Contents

ASUS A58M-E Motherboard User Manual PDF

1 of 47
1 of 47

Summary of Content for ASUS A58M-E Motherboard User Manual PDF

Mo th

er bo

ar d

A58M-E

ii

E9274 Revised Edition v2 March 2014

Copyright 2014 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (ASUS). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners benefit, without intent to infringe.

Offer to Provide Source Code of Certain Software This product contains copyrighted software that is licensed under the General Public License (GPL), under the Lesser General Public License Version (LGPL) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product. Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either (1) for free by downloading it from http://support.asus.com/download or (2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc. Legal Compliance Dept. 15 Li Te Rd., Beitou, Taipei 112 Taiwan

In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you. The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code. This offer is valid to anyone in receipt of this information. ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).

iii

Contents

Safety information ...................................................................................................... iv

About this guide ......................................................................................................... iv

Package contents ....................................................................................................... vi

A58M-E specifications summary .............................................................................. vi

Product introduction 1.1 Before you proceed ......................................................................................1-1

1.2 Motherboard overview .................................................................................1-1

1.3 Accelerated Processing Unit (APU) ............................................................1-3

1.4 System memory ............................................................................................1-6

1.5 Expansion slots ............................................................................................1-9

1.6 Jumpers .......................................................................................................1-10

1.7 Connectors ..................................................................................................1-11

1.8 Software support ........................................................................................1-19

BIOS information 2.1 Managing and updating your BIOS .............................................................2-1

2.2 BIOS setup program .....................................................................................2-6

2.3 My Favorites ..................................................................................................2-9

2.4 Main menu ...................................................................................................2-10

2.5 Ai Tweaker menu ........................................................................................2-11

2.6 Advanced menu ..........................................................................................2-12

2.7 Monitor menu ..............................................................................................2-12

2.8 Boot menu ...................................................................................................2-13

2.9 Tools menu .................................................................................................2-14

2.10 Exit menu ....................................................................................................2-14

Appendices Notices ..................................................................................................................... A-1

ASUS contact information ...................................................................................... A-4

iv

Safety information

Electrical safety To prevent electrical shock hazard, disconnect the power cable from the electrical outlet

before relocating the system.

When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.

Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.

Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

Operation safety Before installing the motherboard and adding devices on it, carefully read all the manuals

that came with the package.

Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.

To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.

Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.

Place the product on a stable surface.

If you encounter technical problems with the product, contact a qualified service technician or your retailer.

About this guide This user guide contains the information you need when installing and configuring the motherboard.

How this guide is organized This guide contains the following parts:

Chapter1:Productintroduction

This chapter describes the features of the motherboard and the new technology it supports.

Chapter2:BIOSinformation

This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.

v

Where to find more information Refer to the following sources for additional information and for product and software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.

Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.

CAUTION: Information to prevent damage to the components when trying to complete a task

IMPORTANT: Instructions that you MUST follow to complete a task. .

NOTE: Tips and additional information to help you complete a task.

Typography

Bold text Indicates a menu or an item to select.

Italics Used to emphasize a word or a phrase.

Keys enclosed in the less-than and greater-than sign means that you must press the enclosed key.

Example: means that you must press the Enter or Return key.

+ + If you must press two or more keys simultaneously, the key names are linked with a plus sign (+).

vi

(continued on the next page)

A58M-E specifications summary

CPU AMD FM2+ Socket for AMD A-Series/Athlon Series processors

AMD Turbo Core Technology 3.0 support

Supports APU up to 4 cores Refertowww.asus.com for the AMD CPU support list.

Chipset AMD A58 FCH (Bolton D2)

Memory 2 x DDR3 DIMM, max. 32GB, DDR3 2400 (O.C.) / 2133* / 1866 / 1600 / 1333 MHz, non-ECC un-buffered memory

Dual-channel memory architecture

Supports AMD Memory Profile (AMP) memory * Hyper DIMM support is subject to the physical characteristics of individual

CPUs.

Themaximum32GBmemorycapacitycanbesupportedwith16GBorabove DIMMs. ASUS will update the memory QVL once the DIMMs are available in the market.

Refertowww.asus.com for the latest Memory QVL (Qualified Vendors List).

Whenyouinstallatotalmemoryof4GBcapacityormore,Windows 32-bit operating system may only recognize less than 3GB. We recommend a maximum of 3GB system memory if you are using a Windows 32-bit operating system.

Graphics Integrated AMD Radeon R/HD8000/7000 Series Graphics in the A- Series APU

Multi-VGA output support: DVI-D and D-Sub

Supports Dual-link DVI with max. resolution 2560x1600@60Hz

Supports D-Sub with max. resolution 1920x1600@60Hz

AMD Dual Graphics technology support*

Maximum shared memory of 2G

Supports AMD Dual Graphics technology * Refer to http://www.amd.com/us/products/technologies/dual-graphics/

Pages/dual-graphics.aspx#3 for the discrete GPUs which support Dual Graphics technology.

Expansion slots 1 x PCIe 3.0*/2.0 x16 slot

1 x PCIe 2.0 x1 slot

1 x PCI slot PCIe3.0issupportedbyFM2+processorsonly.

Package contents Check your motherboard package for the following items.

Motherboard ASUS A58M-E motherboard

Cables 2 x Serial ATA 3.0 Gb/s cables

Accessories 1 x I/O Shield

Application DVD Support DVD

Documentation User Guide

If any of the above items is damaged or missing, contact your retailer.

vii

A58M-E specifications summary

Storage / RAID AMD A58 FCH:

- 6 x Serial ATA 3.0Gb/s connectors (dark brown) support RAID 0, RAID 1, RAID 10, and JBOD configurations

LAN Realtek 8111GR Gigabit LAN controller

Audio Realtek ALC887-VD 7.1-channel High Definition Audio CODEC UseachassiswithHDaudiomoduleinthefrontpaneltosupporta7.1-channel

audio output.

