Contents

Apple PowerBook G4 15 Inch Original Manual PDF

1 of 88
1 of 88

Summary of Content for Apple PowerBook G4 15 Inch Original Manual PDF

Getting Started With Your PowerBook G4

Includes setup, expansion, and troubleshooting information for PowerBook G4 computers

LL2010.Book Page 1 Thursday, March 15, 2001 4:28 PM

K

Apple Computer, Inc.

2001 Apple Computer, Inc. All rights reserved.

Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple.

The Apple logo is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Use of the keyboard Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws.

Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for printing or clerical errors.

Apple Computer, Inc. 1 Innite Loop Cupertino, CA 95014-2084 408-996-1010 http://www.apple.com

Apple, the Apple logo, AppleTalk, FireWire, Mac, Macintosh, the Mac OS logo, PowerBook, QuickTime, and Sherlock are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

AirPort, the Apple Store, and iMovie are trademarks of Apple Computer, Inc.

ENERGY STAR

is a U.S. registered trademark.

PowerPC is a trademark of International Business Machines Corporation, used under license therefrom.

Other company and product names mentioned herein are trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the performance or use of these products.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. Condential Unpublished Works,

19921997 Dolby Laboratories, Inc. All rights reserved.

The product described in this manual incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093 licensed for limited viewing uses only.

Simultaneously published in the United States and Canada.

LL2010.Book Page 2 Thursday, March 15, 2001 4:28 PM

LL2010.Book Page 3 Thursday, March 15, 2001 4:28 PM

Contents 1 Getting Started 5

Plugging In the Computer 6

Opening the Display 7

Turning the Computer On 8

Moving Items on the Screen 9

Adjusting the Internal Display 10

Where to Go From Here 12

Calibrating Your Battery for Best Performance 12

What to Do When You Are Finished Working 13

2 Getting to Know Your Computer 15

Basic Features of Your PowerBook 16

Additional Features of Your PowerBook 18

Inside Your PowerBook 20

Sherlock 2Your Internet Search Detective 22

iToolsFree Internet Services for Mac Users 24

Apple.comYour Starting Place on the World Wide Web 26

QuickTimeAudio and Video on the Internet 28

iMovie 2Create and Edit Your Own Digital Movies 30

iTunesDigital Music For Your Mac 32

Auto UpdatingAutomatically Keep Your Mac on the Cutting Edge 34

Multiple UsersTurn One Mac Into Many 36

Mac HelpAnswers to All Your Macintosh Questions 38

3 Using Your Computer 39

Universal Serial Bus (USB) 40

3

LL2010.Book Page 4 Thursday, March 15, 2001 4:28 PM

FireWire 42

PC Cards 44

AirPort Wireless Internet and Networking 45

Ethernet (10/100Base-T) 46

Infrared (IrDA) 47

External Video Support ( VGA and S-Video) 48

Battery 51

DVD Drive 54

Keyboard Controls and Programmable Function Keys 56

Security Slot and Keyboard Lock 58

4 Working Inside Your Computer 59

Installing Additional Memory 60

Installing an AirPort Card 67

5 Troubleshooting 75

Information in This Chapter 75

Problems That Prevent You From Using Your Computer 76

Other Problems 78

Locating Your Product Serial Number 78

Appendix A Specifications 79

Apple System Proler 79

PowerBook Specications 80

Appendix B Care, Use, and Safety Information 83

Cleaning Your PowerBook 83

Carrying Your PowerBook 83

Storing Your PowerBook 83

Safety Instructions for Setting Up and Using Your Computer 84

General Safety Instructions 85

Ergonomics 86

4 Contents

C H A P T E R

1

LL2010.Book Page 5 Thursday, March 15, 2001 4:28 PM

1 Getting Started Your PowerBook has been designed so that you can set it up quickly and start using it right away. If you have never used a PowerBook or are new to Macintosh computers, read this section for instructions on getting started and where to get more information.

If you are an experienced user, you may already know enough to get started. Be sure to look over the information in Chapter 2, Getting to Know Your Computer, to nd out about the new features of this PowerBook.

Composite-to-S-video cable Power cordPower adapter

Phone cord

Important Read all the installation instructions and safety information (see page 83) carefully before you plug your computer into a wall socket.

5

LL2010.Book Page 6 Thursday, March 15, 2001 4:28 PM

Plugging In the Computer

Plugging in the power adapter recharges the computers battery. You should plug in the power adapter in case the battery has been drained during shipping or storage.

