ASUS A7000-T-64M Graphics Card User Manual PDF

Pages 38
Year 2005
Language(s)
English en
1 of 38
1 of 38

Summary of Content for ASUS A7000-T-64M Graphics Card User Manual PDF

Page 3

i i ii i ii i ii i ii i i

Contents

Notices ... iv

Safety information ... v

About this guide ... vi

1... Support CD information ... 1

2... VGA drivers ... 2

2... 1 Driver installation ... 2

2... 2 Updating the Windows display driver ... 11

2... 3 Removing display driver ... 13

3... Utilities ... 14

3... 1 Utilities installation ... 15

3... 2 Removing installed utilities ... 18

4... Accessories Drivers ... 20

4... 1 Installing Webcam driver ... 20

4... 2 Installing the Gamepad drivers ... 22

4... 3 Removing Webcam driver ... 24

4... 4 Removing the Gamepad drivers ... 25

5... ASUS Contact information ... 26

6... Other information ... 27

6... 1 Browse Support CD ... 27

6... 2 View readme file ... 28

Appendix: Basic troubleshooting ... A-1

Page 4

i vi vi vi vi v

Notices

Federal Communications Commission StatementFederal Communications Commission StatementFederal Communications Commission StatementFederal Communications Commission StatementFederal Communications Commission Statement

This device complies with Part 15 of the FCC Rules... Operation is subject to the following two conditions:

This device may not cause harmful interference, and

This device must accept any interference received including interference that may cause undesired operation...

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules... These limits are designed to provide reasonable protection against harmful interference in a residential installation... This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturers instructions, may cause harmful interference to radio communications... However, there is no guarantee that interference will not occur in a particular installation... If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna...

Increase the separation between the equipment and receiver...

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected...

Consult the dealer or an experienced radio/TV technician for help...

Canadian Department of Communication StatementCanadian Department of Communication StatementCanadian Department of Communication StatementCanadian Department of Communication StatementCanadian Department of Communication Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications...

This class B digital apparatus complies with Canadian ICES-003...

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations... Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate this equipment...

Page 5

vvvvv

Safety information

Electrical safetyElectrical safetyElectrical safetyElectrical safetyElectrical safety

When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected... If possible, disconnect all power cables from the existing system before you add a device...

Make sure that your power supply is set to the correct voltage in your area... If you are not sure about the voltage of the electrical outlet you are using, contact your local power company...

If the power supply is broken, do not try to fix it by yourself... Contact a qualified service technician or your retailer...

Operation safetyOperation safetyOperation safetyOperation safetyOperation safety

Before installing devices on your motherboard, carefully read all the manuals that came with the package...

Before using the product, make sure all cables are correctly connected and the power cables are not damaged... If you detect any damage, contact your dealer immediately...

To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry...

Avoid dust, humidity, and temperature extremes... Do not place the product in any area where it may become wet...

Place the product on a stable surface...

If you encounter technical problems with the product, contact a qualified service technician or your retailer...

Macrovision Corporation Product NoticeMacrovision Corporation Product NoticeMacrovision Corporation Product NoticeMacrovision Corporation Product NoticeMacrovision Corporation Product Notice

This product incorporates copyright protection technology that is protected by method claims of certain U... S... patents and other intellectual property rights owned by Macrovision Corporation and other rights owners... Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation... Reverse engineering or disassembly is prohibited...

Page 6

v iv iv iv iv i

Conventions used in this guideConventions used in this guideConventions used in this guideConventions used in this guideConventions used in this guide

To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual...

Where to find more informationWhere to find more informationWhere to find more informationWhere to find more informationWhere to find more information

Refer to the following sources for additional information and for product and software updates...

1... ASUS Webs itesASUS Webs itesASUS Webs itesASUS Webs itesASUS Webs ites

The ASUS websites worldwide provide updated information on ASUS hardware and software products... The ASUS websites are listed in the ASUS Contact Information on the inside front cover of this installation guide...

2... Opt ional Documentat ionOpt ional Documentat ionOpt ional Documentat ionOpt ional Documentat ionOpt ional Documentat ion

Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer... These documents are not part of the standard package...

About this guide

WARNING: WARNING: WARNING: WARNING: WARNING: Information to prevent injury to yourself when trying to complete a task...

CAUTION:CAUTION:CAUTION:CAUTION:CAUTION: Information to prevent damage to the components when trying to complete a task...

