Contents

ASUS Essentio CM1530 CPU User Manual PDF

1 of 67
1 of 67

Summary of Content for ASUS Essentio CM1530 CPU User Manual PDF

ASUS Essentio Desktop PC CM1530

User Manual

ii

Copyright 2010 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (ASUS). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners benefit, without intent to infringe.

E5324

First Edition January 2010

iii

Contents

Notices ...........................................................................................................v Safety information ......................................................................................... vii Conventions used in this guide .................................................................... viii Where to find more information ................................................................... viii Package contents .......................................................................................... ix

Chapter 1: Getting started Welcome! .................................................................................................... 1-1 Getting to know your computer ................................................................... 1-1 Setting up your computer ............................................................................ 1-5 Turning your computer ON/OFF ................................................................. 1-7

Chapter 2: Using Windows 7 Starting for the first time .............................................................................. 2-1 Using Windows 7 desktop ......................................................................... 2-2 Managing your files and folders .................................................................. 2-7 Restoring your system .............................................................................. 2-10 Protecting your computer ...........................................................................2-11 Getting Windows Help and Support ........................................................ 2-15

Chapter 3: Connecting devices to your computer Connecting a USB storage device .............................................................. 3-1 Connecting microphone and speakers ....................................................... 3-2 Connecting multiple external displays ........................................................ 3-5 Connecting an HDTV .................................................................................. 3-7

Chapter 4: Using your computer Proper posture when using your Desktop PC............................................. 4-1 Using the memory card reader ................................................................... 4-2 Using the optical drive ................................................................................ 4-3 Using the multimedia keyboard(on selected models only) ......................... 4-4

Chapter 5: Connecting to the Internet Wired connection ........................................................................................ 5-1 Wireless connection (on selected models only) .......................................... 5-3

iv

Contents

Chapter 6: Using the utilities ASUS AI Manager ....................................................................................... 6-1 ASUS Update ............................................................................................. 6-8 ASUS MyLogo2 ....................................................................................... 6-9 Nero 9 ..................................................................................................... 6-10 Recovering your system ........................................................................... 6-14

Chapter 7: Troubleshooting Troubleshooting .......................................................................................... 7-1

v

Notices REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://green.asus.com/english/REACH.htm

Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received including interference that may cause

undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturers instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected. Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate this equipment.

vi

RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.

Macrovision Corporation Product Notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Lithium-Ion Battery Warning CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instructions.

vii

Safety information

Disconnect the AC power and peripherals before cleaning. Wipe the Desktop PC using a clean cellulose sponge or chamois cloth dampened with solution of nonabrasive detergent and a few drops of warm water then remove any extra moisture with a dry cloth.

DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.

DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak. DO NOT place or drop objects on top and do not shove any foreign objects into the

Desktop PC. DO NOT expose to strong magnetic or electrical fields. DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during

electrical storms. Battery safety warning: DO NOT throw the battery in fire. DO NOT short circuit the

contacts. DO NOT disassemble the battery. Use this product in environments with ambient temperatures between 0C (32F)and

35C (95F). DO NOT cover the vents on the Desktop PC to prevent the system from overheating. DO NOT use damaged power cords, accessories, or other peripherals. To prevent electrical shock hazard, disconnect the power cable from the electrical outlet

before relocating the system. Seek professional assistance before using an adapter or extension cord. These devices

could interrupt the grounding circuit. Ensure that your power supply is set to the correct voltage in your area. If you are not

sure about the voltage of the electrical outlet you are using, contact your local power company.

If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

viii

Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.

CAUTION: Information to prevent damage to the components when trying to complete a task.

NOTE: Tips and additional information to help you complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

Where to find more information Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS website provides updated information on ASUS hardware and software

products. Refer to the ASUS website www.asus.com. ASUS Local Technical Support Visit ASUS website at http://support.asus.com/contact for the contact information of

local Technical Support Engineer.

ix

ASUS Essentio Desktop PC Keyboard x1 Mouse x1

Power cord x1 Support DVD x1 Recovery DVD x1

Installation Guide

Nero 9 burning software DVD x1

Installation Guide x1 Warranty card x1

Antenna (optional) x2

Package contents

If any of the above items is damaged or missing, contact your retailer.

The illustrated items above are for reference only. Actual product specifications may vary with different models.

ASUS CM1530 1-1

Chapter 1 Getting started

Getting to know your computer

Front panel

Illustrations are for reference only. The ports and their locations, and the chassis color vary with different models.

Welcome! Thank you for purchasing the ASUS Essentio CM1530 HD Entertainment Desktop PC! The ASUS Essentio CM1530 HD Entertainment Desktop PC provides extreme performance, uncompromised reliability, and user-centric utilities. All these values are encapsulated in a sleek and stylish system casing.

Read the ASUS Warranty Card before setting up your ASUS Desktop PC.

Click the number to view its corresponding description.

1

2

3

4

5

6

8

9

10

7

1-2 Chapter 1: Getting started

Rear panel

1. ODD cover. Push to eject the optical disk drive tray. 2. Secondary ODD cover. Push to open the optical disk drive tray. 3. USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0

devices such as a mouse, printer, scanner, camera, PDA, and others. 4. Power button. Press this button to turn on your computer. 5. Front I/O ports cover. Pull to open the front panel. 6. Secure Digital / MultiMediaCard slot. Insert a Secure Digital card or

MultiMediaCard into this slot. 7. Memory Stick / Memory Stick Pro card slot. Insert a Memory Stick / Memory

Stick Pro card into this slot. 8. CompactFlash / Microdrive card slot. Insert a CompactFlash / Microdrive card

into this slot. 9. Headphone port (lime). This port connects to a headphone or speaker. 10. Microphone port (pink). This port connects to a microphone.

