ASUS BE209TLB Monitor User Manual PDF

Pages 49
Year 2015
Language(s)
English en
1 of 49
1 of 49

Summary of Content for ASUS BE209TLB Monitor User Manual PDF

Page 3

iii

Contents

Contents ... iii Notices ... iv Safety information ... vii Care & Cleaning ... viii Takeback Services ... ix

Chapter 1: Product introduction

1... 1 Welcome! ... 1-1 1... 2 Package contents ... 1-1 1... 3 Monitor introduction ... 1-2

1... 3... 1 Front view ... 1-2 1... 3... 2 Back view ... 1-4 1... 3... 3 QuickFit Function ... 1-6

Chapter 2: Setup

2... 1 Assembling the monitor arm/base ... 2-1 2... 2 Detaching the arm/base (for VESA wall mount) ... 2-2 2... 3 Attaching/Removing the MiniPC Kit (BE209/BE229/BE239/ BE249/BE24A/BE24W/BE27A height adjustment base) ... 2-3 2... 4 Adjusting the monitor ... 2-4 2... 5 Connecting the cables ... 2-5 2... 6 Turning on the monitor ... 2-6

Chapter 3: General instructions

3... 1 OSD (On-Screen Display) menu ... 3-1 3... 1... 1 How to reconfigure ... 3-1 3... 1... 2 OSD function introduction ... 3-2

3... 2 Specifications summary ... 3-10 3... 3 Troubleshooting (FAQ) ... 3-19 3... 4 Supported operating modes ... 3-20

Page 4

iv

Notices Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules... Operation is subject to the following two conditions:

This device may not cause harmful interference, and This device must accept any interference received including interference that

may cause undesired operation...

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules... These limits are designed to provide reasonable protection against harmful interference in a residential installation... This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications... However, there is no guarantee that interference will not occur in a particular installation... If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna... Increase the separation between the equipment and receiver... Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected... Consult the dealer or an experienced radio/TV technician for help...

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations... Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate this equipment...

ENERGY STAR complied product ENERGY STAR is a joint program of the U... S... Environmental Protection Agency and the U... S... Department of Energy helping us all save money and protect the environment through energy efficient products and practices...

All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default... The monitor and computer are automatically set to sleep after 10 and 30 minutes of user inactivity... To wake your computer, click the mouse or press any key on the keyboard... Please visit http://www... energystar... gov/powermanagement for detail information on power management and its benefits to the environment... In addition, please visit http://www... energystar... gov for detail information on the ENERGY STAR joint program...

Page 5

v

NOTE: Energy Star is NOT supported on FreeDOS and Linux-based operating system...

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications...

This class B digital apparatus complies with Canadian ICES-003...

This Class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment Regulations...

Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouiller du Canada...

Page 6

vi

A third-party certification according to ISO 14024

Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle... Human rights violations are common in the factories... Harmful substances are used both in products and their manufacture... Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded...

This product is a better choice... It meets all the criteria in TCO Certified, the worlds most comprehensive sustainability certification for IT products... Thank you for making a responsible product choice, that help drive progress towards a more sustainable future!

Criteria in TCO Certified have a life-cycle perspective and balance environmental and social responsibility... Conformity is verified by independent and approved verifiers that specialize in IT products, social responsibility or other sustainability issues... Verification is done both before and after the certificate is issued, covering the entire validity period... The process also includes ensuring that corrective actions are implemented in all cases of factory non-conformities... And last but not least, to make sure that the certification and independent verification is accurate, both TCO Certified and the verifiers are reviewed regularly...

Want to know more? Read information about TCO Certified, full criteria documents, news and updates at tcocertified... com... On the website youll also find our Product Finder, which presents a complete, searchable listing of certified products...

Toward sustainable IT products

Page 7

vii

A third-party certification according to ISO 14024

Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle... Human rights violations are common in the factories... Harmful substances are used both in products and their manufacture... Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded...

This product is a better choice... It meets all the criteria in TCO Certified, the worlds most comprehensive sustainability certification for IT products... Thank you for making a responsible product choice, that help drive progress towards a more sustainable future!

Criteria in TCO Certified have a life-cycle perspective and balance environmental and social responsibility... Conformity is verified by independent and approved verifiers that specialize in IT products, social responsibility or other sustainability issues... Verification is done both before and after the certificate is issued, covering the entire validity period... The process also includes ensuring that corrective actions are implemented in all cases of factory non-conformities... And last but not least, to make sure that the certification and independent verification is accurate, both TCO Certified and the verifiers are reviewed regularly...

Want to know more? Read information about TCO Certified, full criteria documents, news and updates at tcocertified... com... On the website youll also find our Product Finder, which presents a complete, searchable listing of certified products...

Toward sustainable IT products

Safety information Before setting up the monitor, carefully read all the documentation that came

with the package... To prevent fire or shock hazard, never expose the monitor to rain or moisture... Never try to open the monitor cabinet... The dangerous high voltages inside the

monitor may result in serious physical injury... If the power supply is broken, do not try to fix it by yourself... Contact a qualified

service technician or your retailer... Before using the product, make sure all cables are correctly connected and the

power cables are not damaged... If you detect any damage, contact your dealer immediately...

Slots and openings on the back or top of the cabinet are provided for ventilation... Do not block these slots... Never place this product near or over a radiator or heat source unless proper ventilation is provided...

The monitor should be operated only from the type of power source indicated on the label... If you are not sure of the type of power supply to your home, consult your dealer or local power company...

Use the appropriate power plug which complies with your local power standard... Do not overload power strips and extention cords... Overloading can result in fire

or electric shock... Avoid dust, humidity, and temperature extremes... Do not place the monitor in

any area where it may become wet... Place the monitor on a stable surface... Unplug the unit during a lightning storm or if it will not be used for a long period

of time... This will protect the monitor from damage due to power surges... Never push objects or spill liquid of any kind into the slots on the monitor

cabinet... To ensure satisfactory operation, use the monitor only with UL listed

computers which have appropriate configured receptacles marked between 100-240V AC...

If you encounter technical problems with the monitor, contact a qualified service technician or your retailer...

Adjustment of the volume control as well as the equalizer to other settings than the center position may increase the ear-/headphones output voltage and therefore the sound pressure level...

This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste... Please check local regulations for disposal of electronic products...

AEEE ynetmeliine uygundur

Page 8

viii

Care & Cleaning Before you lift or reposition your monitor, it is better to disconnect the cables

and power cord... Follow the correct lifting techniques when positioning the monitor... When lifting or carrying the monitor, grasp the edges of the monitor... Do not lift the display by the stand or the cord...

Cleaning... Turn your monitor off and unplug the power cord... Clean the monitor surface with a lint-free, non-abrasive cloth... Stubborn stains may be removed with a cloth dampened with mild cleaner...

Avoid using a cleaner containing alcohol or acetone... Use a cleaner intended for use with the monitor... Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock...

The following symptoms are normal with the monitor: You may find slightly uneven brightness on the screen depending on the

desktop pattern you use... When the same image is displayed for hours, an afterimage of the previous

screen may remain after switching the image... The screen will recover slowly or you can turn off the Power Switch for hours...

When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it... Do not repair the screen by yourself!

Conventions used in this guide WARNING: Information to prevent injury to yourself when trying to complete a task... CAUTION: Information to prevent damage to the components when trying to complete a task... IMPORTANT: Information that you MUST follow to complete a task...

NOTE: Tips and additional information to aid in completing a task...

Page 9

ix

Where to find more information Refer to the following sources for additional information and for product and software updates...

1... ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products... Refer to http://www... asus... com

2... Optional documentation Your product package may include optional documentation that may have been added by your dealer... These documents are not part of the standard package...

Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment... We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries and other components as well as the packaging materials...

Please go to http://csr... asus... com/english/Takeback... htm for detail recycling information in different region...

Product information for EU energy label

Page 10

x

Page 11

1-1ASUS BE Series LCD Monitor

1... 1 Welcome! Thank you for purchasing the ASUS LCD monitor!

The latest widescreen LCD monitor from ASUS provides a broader, brighter and crystal-clear display, plus a host of features that enhance your viewing experience...

With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you!

1... 2 Package contents Check your package for the following items:

LCD monitor

Monitor base

Quick start guide

Warranty card

Power cord

DVI cable (for selected models)

HDMI cable (for selected models)

DisplayPort cable (for selected models)

DisplayPort cable (Mini-DP to DP) (for selected models)

VGA cable (for selected models)

USB cable (for selected models)

Audio cable

MiniPC Kit (for selected models)

If any of the above items is damaged or missing, contact your retailer immediately...

Page 12

1-2 Chapter 1: Product introduction

1... 3 Monitor introduction 1... 3... 1 Front view

Menu

Close

Quick Fit

Brightness

Blue Light Filter

Menu

Close

Quick Fit

Brightness

Blue Light Filter

7

123456

BE229/BE239/BE249 simple base BE209/BE229/BE239/BE249/BE24A/ BE24W/BE27A height adjustment base

1... Power button/power indicator Turns the monitor on/off... The color definition of the power indicator is as the below table...

Status Description White On Amber Standby mode Off Off

2... Menu button: Press this button to display the OSD menu when the OSD is off... Enters the OSD menu... Toggles the Key Lock function between on and off with a long press for

5 seconds...

3... Close button: Press this button to display the OSD menu when the OSD is off... Exits the OSD menu...

4... QuickFit button: Press this button to display the OSD menu when the OSD is off... This is a hotkey to activate the QuickFit function designed for alignment...

Page 13

1-3ASUS BE Series LCD Monitor

The QuickFit function contains pages of common grid patterns, paper sizes, and photo sizes... (Please refer to 1... 3... 3 QuickFit Function)...

5... Shortcut Press this button to display the OSD menu when the OSD is off... Default: Brightness hotkey To change the hotkey function, go to the Shortcut > Shortcut 1 menu...

6... Shortcut Press this button to display the OSD menu when the OSD is off... Default: Blue light filter hotkey To change the hotkey function, go to the Shortcut > Shortcut 2 menu...

7... Human Sensor (only for BE239QLBR): Detects users presence in front of the monitor screen... The monitor

automatically enters standby mode when no moving object in front of the monitor is detected for longer than 60 seconds... When the user comes back, the power resumes automatically when it detects the users presence... The default setting of Human sensor is Off... User can activate this function through OSD settings...

Page 14

1-4 Chapter 1: Product introduction

1... 3... 2 Back view

BE229QB/BE239QB/ BE249QB

10 1 2 3 4 5 6 7 8 9

BE229Q/BE239Q/BE249Q

1 2 3 4 5 6 7 8

BE229QBH

BE229QH

10

1 2 3 4 57 8 11 6 9

1 2 3 4 57 8 11 6

BE209TLB

10 1 2 3 5 6 7 9

BE209QLB/BE229QLB/ BE239QLB/BE239QLBR/ BE249QLB/BE24AQLB

10 1 2 3 4 5 6 7 8 9

BE209TL

1 2 3 5 6 7

BE209QL/BE229QL/ BE239QL/BE249QL

1 2 3 4 5 6 7 8

Page 15

1-5ASUS BE Series LCD Monitor

BE27AQLB

10

10

1 2 3 45 7 8 911 1012

BE229QLBH/BE239QLBH/ BE249QLBH/BE24AQLBH

1 2 3 4 57 8 11 6 9

BE24WQLB/BE24WQSB

10 1 2 3 47 8 11 6 9 10

1... Kensington lock slot... 2... Power switch... Press the switch to turn on/off power... 3... AC-IN port... This port connects the power cord... 4... DisplayPort in... This port is for connection with a DisplayPort compatible

device...

5... DVI port... This 24-pin port is for PC (Personal Computer) DVI-D digital signal connection...

6... VGA port... This 15-pin port is for PC VGA connection... 7... Audio-in port... This port connects PC audio source by the bundled audio

cable... 8... Earphone jack... This port is only available when an HDMI/DisplayPort cable

is connected... 9... USB 3... 2 Gen 1 Type-B... This port is for connection with a USB upstream

cable... The connection enables the USB ports on the monitor... 10... USB 3... 2 Gen 1 Type-A... These ports are for connection with USB devices,

such as USB keyboard/mouse, USB flash drive, etc... 11... HDMI port... This port is for connection with an HDMI compatible device... 12... Mini DisplayPort in... This port is for connection with a Mini DisplayPort

compatible device...

Page 16

1-6 Chapter 1: Product introduction

1... 3... 3 QuickFit Function The QuickFit function contains three kinds of patterns: (1) Grid patterns (2) Paper size (3) Photo size... To activate the patterns, press the QuickFit button... Press the buttons as indicated on the screen to select a desired pattern...

Some of the following patterns may not be available... Please refer to the actual patterns shown on your monitor...

1... Grid patterns The grid patterns facilitate users to efficiently organize and compare various contents, such as spreadsheet viewing and photo editing...

Alignment Grid 1 Alignment Grid 2

Alignment Grid 1 Alignment Grid 2

2... Paper size QuickFit provides several commonly used standard paper sizes for users to view their documents in real size on the screen...

A4 B5

A4 B5

Letter

Letter

Page 17

1-7ASUS BE Series LCD Monitor

3... Photo size The various real photo sizes displayed in the QuickFit function provides photographers and other users to accurately view and edit their photos in real size on the screen...

Photo 4x6, 3x5, 2x2 Photo 8x10, 5x7

3x5 2x24x6 5x78x10

Page 18

1-8 Chapter 1: Product introduction

Page 19

2-1ASUS BE Series LCD Monitor

2... 1 Assembling the monitor arm/base To assemble the monitor base:

1... Have the front of the monitor face down on a table... 2... Attach the base into the arm, making sure the tab on the arm fits into the

groove on the base... 3... Fix the base to the arm by fastening the bundled screw...

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor...

BE229/BE239/BE249 simple base

BE209/BE229/BE239/BE249/BE24A/BE24W/BE27A height adjustment base

(only for BE24WQSB)

180

1

2

Page 20

2-2 Chapter 2: Setup

2... 2 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this monitor is specially designed for VESA wall mount...

To detach the arm/base:

BE229/BE239/BE249 simple base 1... Have the front of the monitor face down on a table... 2... Remove the rubbers in the four screw holes... (Figure 1) 3... Remove the base (Figure 2)... 4... Use a screwdriver to remove the screw on the hinge (Figure 3), then remove

the hinge...

1

2

(Figure 1) (Figure 2)

1

2

(Figure 3)

Page 21

2-3ASUS BE Series LCD Monitor

BE209/BE229/BE239/BE249/BE24A/BE24W/BE27A height adjustment base

1... Have the front of the monitor face down on a table... 2... Press the release button, and then detach the arm/base from the monitor (Figure

2)... 2

1

(Figure 1) (Figure 2)

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor...

The VESA wall mount kit (100 x 100 mm) is purchased separately...

