Contents

AVer C20i Charge Cart User Manual PDF

1 of 20
1 of 20

Summary of Content for AVer C20i Charge Cart User Manual PDF

C20i

User Manual

WARNING

ALWAYS FOLLOW SAFETY PRECAUTIONS

NEVER climb, sit or stand on the

C20i cart.

ONLY ADULTS should move the C20i cart.

To reduce risk of electric shock

ONLY use indoors.

DO NOT allow anyone to sit, stand or climb on the C20i cart.

DO NOT lift the C20i cart.

DO NOT block the ventilation holes used for air circulation.

DO NOT overload objects on the C20i shelves. (work platform maximum

loading = 45kg / 99.20lbs; each pull-out shelf maximum loading = 22.7kg

/ 50.04lbs)

Before moving C20i cart, disconnect the power from the wall outlet.

While moving C20i cart, make sure the power cord is secured and tightly

wrapped.

FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Federal Communications Commission Statement NOTE- This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected. Consult the dealer or an experienced radio/television technician for help.

Class A ITE Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B ITE limits. Such equipment should not be restricted in its sale but the following warning shall be included in the instructions for use:

Warning - This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

European Community Compliance Statement (Class A) This product is herewith confirmed to comply with the requirements set out in the Council Directives on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility Directive

2014/30/EU.

Warning - This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures to correct this interference.

DISCLAIMER No warranty or representation, either expressed or implied, is made with respect to the contents of this documentation, its quality, performance, merchantability, or fitness for a particular purpose. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice. In no event will AVer Information Inc. be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages.

TRADEMARKS AVer is a trademark owned by AVer Information Inc. Other trademarks used herein for description purpose only belong to each of their companies.

COPYRIGHT 2016 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitted in any form or by any means without the prior written permission of AVer Information Inc. is prohibited. All information or specifications are subject to change without prior notice.

The mark of Crossed-out wheeled bin indicates that this product must not be disposed of with your other household waste. Instead, you need to dispose of the waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. For more information about where to drop off your waste equipment for recycling, please contact your household waste disposal service or the shop where you purchased the product.

Contents

Package Contents ................................................................................................ 1 

Dimensions ........................................................................................................... 1 

Diagram ................................................................................................................ 2 

LED Indicators ...................................................................................................... 3 

Secure the Cart ..................................................................................................... 3 

Door Lock ............................................................................................................. 4 

Cable Management .............................................................................................. 5 

Charging Cart ....................................................................................................... 7 

Intelligent Timer .................................................................................................... 8 

Firmware ............................................................................................................... 8 

Troubleshooting .................................................................................................... 9 

Specifications ...................................................................................................... 10 

Service and Warranty .......................................................................................... 11 

1

Package Contents

The following items are included in the package. Please check if each item is

available before using.

User Manual

Power Cord

C20i Cart

Dimensions 68.8cm(27.09) 63.7cm(25.08)

10 6c

m (4

1. 73

)

2

Diagram

1 2

4

3

5 6

78

9

Front Side Back

1. Work platform 7. Auxiliary outlets 14. Ventilation holes

2. Handle 8. LED panel 15. Door lock

3. Ventilation holes 4. Door lock 5. 5 Locking caster

9. Mounting points for Access point holder(optional)

16. Security hook

6. 5 Caster 10. Power cable wrap brackets

11. USB firmware upgrade port

12. Power switch

13. Power inlet

3

LED Indicators

LED Status

Power x1

1. Solid Green: ON 2. Flashing Orange: Current

Overload 3. Flashing Red: Abnormal

Failure (Contact Support)

Device Status x2 1. OFF: No Charging 2. Solid Blue: Charging

Secure the Cart

Use to secure cart

4

Door Lock

Optional

Door lock open

[Note] The shackle dimension of front and back doors are limited to 8mm (0.31).

5

Cable Management

[Note]

1. It is recommended to use cable ties (optional) to secure and manage cables.

2. It is recommended to allocate 2 human resources for efficient device cabling.

Back 

AC-end

DC-end

1. Open the rear door.

2. Place the power adapter in to the individual adapter compartment.

3. Pass the DC-end of the adapter cable to the front of the cart through the space

provided.

