Aukey SK-M30 Speaker User Manual PDF

1 of 1
1 of 1

Summary of Content for Aukey SK-M30 Speaker User Manual PDF

- 02 - - 03 - - 04 - - 05 - - 06 - - 07 -- 01 -

Thank you for purchasing the AUKEY SK-M30 Eclipse Wireless Speaker. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

Package Contents Eclipse Wireless Speaker User Manual Micro-USB Cable Warranty Card 3.5mm Audio Cable

Specifications

Power Button Mode Button

Volume - / Previous Track

Volume + / Next Track

Play/Pause

LED Status Indicator

Microphone

SK-M30

BT 4.2, A2DP, AVRCP, HSP, HFP

2 10W

40Hz-20KHz

86dB

35 3dB

DC 5V

4 hours

12 hours (at 50% volume)

10 hours

120 hours

Li-ion (2 x 2000mAh)

Up to 10m / 33ft

14F- 122F / -10C- 50C

211 114 64mm / 8.3 4.5 2.5

800g / 28.2oz

Product Diagram

Model

Technology

Audio Output Power

Frequency Response

Signal-to-Noise Ratio

Microphone Sensitivity

Input

Charging Time

Play Time

Talk Time

Standby Time

Battery Type

Operating Range

Operating Temperature

Dimensions

Weight

Powering On / Off To power on, press and hold the power button for 3 seconds and the LED indicator will turn blue To power off, press and hold the power button for 3 seconds and the LED indicator will turn off

Pairing 1. When you turn on the speaker, the speaker will automatically enter pairing mode and the LED indicator will start to flash blue rapidly

2. Activate the pairing function on your phone or other compatible device and select AUKEY SK-M30 3. If a code or pin is required for pairing, enter 0000 4. When successfully paired, the LED indicator will stay on

Notes To reset the speaker (to clear program errors), use a straightened paper clip or a toothpick to carefully short-press the reset button (towards the top at the back, furthest inside the 3.5mm Aux in jack) The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired If your paired device is switched off or manually disconnected, the speaker will enter pairing mode and automatically shut down after 10 minutes If the speaker or connected device exceeds the operating range, the speaker will disconnect. The connection to the last successfully connected device will be re-established once you re-enter wireless range within 10 minutes. To connect to other devices, please repeat the Previous "Pairing" steps

Playing Audio via Aux Connection Connect the SK-M30 to your PC, laptop, or other device with Aux output using the included 3.5mm audio cable. Press the power button to turn on and the LED indicator will flash blue once every 2 seconds.

Notes The speaker will disconnect from your phone or other paired devices when an audio cable is plugged into the Aux in jack. Short-press the mode button to switch back to Bluetooth mode When playing audio using the Aux in jack, press the volume+/- to adjust the volume and short press play/pause to pause or resume. Next / previous track control on the speaker is disabled in Aux mode For some computers, you may need to access the audio control panel to manually set the speaker as the default audio device

LED Charging Indicator

Micro-USB Charging PortReset (inside Aux In)

Aux In

Controls & LED Indicators Functions

Cancel pairing

Answer / End a call

Reject an incoming call

Redial last-called number

Adjust volume

Next / Previous track

Pause / Resume

Instructions

When connected, press and hold the mode button for more than two seconds

Press play/pause

Press and hold play/pause for more than two seconds

Double-press play/pause in standby mode

Press volume + / - once

Press and hold volume + / - for 2 seconds

Press play/pause

LED Indicator

Blue flashing rapidly

Blue

Blue flashing once every 2 seconds

Red on

Red off (after charging)

Status

Pairing mode

Connected

Playing music / In call

Charging

Fully charged

Warranty & Customer Support For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number.

Amazon US orders: support.us@aukey.com Amazon EU orders: support.eu@aukey.com Amazon CA orders: support.ca@aukey.com Amazon JP orders: support.jp@aukey.com

*Please note, AUKEY can only provide after sales service for productspurchased directly from AUKEY. Ifyou have purchased from a different seller, please contact them directly for service or warranty issues.