Click the number to view its corresponding description.

1110

7 8 9

12

2

3

4

6

5

6

4

13 14

15

16

17

14

18

19

1

5

ASUS CM1530 1-3

Audio 2, 4, 6, or 8-channel configuration

Port Headset 2-channel 4-channel 6-channel 8-channel

Light Blue Line In Line In Line In Line In Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out Pink Mic In Mic In Mic In Mic In

Orange Center/Subwoofer Center/Subwoofer Black Rear Speaker Out Rear Speaker Out Rear Speaker Out Gray Side Speaker Out

Refer to the audio configuration table below for the function of the audio ports in a 2, 4, 6, or 8-channel configuration.

13. Expansion slot brackets. Remove the expansion slot bracket when installing an expansion card.

14. VGA ports. These ports allow your computer to connect to a VGA monitor or other VGA-compatible devices.

1. Voltage selector. Select the input voltage. 2. Power switch. Switch to turn ON/OFF the power supply to your computer. 3. Power connector. Plug the power cord to this connector. 4. USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0

devices such as a mouse, printer, scanner, camera, PDA, and others. 5. HDMI ports. These ports allow your computer to connect to an HDMI monitor or other

HDMI-compatible devices. 6. DVI-D ports. These ports are for any DVI-D compatible device and is HDCP compliant

allowing playback of HD DVD, Blu-ray, and other protected content. 7. Side Speaker Out port (gray). This port connects to the side speakers in an 8-channel

audio configuration. 8. Rear Speaker Out port (black). This port connects to the rear speakers in a 4, 6, and

8-channel audio configuration. 9. Center/Subwoofer port (orange). This port connects to the center/subwoofer

speakers. 10. Microphone port (pink). This port connects to a microphone. 11. Line Out port (lime). This port connects to a headphone or speaker. In a 4, 6, or

8-channel configuration, the function of this port becomes Front Speaker Out. 12. Line In port (light blue). This port connects to a tape, CD, DVD player, or other audio

sources.

1-4 Chapter 1: Getting started

15. ASUS WLAN Card. This optional WLAN card allows your computer to connect to a wireless network.

16. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.

LAN port LED indications

Activity/Link LED Speed LED Status Description Status Description OFF No link OFF 10Mbps connection ORANGE Linked ORANGE 100Mbps connection BLINKING Data activity GREEN 1Gbps connection LAN port

SPEED LED

ACT/LINK LED

DO NOT block the air vents on the chassis. Always provide proper ventilation for your computer.

17. Air vents. These vents allow air ventilation.

18. Optical S/PDIF_OUT port (optional). This port connects to an external audio output device via an optical S/PDIF cable.

19. P/S Keyboard port. This port is for a P/S 2 keyboard.

ASUS CM1530 1-5

Setting up your computer This section guides you through connecting the main hardware devices, such as the external monitor, keyboard, mouse, and power cord, to your computer.

Connecting an external monitor Using the ASUS Graphics Card Connect your monitor to the display output port on the discrete ASUS Graphics Card.

To connect an external monitor using the ASUS Graphics Card:

1. Connect a monitor to a display output port on the ASUS Graphics Card. 2. Plug the monitor to a power source.

The display output ports on the ASUS Graphics Card may vary with different models.

1-6 Chapter 1: Getting started

Connecting a USB keyboard and a USB mouse Connect a USB keyboard and a USB mouse to the USB ports on the rear panel of your computer.

Connecting the power cord Connect one end of the power cord to the power connector on the rear panel of your computer and the other end to a power source.

ASUS CM1530 1-7

Turning your computer ON/OFF This section describes how to turn on/off your computer after setting up your computer.

Turning your computer ON To turn your computer ON:

1. Turn your monitor ON. 2. Turn the power switch ON, then press the power button on your computer.

Turning your computer OFF To turn your computer OFF:

1. Close all running applications.

2. Click on the Windows desktop.

3. Click to shut down the operating system. 4. Turn the power switch OFF.

3. Wait until the operating system loads automatically.

OFF ON

Power button

ASUS CM1530 2-1

Chapter 2 Using Windows 7

Starting for the first time When you start your computer for the first time, a series of screens appear to guide you in configuring the basic settings of your Windows 7 operating system.

To start for the first time:

1. Turn your computer on. Wait for a few minutes until the Set Up Windows screen appears.

2. From dropdown list, select your language. Click Next. 3. From the dropdown lists, select your Country or region, Time and currency, and

Keyboard layout. Click Next. 4. Key in unique names for the user name and computer name. Click Next. 5. Key in the necessary information to set up your password, then click Next. You may

also click Next to skip this step without entering any information.

6. Carefully read the license terms. Tick I accept the license terms and click Next. 7. Select Use recommended settings or Install important updates only to set up the

security settings for your computer. To skip this step, select Ask me later. 8. Review your date and time settings. Click Next. The system loads the new settings and

restarts. You may now start using your computer.

If you want to set up a password for your account later, refer to the section Setting up a user account and password in this chapter.

2-2 Chapter 2: Using Windows 7

Using Windows 7 desktop

Notification areaTaskbar

Start menu

Using the Start menu The Start menu gives you access to programs, utilities, and other useful items on your computer. It also provides you with more information about Windows 7 through its Help and Support feature.