IMPORTANT: IMPORTANT: IMPORTANT: IMPORTANT: IMPORTANT: Information that you MUST follow to complete a task...

NOTE: NOTE: NOTE: NOTE: NOTE: Tips and additional information to aid in completing a task...

Page 7

Software insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ide 11111

1... Support CD information

The support CD that came with the VGA card contains useful software and several utility drivers that enhance the video features...

To begin using the support CD, simply insert the CD into your CD-ROM drive... The support CD automatically displays the 2D/3D Graphics &2D/3D Graphics &2D/3D Graphics &2D/3D Graphics &2D/3D Graphics & Video Accelerator Video Accelerator Video Accelerator Video Accelerator Video Accelerator main menu if autorun is enabled in your computer...

C l i c k t oC l i c k t oC l i c k t oC l i c k t oC l i c k t o d i s p l a y CDd i sp l a y CDd i sp l a y CDd i sp l a y CDd i sp l a y CD i n fo rmat i oni n f o rmat i oni n f o rmat i oni n f o rmat i oni n f o rmat i on

C l i c k a menu i t emC l i c k a menu i t emC l i c k a menu i t emC l i c k a menu i t emC l i c k a menu i t em to open o the rto open o the rto open o the rto open o the rto open o the r i n s ta l l a t i on menusi n s ta l l a t i on menusi n s ta l l a t i on menusi n s ta l l a t i on menusi n s ta l l a t i on menus

If autorun is NOT enabled in your computer, browse the contents of the support CD to locate the file SETUP... EXE... Double-click the SETUP ... EXESETUP ... EXESETUP ... EXESETUP ... EXESETUP ... EXE to run the support CD installation program...

C l i c k to e x i tC l i c k t o e x i tC l i c k t o e x i tC l i c k t o e x i tC l i c k t o e x i t app l i c a t i onapp l i c a t i onapp l i c a t i onapp l i c a t i onapp l i c a t i on

C l i c k to v i ewC l i c k to v i ewC l i c k to v i ewC l i c k to v i ewC l i c k to v i ew readme f i l er eadme f i l er eadme f i l er eadme f i l er eadme f i l e

The screen displays in this manual may not exactly match the display on your screen...

Some driver and utility items in the support CD apply only to specific ASUS VGA card models...

You may need administrator rights to install the drivers and utilities... See your Windows 2000/XP documentation for details...

The contents of the support CD are subject to change at any time without notice... Visit the ASUS website (www... asus... com) for updates...

Page 8

22222 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card22222

2... VGA drivers

A VGA driver is the software program that makes the device work with your operating system... You can install, update or remove the display driver of your graphics card using any of the recommended methods in this section...

If you are replacing an old graphics card with a new ASUS graphics card, make sure to remove the old display driver from your system... Refer to section 2... 3 Removing display drivers for details...

1... From the Found NewFound NewFound NewFound NewFound New Hardware WizardHardware WizardHardware WizardHardware WizardHardware Wizard dialog box, click Cance lCance lCance lCance lCance l to enter the Windows desktop...

2... Insert the support CD into your CD-ROM drive...

3... If autorun is enabled, the 2D/3D Graphics & Video Accelerator appears automatically...

If autorun is disabled, run Setup... exeSetup... exeSetup... exeSetup... exeSetup... exe from the root directory of your support CD...

4... From the 2D/3D Graphics & Video Accelerator main menu, click VGA Dr iversVGA Dr iversVGA Dr iversVGA Dr iversVGA Dr ivers...

The Setup prepares the Install Shield Wizard which will guide you through the program setup process...

After physically installing your graphics card, use any of the recommended methods in this section to install your VGA driver...

2 ... 12... 12... 12... 12... 1 Driver installationDriver installationDriver installationDriver installationDriver installation

To install the VGA driver:

Method 1: Typical installationMethod 1: Typical installationMethod 1: Typical installationMethod 1: Typical installationMethod 1: Typical installation

The Typical installation method installs the most common options... We recommend this method to most users...

Page 9

Software insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ide 33333

5... Click NextNextNextNextNext from the Install Shield Wizard welcome screen...

6... Select Typ ica lTyp ica lTyp ica lTyp ica lTyp ica l then click NextNextNextNextNext...

The wizard copies the necessary files to your computer...

7... The following screen displays the Microsoft DirectX setup... Select I accept theI accept theI accept theI accept theI accept the agreementagreementagreementagreementagreement then click NextNextNextNextNext...

