AVer DL30 Camera Control Codes Manual PDF

1 of 17
1 of 17

Summary of Content for AVer DL30 Camera Control Codes Manual PDF

Distance Learning Tracking

Camera

DL30/DL10

Control Codes

More Help

For FAQs, technical support, software and user manual download, please visit:

Headquarters

Download Center: https://www.aver.com/download-center

Technical Support: https://www.aver.com/technical-support

USA Branch office

Download Center: https://www.averusa.com/education/support

Technical Support: https://averusa.force.com/support/s/contactsupport

Europe Branch office

Download Center: https://www.avereurope.com/download-center

Technical Support: https://www.avereurope.com/technical-support

3

Contact Information

Headquarters

AVer Information Inc.

https://www.aver.com

8F, No.157, Da-An Rd., Tucheng Dist., New Taipei City 23673, Taiwan

Tel: +886 (2) 2269 8535

Europe Branch office

AVer Information Europe B.V.

https://www.avereurope.com

Westblaak 134, 3012 KM, Rotterdam, The Netherlands

Tel: +31 (0) 10 7600 550

Technical support: eu.rma@aver.com

USA Branch office

AVer Information Inc., Americas

https://www.averusa.com

668 Mission Ct., Fremont, CA 94539, USA

Tel: +1 (408) 263 3828

Toll-free: +1 (877) 528 7824

Technical support: support.usa@aver.com

Japan Branch Office

https://jp.aver.com

160-0023 3-2-26 7

Tel: +81 (0) 3 5989 0290

: Support.EDU.JP@aver.com

Vietnam Branch Office

Cng ty TNHH AVer Information (Vit Nam)

Tng 5, 596 Nguyn nh Chiu, P.3, Qun 3,

Thnh ph H Ch Minh 700000, Vit Nam

Tel: +84 (0) 28 22 539 211

Contents

Revision History ................................................................................................... 1

Product Introduction ............................................................................................ 2

Overview-DL30 .................................................................................................. 2

Overview-DL10 .................................................................................................. 2

Visca Command Table-DL Series ........................................................................ 3

Visca over IP Settings .......................................................................................... 8

CGI Command Table-DL Series ........................................................................... 9

Example Codes-DL Series ................................................................................. 12

1

Revision History

Revision Published Description

V1.0 February 2021 First edition.

V1.1 February 2021 Swap page between CGI command and VISCA

over IP settings.

V1.2 March 2021 Update CGI command and example code.

V1.3 December 2021 Added DL10 into control code;

Refreshed More Help and Contact Information for

Headquarters and regional offices.

2

Product Introduction

Overview-DL30

(1) Camera Lens (4) Kensington Lock (7) USB Port

(2) IR Sensor (5) Audio In* (8) DC Power Jack

(3) LED Indicator (6) HDMI Port** (9) PoE+ Port***

*Line input level: 1Vrms (max)

*Mic input level: 50mVrms (max); Supplied voltage: 3.3V

**DL30 does not support HDMI port.

***Only support IEEE 802.3at PoE+ standard.

Overview-DL10

(1) Camera Lens (4) LED Indicator (7) Ethernet Port

(2) Built-in Microphones (5) Audio In* (8) DC Power Jack

(3) IR Sensor (6) USB Port (9) Kensington Lock

*Line input level: 1Vrms (max)

*Mic input level: 50mVrms (max); Supplied voltage: 3.3V

1

2 3 4 56 7 8 9

1

2

3 4

5 6 7 8 9

3

Visca Command Table-DL Series

Command

Set

Command Command

Packet

Comments DL30 DL10

CAM_Power On 8x 01 04 00 02 FF Power ON/OFF O O

Off 8x 01 04 00 03 FF O O

CAM_Zoom Stop 8x 01 04 07 00 FF O O

Tele(Variable) 8x 01 04 07 2p FF p=0 (Low) to 7 (High) O O

Wide(Variable

)