Use only the UL Listed Wall Mount Bracket with minimum weight/load 22... 7kg (Screw size: M4 x 10 mm)

2... 3 Attaching/Removing the MiniPC Kit (BE209/BE229/BE239/BE249/BE24A/ BE24W/BE27A height adjustment base)

Attaching the MiniPC Kit

2 1

Removing the MiniPC Kit

2 1

Page 22

2-4 Chapter 2: Setup

2... 4 Adjusting the monitor For optimal viewing, we recommend that you look at the full face of the

monitor, then adjust the monitor to the angle that is most comfortable for you... Hold the stand to prevent the monitor from falling when you change its angle... BE229/BE239/BE249 simple base: The recommended adjusting angle is +20

to -5... BE209/BE229/BE239/BE249/BE24A/BE24W height adjustment base: You can

adjust the monitors angle from +35 to -5and it allows 90 swivel adjustment from either left or right... You can also adjust the monitors height within +/- 130 mm...

BE24WQSB height adjustment base: You can adjust the monitors angle from +35 to -5and it allows 180 swivel adjustment from either left or right... You can also adjust the monitors height within +/- 130 mm...

BE27A height adjustment base: You can adjust the monitors angle from +35 to -5and it allows 90 swivel adjustment from either left or right... You can also adjust the monitors height within +/- 150 mm...

(Tilt)

(Swivel) (Height adjustment)

(Tilt)

simple base

-5 ~ +20

height adjustment base height adjustment base

150mm

130mm

(only for BE27A)

-5 ~ +35

height adjustment base

(only for BE24WQSB)

-90 ~ +90

-180 ~ +180

Pivoting the monitor (BE209/BE229/BE239/BE249/BE24A/BE24W/BE27A height adjustment base)

1... Lift the monitor to the highest position...

2... Tilt the monitor to its maximum angle...

3... Pivot the monitor clockwise/counterclockwise to the angle you need...

Page 23

2-5ASUS BE Series LCD Monitor

It is normal that the monitor slightly shakes while you adjust the viewing angle...

2... 5 Connecting the cables Connect the cables as the following instructions:

To connect the power cord: Connect one end of the power cord securely to the monitors AC input port, the other end to a power outlet...

To connect the VGA/DVI/DisplayPort/HDMI/Mini DisplayPort cable: a... Plug one end of the VGA/DVI/DisplayPort/HDMI/Mini DisplayPort cable

to the monitors VGA/DVI/DisplayPort/HDMI/Mini DisplayPort jack... b... Connect the other end of the VGA/DVI/DisplayPort/HDMI/Mini

DisplayPort cable to your computer's VGA/DVI/DisplayPort/HDMI/Mini DisplayPort jack...

c... Tighten the two screws to secure the VGA/DVI connector...

Page 24

2-6 Chapter 2: Setup

To connect the audio cable: connect one end of the audio cable to the monitors Audio-in port, the other end to the computers audio-out port...

To use the earphone: connect the end with plug type to the monitors earphone jack when an HDMI or DisplayPort signal is fed...

To use the USB 2... 0 ports: Take the supplied USB Type-B to Type-A cable, and plug the smaller end (type B) of the USB upstream cable to the monitors USB upstream port, and the larger end (type A) to your computers USB 2... 0 port... Make sure your computer is installed with the lastest Windows 7/Windows 8 operating system... That will enable the USB ports on the monitor to work...

To use the USB 3... 2 Gen 1 ports: Take the supplied USB Type-B to Type-A cable, and plug the smaller end (type B) of the USB upstream cable to the monitors USB upstream port, and the larger end (type A) to your computers USB 3... 2 Gen 1 port... Make sure your computer is installed with the lastest Windows 7/Windows 8... 1/Windows 10 operating system... That will enable the USB ports on the monitor to work...

When these cables are connected, you can choose the desired signal from the Input Select item in the OSD menu...

2... 6 Turning on the monitor Press the power button ... See page 1-2 for the location of the power button... The power indicator lights up in white to show that the monitor is ON...

Page 25

3-1ASUS BE Series LCD Monitor

3... 1 OSD (On-Screen Display) menu

3... 1... 1 How to reconfigure

Splendid ASUS BE229

Standard Mode VGA 1920 x 1080 @ 60Hz

Scenery Mode

Standard Mode

Theater Mode

Night View Mode

sRGB Mode

Reading Mode

Darkroom Mode

1... Press any button (except the Power button) to display the OSD menu... 2... Press the Menu button to activate the OSD menu... 3... Press the buttons as indicated on the screen to navigate through the

functions... Highlight the desired function and press to activate it... If the function selected has a sub-menu, press and again to navigate through the sub-menu functions... Highlight the desired sub-menu function and press to activate it...

4... Press and to change the settings of the selected function...

5... To exit and save the OSD menu, press or repeatedly until the OSD menu disappears... To adjust other functions, repeat steps 1-4...

Page 26

3-2 Chapter 3: OSD (On-Screen Display) menu

3... 1... 2 OSD function introduction 1... Splendid

This function contains 7~8 sub-functions you can select for your preference... Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode...

Splendid ASUS BE229

Standard Mode VGA 1920 x 1080 @ 60Hz

Scenery Mode

Standard Mode

Theater Mode

Night View Mode

sRGB Mode

Reading Mode

Darkroom Mode

Scenery Mode

Standard Mode

Theater Mode

Game Mode

Night View Mode

sRGB Mode

Reading Mode

Darkroom Mode

Splendid ASUS BE27A

Standard Mode DisplayPort 2560 x 1440 @ 60Hz

Scenery Mode: Best choice for scenery photo display with SplendidPlus Video Enhancement...

Standard Mode: Best choice for document editing with SplendidPlus Video Enhancement...

Standard Mode meets Energy Star requirements...

Theater Mode: Best choice for movies with SplendidPlus Video Enhancement...

Game Mode (only for BE24W/BE27A): Best choice for games playing with SplendidPlus Video Enhancement...

Page 27

3-3ASUS BE Series LCD Monitor

Night View Mode: Best choice for dark-scene games or movies with SplendidPlus Video Enhancement...

sRGB Mode: best choice for viewing photos and graphics from PCs... Reading Mode: This is the best choice for book reading... Darkroom Mode: This is the best choice for a weak ambient light

environment...

In the Standard mode, the following function(s) are not user-configurable: Saturation, Skin Tone, Sharpness, ASCR...

In the sRGB mode, the following function(s) are not user-configurable: Brightness, Contrast, Saturation, Color Temp... , Skin Tone, Sharpness, ASCR...

In the Reading mode, the following function(s) are not user-configurable: Contrast, Saturation, Color Temp... , Skin Tone, Sharpness, ASCR...

2... Blue Light Filter In this function, you can adjust the blue light filter level...

Level 0

Level 1

Level 2

Level 3

Level 4

Blue Light Filter ASUS BE229

Standard Mode VGA 1920 x 1080 @ 60Hz

Level 0: No change... Level 1~4: The higher the level, the less blue light is scattered...

When Blue Light Filter is activated,the default settings of Standard Mode will be automatically imported... Between Level 1 to Level 3, the Brightness function is user-configurable... Level 4 is optimized setting... It is compliance with TUV Low Blue Light Certification... The Brightness function is not user- configurable...

Please refer to the following to alleviate eye strains:

Page 28

3-4 Chapter 3: OSD (On-Screen Display) menu

Users should take some time away from the display if working for long hours... It is advised to take short breaks (at least 5 mins) after around 1 hour of continuous working at the computer... Taking short and frequent breaks is more effective than a single longer break...

To minimize eye strain and dryness in your eyes, users should rest the eye periodically by focusing on objects that are far away...

Eye exercises can help to reduces eye strain... Repeat these exercises often... If eye strain continues please consult a physician... Eye exercises: (1) Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal...

