTIVELY REFERRED TO AS

THE SELLERS) DISCLAIM ALL WARRANTIES, EXPRESS, IMPLIED OR STATUTORY,

INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTIES

ARISING FROM COURSE OF DEALING, COURSE OF PERFORMANCE, OR USAGE OF

TRADE. IN NO EVENT WILL THE SELLERS BE LIABLE FOR DAMAGES OR LOSS, INCLUDING

BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL WILLFUL, PUNITIVE, INCIDENTAL,

EXEMPLARY, OR CONSEQUENTIAL, DAMAGES, DAMAGES FOR LOSS OF BUSINESS

PROFITS, OR DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY THIRD

PARTY ARISING OUT OF THE USE OR THE INABILITY TO USE THE PRODUCT OR THE

SOFTWARES, INCLUDING BUT NOT LIMITED TO THOSE RESULTING FROM DEFECTS IN THE

PRODUCT OR SOFTWARE OR DOCUMENTATION, OR LOSS OR INACCURACY OF DATA

OF ANY KIND, WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY,

EVEN IF THE PARTIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE

ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE PRODUCT OR ITS

SOFTWARE IS ASSUMED BY CUSTOMER. BECAUSE SOME STATES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF LIABLITY FOR DAMAGES, THE ABOV E LIMITATION MAY

NOT APPLY TO THE PARTIES. IN NO EVENT WILL THE SELLERS TOTAL CUMULATIVE

LIABILITY OF EACH AND EVERY KIND IN RELATION TO THE PRODUCT OR ITS SOFTWARE

EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT.

3

User Manual

Table of Contents

About the Product ....................................................................................................... 5

Function and Features ................................................................................................ 6

Appearance and Interface ....................................................................................... 7

Appearance ............................................................................................................. 7

Interfaces of the WIPC410 ENHANCED HD ........................................................... 7

LAN Port LED Behaviors ............................................................................................ 8

Network Connection ................................................................................................... 8

Connection Instructions .......................................................................................... 9

Visiting the IP Camera ............................................................................................. 9

Visit IP Camera from LAN .......................................................................................... 10

Set IP Address ......................................................................................................... 10

Visit IP Camera ....................................................................................................... 11

Web User Interface .................................................................................................... 12

Menu ........................................................................................................................ 12

Video Displaying Area ....................................................................................... 13

SD Card ................................................................................................................... 13

Capture ................................................................................................................. 14

Record ................................................................................................................. 14

Playback ................................................................................................................ 14

The Pan/Tilt Control ................................................................................................ 14

Notice (for Initial Use) ............................................................................................. 15

Visit IP Camera from WAN ........................................................................................ 15

Port Forwarding ...................................................................................................... 15

DDNS ........................................................................................................................ 16

Manufacturers Domain Name ........................................................................ 17

Third Party Domain Name ................................................................................. 17

Other Settings ............................................................................................................. 18

Media....................................................................................................................... 18

Video Settings ..................................................................................................... 18

Audio Settings ..................................................................................................... 19

Image Settings .................................................................................................... 19

4

User Manual

Network ................................................................................................................... 20

Basic Network Setting......................................................................................... 20

WIFI Setting .......................................................................................................... 20

Remote Access Setting ...................................................................................... 21

Alarm ........................................................................................................................ 22

Motion Detection Setting .................................................................................. 22

Sound Alarm ........................................................................................................ 23

Alarm .................................................................................................................... 23

Alarm Time Setting / Schedule ......................................................................... 24

Advanced ............................................................................................................... 25

User 25

Auto Capture Setting ......................................................................................... 26

FTP Setting ............................................................................................................ 26

E-mail Setting ....................................................................................................... 27

Multiple Settings .................................................................................................. 27

Schedule Recording .......................................................................................... 28

Schedule Recording .......................................................................................... 28

System ...................................................................................................................... 29

Device Information Checking .......................................................................... 29

Time Settings ........................................................................................................ 29

Initialize ................................................................................................................. 30

System Log ........................................................................................................... 31

Advanced Application ............................................................................................. 31

Android and iPhone Mobile Application Set Up ............................................... 31

Mobile Phone Browsing ......................................................................................... 32

Using Other Web Browsers to visit the device .................................................... 32

Multiple Device Monitor System (MDMS) ............................................................ 34

Supplementary Section ............................................................................................ 35

Port Forwarding References ................................................................................. 35

Aztech DSL1015EW(S) / DSL1016EN(S2) ........................................................... 35

Aztech DSL7000GRV(S) ...................................................................................... 36

Aztech DSL7000GR(SME) ................................................................................... 37

Linksys E1500 Router............................................................................................ 38

DLink DVG-N5402SP ............................................................................................ 39

2wire 2700 HGV-2 ................................................................................................ 40

5

User Manual

About the Product

The IP Camera combines a high quality digital video camera with network

connectivity and a powerful web server to bring clear videos to your mobile

phone/desktop from anywhere on your local network or over the Internet.