8x 01 04 07 3p FF O O

CAM_Focus Stop 8x 01 04 08 00 FF O O

Auto Focus 8x 01 04 38 02 FF O O

Manual Focus 8x 01 04 38 03 FF O O

One Push 8x 01 04 18 01 FF O O

Direct 8x 01 04 47 0p 0q 0r

0s FF

pqrs: Zoom Position O O

CAM_WB Auto 8x 01 04 35 00 FF Normal Auto O O

ATW 8x 01 04 35 04 FF O O

Indoor 8x 01 04 35 01 FF O O

Outdoor 8x 01 04 35 02 FF O O

One Push WB 8x 01 04 35 03 FF One Push WB mode O O

Manual 8x 01 04 35 05 FF Manual Control mode O O

One Push 8x 01 04 10 05 FF One Push WB Trigger O O

CAM_RGain Up 8x 01 04 03 02 FF Manual Control of R Gain O O

Down 8x 01 04 03 03 FF O O

CAM_Bgain Up 8x 01 04 04 02 FF Manual Control of B Gain O O

Down 8x 01 04 04 03 FF O O

CAM_AE Full Auto 8x 01 04 39 00 FF Automatic Exposure mode O O

4

Manual 8x 01 04 39 03 FF Manual Control mode O O

Shutter

Priority

8x 01 04 39 0A FF Shutter Priority Automatic Exposure mode O O

Iris Priority 8x 01 04 39 0B FF Iris Priority Automatic Exposure mode O X

Bright 8x 01 04 39 0D FF Bright Mode (Manual control) O O

CAM_Shutter Up 8x 01 04 0A 02 FF Shutter Setting O O

Down 8x 01 04 0A 03 FF O O

CAM_Iris Up 8x 01 04 0B 02 FF Iris Setting O X

Down 8x 01 04 0B 03 FF O X

CAM_Gain Up 8x 01 04 0C 02 FF Gain Setting O O

Down 8x 01 04 0C 03 FF O O

CAM_Bright Up 8x 01 04 0D 02 FF Bright Setting O O

Down 8x 01 04 0D 03 FF O O

Up 8x 01 04 0E 02 FF Exposure Compensation Amount Setting O O

Down 8x 01 04 0E 03 FF O O

CAM_Backlight On 8x 01 04 33 02 FF Back Light Compensation ON/OFF X X

Off 8x 01 04 33 03 FF

CAM_Preset Reset 8x 01 04 3F 00 pp

FF

pp: Preset Number 0x00~0xFF O O

Set 8x 01 04 3F 01 pp

FF

O O

Recall 8x 01 04 3F 02 pp

FF

O O

CAM_Menu On/Off 8x 01 06 06 10 FF Display ON/OFF X X

Pan-tilt Drive Up 8x 01 06 01 VV WW

03 01

VV: Pan speed setting 0x01 (low speed) to 0x18 (high

speed)

WW: Tilt speed setting 0x01 (low speed) to 0x18 (high

speed)

O O

Down 8x 01 06 01 VV WW

03 02

O O

Left 8x 01 06 01 VV WW O O

5

01 03

Right 8x 01 06 01 VV WW

02 03

O O

UpLeft 8x 01 06 01 VV WW

01 01

O O

UpRight 8x 01 06 01 VV WW

02 01

O O

DownLeft 8x 01 06 01 VV WW

01 02

O O

DownRight 8x 01 06 01 VV WW

02 02

O O

Stop 8x 01 06 01 VV WW

03 03

O O

Home 8x 01 06 04 FF O O

Reset 8x 01 06 05 FF X X

CAM_Wdr On 8x 01 04 3D 02 FF Wdr ON/OFF O O

Off 8x 01 04 3D 03 FF O O

CAM_MenuEnter 8x 01 7E 01 02 00

01 FF

Enter Submenu X X

Tally Lamp ON 8x 01 7E 01 0A 00

02 FF

X X

Tally Lamp OFF 8x 01 7E 01 0A 00

03 FF

X X

Freeze Freeze On 81 01 04 62 02 FF Freeze On Immediately X X

Freeze Off 81 01 04 62 03 FF Freeze Off Immediately X X

Preset Freeze

On

81 01 04 62 22 FF Freeze On When Running Preset O O

Preset Freeze

Off

81 01 04 62 23 FF Freeze Off When Running Preset O O

6

Auto Tracking On 8x 01 04 7D 02 FF Auto tracking ON/OFF O O

Off 8x 01 04 7D 03 FF O O

CAM_Memory

Special

Set 8x 01 04 3F 01 pp

FF

pp: 0x00 To 0xFF normal preset

pp: 0x5F => Turn on OSD menu

pp: 0xA0 => Full Body

pp: 0xA1 => Upper Body

pp: 0xA2 => Tracking Point

pp: 0xA3 => Switch

pp: 0xA4 => Presenter mode (support with FW v25 or

newer)

pp: 0xA5 => Zone mode (support with FW v25 or newer)