1 Plug one end of the power cord into the power adapter and the other end into an outlet.

2 Plug the power adapter plug into the power adapter port (marked with the icon ) on the back of the computer.

Connecting the Internal Modem

If you want to connect to the Internet right away, connect one end of the phone cord to the internal modem port (marked with the icon W) and the other end to an analog telephone line (the type of telephone line found in most residences).

G

W

Power cord Telephone cord

Internal modemPower adapter plug Power adapter port W

Power adapter

Warning Do not connect a digital telephone line to the modem, because the wrong type of line could damage the modem.

6 Chapter 1

LL2010.Book Page 7 Thursday, March 15, 2001 4:28 PM

Opening the Display

1 Push the display release button.

2 Open the display and position it at a comfortable viewing angle.

Getting Started 7

LL2010.Book Page 8 Thursday, March 15, 2001 4:28 PM

Turning the Computer On

To turn on the computer, press the Power button (). You should hear a tone when you turn on the computer. It takes the computer a few moments to start up.

Power button

Problems Turning the Computer On?

Nothing happens when you press the Power button.

m The battery may be drained. Make sure that you plugged in the power adapter, and that the adapter is rmly connected to both the computer and a power source.

m If the computer still doesnt start up when you press the Power button, use the tip of a pen to press the reset button (see page 18) on the back of the computer. Wait a few seconds and then press the Power button again.

m If the computer still doesnt start up, see page 77.

There is a slight delay before the computer starts up.

m This is normal. When you press the Power button, the PowerBook checks its memory before it starts up. The more memory installed, the longer the delay.

You see a picture of a disk or a folder with a blinking question mark.

m This icon usually means that the computer cant nd system software on the hard disk or any disks attached to the computer. You may need to reinstall system software. See page 76.

8 Chapter 1

LL2010.Book Page 9 Thursday, March 15, 2001 4:28 PM

Moving Items on the Screen

You use your PowerBook trackpad to move items and select items on the screen, much as you use a mouse with a desktop computer. To move the arrow pointer on the screen, slide your nger across the trackpad. To select, click, or double-click an item on the screen, use the trackpad button.

Note: Instead of using the trackpad button, you can click and double-click directly on the trackpad. You turn on this option in the Trackpad control panel.

The trackpad is sensitive to how quickly you move your nger. To move the pointer a short distance across the screen, move your nger slowly across the trackpad. The faster you move your nger, the farther the pointer moves on the screen.

Trackpad Trackpad button

Tips for Using the Trackpad

For best results when using the trackpad, keep in mind these tips:

m Use only one nger. Do not use a pen or any other object.

m Keep your nger and the trackpad dry. If the trackpad becomes moist from humidity or condensation, gently wipe it with a clean cloth before you use it.

m Never use any kind of cleaning solution on the trackpad.

For more information on using the trackpad, see Mac Help or Mac Tutorials, available in the Help menu.

Getting Started 9

LL2010.Book Page 10 Thursday, March 15, 2001 4:28 PM

Adjusting the Internal Display

Before you begin working with your new PowerBook, you may need to adjust your display so that items on the screen are easy to see.

Adjusting the Brightness

Use the keys labeled with the icon to adjust screen brightness.

Brightness controls

10 Chapter 1

LL2010.Book Page 11 Thursday, March 15, 2001 4:28 PM

Adjusting the Display Resolution

You can increase the size of images on your display by switching from the standard resolution to a scaled resolution. Click the Resolution icon in the Control Strip.

About the Resolutions Supported by the Built-In Display

Your PowerBook has a wide screen display with a native resolution of 1152 x 768 that also supports standard resolutions such as 1024 x 768. When you use a standard resolution, a black band appears on each side of the display.

Note: Most applications automatically switch to the best resolution for the application.

You may want to use a standard resolution when mirroring your display on an external monitor or when using certain applications (such as games or presentation software) that are designed for a standard resolution.

Note: If you use an application designed for a standard resolution and do not want to see the black bands, you can choose the stretched version of the resolution to stretch the image to cover the entire screen and eliminate the black bands. To access additional stretched resolutions, hold down the Control key when you click the Resolution icon in the Control Strip.

You can choose a resolution of 896 x 600 or smaller in the Control Strip and Monitors control panel. These are known as scaled resolutions. When you switch to a scaled resolution, items on the screen appear larger, making them easier to see. However, scaled resolutions may not be as sharp as the displays native resolution.