High energy blue light may lead to eye strain and AMD (Age-Related Macular Degeneration)... Blue light Filter to reduce 70% (max... ) harmful blue light to avoiding CVS (Computer Vision Syndrome)...

3... Color Set a desired color setting from this menu...

Brightness

Contrast

Saturat ion

Color Temp...

Skin Tone

Color ASUS BE229

Standard Mode VGA 1920 x 1080 @ 60Hz

Brightness: The adjusting range is from 0 to 100... Contrast: The adjusting range is from 0 to 100... Saturation: The adjusting range is from 0 to 100... Color Temp... : Contains 4 modes including Cool, Normal, Warm and User

Mode... Skin Tone: contains three color modes including Reddish, Natural, and

Yellowish...

Page 29

3-5ASUS BE Series LCD Monitor

4... Image Set the image related setting from this menu...

Sharpness

Trace Free

Aspect Control

Viv idPixel

ASCR

Posit ion

Focus

Auto Adjust

Image ASUS BE229

Standard Mode VGA 1920 x 1080 @ 60Hz

Sharpness: The adjusting range is from 0 to 100... Trace Free: Adjusts the response time of the monitor... Aspect Control: Adjusts the aspect ratio to full, 4:3, 1:1 (optional) or

OverScan (optional)...

4:3 is only available when input source is in 4:3 format... OverScan is only available for the HDMI input source or some typical timings...

VividPixel: Enhances the outline of the displayed picture and generates high-quality images on screen...

ASCR: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function... Position (Only available for VGA input): adjusts the horizontal position

(H-Position) and the vertical position (V-Position) of the image... The adjusting range is from 0 to 100...

Focus (Only available for VGA input): reduces Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately... The adjusting range is from 0 to 100...

Phase adjusts the phase of the pixel clock signal... With a wrong phase adjustment, the screen shows horizontal disturbances...

Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep... If the frequency is not correct, the screen shows vertical stripes and the image is not proportional...

Auto Adjust... : Automatically adjusts the image to its optimized position, clock, and phase (for VGA mode only)...

Page 30

3-6 Chapter 3: OSD (On-Screen Display) menu

5... Sound You can adjust Volume, Mute and Source from this menu...

Volume

Mute

Source

Sound ASUS BE229

Standard Mode VGA 1920 x 1080 @ 60Hz

Volume: the adjusting range is from 0 to 100... Mute: toggles the monitor sound between on and off... Source: decides the monitor sound comes from which source...

6... Input Select In this function, you can select your desired input source...

VGA

DVI

HDMI

DisplayPort

Input Select ASUS BE229

Standard Mode VGA 1920 x 1080 @ 60Hz

DVI

HDMI

DisplayPort

Mini DisplayPort

Input Select ASUS BE27A

Standard Mode DisplayPort 2560 x 1440 @ 60Hz

Page 31

3-7ASUS BE Series LCD Monitor

VGA

DVI

Input Select ASUS BE209TLB

Standard Mode VGA 1920 x 1080 @ 60Hz

7... System Setup Allows you to adjust the system...

Splendid Demo Mode

ECO Mode

USB Charging

OSD Setup

Language

Key Lock

Informat ion

More

System Setup ASUS BE229

Standard Mode VGA 1920 x 1080 @ 60Hz

Splendid Demo Mode: Splits the screen into two for Splendid modes comparison... (Scenery mode only)

ECO Mode: reduces power consumption... USB Charging (only for BE209QLB/BE209TLB/BE229QB/BE229QBH/

BE229QLBH/BE229QLB/BE239QB/BE239QLB/BE239QLBH/ BE239QLBR/BE249QB/BE249QLBH/BE24AQLB/BE24AQLBH/ BE27AQLB):

* On allows the USB downstream ports to generate a 5V/500mA output when the monitor is turned on or in standby mode...

* Off allows the USB downstream ports to generate a 5V/500mA output only when the monitor is turned on...

Page 32

3-8 Chapter 3: OSD (On-Screen Display) menu

USB Charging (only for BE24WQLB/BE24WQSB): * On allows the USB downstream ports to generate a 5V/2A or

5V/900mA output when the monitor is turned on or in standby mode... The table below shows whether the USB downstream ports can be used to charge an external device in different situations...

Downstream port Monitor status When upstream port connected to PC...

When upstream port NOT connected to PC...

port Turned on Allows charging Allows charging Standby Allows charging Allows charging

port Turned on Allows charging Does not allow charging Standby Allows charging Does not allow charging

* Off allows the USB downstream ports to generate a 5V/2A or 5V/900mA output only when the monitor is turned on... The table below shows whether the USB downstream ports can be used to charge an external device in different situations...

Downstream port Monitor status When upstream port connected to PC...

When upstream port NOT connected to PC...

port Turned on Allows charging Allows charging Standby Does not allow charging Does not allow charging

port Turned on Allows charging Does not allow charging Standby Does not allow charging Does not allow charging

OSD Setup: * Adjusts the OSD timeout from 10 to 120 seconds... * Enables or disables the DDC/CI function... * Adjusts the OSD background from opaque to transparent...

Language: There are 21 languages for your selection, including English, French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech, Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian...

Key Lock: To disable all function keys... Press the second button from the right over five seconds to cancel the key lock function...

Auto Source Detection (only for BE24WQLB/BE24WQSB/ BE27AQLB): Enables or disables the auto source detecting function...

Information: Shows the monitor information... Power Indicator: Turns the power LED indicator on/off... Human Sensor (only for BE239QLBR): turns on/ off the Human Sensor

function and adjusts its sensitivity... The effective range is from 50 to 70 cm... The default setting is Off...

* Low: Sensor distance is around 50 cm... * Medium: Sensor distance is around 60 cm... * High: Sensor distance is around 70 cm...

Page 33

3-9ASUS BE Series LCD Monitor

The detective range may be slightly different if user wears dark or bright colored clothing... Set the sensitivity to High when wearing black or other dark clothes...

Please do not put any object too close to the Human Sensor to avoid any interference...

Power Key Lock: Enables or disables the power key... All Reset: Yes allows you to restore the default settings...

8... Shortcut Defines the functions for Shortcut 1 and 2 buttons...

Shortcut 1

Shortcut 2

Shortcut ASUS BE229

Standard Mode VGA 1920 x 1080 @ 60Hz

Shortcut 1/Shortcut 2: selects a function for Shortcut 1 and 2 buttons...

When a certain function is selected or activated, your shortcut key may not support... Available function choices for shortcut: Blue Light Filter, Splendid, Brightness, Auto Adjust, Contrast, Color Temp... , Volume...

