Aukey LT-SL1 Light User Manual PDF

1 of 1
1 of 1

Summary of Content for Aukey LT-SL1 Light User Manual PDF

User Manual

Model: LT-SL1

AUKEY INTERNATIONAL LIMITED Web: www.aukey.com E-mail: support@aukey.com Add: No.102, Building P09, Electronic Trade Center Huanan City, Pinghu Town, Longgang District Shenzhen, Guangdong 518111 CN

Solar Energy Wall Light English

Deutsch

Franais

Espaol

Italiano

Contents Model: LT-SL1

01~04

05~08

09~12

13~16

17~20

21~24

- 01 -

Introduction Thank you for choosing Aukey LT-SL1 Solar Energy Wall Light. Please read the user manual carefully and keep it for future reference. If you need further assistance, please contact Aukey customer support by email at support@aukey.com.

Package Contents 1 x Aukey Solar Energy Wall Light 2 x Screws 1 x User Manual 1 x 24 Month Warranty Card

User Manual

Warranty Card

Specifications Model Material Power Consumption LED Model LED Quantity Solar Panel Battery Type Waterproof Rating CCT CRI Luminous Flux Induction Distance Induction Angle Net Weight Dimension Life Span Charging Time

Working Hours

LT-SL1 ABS + PC 4W SMD2835 36 Pcs 6V 2.5W 18% efficiency Li-ion Rechargeable battery( 3.7V/ 4000mAh) IP65 6000K 70-80Ra 500lm 5 - 10m 120 433g/ 0.95Ib 21011585mm/ 8.274.533.35in 50000 hours >6 Hours Mode 1: it depends on how long the bight light stays on. It can be over 30 hours under normal use.

Mode 2: it depends on how long the bright light stays on. It can be over 30 hours under normal use.

Mode 3: 5 hours when it is fully charged.

- 02 - - 03 - - 04 -

Product Overview 1. Solar Panel 2. PIR Detector 3. Power/ Mode Button 4. LED Panel

Installation The distance between the two hanger hole is 12cm (4.72in). Please be sure the screws are at the appropriate place before you screw them to the wall.

Note: We strongly recommend our dear customers to hang the solar light on the place where there is no shelter or glass on the top. And it may function better when the solar light faces south or north where it can get more sun exposure and charging hours.

+

12cm

Working Process It is an on and off cycle through 3 modes by pressing the Power/ Mode button. When the ambient luminous is below 200lux, dusk to dawn, for example, the solar light will function automatically when it is set on mode 1 or 2.

Mode 1: motion induction+dim light when motion is detected, the dim light will turn to bright light.

Mode 2: motion induction When motion is detected, the solar light will be turned on and it is bright light.

Mode 3: bright light only

Condition

Mode 1

Mode 2

Mode 3

Off

Operation

Press and hold the Power button about 3s to turn on the solar light

and it is mode 1 already.

Press the Power button to go to mode 2

Press the Power button to go to mode 3

Press the Power button lastly, it will turn itself off

PIR Detector

Not triggered

Triggered

Not triggered

Triggered

Nil

Nil

Lighting

Stay on dim light

Bright light

Off

Bright light

Stay on bright light

Nil

Duration ( when last motion was detected)

20 secs

20 secs

5 hrs when it is fully charged

Nil

Charging Please fully charge the device before first use.

Please charge the solar light every 3 months when the device is rarely used or not used in case the battery will be damaged during the long time.

When the solar light is flashing, it means the battery is running low. Please recharge it for further use. The time duration of solar light strongly depends on sun exposure and charging hours under sunlight. The stronger sun exposure and longer charging hour is, the faster and longer duration of the battery is.

Note: The solar light charges even on cloudy days, but bad weather condition may weaken the battery life of solar light.

Cautions Do not repair, disassemble, or modify under any circumstances.

Keep the device away from fire in order to avoid explosion or leakage.

Do not immerse the device into water.

Any severe shock to the device is not recommended.

