Aukey SK-A2 Speaker User Manual PDF

1 of 1
1 of 1

Summary of Content for Aukey SK-A2 Speaker User Manual PDF

- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -

- 07 - - 08 - - 09 - - 10 - - 11 -

- 12 - - 13 - - 14 - - 15 - - 16 -

- 17 - - 18 - - 19 - - 20 - - 21 -

- 22 - - 23 - - 24 - - 25 - - 26 -

- 27 - - 28 - - 29 - - 30 - - 31 -

Thank you for purchasing the AUKEY SK-A2 Portable Wireless Speaker. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

Package Contents Portable Wireless Speaker Micro-USB Cable 3.5mm Audio Cable User Manual Warranty Card

Product Diagram Power Button

Multi-Function Button

Volume + / Next Track

Volume - / Previous Track

LED Status Indicator

LED Battery Level Indicator

Micro-USB Input

3.5mm Audio Input Jack

USB Output

Microphone

Specifications Model

Technology

Audio Output Power

Frequency Range

Charging Time

Play Time

Battery Type

Micro-USB Input

USB Output

Operating Range

Operating Temperature

Dimensions

Weight

SK-A2

BT 4.2, A2DP, AVRCP, HSP, HFP

2 x 3.5W

2.4 - 2.48GHz

2.5 hours

6 hours (at 50% volume)

Li-ion (2200mAh)

DC 5V 1A

DC 5V 1A

Up to 10m / 33ft

-20C - 60C / -4F - 140F

140 x 76 x 25mm / 5.51 x 2.99 x 0.98

225g / 7.94oz

Charging Your Speaker Please fully charge this speaker before first use. Connect it to a USB charger or charging port with the included micro-USB cable to charge. When all four white LED battery level indicator lights stay on, your speaker is fully charged and ready for use. Charging takes around 2.5 hours.

Powering On / Off Press and hold the power button for 2 seconds to power on or off (LED indicator blue or off)

Pairing 1. When you turn on the speaker, it will automatically enter pairing mode and the LED indicator will start to flash blue rapidly 2. Activate the pairing function on your phone or other compatible device and select AUKEY SK-A2 3. If a code or pin is required for pairing, enter 0000 4. When successfully paired, you will hear a tone and the LED indicator will flash once every 5 seconds

Notes The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired If your paired device is switched off or manually disconnected, the speaker will enter pairing mode and automatically shut down after 10 minutes If the speaker or connected device exceeds the operating range, the speaker will disconnect. The connection to the last successfully connected device will be re-established once you re-enter wireless range within 10 minutes. To connect to other devices, please repeat the previous Pairing steps

Playing Audio via Audio Input Connection Connect the SK-A2 to your PC, laptop, or other device with audio output port using the included 3.5mm audio cable. Turn on the speaker and the flashing blue LED indicator will turn red.

Notes The speaker will disconnect from your phone or other paired devices when an audio cable is plugged into the audio input jack

When playing audio using the audio input jack, short-press the volume + / - to adjust the volume and short-press the multi-function button to play or pause. Next / previous track control on the speaker is disabled in wired mode For some computers, you may need to access the audio control panel to manually set the speaker as the default audio device

Charging Your Devices Connect one end of your charging cable to your devices charging port and the other end to the USB output port on the speaker. Unplug your device when its fully charged. To check the battery level of the speaker, short-press the power button.

Controls & LED Indicators Functions

Play / Pause

Adjust volume

Next / Previous track

Cancel pairing

Answer / End a call

Reject an incoming call

Redial last-called number

Instructions

Short-press multi-function button

Short-press volume + / -

Press and hold volume + / - for 2 seconds

When connected, press and hold the

multi-function button for 2 seconds

Short-press multi-function button

Double-press multi-function button

Double-press multi-function button

LED Status Indicator

Blue flashing rapidly

Blue flashing once every 5 seconds

Red

Product Care & Use Keep away from liquids, extreme heat, and strong magnetic fields Do not use this speaker at high volume for extended periods, as this may cause permanent hearing damage or loss

Warranty & Customer Support For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number.