Launching items from the Start menu To launch items from the Start menu:

1. From the Windows taskbar, click the Start icon . 2. From the Start menu, select the item that you want to launch.

You may pin programs that you want constantly displayed on the Start menu. For more details, refer to the section Pinning programs on the Start menu or taskbar on this chapter.

Click the Start icon > Help and Support to obtain more information about Windows 7.

ASUS CM1530 2-3

Using the Getting Started item The Getting Started item on the Start menu contains information about some basic tasks such as personalizing Windows, adding new users, and transferring files to help you to familiarize yourself with using Windows 7.

To use the Getting Started item:

1. From the Windows taskbar, click the Start icon to launch the Start menu.

2. Select Getting Started. The list of available tasks appears.

3. Select the task that you want to do.

Using the taskbar The taskbar allows you to launch and manage programs or items installed on your computer.

Launching a program from the taskbar To launch a program from the taskbar:

From the Windows taskbar, click an icon to launch it. Click the icon again to hide the program.

You may pin programs that you want constantly displayed on the taskbar. For more details, refer to the section Pinning programs on the Start menu or taskbar on this chapter.

2-4 Chapter 2: Using Windows 7

Pinning items on the jumplists When you right-click an icon on the taskbar, a jumplist launches to provide you with quick-access to the programs or items related links.You may pin items on the jumplist such as favorite websites, often-visited folders or drives, or recently played media files.

To pin items to the jumplist:

1. From the taskbar, right-click an icon. 2. From the jumplist, right-click the item that

you want to pin, then select Pin to this list.

Unpinning items from the jumplist To unpin items from the jumplist:

1. From the taskbar, right-click an icon. 2. From the jumplist, right-click the item that you want to remove from the jumplist, then

select Unpin from this list.

Pinning programs on the Start menu or taskbar To pin programs on the Start menu or taskbar:

1. From the Windows taskbar, click the Start icon to launch the Start menu.

2. Right-click the item that you want to pin on the Start menu or taskbar.

3. Select Pin to Taskbar or Pin to Start menu.

You may also right-click on the icon of a running program on the taskbar, then select Pin this program to taskbar.

ASUS CM1530 2-5

Unpinning programs from the Start menu To unpin programs from the Start menu:

1. From the Windows taskbar, click the Start icon to launch the Start menu. 2. From the Start menu, right-click the program that you want to unpin, then select

Remove from this list.

Unpinning programs from the taskbar To unpin programs from the taskbar:

1. From the taskbar, right-click the program that you want to remove from the taskbar, then select Unpin this program from taskbar.

Using the notification area By default, the notification area shows these three icons:

Action Center notification

Click this icon to display all the alert messages/notifications and launch the Windows Action Center.

Network connection

This icon displays the connection status and signal strength of the wired or wireless network connection.

Volume

Click this icon to adjust the volume.

Displaying an alert notification To display an alert notification:

Click the Notification icon , then click the message to open it.

For more details, refer to the section Using Windows Action Center in this chapter.

2-6 Chapter 2: Using Windows 7

Customizing icons and notifications You may choose to display or hide the icons and notifications on the taskbar or on the notification area.

To customize icons and notifications:

1. From the notification area, click on the arrow icon . 2. Click Customize. 3. From the dropdown list, select the behaviors for the icons or items that you want

customize.

ASUS CM1530 2-7

Managing your files and folders Using Windows Explorer Windows Explorer allows you to view, manage, and organize your files and folders.

Launching Windows Explorer To launch Windows Explorer:

1. From the Windows taskbar, click the Start icon to launch the Start menu. 2. Click Computer to launch Windows Explorer.

Exploring files and folders To explore files and folders:

1. Launch Windows Explorer. 2. From the navigation or view pane, browse for the location of your data. 3. From the breadcrumb bar, click the arrow to display the contents of the drive or folder.

Navigation pane

Breadcrumb bar

Search bar

View icon

Preview iconToolbar

View pane

2-8 Chapter 2: Using Windows 7

Customizing the file/folder view To customize the file/folder view:

1. Launch Windows Explorer. 2. From the navigation pane, select the location of your

data.

3. From the toolbar, click the View icon . 4. From the View menu, move the slider to select how you

want to view the file/folder.

You may also right-click anywhere on the View pane, click View, and select the view type that you want.

Arranging your files To arrange your files:

1. Launch Windows Explorer. 2. From the Arrange by field, click to display the dropdown list. 3. Select your preferred arrangement type.

ASUS CM1530 2-9

Sorting your files To sort your files:

1. Launch Windows Explorer. 2. Right-click anywhere on the View pane. 3. From the menu that appears, select Sort

by, then select your preferred sorting type.

Grouping your files To group your files:

1. Launch Windows Explorer. 2. Right-click anywhere on the View pane. 3. From the menu that appears, select

Group by, then select your preferred grouping type.

Adding a new folder To add a new folder:

1. Launch Windows Explorer. 2. From the toolbar, click New folder. 3. Key in a name for the new folder.

You may also right-click anywhere on the View pane, click New > Folder.

2-10 Chapter 2: Using Windows 7

Backing up your files Setting up a backup To set up a backup:

1. Click > All Programs > Maintenance > Backup and Restore. 2. Click Set up backup. Click Next.

Restoring your system The Windows System Restore feature creates a restore point where the computers system settings are stored at certain time and date. It allows you to restore or undo changes to your computers system settings without affecting your personal data.

To restore your system:

1. Close all running applications.

2. Click > All Programs > Accessories > System Tools > System Restore. 3. Follow the onscreen instructions to complete the process.

