ASUS DSL-N13 Router User Manual PDF

1 of 54
1 of 54

Summary of Content for ASUS DSL-N13 Router User Manual PDF

UserManual

E3738/April2008

DSL-N13WirelessADSL2/2+ ModemRouter

ManufacturerContactInformation ASUSTeK COMPUTER INC. (Asia-Pacific)

Company address: 15 Li-Te Road, Beitou, Taipei 11259 General (tel): +886-2-2894-3447 Web site address: www.asus.com.tw General (fax): +886-2-2894-7798 General email: info@asus.com.tw

ASUS COMPUTER INTERNATIONAL (America)

Company address: 44370 Nobel Drive, Fremont, CA 94538, USA General (fax): +1-510-608-4555 Web site address: usa.asus.com

Technicalsupport

General support: +1-502-995-0883 Support (fax): +1-502-933-8713 Online support: http://vip.asus.com/eservice/techserv.aspx

ASUS COMPUTER GmbH (Germany & Austria)

Company address: Harkort Str. 25, D-40880 Ratingen, Germany General (tel): +49-2102-95990 Web site address: www.asuscom.de General (fax): +49-2102-959911 Online contact: www.asuscom.de/sales

Technicalsupport

Components: +49-2102-95990 Online support: www.asuscom.de/support Notebook: +49-2102-959910 Support (fax): +49-2102-959911

DSL-N13WirelessADSL2/2+ModemRouterUserManual

1

Tableofcontents Packagecontents...........................................................................3

Hardwareoverview.........................................................................4 Front panel ....................................................................................... 4

Rear panel ....................................................................................... 5

Product features ............................................................................... 5

Hardware connections ..................................................................... 6

ConnectingtotheInternet.............................................................7 Before start ...................................................................................... 7

Preparing your WAN ........................................................................ 7

Preparing your LAN ......................................................................... 7

Login the Web configuration interface ............................................. 8

Quick setup ...................................................................................... 9

Manual Setup ................................................................................. 11

EZSetup ......................................................................................... 15

Connecting DSL-N13 with ASUS WLAN Card ............................... 19

Wirelesssettings..........................................................................21 Setting up SSID ............................................................................. 21

Setting up wireless security ........................................................... 21

MAC filter ....................................................................................... 26

Wireless bridge .............................................................................. 26

Wireless advanced settings ........................................................... 30

Networksecurity...........................................................................31 Setting up access right to DSL-N13 ............................................... 31

Setting up port triggering ................................................................ 32

Setting up virtual server ................................................................. 33

Setting up DMZ host ...................................................................... 34

DSL-N13WirelessADSL2/2+ModemRouterUserManual

2

Allowing SIP request through NAT ................................................. 34

Firewall - Outgoing IP filter ............................................................. 34

Firewall- Incoming IP filter .............................................................. 35

Access time restriction ................................................................... 36

Advancedsettings........................................................................37 WAN ............................................................................................... 37

LAN ............................................................................................... 37

Setting up DNS server ................................................................... 38

Setting up dynamic DNS ............................................................... 38

Setting up default gateway ............................................................. 41

Setting up static route .................................................................... 41

Setting up routing protocol - RIP .................................................... 42

ASUS AiDisk Setup ........................................................................ 43

USBapplications..........................................................................46 FTP server function ........................................................................ 46

Sharing USB printer ....................................................................... 48

Management..................................................................................51 Configuration backup ..................................................................... 51

Restore settings from a backup file ................................................ 51

Reset to factory default .................................................................. 51

Setting up time server .................................................................... 52

Firmware update ............................................................................ 52

DSL-N13WirelessADSL2/2+ModemRouterUserManual

3

DSL-N13 Wireless ADSL2/2+ Modem Router AC power adapter (type varies by region) Categroy 5 (Cat. 5) Ethernet cable Telephone cable Splitter (type varies by region) Support CD (with electronic user manual included) Quick Start Guide

Packagecontents

DSL-N13WirelessADSL2/2+ModemRouterUserManual

4

Hardwareoverview Frontpanel The DSL-N13 Wireless ADSL2/2+ Modem Router front panel contains LED indicators which shows the status of DSL-N13.

Label Activity Description PWR (Power)

ON Power ON OFF No power Blink Restoring to factory default

ADSL ON (Green) ADSL link up Blink (Green) ADSL training ON (Red) ADSL link down OFF ADSL is down

IP ON (Green) ADSL is up and the link is PPP ON (Red) ADSL is up, but the link is not PPP OFF ADSL is down

USB 2.0 ON USB device detected OFF No USB device detected

AIR ON Wireless LAN ready Blink Transmiting or receiving data through wireless OFF No power or wireless LAN not ready

LAN 1-4 ON Physically connected to an Ethernet device Blink Transmitting or receiving data through Ethernet cable OFF No power or no physical connection

PWR ADSL IP USBAIR LAN

DSL-N13WirelessADSL2/2+ModemRouterUserManual

5

Rearpanel

Viewed from left to right, the rear panel of DSL-N13 contains the following elements:

ADSL port Power connector Power switch Four Local Area Network (LAN) ports USB 2.0 ports EZSetup button Reset button SMA antenna connector

Productfeatures The DSL-N13 Wireless ADSL 2/ 2+ Modem Router provides the following features:

Built-in ADSL modem Built-in firewall IEEE802.11n standard-based wireless network, backward compatible with

802.11b/g devices Easy-to-use Web-based configuration interface: Quick Setup for ADSL connection,

wireless, and security configuration EZSetup utility for ADSL connection, wireless network and security quick setup

PWRADSL

EZSetup

USB 2.0

Reset

LAN

Antenna

DSL-N13WirelessADSL2/2+ModemRouterUserManual

6

Hardwareconnections

ADSLconnection Use the ADSL splitter supplied in the package to split ADSL signal and telephone service. Connect your ASUS DSL-N13 Wireless ADSL2/2+ Modem Router to the DSL port of the splitter with the telephone cable supplied in the package. Use another telephone cable to connect your telephone to the Phone port of the ADSL splitter.