Amazon US orders: support.us@aukey.com Amazon EU orders: support.eu@aukey.com Amazon CA orders: support.ca@aukey.com Amazon JP orders: support.jp@aukey.com

*Please note, AUKEY can only provide after sales service for products purchased directly from

AUKEY. If you have purchased from a different seller, please contact them directly for service or

warranty issues.

Status

Pairing mode

Connected / Playing music / In call

Audio input mode

Notice for US Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation

FCC Rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help

Caution Changes or modifications made to this device not expressly approved by AUKEY may void the FCC authorization to operate this equipment.

Vielen Dank fr Ihren Kauf von AUKEY SK-A2 Tragbarer Drahtloser Lautsprecher. Lesen Sie bitte diese Bedienungsanleitung sorgfltig durch und bewahren im sicheren Platz fr zuknftige Referenz auf. Sollten Sie jegliche Untersttzung brauchen, kontaktieren Sie bitte unser Support-Team mit Ihrer Produktmodellnummer und Amazon-Bestellnummer.

Lieferumfang Tragbarer Drahtloser Lautsprecher Micro-USB-Kabel 3.5mm Audiokabel Bedienungsanleitung Garantiekarte

Produkt-Diagramm Power-Taste

Multifunktion-Taste

LED Status Anzeige

LED Batteriestand Anzeige

Micro-USB Eingang

USB-Ausgang

3.5mm Aux-in Buchse

Lautstrke - / Vorheriger Titel

Lautstrke + / Nchster Titel

Mikrofon

Spezifikationen Modell

Technologie

Ausgangsleistung

Frequenz

Ladedauer

Spielzeit

Akku-Typ

Micro-USB Eingang

USB Ausgang

Betriebsreichweite

Betriebstemperatur

Abmessungen

Gewicht

SK-A2

BT 4,2, A2DP, AVRCP, HSP, HFP

2 x 3,5W

2,4 - 2,48GHz

2,5 Stunden

6 Stunden (mit 50% Lautstrke)

Li-Polymer (2200mAh)

DC 5V 1A

DC 5V 1A

Bis zu 10m / 33ft

-20C - 60C / -4F - 140F

140 x 76 x 25mm / 5,51 x 2,99 x 0,98

225g / 7,94oz

Aufladen Laden Sie bitte diesen Lautsprecher vor dem ersten Gebrauch auf. Zum Aufladen, schlieen Sie ihn an eine USB-Stromquelle mit mitgeliefertem Micro-USB-Kabel an. Wenn die alle vier weien LED Batteriestand Anzeige aufleuchten, ist Ihr Lautsprecher voll aufgeladen und betriebsbereit. Die Aufladung dauert ca. 2,5 Stunden.

Ein / Ausschalten halten Sie die Power-Taste fr 2 Sekunden lang gedrckt ,um ein/auszuschalten. (LED-Anzeige wird blau aufleuchten oder nicht)

Kopplung 1. Wenn Sie den Lautsprecher einschalten, wechselt der Lautsprecher automatisch in den Kopplung-Modus und beginnt die LED-Anzeige blau schnell zu blinken 2. Aktivieren Sie die Kopplung-Funktion Ihres Handys oder anderen kompatiblen Gete und whlen AUKEY SK-A2 aus 3. Wenn ein Code oder Pin fr Kopplung erforderlich ist, geben Sie bitte 0000 4. Wenn erfolgreich gekoppelt, werden Sie eine Sprachansage hren und wird die LED-Anzeige blinkt einmal alle 5 Sekunden