Turn on OSD menu X

Full Body O

Upper Body O

Tracking Point X

Switch O

Presenter mode O

Zone mode O

Turn on OSD menu X

Full Body O

Upper Body O

Tracking Point X

Switch O

Presenter mode O

Zone mode O

Inquiry

Command

Command

Packet

Reply Packet Comments DL30 DL10

CAM_PowerInq 8x 09 04 00 FF y0 50 02 FF On O O

y0 50 03 FF Off O O

CAM_WBModeInq 8x 09 04 35 FF y0 50 00 FF Auto O O

y0 50 01 FF In Door O O

y0 50 02 FF Out Door O O

y0 50 03 FF One Push WB O O

y0 50 04 FF ATW O O

y0 50 05 FF Manual O O

CAM_RGainInq 8x 09 04 43 FF y0 50 00 00 0p 0q FF pq: R Gain O O

CAM_BGainInq 8x 09 04 44 FF y0 50 00 00 0p 0q FF pq: B Gain O O

CAM_AEModeInq 8x 09 04 39 FF y0 50 00 FF Full Auto O O

y0 50 03 FF Manual O O

y0 50 0A FF Shutter Priority O O

y0 50 0B FF Iris Priority O O

7

y0 50 0D FF Bright O O

CAM_ShutterPosInq 8x 09 04 4A FF y0 50 00 00 0p 0q FF pq: Shutter Position O O

CAM_IrisPosInq 8x 09 04 4B FF y0 50 00 00 0p 0q FF pq: Iris Position O X

CAM_GainPosInq 8x 09 04 4C FF y0 50 00 00 0p 0q FF pq: Gain Position O O

CAM_BrightPosInq 8x 09 04 4D FF y0 50 00 00 0p 0q FF pq: Bright Position O O

CAM_ExpCompPosI

nq

8x 09 04 4E FF y0 50 00 00 0p 0q FF pq: ExpComp Position O O

CAM_FocusModeIn

q

8x 09 04 38 FF y0 50 02 FF Auto Focus O O

y0 50 03 FF Manual Focus O O

CAM_FocusPosInq 8x 09 04 48 FF y0 50 0p 0q 0r 0s FF pqrs: Focus Position O O

CAM_ZoomPosInq 8x 09 04 47 FF y0 50 0p 0q 0r 0s FF pqrs: Zoom Position O O

8

Visca over IP Settings

The x value should be 1 for Visca-over-IP string,

Example string: 01 00 00 09 00 00 00 01 81 01 06 01 07 07 01 03 FF

9

CGI Command Table-DL Series

CGI List for Video Transmission DL30/DL10

CGI item name URL Command Parameter Name Parameter value Description

Get JPEG /snapshot 1280x720 jpg 848x480 jpg

Get RTSP stream rtsp://ip/live_st1 O

CGI List for Camera Control DL30/DL10

CGI item name URL Command Parameter

Name

Parameter

value

Description

up start /cgi-bin?SetPtzf= 1,0,1&(random) O

up end /cgi-bin?SetPtzf= 1,0,2&(random) O

down start /cgi-bin?SetPtzf= 1,1,1&(random) O

down end /cgi-bin?SetPtzf= 1,1,2&(random) O

left start /cgi-bin?SetPtzf= 0,1,1&(random) O

left end /cgi-bin?SetPtzf= 0,1,2&(random) O

right start /cgi-bin?SetPtzf= 0,0,1&(random) O

right end /cgi-bin?SetPtzf= 0,0,2&(random) O

zoom_in start /cgi-bin?SetPtzf= 2,0,1&(random) O

zoom_in end /cgi-bin?SetPtzf= 2,0,2&(random) O

zoom_out start /cgi-bin?SetPtzf= 2,1,1&(random) O

zoom_out end /cgi-bin?SetPtzf= 2,1,2&(random) O

set preset: /cgi-bin?ActPreset= 1,N&(random) N : position O

load preset: /cgi-bin?ActPreset= 0,N&(random) N : position O

CGI List for Various Settings DL30/DL10

exposure value /cgi-bin?Set= img_expo_expo,3,N&(random) value 1 ~ 9 N : value O

saturation /cgi-bin?Set= img_saturation,3,N&(random) value 0 ~ 10 N : value O

contrast /cgi-bin?Set= img_contrast,3,N&(random) value 0 ~ 4 N : value O

10

Tracking on: /cgi-bin?Set= trk_tracking_on,3,1 O

Tracking off: /cgi-bin?Set= trk_tracking_on,3,0 O

Tracking Presenter Mode: /cgi-bin?Set= trk_mode,3,1&(random) O

Tracking Zone Mode: /cgi-bin?Set= trk_mode,3,2&(random) O

Reboot /cgi-bin?OnePush=! O

Factory Reset /cgi-bin?OnePush=d O

Mode Presenter /cgi-bin?Set= trk_mode,3,1&(random) O

