Summary of Content for ASUS SE424-Y LCD Display User Manual PDF
Connecting the VGA input ... 14 Connecting the YPbPr component video input ... 15 Connecting the S-Video input ... 16 Connecting the composite video (AV) input... 17 Connecting the DVI-D digital input... 18 Connecting the HDMI digital input ... 19 Connecting the DisplayPort (DP) digital input... 20 Connecting external speakers ... 21 Connecting multiple displays ... 22
The OSD (On-Screen Display) menu... 35 OSD menu overview ... 35 Operations in the OSD menu... 37 Picture menu ... 38 Sound menu... 39 Screen menu... 40 Setting menu... 42
THIS EQUIPMENT MUST BE GROUNDED To ensure safe operation, the three-pin plug must be inserted only into a standard three-pin power outlet which is effectively grounded through normal household wiring... Extension cords used with the equipment must have three cores and be correctly wired to provide connection to the ground... Wrongly wired extension cords are a major cause of fatalities... The fact that the equipment operates satisfactorily does not imply that the power outlet is grounded or that the installation is completely safe... For your safety, if you are in any doubt about the effective grounding of the power outlet, please consult a qualified electrician...
14... Refer all servicing to qualified service personnel... Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped...
LCD screens, like plasma (PDP) and conventional CRT (Cathode Ray Tube) screens, are also susceptible to 'screen burn-in' or 'image retention' which can be found on the screen as visible fixed lines and shades... To avoid such damage to the screen, avoid displaying still images (like On-Screen Display menus, TV station logos, fixed/inactive text or icons) for more than two hours... Change the aspect ratio from time to time... Fill the entire screen with the image and eliminate the black bars whenever possible... Avoid displaying images in 4:3 aspect ratio over a long period of time, otherwise there may be visible burn marks on the screen as two vertical lines... If display of a still image is required, it is recommended to enable Image Retention under the Setting > Advanced menu...
the correct direction as shown in the battery compartment... Different types of batteries have different characteristics... Do not mix different types... Do not mix old and new batteries... Mixing old and new batteries will shorten battery life or
Notes: The type of power cord supplied may differ from that illustrated depending on your region of purchase... Before discarding the package, check that you haven't left any accessories inside the box... Dispose of packaging materials wisely... You can recycle the cardboard carton... Consider storing the
4... Install the wall mounting bracket on the display and attach the display to the wall according to the mounting brackets instructions... The length of the screw should exceed the thickness of the wall mounting bracket by at least 10 mm... Make sure that all screws are tightened and secured properly... (Recommended torque: 470 - 635Ncm)... The mounting means should be strong enough to bear the weight of the display...
Indicates the operating status of the display: - Lights up green when the power is turned on... - Lights up red when the display is turned off... - Lights up red when the display is in Power Save High
VIDEO IN (YPbPr) Receives component video (YPbPr) signals from an external device (such as a DVD player, HDTV device or Laser disc player)...
USB B (Mini B) Connects to a computer for transferring media content (files) to the displays internal storage...
when the OSD menu is off... Note: The HDMI-2 and SDI functions are not available with this
remote control may not operate properly... In this situation, change the light source, readjust the angle of the display or operate the remote control from a location closer to displays remote control sensor...
Connection Connecting audio/video signals Pay attention to the following notes when you connect cables: Please turn off all devices... Familiarize yourself with the audio/video ports on the display and the devices you want to
jacks on an A/V device (such as a VCR or DVD player) using a component video cable... 2... Connect the A/V devices audio output jacks to the AUDIO IN (AUDIO2) jacks on the
A/V device (such as a VCR or DVD player) using an S-Video cable... 2... Connect the A/V devices audio output jacks to the AUDIO IN (AUDIO2) jacks on the
V device (such as a VCR or DVD player) using a composite video cable... 2... Connect the A/V devices audio output jacks to the AUDIO IN (AUDIO2) jacks on the
3... To view video image from this input, press the DVI button on the remote control, or select DVI from the source selection bar...
Connecting the HDMI digital input 1... Connect the HDMI jack on the display to the HDMI output jack on a Blu-ray disc player
Connecting the DisplayPort (DP) digital input 1... Connect the DP jack on the display to the DisplayPort output jack on a computer using a
Connecting external speakers The built-in amplifier on the display allows you to output audio signals through external speakers... Connect external speakers to the SPEAKERS (R/L) jacks on the display...
Connecting multiple displays You can connect multiple displays serially (daisy chain connection) to a computer for management... The number of displays you can connect serially depends on the resolution of the input signal you use...