Hinweise Der Lautsprecher wird sich nach 10 Minuten im Kopplung-Modus automatisch ausschalten, wenn keine Gerte gekoppelt sind Wenn Ihr gekoppeltes Gert ausgeschaltet oder getrennt ist, wird der Lautsprecher in Kopplung Modus gehen und sich nach 10 Minuten automatisch ausschalten Wenn der Lautsprecher die Reichweite berschreitet, wird er trennen und in den Standby-Modus gehen. Die Verbindung wird wieder hergestellt, sobald Sie die drahtlose Reichweite innerhalb von 10 Minuten zurckgehen. Der Lautsprecher wird mit dem letzten erfolgreichen gekoppelten Gert neu koppeln. Um mit anderen Gerten zu koppeln, wiederholen Sie bitte die vorherige KopplungSektion

Audio per Audioeingang abspielen Schlieen Sie das SK-A2 an Ihren PC oder Laptop mithilfe von dem mitgelieferten 3.5mm Audiokabel an. Schalten Sie den Lautsprecher ein und die blinkende blaue LED-Anzeige wird rot leuchten.

Hinweise Der Lautsprecher wird von Ihrem Telefon oder anderen gekoppelten Gerten getrennt, wenn ein Audiokabel in den Aux-Port eingesteckt ist Wenn Sie Audio mit der Audioeingangsbuchse abspielen, drcken Sie kurz die Lautstrke + / -, um die Lautstrke einzustellen und drcken Sie kurz die Multifunktion-Taste zum abspielen oder pausieren. Der nchste / vorherige Titel am Lautsprecher ist in Wired-Modus verboten Fr einige Computer, knnten Sie mglicherweise auf das Audio-Bedienfeld zugreifen, um den Lautsprecher als Standard-Audiogert manuell einzustellen

Aufladen fr Ihr Gert Verbinden Sie ein Ende des Ladekabels mit dem Ladeanschluss des Gerts und das andere Ende mit dem USB-Ausgang des Lautsprechers. Ziehen Sie das Gert aus der Steckdose, wenn es vollstndig aufgeladen ist. Um den Batteriestand des Lautsprechers zu berprfen, drcken Sie kurz die Power-Taste.

Kontroll & LED Anzeige Funktionen Play / Pause Lautstrke einstellen

Nchster / vorheriger Titel

Kopplung abbrechen

Anruf beantworten / beenden

Eingehenden Anruf abweisen

Letzte Nummer Wahlwiederholung

Anzeige Drcken Sie kurz die Multifunktion-Taste Drcken Sie kurz die Lautstrke + / - Halten Sie die Lautstrke + / - fr 2 Sekunden lang gedrckt Wenn gekoppelt, halten Sie die Multifunktion-Taste fr 2 Sekunden lang gedrckt Drcken Sie kurz die Multifunktion-Taste Doppelklicken Sie auf die Multifunktion-Taste Doppelklicken Sie auf die Multifunktion-Taste

LED Status Anzeige

Blau schnell blinken

Blau blinkt einmal alle 5 Sekunden

Rot

Status

Kopplung-Modus

Gekoppelt / Musik abspielen / In Anruf

Audioeingang-Modus

Produktpflege Halten von Flssigkeiten, extremer Hitze, und starken Magnetfeldern weg Bitte nicht den Lautsprecher mit hohen Lautstrke fr eine lange Zeit verwenden, sonst knnte es zu einer dauerhaften Schwerhrigkeit oder der Verlust des Gehrs

Garantie & Kundendienst Fr Fragen, Untersttzungen, oder Garantieansprche kontaktieren Sie bitte uns per die folgende E-Mail-Adresse. Bitte geben Sie uns dabei Ihre Amazon-Bestellnummer und Produktmodellnummer

Amazon EU orders: support.eu@aukey.com

*Achten Sie bitte darauf, dass AUKEY nur Kundendienst fr die Produkte anbieten kann, die direkt von

AUKEYverkauft werden. Wenn Sie von anderem Verkufer gekauft haben, kontaktieren Sie bitte mit

dem direkt fr Dienst oder Garantieansprche

Merci davoir achet AUKEY SK-A2 Haut-parleur Portable sans Fil. Veuillez lire attentivement ce mode demploi et le conserver pour rfrence future. Si vous avez besoin des aides, veuillez contacter notre quipe de service client avec le numro de modle et votre numro de commande Amazon.