Warranty Aukey provides all our customers 24 months warranty from the date of its original purchase. If the device fails due to manufacturer defects, please contact us by email at support@aukey.com or support.uk@aukey.com or support.ca@aukey.com to launch a warranty claim. We will instruct you on how to return the product for repair/replacement. We only provide after sales support for products purchased from Aukey or Aukey authorized distributors. If you have purchased the product from a seller other than Aukey, please contact your seller for warranty cover.

Contact us For all inquiries, please contact us with your order number for dealing with the issue quicker. US: support@aukey.com UK: support.uk@aukey.com CA: support.ca@aukey.com Website: www.aukey.com

- 09 -

Introduction Merci d'avoir choisi Aukey LT-SL1 Lampe Murale nergie Solaire. Veuillez lire attentivement le mode d'emploi et le conserver pour la future rfrence. Si vous avez besoin d'aide, merci de contacter le soutien la clientle de Aukey par courriel support@aukey.com.

Contenu de lemballage 1 x Aukey Lampe Murale nergie Solaire 2 x Vis 1 x Mode demploi 1 x Carte de Garantie de 24 Mois

User Manual

Warranty Card

Spcifications Modle Matriel Consommation de Puissance Modle LED Quantit de LED Panneau Solaire Type de Batterie Niveau Impermable CCT CRI Flux Lumineux Distance dInduction Angle dInduction Poids Net Dimension Dure de Vie Temps de Charge

Heures de Travail

LT-SL1 ABS + PC 4W SMD2835 36 Pcs 6V 2.5W 18% fficacit Li-ion Batterie Rechargeable ( 3.7V/ 4000mAh) IP65 6000K 70-80Ra 500lm 5 - 10m 120 433g/ 0.95Ib 21011585mm/ 8.274.533.35in 50000 heures >6 Heures Mode 1: dpend de combien de temps la lumire brillante reste allume, et normalement plus de 30 heures. Mode 2: dpend de combien de temps la lumire brillante reste allume, normalement plus de 30 heures. Mode 3: 5 heures lorsquelle est compltement charge.

- 10 - - 11 - - 12 -

Schma du Produit 1. Panneau Solaire 2. Dtecteur PIR 3. Bouton de Puissance / Mode 4. Panneau LED

Installation La distance entre les deux trous de suspension est de 12cm (4.72in). Assurez-vous que les vis sont l'endroit appropri avant de les visser au mur.

Remarque: Nous vous recommandons fortement d'accrocher la lampe solaire sur le lieu o il n'y a pas d'abri ou de verre en dessus. Et il peut mieux fonctionner lorsque la lampe solaire est oriente au sud ou au nord o il peut obtenir plus dexposition au soleil et heures de charge.

+

12cm

Processus de Travail Il est un cycle allum et teint par 3 modes en appuyant sur le bouton Puissance / Mode. Lorsque la lumire ambiante est infrieure 200lux, par exemple, du crpuscule l'aube, la lampe solaire fonctionne automatiquement quand elle est rgle sur le mode 1 ou 2.

Mode 1: induction de mouvement + lumire faible lorsqu'un mouvement est dtect, la flumire faible se transformera vers la lumire brillante.

Mode 2: induction de mouvement Lorsqu'un mouvement est dtect, la lampe solaire sera allume et il sera la lumire brillante.

Mode 3: seulement lumire brillante

tat

Mode 1

Mode 2

Mode 3

Off

Opration

Appuyez sur le bouton dalimentation et le maintenez pendant

3s pour allumer la lampe solaire, et il est

dj en mode 1.

Appuyez sur le bouton dalimentation pour

passer en mode 2

Appuyez sur le bouton dalimentation pour

passer en mode 3

Appuyez finalement sur le bouton

dalimentation, elle va steindre

Dtecteur PIR

Non dclench

Dclench

Non dclench

Dclench

Nant

Nant

clairage

Rester sur la lumire faible

Lumire brillante

Off

Lumire brillante

Rester sur la lumire brillante

Nant

Dure (lors de la dernire

action a t dtecte)

20 secondes

20 secondes

5 heures lorsquelle est

compltement charge

Nant

Charge Recharger compltement l'appareil avant de la premire utilisation.