Notes: The supplied power cord is suitable for use with 100-240V AC power only... The power cord and outlet illustrated may differ from the ones used in your region... Only use an appropriate power cord for your region... Never use a power cord which appears damaged
Locking/unlocking the controls You can lock/unlock the control panel to prevent unwanted or accidental operations... Control panel buttons To lock/unlock the control panel buttons, press and hold the /- and /+ buttons on the control panel simultaneously for at least 5 seconds... Once locked, the control panel buttons do not function unless unlocked... Remote control functions To lock/unlock the remote control functions, press and hold the MENU and /- buttons on the control panel for at least 5 seconds... Once locked, the display does not respond to any remote control operations unless unlocked... To lock/unlock both the control panel and remote control buttons, press the button for at least 5 seconds, and then the ENTER button on the remote control... Once locked, the control panel and remote control buttons do not function unless unlocked...
- If you are not in a DHCP environment (the IP address of the display has to be configured manually), select Manual > Execute and press the ENTER button on the remote control... Contact your network administrator for information on the IP Address, Subnet Mask, Default Gateway, Primary DNS, and Secondary DNS settings and enter them accordingly using the numeric buttons on the remote control...
Remote network control Once the display is connected via LAN connection, you can access the displays built-in remote network control interface using a computer and the displays IP address... Notes: The computer and display must have the same Subnet Mask, Default Gateway, Primary DNS and
Picture & Sound The Picture & Sound page provides options for picture and sound adjustments... For more information about how to adjust these settings, please refer to "Picture menu" on page 38 and "Sound menu" on page 39...
Schedule The Schedule page provides options for configuring current time and date, and up to 7 schedule settings for the display to turn on and off automatically... For more information about how to set up schedules, please refer to "Schedule" on page 42...
Configuring mail server settings The mail server settings must be correctly configured for the display to send email messages... 1... Specify the recipients and senders email addresses and email subject under Email
[STATUS] Power Status: Power On Video Source: HDMI PAP Enable: Off [Network] IP Address: xx... xx... xx... xx Subnet Mask: xx... xx... xx... xx Gateway: xx... xx... xx... xx Primary DNS: xx... xx... xx... xx Secondary DNS: xx... xx... xx... xx MAC Address: xx:xx:xx:xx:xx:xx
Alert report - thermal error If the displays ambient temperature exceeds 50oC (122oF) for over 30 seconds, a thermal error alert report will be generated and sent to the specified recipient... Below is an example of the format and content of the report...
Alert report - voltage error If a fluctuation in DC power supply to the displays internal components (scaler IC and backlight) occurs, a voltage error alert report will be generated and sent to the specified recipient, and the display will turn off automatically... Below is an example of the format and content of the report...
Network Provides options for manually setting the displays IP address or obtaining an IP address automatically from a DHCP server... For more information about how to configure network settings, please refer to "Connecting the display to a local area network" on page 25...
RS232 commands over the network The display also supports extending access to the RS232 commands over a network connection... Below are the steps to follow for controlling the display over LAN through the RJ45 connector... 1... Connect display & PC to hub or connect display to PC with LAN cable directly... 2... Set display IP address... (See "Connecting the display to a local area network" on page
Image Retention OSD Rotation OSD Info Box Adaptive Contrast Ambient Light Sensor Opening Logo
Notes: Category A functions are only available when the signal is input from VGA IN... Category B functions allow for different settings for each input signal source... Category C functions allow for different settings for each input signal source and signal type (PC or
4... Press or to select a feature and press or to adjust settings...
If Auto is selected, the screen display will be automatically optimized by detecting picture content and applying a reverse 3-2 or 2-2 pull-down process... The picture will be clearer and more natural... Notes: This function is available only with MultiMedia and YPbPr inputs... This function is not available when displaying Picture and Picture (PAP)... This function may not be correctly processed depending on the input signal...
Treble Adjusts the audio treble when Sound Mode is set to Custom... Bass Adjusts the audio bass when Sound Mode is set to Custom... Balance Adjusts the audio balance when Sound Mode is set to Custom... Surround Turns the surround mode on or off...
Picture Size: Changes the size of the sub picture... Picture Position: (PIP only) Changes the position of the sub picture... Notes: PAP is not available for all signal source combinations... See "Supported PAP input
Auto Adjustment: Sets whether to optimize image display for VGA input... Phase: Adjusts the phase of the VGA input image... Clock Frequency: Adjusts the clock frequency of the VGA input image... H... Position: Adjusts the horizontal position of the VGA input image... V... Position: Adjusts the vertical position of the VGA input image...