Resolution icon

Getting Started 11

LL2010.Book Page 12 Thursday, March 15, 2001 4:28 PM

Where to Go From Here

Youve done everything you need to get your PowerBook up and running. The rst time that you turn your computer on, the Macintosh Setup Assistant takes you through the process of conguring your computer and setting up for the Internet.

If you would like additional information, see the following:

Calibrating Your Battery for Best Performance

To get the longest running time from your PowerBook battery, let the battery run down and then fully charge it one time. Follow these steps:

1 Plug in the power adapter and fully charge your PowerBook battery until the battery indicator lights and the onscreen meter (see page 52) indicate that the battery is fully charged.

2 Disconnect the power adapter and use your PowerBook until you see the rst low battery warning.

3 Connect the power adapter and leave it connected until the battery is fully charged again.

To learn about... See...

Shutting down your computer or putting it to sleep

What to Do When You Are Finished Working on page 13.

What you can do with the hardware and software features of your PowerBook

Chapter 2, Getting to Know Your Computer.

The additional information available in the onscreen help

Mac HelpAnswers to All Your Macintosh Questions on page 38.

Using a specic feature of your PowerBook Chapter 3, Using Your Computer.

Installing memory or an AirPort Card Chapter 4, Working Inside Your Computer.

What to do if you have a problem with your PowerBook

Chapter 5, Troubleshooting.

Important You only have to fully discharge and then charge your battery once to calibrate it. After that, you can connect and disconnect the power adapter when the battery is at any charge level.

12 Chapter 1

LL2010.Book Page 13 Thursday, March 15, 2001 4:28 PM

What to Do When You Are Finished Working

When you have nished working with your PowerBook, you have two options.

Put Your PowerBook to Sleep

If you will only be away from your PowerBook for a short time, put the computer to sleep. When the computer is in sleep, you can quickly wake it and bypass the startup process. When the computer is in sleep, its screen is dark and a small white light below the display pulsates.

To put the computer to sleep quickly, do one of the following:

m Close the display.

m Choose Sleep from the Special menu.

To wake the computer:

m If the display is closed, open it. Your PowerBook wakes from sleep when you open the display. ( You can turn off this option in the Energy Saver control panel.)

m If the display is already open, press the Power button () or any key on the keyboard.

Shut Down Your PowerBook

If you will not use your PowerBook for a day or two, shut it down. Do one of the following:

m Choose Shut Down from the Special menu.

m Press the Power button and click Shut Down in the dialog box that appears on the screen:

Note: If you plan to store your PowerBook for an extended period of time, see Storing Your PowerBook on page 83 for additional steps to prevent your battery from completely draining.

Warning Wait a few seconds until the sleep light starts pulsating (indicating that the computer is in sleep and the hard disk has stopped spinning) before you move your PowerBook. Moving your computer while the hard disk is spinning can damage your computer.

Getting Started 13

LL2010.Book Page 14 Thursday, March 15, 2001 4:28 PM

C H A P T E R

2

LL2010.Book Page 15 Thursday, March 15, 2001 4:28 PM

2 Getting to Know Your Computer If youre eager to get started and want to try out a few things on your PowerBook, this chapter is for you. It provides an overview of your computers hardware and software features along with the unique Internet services available to Mac owners.

Out of the box, your PowerBook is a full-featured notebook computer. It includes the latest in computer technology such as a PowerPC G4 processor, FireWire, USB, and support for AirPort wireless Internet and networking. On top of this hardware runs the Mac OS operating system. Included with the Mac OS are powerful features that allow you to use the Internet to watch video, research information, shop, and even update your software automatically.

With your PowerBook you also get iMovie, an easy-to-use digital video editing application that lets you use your PowerBook to create desktop movies. Simply connect a digital video camera to the FireWire port on your PowerBook, open iMovie, and youre ready to create your own movies.

On top of all this, Apple provides you with free Internet services that give you storage space on the Internet, a personal Mac.com email address, tools to easily create your own Web site or iMovie theater, and more.

If You Are New to the Mac

If this is your rst Macintosh computer, start with the Mac Tutorials (see page 38) to learn how to use the trackpad to move items on the screen, go to a site on the World Wide Web, and more. To access the tutorials, choose Mac Tutorials from the Help menu.

In This Chapter

Here youll nd a great selection of your computers features presented and briey explained. Take a test drive and see what your PowerBook can do.