- 09 - - 10 - - 11 - - 12 - - 13 -

Vielen Dank fr Ihren Kauf von dem AUKEY SK-M30 Eclipse Drahtlosen Lauts- precher. Bitte lesen Sie diese Bedienungsanleitung aufmerksam durch und bewahren Sie sie fr zuknftige Referenz gut auf. Sollten Sie darber hinaus Untersttzung brauchen, kontaktieren Sie bitte unseren Kundenservice mit Ihrer Produktmod-ellnummer und Amazon-Bestellnummer.

Lieferumfang

Eclipse Drahtloser Lautsprecher Micro-USB-Kabel 3,5mm Audiokabel

Spezifikationen

- 08 -

Power-Taste Modus-Taste

Lautstrke - / Vorheriger Titel

Lautstrke +/ Nchster Titel

Play/Pause

LED-Statusanzeige

Mikrofon

SK-M30

BT 4.2, A2DP, AVRCP, HSP, HFP

2 10W

40Hz-20KHz

86dB

35 3dB

DC 5V

4 Stunden

12 Stunden (bei 50% der Lautstrke)

10 Stunden

120 Stunden

Li-ion (2 x 2000mAh)

Bis zu 10m / 33ft

14F- 122F / -10C- 50C

211 114 64mm / 8,3 4,5 2,5

800g / 28,2oz

Diagramm des Produkts

Modell

Technologie

Audio-Ausgangsleistung

Frequenzbereich

Signal-Rausch-Verhltnis

Mikrofonempfindlichkeit

Eingang

Ladedauer

Spielzeit

Gesprchszeit

Standby-Zeit

Akku-Typ

Betriebsbereich

Betriebstemperatur

Abmessungen

Gewicht

Aufladen Laden Sie bitte vor dem ersten Gebrauch diesen Lautsprecher vollstndig auf. Zum Aufladen, schlieen Sie ihn an ein USB-Ladegert oder Ladeanschluss mit mitgeliefertem Micro-USB-Kabel an. Wenn die rote LED-Anzeige erlischt, ist Ihr Lautsprecher vollstndig aufgeladen und bereit fr Gebrauch. Die Ladung dauert rund 4 Stunden.

Ein / Ausschalten Zum Einschalten, halten Sie die Power-Taste fr 3 Sekunden lang gedrckt und die LED-Anzeige wird auf blau wechseln Zum Ausschalten, halten Sie die Power-Taste fr 3 Sekunden lang gedrckt und die LED-Anzeige wird erlschen

Kopplung 1. Wenn Sie den Lautsprecher einschalten, wechselt der Lautsprecher sich

automatisch in den Kopplungsmodus, und startet die LED-Anzeige blau schnell zu blinken 2. Aktivieren Sie die Kopplungsfunktion am Ihren Handy oder anderen kompatiblen Gert und whlen Sie AUKEY SK-M30 3. Falls ein Code oder Pin fr Kopplung erforderlich ist, geben Sie bitte 0000 ein 4. Sobald erfolgreich gekoppelt, bleibt die LED-Anzeige aufleuchten

Hinweise Zum Zurcksetzen des Lautsprechers (um Programmfehler zu lschen), drcken Sie die Zurcksetzen-Taste mit einer gestreckten Broklammer oder einem Zahnstocher kurz (nach oben an der Rckseite, am weitesten in der 3,5mm Aux-In-Buchse) Der Lautsprecher schaltet sich nach 10 Minuten im Kopplungsmodus automatisch aus, wenn keine Gerte gekoppelt sind Wenn Ihr gekoppeltes Gert ausgeschaltet oder manuell getrennt ist, wechselt der Lautsprecher sich in dem Kopplungsmodus und schaltet sich nach 10 Minuten automatisch aus Wenn der Lautsprecher oder das gekoppelte Gert den Betriebsbereich berschreitet, wird die Verbindung der Lautsprecher getrennt werden. Die Verbindung mit dem zuletzt erfolgreichen gekoppelten Gert wird neu hergestellt, sobald Sie innerhalb von 10 Minuten den Betriebsbereich zurckkommen. Um mit anderen Gerten zu koppeln, wiederholen Sie bitte die vorherigen Kopplung Schritte

Abspielen der Audio per Aux-Verbindung Schlieen Sie das SK-M30 an Ihren PC, Laptop, oder ein anderes Gert mit Aux-Ausgang mit dem mitgeliefertem 3,5mm Audiokabel an. Drcken Sie zum Einschalten die Power-Taste, leuchtet die Anzeige blau einmal jede 2 Sekunden.