Ethernetconnection Use Category 5 (CAT5) Ethernet cable to build up your wired LAN connections. The ASUS DSL-N13 Wireless ADSL2/ 2+ Modem Router is a Fast Ethernet device that provides 100Mbps network connection. To ensure the connection quality, use CAT5 Ethernet cable to connect your network devices, such as desktop computers and network printers.

Wall power outlet ASUS Wireless Router

Wall telephone outlet Splitter

Phone

DSL Power

Line

LAN

DSL Phone

Line

Wirelessconnection To access Internet via wireless connection, you need to install an IEEE802.11b/g wireless adapter on your computer, such as ASUS WL-167g, WL-100gE, WL-100gD, WL-169gE, WL-106gM, WL-160N, and USB-N11.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

7

Beforestart Before start, you need to:

make sure the cable connections are correct and DSL-N13 is powered ON; acquire an active Internet service, such as an ADSL account.

We recommend using wired connection for initial configuration, which may help avoid possible setup problems due to wireless instability. Use a CAT5 cable to connect an Ethernet-enabled computer to a LAN port of DSL-N13.

PreparingyourWAN Depending on your ISP's requirements, you may need to acquire some of the information listed below for setting up Internet connection on DSL-N13.

Vitual Path Identifier (VPI) Virtual Channel Identifier (VCI) Host name Domain name ISP login user name and password ISP Domain Name System (DNS) server address Static IP address

PreparingyourLAN To use the DSL-N13 Wireless ADSL2/2+ Modem Router on your network, you need to install a network interface card (NIC) or an IEEE802.11b/g wireless network card to your computer.

LAN configuration requirement For initial configuration, we recommend you to connect a computer to one of the LAN port of DSL-N13 and configure the TCP/IP settings of your computer. The default IP settings of DSL-N13 are:

IPaddress:192.168.1.1 Subnetmask: 255.255.255.0 DHCPserver:enabled

To access DSL-N13, you must set your computer in the same subnet with the ADSL router. You can make the computer accept a dynamic IP address assigned by the DHCP server of DSL-N13, or manually set up IP address for your computer.

ConnectingtotheInternet

DSL-N13WirelessADSL2/2+ModemRouterUserManual

8

GettingdynamicIPaddress Open ControlPanel -> LocalAreaNetworkConnection, double-click Local Connection icon, then double-click Internet Protocol (TCP/IP). Select ObtainanIP addressautomatically and ObtainDNSserveraddressautomatically, then click OK.

AssigningIPaddressmanually Open ControlPanel -> LocalAreaNetwork Connection, double-click LocalConnection icon, then double-click InternetProtocol (TCP/ IP). Follow the descriptions below to setup the TCP/IP on your computer.

IP address: 192.168.1.xxx (xxx can be any number between 2 and 254, make sure the IP address is not used by other device)

Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 DNS: 192.168.1.1

Login the Web configuration interface To change the ADSL and wireless settings, you need to login to the Web configuration interface.

2. A login window appears. The default username is admin, password is admin(in lower case).

1. Type 192.168.1.1 (default IP address of DSL-N13) into the address box of the Web browser and press Enter.

3. When logged in, you can see the home page of DSL-N13 Web configuration interface. To setup the router, refer to Quick Setup in the next section. To setup the advanced functions, refer to the following chapters for detailed information.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

Quicksetup

Log onto the DSL-N13 configuration page 1. Type 12.168.1.1 into the address box of your Web browser and press Enter. 2. A login window appears for user name and password. The default username is

admin, password is admin (in lower case). 3. After logging in, you can see the DSL-N13 configuration page.

ADSLsetup 1. By default, the QuickSetup page pops up. The Quick Setup Wizard automatically

detects your ADSL connection type.

2. If ADSL connection is detected, the next page shows your ISP connection type.

If your ADSL connection is not detected, click ManualSetting to manually set up DSL-N13. Refer to Page 11-13 for manual setting instruction.

--IfyourconnectiontypeisPPPoEorPPPoA

For dynamicIP users, input your user name and password then click Next. For staticIP users, check UseStaticIPAddress, input your IP address, then click Next. Click Next to save the ADSL information to DSL-N13.

If your actual connection is not PPPoE or PPPoA, click ManualSetting to manually set up DSL-N13. Refer to Page 11-13 for manual setting instruction.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

10

-- If your connection type is MER (DHCP)

Click Next if your connection type is MER (DHCP).

If your actual connection is not MER(DHCP), click ManualSetting to manually set up DSL-N13. Refer to Page 11-13 for manual setting instruction.

Wirelesssetup 1. Choose a SecurityLevel. For detailed security information, refer to Page 21-22.

2. Input a key in the Key field. The number of digit for the key depends on the security level you choose.

3. The summary page then shows up. If the information displayed is correct, click Save/Reboot to finish the setup. Otherwise, click Back to modify the settings.

4. Setup complete! Wait for about 60 seconds to reboot. The Web page will refresh to show device information after reboot.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

11

ManualSetup If you encounter difficulty when configuring your ADSL connection with Quick Setup, click ManualSettingto manually set up your DSL-N13.

