ASUS D830MT CPU User Manual PDF

ASUS Desktop PC

User Guide

Desktop PC

D830MT D630MT

D831MT/MD800 D631MT/MD590

D830SF/SD800 D630SF/SD590

2

Copyright 2016 ASUSTeK Computer Inc. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (ASUS). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners benefit, without intent to infringe.

E12136

First Edition November 2016

3

Contents

Notices .......................................................................................................... 5 Safety information .......................................................................................... 8 Conventions used in this guide ...................................................................... 9 Where to find more information ..................................................................... 9 Package contents ........................................................................................ 10

Chapter 1 Getting started Welcome! ..................................................................................................... 11 Getting to know your computer .................................................................... 11 Setting up your computer ............................................................................. 24 Connecting multiple external displays ......................................................... 27 Turning your computer ON/OFF .................................................................. 29

Chapter 2 Connecting devices to your computer Connecting a USB storage device ............................................................... 31 Connecting microphone and speakers ........................................................ 33 Changing to the external audio output ......................................................... 37

Chapter 3 Using your computer Proper posture when using your Desktop PC.............................................. 39 Using the memory card reader .................................................................... 40 Using the optical drive (on selected models only) ....................................... 41 Configuring the USB ports using the BIOS .................................................. 43 Configuring the HDD security setting using the BIOS ................................. 44

Chapter 4 Connecting to the Internet Wired connection ......................................................................................... 45

Chapter 5 Using ASUS Business Manager ASUS Business Manager ............................................................................ 49

Chapter 6 Troubleshooting Troubleshooting ........................................................................................... 59

Appendix Windows 10 User Manual Starting for the first time ............................................................................... 69 Using the Windows 10 UI ........................................................................... 70 Keyboard shortcuts ...................................................................................... 74

4

Contents

ASUS contact information ASUS contact information ............................................................................ 76

5

Notices

ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions.

REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm

Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference; and

This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturers instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate this equipment.

Lithium Battery Warning CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instructions.

6

IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cut appareil numrique de la Classe B est conforme la norme NMB-003 du Canada. Cet appareil numrique de la Classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. Cet appareil est conforme aux normes CNR exemptes de licence dIndustrie Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer dinterfrences et (2) cet appareil doit accepter toute interfrence, y compris celles susceptibles de provoquer un fonctionnement non souhait de lappareil.

Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.

VCCI: Japan Compliance Statement

VCCI Class B Statement

KC: Korea Warning Statement

7

RF Equipment Notices

CE: European Community Compliance Statement The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0300 GHz). This wireless device complies with the R&TTE Directive.

Wireless Radio Use This device is restricted to indoor use when operating in the 5.15 to 5.25 GHz frequency band.

Exposure to Radio Frequency Energy The radiated output power of the Wi-Fi technology is below the FCC radio frequency exposure limits. Nevertheless, it is advised to use the wireless equipment in such a manner that the potential for human contact during normal operation is minimized.

FCC Bluetooth Wireless Compliance The antenna used with this transmitter must not be colocated or operated in conjunction with any other antenna or transmitter subject to the conditions of the FCC Grant.

Bluetooth Industry Canada Statement This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numrique de la Class B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada.

BSMI: Taiwan Wireless Statement

Japan RF Equipment Statement

KC (RF Equipment)

8

Safety information

Disconnect the AC power and peripherals before cleaning. Wipe the Desktop PC using a clean cellulose sponge or chamois cloth dampened with solution of nonabrasive detergent and a few drops of warm water then remove any extra moisture with a dry cloth.

DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.

DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.

DO NOT place or drop objects on top and do not shove any foreign objects into the Desktop PC.

DO NOT expose to strong magnetic or electrical fields.

DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.

Battery safety warning: DO NOT throw the battery in fire. DO NOT short circuit the contacts. DO NOT disassemble the battery.

Use this product in environments with ambient temperatures between 5C (41F) and 40C (104F).

DO NOT cover the vents on the Desktop PC to prevent the system from getting overheated.

DO NOT use damaged power cords, accessories, or other peripherals.

To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.

Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.

Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices.

All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 10 and 30 minutes of user inactivity. To wake

your computer, click the mouse or press any key on the keyboard.

Please visit http://www.energy.gov/powermanagement for detail information on power management and its benefits to the environment. In addition, please visit http://www. energystar.gov for detail information on the ENERGY STAR joint program.

*Note: Energy Star is NOT supported on Freedos and Linux-based products.

9

Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.

CAUTION: Information to prevent damage to the components when trying to complete a task.

NOTE: Tips and additional information to help you complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

Where to find more information Refer to the following sources for additional information and for product and software updates.

ASUS websites

The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS website www.asus.com.

ASUS Local Technical Support

Visit ASUS website at http://support.asus.com/contact for the contact information of local Technical Support Engineer.

10

Package contents

If any of the above items is damaged or missing, contact your retailer.

The illustrated items above are for reference only. Actual product specifications may vary with different models.

ASUS Desktop PC Keyboard x1 Mouse x1

Power cord x1 Support DVD x1 Recovery DVD x1 (Optional)

Installation Guide

ASUS mouse pad x 1 (Optional)

Installation Guide x1 Warranty card x1

Getting to know your computer

Illustrations are for reference only. The ports and their locations, and the chassis color vary with different models.

Welcome! Thank you for purchasing the ASUS Desktop PC! The ASUS Desktop PC provides cutting-edge performance, uncompromised reliability, and user-centric utilities. All these values are encapsulated in a stunningly futuristic and stylish system casing.

Read the ASUS Warranty Card before setting up your ASUS Desktop PC.

The Desktop PC does not support Windows 7 operating system. ASUS is not responsible for any loss or damage incurred by installing Window 7.

Be careful when handling the desktop PC to prevent the risk of injury.

ASUS Desktop PC 11

Chapter 1 Getting started

1. Power button. Press this button to turn on your computer.

2. Microphone port (pink). This port connects to a microphone.

3. Headphone port (lime). This port connects to a headphone or speaker.

4. Optical disk drive bay (optional). There is an optical disk drive in this bay.

5. Optical disk drive eject button. Press this button to eject the optical disk drive tray.

6. USB 3.0 ports. These Universal Serial Bus 3.0 (USB 3.0) ports connect to USB 3.0 devices such as a mouse, printer, scanner, camera, PDA, and others.

DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows operating system.

Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows OS environment and after the USB 3.0 driver installation.

USB 3.0 devices can only be used as data storage only.

We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices.

7. USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices such as a mouse, printer, scanner, camera, PDA, and others.

8. Express card slot (optional). Insert an ExpressCard into this slot.

9. Memory Stick (MS) / Memory Stick Pro (MS Pro) / Secure Digital (SD) card slots (optional). Insert a supported memory card into this slot.

SM.SD.MS-PRO

SM.SD.MS-PRO

Front USB 3.0 port 1 Front USB 3.0 port 2

Front USB 2.0 port 1 Front USB 2.0 port 2

D830MT / D630MT Front panel

12 Chapter 1: Getting started

E N

G L

IS H

E N

G L

IS H

D830MT / D630MT Rear panel

1. Power connector. Plug the power cord to this connector.

RATING: 100-120Vac, 50-60Hz, 8A (WW)

115Vac, 50-60Hz, 6A (TW)

220-230Vac, 50Hz, 3A (China)

2. PS/2 mouse port (green). This port is for a PS/2 mouse.

3. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.

4. DisplayPort. This port is for a DisplayPort-compatible devices.

5. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content.

6. USB 3.1 ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.1 devices.

DO NOT connect a keyboard / mouse to any USB 3.1 port when installing Windows operating system.

Due to USB 3.1 controller limitation, USB 3.1 devices can only be used under Windows OS environment and after the USB 3.1 driver installation.

USB 3.1 devices can only be used as data storage only.

We strongly recommend that you connect USB 3.1devices to USB 3.1 ports for faster and better performance for your USB 3.1 devices.

ASUS Desktop PC 13

E N

G L

IS H

E N

G L

IS H

Activity/Link LED Speed LED Status Description Status Description OFF No link OFF 10Mbps connection ORANGE Linked ORANGE 100Mbps connection BLINKING Data activity GREEN 1Gbps connection

LAN port

SPEED LED

ACT/LINK LED LAN port LED indications

Audio 2.1, 4.1, 5.1, or 7.1-channel configuration

Port Headset

2.1-channel 4.1-channel 5.1-channel 7.1-channel

Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out

Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out

Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center

Lime (Front panel) - - - Side Speaker Out

11. Expansion slot brackets. Remove the expansion slot bracket when installing an expansion card.

12. ASUS Graphics Card (on selected models only). The display output ports on this optional ASUS Graphics Card may vary with different models.

13. Kensington lock slot. The Kensington lock slot allows the PC to be secured using Kensington compatible PC security cables.

14. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.

7. USB 3.0 ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.0 devices.

DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows operating system.

Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows OS environment and after the USB 3.0 driver installation.

USB 3.0 devices can only be used as data storage only.

We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices.

8. Microphone port (pink). This port connects to a microphone.

9. Line Out port (lime). This port connects to a headphone or speaker. In a 4.1, 5.1, or 7.1-channel configuration, the function of this port becomes Front Speaker Out.

10. Line In port (light blue). This port connects to a tape, CD, DVD player, or other audio sources.

Refer to the audio configuration table below for the function of the audio ports in the 2.1, 4.1, 5.1, or 7.1-channel configuration.

14 Chapter 1: Getting started

E N

G L

IS H

E N

G L

IS H

15. Air vents. These vents allow air ventilation.

DO NOT block the air vents on the chassis. Always provide proper ventilation for your computer.

16. VGA port. This port is for VGA-compatible devices such as a VGA monitor.

17. Pad lock slot. This pad lock slot allows your PC to be secured using a standard pad lock.

18. Parallel port (optional). This 25-pin port connects a parallel printer, a scanner, or other devices.

19. Serial port (optional). This 9-pin COM port is for pointing devices or other serial devices.

ASUS Desktop PC 15

E N

G L

IS H

E N

G L

IS H

D831MT/MD800 / D631MT/MD590 Front Panel

1. 5.25 inch optical disk drive. There is a 5.25 inch optical disk drive in the bay.

2. Optical disk drive LED. This LED lights up when the optical disk drive operates.

3. 5.25 inch optical disk drive bay. The 5.25 inch optical disk drive bay is for 5.25 inch DVD-ROM / CD-RW / DVD-RW devices.

4. 3.5 inch drive bays. The 3.5 inch drive bays are for 3.5 inch hard disk drives / memory card readers.

5. USB 3.0 ports. These Universal Serial Bus 3.0 (USB 3.0) ports connect to USB 3.0 devices such as a mouse, printer, scanner, camera, PDA, and others.

DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows operating system.

Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows OS environment and after the USB 3.0 driver installation.

USB 3.0 devices can only be used as data storage only.

We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices.

6. Headphone port. This port connects to a headphone or speaker.

7. Microphone. This port connects to a microphone.

8. USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices such as a mouse, printer, scanner, camera, PDA, and others.

9. Power button. Press this button to turn on your computer.

10. Reset button. Press this button to reset your computer.

11. Optical disk drive eject button. Press this button to eject the optical disk drive tray.

16 Chapter 1: Getting started

E N

G L

IS H

E N

G L

IS H

D831MT/MD800 / D631MT/MD590 Rear Panel

1. Power switch. Switch to turn ON/OFF the power supply to your computer.

2. Power connector. Plug the power cord to this connector.

RATING: 100-120Vac, 50-60Hz, 8A (WW)

115Vac, 50-60Hz, 6A (TW)

220-230Vac, 50Hz, 3A (China)

3. PS/2 mouse port (green). This port is for a PS/2 mouse.

4. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.

5. DisplayPort. This port connects a display monitor or home-theater system.

DisplayPort cannot be converted to DVI and HDMI.

6. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content.

7. USB 3.1 ports. These Universal Serial Bus (USB) ports are for USB 3.1 devices.

DO NOT connect a keyboard / mouse to any USB 3.1 port when installing Windows operating system.

Due to USB 3.1 controller limitation, USB 3.1 devices can only be used under Windows OS environment and after the USB 3.1 driver installation.

USB 3.1 devices can only be used as data storage only.

We strongly recommend that you connect USB 3.1 devices to USB 3.1 ports for faster and better performance for your USB 3.1 devices.

ASUS Desktop PC 17

E N

G L

IS H

E N

G L

IS H

12. Expansion slot brackets. Remove the expansion slot bracket when installing an expansion card.

13. Parallel port (optional). This 25-pin port connects a parallel printer, a scanner, or other devices.

14. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.