Hinweise Die Verbindung zwischen dem Lautsprecher und Ihrem Handy oder anderen gekoppelten Gerten wird trennen, wenn ein Audio kabel in die Aux-In-Buchse

LED-Ladeanzeige

Micro-USB-LadeanschlussZurcksetzen (Innenseite von Aux-In)

Aux-In

Bedienungsanleitung Garantiekarte

eingesteckt ist. Drcken Sie die Modus-Taste kurz, um auf Bluetooth-Modus zu wechseln Wenn Sie Audio durch Aux-In-Buchse abspielen, drcken Sie Lautstrke + / -, um die Lautstrke einzustellen und drcken Sie Play / Pause, um anzuhalten oder fortzusetzen. Die Steuerung zum Umschalten des Lieds am Lautsprecher ist in Aux-Modus deaktiviert Bei einigen Computern, mssen Sie die Audio-Systemsteuerung ffnen, um den Lautsprecher als Standard-Audio-Gert manuell einzustellen

Kontrollen & LED-Anzeigen

LED-Anzeige

Blau schnell blinken

Blau

Blau einmal alle 2 Sekunden blinken

Rot

Rotaus(nach der Ladung)

Status

Kopplungsmodus

Gekoppelt

Musik abspielen / Beim Anruf

Aufladen

Vollstndig aufgeladen

Produktpflege & Nutzung Halten Sie das Produkt von Flssigkeiten, extreme Hitze und starken Magnetfeldern fern Verwenden Sie den Kopfhrer bei hoher Lautstrke ber einen lngeren Zeitraum nicht, da dies zu dauerhaften Gehrschden oder -verlusten fhren kann

Garantie & Kundenservice Bei Fragen, Untersttzungen oder Garantieansprchen kontaktieren Sie uns bitte unter der jeweiligen Adresse, die Ihrer Region entspricht. Bitte geben Sie Ihre Amazon-Bestellnummer und die Produktmodellnummer an.

Bestellungen ber Amazon Europa:support.eu@aukey.com

* Wichtiger Hinweis: AUKEY bietet nur fr die Produkte einen Kundenservice an, die direkt bei AUKEY

erworben wurden. Sollten Sie Ihr Produkt bei einem anderen Hndler gekauft haben, kontaktieren

Sie bitte dessen Kundendienstbezglich Fragen oder Garantieansprchen.

Anleitungen

Wenn gekoppelt, halten Sie die Modus-Taste fr 2 Sekun den lang gedrckt

Drcken Sie Play / Pause

Halten Sie Play / Pause fr ber 2 Sekunden lang gedrckt

Drcken Sie Play / Pause im Standby-Modus doppelt

Drcken Sie Lautstrke +/- einmal

Drcken und halten Sie die Lautstrke + / - fr 2 Sekunden

Drcken Sie Play / Pause

Funktionen

Abbrechen der Kopplung

Beantworten / Beenden eines Anrufs

Abweisen eines eingehenden Anrufs

Whlwiederholung der letzten gerufenen Nummer

Anpassung der Lautstrke

Nchster / Vorheriger Titel

Pause / Fortsetzen

- 15 - - 16 - - 17 - - 18 - - 19 -

Merci davoir achet le AUKEY SK-M30 Eclipse Huat-parleur Sans Fil. Veuillez lire attentivement ce mode demploi et le conserver pour rfrence future. Si vous avez besoin des aides, veuillez contacter notre quipe de service client avec le numro de modle et votre numro de commande Amazon.