ADSLSetup 1. Select your Country and ISP and click Next.

2. If your country and ISP are not on the list, selectNotlist, key in your VPI and VCI values and click Next. You may ask your ISP for VPI/VCI values.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

12

3. Select your connection type and click Next. You can get the connection type from your ISP.

--IfyourconnectiontypeisPPPoAorPPPoE

For dynamicIP users, input your PPP user name, password, and service name then click Next. For staticIP users, check UseStaticIPAddress then key in your IP address, then click Next.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

13

--IfyourconnectiontypeisMER

For dynamic IP users, check Obtain an IP address automatically, Obtain defaultgatewayautomatically, and ObtainDNSserveraddressautomatically, then click Next. For staticIP users, check UsethefollowingIPAddress, Usethefollowing defaultgateway, and UsethefollowingDNSserveraddress, then input the addresses in correspondent fields.

--IfyourconnectiontypeisIPoA

StaticIPuseronly. Input the WAN IP address assigned by your ISP, then click Next.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

14

WirelessSetup 1. Designate an SSID (network name) for DSL-N13. Choose the security level then

input a key. The number of digit of your key depends on the security level you choose. Refer to the note on the web page. When finished, click Next.

2. This page provides a summary of DSL-N13 WAN and wirelss configuration. Click Save/Rebootto save and activate your configuration.

3. Setup complete! DSL-N13 reboots in about 50 seconds. The green bar shows the current rebooting status. After reboot, the web page will automatically refresh to display the settings.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

15

EZSetup ASUS DSL-N13 Wireless ADSL2/2+ Modem Router provides an easy-to-use setup utility -- EZSetup. With this utility, you can setup your Internet connection, wireless LAN with just several clicks.

InstallingASUSutility To use ASUS EZSetup for DSL-N13 configuration, you must install the ASUS utilities from the support CD included in your package. Insert the CD into your optical drive and autorun the installation program. If autorun is disabled on your computer, double-click SETUP.EXE in the root directory of the CD.

SetupDSL-N13usingEZSetup 1. Before using this utility, make sure that your hardware connections are all set. Click

Start ->Program->ASUSUtility ->DSL-N13WirelessRouter ->EZSetup Wizardto start EZSetup. Click Next.

2. Click EZSetup.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

16

EZSetup

3. Push the red EZSetup button on the rear panel of DSL-N13 for over 3 seconds until the PWR LED is blinking.

5. The system generates the SSID and Network key automatically. The network key is a 128-bit WEP key by default. You can accept the settings, or assign SSID and keys to your own need. Click Next to save the wireless settings.

4. Click EZSetup button.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

17

6. Next, EZSetup will guide you to complete the Internet connection settings. Check Configure ISP settings then click Next to continue.

7. The system detects your Internet connection type. The progress may take several seconds.

If your ADSL connection is successfully detected by DSL-N13, skip to Step 8. If your ADSL connection can not be detected, you need follow Step 8 and manually set up your ADSL connection.

8. Select your country and ISP then click Next.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

18

If your country or ISP are not on the list, select Notlisted for both country and ISP fields. Then select Connectiontype and fill in VPI and VCI. You can get VPI/VCI values from your ISP.

9. Input your ISP account User name and Password then click Next.

10. Setup complete! This page shows the wireless network setting parameters. You can either save it or print it out for future reference. Click Finish to quit EZSetup.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

1

ConnectingDSL-N13withASUSWLANCard

Configuring ASUS WLAN Card with One Touch Wizard If you have installed ASUS wireless card together with its utilities and drives on your PC, click Start->Programes->ASUSUtility->WLANCard->OneTouchWizard to launch the One Touch Wizard utility.

3. Set the authentication and encryption of your WLAN card the same with those at DSL-N13. Click Next to continue.

1. Select Connecttoanexistingwireless LAN (Station) radio button and click Nexttocontinue.

2. One Touch Wizard searches and displays the available APs in the Available Networks list. Select DSL-N13 and press Next to continue.

4. It takes several seconds for the wireless card to associate with DSL-N13. Press Next to setup TCP/IP.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

20

2. Input the key you have set on the DSL-N13 and click Connect. The connection is complete within several seconds.

1. Double-click the wireless network icon on the task bar to view available networks. Select your wireless router and click Connect.

5. Setup the IP address of the WLAN Card according to your network condition. After the setup is complete, click Finish to exit theOneTouchWizard.

Configuring WLAN card with WindowsWZCservice You can also use Windows Wireless Zero Configuration service to set up the wireless connection with DSL-N13.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

21

Wirelesssettings This chaper describes how to configure other wireless features of your ASUS DSL-N13 ADSL Wireless Router.

SettingupSSID SSID stands for Service Set Identifier, also known as the name of a wireless network. To connect a wireless router, or to form a wireless bridge system, all wireless routers or APs or clients must have the same SSID.To setup SSID: 1. Click Wireless->Basic in the left side menu to open the configuration page.

2. Select EnableWireless checkbox. 3. You can hide DSL-N13 from wireless scanning by selecting HideAccessPoint,

but wireless clients still can connect to DSL-N13 by specifying correct SSID. 4. Define the SSID for DSL-N13. The default SSID is Default. 5. Press Save/Apply to save and activate the settings.

Settingupwirelesssecurity To protect your wireless network, you need to setup a security mechanism at both DSL-N13 and the wireless clients.