Recharger la lampe solaire tous les 3 mois lorsque l'appareil est rarement utilis ou non utilis pour viter lendommagement de la batterie pendant le long temps.

Lorsque la lampe solaire clignote, cela signifie que la batterie est faible. Veuillez la recharger pour une utilisation ultrieure. La dure de la lampe solaire dpend fortement de l'exposition au soleil et des heures de charge sous la lumire du soleil. L'exposition au soleil plus forte et lheure de charge plus longue, la dure de la batterie sera plus longue et plus rapide.

Remarque: La lampe solaire se charge mme dans le temps nuageux, mais la condition du mauvais temps peut affaiblir le charge du panneau solaire.

Prcaution Ne pas rparer, dmonter ou modifier sous aucun prtexte.

Gardez l'appareil loin du feu afin d'viter des fuites ou une explosion.

Ne pas plonger l'appareil dans l'eau.

Tous les chocs graves l'appareil sont dconseills.

Garantie Aukey fournit tous nos clients une garantie de 24 mois compter de la date de son achat initial. Si l'appareil tombe en panne en raison de dfauts de fabrication, veuillez nous contacter par courriel support@aukey.com pour lancer une demande de garantie. Nous vous donnerons des instructions sur la faon de retourner le produit pour rparation / remplacement.

Nous ne fournissons le support aprs-vente que pour les produits achets chez Aukey ou distributeurs agrs par Aukey. Si vous avez achet le produit auprs d'un vendeur autre que Aukey, merci de contacter votre vendeur pour la couverture de garantie.

Contactez-nous Pour toutes les demandes de renseignements, merci de nous contacter avec votre numro de commande pour rgler le problme plus rapidement. E-mail: support@aukey.com Site Web: www.aukey.com

- 13 -

Introduccin Gracias por elegir Aukey LT-SL1 Energa Solar Luz de pared. Por favor, lea el manual del usario cuidadosamente y consrvelo para consultarlo en el futuro. Si necesita ms ayuda, pngase en contacto con atencin al cliente Aukey por correo electrnico a support@aukey.com.

Contenidos del Paquete 1 x Aukey Energa Solar Luz de pared 2 x Empulgueras 1 x Manual de Usario 1 x Tarjeta de Garanta de 24 meses

User Manual

Warranty Card

Especificaciones Modelo Material Consumo de energa Modelo de LED Cantidad de LED Panel Solar Tipo de Batera Grado impermeable CCT CRI Flujo luminoso Distancia Induccin: ngulo induccin Peso Neto Dimensin Esperanza de vida Tiempo de carga

Horas laborales

LT-SL1 ABS + PC 4W SMD2835 36 Pcs 6V 2.5W Eficiencia 18% Li-ion Batera recargable( 3.7V/ 4000mAh) IP65 6000K 70-80Ra 500lm 5 - 10m 120 433g/ 0.95Ib 21011585mm/ 8.274.533.35in 50000 horas >6 Horas Modo 1: depende de la duracin de la luz brillante permanece encendida, normalmente puede ser ms de 30 horas. Modo 2: depende de la duracin de la luz brillante permanece encendida, normalmente puede ser ms de 30 horas. Modo 3: 5 horas cuando est completamente cargada.

- 14 - - 15 - - 16 -

Descripcin del Producto 1. Panel Solar 2. Detector PIR 3. Botn Energa/Modo 4. Panel LED

Instalacin La distancia entre el agujero de dos percha es 12 cm (4.72in). Por favor, asegrese de que los tornillos estn en el lugar adecuado antes de insertarlos en la pared.

Nota: Recomendamos que pone la luz solar en el lugar donde no hay refugio o de vidrio en la parte superior. Y funcionar mejor cuando la luz solar est orientada al sur o al norte, donde se puede obtener ms exposicin al sol y las horas de carga.