Your IP Camera package should contain the following items. If any of the listed items

are missing, please contact your reseller from where you purchased the camera for

assistance.

The Package includes:

WIPC410 ENHANCED HD

Resource CD Utility with

User Manual

5V Power Adapter

Easy Start Guide

LAN Cable

Wireless Antenna

Mounting Bracket

Warranty Policy

6

User Manual

Function and Features

Experience Real-Time HD monitoring anytime you need it and anywhere you are with

your smartphones 3G/4G/Wi-Fi connection through the WIPC410 Enhanced HDs

Aztech IP Cam app: a smartphone app that you can easily download on Google

Play or Apple App Store which enables you to quickly setup the WIPC410 Enhanced

HD, control the Pan/Tilt/Zoom feature of the camera, and view Real-time

High-definition videos and images captured by this excellent companion.

High Definition Surveillance for your Home. The Aztech WIPC410 Enhanced HD

provides commendable high-definition audio and video recording, with

optional image captures which will excellently comply with your home

monitoring needs

Remote Accessibility Anytime and Anywhere. Supplemented with the Aztech IP

Cam App for smartphone / tablet accessibility, the WIPC410 Enhanced HD offers

constant camera access anytime or anywhere through your smartphone or

tablet as long as you have an active 3G / 4G / Wi-Fi connection on your device.

For desktops, the Multiple Device

Monitoring System (MDMS) is provided. Pan, Tilt, Zoom Features for Camera

Control. Empowering you further with a complete area surveillance experience,

the WIPC410 Enhanced HD is also equipped with a 355 horizontal pan, a 20

vertical tilt, and 3 x digital zoom features to ensure constant control in selecting

the room areas view through your smartphone.

Dual Audio Feature for Area Intercommunication. As an added feature, the

WIPC410 Enhanced HD allows you to communicate with the people on the

monitored area. It sports a built in microphone and speaker that can both send

and receive audios sent from the Aztech IP Cam app, or through a desktop with

an external microphone with an MDMS installed.

Round the Clock Reliability. Capable of providing round the clock surveillance,

WIPC410 enables you to continuously monitor your most treasured possessions or

even your loved ones for as long as you want. It is equipped with an alarm

notification which collaborates with its motion detector to identify movements

within its monitored area while sending email notifications upon detecting

movements with an attached scene-screenshot.

Easy to Setup and Use. Aztech WIPC410 Enhanced HD, involves a simplified

3-step setup in setting up the surveillance with your smartphones, a feature

made possible through the Aztech IP Cam app downloadable through Apple

App Store and Google Play.

7

User Manual

Appearance and Interface

Appearance

Interfaces of the WIPC410 ENHANCED HD

1. 5V DC Power Input. Allows you to connect the Power Adapter. Its output

should be 5V in as seen on its specifications.

2. WPS Button. Press this button for 2 seconds to enable the WPS connectivity of

the WIPC410 ENHANCED HD to a wireless router that has a WPS feature. You

may have to browse your routers instruction manual to know how many

seconds it has to be pressed for a successful WPS pairing.

3. Ethernet Port: The WIPC410 ENHANCED HD uses a Self-adaptive Ethernet port.

The camera is capable of connecting to all kinds of network devices such as

hub, router, switch, etc.

4. SD Card Slot. Capable of supporting a 64GB SD/TF card for storing the alarm

video, pictures, timing snapshot and recording;

5. External Mic. Audio input socket is designed for connecting external

microphone or line-in audio signal. Please refer to 7.1.2 and select right

settings.

6. External Speaker. Audio output socket is for line-out audio player, such as

headphones, speakers, etc.

8

User Manual

LAN Port LED Behaviors

Network Connection

The IP Camera can be connected to another PC by connecting it to a router, a

switch, or a hub, to establish network connectivity as seen above.

LABEL STATE DESCRIPTION

LED 1 Blinking

OFF

Actively transmitting/receiving data.

Device is not connected to the network.

LED 2 Steady

OFF

A LAN Cable is connected to the LAN port.

There is no LAN cable connected to the LAN Port.