Page 34

3-10 Chapter 3: OSD (On-Screen Display) menu

3... 2 Specifications summary BE229/BE239/BE249 simple base Panel Type TFT LCD Panel size BE229QB/BE229Q/BE229QBH/BE229QH: 21... 5

(16:9, 54... 6 cm) wide screen BE239QB/BE239Q: 23 (16:9, 58... 4 cm) wide screen BE249QB/BE249Q: 23... 8 (16:9, 60... 5 cm) wide screen

Max... Resolution BE229QB/BE229Q/BE229QBH/BE229QH: 1920 x 1080 BE239QB/BE239Q: 1920 x 1080 BE249QB/BE249Q: 1920 x 1080

Pixel pitch BE229QB/BE229Q/BE229QBH/BE229QH: 0... 248 mm x 0... 248 mm BE239QB/BE239Q: 0... 2652 mm x 0... 2652 mm BE249QB/BE249Q: 0... 2745 mm x 0... 2745 mm

Brightness (Typ... ) 250 cd/m2

Contrast Ratio (Typ... ) 1000:1 Contrast Ratio (Max... ) 100,000,000:1 (with ASCR on) Viewing angle (H/V) CR>10 178/178 Display colors 16... 7 M Response time < 5 ms SplendidPlus Video Enhancement Yes SplendidPlus selection 7 video preset modes Auto adjustment Yes Color temperature selection 4 color temperatures Analog input D-sub Digital input DVI-D with HDCP, DisplayPort v1... 2, HDMI (only for

BE229QBH/BE229QH) Earphone jack Yes Audio input Yes Speaker (Built-in) 2 W x 2 Stereo, RMS USB 2... 0 port Upstream x 1, Downstream x 2 (only for BE229QB/

BE239QB/BE249QB) USB 3... 2 Gen 1 port 1 x USB 3... 2 Gen 1 Type-B,

2 x USB 3... 2 Gen 1 Type-A (only for BE229QBH) Colors Black Power LED White (On)/Amber (Standby) Tilt +20~ -5 Pivot No Swivel No Height Adjustment No Kensington lock Yes AC input voltage AC: 100~240V

Page 35

3-11ASUS BE Series LCD Monitor

Power consumption BE229QB/BE229Q/BE229QBH/BE229QH: Power On: < 21... 09 W** (Typ... ), Standby: < 0... 5 W (Typ... ), Power Off: 0 W (Switch off) BE239QB/BE239Q: Power On: < 22 W** (Typ... ), Standby: < 0... 5 W (Typ... ), Power Off: 0 W (Switch off) BE249QB/BE249Q: Power On: < 22... 97 W** (Typ... ), Standby: < 0... 5 W (Typ... ), Power Off: 0 W (Switch off)

Temperature (Operating) 0C~40C

Temperature (Non-operating) -20C~+60C

Dimension (W x H x D) with stand

BE229QB/BE229Q/BE229QBH/BE229QH: 514 x 383 x 195 mm (machine), 576 x 442 x 120 mm (package) BE239QB/BE239Q: 548 x 403 x 195 mm (machine), 617 x 119 x 462 mm (package) BE249QB/BE249Q: 562 x 406 x 195 mm (machine), 632 x 127 x 465 mm (package)

Weight (Esti... ) BE229QB/BE229Q/BE229QBH/BE229QH: 3... 8 kg (Net); 5... 3 kg (Gross) BE239QB/BE239Q: 4... 3 kg (Net); 5... 7 kg (Gross) BE249QB/BE249Q: 4... 3 kg (Net); 5... 9 kg (Gross)

Multi-languages 21 languages (English, French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech, Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian)

Accessories Power cord, DVI cable (optional), DisplayPort cable, VGA cable, Audio cable, USB cable (only for BE229QB/BE229QBH/BE239QB/BE249QB), Quick start guide, Warranty card

Compliance and Standards UL/cUL, CB, CE, ErP, FCC, ISO9241-307, RCM, VCCI, RoHS, Windows 7 & 8 WHQL, Energy Star, Flicker Free, Low blue Light, TUV-GS, TUV-Ergo, CU, PSE, WEEE, EMC DoC, UkrSEPRO, MEPS, NFPA99

*Specifications are subject to change without notice... **measuring a screen brightness of 200 nits without audio/USB/Card reader connection...

Page 36

3-12 Chapter 3: OSD (On-Screen Display) menu

BE209/BE229/BE239/BE249/BE24A/BE24W height adjustment base Panel Type TFT LCD Panel size BE209QLB/BE209QL: 19... 45" (16:10, 49... 4 cm) wide

screen BE229QLB/BE229QL/BE229QLBH: 21... 5 (16:9, 54... 6 cm) wide screen BE239QLB/BE239QL/BE239QLBR/BE239QLBH: 23 (16:9, 58... 4 cm) wide screen BE249QLB/BE249QL/BE249QLBH: 23... 8 (16:9, 60... 5 cm) wide screen BE24AQLB/BE24AQLBH/BE24WQLB/BE24WQSB: 24 (16:10, 61... 13 cm) wide screen

Max... Resolution BE209QLB/BE209QL: 1440 x 900 BE229QLB/BE229QL/BE229QLBH: 1920 x 1080 BE239QLB/BE239QL/BE239QLBR/BE239QLBH: 1920 x 1080 BE249QLB/BE249QL/BE249QLBH: 1920 x 1080 BE24AQLB/BE24AQLBH/BE24WQLB/BE24WQSB: 1920 x 1200

Pixel pitch BE209QLB/BE209QL: 0... 2907 mm x 0... 2915 mm BE229QLB/BE229QL/BE229QLBH: 0... 248 mm x 0... 248 mm BE239QLB/BE239QL/BE239QLBR/BE239QLBH: 0... 2652 mm x 0... 2652 mm BE249QLB/BE249QL/BE249QLBH: 0... 2745 mm x 0... 2745 mm BE24AQLB/BE24AQLBH/BE24WQLB/BE24WQSB: 0... 270 mm x 0... 270 mm

Brightness (Typ... ) BE209QLB/BE209QL/BE229QLB/BE229QL/ BE229QLBH/BE239QLB/BE239QL/BE239QLBR/ BE239QLBH/BE249QLB/BE249QL/BE249QLBH/ BE24AQLB: 250 cd/m2

BE24AQLBH/BE24WQLB/BE24WQSB: 300 cd/m2

Contrast Ratio (Typ... ) 1000:1 Contrast Ratio (Max... ) 100,000,000:1 (with ASCR on) Viewing angle (H/V) CR>10 178/178 Display colors 16... 7 M Response time < 5 ms SplendidPlus Video Enhancement Yes SplendidPlus selection 7~8 video preset modes Auto adjustment Yes Color temperature selection 4 color temperatures Analog input D-sub Digital input DVI-D with HDCP, DisplayPort v1... 2, HDMI (only for

BE229QLBH/BE239QLBH/BE249QLBH/BE24AQLBH) Earphone jack Yes Audio input Yes

Page 37

3-13ASUS BE Series LCD Monitor

Speaker (Built-in) 2 W x 2 Stereo, RMS USB 2... 0 port BE209QLB/BE229QLB/BE239QLB/BE239QLBR/

BE249QLB/BE24AQLB: Upstream x 1, Downstream x 2 USB 3... 2 Gen 1 port BE229QLBH/BE239QLBH/BE249QLBH/

BE24AQLBH: 1 x USB 3... 2 Gen 1 Type-B, 2 x USB 3... 2 Gen 1 Type-A BE24WQLB/BE24WQSB: 1 x USB 3... 2 Gen 1 Type-B, 4 x USB 3... 2 Gen 1 Type-A

Colors Black/Gray Power LED White (On)/Amber (Standby) Tilt +35~ -5 Pivot +90~ -90 Swivel +90~ -90

Only for BE24WQSB: +180~ -180 Height Adjustment 130 mm Kensington lock Yes AC input voltage AC: 100~240V Power consumption BE209QLB/BE209QL: Power On: < 15... 74 W** (Typ... ),

Standby: < 0... 5 W (Typ... ), Power Off: 0 W (Switch off) BE229QLB/BE229QL/BE229QLBH: Power On: < 21... 09 W** (Typ... ), Standby: < 0... 5 W (Typ... ), Power Off: 0 W (Switch off) BE239QLB/BE239QL/BE239QLBR/BE239QLBH: Power On: < 22 W** (Typ... ), Standby: < 0... 5 W (Typ... ), Power Off: 0 W (Switch off) BE249QLB/BE249QL/BE249QLBH: Power On: < 22... 97 W** (Typ... ), Standby: < 0... 5 W (Typ... ), Power Off: 0 W (Switch off) BE24AQLB/BE24AQLBH: Power On: < 25... 4 W** (Typ... ), Standby: < 0... 5 W (Typ... ), Power Off: 0 W (Switch off) BE24WQLB/BE24WQSB: Power On: < 13... 3 W** (Typ... ), Standby: < 0... 22 W (Typ... ), Power Off: 0 W (Switch off)