LAN port LED indications

Activity/Link LED Speed LED Status Description Status Description OFF No link OFF 10Mbps connection ORANGE Linked ORANGE 100Mbps connection BLINKING Data activity GREEN 1Gbps connection

LAN port

SPEED LED

ACT/LINK LED

Audio 2.1, 4.1, 5.1, or 7.1-channel configuration

Port Headset

2.1-channel 4.1-channel 5.1-channel 7.1-channel

Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out

Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out

Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center

Lime (Front panel) - - - Side Speaker Out

8. USB 3.0 ports. These Universal Serial Bus 3.0 (USB 3.0) ports connect to USB 3.0 devices such as a mouse, printer, scanner, camera, PDA, and others.

DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows operating system.

Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows OS environment and after the USB 3.0 driver installation.

USB 3.0 devices can only be used as data storage only.

We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices.

9. Microphone port (pink). This port connects to a microphone.

10. Line Out port (lime). This port connects to a headphone or speaker. In a 4.1, 5.1, or 7.1-channel configuration, the function of this port becomes Front Speaker Out.

11. Line In port (light blue). This port connects to a tape, CD, DVD player, or other audio sources.

Refer to the audio configuration table below for the function of the audio ports in the 2.1, 4.1, 5.1, or 7.1-channel configuration.

18 Chapter 1: Getting started

E N

G L

IS H

E N

G L

IS H

15. Serial port (optional). This 9-pin COM port is for pointing devices or other serial devices.

16. VGA port. This port is for VGA-compatible devices such as a VGA monitor.

17. Air vents. These vents allow air ventilation.

DO NOT block the air vents on the chassis. Always provide proper ventilation for your computer.

ASUS Desktop PC 19

E N

G L

IS H

E N

G L

IS H

Front USB 3.0 port 1 Front USB 3.0 port 2 Front USB 2.0 port 1 Front USB 2.0 port 2

D830SF/SD800 / D630SF/SD590 Front Panel

1. Power button. Press this button to turn on your computer.

2. Optical disk drive eject button. Press this button to eject the optical disk drive tray.

3. 5.25 inch optical disk drive bay. The 5.25 inch optical disk drive bay is for 5.25 inch DVD-ROM / CD-RW / DVD-RW devices.

4. HDD LED. This LED lights up when the hard disk drive operates.

5. 3.5 inch drive bay. This 3.5 inch drive bay is for 3.5 inch hard disk drives / memory card readers.

6. USB 3.0 ports. These Universal Serial Bus 3.0 (USB 3.0) ports connect to USB 3.0 devices such as a mouse, printer, scanner, camera, PDA, and others.

DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows operating system.

Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows OS environment and after the USB 3.0 driver installation.

USB 3.0 devices can only be used as data storage only.

We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices.

7. USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices such as a mouse, printer, scanner, camera, PDA, and others.

8. Microphone. This port connects to a microphone.

9. Headphone port. This port connects to a headphone or speaker.

20 Chapter 1: Getting started

E N

G L

IS H

E N

G L

IS H

D830SF/SD800 / D630SF/SD590 Rear panel

1. PS/2 mouse port (green). This port is for a PS/2 mouse.

2. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.

3. DisplayPort. This port is for a DisplayPort-compatible devices.

4. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content.

5. USB 3.1 ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.1 devices.

DO NOT connect a keyboard / mouse to any USB 3.1 port when installing Windows operating system.

Due to USB 3.1 controller limitation, USB 3.1 devices can only be used under Windows OS environment and after the USB 3.1 driver installation.

USB 3.1 devices can only be used as data storage only.

We strongly recommend that you connect USB 3.1devices to USB 3.1 ports for faster and better performance for your USB 3.1 devices.

ASUS Desktop PC 21

E N

G L

IS H

E N

G L

IS H

10. Expansion slot brackets. Remove the expansion slot bracket when installing an expansion card.

11. Voltage selector. Use this switch to select the appropriate system input voltage according to the voltage supply in your area. If the voltage supply in your area is 100- 127V, set the switch to 115V. If the voltage supply in your area is 200-240V, set the switch to 230V.

Setting the switch to 115V in a 230V environment or 230V in a 115V environment will seriously damage the system!

80 Plus power supplies do not provide a voltage switch.

12. Air vents. These vents allow air ventilation.

DO NOT block the air vents on the chassis. Always provide proper ventilation for your computer.

13. Power connector. Plug the power cord to this connector.

Audio 2.1, 4.1, 5.1, or 7.1-channel configuration

Port Headset

2.1-channel 4.1-channel 5.1-channel 7.1-channel

Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out

Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out

Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center

Lime (Front panel) - - - Side Speaker Out

6. USB 3.0 ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.0 devices.

DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows operating system.

Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows OS environment and after the USB 3.0 driver installation.

USB 3.0 devices can only be used as data storage only.

We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices.

7. Microphone port (pink). This port connects to a microphone.

8. Line Out port (lime). This port connects to a headphone or speaker. In a 4.1, 5.1, or 7.1-channel configuration, the function of this port becomes Front Speaker Out.

9. Line In port (light blue). This port connects to a tape, CD, DVD player, or other audio sources.

Refer to the audio configuration table below for the function of the audio ports in the 2.1, 4.1, 5.1, or 7.1-channel configuration.

22 Chapter 1: Getting started

E N

G L

IS H

E N

G L

IS H

14. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.

LAN port LED indications

Activity/Link LED Speed LED Status Description Status Description OFF No link OFF 10Mbps connection ORANGE Linked ORANGE 100Mbps connection BLINKING Data activity GREEN 1Gbps connection

LAN port

SPEED LED

ACT/LINK LED

15. Pad lock slot. This pad lock slot allows your PC to be secured using a standard pad lock.

16. Kensington lock slot. The Kensington lock slot allows the PC to be secured using Kensington compatible PC security cables.

17. Parallel Port (optional). This 25-pin port connects a parallel printer, a scanner, or other devices.

18. VGA port. This port is for VGA-compatible devices such as a VGA monitor.

19. Serial port (optional). This 9-pin COM port is for pointing devices or other serial devices.

RATING: 115/230Vac, 50-60Hz, 6A/3A (WW)

115/230Vac, 50-60Hz, 6A/3A (TW)

220-230Vac, 50Hz, 3A (China)

ASUS Desktop PC 23

E N

G L

IS H

E N

G L

IS H

Setting up your computer This section guides you through connecting the main hardware devices, such as the external monitor, keyboard, mouse, and power cord, to your computer.