Contenu de lEmballage Haut-parleur Portable sans Fil Cble Micro-USB Cble Audio 3,5mm Mode dEmploi Carte de Garantie

Diagramme du Produit Bouton d'Alimentation

Bouton Multifonction

Indicateur LED

Indicateur de Niveau de Batterie LED

Entre Micro-USB

Sortie USB

Prise d'Entre Audio 3,5 mm

Volume + / Piste Suivante

Volume - / Piste Prcdente

Microphone

Spcifications Modl

Technologie

Puissance de Sortie Audio

Frquence de Rponse

Temps de Charge

Temps de Lecture

Type de Batterie

Entre Micro-USB

Sortie USB

Plage sans Fil

Temprature de Fonctionnement

Dimensions

Poids

SK-A2

BT 4.2, A2DP, AVRCP, HSP, HFP

2 x 3,5W

2,4 -2,48 GHz

2,5 heures

6 heures (au volume 50%)

Li-ion (2200mAh)

DC 5V 1A

DC 5V 1A

Jusqu 10m / 33ft

-20C - 60C / -4F - 140F

140 x 76 x 25mm / 5,51 x 2,99 x 0,98

225g / 7,94oz

Chargement Chargez compltement ce haut-parleur avant la premire utilisation. Connectez-le un chargeur USB ou un port de charge avec le cble micro-USB inclus pour le charger. Lorsque les quatre indicateurs LED blanches de niveau de batterie restent allums, votre haut-parleur est compltement charg et prt l'emploi. Le chargement dure environ 2,5 heures.

Source dAlimentation (allumer /teindre ) Appuyer et maintenez sur le bouton d'alimentation pendant 2 secondes pour allumer ou teindre (Indicateur LED bleu ou teint)

Appariement 1. Lorsque vous allumez le haut-parleur, il entrera automatiquement en mode d'appariement et l'indicateur LED clignotera rapidement en bleu 2. Activez la fonction d'appariement sur votre tlphone ou tout autre appareil compatible avec l'appariement et slectionnez AUKEY SK-A2 3. Si un code ou PIN est ncessaire pour l'association, entrez "0000" 4. Lorsqu'il est associ avec succs, vous entendrez une tonalit et l'indicateur LED clignotera une fois toutes les 5 secondes

Notes Le haut-parleur s'teint automatiquement aprs 10 minutes en mode d'appariement si aucun priphrique n'est associ Si votre appareil associ est teint ou dconnect manuellement, le haut-parleur en mode d'appariement steint automatiquement aprs 10 minutes Si le haut-parleur ou l'appareil connect dpasse la plage de fonctionnement, il se dconnectera. La connexion au dernier priphrique connect avec succs sera rtablie une fois que vous entrez dans la gamme sans fil dans les 10 minutes. Pour vous connecter d'autres appareils, rptez les tapes prcdentes de lappariement

Lecture Audio via la Connexion d'Entre Audio Branchez le SK-A2 votre PC, ordinateur portable ou tout autre appareil avec le port de sortie audio l'aide du cble audio de 3,5 mm inclus. Allumez le haut-parleur et l'indicateur LED clignotant bleu devient rouge.