Networkauthentication Network authentication uses certain types of mechanism to identify authenticated wireless clients. DSL-N13 supports the following authentication methods:

Open: This option disables authentication protection for your wireless network. Under the Open mode, any IEEE802.11b/g wireless client can connect to your wireless network.

Shared: Shared means using the same WEP keys for authentication and encryption. 802.1X: 802.1X uses RADIUS (Remote Access Dial-Up User Service) server

to authenticate wireless clients with a user name and password. It can authenticate user with different levels of access right.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

22

WPA: WPA stands for WiFi-Protected Access. WPA provides two security modes for Home/SOHO user and enterprise network. The former solution adopts Pre-Shared Key for authentication, and the later uses the existing 802.1X RADIUS server in the enterprise network to process the authentication requests.

WPA-PSK: WPA-PSK (Pre-Shared Key) is the solution for home and SOHO users who have no 802.11X authentication server within the LAN. To setup WPA-PSK, you need to input a passphrase and let the system generate the key. Combination of letters, numbers and non-alphnumeric charecters is recommended for ensuring security.

Encryption Encryption is used to convert plain text data into unreadable codes with certain type of algorithm before capsulation for wireless transmission. DSL-N13 supports the following encryption methods:

WEP: WEP stands for Wired Equivalent Privacy. It uses 64 or 128-bit static keys. You can let the system generate the WEP keys by inputting a Passphrase.

TKIP: Temporal Key Integrity Protocol (TKIP) dynamically generates unique keys to encypt every data packet in a wireless session.

AES: Advanced Encryption Standard (AES) is a dependable encryption adopted in WPA2 or IEEE802.11i standard. It offers stronger protection and greatly increases the complexity of wireless encryption.

TKIP+AES: For a network where WPA clients (using TKIP encryption) and WPA2 clients (using AES encryption) co-exit. Select this option to enable both.

Howtosetupwirelesssecurity

Open 1. Click Wireless->Security in the left side menu to open the configuration page. 2. Select Open in the NetworkAuthentication field to disable authentication mechanism.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

23

3. Select Enable in the WEPEncryption field to use WEP keys for data encryptions. Select 64-bit or 128-bit EncryptionStrength for key length then click Set EncryptioinKeys button to setup the keys. If you do not want to encrypt data, select Disable in WEPEncryption and skip to Step 5.

4. After you click the SetEncryptioinKeys button, you are directed to another page to setup the keys. You can select EnableASUSPassphrassand input a passphrase in the first box below, the system automatically generates four netwrok keys for you. You can also disable ASUS Passphrass and input four keys manually. Record the passphrase (if any) and keys in your note.

5. Press Save/Apply to save and activate the settings.

Shared 1. Click Wireless->Security in the left side menu to open the configuration page. 2. Select Shared in the NetworkAuthentication field to use WEP authentication.

3. The WEP Encryption is fixed to Enabled because Shared mode use the same WEP keys for both encryption and authentication.

4. Select 64-bit or 128-bit EncryptionStrength for key length then click Set EncryptionKeys button to setup the keys. Refer to Open mode Step 4 for key configuration.

5. Press Save/Apply to save and activate the settings.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

24

802.1X 1. Click Wireless->Security in the left side menu to open the configuration page. 2. Select 802.1X in the NetworkAuthentication field to enable authentication using

RADIUS server in your network.

3. Input the RADIUSServerIPaddress, RADIUSport (the default value is 1812), and RADIUSKey.

4. You can choose to enable or disable data encryption. If you want to encrypt data, select Enable in the WEP Encryption field, select 64-bit or 128-bit Encryption Strength for key length. Click SetEncryptioinKeys button to setup the keys.

5. Refer to Open mode Step 4 for key configuration. 6. Press Save/Apply to save and activate the settings.

WPA 1. Click Wireless->Security in the left side menu to open the configuration page. 2. Select WPA in the NetworkAuthentication field to enable RADIUS server

authentication and advanced encryption methods.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

25

3. Set the WPA2Preauthentication to Enabled if you want to use this function. 4. The NetworkRe-auth Interval is 36000 seconds by default, you can setup this

value according to your network environment. 5. Set up RADIUS server inforamtion by inputting WPA Group Rekey Interval,

RADIUS server IP address, RADIUS port and RADIUS Key. 6. Set up WPA encryption methods. If there are only WPA2 clients within your network,

select AES, if WPA clients only, select TKIP; if both exist, select TKIP+AES. 7. You can also enable WEP client to access your wireless network. To enable WEP

clients, set WEPEncryption to Enabled. Select 64-bit or 128-bit Encryption Strength for key length then click SetEncryptioinKeys button to setup the keys. Refer to Open mode Step 4 for key configuration.

8. Press Save/Apply to save and activate the settings.

WPA-PSK 1. Click Wireless->Security in the left side menu to open the configuration page. 2. Select WPA-PSK in the NetworkAuthentication field.

3. Input the WPA Pre-Shared Key. The key is masked by system. To check the key, press Save/Apply and wait until the page refreshes. Then click Clickhere to display link, you can see the key displayed in a seperate window.

4. Setup the WPA Group Rekey Interval. 5. Set up WPA encryption methods. If there are only WPA2 clients within your network,

select AES, if WPA clients only, select TKIP; if both exist, select TKIP+AES. 6. You can also enable WEP client to access your wireless network. To enable WEP

clients, set WEPEncryption to Enabled. Select 64-bit or 128-bit Encryption Strength for key length then click SetEncryptionKeys button to setup the keys. Refer to Open mode Step 4 for key configuration.