Connecting an external monitor

Using the ASUS Graphics Card (on selected models only) Connect your monitor to the display output port on the discrete ASUS Graphics Card.

To connect an external monitor using the ASUS Graphics Card:

1. Connect a monitor to a display output port on the ASUS Graphics Card.

2. Plug the monitor to a power source.

The display output ports on the ASUS Graphics Card may vary with different models.

D830MT

24 Chapter 1: Getting started

E N

G L

IS H

E N

G L

IS H

Using the onboard display output ports Connect your monitor to the onboard display output port.

To connect an external monitor using the onboard display output ports:

1. Connect a VGA monitor to the VGA port or a DVI-D monitor to the DVI-D port on the rear panel of your computer.

2. Plug the monitor to a power source.

D830MT

If your computer comes with an ASUS Graphics Card, the graphics card is set as the primary display device in the BIOS. Hence, connect your monitor to a display output port on the graphics card.

To connect multiple external monitors to your computer, refer to Connecting multiple external display in Chapter 2 of this guide for details.

ASUS Desktop PC 25

E N

G L

IS H

E N

G L

IS H

Connecting a USB keyboard and a USB mouse Connect a USB keyboard and a USB mouse to the USB ports on the rear panel of your computer.

`

D830MT

Connecting the power cord Connect one end of the power cord to the power connector on the rear panel of your computer and the other end to a power source.

D830MT

26 Chapter 1: Getting started

E N

G L

IS H

E N

G L

IS H

Connecting multiple external displays Your desktop PC may come with VGA, HDMI, or DVI ports and allows you to connect multiple external displays.

Setting up multiple displays When using multiple monitors, you are allowed to set display modes. You can use the additional monitor as a duplicate of your main display, or as an extension to enlarge your Windows desktop.

To set up multiple displays:

1. Turn off your computer.

2. Connect the two monitors to your computer and connect the power cords to the monitors. Refer to Setting up your computer section in Chapter 1 for details on how to connect a monitor to your computer.

SM.SD.MS-PRO

SM.SD.MS-PRO

D830MT / D630MT

D831MT/MD800 / D631MT/MD590

ASUS Desktop PC 27

E N

G L

IS H

E N

G L

IS H

3. Turn on your computer.

4. From the Start menu, click Settings > System > Display.

5. Configure the settings for your displays.

For some graphic cards, only the monitor that is set to be the primary display has display during POST. The dual display function works only under Windows.

D830SF/SD800 / D630SF/SD590

28 Chapter 1: Getting started

E N

G L

IS H

E N

G L

IS H

Turning your computer ON/OFF This section describes how to turn on/off your computer after setting up your computer.

Turning your computer ON To turn your computer ON:

1. Turn your monitor ON.

2. Press the power button on your computer.

3. Wait until the operating system loads automatically.

SM.SD.MS-PRO

SM.SD.MS-PRO

Power button

Power button

For details on shutting down your Desktop PC, refer to the Windows 10 User Guide, which can be found in this guide.

Power button

D830MT / D630MT D830SF/SD800 D630SF/SD590

D831MT/MD800 D631MT/MD590

ASUS Desktop PC 29

E N

G L

IS H

E N

G L

IS H

30 Chapter 1: Getting started

E N

G L

IS H

E N

G L

IS H

Connecting a USB storage device This desktop PC provides USB 2.0/1.1, USB 3.0 and USB 3.1 ports on both the front and rear panels. The USB ports allow you to connect USB devices such as storage devices.

To connect a USB storage device:

Insert the USB storage device to your computer.

Front panel

You can enable or disable the front and rear USB 2.0, USB 3.0 and USB 3.1 ports individually from the BIOS Setup. Refer to the Configuring the USB ports using the BIOS section in Chapter 3 of this user manual for details.

SM.SD.MS-PRO

SM.SD.MS-PRO

D830MT / D630MT D830SF/SD800 / D630SF/SD590

D831MT/MD800 / D631MT/MD590

ASUS Desktop PC 31

E N

G L

IS H

E N

G L

IS H

Chapter 2 Connecting devices to your computer

For details, refer to the section Removing a USB storage device in the Windows 10 User Guide, which can be found in this guide.

D830MT D830SF/SD800

D831MT/MD800

32 Chapter 2: Connecting devices to your computer

E N

G L

IS H

E N

G L

IS H

Rear panel

Connecting microphone and speakers This desktop PC comes with microphone ports and speaker ports on both the front and rear panels. The audio I/O ports located on the rear panel allow you to connect 2.1-channel, 4.1-channel, 5.1-channel, and 7.1-channel stereo speakers.

When your Desktop PC comes with an internal speaker, the audio output will be from the internal speaker.

When you connect an external audio device such as earphone or speaker, you need to enable the audio device output. For details, refer to the section Changing to the external audio output.

When you disconnect the audio device, you need to manually change the audio output to the internal speaker from the Control Panel.

Connecting Headphone and Mic

SM.SD.MS-PRO

SM.SD.MS-PRO

D830MT / D630MT

ASUS Desktop PC 33

E N

G L

IS H

E N

G L

IS H

D831MT/MD800 / D631MT/MD590

D830SF/SD800 / D630SF/SD590

34 Chapter 2: Connecting devices to your computer

E N

G L

IS H

E N

G L

IS H

Connecting 2.1-channel Speakers

LIN E

O U

T

Connecting 4.1-channel Speakers

LIN E

O U

T

ASUS Desktop PC 35

E N

G L

IS H

E N

G L

IS H

Connecting 5.1-channel Speakers

LIN E

O U

T

Connecting 7.1-channel Speakers

LIN E

O U

T

SM.SD.MS-PRO

SM.SD.MS-PRO

36 Chapter 2: Connecting devices to your computer

E N

G L

IS H

E N

G L

IS H

ASUS Desktop PC 37

E N

G L

IS H

E N

G L

IS H

Changing to the external audio output When you connect an external audio device to your Desktop PC, enable the audio device output to ensure a clear audio quality.

To change to the external audio output:

1. Connect an external audio device such as earphone or speaker to the rear Line Out port. The Audio Manager screen automatically pops up.