Note: Because Apple frequently releases new versions and updates to its system software, applications, and Internet site, images shown in this manual may be slightly different from what you see on your screen.

15

LL2010.Book Page 16 Thursday, March 15, 2001 4:28 PM

Basic Features of Your PowerBook

Built-in speaker

Power button

Security slot

AirPort antenna window

Built-in speaker/ microphone

Sleep indicator light

Function key

Trackpad button

Display release button

Trackpad Slot-loading DVD-ROM drive

Mute control

Keyboard release tab

Brightness controls

Keyboard lock

Num Lock key

Keyboard release tab

Volume controls

- Media Eject key

Programmable function keys

16 Chapter 2

LL2010.Book Page 17 Thursday, March 15, 2001 4:28 PM

Brightness controls

Increase or decrease the brightness of your PowerBook display using these keys on your PowerBook keyboard.

- Volume controls

Increase or decrease the volume of the sound coming from the built-in speakers and sound output port.

Mute control

Turn the sound from the PowerBook built-in speakers and sound output port off and on.

Keyboard lock

Protect the internal components of your PowerBook by preventing the keyboard from being easily opened.

Num Lock key

Activate the numeric keypad embedded in the PowerBook keyboard.

Media Eject key

Press this key to eject a CD or DVD disc.

Power button

Turn your PowerBook on and off or put it to sleep.

Slot-loading DVD-ROM drive

Use the DVD-ROM drive to install and run programs, play music CDs, play DVD-Video discs, or reinstall system software. To eject a disc, drag the discs icon to the Trash or use the Media Eject key on the keyboard.

Function (Fn) key

Press and hold this key to activate the function keys (F1F12).

Keyboard release tabs

When you need to access the internal memory slots, pull these tabs down to release the PowerBook keyboard.

Microphone

Record sounds directly on your PowerBook hard disk with this built-in microphone (located under the speaker cover). You can also connect an external microphone to one of the USB ports or use a professional microphone that connects to a PCMCIA Card.

Security slot

Protect your PowerBook by connecting a security cable.

Sleep indicator

A white light pulsates when the PowerBook is in sleep.

Trackpad

Move the pointer on the PowerBook display. With the Trackpad control panel, you can set the trackpad to double-click and select items directly instead of using the trackpad button.

Getting to Know Your Computer 17

LL2010.Book Page 18 Thursday, March 15, 2001 4:28 PM

Additional Features of Your PowerBook

G

W

PC Card slot

PC Card eject button

AirPort antenna window

W Internal modem port

Headphone port

Infrared window

USB ports (2)

Power adapter port

External monitor port

Ethernet port (10/100Base-T)

Reset buttonG

FireWire port

Sleep indicator light

TV out port

f

G W 1 2

18 Chapter 2

LL2010.Book Page 19 Thursday, March 15, 2001 4:28 PM

FireWire port

Connect high-speed external devices, such as digital video cameras, printers, and external storage devices.

G Ethernet port (10/100 Base-T)

Connect to a high-speed 10/100Base-T Ethernet network or connect to another computer and transfer les.

Two USB (Universal Serial Bus) ports

Connect additional equipment to your PowerBook, such as printers, external storage devices, modems, keyboards, and joysticks.

External monitor (VGA) port

Connect to an external monitor or projection device that uses a VGA-style connector.

TV out (S-video out) port

Connect your PowerBook to a television, VCR, or other video device. You can use TV out for presentations or to play a DVD-Video on your television.

PowerBook reset button

Reset the computer with this button when you cannot shut it down using the Power button.

W Internal modem port

Connect a standard phone line directly to the internal modem.

Infrared window

Use infrared (IR) communication to send les to another IR-equipped computer, print on an IR-equipped printer, or connect to an IR network that uses the IrDA standard. You can also use IR to synchronize with certain handheld personal assistants or use a cellular telephone (where applicable) to connect to your Internet service provider.

f Headphone port

Connect external speakers, headphones, or other sound output device.

PC Card slot

Expand the capabilities of your PowerBook using this Type II PC Card slot that supports both PCMCIA and CardBus formats.