3. Select your backup destination. Click Next. 4. Select Let Windows choose (recommended) or Let me choose as your backup

mode.

If you select Let Windows choose, Windows will not back up your programs, FAT- formatted files, Recycle Bin files, or temporary files that are 1GB or more.

5. Follow the onscreen instructions to finish the process.

ASUS CM1530 2-11

Protecting your computer Using Windows 7 Action Center Windows 7 Action Center provides you with alert notifications, security information, system maintenance information, and the option to automatically troubleshoot and fix some common computer problems.

You may customize the notifications. For more details, refer to the previous section Customizing icons and notifications in this chapter.

Launching Windows 7 Action Center To launch Windows 7 Action Center:

1. To launch Windows 7 Action Center, click the Notification icon , then click Open Action Center.

2. From Windows 7 Action Center, click the task that you want to do.

2-12 Chapter 2: Using Windows 7

Using Windows Update Windows Update allows you to check and install the latest updates to enhance the security and performance of your computer.

Launching Windows Update To launch Windows Update:

1. From the Windows taskbar, click the Start icon to launch the Start menu. 2. Select All Programs > Windows Update. 3. From the Windows Update screen, click the task that you want to do.

ASUS CM1530 2-13

Setting up a user account and password You may create user accounts and passwords for people who will use your computer.

Setting up a user account To set up a user account:

1. From the Windows taskbar, click > Getting Started > Add new users. 2. Select Manage another account. 3. Select Create a new account. 4. Key in the name of the new user. 5. Select either Standard user or Administrator as the user type. 6. When done, click Create Account.

2-14 Chapter 2: Using Windows 7

Setting up a users password To set up a users password:

1. Select the user that you would like to set a password. 2. Select Create a password.

3. Key in a password and confirm it. Key in your passwords hint. 4. When done, click Create password.

ASUS CM1530 2-15

Activating the anti-virus software Trend Micro Internet Security is a pre-installed anti-virus software on your computer. After activating it, you have a 60-day trial period before the software expires and you need to purchase a licensed version.

To activate Trend Micro Internet Security:

1. Run the Trend Micro Internet Security application. 2. Carefully read the license terms. Click Agree & Activate. 3. Key in your e-mail address and select your location. Click Next. 4. Click Finish to complete the activation.

Getting Windows Help and Support Windows Help and Support provides you with guides and answers in using the applications in Windows 7 platform.

To launch Windows Help and Support, click > Help and Support.

Ensure that you are connected to the Internet to obtain the latest Windows online help.

ASUS CM1530 3-1

Chapter 3 Connecting devices to your computer

To remove a USB storage device:

1. Click from the Windows notification area on your computer, then click Eject USB2.0 FlashDisk.

2. When the Safe to Remove Hardware message pops up, remove the USB storage device from your computer.

DO NOT remove a USB storage device when data transfer is in progress. Doing so may cause data loss or damage the USB storage device.

Connecting a USB storage device This desktop PC provides USB 2.0/1.1 ports on both the front and rear panels. The USB ports allow you to connect USB devices such as storage devices.

To connect a USB storage device:

Insert the USB storage device to your computer.

Front panel Rear panel

3-2 Chapter 3: Connecting devices to your computer

Connecting microphone and speakers This desktop PC comes with microphone ports and speaker ports on both the front and rear panels. The audio I/O ports located on the rear panel allow you to connect 2-channel, 4-channel, 6-channel, and 8-channel stereo speakers.

Connecting Headphone and Mic

Connecting 2-channel Speakers

ASUS CM1530 3-3

Connecting 4-channel Speakers

Connecting 6-channel Speakers

3-4 Chapter 3: Connecting devices to your computer

Connecting 8-channel Speakers

ASUS CM1530 3-5

Connecting multiple external displays Your desktop PC comes with VGA, HDMI, and DVI ports and allows you to connect multiple external displays.

Setting up multiple displays When using multiple monitors, you are allowed to set display modes. You can use the additional monitor as a duplicate of your main display, or as an extension to enlarge your Windows desktop.

To set up multiple displays:

1. Turn off your computer. 2. Connect the two monitors to your computer and connect the power cords to the

monitors. Refer to Setting up your computer section in Chapter 1 for details on how to connect a monitor to your computer.

When a graphics card is installed in your computer, connect the monitors on the output ports of the graphics card.

For some graphic cards, only the monitor that is set to be the primary display has display during POST. The dual display function works only under Windows.

3-6 Chapter 3: Connecting devices to your computer

5. Select the display mode from the Multiple displays: dropdown list. Duplicate these displays: Select this option to use the additional monitor as a

duplicate of your main display. Extend these displays: Select this option to use the additional monitor as an

extension display. This increases your desktop space. Show desktop only on 1 / 2: Select this option to show the desktop only on

monitor 1 or monitor 2. Remove this display: Select this option to remove the selected display.

6. Click Apply or OK, then click Keep Changes on the confirmation message.

3. Turn on your computer. 4. Do any of the following to open the Screen Resolution setting screen:

Click > Control Panel > Appearance and Personalization > Display > Change display settings.

Right click anywhere on your Windows desktop. When the pop-up menu appears, click Personalize > Display > Change display settings.

ASUS CM1530 3-7

Connecting an HDTV Connect a High Definition TV (HDTV) to the HDMI port of your computer.

You need an HDMI cable to connect the HDTV and the computer. The HDMI cable is purchased separately.

To get the best display performance, ensure that your HDMI cable is less than 15 meters.