Temperature (Operating) 0C~40C

Temperature (Non-operating) -20C~+60C

Page 38

3-14 Chapter 3: OSD (On-Screen Display) menu

Dimension (W x H x D) with stand

BE209QLB/BE209QL: 459 x 477 x 211 mm (highest), 459 x 347 x 211 mm (lowest), 621 x 173 x 382 mm (package) BE229QLB/BE229QL/BE229QLBH: 514 x 477 x 211 mm (highest), 514 x 347 x 211 mm (lowest), 643 x 378 x 190 mm (package) BE239QLB/BE239QL/BE239QLBR/BE239QLBH: 548 x 490 x 211 mm (highest), 548 x 360 x 211 mm (lowest), 652 x 173 x 403 mm (package) BE249QLB/BE249QL/BE249QLBH: 562 x 492 x 211 mm (highest), 562 x 362 x 211 mm (lowest), 660 x 180 x 420 mm (package) BE24AQLB/BE24AQLBH: 561 x 511 x 211 mm (highest), 561 x 381 x 211 mm (lowest), 662 x 179 x 454 mm (package) BE24WQLB/BE24WQSB: 533 x 505 x 211 mm (highest), 533 x 375 x 211 mm (lowest), 649 x 192 x 474 mm (package)

Weight (Esti... ) BE209QLB/BE209QL: 4... 8 kg (Net); 6... 4 kg (Gross) BE229QLB/BE229QL/BE229QLBH: 5... 7 kg (Net); 7... 2 kg (Gross) BE239QLB/BE239QL/BE239QLBR/BE239QLBH: 5... 7 kg (Net); 7... 3 kg (Gross) BE249QLB/BE249QL/BE249QLBH: 5... 8 kg (Net); 7... 9 kg (Gross) BE24AQLB/BE24AQLBH: 6... 2 kg (Net); 8... 2 kg (Gross) BE24WQLB/BE24WQSB: 6... 1 kg (Net); 3... 9 kg (without stand); 8... 3 kg (Gross)

Multi-languages 21 languages (English, French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech, Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian)

Accessories Power cord, DVI cable (optional), HDMI cable (optional), DisplayPort cable (optional), VGA cable (optional), Audio cable (optional), USB cable (only for BE209QLB/BE229QLB/BE239QLB/BE239QLBR/ BE249QLB/BE24AQLB/BE24WQLB/BE24WQSB), Quick start guide, Warranty card, MiniPC Kit (optional)

Compliance and Standards UL/cUL, CB, CE, ErP, FCC, ISO9241-307, RCM, VCCI, RoHS, Windows 7 & 8 & 10 WHQL, Energy Star, Flicker Free, Low blue Light, TUV-GS, TUV-Ergo, CU, PSE, WEEE, EMC DoC, UkrSEPRO, MEPS, BSMI, NFPA99

Only for BE24WQLB/BE24WQSB: CCC, CEL, PC Recycle, J-MOSS, KC, KCC, e-Standby, TCO 8... 0, ICE-3

*Specifications are subject to change without notice... **Measuring a screen brightness of 200 nits without audio/USB/Card reader connection...

Page 39

3-15ASUS BE Series LCD Monitor

BE27A Panel Type TFT LCD Panel size 27 (16:9, 68... 47 cm) wide screen

Max... Resolution 2560 x 1440 Pixel pitch 0... 2331 mm x 0... 2331 mm Brightness (Typ... ) 350 cd/m2

Contrast Ratio (Typ... ) 1000:1 Contrast Ratio (Max... ) 100,000,000:1 (with ASCR on) Viewing angle (H/V) CR>10 178/178 Display colors 16... 7 M Response time < 5 ms SplendidPlus Video Enhancement Yes SplendidPlus selection 8 video preset modes Auto adjustment Yes Color temperature selection 4 color temperatures Analog input No Digital input DVI-D with HDCP, DisplayPort v1... 2, HDMI, mini

DisplayPort Earphone jack Yes Audio input Yes Speaker (Built-in) 2 W x 2 Stereo, RMS USB 3... 2 Gen 1 port 1 x USB 3... 2 Gen 1 Type-B,

4 x USB 3... 2 Gen 1 Type-A Colors Black Power LED White (On)/Amber (Standby) Tilt +35~ -5 Pivot +90~ -90 Swivel +90~ -90 Height Adjustment 150 mm Kensington lock Yes AC input voltage AC: 100~240V Power consumption Power On: < 20... 3 W** (Typ... ), Standby: < 0... 5 W

(Typ... ), Power Off: 0 W (Switch off) Temperature (Operating) 0C~40C

Temperature (Non-operating) -20C~+60C

Dimension (W x H x D) without stand

615 x 372 x 51 mm

Dimension (W x H x D) with stand

615 x 532 x 226 mm (highest), 615 x 382 x 226 mm (lowest), 735 x 216 x 464 mm (package)

Weight (Esti... ) 7... 7 kg (Net); 5 kg (Without stand); 10... 8 kg (Gross)

Page 40

3-16 Chapter 3: OSD (On-Screen Display) menu

Multi-languages 21 languages (English, French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech, Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian)

Accessories Power cord, DVI cable (optional), HDMI cable, DisplayPort cable (optional), DisplayPort cable (Mini- DP to DP), Audio cable, USB cable, Quick start guide, Warranty card

Compliance and Standards UL/cUL, FCC, ICES-3, CB, CE, ErP, WEEE, TUV- GS, TUV-Ergo, ISO 9241-307, UkrSEPRO, CU, CCC, CEL, BSMI, RCM, MEPS, VCCI, PSE, PC Recycle, J-MOSS, KC, KCC, e-Standby, Energy Star, RoHs, Windows 7/8... 1/10 WHQL, Flicker Free, Low Blue Light, NFPA99

*Specifications are subject to change without notice... **Measuring a screen brightness of 200 nits without audio/USB/Card reader connection...

Page 41

3-17ASUS BE Series LCD Monitor

BE209TL/BE209TLB Panel Type TFT LCD Panel size 19... 45" (16:10, 49... 4 cm) wide Max... Resolution 1440 x 900 Pixel pitch 0... 2907 mm x 0... 2915 mm Brightness (Typ... ) 250 cd/m2

Contrast Ratio (Typ... ) 1000:1 Contrast Ratio (Max... ) 100,000,000:1 (with ASCR on) Viewing angle (H/V) CR>10 178/178 Display colors 16... 7 M Response time < 5 ms SplendidPlus Video Enhancement Yes SplendidPlus selection 7 video preset modes Auto adjustment Yes Color temperature selection 4 color temperatures Analog input D-sub Digital input DVI-D with HDCP Earphone jack No Audio input Yes Speaker (Built-in) 2 W x 2 Stereo, RMS USB 2... 0 port Upstream x 1, Downstream x 2 (only for BE209TLB) Colors Black Power LED White (On)/Amber (Standby) Tilt +33~ -5 Pivot +90~ -90 Swivel +90~ -90 Height Adjustment 130 mm Kensington lock Yes AC input voltage AC: 100~240V Power consumption Power On: < 15... 74 W** (Typ... ), Standby: < 0... 5 W

(Typ... ), Power Off: 0 W (Switch off) Temperature (Operating) 0C~40C

Temperature (Non-operating) -20C~+60C

Dimension (W x H x D) with stand

459 x 477 x 211 mm (highest), 459 x 347 x 211 mm (lowest), 621 x 173 x 382 mm (package)

Weight (Esti... ) 4... 8 kg (Net); 6... 4 kg (Gross) Multi-languages 21 languages (English, French, German, Italian,

Spanish, Dutch, Portuguese, Russian, Czech, Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian)

Accessories Power cord, DVI cable, VGA cable, Audio cable, USB cable (only for BE209TLB), Quick start guide, Warranty card

Page 42

3-18 Chapter 3: OSD (On-Screen Display) menu

Compliance and Standards UL/cUL, CB, CE, ErP, FCC, ISO9241-307, RCM, VCCI, RoHS, Windows 7 & 8 WHQL, Energy Star, Flicker Free, Low blue Light, TUV-GS, TUV-Ergo, CU, PSE, WEEE, EMC DoC, UkrSEPRO, MEPS, NFPA99

*Specifications are subject to change without notice... **Measuring a screen brightness of 200 nits without audio/USB/Card reader connection...