9

User Manual

Connection Instructions

Before visiting the IP Camera, you must first connect it to the Network. Plug it to

a power outlet, and check if the light of the LAN port is normal to make sure all

of the communication links are functioning properly. The connection method

can be seen on the previous page. In addition, ensure that the following items

below are satisfied:

1. IP Camera-1 and IP Camera-2 are connected separately to 2 different

LANs.

2. And these 2 LANs are already connected to the Internet. In order to get the

LANs connected to the Internet, ensure that the router used in the network

has an active internet connection.

3. PC-3 is connected to the Internet.

Visiting the IP Camera

To visit the IP Camera, you must first configure some of your IP Cameras IP

settings.

1. The PC and IP Camera are in the same LAN. If you want to use this PC to visit

the IP Camera, you need to make sure that each devices IP address

belongs to the same segment. Otherwise you may have to reset the IP

Cameras IP address.

For example, if the IP Camera-1s IP address in the image above is

192.168.1.139 (at the segment of 192.168.1.x), while the PC-1s IP address is

192.168.0.175 (at the segment of 192.168.0.x), you will not be able to visit the

IP Camera through PC-1. You must first change the IP Camera-1s IP address

to 192.168.0.139 (or any IP address within the 192.168.0.1 to 192.168.0.254

except 192.168.0.175).

2. The PC and IP Camera are in different LANs, but they are all connected to

Internet. For the IP Camera-1 and PC-2, if you want to visit IP Camera-1

through PC-2, you must first ensure the following:

Ensure that you can visit IP Camera-1 through PC-1 and then do port

forwarding of the IP Camera on Router-1.

The PC-2s visit application could be sent through router-1 to IP

Camera-1. Normally, PC-2 could only send the information to router-1.

However, if you do not configure the port forwarding settings of the IP

Camera-1 on router-1, PC-2 would not be able to visit IP Camera-1.

10

User Manual

Visit IP Camera from LAN

Set IP Address

The IP addresses of each IP Camera and PC should be on the same segment or

IP range. As explained earlier, you would not be able to access IP Camera-1.

To change the IP address of IP Camera-1:

1. Run the WIPC410 ENHANCED HD Utility in the CD.

2. Click Find button, and then select the IP Camera on the Equipments list to set

the IP Cameras IP address.

Additional Notes:

If a firewall is enabled in your PC, a popup window will ask for your

confirmation if you would be blocking or allowing the software to run.

Click Allow to proceed.

IP Cameras by default use a dynamic IP Address and an HTTP port 8081. If

you do not have this software, you could also press down the reset

button of the IP Camera (found at the bottom of the camera) to reset it

to its default factory settings. You can then use the default IP address to

visit the IP Camera.

If you wish to access the camera remotely using a cameras External

Access address, simply :

a. Select the camera that you want to access remotely on the

Equipments list.

11

User Manual

b. Click the Get button (beside the External Access field).

c. On the Validate Authentication window, enter admin as its

username and password.

d. Copy the URL generated on the External Access field. This

link would allow you to access the camera even when not

on the same LAN Network.

e. You may also do steps a to d on your other IP cameras.

NOTE : For the external access address / DDNS to work, a

successful port forwarding setup is needed.

Setup Instructions

1. Click the Find button and select the WIPC410 ENHANCED HD camera from

the Equipment list seen on the left side of the utility. The required fields on the

General tab would automatically be filled up by the selected cameras

device details.

2. Click the Open button beside the Internal Access field, and you will

automatically be redirected to the Web User Interface of your WIPC410

ENHANCED HD.

Visit IP Camera

If you are using Internet Explorer or a compatible browser to access the camera

for the first time, you will be required to install ActiveX before viewing the video.

For first time visits, please click the Download ActiveX link.

A dialog box as seen below will popup. Click Run and it will automatically

12

User Manual

download and install the ActiveX plugin.

After the ActiveX installation, you will be redirected to the Home page of your IP

Camera. Simply click View to start viewing.

NOTE: For higher versions of Internet Explorer (IE), upon installing the

SEClientOCX_Setup.exe, ensure to view the webpage using the Compatibility

View. This can be done through the Internet Explorers settings.

Web User Interface

Menu

There are 2 kinds of menu (1) is Main Menu, and (2) is the Sub Menu. The Main

Menu lies at the top of the interface, including View, Media, Network, Alarm,

Advanced and System. The Sub Menu lies on the right side of the Web User

Interface, displaying different options for each main menu.

13

User Manual

Video Displaying Area

The video displaying area corresponds to the resolution of the IP Camera. The

higher the resolution is, the larger the displayed area will be. If the motion

detection feature is enabled, the displaying area will show a pane calling the

users attention if movements were detected on the surveillance area.