ASUS CM1530 4-1

Chapter 4 Using your computer

Proper posture when using your Desktop PC When using your Desktop PC, maintaining the proper posture is necessary to prevent strain to your wrists, hands, and other joints or muscles. This section provides you with tips on avoiding physical discomfort and possible injury while using and fully enjoying your Desktop PC.

To maintain the proper posture:

Position your computer chair to ensure that your elbows are at or slightly above the keyboard to get a comfortable typing position.

Adjust the height of your chair to make sure that your knees are slightly higher than your hips to relax the backs of your thighs. If necessary, use a footrest to raise the level of your knees.

Adjust the back of your chair so that the base of your spine is firmly supported and angled slightly backward.

Sit upright with your knees, elbows, and hips at an approximately 90 angle when you are in front of your PC.

Place the monitor directly in front of you, and adjust the top of the monitor screen within your eye level so that your eyes look slightly downward.

Keep the mouse close to the keyboard, and if necessary, use a wrist rest for support to reduce the pressure on your wrists while typing.

Use your Desktop PC in a comfortably-lit area, and keep it away from sources of glare such as windows and direct sunlight.

Take regular mini-breaks from using your Desktop PC.

90o angle

Eye level to the top of the monitor screen

Foot rest

4-2 Chapter 4: Using your computer

4. When finished, right-click the memory card drive icon on the Computer screen, click Eject, and then remove the card.

Never remove cards while or immediately after reading, copying, formatting, or deleting data on the card or else data loss may occur.

To prevent data loss, use Safely Remove Hardware and Eject Media in the Windows notification area before removing the memory card.

Using the memory card reader Digital cameras and other digital imaging devices use memory cards to store digital picture or media files. The built-in memory card reader on the front panel of your system allows you to read from and write to different memory card drives.

To use the memory card:

1. Pull down both sides of the cover from the notch area to open it. 2. Insert the memory card into the card slot.

3. Select a program from the AutoPlay window to access your files.

If AutoPlay is NOT enabled in your computer, click Windows 7 Start button on the taskbar, click Computer, and then double-click the memory card icon to access the data on it.

Each card slot has its own drive icon and it is displayed on the Computer screen.

The memory card reader LED lights up and blinks when data is being read from or written to the memory card.

A memory card is keyed so that it fits in only one direction. DO NOT force the card into a slot to avoid damaging the card.

You can place the media in one or more of the card slots and use each media independently. Place only one memory card in a slot at one time.

1

2

ASUS CM1530 4-3

Using the optical drive

Inserting an optical disc To insert an optical disc:

1. While your system is on, press PUSH on the drive bay cover to open the tray. 2. Place the disc to the optical drive with the label side facing up. 3. Push the tray to close it. 4. Select a program from the AutoPlay window to access your files.

Removing an optical disc To remove an optical disc:

1. While the system is on, do either of the following to eject the tray: Press PUSH on the drive bay cover.

Right-click the CD/DVD drive icon on the Computer screen, and then click Eject.

2. Remove the disc from the disc tray.

If AutoPlay is NOT enabled in your computer, click Windows 7 Start button on the taskbar, click Computer, and then double-click the CD/DVD drive icon to access the data on it.

1

4-4 Chapter 4: Using your computer

Using the multimedia keyboard (on selected models only)

The keyboard varies with models. The illustrations on this section are for reference only.

`

6 7 8 9 10 11 12 13 14 15 16 17

2

3

4

5

1 18

19

20

21

22

The special function keys only work on Windows Vista / Windows 7 operating systems.

Keys Description Keys Description

1. Launches Windows gadgets.

12. Press to launch Microsoft MSN or, if not installed, connects to the MSN download page.

2. Activates Windows Flip 3D. 13. Press to launch Windows Search screen.

3. Reduces picture size in Windows Photo Viewer. 14. Press to play or pause

playback in Windows Media Player.

4. Increases picture size in Windows Photo Viewer. 15. Press to stop playback in

Windows Media Player.

5. Functions with keys F1~F12. 16. Press to go to the previous track in Windows Media Player.

6. Press to launch Microsoft Word. 17. Press to go to the next

track in Windows Media Player.

7. Press to launch Microsoft Excel. 18. Decreases the system volume.

8. Press to launch Microsoft PowerPoint. 19. Increases the system volume.

9. Press to launch Microsoft Internet Explorer. 20. Turns the volumes mute mode on/off.

10. Press to launch Microsoft Outlook. 21. Launches Windows Media Player.

11. Press to launch the Favorites folder in Windows Internet Explorer.

22. Launches Windows Media Center.

ASUS SK-2045 keyboard

ASUS CM1530 4-5

ASUS-Razer Arctosa Gaming keyboard

Keys Description

1. Plays or pauses playback in a media player.

2. Stops playback in a media player.

3. Goes to the previous track in a media player.

4. Goes to the next track in a media player.

5. Decreases the system volume.

6. Increases the system volume.

7. Turns the volumes mute mode on/off.

8. Switches profiles working with F1 ~ F10 keys.

1

3

2 5 6

4 8 7

The special function keys work on Windows XP / Vista / 7 operating systems.

Install the driver before using the keyboard. Visit the Razer website at www.razersupport.com to download the driver.

4-6 Chapter 4: Using your computer

`

1 2 3 4 5 6 7 8 9 10 11 12 13

The special function keys work on Windows ME / 2000 / XP / Vista / 7 operating systems without installing a driver. For Windows 98SE operating system, visit the BTC website at www.btc.com.tw to download the driver.

Install Microsoft Internet Explorer 5.0 or later versions before using the Internet keys.