7. Press Save/Apply to save and activate the settings.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

26

MAC filter You can setup MAC filters to allow or deny wireless clients with known MAC addresses. To setup MAC filter: 1. Click Wireless->MACFilter in the left side menu to open the configuration page. 2. Select the restriction mode for the filter: select Allow to allow the client and deny

the rest; select Deny to deny the client and allow the rest. By default, the filter is set to Disable which allows all clients. Click Add to create a filter.

2. Type the MAC address of the wireless client you want to allow or block. 3. Press Save/Apply to save and activate the settings.

Wirelessbridge You can connect DSL-N13 to other wireless bridges so as to expand your wireless LAN. This function is also refer to as Wireless Distribution System (WDS). To setup WDS, the wireless routers must meet the following requirements: 1. Using the same encryption. 2. Working on the same channel. 3. The IP addresses of all wireless bridges are within the same subnet. 4. WDS enabled. 5. For bridging wireless routers, the MAC Addresses of the uplink wireless router must

be saved to the RemoteBridgeList. For uplink wireless router, MAC addresses of all bridging router must be saved.

Example: DSL-N13 (wireless bridge with Internet access), WL-500gP (wireless bridge), and WL-500gD (wireless bridge). Refer to the illustration on the next page.

DSL-N13 WL-500gD WL-500gP SSID ASUS ASUS ASUS DHCP server Enabled Disabled Disabled LAN IP address 192.168.1.1 192.168.1.2 192.168.1.3 Authentication Open Open Open Encryption WEP-128bit WEP-128bit WEP-128bit Remote bridge 00:01:00:01:01:02

00:01:00:01:01:03 00:01:00:01:01:01 00:01:00:01:01:01

MAC address 00:01:00:01:01:01 00:01:00:01:01:02 00:01:00:01:01:03 Channel 11 11 11

DSL-N13WirelessADSL2/2+ModemRouterUserManual

27

WDS setup (DSL-N13) 1. Setting up encryption If you want to use encryption function, select a NetworkAuthentication mode; if not, select Disabled. Click Wireless->Security to open the configuration page. In this example, set authentication to Open and encryption to Enabled, select 128bit for Encryption Strength, then click SetEncryptionKeys.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

28

2. Setting up channel Click Wireless->Advanced. Set Channelto 11 and click Save/Apply.

You can check EnableASUSPassPhrase and input a string in Passphrase field to let the system generate the Network Keys. You can also disable Passphrase and input four keys manually. When finished, clickSave/Apply.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

2

3. Setting IP address Click AdvancedSetup ->LAN. Set DSL-N13 IPaddress to 12.168.1.1, select EnableDHCPServer and set StartIPaddress to 12.168.1.4. Click Save/Reboot.

4. Setting WDS Click Wireless ->WirelessBridge. Select WirelessBridge.You can select Enabled(Scan) to find WL-500gD and WL-500gP. If the stations are on the list, check the checkbox and click Save/Apply.

If you cannot find WL-500gD by scanning, set BridgeRestrict to Enable and input the MAC address of WL-500gD and WL-500gP manually. When finished, click Save/Apply. DSL-N13 WDS setup is complete!

DSL-N13WirelessADSL2/2+ModemRouterUserManual

30

Wirelessadvancedsettings Click Wireless->Advanced to configure advanced features of the wireless router such as communication channel, data rate and WMM.

If you do not know the meaning of these items, use the default setting.

WDS setup (WL-500gD and WL-500gP) Set up WL-500gD and WL-500gP according to the table on Page 26. 1. Wireless Setting

Set WL-500gD, WL-500gP wireless channel, authentication, encryption and keys the same as DSL-N13.

2. Set IP address to 192.168.1.2 (WL-500gD), 192.168.1.3 (WL-500gP) 3. Disable DHCP Server and set default gateway to 192.168.1.1, 4. WDS Setting

Open Wireless->Bridge, set AP Mode to Hybrid. Set Channelto 11. Add the MAC address of DSL-N13 to RemoteBridgeList.

5. Save the settings and reboot.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

31

Networksecurity This chapter shows how to set up security defence for your local area network.

SettingupaccessrighttoDSL-N13 To protect your wired and wireless LAN, we recommend setting up access protection so as to prevent DSL-N13 from being viewed or modified by unauthenticated users.

Servicerestriction DSL-N13 provides a Service Control List (SCL) that can enable or disable services which are used to access the router configuration interface. You can choose allowing HTTP, ICMP from WAN, or allowing HTTP from LAN. After configuration is complete, click Save/Apply to activate the settings.

IPaddressrestriction To protect the router from being accessed by unauthenticated user in your LAN, you can restrict the access right to the hosts with certain IP addresses. Click Management-> AccessControl->IPAddressesto setup the IP address for the authenticated network supervisors.

Before setting up the IP address restriction, make sure addresses of authenticated hosts are static.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

32

Passwordprotection DSL-N13 ADSL also provides three levels of access right: admin, support, and user. Account "admin" has full access to change and view configuration of the router, "support" is for ISP technician to view and keep maintenance to the router, "user" can view the router settings and statistics, as well as to update the software. 1. Click Management ->AccessControl ->Passwords in the left side menu to

setup passwords for these accounts.

2. Select the account username and fill in old password, and new password (twice). Each passwords contains up to 16 characters or digits.

3. Press Save/Applyto save and activate the settings.

Settingupporttriggering Some applications such as games, video conferencing, and remote access require specified ports in the firewall to be opened for remote access. You can configure the port settings by selecting an existing application or creating your custom applications.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

33

1. Click AdvancedSetup->NAT->PortTriggering in the left side menu to open the configuration page. Click Add to create a new rule.