A progress bar on the lower right-hand corner of your screen displays the progress of the driver installation process...

Page 10

44444 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card44444

8... Click NextNextNextNextNext to continue or BackBackBackBackBack to return from previous screen or Cance l Cance l Cance l Cance l Cance l to abort installation...

The Microsoft DirectX setup installs components...

9... The Microsoft DirectX setup notifies you to restart your computer to apply changes... Click F in ish ... F in ish ... F in ish ... F in ish ... F in ish ...

The ASUS VGA installation program will restart your computer after all components are installed into your computer...

The following screen displays the Windows Display Model (WDM) drivers installation process...

Page 11

Software insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ide 55555

10... From the ASUS VGARTD driver installation screen, select Yes ,Yes ,Yes ,Yes ,Yes , insta l l i ts VGARTD dr iverinsta l l i ts VGARTD dr iverinsta l l i ts VGARTD dr iverinsta l l i ts VGARTD dr iverinsta l l i ts VGARTD dr iver then click O KO KO KO KO K...

11... Follow the succeeding screen instructions to install the appropriate VGARTD driver for the chipset on your motherboard...

The final tasks of the setup process is displayed on the progress bar...

12... After the installation is complete, select Yes, I wantYes, I wantYes, I wantYes, I wantYes, I want to restart my computerto restart my computerto restart my computerto restart my computerto restart my computer n o wn o wn o wn o wn o w then click F in i shF in i shF in i shF in i shF in i sh...

Page 12

66666 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card66666

5... Click NextNextNextNextNext from the Install Shield Wizard welcome screen...

Method 2: Custom installationMethod 2: Custom installationMethod 2: Custom installationMethod 2: Custom installationMethod 2: Custom installation

The Custom installation method allows you to select the components you want to install... We recommend this method to advanced users...

1... From the Found NewFound NewFound NewFound NewFound New Hardware WizardHardware WizardHardware WizardHardware WizardHardware Wizard dialog box, click Cance lCance lCance lCance lCance l to enter the Windows desktop...

2... Insert the support CD into your CD-ROM drive...

3... If autorun is enabled, the 2D/3D Graphics & Video Accelerator appears automatically...

If autorun is disabled, run Setup... exeSetup... exeSetup... exeSetup... exeSetup... exe from the root directory of your support CD...

4... From the 2D/3D Graphics & Video Accelerator main menu, click VGA Dr iversVGA Dr iversVGA Dr iversVGA Dr iversVGA Dr ivers...

The Setup prepares the Install Shield Wizard which will guide you through the program setup process...

Page 13

Software insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ide 77777

6... Select Custom Custom Custom Custom Custom then click NextNextNextNextNext...

7... Click the check box of the item you want to install then click NextNextNextNextNext...

Dr iverDr iverDr iverDr iverDr iver

AT I AT I AT I AT I AT I - installs the ATI driver for your graphics card...

ASUSASUSASUSASUSASUS - installs the ASUS Enhanced drivers to support the bundled ASUS utilities including ASUS GameFace Live! and SmartDoctor... These enhanced drivers also enable support for Direct3D and OpenGL modes...

D i rectXD i rectXD i rectXD i rectXD i rectX - installs the latest Microsoft DirectX runtime libraries...

VGARTVGARTVGARTVGARTVGART - installs the INF files necessary for the AGP or PCI Express function...

WDM WDM WDM WDM WDM - installs the Windows Display Model (WMD) drivers... This item appears only if your graphics card supports the Video-In Video-Out (VIVO) function...

The following screen displays the ATI driver and ASUS enhanced drivers installation process...

The ATI driver installation process appears only if you selected the ATI driver from the custom install screen...

A progress bar on the lower right-hand corner of your screen displays the progress of the driver installation process...

Page 14

88888 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card88888

The Microsoft DirectX setup installs components...

8... The following screen displays the Microsoft DirectX setup... Select I accept theI accept theI accept theI accept theI accept the agreementagreementagreementagreementagreement then click NextNextNextNextNext...

The DirectX installation process appears only if you selected the DirectX item from the custom install screen...

9... Click NextNextNextNextNext to continue or BackBackBackBackBack to return from previous screen or Cance l Cance l Cance l Cance l Cance l to abort installation...

The ASUS Enhanced Display drivers installation process appears only if you selected ASUS drivers from the custom install screen...