Page 43

3-19ASUS BE Series LCD Monitor

3... 3 Troubleshooting (FAQ) Problem Possible Solution

Power LED is not ON Press the button to check if the monitor is in the ON mode...

Check if the power cord is properly connected to the monitor and the power outlet...

Check if the power switch is ON... The power LED lights amber and there is no screen image

Check if the monitor and the computer are in the ON mode...

Make sure the signal cable is properly connected the monitor and the computer...

Inspect the signal cable and make sure none of the pins are bent...

Connect the computer with another available monitor to check if the computer is properly working...

Screen image is too light or dark Adjust the Contrast and Brightness settings via OSD...

Screen image is not centered or sized properly

Adjust the H-Position or V-Position settings via OSD...

Screen image bounces or a wave pattern is present in the image

Make sure the signal cable is properly connected to the monitor and the computer...

Move electrical devices that may cause electrical interference...

Screen image has color defects (white does not look white)

Inspect the signal cable and make sure that none of the pins are bent...

Perform All Reset via OSD... Adjust the R/G/B color settings or select

the Color Temperature via OSD... Screen image is blurry or fuzzy Adjust the Phase and Clock settings via

OSD...

No sound or sound is low Ensure that the HDMI/DisplayPort cable is properly connected to the monitor and the computer...

Adjust the volume settings of both your monitor and HDMI/DisplayPort device...

Ensure that the computer sound card driver is properly installed and activated...

Page 44

3-20 Chapter 3: OSD (On-Screen Display) menu

3... 4 Supported operating modes BE209 Resolution Frequency

Horizontal Frequency (KHz)

Vertical Frequency (Hz)

Pixel (MHz)

640x480 31... 47(N) 59... 94(N) 25... 18 640x480 35... 00(N) 66... 66(N) 30... 24 640x480 37... 87(N) 72... 82(N) 31... 5 640x480 37... 5(N) 75... 00(N) 31... 5 720x400 31... 47(N) 70... 08(P) 28... 32 800x600 35... 16(P) 56... 25(P) 36... 00 800x600 37... 88(P) 60... 32(P) 40... 00 800x600 48... 08(P) 72... 12(P) 50... 00 800x600 46... 86(P) 75... 00(P) 49... 50 832X624 49... 72(P/N) 74... 55(P/N) 57... 28 1024x768 48... 36(N) 60... 00(N) 65... 00 1024x768 56... 476(N) 70... 069(N) 75... 00 1024x768 60... 02(N) 75... 00(N) 78... 75 1152x864 67... 5(P/N) 75... 00(P/N) 108 1280x720 45... 00(P) 60... 00(N) 74... 25 1280x768 47... 78(P) 60... 00(N) 79... 5 1280x800 49... 7(P) 60... 00(N) 83... 5 1360x768 47... 712(P) 59... 79(P) 85... 5 1366x768 47... 712(P) 59... 79(P) 85... 5 1440x900 55... 94(N) 59... 89(P) 106... 5

* P, N stands for Positive, Negative polarity of incoming H-sync/V-sync (inpuft timing)... Timing mode : When the monitor is operating in the video mode (ie, not displaying data) using the HDMI connector, the following high definition modes shall be supported in addition to standard definition video...

Preset Timing Name

Pixel Format Horizontal Frequency (kHz)

Vertical Frequency (Hz)

Pixel Rate (MHz)

OSD Display

1 480p 720 x 480 31... 469 60 27 480p-60Hz 2 720p60 1280 x 720 45 60 74... 25 720p-60Hz 3 576p 720 x 576 31... 25 50 27 576p-50Hz 4 720p50 1280 x 720 37... 5 50 74... 25 720p-50Hz

Page 45

3-21ASUS BE Series LCD Monitor

BE229/BE239/BE249 Resolution Frequency

Horizontal Frequency (KHz)

Vertical Frequency (Hz)

Pixel (MHz)

640x480 31... 47(N) 59... 94(N) 25... 18 640x480 35... 00(N) 66... 66(N) 30... 24 640x480 37... 87(N) 72... 82(N) 31... 5 640x480 37... 5(N) 75... 00(N) 31... 5 720x400 31... 47(N) 70... 08(P) 28... 32 800x600 35... 16(P) 56... 25(P) 36... 00 800x600 37... 88(P) 60... 32(P) 40... 00 800x600 48... 08(P) 72... 12(P) 50... 00 800x600 46... 86(P) 75... 00(P) 49... 50 832X624 49... 72(P/N) 74... 55(P/N) 57... 28 1024x768 48... 36(N) 60... 00(N) 65... 00 1024x768 56... 476(N) 70... 069(N) 75... 00 1024x768 60... 02(N) 75... 00(N) 78... 75 1152x864 67... 5(P/N) 75... 00(P/N) 108 1280x720 45... 00(P) 60... 00(N) 74... 25 1280x768 47... 78(P) 60... 00(N) 79... 5 1280x800 49... 7(P) 60... 00(N) 83... 5 1280x960 60... 00(P) 60... 00(N) 108

1280x1024 63... 98(P) 60... 02(N) 108 1280x1024 79... 98(P) 75... 02(N) 135 1360x768 47... 712(P) 59... 79(P) 85... 5 1366x768 47... 712(P) 59... 79(P) 85... 5 1440x900 55... 94(N) 59... 89(P) 106... 5

1600x1200 75... 00(P) 60... 00(P) 162 1680x1050 65... 29(P) 60... 00(P) 146... 25 1920x1080 67... 5(P) 60... 00(P) 148... 5

* P, N stands for Positive, Negative polarity of incoming H-sync/V-sync (inpuft timing)... Timing mode :

Page 46

3-22 Chapter 3: OSD (On-Screen Display) menu

When the monitor is operating in the video mode (ie, not displaying data) using the HDMI connector, the following high definition modes shall be supported in addition to standard definition video...