USB AMD A58 FCH:

- 8 x USB 2.0/1.1 ports (4 ports at the mid-board, 4 ports at the back panel)

ASUS unique features

ASUS 5X Protection - ASUS motherboards safeguard your PC with 5X Protection: DIGI+VRM,

DRAM Fuse, ESD Guards, High-Quality 5K-Hour Solid Capacitors, and Stainless Steel Back I/O to ensure the best quality, reliability, and durability

ASUSDigi+VRM - ASUS DIGI+ VRM: Digital Power Design for the APU

- ASUS 3+1 Phase Power Design

ASUS Enhanced DRAM Overcurrent Protection - Enhanced DRAM overcurrent protection and short circuit damage prevention

ASUS ESD Guards - Enhanced ESD protection for extended component lifespan

ASUS High-Quality 5K-Hour Solid Capacitors - 2.5x Longer lifespan with excellent durability

ASUS Stainless Steel Back I/O - 3x More durable corrosion-resistant coating

ASUS Exclusive Features - EPU

- AI Suite 3

- AI Charger

- Anti-Surge

ASUS Quiet Thermal Solutions

- ASUS Fanless Design: Stylish heatsink solution

- ASUS Fan Xpert

ASUS EZ DIY - ASUS UEFI BIOS EZ Mode featuring firendly graphics user interface

- ASUS CrashFree BIOS 3

- ASUS EZ Flash 2

- ASUS MyLogo 2

(continued on the next page)

viii

A58M-E specifications summary

Specifications are subject to change without notice.

Back Panel I/O ports

1 x PS/2 mouse port (green)

1 x PS/2 keyboard port (purple)

1 x DVI-D port

1 x D-Sub output port

1 x LAN (RJ-45) port

4 x USB 2.0/1.1 ports

7.1-channel audio I/O ports (3-jack)

Internal I/O connectors

2 x USB 2.0 connectors support additional 4 USB 2.0 ports

6 x SATA 3.0Gb/s connectors

1 x COM connector

1 x TPM header

1 x System panel connector

1 x Internal Speaker connector

1 x 4-pin CPU fan connector

1 x S/PDIF output connector

1 x 4-pin Chassis fan connector

1 x High Definition Front panel audio connector

1 x 24-pin EATX power connector

1 x 4-pin ATX 12V power connector

BIOS 64 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI 2.0, WfM 2.0, SM BIOS v2.6, ACPI 2.0a

Support DVD Drivers

ASUS Update

ASUS utilities

Anti-Virus software (OEM version)

Operating System Support

Windows 8.1, 32bit/64-bit

Windows 8, 32bit/64-bit

Windows 7, 32bit/64-bit

Windows XP, 32bit

Form factor uATX form factor: 8.9 in x 7.2 in (22.6 cm x 18.3 cm)

ASUS A58M-E 1-1

Product introduction 1 1.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings.

Unplug the power cord from the wall socket before touching any component.

Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.

Hold components by the edges to avoid touching the ICs on them.

Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.

Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.

1.2 Motherboard overview Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.

Ensure that you unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components.

1.2.1 Placement direction When installing the motherboard, ensure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below.

1.2.2 Screw holes Place six screws into the holes indicated by circles to secure the motherboard to the chassis.

Do not overtighten the screws! Doing so can damage the motherboard.

1-2 Chapter 1: Product introduction

A58M-E

Place this side towards the rear of the chassis

1.2.3 Motherboard layout

A58M-E PCIEX16

PCIEX1_1

PCI1 F_PANEL

SPEAKER

COM CLRTC

USB56 USB34

AAFP

SPDIF_OUT

ATX12V

E A

TX P

W R

CPU_FAN CHA_FAN

BATTERYSuper I/O

ALC 887

8111 GR

64Mb BIOS

22 .6

cm (8

.9 in

)

AMD

A58

D D

R 3

D IM

M _A

1 (6

4b it,

2 40

-p in

m od

ul e)

D D

R 3

D IM

M _B

1 (6

4b it,

2 40

-p in

m od

ul e)

SATA3G_1 SATA3G_2 SATA3G_3

S A

TA 3G

_4 S

A TA

3G _5

S A

TA 3G

_6

AUDIO

KBMS

LAN_USB12

USB1112

18.3cm(7.2in)

D V

I_ V

G A

S O

C K

E T

FM 2+

DIGI +VRM

TPM

21 43

6

1

5

7

8910111213 6

ASUS A58M-E 1-3

Connectors/Jumpers/Slots/LED Page

1. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) 1-14 2. AMD FM2+ socket 1-3 3. CPU and chassis fan connectors (4-pin CPU_FAN and 4-pin CHA_FAN) 1-13 4. DDR3 DIMM slots 1-6 5. Speaker connector (4-pin SPEAKER) 1-17 6. SATA 3.0Gb/s connectors (7-pin SATA3G_1~6) 1-15 7. System panel connector (10-1 pin F_PANEL) 1-16 8. USB 2.0 connectors (10-1 pin USB34, USB56) 1-18 9. Clear RTC RAM (3-pin CLRTC) 1-10 10. TPM connector (20-1 pin TPM) 1-13 11. Digital audio connector (4-1 pin SPDIF_OUT) 1-15 12. Serial port connector (10-1 pin COM) 1-18 13. Front panel audio connector (10-1 pin AAFP) 1-17

Ensure that you use an APU designed for the FM2+ socket. The APU fits in only one correct orientation. DO NOT force the APU into the socket to prevent bending the pins and damaging the APU!