For the location of the rear Line Out port, refer to the section Getting to know your computer.

2. Tick Front Speaker Out, then click OK.

3. Tick Line In, then click OK. The audio output will now be from the external audio device.

The Audio Manager screenshots above are for reference only.

38 Chapter 2: Connecting devices to your computer

E N

G L

IS H

E N

G L

IS H

ASUS Desktop PC 39

E N

G L

IS H

E N

G L

IS H

Chapter 3 Using your computer

Proper posture when using your Desktop PC When using your Desktop PC, maintaining the proper posture is necessary to prevent strain to your wrists, hands, and other joints or muscles. This section provides you with tips on avoiding physical discomfort and possible injury while using and fully enjoying your Desktop PC.

Eye level to the top of the monitor screen

Foot rest 90 angles

To maintain the proper posture:

Position your computer chair to make sure that your elbows are at or slightly above the keyboard to get a comfortable typing position.

Adjust the height of your chair to make sure that your knees are slightly higher than your hips to relax the backs of your thighs. If necessary, use a footrest to raise the level of your knees.

Adjust the back of your chair so that the base of your spine is firmly supported and angled slightly backward.

Sit upright with your knees, elbows and hips at an approximately 90 angle when you are at the PC.

Place the monitor directly in front of you, and turn the top of the monitor screen even with your eye level so that your eyes look slightly downward.

Keep the mouse close to the keyboard, and if necessary, use a wrist rest for support to reduce the pressure on your wrists while typing.

Use your Desktop PC in a comfortably-lit area, and keep it away from sources of glare such as windows and straight sunlight.

Take regular mini-breaks from using your Desktop PC.

SM.SD.MS-PRO

SM.SD.MS-PRO

SM.SD.MS-PRO

Using the memory card reader Digital cameras and other digital imaging devices use memory cards to store digital picture or media files. The built-in memory card reader on the front panel of your system allows you to read from and write to different memory card drives. To use the memory card:

1. Insert the memory card into the card slot.

A memory card is keyed so that it fits in only one direction. DO NOT force a card into a slot to avoid damaging the card.

You can place media in one or more of the card slots and use each media independently. Place only one memory card in a slot at one time.

2. Select a program from the AutoPlay window to access your files.

On Windows 10, if AutoPlay is NOT enabled in your computer, click File Explorer from the Start menu, and then double-click the memory card icon to access the data on it.

Each card slot has its own drive icon which is displayed on the File Explorer screen.

3. When finished, right-click the memory card drive icon on the Computer screen, click Eject, and then remove the card.

Never remove cards while or immediately after reading, copying, formatting, or deleting data on the card or else data loss may occur.

To prevent data loss, use Safely Remove Hardware and Eject Media in the Windows notification area before removing the memory card.

40 Chapter 3: Using your computer

E N

G L

IS H

E N

G L

IS H

Using the optical drive (on selected models only)

SM.SD.MS-PRO

SM.SD.MS-PRO

1

3

2

D830MT / D630MT

D830SF/SD800 / D630SF/SD590

D831MT/MD800 / D631MT/MD590

1

2

3

3

2

1

ASUS Desktop PC 41

E N

G L

IS H

E N

G L

IS H

Inserting an optical disc To insert an optical disc:

1. While your system is on, press the eject button below the drive bay cover to open the tray.

2. Place the disc to the optical drive with the label side facing up.

3. Push the tray to close it.

4. Select a program from the AutoPlay window to access your files.

Removing an optical disc To remove an optical disc:

1. While the system is on, do either of the following to eject the tray:

Press the eject button below the drive bay cover.

Eject the tray from Windows 10 / Windows 10 Pro system:

On Windows 10, click File Explorer from the Start menu, right-click the CD/ DVD drive icon, and click Eject.

2. Remove the disc from the disc tray.

If AutoPlay is NOT enabled in your computer, to access the data on an optical disc:

On Windows 10, click File Explorer from the Start menu, then double-click the CD/ DVD drive icon.

42 Chapter 3: Using your computer

E N

G L

IS H

E N

G L

IS H

Configuring the USB ports using the BIOS You can enable or disable the front and rear USB 2.0, USB 3.0 and USB 3.1 ports from the BIOS Setup.

To disable or enable the front and rear USB 2.0, USB 3.0 and USB 3.1 ports:

1. Press to enter the BIOS Setup at startup.

2. From the BIOS Setup screen, click Advanced > USB Configuration > USB Single Port Control.

3. Select the USB port that you want to enable or disable.

4. Press to enable or disable the selected USB port.

5. Click Exit and select Save Changes & Reset to save the changes made.

Refer to Chapter 1 for the location of the USB ports.

ASUS Desktop PC 43

E N

G L

IS H

E N

G L

IS H

Configuring the HDD security setting using the BIOS You can set a password in the BIOS Setup to protect your HDD.

To set a password for your HDD from the BIOS Setup:

1. Press to enter the BIOS Setup at startup.

2. From the BIOS Setup EZ Mode screen, click Exit > Advanced Mode. From the Advanced Mode screen, click Main > HDDx: [name of HDD] to open the HDD Password screen.

3. Select the Set User Password item and press .

4. From the Create New Password box, key in a password, then press .

5. Confirm the password when prompted.

6. Click Exit and select Save Changes & Reset to save the changes made.

Take note of this password, which you would need to access the HDD.

To change the password for your HDD from the BIOS Setup:

1. Follow steps 1 and 2 of the previous section to open the HDD Password screen.

2. Select the Set User Password item and press .

3. From the Enter Current Password box, key in the current password, then press .

4. From the Create New Password box, key in a new password, then press .

5. Confirm the password when prompted.

6. Click Exit and select Save Changes & Reset to save the changes made.

To clear the user password, follow the same steps as in changing a user password, but press when prompted to create/confirm the password. After you clear the password, the Set User Password item on top of the screen shows Not Installed.

44 Chapter 3: Using your computer

E N

G L

IS H

E N

G L

IS H

Connecting via a DSL/cable modem To connect via a DSL/cable modem:

1. Set up your DSL/cable modem.

Wired connection Use an RJ-45 cable to connect your computer to a DSL/cable modem or a local area network (LAN).

2. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to a DSL/cable modem.

Refer to the documentation that came with your DSL/cable modem.