Contenu de lEmballage Eclipse Huat-parleur Sans Fil Cble Micro-USB Cble Audio 3,5mm

Spcifications

- 14 -

Bouton dAlimentation Bouton de Mode

Volume - / Piste Prcdente

Volume + / Piste Suivante

Jouer / Pauser

Indicateur dtat LED

Microphone

SK-M30

BT 4,2, A2DP, AVRCP, HSP, HFP

2 10W

40Hz-20KHz

86dB

35 3dB

DC 5V

4 heures

12 heures ( 50% volume)

10 heures

120 heures

Li-ion (2 x 2000mAh)

Jusqu 10m / 33ft

14F- 122F /-10C- 50C

211 114 64mm / 8,3 4,5 2,5

800g / 28,2oz

Diagramme du Produit

Modle

Technologie

Puissance de Sortie Audio

Rponse de Frquence

Rapport Signal-bruit

Sensibilit du Microphone

Entre

Temps de Charge

Temps de Travail

Temps de Conversation

Temps en Veille

Type de Batterie

Gamme de Fonctionnement

Temprature dOpration

Dimensions

Poids

Charger Veuillez charger compltement le haut-parleur avant la premire fois dutilisation. Connectez le haut-parleur un chargeur USB ou un port de charge avec le cble micro-USB inclus pour charger. Lorsque lindicateur de charge LED rouge steint, votre haut-parleur est compltement charg et prt tre utilis. La charge dure environ 4 heures.

Allumer / teindre Pour allumer, appuyez et maintenez le bouton dalimentation pendant 3 secondes et lindicateur LED deviendra bleu Pour teindre, appuyez et maintenez le bouton dalimentation pendant 3 secondes et lindicateur LED steindra

Appairage 1. Lorsque vous allumez le haut-parleur, le haut-parleur entrera automatiquement

en mode dappairage et lindicateur LED commencera clignoter en bleu rapidement 2. Activez la fonction dappairage sur votre tlphone ou autre appareil compatible et slectionnez AUKEY SK-M30 3. Si un code ou un pin est ncessaire pour lappairage, veuillez entrer 0000 4. Lorsquil est appair avec succs, lindicateur LED restera allum

Notes Pour rinitialiser le haut-parleur (pour effacer les erreurs de programme), utilisez un trombone redress ou un cure-dent et appuyez brivement avec prcaution sur le bouton de rinitialisation (versle haut larrire, au plus lintrieur de Aux In 3,5 mm) Le haut-parleur steindra automatiquement aprs 10 minutes en mode dappairage sil ny aucun dappareil est appair Si votre appareil appair est teint ou dconnect, le haut-parleur entrera en mode dappairage et steindra automatiquement aprs 10 minutes Si le haut-parleur ou lappareil connect dpasse la gamme de fonctionnement, le haut-parleur se dconnectera. La connexion du dernier appareil connect avec succs sera rtablie une fois que vous entrez de nouveau dans la gamme sans fil dans 10 minutes. Pour connecter autres appareils, veuillez rpter les tapes prcdentes Appairage

Jouer Audio via la Connexion Aux Connectez le SK-M30 votre PC, ordinateur portable ou autre appareil qui avec la sortie Aux, utilisez le cble audio inclus 3,5 mm. Appuyez sur bouton dalimentation pour allumer le haut-parleur et lindicateur LED bleu clignote une fois toutes les 2 secondes.

Indicateur de Charge LED

Port de Charge Micro-USBRinitialisation ((inclure Aux In))

Aux-In

Notes Le haut-parleur se dconnectera de votre tlphone ou dautres appareils appairs lorsquun cble audio est branch sur la prise Aux in. Appuyez brivement sur le bouton de mode pour revenir en mode Bluetooth Lorsque jouer vido avec la prise Aux in, appuyez sur le bouton volume + / - pour rgler le volume et appuyez brivement sur le bouton jouer / pauser

pour pauser ou reprendr e. La commande de piste suivante / piste pr- cdente sur le haut-parleur est dsactive en mode Aux Pour certains ordinateurs, vous devrez peut-tre accder au panneau de contrle audio pour rgler manuellement le haut-parleur comme lappareil audio par dfaut

Mode dEmploi Carte de Garantie

Contrles & Indicateurs LED

Indicateur LED

LED bleue clignote rapidement

LED bleue

LED bleue clignote une fois toutes les 2 secondes

LED rouge

LED rouge steint (aprs avoir charg)

tat

Mode dappairage

Connect

Jouer musique / en appel

En train de charger

Compltement charg

Entretien du Produit & Utilisation Tenir lcart de liquides, de chaleur extrme et de champs magntiques puissants Ne pas utiliser le haut-parleur volume lev pendant longtemps, parce que cela peut causer des dommages auditifs permanents ou des pertes

Garantie & Service Client Pour des questions, soutiens ou demandes de garanties,veuillez nous contacter ladresse ci-dessous qui correspond votre rgion. Veuillez inclure votre numro de commande Amazon et le numro de modle du produit.