Description Keys Description

1. Enters into sleep mode. Press any key to wake up your computer and return to the previous working status.

8. Increases the system volume.

2. Returns to the last page you viewed. 9. Turns the volumes mute mode on/off.

3. Goes to the next page you viewed before. 10. Goes to the previous track in a media

player.

4. Launches the default homepage in Windows Internet Explorer. 11. Plays or pauses playback in a media

player.

5. Launches the Favorites folder in Windows Internet Explorer. 12. Goes to the next track in a media player.

6. Launches your default email application. 13. Stops playback in a media player.

7. Decreases the system volume.

BTC 6200C keyboard

ASUS CM1530 5-1

Chapter 5 Connecting to the Internet

Connecting via a DSL/cable modem To connect via a DSL/cable modem:

1. Set up your DSL/cable modem.

Wired connection Use an RJ-45 cable to connect your computer to a DSL/cable modem or a local area network (LAN).

Modem

RJ-45 cable

2. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to a DSL/cable modem.

Refer to the documentation that came with your DSL/cable modem.

3. Turn on the DSL/cable modem and your computer. 4. Configure the necessary Internet connection settings.

Contact your Internet Service Provider (ISP) for details or assistance in setting up your Internet connection.

5-2 Chapter 5: Connecting to the Internet

Connecting via a local area network (LAN) To connect via a LAN:

1. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to your LAN.

LANRJ-45 cable

2. Turn on your computer. 3. Configure the necessary Internet connection settings.

Contact your network administrator for details or assistance in setting up your Internet connection.

ASUS CM1530 5-3

Wireless connection (on selected models only) Connect your computer to the Internet through a wireless connection.

To increase the range and sensitivity of the wireless radio signal, connect the external antennas to the antenna connectors on the ASUS WLAN Card.

Place the antennas on the top of your computer for the best wireless performance.

The external antennas are optional items.

To establish a wireless connection, you need to connect to a wireless access point (AP).

Wireless AP

Modem

5-4 Chapter 5: Connecting to the Internet

To connect to a wireless network:

1. Click the network icon in the notification area to display the available wireless networks.

2. Select the wireless network that you want to connect to, then click Connect.

3. You may need to key in the network security key for a secured wireless network, then click OK.

ASUS CM1530 5-5

5. The wireless connection is established successfully. The connection status is displayed and the network icon displays the connected status.

4. Wait while your computer is connecting to the wireless network.

ASUS CM1530 6-1

Chapter 6 Using the utilities

After launching the application, the AI Manager icon appears in the Windows taskbar. Right-click this icon to switch between the quick bar and the main window, and to launch the AI Manager either from the quick bar or taskbar.

ASUS AI Manager ASUS AI Manager is a utility which gives you quick and easy access to frequently-used applications.

Installing AI Manager To install AI Manager:

1. Place the support DVD in the optical drive. If Autorun is enabled, the Drivers installation wizard appears.

If Autorun is disabled, double-click the setup.exe file from the ASUS AI Manager folder in the support DVD.

2. Click the Utilities tab, then click ASUS AI Manager. 3. Follow the onscreen instructions to complete the installation.

Launching AI Manager To launch AI Manager from the Windows desktop, click Start > All Programs > ASUS > AI Manager > AI Manager 1.xx.xx. The AI Manager quick bar appears on the desktop.

6-2 Chapter 6: Using the utilities

AI Manager quick bar The AI Manager quick bar saves the desktop space and allows you to launch the ASUS utilities or display system information easily. Click any of the Main, My Favorites, Support or Information tab to display the menus contents.

Click the Maximize/restore button to switch between full window and quick bar. Click the Minimize button to keep the AI Manager on the taskbar. Click the Close button to quit the AI Manager.

Main The Main menu contains five utilities: AI Disk, AI Security, AI Boosting, and AI Probe. Click the arrow on the Main menu icon to browse through the utilities in the main menu.

AI Disk AI Disk allows you to easily clear temporary IE files, IE cookies, IE URLs, IE history, or the Recycle Bin. Click the AI Disk icon on the quick bar to display the full AI Disk window and select the items you want to clear. Click Apply when done.

Click to extend or restore Click to display items on the rightClick to display

items on the left

Main My Favorites

Support Information

Exit button Switch to main Window Add to ToolBar

ASUS CM1530 6-3

AI Security AI Security enables you to set a password to secure your devices, such as USB flash disks and CD/DVD disks, from unauthorized access.

To lock a device: 1. When using AI Security for the first time, you are asked to set a password. Key in

a password with at most 20 alphanumeric characters. 2. Confirm the password. 3. Key in the password hint (recommended). 4. When done, click Ok.

5. Select the device you want to lock, then click Apply. 6. Key in the password you have set previously, then click Ok.

To unlock the device: 1. Deselect the locked device, then click Apply. 2. Key in the password you have set previously, then click Ok.

To change the password: Click Change Password, then follow the onscreen instructions to change

password.

6-4 Chapter 6: Using the utilities

AI Booting AI Booting allows you to specify the boot device priority sequence.

To specify the boot sequence:

1. Select a device, then click the left/right button to specify the boot sequence. 2. When done, press Apply.

AI Probe AI Probe automatically detects and displays the motherboard and CPU temperatures, CPU fan speed, and the voltage output. You can adjust the values as you need.

Click the Temperature, Voltage, or Fan Speed tab, then select an item to enable and change the value by dragging the bar.

ASUS CM1530 6-5

My Favorites My Favorites allows you to add applications that you frequently use, saving you from searching for the applications throughout your computer.