Page 15

Software insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ideSoftware insta l l at ion gu ide 99999

10... The Microsoft DirectX setup notifies you to restart your computer to apply changes... Click F in ish ... F in ish ... F in ish ... F in ish ... F in ish ...

11... From the ASUS VGARTD driver installation screen, select Yes ,Yes ,Yes ,Yes ,Yes , insta l l i ts VGARTD dr iverinsta l l i ts VGARTD dr iverinsta l l i ts VGARTD dr iverinsta l l i ts VGARTD dr iverinsta l l i ts VGARTD dr iver then click O KO KO KO KO K...

The ASUS VGA installation program will restart your computer after all components are installed into your computer...

The ASUS AGP VGARTD driver installation process appears only if you selected the VGART item from the custom install screen...

The following screen displays the Windows Display Model (WDM) drivers installation process...

12... Follow the succeeding screen instructions to install the appropriate VGARTD driver for the chipset on your motherboard...

Page 16

1 01 01 01 01 0 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card1 01 01 01 01 0

13... After the installation is complete, select Yes, I wantYes, I wantYes, I wantYes, I wantYes, I want to restart my computerto restart my computerto restart my computerto restart my computerto restart my computer n o wn o wn o wn o wn o w then click F in i shF in i shF in i shF in i shF in i sh...

The final tasks of the setup process is displayed on the progress bar...

Page 17

1 11 11 11 11 1Dr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ide

2... 22... 22... 22... 22... 2 Updating the WindowsUpdating the WindowsUpdating the WindowsUpdating the WindowsUpdating the Windows display driver display driver display driver display driver display driver

The latest display driver for your ASUS graphics card is available at the ASUS website (www... asus... com)... Visit the ASUS website to download driver updates...

To update the Windows display driver:

5... Select the current display adapter then click on the Propert ies iconPropert ies iconPropert ies iconPropert ies iconPropert ies icon...

1... Boot your computer...

2... Click the Sta r tSta r tSta r tSta r tSta r t button... Select Sett ingsSett ingsSett ingsSett ingsSett ings, then Contro lContro lContro lContro lContro l Pane lPane lPane lPane lPane l...

3... Double-click the SystemSystemSystemSystemSystem icon in the Control Panel... Select the HardwareHardwareHardwareHardwareHardware tab...

4... Click Device ManagerDevice ManagerDevice ManagerDevice ManagerDevice Manager, then double-click on D isp layD isp layD isp layD isp layD isp lay adaptersadaptersadaptersadaptersadapters...

Page 18

1 21 21 21 21 2 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card

6... From the Properties dialog box, select the Dr iverDr iverDr iverDr iverDr iver tab, then click on Update Dr iverUpdate Dr iverUpdate Dr iverUpdate Dr iverUpdate Dr iver...

7... Select the Don t search... IDon t search... IDon t search... IDon t search... IDon t search... I wi l l choose the dr iver towi l l choose the dr iver towi l l choose the dr iver towi l l choose the dr iver towi l l choose the dr iver to insta l li nsta l li nsta l li nsta l li nsta l l option, then click NextNextNextNextNext...

8... Click Have Disk ... ... ... Have Disk ... ... ... Have Disk ... ... ... Have Disk ... ... ... Have Disk ... ... ... on the following screen then click NextNextNextNextNext...

9... When setup prompts you for the location of the driver, click BrowseBrowseBrowseBrowseBrowse to locate the saved driver file in your hard disk, network, floppy or CD-ROM drive...

10... Follow the succeeding screen instructions...

11... The application prompts you to restart your computer to complete the process... Click Y e sY e sY e sY e sY e s...

Page 19

1 31 31 31 31 3Dr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ide

1... Click the Start Start Start Start Start button, then Contro l Pane lContro l Pane lContro l Pane lContro l Pane lContro l Pane l...

2... From the Control Panel, double-click the Add orAdd orAdd orAdd orAdd or Remove ProgramsRemove ProgramsRemove ProgramsRemove ProgramsRemove Programs icon to display the Add or RemoveAdd or RemoveAdd or RemoveAdd or RemoveAdd or Remove ProgramsProgramsProgramsProgramsPrograms screen...

3... Select ATI -SoftwareATI-SoftwareATI-SoftwareATI-SoftwareATI-Software Uninsta l l Ut i l i tyUninsta l l Ut i l i tyUninsta l l Ut i l i tyUninsta l l Ut i l i tyUninsta l l Ut i l i ty from the list, then click Change/Remove Change/Remove Change/Remove Change/Remove Change/Remove...