Notes Le haut-parleur se dconnecte de votre tlphone ou d'autres appareils apparis lorsqu'un cble audio est branch sur la prise d'entre audio Lorsque l'audio l'aide de la prise d'entre audio, appuyez brivement sur Volume + / - pour rgler le volume et appuyez brivement sur le bouton multifonction pour jouer ou mettre en pause. Le contrle de piste suivant / prcdent sur le haut-parleur est dsactiv en mode filaire Pour certains ordinateurs, vous devrez peut-tre accder au panneau de contrle audio pour configurer manuellement le haut-parleur comme priphrique audio par dfaut

Chargement de vos appareils Connectez une extrmit de votre cble de chargement au port de chargement de votre appareil et l'autre extrmit au port de sortie USB sur le haut-parleur. Dbranchez votre appareil lorsqu'il est compltement charg. Pour vrifier le niveau de batterie du haut-parleur, appuyez brivement sur le bouton d'alimentation.

Oprations & Indicateur LED Fonctions

Jouer / Pause

Rgler le volume

Piste Suivant / prcdente

Annuler l'appariement

Rpondre / Terminer un appel

Rejeter un appel entrant

Rappeler du numro dernier

Oprations

Appuyez brivement le button multifonction

Appuyez brivement Volume + / -

Appuyez et maintenez sur volume + / - pour 2

secondes

Une fois connect, appuyez et maintenez sur

le button multifonction pour 2 secondes

Appuyez brivement le button multifonction

Appuyez deux fois le button multifonction

Appuyez deux fois le button multifonction

Indicateur LED

Bleu clignote rapidement

Bleu clignotement une fois toutes

les 5 secondes

Rouge

Etat

Mode d'appariement

Connect / Jouer de la Musique

/ Appel

Mode audio entre

Entretien du Produit & Utilisation Tenir l'cart des liquides, la chaleur extrme, et des champs magntiques puissants Ne pas utiliser ce haut-parleur volume lev pendant des priodes prolonges, car cela pourrait causer des dommages auditifs permanents ou perte

Garantie & Service Client Pour des questions, soutiens ou demandes de garanties, veuillez nous contacter ladresse ci-dessous qui correspond votre rgion. Veuillez inclure votre numro de commande Amazon et le numro de modle du produit.

Amazon EU orders: support.eu@aukey.com

*Veuillez noter que, AUKEY ne peut fournir le service aprs-vente que pour les produits achets

directement chez AUKEY. Si vous avez achet des produits auprs dun vendeur diffrent, veuillez le

contacter pour tous les services ou questions de garantie.

Gracias por comprar AUKEY SK-A2 Altavoz Inalmbrico Porttil. Lea tentamente el manual usuario por favor y consrvelo para las consultas futuras. Si necesita cualquier ayuda, pngase en contacto con nuestro equipo de servicio con su nmero de modelo del producto y su nmero de orden de Amazon.

Contenidos del Paquete Altavoz Inalmbrico Porttil Micro-USB Cable 3.5mm Audio Cable Manual Usuario Tarjeta de Garanta

Diagrama del Producto

Botn de Encendido

Botn de Multi-Funcin

LED Indicador de Estado

LED Indicador de Nivel de Batera

Entrada de Micro-USB

Salida USB

3.5mm Toma de Entrada de Audio

Volumen + / Pista Siguiente

Volumen - / Pista Anterior

Micrfono

Especificasiones Modelo Tecnologa Potencia de Salida de Audio Rango de Frecuencia Tiempo de Cargar Tiempo de Reproducir Tipo de Batera Entrada de Micro-USB Salida USB Rango de Operacin Temperatura de Operacin Dimensiones Peso

SK-A2 BT 4.2, A2DP, AVRCP, HSP, HFP 2 x 3,5W 2,4 - 2,48GHz 2,5 horas 6 horas (en 50% volumen) Li-ion (2200mAh) DC 5V 1A DC 5V 1A Fino a 10m / 33ft -20C - 60C / -4F - 140F 140 x 76 x 25mm / 5,51 x 2,99 x 0,98 225g / 7,94oz

Cargar Su Altavoz Cargue completamente este altavoz antes de usarlo por primera vez por favor. Conctelo a un cargador USB o puerto de carga con el cable micro-USB incluido para cargar. Cuando todos los cuatro blancos indicadores de luz del nivel de batera estn encendidos, el altavoz est cargado completamente y listo para su uso. La carga dura alrededor de 2,5 horas.