To add an application:

1. Click Add, then locate the application you want to add to My Favorites. 2. Click Open on the file location window. The application is added to My Favorites list.

Right click on the application icon to launch, delete, or rename the selected application. You can also double click to launch the selected application.

Support Click any links on the Support window to go to the ASUS website, technical support website, download support website, or contact information.

6-6 Chapter 6: Using the utilities

Information Click the tab on the Information window to see the detailed information about your system, motherboard, CPU, BIOS, installed device(s), and memory.

ASUS Utility

CPU Level Up CPU Level Up allows you to overclock immediately with OC profile presets in Windows environment without the hassle of entering the BIOS setup.

To launch CPU Level Up:

1. Launch AI Manager. 2. Click Asus Utility, then double-click CPU Level Up.

ASUS CM1530 6-7

EPU-4 Engine ASUS EPU-4 Engine is an energy-efficient tool that provides you with a total system power-saving solution. It detects the current computer loading and intelligently adjusts the power usage in real-time. It automatically adjusts the power usage for the CPU, VGA card, hard drives, and CPU fan. It provides you with these modes to choose from: Auto, High Performance, and Maximum Power Saving Mode.

To launch EPU-4 Engine:

1. Launch AI Manager. 2. Click Asus Utility, then double-click EPU-4 Engine.

6-8 Chapter 6: Using the utilities

ASUS Update requires an Internet connection either through a network or an Internet Service Provider (ISP).

This utility is available in the support DVD that comes with the motherboard package.

ASUS Update The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows environment.

Installing ASUS Update To install ASUS Update:

1. Place the support DVD in the optical drive. The Drivers menu appears.

If Autorun is disabled, double-click the setup.exe file from the ASUS Update folder in the support DVD.

2. Click the Utilities tab, then click Install ASUS Update. 3. Follow the onscreen instructions to complete the installation.

Quit all Windows applications before you update the BIOS using this utility.

Updating the BIOS To update the BIOS:

1. From the Windows desktop, click Start > Programs > ASUS > ASUS Update > ASUS Update to launch the ASUS Update utility.

2. From the dropdown list, select any of the updating process:

Updating from the Internet a. Select Update BIOS from the Internet, then click Next. b. Select the ASUS FTP site nearest you to avoid network traffic, or click Auto

Select then click Next. c. From the FTP site, select the BIOS version that you wish to download then click

Next.

The ASUS Update utility is capable of updating itself through the Internet. Always update the utility to avail all its features.

Updating from a BIOS file a. Select Update BIOS from a file, then click Next. b. Locate the BIOS file from the Open window, then click Open. 3. Follow the onscreen instructions to complete the updating process.

ASUS CM1530 6-9

ASUS MyLogo2 The ASUS MyLogo2 utility lets you customize the boot logo. The boot logo is the image that appears on screen during the Power-On Self-Tests (POST). ASUS MyLogo2 is automatically installed when you install the ASUS Update utility from the Support DVD.

To launch ASUS MyLogo2:

1. Launch the ASUS Update utility. Refer to the section ASUS Update in this user manual for details.

2. Select Options from the drop down menu, then click Next. 3. Check the option Launch MyLogo to replace system boot logo before flashing

BIOS, then click Next. 4. Select Update BIOS from file from the drop down menu, then click Next. 5. When prompted, locate the new BIOS file, then click Next. ASUS MyLogo window

appears. 6. From the left window pane, locate the

image that you want to use as your boot logo. Click Next.

7. From the Ratio dropdown list, select your desired size for the boot logo. Click Next.

8. The system starts updating the BIOS and loading the new boot logo.

9. After the updating process, the system restarts and displays the new boot logo during POST.

Obtain the latest BIOS file from the ASUS website at www.asus.com.

You can create your own boot logo image in GIF file format.

6-10 Chapter 6: Using the utilities

Nero 9 Nero 9 allows you to create, copy, burn, edit, share, and update different kinds of data.

Installing Nero 9 To install Nero 9:

1. Insert the Nero 9 DVD into your optical drive. 2. If Autorun is enabled, the main menu appears automatically.

If Autorun is disabled, double-click the SeupX.exe file from the main directory of your Nero 9 DVD.

3. From the main menu, click Nero 9 Essentials.

ASUS CM1530 6-11

4. Select the language you want to use for Installation Wizard. Click Next.

5. Click Next to continue.

6. Tick I accept the License Conditions. When done, click Next.

6-12 Chapter 6: Using the utilities

7. Select Typical then click Next.

8. Tick Yes, I want to help by sending anonymous application data to Nero then click Next.

9. When done, click Exit.

ASUS CM1530 6-13

Burning files To burn files: 1. From the main menu, click Data Burning > Add.

2. Select the files that you want to burn. When done, click Add.

6-14 Chapter 6: Using the utilities

3. After selecting the files that you want to burn, click Burn to burn the files to a disc.

For more details about using Nero 9, refer to the Nero website at www.nero.com

Recovering your system The bundled Recovery DVD assists you in reinstalling the operating system and restoring it to its original working state.

All data will be lost during the recovery process. Before recovering the system, ensure that you back up all your data and take note of any customized settings such as network settings.

To recover your system:

1. Turn on your ASUS Desktop PC. When the ASUS logo appears, press to enter the Please select boot device menu.

2. Insert the recovery DVD into the optical drive and select the optical drive (CDROM: XXX) as the boot device. Press Enter and then press any key to continue.