4... Follow the succeeding screen instructions...

5... The application prompts you to restart your computer to complete the process... Click Y e sY e sY e sY e sY e s...

2... 32... 32... 32... 32... 3 Removing display driverRemoving display driverRemoving display driverRemoving display driverRemoving display driver

If you want to replace your display driver or if you no longer need the display driver for your card, follow the procedures in this section to completely remove the display driver from the system...

To remove the display drivers:

Page 20

1 41 41 41 41 4 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card

3... Utilities

Your graphics card package comes with innovative technologies to turn your computer into a smart multimedia center... You can install or remove these utilities using any of the recommended methods in this section...

After installing the VGA drivers for your graphics card, use any of the recommended methods to install any of the following utilities:

A ... A ... A ... A ... A ... ASUS GameFaceLive!ASUS GameFaceLive!ASUS GameFaceLive!ASUS GameFaceLive!ASUS GameFaceLive!

The ASUS GameFace Live! is a real-time audio/video communication feature that enhances your interactive gaming experience... This utility enables point-to-point video conferencing functions and online gaming to take place at the same time... With this feature, you can see and talk to your opponents while playing full-screen online games!

B ... B ... B ... B ... B ... ASUS SmartDoctorASUS SmartDoctorASUS SmartDoctorASUS SmartDoctorASUS SmartDoctor

The Smart Doctor utility monitors the VGA card condition and significantly cools down the VGA Graphics Processing Unit (GPU)... This utility also allows you to adjust the graphics card clock settings...

The ASUS Smart Doctor utility works only for graphics card models with a built-in hardware monitor IC... If the hardware monitor IC is not present, only the SmartDoctor overclocking function will be installed...

The Smart Doctor utility is not supported in the Radeon 9600SE and Radeon 9200SE graphics card models...

C ... C ... C ... C ... C ... ASUS VideoSecur ityASUS VideoSecur ityASUS VideoSecur ityASUS VideoSecur ityASUS VideoSecur ity

ASUS VideoSecurity is a powerful security utility that detects any change in a specified surveillance region... Using video capture devices, video snapshots are captured automatically when there is a deviation in the user-defined surveillance region... An optional warning message is also sent to the user via email or phone...

Page 21

1 51 51 51 51 5Dr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ide

1... Insert the support CD into your CD-ROM drive...

2... If autorun is enabled, the 2D/3D Graphics & Video Accelerator appears automatically...

If autorun is disabled, run Setup... exeSetup... exeSetup... exeSetup... exeSetup... exe from the root directory of your support CD...

3... From the 2D/3D Graphics & Video Accelerator main menu, click Ut i l i t iesUt i l i t iesUt i l i t iesUt i l i t iesUt i l i t ies...

The Setup prepares the Install Shield Wizard which will guide you through the program setup process...

4... Click NextNextNextNextNext from the Install Shield Wizard welcome screen...

3... 13... 13... 13... 13... 1 Utilities installationUtilities installationUtilities installationUtilities installationUtilities installation

To install the utilities:

Method 1: Complete installationMethod 1: Complete installationMethod 1: Complete installationMethod 1: Complete installationMethod 1: Complete installation

The Complete installation method installs all the available program features... We recommend this method to most users...

5... Select Complete Complete Complete Complete Complete then click NextNextNextNextNext...

Page 22

1 61 61 61 61 6 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card

Method 2: Custom installationMethod 2: Custom installationMethod 2: Custom installationMethod 2: Custom installationMethod 2: Custom installation

The Custom installation method allows you to select the features you want to install... We recommend this method to advanced users...

1... Insert the support CD into your CD-ROM drive...

2... If autorun is enabled, the 2D/3D Graphics & Video Accelerator appears automatically...

If autorun is disabled, run Setup... exeSetup... exeSetup... exeSetup... exeSetup... exe from the root directory of your support CD...

3... From the 2D/3D Graphics & Video Accelerator main menu, click Ut i l i t iesUt i l i t iesUt i l i t iesUt i l i t iesUt i l i t ies...

The Setup prepares the Install Shield Wizard which will guide you through the program setup process...

6... The setup displays the target directory for the utilities, click NextNextNextNextNext...

7... After the installation is complete, click F in i shF in i shF in i shF in i shF in i sh...

Page 23

1 71 71 71 71 7Dr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ide

4... Click NextNextNextNextNext from the Install Shield Wizard welcome screen...