1. Displays Connection Status. Displays the current status of the IP camera.

2. Record Status. If you click the Record button on the submenu, the record

status will show Rec to show that the current video is being recorded. Clicking

the Record button again will stop the recording.

3. Zoom Out Button. Zooms out of the previewed area.

4. Zoom In Button. Zooms in on the previewed area.

5. File Saving Path Setting. Allows you to browse a file saving path where the IP

Camera will save the recorded videos and snapshots.

6. Talk-back Button: Allows you to do an audio broadcast through the IP

Cameras built-in speaker or an external speaker connected to the camera.

7. Audio Play Button: Allows you to play audio from the monitored area.

SD Card

When an SD Card is inserted, click the Browse submenu, the pop-up page will

display the content of the SD Card similar to the directory below. If there are no

SD cards inserted on the camera, a link to the Sign in page would be provided.

In the figure above, the text inside the [ ] is the catalog info. Click sub catalog to

browse the recorded images and videos. The images will be displayed when you

click them and the videos will be downloaded and played by the video player

in your computer automatically.

Additional Notes:

Insert SD Card first before turning ON the IP Camera.

14

User Manual

Proper SD Card Placement metal contacts facing on top.

Capture

Allows you to take photos of the current video and store the image at the present

path.

Record

Allows you to record videos with audio and store it using the present path. When

recording, there will be an indicated symbol in the status of video display area to

show you it is recording. Click the Record button again to stop recording.

Playback

Allows you to play videos that you have recorded. Upon clicking the Playback

button, a popup player which could play the video stored on your PC disk will

appear.

,

These buttons are (1) play, (2) stop, (3) Previous recorded video, (4) Next

recorded video, and (5) open a Recorded video. Please click the button of open

the recorder file first, and select the file you want to play.

The Pan/Tilt Control

The Pan/Tilt control area allows you to control the cruise of the Pan/Tilt of your IP

Camera through directional arrow buttons

(Up/Down/Left/Right/Centre/Stop/Left-right cruise/Up-down cruise).

When the IP Camera turns to some position, you can click the Set Button. When

you continue to control the Pan/tilt to turn to other position, you could click the

Call button and the Pan/Tilt will go back to its pre-position.

15

User Manual

Notice (for Initial Use)

Please change the following settings for initial use:

1. You may have to change the initial passwords of admin, user, and guest. Their

initial passwords are respectively admin, user, guest.

2. You may also have to set the current System Time.

Visit IP Camera from WAN

Port Forwarding

Ensure PC-1 can visit IP Camera-1. Before the computers in WAN (PC-2, PC-3)

can visit IP Camera-1, you must first put the IP Camera -1 into WAN. You can set

Port Forwarding on Router-1 to put IP Camera-1 into WAN.

1. Open the Router Setting interface on PC-1. The interfaces for different routers

are different, and the Port Forwarding settings are different.

NOTE : You may have to refer to your routers user manual to finish this part.

2. For most routers, the Port Forwarding option can be found under Setting /

Firewall Interface. Fill in the IP address and Port of IP Camera-1 into the

corresponding blank.

3. Select Status option and remember the WAN IP address.

4. Enter the IP address in the browser of PC-1. If IP Camera-1 can be visited via

PC-1, the port forwarding is successful. PC-2 and PC-3 should now also be

able to access IP Camera-1.

Additional Notes:

16

User Manual

The WAN IP address is allocated by your ISP. Ensure that it is an available WAN

IP address. Since the WAN IP address may lack, many WAN IP address are

available within a limited area. If PC-2 and PC-3 are not in this area, these

devices would not be able to access the IP camera.

If a User wants to put several IP Cameras into WAN, every device should have

Port Forwarding set. In order to distinguish these devices, each device should

be assigned on a different port. If the port of the device is not 8081, you

would have to add the port to the IP address separated by a colon (:)

whenever you will be accessing the IP Camera (e.g. http://202.96.82.177:81)

DDNS

As explained earlier, Router-1 will get the WAN IP address via ADSL. The WAN IP

address constantly changes, which is why the IP address cannot be confirmed.

In instances such as this, the Dynamic Domain Name Server (DDNS) would be of

great use. IP Camera-1 will update its IP configuration to the DDNS at regular intervals.

The DDNS would then recognize the WAN IP address of the Router-1 which is

connected to IP Camera-1.

The WAN IP address can be searched on DDNS by its domain name (e.g.

Aztechcamera1.com). The domain name will serve as the substitute of the dynamic

IP address. If the device cannot be visited through its IP address, the domain name

would also be unavailable.