+

12cm

Proceso de trabajo Se trata de un ciclo de encendido y apagado a travs de 3 modos pulsando el botn de encender / modo. Cuando el luminoso ambiente es menos de 200 lux, atardecer hasta el amanecer, por ejemplo, la luz solar funcionar automticamente cuando se encuentra en modo de 1 o 2.

Modo 1: induccin de movimiento + luz tenue Cuando se detecta movimiento, la luz tenue se convertir a la luz brillante.

Modo 2: induccin de movimiento

Modo 3: Slo luz brillante

Condicin

Mode 1

Modo 2

Modo 3

Apagado

Operacin

Mantenga pulsado el Botn de encender por 3s para encender la luz solar

y ya es el modo 1.

Pulse el botn de encender para ir

al modo 2

Pulse el botn de encender para ir

al modo 3

Pulse el botn de encender, al final,

se apagar

Detector PIR

No desencadenado

desencadenado

No desencadenado

desencadenado

Nulo

Nulo

Iluminacin

Permanece en luz tenue

Luz Brillante

Apagado

Luz Brillante

Stay on bright light

Nulo

Duracin (cuando se detect la ltima accin)

20 segundos

20 segundos

5 horas cuando est

completamente cargada

Nulo

Carga Por favor, cargue completamente el dispositivo antes usar por primera vez.

Por favor, cargue la luz solar cada 3 meses cuando el dispositivo se utiliza muy poco o no utiliza en caso de que la batera se da durante un largo tiempo.

Cuando la luz solar est parpadeando, significa que la batera se est agotando. Por favor recrguela para su uso posterior.

El tiempo de duracin de la luz solar depende de gran medida de la exposicin al sol y las horas de carga bajo la luz solar. La exposicin al sol ms fuerte y horas de carga es ms largo, la duracin ms rpido y ms larga de la batera es.

Nota: Los cargodores de luz solar, incluso en los das nublados o malas condiciones de tiempo pueden debilitar la carga del panel solar.

Precauciones No repare, desmonte o modifique en cualquier situacin.

Mantenga el dispositivo lejos del fuego para evitar explosiones o fugas.

No sumerja el dispositivo en agua.

No se recomienda cualquier choque severo al dispositivo.

Garanta Aukey ofrece a todos nuestros clientes 24 meses de garanta desde la fecha de la primera compra. Si el dispositivo falla debido a defectos de fabricacin, por favor pngase en contacto con nosotros por correo electrnico a support@aukey.com para iniciar un reclamo de garanta. Nosotros le informaremos sobre cmo devolver el producto para la reparacin / reemplazo.

Slo proporcionamos soporte post-venta para los productos comprados a Aukey o Aukey distribuidores autorizados. Si ha comprado el producto de un vendedor que no sea Aukey, por favor contacte con su vendedor para obtener cobertura de la garanta.

Contctenos Para todas las consultas, por favor pngase en contacto con nosotros con su nmero de pedido para hacer frente a la cuestin ms rpido.

E-mail:support@aukey.com Website: www.aukey.com

- 17 -

Introduzione Grazie per la Sua selta di Aukey LT-SL1 Aukey Lampada Solare da Parete. Si prega di leggere con attenzione questo manuale e tenerlo bene per il riferimento futuro. Se ha bisogno di ulteriore assistenza, si prega di contattare il Servizio di Clienti di Aukey tramite lemail a support@aukey.com.