1.3 Accelerated Processing Unit (APU) This motherboard comes with an FM2+ socket designed for AMD A-series / Athlon Series graphics.

A58M-E

A58M-E CPU socket FM2+

1-4 Chapter 1: Product introduction

1.3.1 Installing the APU

1 2

43

1.3.2 APU heatsink and fan assembly installation

Apply the Thermal Interface Material to the APU heatsink and APU before you install the heatsink and fan if necessary.

ASUS A58M-E 1-5

1 2

To install the APU heatsink and fan assembly

53 4

To uninstall the APU heatsink and fan assembly

1 2 3

1-6 Chapter 1: Product introduction

54

1.4 System memory

1.4.1 Overview The motherboard comes with two Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets.

A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for better performance with less power consumption.

The figure illustrates the location of the DDR3 DIMM sockets:

Channel Sockets

Channel A DIMM_A1

Channel B DIMM_B1 A58M-E

A58M-E 240-pin DDR3 DIMM sockets

D IM

M _A

1 D

IM M

_B 1

ASUS A58M-E 1-7

1.4.2 Memory configurations You may install 1GB, 2GB, 4GB, and 8GB unbuffered non-ECC DDR3 DIMMs into the DIMM sockets.

You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.

Always install DIMMs with the same CAS latency. For optimal compatibility, we recommend that you install memory modules of the same version or date code (D/C) from the same vendor. Check with the retailer to get the correct memory modules.

Due to the memory address limitation on 32-bit Windows OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS can be about 3GB or less. For effective use of memory, we recommend that you do any of the following:

- Install a maximum of 3GB system memory if you are using a 32-bit Windows OS. - Use a 64-bit Windows OS if you want to install 4GB or more memory on the motherboard.

This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less.

The maximum 32GB memory capacity can be supported with 16GB or above DIMMs. ASUS will update the memory QVL once the DIMMs are available in the market.

The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. To operate at the vendor-marked or at a higher frequency, refer to section 2.5 Ai Tweaker menu for manual memory frequency adjustment.

For system stability, use a more efficient memory cooling system to support a full memory load (2 DIMMs) or overclocking condition.

Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List).

1-8 Chapter 1: Product introduction

1.4.3 Installing a DIMM

1

2

3

To remove a DIMM

B

A

A

ASUS A58M-E 1-9

1.5 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support.

Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.

1.5.1 Installing an expansion card To install an expansion card:

1. Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card.

2. Remove the system unit cover (if your motherboard is already installed in a chassis).

3. Remove the bracket opposite the slot that you intend to use. Keep the screw for later use.

4. Align the card connector with the slot and press firmly until the card is completely seated on the slot.

5. Secure the card to the chassis with the screw you removed earlier.

6. Replace the system cover.

1.5.2 Configuring an expansion card After installing the expansion card, configure it by adjusting the software settings.

1. Turn on the system and change the necessary BIOS settings, if any. See Chapter 2 for information on BIOS setup.

2. Assign an IRQ to the card.

3. Install the software drivers for the expansion card.

When using PCI cards on shared slots, ensure that the drivers support Share IRQ or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable.

1.5.3 PCI slot The PCI slot supports cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications.

1-10 Chapter 1: Product introduction

1.5.4 PCI Express x1 slot This motherboard supports PCI Express 2.0 x1 network cards, SCSI cards, and other cards that comply with the PCI Express specifications.

1.5.5 PCI Express x16 slot This motherboard supports one PCI Express 3.0/2.0 x16 graphics cards that comply with the PCI Express specifications.

IRQ assignments for this motherboard

A B C D E F G H

PCIEx16_1 shared

PCIEx1_1 shared

PCI1 slot shared

Realtek LAN controller shared -

HD audio shared

SATA controller shared

On Chip USB EHCI 1/2/3 shared

On Chip USB OHCI 1/2/3/4 shared

1.6 Jumpers Clear RTC RAM (3-pin CLRTC)

This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords.

A58M-E

A58M-E Clear RTC RAM

1 2 2 3

Normal (Default)

Clear RTC

CLRTC

ASUS A58M-E 1-11

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.

2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for about 5-10 seconds, then move the cap back to pins 1-2.

3. Plug the power cord and turn ON the computer.

4. Hold down the <Del> key during the boot process and enter BIOS setup to re- enter data.

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. Removing the cap will cause system boot failure!

If the steps above do not help, remove the onboard battery and move the jumper again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.

You do not need to clear the RTC when the system hangs due to overclocking. For system failure due to overclocking, use the CPU Parameter Recall (C.P.R.) feature. Shut down and reboot the system, then the BIOS automatically resets parameter settings to default values.

1.7 Connectors

1.7.1 Rear panel connectors

1. PS/2 Mouse port (green). This port is for a PS/2 mouse.

2. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other VGA-compatible devices.

3. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.

4 53

68 7

1

10

2

9

1-12 Chapter 1: Product introduction

4. Line In port (light blue). This port connects to the tape, CD, DVD player, or other audio sources.

5. Line Out port (lime). This port connects to a headphone or a speaker. In the 4.1, 5.1, and 7.1-channel configurations, the function of this port becomes Front Speaker Out.

6. Microphone port (pink). This port connects to a microphone.

Refer to the audio configuration table below for the function of the audio ports in 2.1, 4.1, 5.1, or 7.1-channel configuration.

Audio2.1,4.1,5.1,or7.1-channelconfiguration

Port Headset

2.1- channel

4.1-channel 5.1-channel 7.1-channel

Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center Lime (Front panel) Side Speaker Out

Toconfigurea7.1-channelaudiooutput:

Use a chassis with HD audio module in the front panel to support a 7.1-channel audio output.

7. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices.

8. USB 2.0 ports 11 and 12. These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices.

9. DVI-D port. This port is for any DVI-D compatible device. DVI-D cant be converted to output RGB Signal to CRT and isnt compatible with DVI-I.

10. PS/2 Keyboard port (purple). This port is for a PS/2 keyboard.

LAN port

SPEED LED

ACT/LINK LED

Activity/Link LED Speed LED

Status Description Status Description

Off No link OFF 10Mbps connection Orange Linked ORANGE 100Mbps connection Orange (Blinking) Data activity GREEN 1Gbps connection Orange (Blinking then steady)

Ready to wake up from S5 mode

LAN port LED indications

ASUS A58M-E 1-13

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors.

The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan power.

The CPU_FAN and CHA_FAN connectors support the ASUS Fan Xpert feature.

1.7.2 Internal connectors 1. CPUandchassisfanconnectors(4-pinCPU_FAN,and4-pinCHA_FAN)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.

A58M-E

A58M-E Fan connectors

CPU_FAN

C P

U F

A N

P W

M C

P U

F A

N IN

C P

U F

A N

P W

R G

N D

CHA_FAN

C H

A F

A N

P W

M C

H A

F A

N IN

C H

A F

A N

P W

R G

N D

2. TPM connector (20-1 pin TPM)

This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity.

A58M-E

A58M-E TPM Connector

PIN 1

TPM

S B

_S U

S _S

TA T

G N

D +3

V S

B S

M B

S C

L LA

D 0

+3 V

LA D

3 P

C IR

S T#

FR A

M E

P C

IC LK

R E

S E

T G

P IO

S E

R IR

Q S

M B

S D

A G

N D

LA D

1 LA

D 2

P W

R O

W N

G N

D

The TPM module is purchased separately.

1-14 Chapter 1: Product introduction

3. ATXpowerconnectors(24-pinEATXPWR,4-pinATX12V)

These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

We recommend that you use an ATX 12V Specification 2.0-compliant power supply unit (PSU) with a minimum of 300W power rating. This PSU type has 24-pin and 4-pin power plugs.

If you intend to use a PSU with 20-pin and 4-pin power plugs, ensure that the 20-pin power plug can provide at least 15 A on +12 V and that the PSU has a minimum power rating of 300W. The system may become unstable or may not boot up if the power is inadequate.

DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the system will not boot up.

We recommend that you use a PSU with higher power output when configuring a system with more power-consuming devices or when you intend to install additional devices. The system may become unstable or may not boot up if the power is inadequate.

If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.

A58M-E

A58M-E ATX power connectors

EATXPWR

PIN 1

GND +5 Volts +5 Volts +5 Volts -5 Volts GND GND GND PSON# GND -12 Volts +3 Volts

+3 Volts +12 Volts +12 Volts

+5V Standby Power OK

GND +5 Volts

GND +5 Volts

GND +3 Volts +3 Volts

ATX12V

PIN 1

+1 2V

D C

+1 2V

D C

G N

D G

N D

ASUS A58M-E 1-15

4. Serial ATA 3.0 Gb/s connectors (7-pin SATA3G 1~6)

These connectors are for the Serial ATA 3.0 Gb/s signal cables for Serial ATA hard disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, or RAID 10 configuration through the onboard controller.

These connectors are set to AHCI mode by default. If you intend to create a Serial ATA RAID set using these connectors, set the type of the SATA connectors in the BIOS to [RAID].

You must install Windows XP Service Pack 3 or later version before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows XP SP3 or later version.

When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to [AHCI].

SATA3G_2

G N

D R

S A

TA _T

X P

1 R

S A

TA _T

X N

1 G

N D

R S

A TA

_R X

N 1

R S

A TA

_R X

P 1

G N

D

SATA3G_1 G

N D

R S

A TA

_T X

P 2

R S

A TA

_T X

N 2

G N

D R

S A

TA _R

X N

2 R

S A

TA _R

X P

2 G

N D

SATA3G_3

G N

D R

S A

TA _T

X P

3 R

S A

TA _T

X N

3 G

N D

R S

A TA

_R X

N 3

R S

A TA

_R X

P 3

G N

D

SATA3G_4

GND RSATA_RXP4 RSATA_RXN4 GND RSATA_TXN4 RSATA_TXP4 GND

SATA3G_5

GND RSATA_RXP5 RSATA_RXN5 GND RSATA_TXN5 RSATA_TXP5 GND

SATA3G_6

GND RSATA_RXP6 RSATA_RXN6 GND RSATA_TXN6 RSATA_TXP6 GND

A58M-E

A58M-E SATA 3.0Gb/s connectors

5. Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port.

SPDIF_OUT

+5 V

S P

D IF

O U

T G

N D

A58M-E

A58M-E Digital audio connector

The S/PDIF module is purchased separately.

1-16 Chapter 1: Product introduction

6. System panel connector (10-1 pin PANEL)

This connector supports several chassis-mounted functions.

SystempowerLED(2-pinPWR_LED)

This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

Hard disk drive activity LED (2-pin HDD_LED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The HDD LED lights up or flashes when data is read from or written to the HDD.

ATX power button/soft-off button (2-pin PWR_BTN)

This 2-pin connector is for the system power button.

Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.

A58M-E

PIN 1

PWR BTN

P W

R _L

E D

+ P

W R

_L E

D -

P W

R G

N D

H D

D _L

E D

+ H

D D

_L E

D -

G ro

un d

H W

R S

T# (N

C )

F_PANEL +PWR LED

+HDD_LED RESET

A58M-E System panel connector

ASUS A58M-E 1-17

7. Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports either High Definition Audio or AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.