4. Plug-in the AC-end power cord to the corresponding power AC socket.

5. Secure the bundle cables with cable tie or zip-tie (not supplied).

6

Front 1. Open front doors

180

2. Release the partition locking piece.

3. Route the adaptor DC-end cable. Along with the V-shape routing groove.

7

4. Snap the locking piece to firmly secure the DC-end cable.

5. Place the mobile device into the bay.

6. Plug in the DC-connector to the mobile device. 

Charging Cart

Wall outlet

Connect power cord to C20i cart and wall outlet

Set the power switch to ON to begin charging

2

1

[Note]

1. Set the power switch to the OFF position before plugging the cart to wall outlet.

2.* Auxiliary outlet and power inlet type may vary as they are country dependent.

Intelligent Timer

20 bays for C20i are divided into 2 zones (10 bays for each zone).

Zone 1

Zone 2

Firmware

Firmware can be upgraded from the external USB type-A port via typical USB

thumb-drive. Please follow the steps below to upgrade your Firmware:

1. Prior to updating, make sure the USB thumb-drive is formatted to FAT or FAT32

filesystem

2. Copy the Firmware binary file ( *.bin) to USB thumb-drive

3. Turn OFF C20i and then insert the USB thumb-drive

4. Turn ON C20i and the Firmware upgrade will update automatically. The Power

LED will cycle through the following display RED AMBER GREEN

RED.

[Note] Status LEDs are OFF during the upgrading.

5. Once the Firmware upgrade is completed, the Power LED will still display RED

AMBER GREEN RED in cycle, but the charging status LED's will turn

ON.

6. Turn OFF C20i, remove the USB thumb-drive.

[Note]

C20i supports USB thumb-drive for the following criteria:

1. FAT or FAT32 filesystem (need to format if necessary).

2. 32GB capacity maximum.

3. USB 2.0 high speed interface.

Troubleshooting

Q: Why are all of my devices plugged in but not charging? A: 1. Make sure power cords are undamaged.

2. Make sure power cords are firmly inserted into the available socket with

stable current.

3. Make sure the power plug and current consumption are compliant with your

country specification standards. Q: My cart's main power cord or cart components are damaged. Are they

covered under warranty? A: We provide a 10 year warranty on the cart and tray, and 5 years warranty on the

electrical components. Q: How do I know if my devices will exceed more than the allotted current? A: Have a qualified electrician verify the current consumption of your devices.

Perform the test with devices installed and batteries discharged. Q: When I plug in the device it trips the circuit breaker. What is wrong? A: You may have other equipment or appliances sharing the same circuit that is

causing a circuit overload. Have a qualified electrician check that adequate

power is available in the circuit.

10 

Specifications

Model C20i

Capacity Up to 20 Devices (2 shelves, 10 bays per shelf)

Supported Devices Laptops/Chromebooks/Tablets up to 16

AUX Outlets 2

LEDs Status Indicators Status LED (x2): Solid Blue when charging

Charging Type AC Intelligent Charging

Power Specification AC IN: 100~120V, 50/60Hz,12A Power Strip (x20 ports): 100~120V, 50/60Hz,8A Outlet( 2 ports): 100~120V, 50/60Hz, 4A

Security

Front Doors: 3-point locking mechanism with padlock hole

Rear Doors: 3-point locking mechanism with padlock hole

[Note] Padlock is not included in the package

Casters Four 5 casters: two are lockable

Intelligent Charging Yes

Working Temperature 0o~30oC

Working RH% 10%~90%

Storage Temperature -40oC~60oC

Storage RH% 5%~95%

Warranty 10 years cart and tray 5 years electrical components

Cart Dimensions (W x D x H)

68.8 (W) x 63.7 (D) x 106 (H)cm 27.09(W) x 25.08(D) x 41.73(H)

Slot Dimensions for 16 bays (H x W x D)

33(H) x 4.375(W) x 41.9(D)cm 13"(H) x 1.722"(W) x 16.5"(D)

Slot Dimensions For 20 bays (H x W x D)

33(H) x 3.615(W) x 41.9(D)cm 13"(H) x 1.423"(W) x 16.5"(D)

Weight without Devices 144.62lbs (65.6kg)

11 

Service and Warranty

All of our products come with a quality and safety assurance.

For customers located in North America, please visit the AVer USA support site for

comprehensive RMA, Warranty, and Service information:

http://averuesa.com/classroo

Manualsnet FAQs

If you want to find out how the C20i AVer works, you can view and download the AVer C20i Charge Cart User Manual on the Manualsnet website.

Yes, we have the User Manual for AVer C20i as well as other AVer manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a AVer C20i. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the AVer C20i Charge Cart User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This AVer C20i Charge Cart User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download AVer C20i Charge Cart User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print AVer C20i Charge Cart User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the AVer C20i Charge Cart User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.