Contenuto di Pacchetto 1 x Aukey Lampada Solare da Parete 2 x Viti 1 x Manuale dIstruzione 1 x Carta di Garanzia per 24 Mesi

User Manual

Warranty Card

Specificazioni Modello Materiale Consumo di Potenza Modello di LED Quantit di LED Pannello Solare Tipo di Batteria Classificazione dImpermeabile CCT CRI Flusso Luminoso Distanza dInduzione Angolo dInduzione Peso Netto Dimensione Durata di Lavoro Tempo di Ricarica

Tempo di Lavoro

LT-SL1 ABS + PC 4W SMD2835 36 Pcs 6V 2.5W 18% efficienza Li-ion Batteria Ricaricabile ( 3.7V/ 4000mAh) IP65 6000K 70-80Ra 500lm 5 - 10m 120 433g/ 0.95Ib 21011585mm/ 8.274.533.35 pollici 50000 Ore >6 Ore Modalit 1: Dipende dal tempo che sta la luce luminosa, si pu superare normalmente 30 ore. Modalit 2: Dipende dal tempo che sta la luce luminosa, si pu superare normalmente 30 ore. Modalit 3: 5 ore con una capacit piena.

- 18 - - 19 - - 20 -

Panoramica di Prodotto 1. Pannello Solare 2. Rivelatore di PIR 3. Bottone di Potenza/Modalit 4. Pannello di LED

Installazione La distanza tra i 2 buchi di ganci di 12cm (4,72 pollici). Si prega di assicurare che le viti sono messe ai posti appropriati prima di avvitarle al muro.

Nota: La raccomandiamo di appendere la lampada solare sul posto dove non esiste niente riparo o vetro sopra. Lavorerebbe meglio quando la lampada solare guarda a sud o nord dove si pu ottenere pi esposizione solare e ore di ricarica.

+

12cm

Processo di Lavoro Si pu accendere o spegnere la lampada in un ciclo premendo il bottone di Potenza/Modalit. Quando la luminosit ambientale meno di 200lux, come quella allalba, per esempio, la lampada solare funzioner automaticamente quando sta nella modalit 1 o quella 2.

Modalit 1: movimento dinduzione + luce fioca Quando il movimento rilevato, si scambier automaticamente la luce fioca a quella intensa.

Modalit 2: movimento dinduzione Quando il movimento rilevato, si accender la lampada solare e emetter la luce intensa.

Modalit 3: Solo la luce intensa.

Condizione

Modalit 1

Modalit 2

Modalit 3

Si spegne

Operazione

Premere e tenere premuto il bottone di Potenza per circa 3

secondi al fine di accendere la lampada solare, ed adesso, sta gi

nella modalit 1.

Premere il bottone di Potenza per entrare

nella modalit 2.

Premere il bottone di Potenza per entrare

nella modalit 3.

Alla fine, premere il bottone di Potenza,

e si spegner la lampada.

Rilevatore di PIR

Non innescato

Innescato

Non innescato

Innescato

Niente

Niente

Luce

Rimane la luce fioca

Luce intensa

Spenta

Luce intensa

Rimane la luce intensa

Niente

Durata(quando rilevato il

movimento ultimo)

20 secondi

20 secondi

5 ore quando di capacit piena

Niente

Ricaricare Si prega di ricaricare il dispositivo a piena capacit prima del primo uso.

Si prega di ricaricare la lampada solare ogni 3 mesi quando il dispositivo raramente usato o non usato per evitare il danno alla batteria in un lungo tempo.

Quando lampeggia la lampada, si prega di notare che la potenza della batteria quasi esaurita, ed adesso, si prega di ricaricare la lampada al fine di usarla in un tempo pi lungo.

La durata della lampada solare dipende dallesposizione del sole anche dalle ore di ricarica sotto la luce solare. Quando lesposizione solare pi intensa e il tempo di ricarica pi lungo, la durata delluso della batteria sar anche pi lunga.

Nota: Si pu ricaricare la lampada anche nel tempo nuvoloso, ma il mal tempo indebolir la ricarica del pannello solare.

Attenzione Non riparare, smontare o modificare in qualsiasi circostanza.

Tenere il dispositivo lontano da fuoco per evitare lesplosione o la perdita.

Non immergere il dispositivo nellacqua.

Non raccomandato alcuno impatto severo al dispositivo.