We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard high-definition audio capability.

If you want to connect a high definition front panel audio module to this connector, set the Front Panel Type item in the BIOS to [HD].

The front panel audio I/O module is purchased separately.

A58M-E

A58M-E Speaker Out Connector

+5 V

G N

D G

N D

S pe

ak er

O ut

SPEAKER

PIN 1

A58M-E

A58M-E Front panel audio connector

AAFP PIN 1

A G

N D

N C

S E

N S

E 1_

R E

TU R

S E

N S

E 2_

R E

TU R

P O

R T1

L P

O R

T1 R

P O

R T2

R S

E N

S E

_S E

N D

P O

R T2

L HD-audio-compliant

pin definition

PIN 1

A G

N D

N C

N C

N C

M IC

2 M

IC P

W R

Li ne

o ut

_R N C

Li ne

o ut

_L

Legacy AC97 compliant definition

8. Speaker connector (4-pin SPEAKER)

The 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings.

1-18 Chapter 1: Product introduction

9. USB2.0connectors(10-1pinUSB34,USB56)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480Mbps connection speed.

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

The USB 2.0 module is purchased separately.

10. Serial port connector (10-1 pin COM)

This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.

The COM module is purchased separately.

A58M-E

A58M-E USB2.0 connectors

PIN 1

U S

B +5

V U

S B

_P 5-

U S

B _P

5+ G

N D

N C

U S

B +5

V U

S B

_P 6-

U S

B _P

6+ G

N D

USB56 USB34

PIN 1 U

S B

+5 V

U S

B _P

3- U

S B

_P 3+

G N

D N

C

U S

B +5

V U

S B

_P 4-

U S

B _P

4+ G

N D

A58M-E

A58M-E Serial port connectors

PIN 1

COM

D C

D D

XT D

N G

ST R

I R

D X

R RT

D R

S D

ST C

ASUS A58M-E 1-19

1.8 Software support

1.8.1 Installing an operating system This motherboard supports Windows 8.1 (32bit/64bit) / Windows 8 (32bit/64bit) / Windows 7 (32bit/64bit) / Windows XP Operating Systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware.

Motherboard settings and hardware options vary. Refer to your OS documentation for detailed information.

Ensure that you install Windows XP Service Pack 3 or later versions before installing the drivers for better compatibility and system stability.

1.8.2 Support DVD information The Support DVD that comes with the motherboard package contains the drivers, software applications, and utilities that you can install to avail all motherboard features.

The contents of the Support DVD are subject to change at any time without notice. Visit the ASUS website at www.asus.com for updates.

To run the Support DVD Place the Support DVD into the optical drive. If Autorun is enabled in your computer, the DVD automatically displays the Specials screen which contains the unique features of ASUS motherboard. Click Drivers, Utilities, Make Disk, Manual, Contact and Specials tabs to display their respective menus.

The following screen is for reference only.

Click an item to install

Click an icon to display Support DVD/motherboard information

If Autorun is NOT enabled in your computer, browse the contents of the Support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the DVD.

1-20 Chapter 1: Product introduction

ASUS A58M-E 2-1

BIOS information 2 2.1 Managing and updating your BIOS

Save a copy of the original motherboard BIOS file to a USB flash disk in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update utility.

2.1.1 EZ Update EZ Update is a utility that allows you to automatically update your motherboards softwares, drivers and the BIOS version easily. With this utlity, you can also manually update the saved BIOS and select a boot logo when the system goes into POST.

To launch EZ Update, click EZ Update on the AI Suite 3 main menu bar.

C:\Users\test\Downloads\A58M-E-ASUS-02...

Model Name: A58M-E Version:0203 Release Date: 01/28/2014

File: A58M-E-ASUS-0205.CAP Model Name: A58M-E Version:0205 Release Date: 02/12/2014

Click to automatically update your

motherboards driver,softwareand

firmware

Click to find and select the BIOS

from file

Click to select a boot logo

Click to update the BIOS

EZ Update requires an Internet connection either through a network or an ISP (Internet Service Provider).

2-2 Chapter 2: Getting started

2.1.2 ASUS EZ Flash 2 The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based utility.

Before you start using this utility, download the latest BIOS file from the ASUS website at www.asus.com.

ToupdatetheBIOSusingEZFlash2:

1. Insert the USB flash disk that contains the latest BIOS file to the USB port.

2. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ Flash 2 Utility and press to enable it.

3. Press to switch to the Drive field.

4. Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS, and then press .

5. Press to switch to the Folder Info field.

6. Press the Up/Down arrow keys to find the BIOS file, and then press to perform the BIOS update process. Reboot the system when the update process is done.

This function supports USB flash disks with FAT 32/16 format and single partition only.

DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure!

2.1.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the updated BIOS file.

Before using this utility, rename the BIOS file in the removable device into A58ME.CAP.

The BIOS file in the support DVD may not be the latest version. Download the latest BIOS file from the ASUS website at www.asus.com.

ASUS A58M-E 2-3

Recovering the BIOS TorecovertheBIOS:

1. Turn on the system.

2. Insert the support DVD to the optical drive or the USB flash drive that contains the BIOS file to the USB port.

3. The utility automatically checks the devices for the BIOS file. When found, the utility reads the BIOS file and enters ASUS EZ Flash 2 utility automatically.

4. The system requires you to enter BIOS Setup to recover BIOS setting. To ensure system compatibility and stability, we recommend that you press to load default BIOS values.

DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure!

2.1.4 ASUS BIOS Updater ASUS BIOS Updater allows you to update the BIOS in DOS environment.

The screen captures used in this section are for reference only and may not be exactly the same as actually shown on your computer screen.