Modem

RJ-45 cable

D830MT/D630MT

ASUS Desktop PC 45

E N

G L

IS H

E N

G L

IS H

Chapter 4 Connecting to the Internet

Modem

RJ-45 cable

Modem

RJ-45 cable

D830SF/SD800 / D630SF/SD590

D831MT/MD800/D631MT/MD590

46 Chapter 4: Connecting to the Internet

E N

G L

IS H

E N

G L

IS H

Connecting via a local area network (LAN) To connect via a LAN:

1. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to your LAN.

RJ-45 cable LAN

D830MT/D630MT

LANRJ-45 cable

D831MT/MD800 / D631MT/MD590

ASUS Desktop PC 47

E N

G L

IS H

E N

G L

IS H

2. Turn on your computer.

3. Configure the necessary Internet connection settings.

For more details, refer to the section Configuring the network connection.

Contact your Internet Service Provider (ISP) for details or assistance in setting up your Internet connection.

RJ-45 cable LAN

D830SF/SD800 / D630SF/SD590

48 Chapter 4: Connecting to the Internet

E N

G L

IS H

E N

G L

IS H

ASUS Business Manager ASUS Manager provides a set of tools for customizing and maintaining your ASUS computer.

Installing ASUS Business Manager

1. Insert your ASUS support DVD into your optical drive.

2. On the support CD window, click Utilities > ASUS Business Manager.

3. On the ASUS Manager setup screen, select the applications you want to install.

4. Click Install.

5. The system will prompt you to reboot your system once installation is complete.

ASUS Desktop PC 49

E N

G L

IS H

E N

G L

IS H

Chapter 5 Using ASUS Business Manager

Starting ASUS Manager Launch ASUS Manager from the Start Menu by clicking Start > ASUS > ASUS Manager

Icon View and List View

ASUS Manager has an Icon View and List View. Click the List View icon to display a list of tools available for your system.

Icon View

List View

List View

50 Chapter 5: Using ASUS Business Manager

E N

G L

IS H

E N

G L

IS H

System The System Information screen displays hardware and software details about your computer.

Update Click Update on the main ASUS Manager screen to download and install hardware drivers, the latest BIOS, and updated ASUS applications.

ASUS Desktop PC 51

E N

G L

IS H

E N

G L

IS H

Security Click Security on the main ASUS Manager screen to access PC Cleanup and USB Lock utilities.

PC Cleanup PC Cleanup provides options to remove temporary and unnecessary files from your computer to free up hard drive space.

ASUS Secure Delete ASUS Secure Delete keeps your files secure by making deleted files completely irrecoverable using a simple drag-and-drop interface.

52 Chapter 5: Using ASUS Business Manager

E N

G L

IS H

E N

G L

IS H

1. Once ASUS Secure Delete is launched, do any of the following to add files to the deletion box:

Drag and drop the files to the deletion box.

2. To remove a file from the deletion list, select the file, then click .

Right-click the file then select ASUS Secure Delete.

To use ASUS Secure Delete:

3. Tick Delete the files listed in the recycle bin if you want to permanently delete all the files in the recycle bin.

4. Click Clear, and then click OK on the confirmation message to permanently delete all the files listed in the deletion box and the recycle bin (if selected in step 3).

ASUS Desktop PC 53

E N

G L

IS H

E N

G L

IS H

Backup & Recovery Click Recovery on the main ASUS Manager screen to begin Windows maintenance tasks such as system restoration, adjusting startup settings and repairing Windows with a recovery disk.

USB Lock The USB Lock feature secures your USB ports, card reader and optical drive from unwanted access by setting up a password.

54 Chapter 5: Using ASUS Business Manager

E N

G L

IS H

E N

G L

IS H

Power Click Power on the main ASUS Manager screen to configure power management. With Power Manager, you can specity time settings for system hibernation, sleep, display and hard drive activity.

Tool Click Tool on the main ASUS Manager screen to access the Support screen, Ai Booting or MyLogo.

Support Support lists links to ASUS support web sites and contact information.

ASUS Desktop PC 55

E N

G L

IS H

E N

G L

IS H

Ai Booting Ai Booting displays a list of bootable storage devices. Select a device and click the left/right buttons to modify the boot sequence.

MyLogo ASUS MyLogo allows you to customize the boot logo. The boot logo is the image that appears on screen during the Power-On Self-Tests (POST).

56 Chapter 5: Using ASUS Business Manager

E N

G L

IS H

E N

G L

IS H

Changing the BIOS boot logo

1. Select any of the options, then click Next:

Change the BIOS boot logo and update the BIOS.

Change the BIOS boot logo only.

Before selecting the first option, download the BIOS file to your computer using ASUS Update.

2. Click Browse to locate the picture file that you want to use as the boot logo (and the downloaded BIOS if required) and then click Run.

3. Follow the onscreen instructions to complete the process.

ASUS Desktop PC 57

E N

G L

IS H

E N

G L

IS H

58 Chapter 5: Using ASUS Business Manager

E N

G L

IS H

E N

G L

IS H

ASUS Desktop PC 59

E N

G L

IS H

E N

G L

IS H

Chapter 6 Troubleshooting

Troubleshooting This chapter presents some problems you might encounter and the possible solutions.

? My computer cannot be powered on and the power LED on the front panel does not light up.

Check if your computer is properly connected.

Check if the wall outlet is functioning.

Check if the Power Supply Unit is switched on. Refer to the section Turning your computer ON/OFF in Chapter 1.

? My computer hangs.

Do the following to close the programs that are not responding:

1. Simultaneously press + + keys on the keyboard, then click Task Manager.

2. Do the following based on the operating system:

On Windows 10:

Under Task Manager in the Processes tab, select the program that is not responding, then click End Task.

If the keyboard is not responding. Press and hold the Power button on the top of your chassis until the computer shuts down. Then press the Power button to turn it on.

? I cannot connect to a wireless network using the ASUS WLAN Card (on selected models only)?

Ensure that you enter the correct network security key for the wireless network you want to connect to.

Connect the external antennas (optional) to the antenna connectors on the ASUS WLAN Card and place the antennas on the top of your computer chassis for the best wireless performance.

? The arrow keys on the number key pad are not working.

Check if the Number Lock LED is off. When the Number Lock LED is on, the keys on the number key pad are used to input numbers only. Press the Number Lock key to turn the LED off if you want to use the arrow keys on the number key pad.