2. Select the service you want to configure and let the system automatically fill in the external and internal port number and protocol type. You can also select Custom Server radio button to designate a certain known server.

3. Fill in trigger port (range) and protocol, open port (range) and protocol for the service if you select CustomServer radio button.

4. Press Save/Apply to save and activate the settings.

Settingupvirtualserver Vitual server allows directing WAN incoming traffic to hosts or servers using private IP addresses within a LAN. With virtual server, the router checks the port number of the packets sent to the WAN interface, translates the port numbers into private IP address, and redirects the packets to the corresponding internal hosts and servers. DSL-N13 supports up to 32 virtual server entries. To set up virtual server: 1. Click AdvancedSetup->NAT->VirtualServer in the left side menu to open the

configuration page. Click Add to create a new rule. 2. Select the service you want to configure and let the system automatically fill in the

external and internal port number and protocol type. You can also select Custom Server radio button to designate a certain known server.

3. Fill in external port (range), internal port (range), and protocol for the service if you select CustomServer radio button.

4. Fill the ServerIPAddress box with the network address of the host or server within your LAN.

5. Press Save/Apply to save and activate the settings.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

34

SettingupDMZhost The function of DMZ is similar to that of virtual server. The difference between vitual server and DMZ is that DMZ opens all ports to WAN while virtual server opens ports according to the demand of the enabled services. To configure DMZ host: 1. Click AdvancedSetup->NAT->DMZHost in the left side menu to open the

configuration page. 2. Enter the IP address of the host to be setup as DMZ host. 3. Press Save/Apply to activate the settings.

Allowing SIP request through NAT NAT checks IP header only and translate the information into private IP address. However, for applications that demand many dynamic ports for session control such as Session Initiation Protocol (SIP), traditional NAT cannot translate the address because lack of preset service ports. To enable such services while at the same time do not sacrifice network security, DSL-N13 introduces Application Layer Gateway (ALG) to allow SIP request going through fireware and NAT from WAN. To configure ALG: 1. Click AdvancedSetup ->NAT->ALG in the left side menu to open the

configuration page.

2. Select SIPEnabled checkbox to allow SIP request, or uncheck to disable. 3. Press Save/Apply to save and activate the settings.

Firewall - Outgoing IP filter By default, all outbound IP traffic is allowed. You can block certain types of IP traffic by setting up filter rules at DSL-N13. 1. Click AdvancedSetup ->Security -> IPFiltering ->Outgoing in the left side

menu to open the configuration page. Click Add to create a new rule.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

35

2. Define a FilterName for the filter rule. Specify protocol, source IP address, subnet mask and port (range) and destination IP address, subnet mask and port (range).

3. Press Save/Apply to save and activate the settings.

Firewall- Incoming IP filter By default, all incoming IP traffic is blocked. You can allow certain types of IP traffic by setting up filter rules at DSL-N13. 1. Click AdvancedSetup ->Security -> IPFiltering -> Incoming in the left side

menu to open the configuration page. Click Add to create a new rule.

2. Define a FilterName for the filter rule. Specify protocol, source IP address, subnet mask and port (range) and destinationi IP address, submask and port (range).

3. Select the WAN interface through which the packets enter the firewall. 4. Press Save/Apply to save and activate the settings.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

36

Accesstimerestriction This function enables to put time restriction on Internet access by setting up blocking time table. To configure the access time restriction: 1. Click AdvancedSetup->Security->ParentalControl in the left side menu to

open the configuration page. Click Add to create a new rule.

2. Fill in the User name to whom you want to apply the restriction. 3. Fill in the MAC address of the restricted host. If you are accessing this configuration

at the computer of restricted host, select Browser's MAC Address radio button. The system automatically detects the MAC address of the configuration console. If you want to configure hosts other than the console computer, enter the MAC address manually.

To get the MAC address of a host, click Startmenu on the desktop of the host, select Run..., type cmd into the box and press OK, then type command ipconfig /all and press enter. You can find the MAC address displayed as PhysicalAddress.

4. Select the days of a week to which the rule shall apply. 5. Fill time into the StartBlockingTime and EndBlockingTime box to set up block

time. 6. Press Save/Apply to save and activate the settings.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

37

This chapter shows how to configure other advanced router features of DSL-N13.

WAN Click Advanced Setup -> WAN in the left side menu to enter the WAN setup page. This page allows you to edit the WAN settings.

LAN 1. Click AdvancedSetup->LAN in the left side menu to enter the LocalAreaNetwork

(LAN) Setup page. This page allows to change the IP address and subnet mask of the router, enables or disables UPnP, IGMP snooping and DHCP server.

The default settings are: IP Address: 192.168.1.1 Subnet mask: 255.255.255.0 Enable UPnP: Yes Enable IGMP Snooping: No Enable DHCP Server: Yes Start IP Address: 192.168.1.2 End IP Address: 192.168.1.254 Lease Time (hour): 24

DHCP server is enabled by default. You can define which addresses to be assigned to the LAN computers by DHCP server. 2. Press Save to save the configurations and go on setting up other features. If all

settings are complete, press Save/Reboot to apply the settings and reboot DSL-N13.

Advancedsettings

DSL-N13WirelessADSL2/2+ModemRouterUserManual

38

SettingupDNSserver Domain Name System (DNS) server is used to translate IP addresses into easy-to- remember domain names, such as www.asus.com, and vice versa. Click AdvancedSetup->DNS->DNSServer to open the DNS server configuration page. By default, the DNS server is set to automatically accept the DNS server assigned by ISP. If your ISP specifies certain DNS server addresses, uncheck EnableAutomatic AssignedDNScheckbox and type the DNS addresses into the PrimaryDNSserver box and SecondaryDNSserver box (if any). Click Save to save the settings.