Encender / Apagar Mantenga presionado el botn de encendido durante 2 segundos para encender o apagar (LED indicador est en azul o en apagado)

Emparejamiento 1. El altavoz entrar en el modo de emparejamiento automticamente y el LED indicador comenzar a parpadear en azul rpidamente cuando se enciende por ustede 2. Active la funcin de emparejamiento en su telfono u otro dispositivo compatible y seleccione AUKEY SK-A2 3. Si se requiere un cdigo o pin para emparejar, ingrese "0000" 4. Escuchar un tono y el LED indicador parpadear una vez cada 5 segundos cuando se empareja correctamente

Notas El altavoz se apagar automticamente despus de 10 minutos en el mode de emparejamiento Si no hay dispositivos estn emparejados Si el altavoz o el dispositivo conectado supera el rango de funcionamiento, el altavoz se desconectar. La conexin al ltimo dispositivo conectado correctamente se restablecer una vez que vuelva a entrar en el alcance inalmbrico en 10 minutos. Para conectarse a otros dispositivos, repita los pasos anteriores de "emparejamiento"

Reproducir Audio a Travs de la Conexin de Entrada de Audio Conecte el SK-A2 a su PC, computadora porttil u otros dispositivos que con el puerto de salida del audio utilizando el cable de audio incluido de 3.5 mm. Encienda el altavoz y el LED indicador se iluminar en rojo.

Notas El altavoz se desconectar del telfono u otros dispositivos emparejados cuando se conecta un cable de audio a la toma de entrada de audio Cuando reproducir el audio utilizando la toma de entrada de audio, pulse brevemente el volumen + / - para ajustar el volumen y presione brevemente el botn multi-funcin para reproducir o pausar. El control de pista siguiente / anterior en el altavoz est deshabilitado en modo cableado Para algunos ordenadores, es posible que necesite acceder al panel de control de audio para configurar manualmente el altavoz como el dispositivo de audio predeterminado

Cargar Sus Dispositivos Conecte un extremo del cable de carga al puerto de carga del dispositivo y el otro extremo al puerto de salida USB del altavoz. Desconecte el dispositivo cuando est completamente cargado. Para comprobar el nivel de batera del altavoz, presione brevemente el botn de encendido.

Controles & LED Indicadores Funciones Reproducir / Pausar Ajustar el volumen

Pista Siguiente / Anterior

Cancelar emparejar

Responder / Finalizar una llamada Rechazar una llamada entrante Volver a marcar el ltimo nmero

Instrucciones Presionar brevemente el botn de multi-funcin Presionar brevemente el volumen + / - Mantener presionado el volumen + / - con 2 segundos Cuando est conectado, mantenga pulsado el botn multi-funcin durante 2 segundos

Presionar brevemente el botn de multi-funcin

Presionar dos veces el botn de multi-funcin

Presionar dos veces el botn de multi-funcin

Estado del LED Indicador

Parpadear rpidamente en azul

Parpadeando una vez cada 5

segundos

Rojo

Estados

Modo de emparejar

Conectado / Reproducir msica /

En llamada

El modo de Entrada de Audio

Cuidado & Uso del Producto Mantener alejado de los lquidos, extremos calores y fuertes campos magnticos No utilice este altavoz a un volumen alto durante un largo tiempo, ya as puede causar dao o prdida permanente del odo

Garanta & Apoyo al Cliente Para preguntas, soportes o reclamaciones de garanta, pngase en contacto con nosotros en la direccin que corresponda con su regin. Se incluya su nmero de orden de Amazon y nmero de modelo del producto por favor.