? No display on the monitor.

Check if the monitor is powered on.

Ensure that your monitor is properly connected to the video output port on your computer.

If your computer comes with a discrete graphics card, ensure that you connect your monitor to a video output port on the discrete graphics card.

Check if any of the pins on the monitor video connector is bent. If you discover bent pins, replace the monitor video connector cable.

Check if your monitor is plugged to a power source properly.

Refer to the documentation that came with your monitor for more troubleshooting information.

? When using multiple monitors, only one monitor has display.

Ensure that the both monitors are powered on.

During POST, only the monitor connected to the VGA port has display. The dual display function works only under Windows.

When a graphics card is installed on your computer, ensure that you connect the monitors to the output port on the graphics card.

Check if the multiple displays settings are correct.

? My computer cannot detect my USB storage device.

The first time you connect your USB storage device to your computer, Windows automatically installs a driver for it. Wait for a while and go to My Computer to check if the USB storage device is detected.

Connect your USB storage device to another computer to test if the USB storage device is broken or malfunctions.

60 Chapter 6: Troubleshooting

E N

G L

IS H

E N

G L

IS H

? I want to restore or undo changes to my computers system settings without affecting my personal files or data.

On Windows 10:

You can use Windows 10 recovery option to refresh or reset your computers system settings. To use the refresh option, click Settings > Update & recovery > Reset this PC from the Start menu, select Keep my files, wait for several seconds and click Next to continue or Cancel to quit. To use the reset option, click Settings > Update & recovery > Reset this PC from the Start menu, select Remove everything > Only the drive where Windows is installed > Just remove my files, and click Reset.

By default, your personal files, apps and settings are stored in the system volume (eg. C:\), ensure to move them to a data volume (eg. D:\ or E:\) before resetting your system.

? The picture on the HDTV is distorted.

It is caused by the different resolutions of your monitor and your HDTV. Adjust the screen resolution to fit your HDTV. To change the screen resolution:

On Windows 10

From the Start menu, click Settings > System > Display.

ASUS Desktop PC 61

E N

G L

IS H

E N

G L

IS H

? My speakers produce no sound.

Ensure that you connect your speakers to the Line out port on the front panel or the rear panel.

Check if your speaker is connected to an electrical source and turned on.

Adjust your speakers volume.

Ensure that your computers system sounds are not Muted. If it is muted, the volume icon is displayed as . To enable the system sounds, click from the Windows notification area, then click .

If it is not muted, click and drag the slider to adjust the volume.

Connect your speakers to another computer to test if the speakers are working properly.

? The DVD drive cannot read a disc.

Check if the disc is placed with the label side facing up.

Check if the disc is centered in the tray, especially for the discs with non-standard size or shape.

Check if the disc is scratched or damaged.

? The DVD drive eject button is not responding.

1. On Windows 10, from the Start menu, click File Explorer.

2. Right-click , then click Eject from the menu.

62 Chapter 6: Troubleshooting

E N

G L

IS H

E N

G L

IS H

Power Problem Possible Cause Action

No power (The power indicator is off)

Incorrect power voltage

Set your computers power voltage switch to your areas power requirements.

Adjust the voltage settings. Ensure that the power cord is unplugged from the power outlet.

Your computer is not turned on.

Press the power key on the front panel to ensure that your computer is turned on.

Your computers power cord is not properly connected.

Ensure that the power cord is properly connected.

Use other compatible power cord.

PSU (Power supply unit) problems

Contact the ASUS Service Center about installing another PSU on your computer.

ASUS Desktop PC 63

E N

G L

IS H

E N

G L

IS H

64 Chapter 6: Troubleshooting

E N

G L

IS H

E N

G L

IS H

Display

Problem Possible Cause Action

No display output after turning the computer on (Black screen)

The signal cable is not connected to the correct VGA port on your computer.

Connect the signal cable to the correct display port (onboard VGA or discrete VGA port).

If you are using a discrete VGA card, connect the signal cable to the discrete VGA port.

Signal cable problems Try connecting to another monitor.

LAN

Problem Possible Cause Action

Cannot access the Internet

The LAN cable is not connected.

Connect the LAN cable to your computer.

LAN cable problems

Ensure the LAN LED is on. If not, try another LAN cable. If it still does not work, contact the ASUS service center.

Your computer is not properly connected to a router or hub.

Ensure that your computer is properly connected to a router or hub.

Network settings Contact your Internet Service Provider (ISP) for the correct LAN settings.

Problems caused by the anti-virus software Close the anti-virus software.

Driver problems Reinstall the LAN driver

ASUS Desktop PC 65

E N

G L

IS H

E N

G L

IS H

Audio

Problem Possible Cause Action

No Audio

Speaker or headphone is connected to the wrong port.

Refer to your computers user manual for the correct port.

Disconnect and reconnect the speaker to your computer.

Speaker or headphone does not work.

Try using another speaker or headphone.

The front and back audio ports do not work.

Try both the front and back audio ports. If one port failed, check if the port is set to multi-channel.

Driver problems Reinstall the audio driver

System

Problem Possible Cause Action

System speed is too slow

Too many programs are running. Close some of the programs.

Computer virus attack

Use an anti-virus software to scan for viruses and repair your computer.

Reinstall the operating system.

The system often hangs or freezes.

Hard disk drive failure

Send the damaged hard disk drive to ASUS Service Center for servicing.

Replace with a new hard disk drive.

Memory module problems

Replace with compatible memory modules.

Remove the extra memory modules that you have installed, then try again.

Contact the ASUS Service Center for assistance.

There is not enough air ventilation for your computer.

Move your computer to an area with better air flow.

Incompatible software are installed.

Reinstall the OS and reinstall compatible software.

66 Chapter 6: Troubleshooting

E N

G L

IS H

E N

G L

IS H

CPU

Problem Possible Cause Action

Too noisy right after turning on the computer.

Your computer is booting up.

It is normal. The fan runs on its full speed when the computer is powering on. The fan slows down after entering the OS.

The BIOS settings have been changed.

Restore the BIOS to its default settings.

Old BIOS version

Update the BIOS to the latest version. Visit the ASUS Support site at http://support.asus.com to download the latest BIOS versions.

Computer is too noisy when in use.

The CPU fan has been replaced.

Ensure that you are using a compatible or ASUS-recommended CPU fan.

There is not enough air ventilation for the computer.