17

User Manual

Manufacturers Domain Name

Device manufacturer has established a DDNS and allotted a dynamic domain

name to every device. The domain name has been integrated into devices

during production. For example, if you enter the domain name seen below, your

web browser will connect the device and display the IP address.

Additional Notes :

The domain name is made possible through port forwarding. The domain

name will change into the IP address and port number of the device when

visited through its domain name.

If the device can be visited by IP address but cant be visited by

manufacturers domain name, please check the DNS info if it is available or

not and make sure that the DNS setting is the same with the DNS setting of PC

in LAN.

Third Party Domain Name

You may also use other third party DDNS, such as www.3322.org. You may apply

for a free domain name from this website. All you have to do is to correctly enter

the information required, and the domain name can now be used.

The domain name will be displayed in the web browser whenever you are visiting

the IP Camera. However, if the port is not 80, the port number should be added

after the domain name and colon. Example: http://ipcam.3322.org:81

18

User Manual

Other Settings

Media

Video Settings

Resolution. Use 1280 X 960 Resolution, Bit Rate is 2048 kbps and Frame

Rate is up to 30 fps. The higher the resolution or quality of the picture, the

higher bit rate requirement and bandwidth consumption will be. A high

bit rate allows the generation of higher image qualities.

NOTE : In setting the frame rate, bandwidth must be taken into

consideration. With a low bandwidth, a high frame rate would result into

uneven results. With limited bandwidths, it is suggested to set the frame

rate to 15fps. High bandwidth limits can set the frame rates to its highest

setting.

Overlay Options. Through this setting, you can add the Time and

Camera Name to the images captured by your IP Camera. You can also

assign a camera name for your WIPC410 Enhanced HD camera as

preferred.

19

User Manual

Audio Settings

Audio Options. Allows you to define values for input and output volumes

(with 100 being the highest value). This also allows you to enable or

disable the Built in speaker feature.

First / Second / Third Streams. Allows you to enable or disable the audio

capture function, and select the audio type which best suits your

bandwidth limit for each stream.

Image Settings

Live Camera Feed. Provides live camera preview which you can easily refer

to upon adjusting the settings.

Color Adjustment. Allows you to adjust brightness, saturation, and contrast,

20

User Manual

by either sliding the glide bars of the corresponding setting, or by entering

the value that you wish on the corresponding setting.

Image Display Adjustment. Allows you to set the monitored areas vide view

into Mirror or Flip.

IR LED Control and Night vision mode. Allows you to enable or disable IP

Camera features which are useful in either night time or insufficiently

lighted areas. These are suggested to be set to AUTO and turned ON at

all times.

Network

Basic Network Setting

LAN Setting. The default LAN settings are set to Dynamic, with its DNS

Configuration type set to DHCP.

HTTP Port. Allows you to specify a port the IP Camera will use in

transferring the data going to the web server.

WIFI Setting

21

User Manual

The wireless settings page is as shown above. You can click the Search button,

and it will show you a list of WIFI networks detected. By selecting one SSID, all

data fields will be filled up automatically (e.g. SSID, encryption algorithm etc.).

All you have to do is to enter the wireless password in the Key and the Re-Type

Key field correctly. Click the Check button to check if the parameters entered

are correct. You may then click the Apply button to apply the settings.

Note: Before you set up wireless parameters, ensure that the device is

connected to the Internet. After connecting successfully, reboot the device for

the wireless settings to take effect. Upon rebooting the device, it will take 30

seconds before the camera will automatically pan and tilt by itself. Another (2)

minutes is needed for the camera to successfully establish a wireless connection

to the router.

Remote Access Setting

Manufacturers DDNS and Third Party Dynamic DNS. Please refer to the DDNS

contents of this User Manual.

UPNP. UPNP stands for universal plug and play. If you enabled UPNP, once the

IP camera is connected into the LAN, it will communicate with the router of

the LAN. It will request the router to open a port to forward its own port.

NOTE : Before using UPNP function, please ensure that the routers UPNP has

also been enabled. It is also important to know that some routers do not

support a UPNP feature. If it does not have the said feature, it is suggested to

set a Port Forwarding Function on your router.

Internet IP Address (WAN IP Test). Click the Show button, it will show you

another page displaying the WAN IP address when it is connected to the

Internet.

22

User Manual

Alarm

Motion Detection Setting

Allows you to monitor movements made on the monitored area. Four area

frames can be enabled/disabled, managed, resized, and distributed across the

monitored area window. Movements detected within each window would be

able to trigger an alarm. Detection sensitivity settings for each corresponding

area window can also be configured in this area.