Mode Zone /cgi-bin?Set= trk_mode,3,2&(random) O

Mode Get /cgi-bin?Get= trk_mode,3&(random) Reply:

trk_mode,3=1 : Presenter(Wide

Area)

trk_mode,3=2 : Zone(Segment)

O

Update Detect Info /cgi-bin?Set= trk_update_detect,3,1 Use this CGI to update data

before getting the detect zone

info

O

Click Track

Get detect zone number

/cgi-bin?Get= trk_detect_num,3 Reply:

trk_detect_num,3=X

X: Number of detected people, up

to 50.

(Use "Update Detect Info" CGI

first)

O

Click Track

Get detect zone info

/cgi-bin?GetTrackingDe

tectZone=X

(X: Number of human

shape box that user

want to get)

Reply:

focus: XX

zone[00]:840,703,207,379

zone[01]:1176,724,240,350

XX - current tracking box number

zone[NN]:x,y,w,h - box

coordinate(based on 1080p)

O

Click Track /cgi-bin?SetString= TrackingFocusZone,[x,y,w,h] [x,y,w,h]: Position of tracking O

11

Set target zone target (based on 1080p)

Click Track

Set target zone

/cgi-bin?Set= trk_assign_zone,3,X X: Human shape box number

of tracking target

O

Tracking On/Off Get /cgi-bin?Get= trk_tracking_on,3 Reply:

trk_tracking_on,3=1 : On

trk_tracking_on,3=0 : Off

O

Sleep Timer /cgi-bin?Set= sys_sleep_time,3,N value 0, 10,

300,

600,

1200

N : value (0 : Off) O

12

Example Codes-DL Series

Example codes

Assuming the camera having an IP address of 10.10.10.5

Up start : http://10.10.10.5/cgi-bin?SetPtzf=1,0,2&(1234)

Zoom in start : http://10.10.10.5/cgi-bin?SetPtzf=2,0,1&(1235)

Tracking on : http://10.10.10.5/cgi-bin?Set=trk_tracking_on,3,1

Tracking off : http://10.10.10.5/cgi-bin?Set=trk_tracking_on,3,0

The (random) code is user defined and can be any unique code in sequence. This

ID cannot be the same, otherwise the camera will ignore this command.

Example codes:

There are the examples for saturation, exposure, and contrast.

Saturation

example: http://10.10.10.5/cgi-bin?Set=img_saturation,3,10&(1238) <= the red

value 10 is the value of saturation.

Exposure example #1:

http://10.10.10.5/cgi-bin?Set=img_expo_expo,3,9&(1239) <= the red value 9 is

the value of exposure, the exposure value (-4 ~ 4) in system is 4.

Exposure example #2:

http://10.10.10.5/cgi-bin?Set=img_expo_expo,3,1&(1240) <= the red value 1 is

the value of exposure, the exposure value (-4 ~ 4) in system is -4.

13

Contrast example:

http://10.10.10.5/cgi-bin?S

Manualsnet FAQs

If you want to find out how the DL30 AVer works, you can view and download the AVer DL30 Camera Control Codes Manual on the Manualsnet website.

Yes, we have the Control Codes Manual for AVer DL30 as well as other AVer manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Control Codes Manual should include all the details that are needed to use a AVer DL30. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the AVer DL30 Camera Control Codes Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This AVer DL30 Camera Control Codes Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download AVer DL30 Camera Control Codes Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print AVer DL30 Camera Control Codes Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the AVer DL30 Camera Control Codes Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.