Ensure that your computer is working in an area with good air flow.

The system temperature is too high.

Update the BIOS. If you know how to reinstall the

motherboard, try to clean the inner space of the chassis.

Contact the ASUS Service Center for assistance.

If the problem still persists, refer to your Desktop PCs warranty card and contact the ASUS Service Center. Visit the ASUS Support site at http://support.asus.com for the service center information.

ASUS Desktop PC Windows 10 User Manual

E10435 First Edition May 2015 Copyright ASUSTeK Computer Inc. All Rights Reserved

Appendix Windows 10 User Manual

EN G

LISH

EN G

LI SH

ASUS Desktop PC 69

EN G

LISH

EN G

LI SH

Starting for the first time When you start your computer for the first time, a series of screens appear to guide you in configuring the basic settings of your Windows 10 operating system.

To start your Desktop PC for the first time:

When you start your computer for the first time, a series of screens appear to guide you in configuring the basic settings of your Windows 10 operating system.

To start your Desktop PC for the first time:

1. Press the power button on your Desktop PC. Wait for a few minutes until the setup screen appears.

2. From the setup screen, pick your region and language that you want to use on your desktop PC.

3. Carefully read the License Terms, then tap I Accept.

4. Follow the onscreen instructions to configure the following basic items:

Personalize

Getonline

Settings

Youraccount

5. Wait until Windows 10 finishes installing the apps and system settings. After the installation, the Windows 10 desktop appears.

70 Windows 10 User Manual

EN G

LISH

EN G

LI SHClick your account name to change the

picture, sign out of your account, or lock your Desktop PC

Click to display all the apps

Click to put on sleep mode, shut down, or restart your desktop PC

Click to expand the Start screen

Click to launch the Start menu Pin on or launch a tiled-format app from the Start screen

Pin on or launch an app from the taskbar

Start menu Windows 10 brings back the Start menu with some enhancements, such as the space that you can customizewithyourfavoriteapps,people,orwebsites.

YoucanlaunchtheStartmenuintwoways:

ClicktheStartbuttonfromthelower-leftcornerofthetaskbar.

PresstheWindows Start key on your keyboard.

Pinning apps to the Start screen or taskbar To pin an app to the Start screen or taskbar:

1. From the Start menu, click All apps, then select the app that you want to pin.

2. Click Pin to Start or Pin to taskbar to pin your selected app to the Start screen or taskbar. YoucanalsodragthendropanapptotheStartScreenortaskbartopinit.

Using the Windows 10 UI The Windows10UserInterface(UI)includesthefavoriteStartmenuandthetiled-formattedStart screen. It includes the following features you can use while working on your Desktop PC.

ASUS Desktop PC 71

EN G

LISH

EN G

LI SH

Start screen TheStartscreen,whichappearstogetherwiththeStartmenu,helpsorganizealltheappsyouneed injustoneplace.TheappsontheStartscreenaredisplayedontiled-formatforeasyaccess.

Some apps require signing in to your Microsoft account before they are fully launched.

Click to restore the Start screen

Moving apps on the Start screen YoucanmoveappsfromtheStartscreensimplythroughdragginganddroppingtheapptoyour preferred location.

Unpinning apps from the Start screen TounpinanappfromtheStartscreen,right-clickontheapptoactivateitssettingsbarthenclick Unpin from Start.

72 Windows 10 User Manual

EN G

LISH

EN G

LI SH

Taskbar Windows 10 comes with the standard taskbar, which keeps all your currently running apps or items in the background.

Unpinning apps from the taskbar

1. FromtheStartscreenortaskbar,right-clicktheappyouwanttounpin.

2. Click Unpin from Start or Unpin this program from taskbar to remove the app from the Start screen or taskbar.

Using the Task View

When you have several running apps, you can click from the taskbar to display all your running apps, and click on an app or item to launch it.

If task view is disabled, click > Show Task View button to display the task view icon .

ASUS Desktop PC 73

EN G

LISH

EN G

LI SH

Snap feature The Snap feature displays about four apps or more in one screen, allowing you to work or switch among apps.

Using Snap Use your Desktop PCs mouse or keyboard to activate Snap onscreen.

Using your mouse

a) Launch an app, then drag and release on a screen corner to snap it in place.

b) Snap another app to your preferred location on the screen.

Using your keyboard

a) Launch an app, press and the arrow keys to select the direction where you want to snap the app in place.

b) Snap another app using and the arrow keys.

74 Windows 10 User Manual

EN G

LISH

EN G

LI SH

Keyboard shortcuts Using your keyboard, you can also use the following shortcuts to help you launch apps and navigate Windows 10.

Switches between the Start screen and the last running app

+ Launches the desktop

+ Launches File Explorer

+ or

+

Activates the File search function

+ Launches Share

+ Launches Settings

+ Launches Media Connect

+ Activates the Lock screen

+ Hides all currently active screens to the taskbar

+

YourdesktopPCismirroredtoyoursecondarymonitor

+ Launches Cortana

+ Launches the Run window

+ Launches Ease of Access Center

+ Launches a menu box of Windows tools

ASUS Desktop PC 75

EN G

LISH

EN G

LI SH

3. Follow the onscreen instructions to complete the reinstallation and reset process.

Removing everything and reinstalling Windows 10 Restoring your PC to its original factory settings can be done using the Remove everything and reinstall options in PC Settings. Refer to the steps below to use this option.

Back up all your data before using this option.

This process may take a while to complete.

1. From the Start menu, click Settings > Update & security > Recovery.

2. Scroll down to view the Remove everything and reinstall Windows option. Under this option, click Get started.

+ <+> Launchesthemagnifierandzoomsinyourscreen.

+<-> Zooms out your screen.

+ Opens the Narrator Settings.

76 Windows 10 User Manual

EN G

LISH

EN G

LI SH

ASUS contact information

ASUSTeK COMPUTER INC. Address 15Li-TeRoad,Peitou,Taipei,Taiwan11259 Telephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www.asus.com.tw

Technical Support Telephone +86-21-38429911 Online support support.asus.com

ASUS COMPUTER INTERNATIONAL (America) Address 800 Corporate Way, Fremont, CA 94539, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site usa.asus.com

Technical Support Telephone +1-812-282-2787 Supportfax +1-812-284-0883 Online support support.asus.com

ASUS COMPUTER GmbH (Germany and Aust