23

User Manual

Sound Alarm

Allows you to enable or disable the Sound Alarm feature and configure the

Sensitivity settings of the sound alarm.

Alarm

Allows you to set how the IP Camera will respond when the alarm is triggered.

You can set it to any of the responses enumerated below.

Snapshot a live picture of the site on the SD card.

Record a 30-second video on the SD card (including 5 seconds long video

before the alarm was triggered).

Send the recorded video on the SD card to the FTP server (You would have

to enable Save the video on SD card function, and ensure that an SD

card is inserted first).

Enable external alarm function and set the time.

Send alarm info to the alarm server.

Send alarm info to E-mail.

24

User Manual

Alarm Time Setting / Schedule

NOTE: You may need to adjust the system time first before you can fully utilize this

area.

Example below: Alarm set is Monday, Wednesday, Friday at 3PM to 6:00PM

0 - 23 denotes standard format of time (24 hour clock)

Left box indicates first 30 minutes / half hour ( 00:01 00:30)

Right box indicates last 30 minutes / half hour (00:31-01:00)

NOTE: The IP Camera will trigger alarm only on the time set.

25

User Manual

Advanced

User

There are three account levels of authorization: Admin, User, and Guest.

The Admin account has the highest authority and can perform all possible

changes on the IP Cameras settings.

The User account can only operate the IP camera but it cannot do any

changes to its current settings.

The Guest account can only watch videos

26

User Manual

Auto Capture Setting

Allows you to configure the Auto capture settings of your IP Camera such as the

SD Card/FTP second intervals, and the enabling/disabling of image saving in SD

Card/FTP Server.

By ticking the save picture on the SD card checkbox, the IP Camera will take a

snapshot of the monitored area using the interval declared on the TF/SD Card

field (e.g. every 60 seconds)

FTP Setting

In order to use FTP function, you should first set a valid username and password of

your FTP Server. Storage and the authority to write and create sub-category into

it is also required for the FTP Auto Capture Setting to work.

27

User Manual

E-mail Setting

Allows you to configure the email settings which will be used if the alarm

response is set to email alarm. As seen below, the blanks which have been filled

with info should be correct. If any info is not filled properly the setting will fail.

Before setting these parameters, please refer to the settings of your Outlook

Express.

Multiple Settings

Allows you to configure the settings of each cameras basic configurations (e.g.

camera name, IP Address, etc) on the LAN Network.

28

User Manual

Schedule Recording

Allows you to configure the recording settings of each stream, including the

recording properties such as its duration, and the days, and selected

hours/minutes wherein video will be recorded.

Schedule Recording

Allows you to configure the PTZ speed, tand the enabling/disabling of the auto

center feature during self-check.

29

User Manual

System

Device Information Checking

Displays your IP Cameras basic device properties such as its current connection

status, its MAC address, the Subnet Mask and its default gateway, the primary

and secondary DNS, the running duration time, and the SD Card status.

NOTE : The device supports a maximum of 64GB SD card. Please format the SD

card to FAT32 before using the card on Camera. Please check if the SD Card

matches the camera or not before purchasing the SD Card.

Time Settings

Allows you to identify the NTP Server the IP Camera will synch with. There are

three options in setting your IP Cameras time and date: (1) manually, (2)

keeping the same time and date settings of your computer, and (3) is getting it

from the NTP server.

30

User Manual

Initialize

Reboot. Allows you to restart the device. The device reboot will take less than

five minutes to complete.

Restore Factory Default. Allows you to restart the IP Camera using all of the

default settings it has. By clicking the Confirm button, all changes made on

the IP camera will be replaced by its default settings.

Backup Settings Data. Allows you to backup all present settings in your IP

Camera.

Restore Settings Data. Allows you to use the previously saved backup file that

you saved. Simply click the browse button, locate the backup file, and click

confirm.

Firmware Upgrade. Allows you to upgrade the current firmware of your IP

Camera. Simply click the browse button, locate the firmware file, and click

confirm. After the upgrade, the IP Camera will restart with the upgraded

firmware loaded.

NOTE: It is important to ONLY use firmware OFFICIALLY RELEASED by Aztech.

These can be downloaded on the Aztech Support Site

(www.aztech.com/support).

31

User Manual

System Log

Displays the current activities made in your IP Camera, such as logins and

logouts of various devices, and other device oriented activities.

Advanced Application

Android and iPhone Mobile Application Set Up

1. Download and Install Aztech IP Cam App at Google Play Store or

iTunes/AppStore. You may scan the QR Code found at the Packaging Box to

automatically search for the app.