Before updating BIOS

Prepare the motherboard support DVD and a USB flash drive.

Download the latest BIOS file and BIOS Updater from http://support.asus.com and save them in your USB flash drive.

NTFS is not supported under FreeDOS environment. Ensure that your USB flash drive is in single partition and in FAT32/16 format.

Turn off the computer.

Ensure that your computer has a DVD optical drive.

Booting the system in DOS environment To boot the system in DOS:

1. Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port.

2. Boot your computer then press to launch the select boot device screen.

3. When the select boot device screen appears, insert the Support DVD into the optical drive then select the optical drive as the boot device.

2-4 Chapter 2: Getting started

Please select boot device:

E1: ASUS DVD-E818A6T (4069MB) USB DISK 2.0 (3824MB) UEFI: (FAT) USB DISK 2.0 (3824MB) Enter Setup

and to move selection ENTER to select boot device ESC to boot using defaults

4. When the booting message appears, press within five (5) seconds to enter FreeDOS prompt.

Updating the BIOS file To update the BIOS file:

1. On the FreeDOS prompt, type bupdater /pc /g and press .

2. On the BIOS Updater screen, press to switch from Files panel to Drives panel then select D:.

Welcome to FreeDOS (http://www.freedos.org)! C:/> d: D:/>

D:/> bupdater /pc /g

5. On the FreeDOS prompt, type d: then press to switch the disk from Drive C (optical drive) to Drive D (USB flash drive).

ISOLINUX 3.20 2006-08-26 Copyright (C) 1994-2005 H. Peter Anvin A Bootable DVD/CD is detected. Press ENTER to boot from the DVD/CD. If no key is pressed within 5 seconds, the system will boot next priority device automatically. boot:

ASUS A58M-E 2-5

ASUSTeK BIOS Updater for DOS V1.30 [2014/01/01]

Current ROM BOARD: A58M-E VER: 0210 (H :00 B :00) DATE: 02/12/2014

Update ROM BOARD: Unknown VER: Unknown DATE: Unknown

PATH: C:\

C: D:

FORMAN~1

A58ME.CAP 8390626 2014-02-10 21:14:34

Note [Enter] Select or Load [Tab] Switch [V] Drive Info [Up/Down/Home/End] Move [Esc] Exit

Files panelDrives panel

3. Press to switch from Drives panel to Files panel then press keys to select the BIOS file and press .

5. Select Yes then press . When BIOS update is done, press to exit BIOS Updater.

6. Restart your computer.

DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure.

Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit BIOS menu.

4. After the BIOS Updater checks the selected BIOS file, select Yes to confirm the BIOS update.

Are you sure you want to update the BIOS?

Yes No

The BIOS Backup feature is not supported due to security regulations.

2-6 Chapter 2: Getting started

2.2 BIOS setup program Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program.

Entering BIOS Setup at startup ToenterBIOSSetupatstartup:

Press during the Power-On Self Test (POST). If you do not press , POST continues with its routines.

Entering BIOS Setup after POST ToenterBIOSSetupafterPOST:

Press + + simultaneously.

Press the reset button on the system chassis.

Press the power button to turn the system off then back on. Do this option only if you failed to enter BIOS Setup using the first two options.

Using the power button, reset button, or the + + keys to force reset from a running operating system can cause damage to your data or system. We recommend to always shut down the system properly from the operating system.

The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen.

Visit the ASUS website at www.asus.com to download the latest BIOS file for this motherboard.

Ensure that a USB mouse is connected to your motherboard if you want to use the mouse to control the BIOS setup program.

If the system becomes unstable after changing any BIOS setting, load the default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu or press hotkey F5. See section 2.10 Exit Menu for details.

If the system fails to boot after changing any BIOS setting, try to clear the CMOS and reset the motherboard to the default value. See section 1.6 Jumpers for information on how to erase the RTC RAM.

BIOS menu screen The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode. You can change modes from the Exit menu or from the Exit/Advanced Mode button in the EZ Mode/Advanced Mode screen.

ASUS A58M-E 2-7

The boot device options vary depending on the devices you installed to the system.

The Boot Menu(F8) button is available only when the boot device is installed to the system.

Exits the BIOS setup program without saving thechanges,savesthechangesandresets thesystem,orenterstheAdvancedMode

Selects the display language of the BIOS setup program

DisplaystheCPUtemperature,CPU/5V/3.3V/12V voltageoutput,CPU/chassisfanspeed

Power Saving mode

Normal mode

Loads optimized default

Displays the system properties of the selected mode on the right hand side

Selects the Advanced mode functions

Displays the Advanced mode menus

SATA information

Selects the boot device priority

Selects the boot device priority

EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority. To access the Advanced Mode, click Exit/Advanced Mode or press F7 for the advanced BIOS settings.

The default screen for entering the BIOS setup program can be changed.

2-8 Chapter 2: Getting started

Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations.

To access the EZ Mode, click Exit, then select ASUS EZ Mode or press F7.

Menu bar The menu bar on top of the screen has the following main items:

My Favorites For saving the frequently-used system settings and configuration Main For changing the basic system configuration Ai Tweaker For changing the overclocking settings Advanced For changing the advanced system settings

Monitor For displaying the system temperature, power status, and changing the fan settings

Boot For changing the system boot configuration Tool For configuring options for special functions Exit For selecting the exit options and loading default settings

Navigation keys

General helpMenu bar

Submenu item

Configuration fieldsMenu itemsBack button

Last modified settings

Quick note

Pop-up window

ASUS A58M-E 2-9

Adding items to My Favorites To add frequently-used BIOS items to My Favorites:

1. Use the arrow keys to select an item that you want to add. When using a mouse, hover the pointer to the item.

2. Press on your keyboard or right-click on your mouse to add the item to My Favorites page.

You cannot add the following items to My Favorites:

Items with submenu options

User-configurable items such as language and boot device order

Configuration items such as Memory SPD Information, system time and date

2.3 My Favorites MyFavorites is your personal space where you can easily save and access your favorite

BIOS items.