SettingupdynamicDNS Hosts using dynamic IP addresses can associate with a domain name via Dynamic DNS (DDNS). To use DDNS function, you need first register at a dynamic DNS service provider, such as DDNS, to get a valid account.

DDNS acount request procedures

1. Type www.DynDNS. org to the address box of your Web browser and press Enter.

Read the pol icy and select "Ihaveread...".

2. E n t e r y o u r u s e r name, e-mail address, password, then click CreateAccount.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

3

3. A message prompts out asking you to check your mailbox for the activation letter. Open your mailbox and read the mail.

4. You can find the letter in your E-mail box. Click the hyperlink.

5. The link directs you to a login page. Clicklogin.

6. Enter the user name and password then click Login.

7. After logging in, you can see this welcome message.

8. Select Services tab.

9. Click Add Dynamic DNSHost.

10. Enter the host name then click AddHost.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

40

11. Yo u c a n s e e t h i s message when your hostname is successfully created.

3. Press Save/Apply to save and activate the settings. 4. To verify whether DDNS is working, click Start menu and select Run....Type cmd

and click OK to open the CLI console.

5. Type pingaccount.dyndns.org (your DDNS domain name). If you can see the reply like what is shown in the picture, DDNS is working correctly.

DSL-N13DDNSsettings 1. Click AdvancedSetup->DNS->DynamicDNS to enter the configuration page.

Press Add to configure Dynamic DNS. 2. Choose your DDNS provider and fill in the hostname. The supported DDNS

provider are DynDNS.org and TZO. DynDNS.org settings require username and password of your DDNS account. TZO requires registered Email address and Key.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

41

Settingupdefaultgateway This section allows to manually setup default gateway of Internet connection. 1. Click AdvancedSetup->Routing->DefaultGateway to open the configuration page.

2. By default, automatic assigned default gateway is enabled, that is, the router accepts the first received gateway assignment from ISP. If your ISP specifies a gateway, uncheck EnableAutomaticAssignedDefaultGateway and enter the gateway address.

3. Press Save/Apply to save and activate the settings.

Settingupstaticroute For simple networks that have only one router, you do not need to set up static route. For more complicated network such as an enterprise network where several routers and different subnets exist, you need to configure static routes so as to direct the network traffic correctly. 1. Click AdvancedSetup->Routing->StaticRouteto open the configuration page

and view the current static route settings. Press Add to create a new static route.

2. The configurable settings include: Destination Network: input the IP address of destination; Subnet Mask: input the subnet mask of destination; Use Gateway IP Address: input the gateway network address (optional); User Interface: select the interface of your router to which the static route applies.

3. Press Save/Apply to save and activate the settings.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

42

Settinguproutingprotocol-RIP RIP stands for Rounting Information Protocol. DSL-N13 supports RIPv1 and RIPv2. 1. Click AdvancedSetup->Routing->RIP to open the configuration page.

2. To activate RIP, select Enabled radio button for global RIP mode. 3. To configure an individual interface, select the desired RIP version and operation

and check the Enabled checkbox for the interface. 4. Press Save/Apply to save and activate the settings.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

43

InstantAiDiskSharing

To let other people to log in your FTP without using any account ID and password:

1. Click USBApplication > FTPServer > FTPSettings to open the FTPsettings page (see figure below). This page displays the default settings.

2. Click Save/Apply (see figure above) to save and apply the default settings. By default, DSL-N13 will create two shared folders: ftp_pub and ftp_prt.

Now, people can access your FTP without using any account ID and password to read, write and delete both ftp_pub and ftp_prt folders and other files on the USB disk attached to DSL-N13.

SecuredAiDiskSharing

To allow only a limited number of selected people to access the FTP files:

1. Select Nobehind the AllowAnonymousUsertoLogin option from the FTP Settings page (see figure above).

ASUSAiDiskSetup

Asus AiDisk helps you remotely share your files with an easy-to-remember link. You can choose Instant AiDisk Sharing or Secured AiDisk Sharing first then set up your preferred host name.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

44

2. Click USBApplication > FTPServer > UserList to open the UserList page (see figure below).

3. Click Addfrom the Userlistpage to open the UserListAdd page (see figure below) and to add users. If you want to remove a user, check the Remove box behind that user and click the Remove button.

4. On the UserListAdd page (see figure above), key in the UserName and Password for an allowed user.

5. From the Login folder (rights) drop-down list, select the folder (ftp_pub or ftp_prt) that you allow the user to access and the right (read, write, delete, or any combination) that you want to assign to the user.

6. Click Applybutton.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

45

ASUSDDNSService:SetupAnEasy-to-RememberHostName 1. Click Advanced setup > Dynamic DNS to open the Dynamic DNS page (see figure

below).

2. Click Add from the Dynamic DNS page (see figure above) to open the Add dynamic DDNS page. (see figure below).

3. Input your preferred name in the Hostname bar. Click Check button to see if your preferred name is still available.

4. Choose your current Internet settings from the Interface drop-down list, then click Save/ Apply. DSL-N13 will automatically reboot.

5. You can now have your unique, preferred, and easy-to-remember name to share your AiDisk! Just tell your friends to type ftp://yourpreferredname.asuscomm.com into the address box of their web broswer and press Enter key to get onto your AiDisk with designated user name and password (if any).