Preset Timing Name

Pixel Format Horizontal Frequency (kHz)

Vertical Frequency (Hz)

Pixel Rate (MHz)

OSD Display

1 480p 720 x 480 31... 469 60 27 480p-60Hz 2 720p60 1280 x 720 45 60 74... 25 720p-60Hz 3 576p 720 x 576 31... 25 50 27 576p-50Hz 4 720p50 1280 x 720 37... 5 50 74... 25 720p-50Hz 5 1080p60 1920 x 1080 67... 5 60 148... 5 1080p-60Hz 6 1080p50 1920 x 1080 56... 25 50 148... 5 1080p-50Hz

BE24AQLB Resolution Frequency

Horizontal Frequency (KHz)

Vertical Frequency (Hz)

Pixel (MHz)

640x480 31... 47(N) 59... 94(N) 25... 18 800x600 35... 16(P) 56... 25(P) 36 800x600 37... 88(P) 60... 32(P) 40 1024x768 48... 36(N) 60... 00(N) 65 1280x960 60... 00(P) 60... 00(N) 108 1280x1024 63... 98(P) 60... 02(P) 108 1366x768 47... 712(P) 59... 79(P) 85... 5 1440x900 55... 94(N) 59... 89(P) 106... 5 1600x1200 75... 00(P) 60... 00(P) 162 1680x1050 65... 29(N) 60... 00(P) 146... 25

1920x1080 67... 5(P) 60... 00(P) 148... 5 1920x1200 (Reduced Blanking) 74... 038(P) 59... 95(N) 154

* P / N stands for Positive / Negative polarity of incoming H-sync/V-sync (input timing)... * Modes not listed in the table may not be supported... For optimal resolution, we recommend that you choose a mode listed in the table above...

* This monitor supports full HD (480p, 576p, 720p, 1080i/p) video content from game consoles, DVD players and other consumer video devices via HDMI...

When the monitor is operating in the video mode (ie, not displaying data), the following high definition modes shall be supported in addition to standard definition video...

Preset Timing Name

Pixel Format Horizational Frequency (kHz)

Vertical Frequency (Hz)

Pixel Rate (MHz)

OSD Display

1 480p 720 x 480 31... 469 60 27 480p-60Hz 2 720p60 1280 x 720 45 60 74... 25 720p-60Hz 3 576p 720 x 576 31... 25 50 27 576p-50Hz 4 720p50 1280 x 720 37... 5 50 74... 25 720p-50Hz 5 1080p60 1920 x 1080 67... 5 60 148... 5 1080p-60Hz 6 1080p50 1920 x 1080 56... 25 50 148... 5 1080p-50Hz

Page 47

3-23ASUS BE Series LCD Monitor

BE27A Resolution Frequency Horizontal

Frequency (KHz) Vertical Frequency (Hz)

Pixel (MHz)

640x480 31... 47(N) 59... 94(N) 25... 18 640x480 35... 00(N) 66... 66(N) 30... 24 640x480 37... 87(N) 72... 82(N) 31... 5 640x480 37... 5(N) 75... 00(N) 31... 5 720x400 31... 47(N) 70... 08(P) 28... 32 800x600 35... 16(P) 56... 25(P) 36... 00 800x600 37... 88(P) 60... 32(P) 40... 00 800x600 46... 86(P) 75... 00(P) 49... 50

1024x768 48... 36(N) 60... 00(N) 65... 00 1024x768 56... 476(N) 70... 069(N) 75... 00 1024x768 60... 02(N) 75... 00(N) 78... 75 1152x864 67... 5(P/N) 75... 00(P/N) 108 1280x720 45... 00(P) 60... 00(N) 74... 25 1280x768 47... 78(P) 60... 00(N) 79... 5 1280x800 49... 7(P) 60... 00(N) 83... 5 1280x960 60... 00(P) 60... 00(N) 108

1280x1024 63... 98(P) 60... 02(N) 108 1280x1024 79... 98(P) 75... 02(N) 135 1366x768 47... 712(P) 59... 79(P) 85... 5 1440x900 55... 94(N) 59... 89(P) 106... 5

1600x1200 75... 00(P) 60... 00(P) 162 1680x1050 65... 29(P) 60... 00(P) 146... 25 1920x1080 67... 5(P) 60... 00(P) 148... 5 1920x1200

(Reduced Blanking) 74... 038(P) 59... 95(N) 154

1920x1200 74... 556(N) 59... 885(P) 193... 25 2048x1152

(Reduced Blanking) 70... 99(P) 59... 9(N) 156... 75

2560x1080 66... 636(P) 59... 978(N) 181... 25 2560x1440 88... 787(P) 59... 951(N) 241... 5

* P / N stands for Positive / Negative polarity of incoming H-sync/V-sync (input timing)... When the monitor is operating in the video mode (ie, not displaying data), the following high definition modes shall be supported in addition to standard definition video...

Page 48

3-24 Chapter 3: OSD (On-Screen Display) menu

Preset Timing Name

Pixel Format Horizontal Frequency (kHz)

Vertical Frequency (Hz)

Pixel Rate (MHz)

OSD Display

1 480p 720 x 480 31... 469 60 27 480p-60Hz 2 720p60 1280 x 720 45 60 74... 25 720p-60Hz 3 576p 720 x 576 31... 25 50 27 576p-50Hz 4 720p50 1280 x 720 37... 5 50 74... 25 720p-50Hz 5 1080p60 1920 x 1080 67... 5 60 148... 5 1080p-60Hz 6 1080p50 1920 x 1080 56... 25 50 148... 5 1080p-50Hz

BE24W Resolution Frequency Horizontal

Frequency (KHz) Vertical Frequency (Hz)

Pixel (MHz)

640x480 31... 47(N) 59... 94(N) 25... 18 640x480 35... 00(N) 66... 66(N) 30... 24 640x480* 37... 87(N) 72... 82(N) 31... 5 640x480* 37... 5(N) 75... 00(N) 31... 5 720x400* 31... 47(N) 70... 08(P) 28... 32 800x600 35... 16(P) 56... 25(P) 36 800x600 37... 88(P) 60... 32(P) 40 800x600* 46... 86(P) 75... 00(P) 49... 5 1024x768 48... 36(N) 60... 00(N) 65 1024x768 56... 476(N) 70... 069(N) 75 1152x864* 67... 5(P/N) 75... 00(P/N) 108 1280x720 45... 00(P) 60... 00(N) 74... 25 1280x768 47... 78(P) 60... 00(N) 79... 5 1280x800 49... 7(P) 60... 00(N) 83... 5 1280x960 60... 00(P) 60... 00(N) 108

1280x1024 63... 98(P) 60... 02(P) 108 1366x768 47... 712(P) 59... 79(P) 85... 5 1440x900 55... 94(N) 59... 89(P) 106... 5

1600x1200 75... 00(P) 60... 00(P) 162 1680x1050 65... 29(N) 60... 00(P) 146... 25 1920x1080 67... 5(P) 60... 00(P) 148... 5 1920x1200 (Reduced Blanking)"

74... 038(P) 59... 95(N) 154

* P / N stands for Positive / Negative polarity of incoming H-sync/V-sync (input timing)... When the monitor is operating in the video mode (ie, not displaying data), the following high definition modes shall be supported in addition to standard definition video...

Page 49

3-25ASUS BE Series LCD Monitor

Timing Name Pixel Format Horizontal Frequency (kHz)

Vertical Frequency (Hz)

Pixel Rate (MHz)

480p 720 x 480 31... 469 60 27 720p60 1280 x 720 45 60 74... 25 576p 720 x 576 31... 25 50 27 720p50 1280 x 720 37... 5 50 74... 25 1080p60 1920 x 1080 67... 5 60 148... 5 1080p50 1920 x 1080 56... 25 50 148... 5

* These timing are not supported when using OverScan function...

Manualsnet FAQs

If you want to find out how the BE209TLB ASUS works, you can view and download the ASUS BE209TLB Monitor User Manual on the Manualsnet website.

Yes, we have the User Manual for ASUS BE209TLB as well as other ASUS manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a ASUS BE209TLB. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the ASUS BE209TLB Monitor User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This ASUS BE209TLB Monitor User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download ASUS BE209TLB Monitor User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print ASUS BE209TLB Monitor User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the ASUS BE209TLB Monitor User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.