5... Select Custom Custom Custom Custom Custom then click NextNextNextNextNext...

6... Click the check box of the utility you want to install then click NextNextNextNextNext...

7... The setup displays the target directory for the utilities selected, click NextNextNextNextNext...

Page 24

1 81 81 81 81 8 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card

8... After the installation is complete, click F in i shF in i shF in i shF in i shF in i sh...

3 ... 23... 23... 23... 23... 2 Removing installed utilitiesRemoving installed utilitiesRemoving installed utilitiesRemoving installed utilitiesRemoving installed utilities

If you want to remove any of the installed utilities, follow the procedures in this section to completely remove the utilities from the system...

To remove the utilities:

1... Insert the support CD into your CD-ROM drive...

2... If autorun is enabled, the 2D/3D Graphics & Video Accelerator appears automatically...

If autorun is disabled, run Setup... exeSetup... exeSetup... exeSetup... exeSetup... exe from the root directory of your support CD...

3... From the 2D/3D Graphics & Video Accelerator main menu, click Ut i l i t iesUt i l i t iesUt i l i t iesUt i l i t iesUt i l i t ies...

The Setup prepares the Install Shield Wizard which will guide you through the program setup process...

4... The uninstall utility displays a verification message, click O KO KO KO KO K to remove the utilities installed...

Page 25

1 91 91 91 91 9Dr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ide

5... Click the check box of the utility you want to remove then click NextNextNextNextNext...

6... Click Yes Yes Yes Yes Yes to restart your computer and apply the changes...

Page 26

2 02 02 02 02 0 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card

4... Accessories Drivers

You can install additional accessories such as a webcam or game pad that enhances your computers multimedia features... You can install or remove the drivers for any of the following accessories:

4 ... 14... 14... 14... 14... 1 Installing Webcam driverInstalling Webcam driverInstalling Webcam driverInstalling Webcam driverInstalling Webcam driver

To install the webcam drivers:

1... Insert the support CD into your CD-ROM drive...

2... If autorun is enabled, the 2D/3D Graphics & Video Accelerator appears automatically...

If autorun is disabled, run Setup... exeSetup... exeSetup... exeSetup... exeSetup... exe from the root directory of your support CD...

3... From the 2D/3D Graphics & Video Accelerator main menu, click Accessor ies Dr iversAccessor ies Dr iversAccessor ies Dr iversAccessor ies Dr iversAccessor ies Dr ivers...

The Setup displays the supported accessories...

4... Click Webcam Dr iverWebcam Dr iverWebcam Dr iverWebcam Dr iverWebcam Dr iver from the Accessories Drivers sub-menu...

The setup prepares the files for installation...

Page 27

2 12 12 12 12 1Dr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ide

5... Click Next Next Next Next Next on the following screen...

The setup displays the installation progress... Click Cance l Cance l Cance l Cance l Cance l if you want to abort installation...

6... After the installation is complete, click F in i shF in i shF in i shF in i shF in i sh... You can now use your webcam...

Page 28

2 22 22 22 22 2 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card

4... 24... 24... 24... 24... 2 Installing the Gamepad driversInstalling the Gamepad driversInstalling the Gamepad driversInstalling the Gamepad driversInstalling the Gamepad drivers

To install the gamepad drivers:

1... Insert the support CD into your CD-ROM drive...

2... If autorun is enabled, the 2D/3D Graphics & Video Accelerator appears automatically...

If autorun is disabled, run Setup... exeSetup... exeSetup... exeSetup... exeSetup... exe from the root directory of your support CD...

3... From the 2D/3D Graphics & Video Accelerator main menu, click Accessor ies Dr iversAccessor ies Dr iversAccessor ies Dr iversAccessor ies Dr iversAccessor ies Dr ivers...

The Setup displays the supported accessories...

4... Click Game Pad Dr iverGame Pad Dr iverGame Pad Dr iverGame Pad Dr iverGame Pad Dr iver from the Accessories Drivers sub-menu...

5... Click Next Next Next Next Next on the following screen...

Page 29

2 32 32 32 32 3Dr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ide

The setup prepares the files for installation...

6... After the installation is complete, click F in i shF in i shF in i shF in i shF in i sh... You can now use your game pad...