Amazon EU commandes: support.eu@aukey.com

*Veuillez noter que, AUKEY ne peut fournir le service aprs-vente que pour les produits achets

directement chez AUKEY. Si vous avez achet des produits auprs dun vendeur diffrent, veuillez

le contacter pour tous les services ou questions de garantie.

Fonctions

Annuler lappairage

Rpondre / Terminer un appel

Rejeter un appel entrant

Recomposer le dernier numro

Rgler le volume

Piste Suivante / Prcdente

Jouer / Pauser

Instructions

Une fois connect, appuyez et maintenez le bouton de mode pendant plus de deux secondes

Appuyez le bouton jouer / pauser

Appuyez et maintenez le bouton jouer / pauser pendant plus de deux secondes

Appuyez deux fois sur le bouton jouer / pauser en mode veille

Appuyez une fois sur le bouton volume + / -

Appuyez et maintenez le bouton volume +/- pendant deux secondes

Appuyez le bouton jouer / pauser

- 21 - - 22 - - 23 - - 24 - - 25 -

Gracias por comprar AUKEY SK-M30 Eclipse Altavoz Inalmbrico. Por favor, lea

atentamente el manual usuario y consrvelo para futuras consultas. Si necesita

cualquier ayuda, pngase en contacto con nuestro equipo de servicio con

su nmero de modelo del producto y su nmero de orden de Amazon.

Contenidos del Paquete Eclipse Altavoz Inalmbrico Cable Micro-USB 3,5mm Cable de Audio

Especificaciones

- 20 -

Botn de Encendido Botn de Modo

Volumen - / Pista Anterior

Volumen + / Pista Siguiente

Reproducir / Pausar

Indicador de Estado LED

Micrfono

SK-M30

BT 4.2, A2DP, AVRCP, HSP, HFP

2 10W

40Hz-20KHz

86dB

35 3dB

DC 5V

4 horas

12 horas (al 50% de volumen)

10 horas

120 horas

Li-ion (2 x 2000mAh)

Hasta 10m / 33ft

14F - 122F / -10C - 50C

211 114 64mm / 8,3 4,5 2,5

800g / 28,2oz

Diagrama del Producto

Modelo

Tecnologa

Potencia de Salida de Audio

Respuesta de Frecuencia

Relacin Seal-Ruido

Sensibilidad del Micrfono

Entrada

Tiempo de Carga

Tiempo de Reproduccin

Tiempo de Conversacin

Tiempo de Espera

Tipo de Batera

Rango de Funcionamiento

Temperatura de Funcionamiento

Dimensiones

Peso

Carga Por favor, cargue completamente este altavoz antes del primer uso. Conctelo a un cargador USB o puerto de carga mediante el cable Micro-USB incluido para cargar. Cuando el indicador de carga LED rojo se apaga, el altavoz est completamente cargado y listo para su uso. La carga dura alrededor de 4 horas.

Encender / Apagar Para encender, pulse y mantenga pulsado el botn de encendido durante 3 segundos y el indicador LED se volver azul Para apagar, pulse y mantenga pulsado el botn de encendido durante 3 segundos y el indicador LED se apagar

Emparejamiento 1. Al encender el altavoz, el altavoz entrar automticamente en el modo de emparejamiento y el indicador LED comenzar a parpadear rpidamente en azul. 2. Active la funcin de emparejamiento en su telfono u otro dispositivo compatible y seleccione AUKEY SK-M30. 3. Si se requiere un cdigo o pin para el emparejamiento, por favor, introduzca 0000. 4. Cuando se empareje con xito, el indicador LED permanecer encendido.