Garanzia Aukey offre a tutti i nostri clienti una garanzia per 24 mesi dalla data del Suo acquisto originale. Se il dispositivo non si pu funzionare a causa dei difetti del produttore, si prega di comunicare con noi su support@aukey.com per lanciare una richiesta di garanzia. Offriremo le istruzioni a Lei su come restituire il prodotto per la riparazione o sostituzione.

Contattarci Per tutte le richieste, si prega di contattarci con il Suo numero di ordine al fine di risolvere pi velocemente il problema.

E-mail: support@aukey.com Sito: www.aukey.com

- 21 -

Aukey LT-SL1 support.jp@aukey.com

1 x 2 x 1 x 1 x 24

User Manual

Warranty Card

LED LED CCT CRI

LT-SL1 ABS + PC 4W SMD2835 36 Pcs 6V 2.5W 18% ( 3.7V/ 4000mAh) IP65 6000K 70-80Ra 500lm 5 - 10m 120 433g/ 0.95Ib 21011585mm/ 8.274.533.35in 50000 hours >6 Hours 1: 30. 2: 30. 3: 5

- 22 - - 23 - - 24 -

1. 2. PIR 3. / 4. LED

2 12 cm (4.72 in)

+

12cm

/ 3 20012

1DIM DIM

2 DIMON

3

1

2

3

O

3 1

2

3

O

PIR

DIM

O

20 secs

20 secs

3

Aukey24 support.jp@aukey.com

Aukey

support.jp@aukey.com

www.aukey.com

- 05 -

Einfhrung Herzlichen Glckwunsch zum Kauf Ihrer Aukey LT-SL1 Solarenergie-Wandlampe. Bitte lesen Sie diese Bedienungsanleitung vor der ersten Inbetriebnahme sorgfltig durch - so erzielen Sie optimalen Gebrauch und Sicherheit. Sollten Sie Schwierigkeiten haben, die Anweisungen dieser Bedinungsan-leitung zu befolgen, kontaktieren Sie unser Supportteam per E-Mail unter support@aukey.com.

Lieferumfang 1 x Aukey Solarenergie-Wandlampe 2 x Schrauben 1 x Bedienungsanleitung 1 x 24 Monate Garrantiekarte

User Manual

Warranty Card

Spezifikationen Model Material Leistungsverbrauch LED Model LED Menge Solar Panel Batterie Typ Wasserdicht-Rating CCT CRI Lichtfluss Induktion-Entfernung: Induktion-Winkel Nettogewicht Abmessung Lebensdauer ladezeit

Arbeitsstunden

LT-SL1 ABS + PC 4W SMD2835 36 Stcke 6V 2.5W 18% Leistungsfhigkeit Li-ion Wiederaufladbare Batterie( 3.7V/ 4000mAh) IP65 6000K 70-80Ra 500lm 5 - 10m 120 433g/ 0.95Ib 21011585mm/ 8.274.533.35in 50000 Stunden >6 Stunden Modus 1: hngt davon ab, wie lange das helle Licht an bleibt, in der Regel kann mehr als 30 Stunden sein Modus 2:hngt davon ab, wie lange das helle Licht an bleibt, in der Regel kann mehr als 30 Stunden sein Modus 3:5 Stunden bei vollem Aufladen

- 06 - - 07 - - 08 -

berblick ber das Produkt 1. Solarpanel 2. PIR-Detektor 3. Strom/ Modus Knopf 4. LED-Panel

Einbau Der Abstand zwischen den beiden Hngeloch ist 12cm (4.72in). Bitte achten Sie darauf, dass die Schrauben an der entsprechenden Stelle sind, bevor Sie sie an die Wand schrauben.

Beachtung: Wir empfehlen Ihnen dringend, die Sonnenstrahlen an der Stelle zu hngen, wo es keinen Schutz oder Glas auf dem Oberteil gibt. Und kann es besser funktionieren, wenn die Sonneneinstrahlung nach Sden oder Norden richten, wo es mehr Sonneneinstrahlung und Ladezeiten erhalten kann.