DSL-N13WirelessADSL2/2+ModemRouterUserManual

46

DSL-N13 offers two USB2.0 ports for setting up FTP server and sharing USB printer.

FTPserverfunction Before setup, you need to prepare a USB disk for FTP storage.

SettingupFTPserver To setup FTP server: 1. Plug your USB storage into the USB2.0 port on the DSL-N13 rear panel. Then click

USBApplication->FTPServer in the left side menu to open the configuration page.

USBapplications

2. Set EnableFTPServerto Yes. 3. AllowAnonymousUsertoLogin: If you want to allow anonymous user to access

your FTP site, select Yes; if you want to protect your data from unauthenticated user, select No.

4. AllowSuperUser toLogin: Select Yes to allow super user to access the FTP server.

5. FTPPort: Set up the port number of the FTP server. For example, if the port number is set to 1111, you can access the FTP server by typing ftp://12.168.1.1:1111 into the address box of your Web browser (192.168.1.1 is the default IP address of DSL-N13).

6. MaximumUserAllowedtoLogin: set up the maximum login user according to your working environment.

7. LoginTimeoutinSeconds: When login times out, the login trail is terminated. 8. StayTimeoutinSeconds:Timeout value for inactive connection. 9. Press Save/Apply to save and activate the settings.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

47

SettingupFTPaccount You can set up 12 accounts for your FTP site. 1. Click USBApplication->FTPServer->UserList in the left side menu to open the

configuration page. Click Add to create new FTP account.

2. Define the Username, Password for the new account. Setup the Max.Login to restrict the access request. Define the access right to the account.

3. Click Applyto save the new account. 4. Click Save to save and activate the settings.

SettingupFTPsecurity You can deny access request from certain IP address by setting up BannedIPList. 1. Click USBApplication->FTPServer->BannedIPList in the left side menu to

open the configuration page. Click Add to create a new rule.

2. Input the IP address of the banned host and click Apply to save the banned IP. Make sure the banned IP is static.

3. Click Save to save and activate the settings.

Your FTP site is ready. Type ftp://192.168.1.1(:port number) into the address box of your Web browser and press Enter. When prompted for login, input the username and password you have set up for FTP account and login.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

48

SharingUSBprinter You can plug your USB printer to the USB2.0 port of DSL-N13 to share it within your LAN. After you plug a printer to the USB port, you can see the status of printer by clicking USBApplication->PrinterStatus.

1. Run Add Printer Wizard from Start ->PrintersandFaxes ->Adda printer.

2. Select Localprinterattachedto thiscomputer and clickNext.

3. Select Createanewportand set Type of port to StandardTCP/IP Port, then click Next.

4. Click Next to setup TCP/IP port for accessing the network printer.

SettingupprinterclientunderWindowsXP

Follow the steps below to install network printer on your clients.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

4

5. Input the IP address of DSL-N13 in the PrinterNameof IPAddress field and click Next.

6. Select Custom and click Settings...

7. Set Protocol to LPR and type LPRServer in QueueName field. Click Next to continue.

8. Press Next to finish standard TCP/ IP port setting.

9. Press Finish to complete the settings and return to Add Printer Wizard.

10. Install printer driver from the vendor- model list. If your printer is not in the list, click HaveDisk to manually assign the location of driver.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

50

11. Click Next to accept the default name for the printer.

12. Select Yes to print a test page. Click Next to print.

13. The installation is complete. Click Finish to quit the Add Printer Wizard.

If you use Windows 98 or ME which does not support Standard TCP/IP port, you need to use Romote Port which is supported by DSL-N13.

If you have already installed the printer locally on your computer, right click the printer icon and select Property ->Port tab to add a standard TCP/IP port. Click AddPort then select StandardTCP/IPPort and click NewPort button. Refer to Step 5-8 for setting procedures.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

51

This chapter describes how to maintain your DSL-N13 wireless ADSL router.

Configuration backup You can backup the configuration to a file and store it on your computer. Click Management ->Settings to open the configuration page and click the Backup Settings button. Click Save and define the destination folder. The default name for backup file is backupsettings.conf.

Management

Restore settings from a backup file You can restore the settings from a backup file when you have reset the wireless router to factory default. Click Management->Settings->Update to open the configuration page. Click Browse... to locate the backup file on your computer, then click Update Settings button to proceed. When restoring is complete, the wireless router reboots. The whole process takes about 80 seconds.

Resettofactorydefault If you want to clear all settings and return to the factory default settings. You can press the Resetbutton on the rear panel of the wireless router for 10 seconds; or click Management->Settings->RestoreDefaultto open the configuration page and click the RestoreDefaultSettingsbutton.

DSL-N13WirelessADSL2/2+ModemRouterUserManual

52

Settinguptimeserver You can configure the time setting so that DSL-N13 can always synchronize with a time server from Internet. Click Management->Timesettings and check Automatically synchronizewithInternationalservers. Select a time server from the drop-down list and set your time zone. When finished, click Save/Apply.

Firmwareupdate To updat

Manualsnet FAQs

If you want to find out how the DSL-N13 ASUS works, you can view and download the ASUS DSL-N13 Router User Manual on the Manualsnet website.

Yes, we have the User Manual for ASUS DSL-N13 as well as other ASUS manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a ASUS DSL-N13. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the ASUS DSL-N13 Router User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This ASUS DSL-N13 Router User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download ASUS DSL-N13 Router User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print ASUS DSL-N13 Router User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the ASUS DSL-N13 Router User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.