Page 30

2 42 42 42 42 4 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card

4... 34... 34... 34... 34... 3 Removing Webcam driverRemoving Webcam driverRemoving Webcam driverRemoving Webcam driverRemoving Webcam driver

To remove the webcam drivers:

1... Insert the support CD into your CD-ROM drive...

2... If autorun is enabled, the 2D/3D Graphics & Video Accelerator appears automatically...

If autorun is disabled, run Setup... exeSetup... exeSetup... exeSetup... exeSetup... exe from the root directory of your support CD...

3... From the 2D/3D Graphics & Video Accelerator main menu, click Accessor ies Dr iversAccessor ies Dr iversAccessor ies Dr iversAccessor ies Dr iversAccessor ies Dr ivers...

The Setup displays the supported accessories...

4... Click Webcam Dr iverWebcam Dr iverWebcam Dr iverWebcam Dr iverWebcam Dr iver from the Accessories Drivers sub-menu...

5... The setup displays a confirmation message, click O KO KO KO KO K to remove webcam drivers...

Page 31

2 52 52 52 52 5Dr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ide

4... 44... 44... 44... 44... 4 Removing the Gamepad driversRemoving the Gamepad driversRemoving the Gamepad driversRemoving the Gamepad driversRemoving the Gamepad drivers

To remove the gamepad drivers:

1... Insert the support CD into your CD-ROM drive...

2... If autorun is enabled, the 2D/3D Graphics & Video Accelerator appears automatically...

If autorun is disabled, run Setup... exeSetup... exeSetup... exeSetup... exeSetup... exe from the root directory of your support CD...

3... From the 2D/3D Graphics & Video Accelerator main menu, click Accessor ies Dr iversAccessor ies Dr iversAccessor ies Dr iversAccessor ies Dr iversAccessor ies Dr ivers...

The Setup displays the supported accessories...

4... Click Game Pad Dr iverGame Pad Dr iverGame Pad Dr iverGame Pad Dr iverGame Pad Dr iver from the Accessories Drivers sub-menu...

5... The setup displays a confirmation message, click N oN oN oN oN o to remove gamepad drivers...

6... After the uninstall process is complete, click F in i shF in i shF in i shF in i shF in i sh...

Page 32

2 62 62 62 62 6 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card

5... ASUS Contact information

To display the ASUS contact information:

1... Insert the support CD into your CD-ROM drive...

2... If autorun is enabled, the 2D/3D Graphics & Video Accelerator appears automatically...

If autorun is disabled, run Setup... exeSetup... exeSetup... exeSetup... exeSetup... exe from the root directory of your support CD...

3... From the 2D/3D Graphics & Video Accelerator main menu, click ASUS Contact InfoASUS Contact InfoASUS Contact InfoASUS Contact InfoASUS Contact Info...

The setup displays a text box containing the contact information for all the ASUS regional offices worldwide...

4... Move the scro l l barscro l l barscro l l barscro l l barscro l l bar to view the whole text...

Page 33

2 72 72 72 72 7Dr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ide

6... Other information

6... 16... 16... 16... 16... 1 Browse Support CDBrowse Support CDBrowse Support CDBrowse Support CDBrowse Support CD

To browse the support CD:

1... Insert the support CD into your CD-ROM drive...

2... If autorun is enabled, the 2D/3D Graphics & Video Accelerator appears automatically...

If autorun is disabled, run Setup... exeSetup... exeSetup... exeSetup... exeSetup... exe from the root directory of your support CD...

3... From the 2D/3D Graphics & Video Accelerator main menu, click Browse CDBrowse CDBrowse CDBrowse CDBrowse CD...

The setup displays the following window...

Page 34

2 82 82 82 82 8 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card

6... 26... 26... 26... 26... 2 View readme fileView readme fileView readme fileView readme fileView readme file

To view the readme file:

1... Insert the support CD into your CD-ROM drive...

2... If autorun is enabled, the 2D/3D Graphics & Video Accelerator appears automatically...

If autorun is disabled, run Setup... exeSetup... exeSetup... exeSetup... exeSetup... exe from the root directory of your support CD...

3... From the 2D/3D Graphics & Video Accelerator main menu, click Read MeRead MeRead MeRead MeRead Me...

The setup displays the following window...

Page 35

A - 1A - 1A - 1A - 1A - 1Dr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ide

Appendix: Basic troubleshooting

If you encounter any of the following conditions after installing your graphics card, try performing one of the possible solutions before calling for technical support...