+

12cm

Arbeitsvorgang Durch das Drcken auf den Strom/ Modusknopf ist es Ein-und Ausschalten von drei Modi. Wenn das Umgebungslicht unter 200 Lux ist, zum Beispiel, Abenddmmerung bis zum Morgengrauen,funktioniert die Sonneneinstrahlung automatisch, wenn sie auf Modus 1 oder 2 gesetzt ist.

Modus 1: Bewegungsinduktion + schwaches Licht Wenn eine Bewegung erkannt wird, wird das schwache Licht auf helles Licht wechseln.

Modus 2: Bewegungsinduktion Wenn eine Bewegung erkannt wird, wird das Solarlicht eingeschaltet sein, und es ist helles Licht.

Modus 3: Nur helles Licht

Zustand

Modus 1

Modus 2

Modus 3

Aus

Bedienung

Drcken und halten Sie den Netzschalter fr 3 Sekunden, um

das Solarlicht einzuschalten, und es

ist jetzts schon Modus 1.

Drcken Sie den Netzschalter, um in

den Modus 2 zu gehen

Drcken Sie den Netzschalter, um in

den Modus 3 zu gehen

Drcken Sie den Netzschalter zuletzt,

dann wird sie sich aus

PIR-Detektor

Nicht ausgelst

Ausgelst

Nicht ausgelst

Ausgelst

Null

Null

Beleuchtung

Bleiben auf schwaches Licht

Helles Licht

Aus

Helles Licht

Bleiben auf helles Licht

Null

Dauer( wenn die letzte Bewegung

erkennt war)

20 Sekunden

20 Sekunden

5 Stunden bei vollem Aufladen

Null

Aufladen Vor dem ersten Gebrauch laden Sie bitte das Gert vollstndig auf.

Bitte laden Sie den Solar-Licht alle 3 Monate auf, wenn das Gert sehr selten verwendet ist, fr den Fall, dass die Batterie whrend langer Zeit beschdigt werden sollte.

Wenn die Solarleuchte blinkt, bedeutet dies, dass der Batteriezustand niederig ist. Bitte laden Sie sie fr die weitere Verwendung auf.

Die Zeitdauer der Sonneneinstrahlung ist stark abhngig von der Sonneneinstrahlung und Ladezeiten unter dem Sonnenlicht. Je strkere die Sonneneinstrahlung und lngere Ladezeit ist, desto schneller und lngerer ist die Laufzeit der Batterie .

Hinweis: Die Sonneneinstrahlung kann auch bei bewlkten Tagen das Gert aufladen, aber schlechtem Wetter kann das Aufladen des Solarpanels schwchen.

Achtung Bitte reparieren, zerlegen oder modifizieren Sie das Gert unter keinen Umstnden.

Halten Sie das Gert von Feuer, um Explosion oder Auslaufen zu verhindern.

Tauchen Sie Das Gert nicht ins Wasser .

Irgendeiner schwere Schock an dem Gert wird nicht empfohlen.

Garantie Aukey bieten fr alle Kunden eine 24 Monate Garantie von dem Tag des orginalen Kaufes an. Wenn die Lampe aufgrund von Defekten nicht mehr funktioniert, kontaktieren Sie bitte den Aukey Support ber folgend E-mail: support@aukey.com. Geben Sie dabei bitte auch Ihre Bestellnummer an.

Wir bieten Ihnen nur die Nachverkaufsuntersttzung fr die Produkte aus Aukey oder von Aukey autorisierten Distributoren. Wenn Sie das Produkt von einem anderen als Au

Manualsnet FAQs

If you want to find out how the LT-SL1 Aukey works, you can view and download the Aukey LT-SL1 Light User Manual on the Manualsnet website.

Yes, we have the User Manual for Aukey LT-SL1 as well as other Aukey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Aukey LT-SL1. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Aukey LT-SL1 Light User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Aukey LT-SL1 Light User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Aukey LT-SL1 Light User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Aukey LT-SL1 Light User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Aukey LT-SL1 Light User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.