Notas Para reiniciar el altavoz (para borrar los errores del programa), use un clip de papel enderezado o un palillo de dientes para pulsar brevemente y cuidadosamente el botn de reinicio (hacia la parte superior en la parte posterior, ms lejos dentro de la 3,5mm toma de entrada Auxiliar) El altavoz se apagar automticamente despus de 10 minutos en el modo de emparejamiento si no hay dispositivos emparejados Si el dispositivo emparejado est apagado o desconectado manualmente, el altavoz entrar en el modo de emparejamiento y se apagar automticamente despus de 10 minutos Si el altavoz o el dispositivo conectado excede el rango de funcionamiento, el altavoz se desconectar. La conexin al ltimo dispositivo conectado correctamente se restablecer una vez que vuelva a entrar en el rango inalmbrico dentro de 10 minutos. Para conectarse a otros dispositivos, por favor, repita los pasos anteriores de Emparejamiento

Reproduccin de Audio a travs de la Conexin Auxiliar Conecte el SK-M30 a su PC, ordenador porttil u otro dispositivo con salida Auxiliar usando el 3,5mm cable de audio incluido. Pulse el botn de encendido para encender y el indicador LED se iluminar en azul una vez cada 2 segundos.

Indicador de Carga LED

Puerto de Carga Micro-USBReinicio (Entrada Auxiliar Interna)

Entrada Auxiliar

Notas El altavoz se desconectar de su telfono u otros dispositivos emparejados cuando un cable de audio est enchufado en la toma de entrada Auxiliar. Pulse brevemente el botn de modo para volver al modo Bluetooth Al reproducir el audio mediante la toma de entrada Auxiliar, Presione el volumen + / - para ajustar el volumen y pulse brevemente reproducir / pausar para pausar o reanudar. El control de pista siguiente / anterior en

el altavoz est desactivado en el modo Auxiliar Para algunos ordenadores, es posible que necesite acceder al panel de control de audio para ajustar manualmente el altavoz como el dispositivo de audio predeterminado

Manual Usuario Tarjeta de Garanta

Controles & Indicadores LED

Indicador LED

Azul parpadea rpidamente

Azul

Azul parpadea una vez cada 2 segundos

Rojo encendido

Rojo apagado (despus de la carga)

Estado

Modo de emparejamiento

Conectado

Reproducir la msica / Llamar

Cargando

Completamente cargado

Funciones

Cancelar el emparejamiento

Contestar / Finalizar una llamada

Rechazar una llamada entrante

Volver a marcar el ltimo nmero llamado

Ajustar el volumen

Pista Siguiente / Anterior

Pausar / Reanudar

Instrucciones

Cuando est conectado, pulse y mantenga pulsado el botn de modo durante ms de dos segundos

Pulse reproducir / pausar

Pulse y mantenga pulsado reproducir / pausar durante ms de dos segundos

Pulse dos veces reproducir / pausar en el modo de espera

Presione el volumen + / - una vez

Mantenga presionado el botn + / - durante 2 segundos

Pulse reproducir / pausar

Cuidado & Uso del Producto Por favor, mantenga el altavoz lejos de lquidos, calor extremo y campos magnticos fuertes No use el altavoz a alto volumen durante perodos prolongados, ya que esto puede causar daos o prdidas permanentes de odo

Garanta & Soporte al Cliente Para preguntas, apoyos o reclamaciones de garanta, por favor pngase en contacto con nosotros en la siguiente direccin que se corresponde con su

regin. Por favor, incluya su nmero de orden de Amazon y su nmero de modelo del producto.

Amazon EU pedidos: support.eu@aukey.com

*Por favor, tenga en cuenta que AUKEY slo puede ofrecer servicio postventa a los productos

comprados directamente de AUKEY. Si usted ha comprado del vendedor diferente, por favor,

pngase en contacto con ellos directamente sobre la garanta o los problemas de servicio.

- 27 - - 28 - - 29 - - 30 - - 31 -

Grazie per acquistare lAUKEY SK-M30 Eclipse Altoparlante Wireless. Si prega di leggere attentamente il manuale duso e di conservarlo per un riferimento futuro. In caso di qualsiasi assistenza, si prega di contattare il nostro gruppo di supporto, munito del numero di modello del Suo prodotto e del numero dordine di Amazon.