2-10 Chapter 2: Getting started

2.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings.

If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 1.6 Jumpers for information on how to erase the RTC RAM.

The Administrator or User Password items on top of the screen show the default Not Installed. After you set a password, these items show Installed.

ASUS A58M-E 2-11

2.5 Ai Tweaker menu The Ai Tweaker menu items allow you to configure overclocking-related items.

Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction.

The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard.

Scroll down to display the other items.

2-12 Chapter 2: Getting started

2.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices.

Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction.

2.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings.

Scroll down to display the other items.

ASUS A58M-E 2-13

2.8 Boot menu The Boot menu items allow you to change the system boot options.

Scroll down to display the other items.

2-14 Chapter 2: Getting started

2.9 Tools menu The Tools menu items allow you to configure options for special functions. Select an item then press to display the submenu.

2.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu.

ASUS A58M-E A-1

Appendices

Notices

Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturers instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate this equipment.

A-2 Appendices

IC:CanadianComplianceStatement Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations.

This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Cut appareil numrique de la Classe B est conforme la norme NMB-003 du Canada. Cet appareil numrique de la Classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada.

Cet appareil est conforme aux normes CNR exemptes de licence dIndustrie Canada. Le fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer dinterfrences et

(2) cet appareil doit accepter toute interfrence, y compris celles susceptibles de provoquer un fonctionnement non souhait de lappareil.

Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

VCCI:JapanComplianceStatement

VCCI Class B Statement

KC:KoreaWarningStatement

ASUS A58M-E A-3

REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.

DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.

ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

A-4 Appendices

ASUS contact information

ASUSTeK COMPUTER INC. Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 Telephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www.asus.com/tw/

Technical Support Telephone +86-21-38429911 Fax +86-21-58668722, ext.9101# Online support http://www.asus.com/tw/support/

ASUS COMPUTER INTERNATIONAL (America) Address 800 Corporate Way, Fremont, CA 94539, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site http://www.asus.com/us/

Technical Support General support +1-812-282-2787 Support fax +1-812-284-0883 Online support http://www.service.asus.com/

ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany Fax +49-2102-959931 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales

Technical Support Telephone +49-2102-5789555 Support Fax +49-2102-959911 Online support http://www.asus.com/de/support/

ASUS A58M-E A-5

D E

C L

A R

A T

IO N

O F

C O

N F

O R

M IT

Y

P er

F C

C P

ar t

2 S

ec ti

o n 2

. 1 0 7 7 (a

)

R

es p

o n

si b

le P

a rt

y N

a m

e:

A su

s C

o m

p u

te r

In te

rn a

ti o

n a

l

A

d d

re ss

: 8 0 0 C

o rp

o ra

te W

a y ,

F re

m o n

t, C

A 9

4 5

3 9

.

P

h o

n e/

F a

x N

o :

(5 1 0 )7

3 9 -3

7 7 7 /(

5 1 0 )6

0 8 -4

5 5 5

h er

eb y d

ec la

re s

th at

t h

e p ro

d u ct

P

ro d

u c

t N

a m

e :

M o

th e

rb o

a rd

M

o d

e l

N u

m b

e r

: A

5 8

M -A

/U S

B 3

, A

5 8

M -E

, A

5 8

M -K

C o

n fo

rm s

to t

h e

fo ll

o w

in g s

p ec

if ic

at io

n s:

F

C C

P ar

t 1 5 , S

u b p ar

t B

, U n

in te

n ti

o n

al R

ad ia

to rs

S u

p p

le m

en ta

ry I

n fo

rm a

ti o

n :

T h is

d ev

ic e

co m

p li

es w

it h p

ar t

1 5 o

f th

e F

C C

R u le

s. O

p er

at io

n i

s su

b je

ct t

o t

h e

fo ll

o w

in g t

w o c

o n d it

io n s:

( 1 )

T h is

d ev

ic e

m ay

n o t

ca u se

h ar

m fu

l in

te rf

er en

ce ,

an d (

2 )

th is

d ev

ic e

m u st

a cc

ep t

an y

in te

rf er

en ce

r ec

ei v ed

, in

cl u d in

g i

n te

rf er

en ce

th at

m ay

c au

se u

n d es

ir ed

o p er

at io

n .

R

ep re

se n

ta ti

v e

P er

so n

s N

am e

:

S te

v e

C h

a n

g /

P re

si d

en t

S ig

n at

u re

:

D

at e

: F

eb .

2 6

, 2

0 1

4

V

e r.

1 2 0 6 0 1

E C

D e

c la

ra ti

o n

o f

C o

n fo

rm it

y

W e

, th

e u

n d

e rs

ig n

e d

, M

a n

u fa

c tu

re r:

A

S U

S T

e K

C O

M P

U T

E R

I N

C .