2. Click Add Camera.

3. Enter the UID. This information is found at the bottom label of the Camera. You

may scan the UIDs QR Code or Search the Camera from the Local Area

Network. The UID is unique for every device.

4. Enter the Security Code/Password. The Default Password is admin, then Click

OK/Save to view the Camera.

5. You may also edit the Cameras Settings, click Edit Camera, and then go to

the Advanced Setting to change the Security Code, Video Setting and Wi-Fi

Setting.

6. It is highly recommended to change the Security Code during Initial Set Up.

Click on Modify Security Code, type the Old Password then Enter the New

Password.

7. To connect your camera via Wireless Setting, click on Wi-Fi Setting then go to

Manage Wi-Fi Networks.

8. You may select on which wireless network to connect then key-in its

Password.

9. After a successful connection, you may now disconnect the LAN Cable from

your camera and do a power reboot on the device.

NOTE : For screenshot details please refer to Easy Start Guide copy included in

32

User Manual

the Package, Please note that a maximum of eight (8) IP Cameras can be

added in the Mobile App.

Mobile Phone Browsing

After connecting to the network, you can view the IP Cameras monitored area

through its mobile phone. The device will then send MJPEG picture to the mobile

phone, using the image resolution preferred (mentioned on Chapter 7.1.1).

Viewing ways are found below:

1 http://IP:Port/mobile.html, for example:

http://58.61.54.177:1025/mobile.html

http://test.3322.org:1025/mobile.html

Smartphone (like iPhone and Android etc.) can use this Mode to visit the IP

Camera. If your device is unable to visit the IP Camera, you have to

download and use an opera mobile browser.

2 http://IP:Port, for example:

http://58.61.54.177:1025

http://test.3322.org:1025

Only iPhone can use this mode to visit.

Using Other Web Browsers to visit the device

Using a web browser with IE kernel, you must first download ActiveX. Using other web

browser like Safari or Firefox, it will use QuickTime to play.

A. The settings to use Firefox or Safari in Windows OS

To view videos on Firefox and Safari:

1. In Windows OS, it will remind the users for the installation of Quicktime.

After installation, start the Quicktime program.

2. Access the QuickTime Preferences dialog box from Edit Menu.

3. Click Advanced then select custom.. in the Transport Setup. A

Streaming Transport dialog box will popup.

4. Select HTTP for transport protocol and 80 as its port ID then click

ok.

5. Please be back to Transport Setup to change Custom.. to Auto.

6. Click ok at the bottom. You can now view videos through Firefox or

Safari now.

33

User Manual

B. The Settings to Use Safari in MAC OS

When using MAC OS, since QuickTime is the default software, you only

need to go to the Utilities folder under the Applications folder, start

command line program (Terminal program), and input the command

below:

qtdefaults write TransportSettings HTTP 8081

You can now open this in Safari to view the camera. If you cant view the IP

Camera from safari, please try http://ip:port/mobile.html .

34

User Manual

Multiple Device Monitor System (MDMS)

Multi Device Monitor System is a free software offered in conjunction with the

WIPC410 ENHANCED HD which allows several IP Cameras on the LAN and WAN

to be browsed at the same time. The software also supports snapshots, video

recording and so on.

NOTE: The MDMS Software can be downloaded on the Aztech Support Website

(www.Aztech.com/support)

35

User Manual

Supplementary Section

Port Forwarding References

This section provides procedure in setting the Port Forwarding Function of your

router. Please take note that the IP Camera must be connected to the Router

and the Internet Connection is up. After it has been configured successfully, user

may now be able to access the IP Camera remotely using another computer.

Aztech DSL1015EW(S) / DSL1016EN(S2)

1. Open your browser.

2. Type-in 192.168.1.254 on the address bar and then press Enter.

3. Go to Firewall Configuration, click Port Forwarding

4. Select Server Name if application is available in one of the option and

fields will auto-populate or select Custom Server if you enter the name

manually

5. Enter the Server IP address of the computer on your local network that

you want to allow the incoming service

6. For External Port Start and External Port End, enter the port or ports that

you want to open. If you want to open one port, enter the same port in

both boxes

7. For Protocol, select TCP.

8. For Internal Port Start and Internal Port End, enter the port of ports that

you want to open. If you want to open one port, enter the same port in

both boxes

36

User Manual

9. Click Save/Apply

Note: Remaining numbers of entries that can be configured is up to 32.