Contenuti del Pacco Eclipse Altoparlante Cavo Micro-USB 3,5mm Cavo dAudio

Specificazioni

- 26 -

Pulsante dAccensione Pulsante di Modalit

Volume - / Traccia Precedente

Volume + / Traccia Successiva

Gioco / Pausa

Indicatore di Stato LED

Microfono

SK-M30

BT 4.2, A2DP, AVRCP, HSP, HFP

2 10W

40Hz-20KHz

86dB

35 3dB

DC 5V

4 ore

12 ore (al 50% volume)

10 ore

120 ore

Li-ion (2 x 2000mAh)

Fino a 10m / 33ft

14F - 122F / -10C - 50C

211 114 64mm / 8,3 4,5 2,5

800g / 28,2oz

Diagramma del Prodotto

Modello

Tecnologia

Potenza dUscita dAudio

Risposta di Frequenza

Rapporto Segnale-Rumore

Sensibilit di Microfono

Ingresso

Tempo di Carica

Tempo dOperazione

Tempo di Chiamata

Tempo di Standby

Tipo di Batteria

Gamma dOperazione

Temperatura dOperazione

Dimensioni

Peso

Carica Si prega di caricare completamente laltoparlante prima del primo uso. Collegarlo con un caricatore o una porta di carica USB tramite il cavo Micro-USB incluso per la carica. Quando lindicatore LED di carica rosso si spegne, il Suo altoparlante caricato completamente ed pronto per luso. Ci mettono circa 4 ore per la carica.

Accendere / Spegnere Per laccensione, tenere premuto il pulsante daccensione per 3 secondi e lindicatore LED diventa blu Per lo spegnimento, tenere premuto il pulsante daccensione pe 3 secondi e lindicatore LED si spegne

Appaiamento 1. Quando laltoparlante saccende, entra automaticamente in modalit dappaiamento e lindicatore LED inizia a lampeggiare velocemente in blu. 2. Attivare la funzione dappaiamento sul Suo telefono o sugli altri dispositivi compatibili e scegliere AUKEY SK-M30. 3. Se richiesto un codice o un pin per lappaiamento, inserire 0000. 4. Quando appaiato con successo, lindicatore LED rimane acceso.

Nota Per reimpostare laltoparlante (per cancellare gli errori di programma), usare una graffetta raddrizzata o uno stuzzicadenti per premere brevemente ed attentamente il pulsante di reimpostazione (verso lalto sul retro, nellintimo del 3,5mm jack dingresso Aux) Laltoparlante si spegne automaticamente dopo 10 minuti in modalit dappaiamento se nessun dispositivo viene appaiato Se il Suo dispositivo appaiato spento o scollegato manualmente, laltoparlante

entra in modalit dappaiamento e si spegne automaticamente dopo 10 minuti Se laltoparlante o il dispositivo collegato supera la gamma doperazione, laltoparlante perde la connessione. La connessione con lultimo dispositivo appaiato con successo viene ristabilita una volta che si ritorna alla gamma wireless entro 10 minuti. Per collegare altri dispositivi, si prega di ripetere le precedenti fasi Appaiamento

Trasmissione dAudio tramite la Connessione Aux Collegare il SK-M30 con il Suo PC, il portatile, o gli altri dispositivi muniti delluscita Aux utilizzando il 3,5mm cavo daudio incluso. Premere il pulsante daccensi- one per accenderlo e lindicatore LED lampeggia in blu ogni 2 secondi

Nota Laltoparlante si scollega dal Suo telefono o dai dispositivi appaiati

Indicatore di Carica LED

Porta di Carica Micro-USBReset (nellIngresso Aux)

Ingresso Aux

quando un cavo daudio viene inserito nel jack dingresso Aux. Premere brevemente il pulsante di modalit per tornare alla modalit Bluetooth Durante la trasmissione daudio tramite lAux, premere il volume + / - per

regolare il volume e premere brevemente il gioco / pausa per pausa o ripresa. Il controllo di traccia successiva / precedente disabilitato in modalit Aux

Per alcuni computer, necessario accedere il pannello per controllo daudio

per impostare manualmente laltoparlante come il dispositivo daudio predefinitoManuale dUso Certificato di Garanzia

