Page 3
NOTE / <> / <REMARQUE> / <NOTA> / <NOTA>
For more details, refer to the user manual included in the support CD...
Pour plus de dtails, consultez le manuel de l'utilisateur contenu dans le CD de support...
Para mais detalhes, consulte o manual do utilizador includo no CD de suporte...
Para obtener ms detalles, consulte el manual del usuario incluido en el CD de soporte...
Page 4
English
A quick look
NOTE: If any of the items is damaged or missing, contact your retailer...
L
Ra a
1
2
3
4
5 6 7 8
1 Earphone 5 MIC 2 LED indicator 6 (Play/Pause) button 3 Power button 7 + (volume up) 4 Micro-USB port 8 - (volume down)
To wear EB50N: 1... Loop the earhooks (a) over your ears... 2... Press the earphones to your earholes...
WARNING: DO NOT use the earphone while charging the device...
Page 5
Button features & LED indicators Status Activities LED Indications
Power on /off Press Power button for two and a half seconds
Blue and red LEDs flash thrice simutaneously
Standby (not connected)
Blue LED flashes once per five seconds
Pairing Press Power button for five seconds
Blue and red LED flash alternatively
Pairing time 150 seconds
Standby (connected) Blue LED flashes twice per five seconds
Charging /Charge finished
Red LED lights up / off
Warning on low voltage (3... 43v ~ 3... 53v)
Red LED flashes twice per five seconds
Play music Blue and red LEDs flash simutaneously once per five seconds
Play/Pause Short press button (< half a second)
Previous song Press "-" for one second twice *
Next song Press "+" for one second
Volume up Short press "+" (< half a second)
Volume down Short press "-" (< half a second)
Coming calls Blue LED flashes quickly (once per 0... 55 second)
En gl
is h
Page 6
English Status Activities LED indications
Call back the last number
Press button for two and a half seconds when connected to the mobile phone
Answer a call Short press button (less than half a second)
Hang up
Reject a call Press button for two and a half seconds
Keep A and switch to B (switch between A and B)
Long press button
Hang up A and answer B**
Short press button
Keep A and reject B** Long press - button for one second
3-party communication***
Press "+" and "-" buttons simutaneously
Button features & LED indicators
* Press for one second to restart the song and another second to return to the previous song...
** A: the current call; B: the second call *** Ensure that your carrier and mobile phone support this func-
tion...
Page 7
En gl
is h
NearField Communication Pairing
NFC area
Items Description Power on / Connection
Lightly touch the NFC area on your device... **
Power off Touch and hold the NFC area till the power off signal*** shows up...
* The NFC connection distance should be less than 3cm... ** Touching the NFC area again will break the existing connection... *** Varies by device's settings...
Multi-point Connection Functions Activities Note
Enable multi-point connection on pairing mode
Short press "+" and "-" simutaneously
(with four rising sounds)
Enable multi-point connection and pair bluetooth devices (mobile phones) respectively
Disable multi-point connection on pairing mode
Long press "+" and "-" simutaneously (three seconds) (with four falling sounds)
Switch between connected phone A and B when they are both on audio-play mode
Short press once The two mobile phones should be on audio-play mode
Page 8
Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules... Operation is subject to the following two conditions:
This device may not cause harmful interference...
This device must accept any interference received, including interference that may cause undesired operation...
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules...
These limits are designed to provide reasonable protection against harmful interference in a residential installation...
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications...
However, there is no guarantee that interference will not occur in a particular installation...
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna...
Increase the separation between the equipment and receiver...
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected...
Consult the dealer or an experienced radio/TV technician for help...
This device complies with part 15 of the FCC Rules...
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation...
CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the users authority to operate the equipment...
Page 9
NCC
Manufacturer ASUSTeK Computer Inc...
Tel: +886-2-2894-3447
Address: No... 150, LI-TE RD... , PEITOU, TAIPEI 112, TAIWAN
Authorised representative in Europe ASUS Computer GmbH
Address: HARKORT STR... 21-23, D-40880 RATINGEN, DEUTSCHLAND
Authorised distributors in Turkey BOGAZICI BIL GISAYAR SAN... VE TIC... A... S...
Tel: +90 212 3311000
Address: AYAZAGA MAH... KEMERBURGAZ CAD... NO... 10 AYAZAGA/ISTANBUL
INDEX BILGISAYAR SISTEMLERI MUHENDISLIK SAN... VE TIC... A... S...
Tel: +90 212 3312121
Address: AYAZAGA MAH... CENDERE YOLU NO... 9 AYAZAGA/ISTANBUL
EEE Ynetmeliine Uygundur...
en