To Remove:

1. Select the Server Name by clicking on Remove check box

2. Click Remove button.

Aztech DSL7000GRV(S)

1. Open your browser.

2. Type-in 192.168.1.254 on the address bar and then press Enter.

3. Go to Firewall Configuration, click Port Forwarding

4. Select Server Name if application is available in one of the option and

fields will auto-populate or select Custom Server if you enter the name

manually

5. Enter the Server IP address of the computer on your local network that

you want to allow the incoming service

6. For External Port Start and External Port End, enter the port or ports that

you want to open. If you want to open one port, enter the same port in

both boxes

7. For Protocol, select TCP.

8. For Internal Port Start and Internal Port End, enter the port of ports that you

want to open. If you want to open one port, enter the same port in both

boxes

9. Click Save/Apply

Note: Remaining numbers of entries that can be configured is up to 32.

37

User Manual

To Remove:

1. Select the Server Name by clicking on Remove check box.

2. Click Remove button

Aztech DSL7000GR(SME)

1. Open your browser.

2. Type-in 192.168.1.254 on the address bar and then press Enter.

3. Go to Firewall Configuration, click Port Forwarding

4. Select Server Name if application is available in one of the option and

fields will auto-populate or select Custom Server if you enter the name

manually

5. Enter the Server IP address of the computer on your local network that

you want to allow the incoming service

6. For External Port Start and External Port End, enter the port or ports that

you want to open. If you want to open one port, enter the same port in

both boxes

7. For Protocol, select TCP.

8. For Internal Port Start and Internal Port End, enter the port of ports that you

want to open. If you want to open one port, enter the same port in both

boxes

9. Click Save/Apply

Note: Remaining numbers of entries that can be configured is up to 32.

To Remove:

1. Select the Server Name by clicking on Remove check box

38

User Manual

2. Click Remove button

Linksys E1500 Router

1. Open your browser.

2. Type-in 192.168.1.1 on the address bar and then press Enter.

3. Type correct Username and Password if required.

4. Go to Applications & Gaming, click Single Port Forwarding

5. Select Application Name if application is available in one of the option and

fields will auto-populate. Select HTTP.

6. For External Port Start and External Port End, enter the port or ports that you

want to open. If you want to open one port, enter the same port in both

boxes

7. For Protocol, select TCP.

8. For IP Address, input the IP Address of your camera.

9. Tick Enabled to activate the setting.

10. Click Save Settings.

39

User Manual

DLink DVG-N5402SP

1. Open your browser.

2. Type-in 192.168.0.1 on the address bar and then press Enter.

3. Type correct Username and Password if required.

4. Go to Advanced Tab, click Firewall and DMZ at the left column.

5. Under Port Filtering, Select WAN Connection (Internet).

6. For WAN Port Range, enter the port or ports that you want to open. If you

want to open one port, enter the same port in both boxes (8081)

7. For Protocol, select TCP.

8. For LAN Host IP Address, input the IP Address of your camera.

9. For Server Port Range, enter the port or ports that you want to open. If you

want to open one port, enter the same port in both boxes (8081)

10. Enter Name in the Remarks

11. Click Apply to save settings.

40

User Manual

2wire 2700 HGV-2

1. Open your browser.

2. Type-in 192.168.1.254 on the address bar and then press Enter to enter the

Web User Interface Page of your router.

3. Click Connection Status, this will launch the configuration page.

4. Select Home Network tab then click Edit Firewall Settings. Take note of the

WIPC410 ENHANCED HD Wired Connection Icon.

41

User Manual

5. Click Allow Individual Application (s) and select User-Defined from the drop

down box then click Add a new user-defined application.

6. On the Application Name box input the IP Cameras Name, select TCP on the

Protocol option. Input 8081 under the Port (or Range) field then click ADD

DEFINITION.

42

User Manual

7. WIPC410 ENHANCED HD IP Camera Configuration will be added on the

Definition List Table. Click Back to return to the Firewall Settings.

8. Click Home Network again then click Edit Firewall Settings on the WIPC410

ENHANCED HD Wired Connection.

9. Under the All Application box select WIPC410 Enhanced HD then click ADD for

43

User Manual

the application to be added on the Hosted Application list. Click DONE for

the settings to take effect.

Manualsnet FAQs

If you want to find out how the WIPC410 Enhanced HD Aztech works, you can view and download the Aztech WIPC410 Enhanced HD Camera User Manual on the Manualsnet website.

Yes, we have the User Manual for Aztech WIPC410 Enhanced HD as well as other Aztech manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Aztech WIPC410 Enhanced HD. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Aztech WIPC410 Enhanced HD Camera User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Aztech WIPC410 Enhanced HD Camera User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Aztech WIPC410 Enhanced HD Camera User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Aztech WIPC410 Enhanced HD Camera User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Aztech WIPC410 Enhanced HD Camera User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.