Amazon EU orders: support.eu@aukey.com

*Tenga en cuenta por favor, AUKEY slo puede proporcionar servicio post-venta para los productos

comprados directamente de AUKEY. Si usted los ha comprado de un vendedor diferente, pngase

en contacto con ellos directamente por cuestiones de servicio o garanta.

Grazie per aver acquistato AUKEY SK-A2 Altoparlante Portatile Wireless. Si prega di leggere attentamente il manuale duso e di conservarlo in un luogo sicuro per le consultazioni in futuro. Se ha bisogno di qualsiasi assistenza, si prega di contattare il nostro gruppo di supporto con il numero del modello del Suo prodotto e il numero d'ordine di Amazon.

Contenuti del Pacco Altoparlante Portatile Wireless Cavo di Micro-USB Cavo dAudio di 3,5mm Manuale dUso Certificato di Garanzia

Diagramma del Prodotto Pulsante di Potenza

Pulsante Multifunzionale

Indicatore LED di Stato

Indicatore LED del Livello di Batteria

Porta di Micro-USB

Uscita di USB

Jack dIngresso per Audio da 3,5mm

Volume + / Traccia Successiva

Volume - / Traccia Precedente

Microfono

Specificazioni Modello

Tecnologia

Potenza dUscita dellAudio

Gamma di Frequenza

Tempo di Carica

Tempo di Gioco

Tipo di Batteria

Porta di Micro-USB

Uscita di USB

Gamma dOperazione

Temperatura dOperazione

Dimensioni

Peso

SK-A2

BT 4.2, A2DP, AVRCP, HSP, HFP

2 x 3,5W

2.4 - 2.48GHz

2,5 Ore

6 Ore (al 50% volume)

Li-ion (2200mAh)

DC 5V 1A

DC 5V 1A

Fino a 10m / 33ft

-20C - 60C / -4F - 140F

140 x 76 x 25mm / 5,51 x 2,99 x 0,98

225g / 7,94oz

Carica Si prega di caricare completamente questo altoparlante prima del primo uso. Collegarlo ad unalimentazione USB con il cavo Micro-USB incluso per la carica. Quando tutti quattro indicatori LED del livello di batteria rimangono accesi, l'altoparlante completamente carico e pronto per l'uso. Ci vuole circa 2,5 ore per ricaricare.

Acceso / Spento Premere e tenere il pulsante di potenza per 2 secondi per accendere o spegnere (indicatore LED blu o spento)

Appaiamento 1. Quando si accende l'altoparlante, entrera automaticamente in modalit di accoppiamento e l'indicatore LED lampeggia rapidamente in blu 2. Attivare la funzione dappaiamento del Suo telefono o altro dispositivo compatibile daccoppiamento e scegliere AUKEY SK-A2 3. Se richiesto un codice o un pin per lappaiamento, si prega dinserire 0000 4. Quando appaiato con successo, si sentir un tono e l'indicatore LED lampegger ogni 5 secondi

Nota Laltoparlante si spegne automaticamente dopo 10 minuti in modalit dappaiamento se nessun dispositivo viene appaiato Se il Suo dispositivo accoppiato disattivato o scollegato manualmente, l'altoparlante entra in modalit daccoppiamento e si spegne automaticamente dopo 10 minuti Se laltoparlante o dispositivo collegato supera la gamma doperazione, pu perdere la connessione. Laltoparlante ricollega automaticamente lultimo dispositivo appaiato con successo. La connessione viene ristabilita una volta che si ritorna alla gamma wireless entro 10 minuti. Per collegare gli altri dispositivi, si prega di ripetere la precedente sezione Appaiamento

Trasmettere lAudio tramite Ingresso dAudio Collegare il SK-A2 al Suo PC, laptop, o altro dispositivo con il 3,5mm cavo daudio incluso. Accendere l'altoparlante e l'indicatore LED blu lampeggiante diventa rosso.