Prob lemProb lemProb lemProb lemProb lem

CauseCauseCauseCauseCause

Solution

CauseCauseCauseCauseCause

Solution

CauseCauseCauseCauseCause

Solution

CauseCauseCauseCauseCause

Solution

CauseCauseCauseCauseCause

Solution

CauseCauseCauseCauseCause

Solutions

No disp lay after the card is insta l led... No disp lay after the card is insta l led... No disp lay after the card is insta l led... No disp lay after the card is insta l led... No disp lay after the card is insta l led...

Your card might not be properly installed...

Make sure that the card is not tilted or skewed on the slot...

Your monitor might not be properly connected...

Make sure that the signal cable is properly connected to your monitor and graphics card...

Your graphics card is not supported by your motherboard...

Check the technical documentation that came with your motherboard and check the required specifications for your graphics card (e... g... , AGP voltage requirement)...

The graphics card auxiliary power is not connected...

Make sure that the auxiliary power cables are properly connected with the power supply unit...

Insufficient power supply...

Make sure that your power supply unit can provide the minimum power requirement to your system...

Incorrect motherboard hardware system settings (e... g... , system control panel connections)...

Make sure that the system control panel cables are connected properly (e... g... , Power Switch, Reset)...

Make sure that your CPU, CPU fan and/or memory DIMMs are in good working condition and are connected properly...

Page 36

A - 2A - 2A - 2A - 2A - 2 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card

Wrong color ba lanceWrong color ba lanceWrong color ba lanceWrong color ba lanceWrong color ba lance

Your card might not be properly installed...

Make sure that the card is not tilted or skewed on the slot...

Your video controls might not be properly set...

Manually configure your video controls to your desired settings...

Configure your graphics card display resolution in Display Properties...

There may be unsupported graphics card drivers installed in your system... Conflicts may occur with graphics card drivers from different vendors...

Remove any unused graphics card drivers installed in your system...

Install the graphics card driver from the support CD that came with your graphics card package...

The graphics card auxiliary power is not connected...

Make sure that the auxiliary power cables are properly connected with the power supply unit...

If your monitor comes with BNC connectors, the port connections might be incorrect...

Make sure that all BNC connectors are connected properly to its port...

Your monitor software settings might be incorrect...

Configure your monitor software to your desired settings...

Prob lemProb lemProb lemProb lemProb lem

CauseCauseCauseCauseCause

Solution

CauseCauseCauseCauseCause

Solutions

CauseCauseCauseCauseCause

Solutions

CauseCauseCauseCauseCause

Solution

CauseCauseCauseCauseCause

Solution

CauseCauseCauseCauseCause

Solution

Page 37

A - 3A - 3A - 3A - 3A - 3Dr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ideDr ivers and ut i l i t ies insta l lat ion gu ide

Other problems that you might encounter can be related to other parts or accessories (e... g... , motherboard, power supply unit, LCD/CRT) of your system...

The screen image is garb led... The screen image is garb led... The screen image is garb led... The screen image is garb led... The screen image is garb led...

Your monitor cannot support desired display settings...

Make sure that your monitor can support your desired display settings... See the technical documentation that came with your monitor...

Your graphics card cannot support desired system settings...

Make sure that your graphics card can support your desired display settings... See the specifications table that came with this graphics card package...

Some graphics driver files might be corrupted...

Remove your current graphics drivers and reinstall the graphics drivers from the support CD...

Poor heat dissipation inside the chassis...

Make sure that the chassis fan, CPU and heatsink with fan, and/or the graphics card GPU fan are working properly...

Prob lemProb lemProb lemProb lemProb lem

CauseCauseCauseCauseCause

Solution

CauseCauseCauseCauseCause

Solution

CauseCauseCauseCauseCause

Solution

CauseCauseCauseCauseCause

Solutions

Page 38

A - 4A - 4A - 4A - 4A - 4 ASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics cardASUS ATI ser ies graph ics card

Manualsnet FAQs

If you want to find out how the A7000-T-64M ASUS works, you can view and download the ASUS A7000-T-64M Graphics Card User Manual on the Manualsnet website.

Yes, we have the User Manual for ASUS A7000-T-64M as well as other ASUS manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a ASUS A7000-T-64M. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the ASUS A7000-T-64M Graphics Card User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This ASUS A7000-T-64M Graphics Card User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download ASUS A7000-T-64M Graphics Card User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print ASUS A7000-T-64M Graphics Card User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the ASUS A7000-T-64M Graphics Card User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.