A d

d re

s s

, C

it y :

4 F

, N

o . 1

5 0

, L

I- T

E R

d .,

P E

IT O

U ,

T A

IP E

I 1

1 2

, T

A IW

A N

C o

u n

tr y :

T A

IW A

N

A

u th

o ri

z e

d r

e p

re s

e n

ta ti

v e

i n

E u

ro p

e :

A S

U S

C O

M P

U T

E R

G m

b H

A d

d re

s s

, C

it y :

H A

R K

O R

T S

T R

. 2

1 -2

3 , 4

0 8

8 0 R

A T

IN G

E N

C o

u n

tr y :

G E

R M

A N

Y

d e

c la

re t

h e

f o

ll o

w in

g a

p p

a ra

tu s :

P ro

d u

c t

n a m

e :

M

o th

e rb

o a

rd

M o

d e l n

a m

e :

A

5 8 M

-A /U

S B

3 ,

A 5

8 M

-E ,

A 5 8 M

-K

c o

n fo

rm w

it h

t h

e e

s s e n

ti a l re

q u

ir e m

e n

ts o

f th

e f

o ll o

w in

g d

ir e c ti

v e s :

2 0 0 4

/1 0

8 /E

C -E

M C

D ir

e c ti

v e

E

N 5

5 0 2

2 :2

0 1

0 +

A C

:2 0

1 1

E

N 6

1 0 0

0 -3

-2 :2

0 0

6 +

A 2

:2 0

0 9

E

N 5

5 0 1

3 :2

0 0

1 +

A 1

:2 0 0

3 +

A 2 :2

0 0

6

E

N 5

5 0 2

4 :2

0 1

0

E

N 6

1 0 0

0 -3

-3 :2

0 0

8

E

N 5

5 0 2

0 :2

0 0

7 +

A 1

1 :2

0 1

1

1 9 9 9

/5 /E

C -R

& T

T E

D ir

e c ti

v e

E

N 3

0 0

3 2

8 V

1 .7

.1 (2

0 0

6 -1

0 )

E

N 3

0 0

4 4

0 -1

V 1

.6 .1

(2 0

1 0

-0 8

)

E

N 3

0 0

4 4

0 -2

V 1

.4 .1

(2 0

1 0

-0 8

)

E

N 3

0 1

5 1

1 V

9 .0

.2 (2

0 0

3 -0

3 )

E

N 3

0 1

9 0

8 -1

V 5

.2 .1

(2 0

1 1

-0 5

)

E

N 3

0 1

9 0

8 -2

V 5

.2 .1

(2 0

1 1

-0 7

)

E

N 3

0 1

8 9

3 V

1 .6

.1 (2

0 1

1 -1

1 )

E

N 3

0 2

5 4

4 -2

V 1

.1 .1

(2 0

0 9

-0 1

)

E

N 3

0 2

6 2

3 V

1 .1

.1 (2

0 0

9 -0

1 )

E

N 5

0 3 6

0 :2

0 0

1

E

N 6

2 4 7

9 :2

0 1

0

E

N 5

0 3 8

5 :2

0 0

2

E

N 6

2 3 1

1 :2

0 0

8

E

N 3

0 1

4 8

9 -1

V 1

.9 .2

(2 0

1 1

-0 9

)

E

N 3

0 1

4 8

9 -3

V 1

.4 .1

(2 0

0 2

-0 8

)

E

N 3

0 1

4 8

9 -4

V 1

.4 .1

(2 0

0 9

-0 5

)

E

N 3

0 1

4 8

9 -7

V 1

.3 .1

(2 0

0 5

-1 1

)

E

N 3

0 1

4 8

9 -9

V 1

.4 .1

(2 0

0 7

-1 1

)

E

N 3

0 1

4 8

9 -1

7 V

2 .2

.1 (2

0 1

2 -0

9 )

E

N 3

0 1

4 8

9 -2

4 V

1 .5

.1 (2

0 1

0 -0

9 )

E

N 3

0 2

3 2

6 -2

V 1

.2 .2

(2 0

0 7

-0 6

)

E

N 3

0 2

3 2

6 -3

V 1

.3 .1

(2 0

0 7

-0 9

)

E

N 3

0 1

3 5

7 -2

V 1

.4 .1

(2 0

0 8

-1 1

)

E

N 3

0 2

2 9

1 -1

V 1

.1 .1

(2 0

0 5

-0 7

)

E

N 3

0 2

2 9

1 -2

V 1

.1 .1

(2 0

0 5

-0 7

)

2 0 0 6

/9 5 /E

C -L

V D

D ir

e c ti

v e

E

N 6

0 9 5

0 -1

/ A

1 2 :2

0 1 1

E

N 6

0 0 6

5 :2

0 0

2 / A

1 2

:2 0

1 1

2 0 0 9

/1 2

5 /E

C -E

rP D

ir e c ti

v e

R

e g

u la

ti o

n (

E C

) N

o . 1

2 7 5

/2 0 0

8

R

e g

u la

ti o

n (

E C

) N

o . 6

4 2 /2

0 0 9

R

e g

u la

ti o

n (

E C

) N

o . 2

7 8 /2

0 0 9

R

e g

u la

ti o

n (

E C

) N

o . 6

1 7 /2

0 1 3

2 0 1 1 /6

5 /E

U -R

o H

S D

ir e

c ti

v e

V

e r.

1 3 0 8 1 6

C E

m a

rk in

g

D e

c la

ra ti

o n

D a

te :

2 6 /0

2 /2

0 1

4

Y e

a r

to b

e g

in a

ff ix

in g

C E

m a

rk in

g :2

0 1 4

P o

s it io

n : C

E O

N a

m e

:

J e

rr y S

h e

n

S ig

n a

tu re

: _

_ _ _ </

Manualsnet FAQs

If you want to find out how the A58M-E ASUS works, you can view and download the ASUS A58M-E Motherboard User Manual on the Manualsnet website.

Yes, we have the User Manual for ASUS A58M-E as well as other ASUS manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a ASUS A58M-E. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the ASUS A58M-E Motherboard User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This ASUS A58M-E Motherboard User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download ASUS A58M-E Motherboard User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print ASUS A58M-E Motherboard User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the ASUS A58M-E Motherboard User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.