Nota L'altoparlante si scollega dal telefono o altri dispositivi accoppiati, quando un cavo daudio inserito nellingresso daudio. Quando si trasmette laudio usando in jack dingresso audio, premere brevemente il volume + / - per regolare il volume e premere a breve il pulsante multifunzionale per trasmettere o mettere in pausa. Il controllo della traccia successiva / precedente sull'altoparlante proibito in modalit cablata Per alcuni computer, necessario accedere il pannello di controllo daudio per impostare manualmente laltoparlante come il dispositivo daudio predefinito

Carica di Dispositivi Collegare un'estremit del cavo di ricarica alla porta di carica del dispositivo e l'altra estremit alla porta di uscita USB dell'altoparlante. Scollegare il dispositivo quando completamente carico. Per controllare il livello della batteria dell'altoparlante, premere brevemente il pulsante di potenza.

Controlli & Indicatori LED Funzioni Trasmettere / Pausa Regolare il volume Traccia successiva / precedente

Cancellare lappaiamento

Rispondere / Terminare una chiamata

Rifiutare una chiamata in arrivo

Rifare lultimo numero

Istruzioni Premere brevemente il pulsante multifunale Premere brevemente il volume + / - Tenere premuto il volume + / - per 2 secondi Quando collegato, tenere premuto il pulsante multifunzionale per 2 secondi

Premere brevemente il pulsante multifunale

Premere due volte il pulsante multifunzionale Premere due volte il pulsante multifunzionale

Indicatore di LED Stato

Blu lampeggia rapidamente

Blu lampeggia ogni 5 secondi

Rosso

Stati

Modalit dappaiamento

Collegato / Trasmettere musica /

In chiamata

Modalit dingresso audio

Cura & Uso del Prodotto Allontanarsi dai liquidi, dal calore estremo e dai forti campi magnetici Non usare questo laltoparlante ad alto volume per periodi prolungati, poich ci pu causare danni permanenti all'udito o perdere ludito

Garanzia & Assistenza ai Clienti Per domande, assistenza, supporto o richieste di garanzia, si prega di contattarci al seguente indirizzo che corrisponde alla Sua regione. Si prega dinserire il Suo numero dordine di Amazon e di modello dei prodotti.

Ordini di Amazon EU: support.eu@aukey.com

*Si prega di notare che AUKEY pu offrire solo il servizio di post-vendita per i prodotti acquistati

direttamente da AUKEY. Se ha acquistato da un venditore diverso, si prega di contattarlo direttamente

per problemi di servizio o di garanzia.

AUKEY SK-A2

Micro USB 3.5mm

LED

LED

Micro-USB

USB

3.5mm

+/

-/

Micro-USB USB

SK-A2 BT 4.2, A2DP, AVRCP, HSP, HFP 2 x 3.5W 2.4 - 2.48GHz 2.5 6 (50) (2200mAh) DC 5V 1A DC 5V 1A 10m -20C - 60C 140 x 76 x 25mm 225g

Micro USBUSBUSBMicro USB Micro USB4LED 2.5

ON/OFF 2/(LED/ )

1. ON LED 2. AUKEY SK-A2 3. 0000 4. LED5

10 OFF 10OFF 10m 10 10

AUX 3.5mmPC ONLED

3.5mmAUXPC

3.5mmAUX /-/ Aux/

USBUSB

LED / /

/

/- /-2 2 2 2

LED LED LED5 LED

//

E: support.jp@aukey.com

*AUKEY

User Manual Portable Wireless Speaker

<

Manualsnet FAQs

If you want to find out how the SK-A2 Aukey works, you can view and download the Aukey SK-A2 Speaker User Manual on the Manualsnet website.

Yes, we have the User Manual for Aukey SK-A2 as well as other Aukey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Aukey SK-A2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Aukey SK-A2 Speaker User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Aukey SK-A2 Speaker User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Aukey SK-A2 Speaker User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Aukey SK-A2 Speaker User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Aukey SK-A2 Speaker User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.