3. Wait until the Hard-Disk Information screen appears. Select where to install a new system. Options are:

Recover system to a partition This option deletes only the partition you selected, allows you to keep other partitions,

and creates a new system partition as drive C. Select a partition and click NEXT. Recover system to entire HD This option deletes all partitions from your hard disk drive and creates a new system

partition as drive C. Select and click Yes.

ASUS CM1530 6-15

This recovery DVD is for ASUS Desktop PC only. DO NOT use it on other computers. Visit the ASUS website www.asus.com for any updates.

4. Tick I accept then click Next. 5. Follow the onscreen instructions to complete the recovery process. 6. Click OK on the confirmation message to eject the disc from the optical drive and the

system restarts. 7. After the system restarts, Windows 7 begins its system configurations. Follow the

onscreen instructions to complete the process, and the system automatically restarts.

Quickly recover your system 1. Turn on your ASUS Desktop PC. When the ASUS logo appears, press F9 to enter

System Recovery. 2. Windows is loading files is shown. Wait until the Recovery CD/DVD window

appears. 3. Follow the onscreen instructions to complete the recovery process. After the system

reboots, display resolution and system settings are restored to their default values.

ASUS CM1530 7-1

Chapter 7 Troubleshooting

Troubleshooting This chapter presents some problems you might encounter and the possible solutions.

? My computer cannot be powered on and the power LED on the front panel does not light up Check if your computer is properly connected. Check if the wall outlet is functioning. Check if the Power Supply Unit is switched on. Refer to the section Turning

your computer ON/OFF in Chapter 1.

? My computer hangs. Do the following to close the programs that are not responding: 1. Simultaneously press + + keys on the keyboard,

then click Start Task Manger. 2. Click Applications tab. 3. Select the program that is not responding, then click End Task. If the keyboard is not responding. Press and hold the Power button on the top

of your chassis until the computer shuts down. Then press the Power button to turn it on.

? I cannot connect to a wireless network using the ASUS WLAN Card (on selected models only)? Ensure that you enter the correct network security key for the wireless network

you want to connect to. Connect the external antennas (optional) to the antenna connectors on the

ASUS WLAN Card and place the antennas on the top of your computer chassis for the best wireless performance.

? The arrow keys on the number key pad are not working. Check if the Number Lock LED is off. When the Number Lock LED is on,

the keys on the number key pad are used to input numbers only. Press the Number Lock key to turn the LED off if you want to use the arrow keys on the number key pad.

7-2 Chapter 7: Troubleshooting

? No display on the monitor. Check if the monitor is powered on. Ensure that your monitor is properly connected to the video output port on your

computer. If your computer comes with a discrete graphics card, ensure that you connect

your monitor to a video output port on the discrete graphics card. Check if any of the pins on the monitor video connector is bent. If you discover

bent pins, replace the monitor video connector cable. Check if your monitor is plugged to a power source properly. Refer to the documentation that came with your monitor for more

troubleshooting information.

? When using multiple monitors, only one monitor has display. Ensure that the both monitors are powered on. During POST, only the monitor connected to the VGA port has display. The

dual display function works only under Windows. When a graphics card is installed on your computer, ensure that you connect

the monitors to the output port on the graphics card. Check if the multiple displays settings are correct. Refer to section

Connecting multiple external displays in Chapter 3 for details.

? My computer cannot detect my USB storage device. The first time you connect your USB storage device to your computer,

Windows automatically installs a driver for it. Wait for a while and go to My Computer to check if the USB storage device is detected.

Connect your USB storage device to another computer to test if the USB storage device is broken or malfunctions.

? I want to restore or undo changes to my computers system settings without affecting my personal files or data. The Windows System Restore feature allows you to restore or undo changes

to your computers system settings without affecting your personal data such as documents or photos. For more details, refer to the section Restoring your system in Chapter 2.

ASUS CM1530 7-3

? The picture on the HDTV is stretched. It is caused by the different resolutions of your monitor and your HDTV. Adjust

the screen resolution to fit your HDTV. To change the screen resolution: 1. Do any of the following to open the Screen Resolution setting screen:

Click > Control Panel > Appearance and Personalization > Display > Change display settings.

Right click anywhere on your Windows desktop. When the pop-up menu appears, click Personalize > Display > Change display settings.

2. Adjust the resolution. Refer to the documentation came with your HDTV for the resolution.

3. Click Apply or OK. Then click Keep Changes on the confirmation message.

? My speakers produce no sound. Ensure that you connect your speakers to the Line out port (lime) on the front

panel or the rear panel. Check if your speak is connected to a electrical source and turned on. Adjust your speakers volume. Ensure that your computers system sounds are not Muted.

If it is muted, the volume icon is displayed as . To enable the system sounds, click from the Windows notification area, then click .

If it is not muted, click and drag the slider to adjust the volume. Connect your speakers to another computer to test if the speakers arer

working properly.

? The DVD drive cannot read a disc. Check if the disc is placed with the label side facing up. Check if the disc is centered in the tray, especially for the discs with

non-standard size or shape. Check if the disc is scratched or damaged

Manualsnet FAQs

If you want to find out how the Essentio CM1530 ASUS works, you can view and download the ASUS Essentio CM1530 CPU User Manual on the Manualsnet website.

Yes, we have the User Manual for ASUS Essentio CM1530 as well as other ASUS manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a ASUS Essentio CM1530. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the ASUS Essentio CM1530 CPU User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This ASUS Essentio CM1530 CPU User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download ASUS Essentio CM1530 CPU User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print ASUS Essentio CM1530 CPU User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the ASUS Essentio CM1530 CPU User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.