Controlli & Indicatori LED Funzioni

Cancellare lappaiamento

Rispondere / Terminare una chiamata

Rifiutare una chiamata in arrivo

Rifare lultimo numero

Regolare il volume

Traccia successiva / precedente

Pausa / Ripresa

Istruzioni

Quando collegato, tenere premuto il pulsante di modalit per pi di due secondi

Premere il gioco / pausa

Tenere premuto il gioco / pausa per pi di due secondi

Premere due volte il gioco/ pausa in modalit di standby

Premere una volta il volume + / -

Tenere premuto il volume + / - per 2 secondi

Premere il gioco / pausa

Indicatore LED

Lampeggia velocemente in blu

Blu

Lampeggia in blu una volta ogni 2 secondi

Rosso acceso

Rosso spento (dopo la carica)

Stato

Modalit dappaiamento

Collegato

Trasmissione di musica / Durante una chiamata

Caricando

Caricato completamente

- 33 - - 34 - - 35 - - 36 - - 37 -

AUKEY SK-M30 Eclipse

Eclipse Micro USB 3.5mm

- 32 -

/

+/

/

LED

SK-M30

BT 4.2, A2DP, AVRCP, HSP, HFP

2 10W

40Hz-20KHz

86dB

35 3dB

DC 5V

4

12 (50%)

10

120

2 x 2000mAh

10m

-10-50

211 114 64mm

800g

SN

Micro USBUSBUSB Micro USBMicro USBLED 4

/ 3LEDON 3LEDOFF

1LED

2 AUKEY SK-M30 3 0000 4 LED

3.5mm Aux 10 OFF 10OFF 10m 10

AUX 3.5mmSK-M30PC LED2

3.5mmAux PC Bluetooth 3.5mmAux /-/ /Aux/

LED

Micro USB ( Aux In )

Aux In

LED

/

/

/

2

/

/2

/ 2

+/-

+/-2

/

E: support.jp@aukey.com

*AUKEY

LED

LED

LED

LED21

LED

LED

/

Contents

English

Deutsch

Franais

Espaol

Italiano

01~07

08~13

14~19

20~25

26~31

32~37Eclipse Wireless Speaker

Model: SK-M30

Charging Please fully charge this speaker before first use. Connect it to a USB charger or charging port with the included micro-USB cable to charge. When the red LED charging indicator turns off, your speaker is fully charged and ready for use. Charging takes around 4 hours.

Cura & Uso del Prodotto Allontanarsi dai liquidi, dal calore estremo e dai forti campi magnetici

Non usare questo altoparlante ad alto volume per lunghi periodi, che pu

causare danno o perdita permanente alludito

Garanzia & Assistenza ai Clienti Per domande, supporto o richieste di garanzia, contattarci al seguente indirizzo

che corrisponde alla Sua regione. Si prega dinserire il Suo numero dordine di

Amazon e di modello dei prodotti.

Ordini di Amazon EU: support.eu@aukey.com

*Si prega di notare che AUKEY pu offrire solo il servizio di post-vendita per i prodotti acquistati

direttamente da AUKEY. Se ha acquistato da un venditore diverso, si prega di contattarlo

direttamente per problemi di servizio o di garanzia.

Product Care & Use Keep away from liquids, extreme heat, and strong magnetic fields Do not use this speaker at high volume for extended periods, as this may cause permanent hearing damage or loss

AUKEY International Ltd. www.aukey.com | support@aukey.com No.102, Building P09, Electronics Trade Center Huanan City, Pinghu Town, Longgang District Shenzhen, Guangdong, 518111, CN

FCC ID: 2AFHP-SK-M30

Notice for US Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may causeundesired operation

FCC Rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna

Manualsnet FAQs

If you want to find out how the SK-M30 Aukey works, you can view and download the Aukey SK-M30 Speaker User Manual on the Manualsnet website.

Yes, we have the User Manual for Aukey SK-M30 as well as other Aukey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Aukey SK-M30. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Aukey SK-M30 Speaker User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Aukey SK-M30 Speaker User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Aukey SK-M30 Speaker User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Aukey SK-M30 Speaker User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Aukey SK-M30 Speaker User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.