Sets the display to enter the power saving mode when there is no signal detected... Low: All sources can enter the power saving mode and wake up the display... High: All sources can enter the power saving mode, but only a VGA signal can
Uses the HDMI CEC (Consumer Electronics Control) industry standard protocol to share functionality between connected devices and the display... To transfer system commands, you need to use an HDMI cable to connect the display to a device equipped with HDMI CEC... Select On in this menu and you can operate the main functionalities on your display and the connected device with one remote control...
Viewing multimedia contents You can play audio, video and view photos and document files on an external USB storage device or in the displays built-in storage using the multimedia menu... To change to multimedia input, press the MULTI-MEDIA button on the remote control or select Multi-Media from the video source selection bar... The multimedia menu appears...
Viewing files Viewing files in the displays built-in storage The display is equipped with a 4GB built-in storage... You can transfer files from a computer to the built-in storage and view these files on the display... 1... On the display, enable the USBConnect function in the Settings > System > USBCon-
19MB PowerPoint 97, PowerPoint 2000/2002/2003/2007 (... pptx)/2010 (... pptx), Office X PowerPoint, PowerPoint presentation-2003 and earlier (... ppx), PowerPoint Presentation-2007 and 2010 (... ppsx)
Photo Supported photo files will appear as thumbnails on the screen... You can use the remote control to select and view a photo and perform other additional operations...
to the displays internal storage... Copying of audio, video and document files is not supported... Copying of photos from the displays internal storage to an external USB storage device is also not supported...
Video Supported video files will appear in the list on the screen... You can use the remote control to select and play a video file and perform other additional operations...
Fast forwards the video... Press repeatedly to change the speed at 1X, 2X, 4X or 8X... Note: When fast-forwarding videos in ... rmvb format, slight delay may occur due
Remote control button functions: when the playback controls panel is hidden
Audio Supported audio files will appear in the list on the screen... You can use the remote control to select and play an audio file and perform other additional operations...
No Name Description HOME Goes back to the main page...
Office Viewer You can use the Office Viewer to view PowerPoint, Word, Excel and PDF files... Select the document you want to view and perform the functions as provided on the screen according to your needs...
ENTER Zooms in to the maximum view or zooms out to the minimum view...
Auto Play Mode: You can set the display to automatically play photo, video or audio files... If this function is enabled, the display will play files on the USB flash drive automatically after the drive is connected to the display... To get back to multi-media menu when auto play mode is on, press the following in keys in order: REV, , and ...
Operating Temperature 0oC - 40oC, 32oF - 104oF Operating Humidity 10% - 90% (without condensation) Storage Temperature -20oC - 60oC, 4oF - 140oF Storage Humidity 10% - 95% (without condensation) Display Orientation Landscape/Portrait
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries...
1 OFF 00 0D 2 INPUT 00 0B 3 INFO 00 22 4 ON 00 0C 5 1/VGA 00 01 6 2/DVI 00 02 7 3/DP 00 03 8 4/HDMI-1 00 04 9 5/HDMI-2 00 05 10 6/SDI 00 06 11 7/AV 00 07 12 8/YPbPr 00 08 13 9/MULTI-MEDIA 00 09 14 EXIT 00 28 15 0/MUTE 00 00 16 MENU 00 0F 17 Up 00 20 18 Left/VOL- 00 11 19 ENTER 00 0A 20 Right/VOL+ 00 10 21 Down 00 21 22 HOME 0x41BE 0x0BF4 23 ESC 0x41BE 0x01FE 24 Up 0x41BE 0x0AF5 25 ENTER 0x41BE 0x0FF0 26 Left/Previous 0x41BE 0x13EC 27 Down 0x41BE 0x0CF3 28 Right/Next 0x41BE 0x03FC 29 Reverse 0x41BE 0x15EA 30 Play/Pause 0x41BE 0x10EF 31 Stop 0x41BE 0x07F8 32 Forward 0x41BE 0x05FA
Notes: : supported Blank: not supported
Notes: : supported Blank: not supported
Have you chosen an unsupported output resolution on the DVD or Blu-ray disc player? Refer to "Supported input signal resolution" on page 61 to select a supported resolution and try again...
If you want to find out how the SE424-Y ASUS works, you can view and download the ASUS SE424-Y LCD Display User Manual on the Manualsnet website.
Yes, we have the User Manual for ASUS SE424-Y as well as other ASUS manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The User Manual should include all the details that are needed to use a ASUS SE424-Y. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the ASUS SE424-Y LCD Display User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This ASUS SE424-Y LCD Display User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download ASUS SE424-Y LCD Display User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print ASUS SE424-Y LCD Display User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the ASUS SE424-Y LCD Display User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.