Getting to Know Your Computer 19

LL2010.Book Page 20 Thursday, March 15, 2001 4:28 PM

Inside Your PowerBook

AirPort Card slot

Bottom case

Battery

Serial number Ethernet ID

Keyboard flipped over

PowerBook with the keyboard flipped over and internal RAM slot visible

PowerBook turned over with the bottom case removed

Upper memory slot

Lower memory

slot (filled)

AirPort antenna

20 Chapter 2

LL2010.Book Page 21 Thursday, March 15, 2001 4:28 PM

Memory slots

Your PowerBook comes with two memory slots, one above the other. The lower slot contains the memory module that came with your PowerBook. You can install an additional memory module in the upper slot. (If you ordered your PowerBook with additional memory, the upper slot may already be lled.) The maximum amount of RAM you can install in your PowerBook is 1 gigabyte (GB), using a 512 megabyte (MB) memory module in each slot. For instructions, see Installing Additional Memory on page 60.

Optional AirPort Card

Installing an AirPort Card in your computer allows access to a wireless network. For instructions, see Installing an AirPort Card on page 67.

AirPort antenna cable

The end of the built-in AirPort antenna attaches to the end of the optional AirPort Card.

Getting to Know Your Computer 21

LL2010.Book Page 22 Thursday, March 15, 2001 4:28 PM

Sherlock 2Your Internet Search Detective

Search buttonC

After you type what you are looking for, click this button to start the search.

Sherlock channelsC

Search the Internet for people, shopping, news,

Apple info, and more.

Search sitesC Search engines that Sherlock uses to search the Internet.

22 Chapter 2

LL2010.Book Page 23 Thursday, March 15, 2001 4:28 PM

What You Can Do

Sherlock 2 is your search detective and personal shopper on the Internet. It provides an easy way to nd people, news, and just about anything. Shop for books and music and search auction sites, nd the best priceseven check product availability.

To Get Started

1 Connect to the Internet.

2 Choose Search Internet from the File menu or double-click the Sherlock icon on the desktop.

3 Select a Sherlock channel.

4 Type what you are looking for and click the Search button.

Tips and Tricks

Create your own customized Sherlock search channel

1 Choose New Channel from the Channels menu.

2 Select a name, channel type, and icon.

3 Download Sherlock plug-ins and drag them into the search site list. Or hold down the Option key and drag plug-ins from the other search lists to the icon of your new channel.

To Learn More

To learn more about what you can do with Sherlock, open Mac Help and search for Sherlock. To download additional search plug-ins and nd out how you can create your own Sherlock plug-in, go to the Sherlock Web site at www.apple.com/sherlock

Getting to Know Your Computer 23

LL2010.Book Page 24 Thursday, March 15, 2001 4:28 PM

iToolsFree Internet Services for Mac Users

EmailC Get your own Mac.com email address. Its easy and free, and it works with your favorite email clients.

iDisk With your very own 20 megabyte storage space on Apples Internet server, iDisk is the easy way to share files over the Internet. Using iDisk, you can easily share photos and movies, as well as import them into your own Web site.

HomePageC

Build your own personal Web site in three easy steps. Create a birth announcement, rsum, or photo album, or set up your own iMovie theater. Apple will even host your Web site on its Internet server, so its always there for the world to see.

C

KidSafeC

KidSafe makes the Internet a safer place for your kids. KidSafe gives them access to more than 75,000 educator-approved Web sites and blocks all the rest.

24 Chapter 2

LL2010.Book Page 25 Thursday, March 15, 2001 4:28 PM

What You Can Do

iTools is a new class of Internet services from Apple created exclusively for Mac users. With iTools, you can get your own Mac.com email address, make the Internet safer for your children, and share photos and movies. You can even create your own Web site.

To Get Started

1 Connect to the Internet.

2 Go to www.apple.com

3 Click the iTools tab and then click the Free Sign Up button.

Tips and Tricks

Upload pictures to your iDisk to create custom iCards

You can send iCards with your own custom pictures. Save your images as GIF or JPEG les and then copy them to the Pictures folder on your iDisk. Your images will appear as picture choices when you create an iCard in the Create Your Own section.

Start with a HomePage template to create your own Web page in minutes

HomePage has Web page templates that you can modify with your own text and images. For example, teachers can use the HomePage education templates to post recent class news, homework assignments, and other information for parents. You can also use the HomePage photo album and iMovie templates to share your pictures and movies easily with your friends and family.

Create an alias of your iDisk for easy access

Instead of connecting to the Web manually to open your iDisk, you can select the icon of your iDisk and choose Make Alias from the File menu. Whenever you want to access your iDisk, double-click the alias and enter your password.

Use KidSafe in conjunction with the Multiple Users control panel

Use the Multiple Users control panel to set up your computer for your entire family to share. Then set up KidSafe for each of your childrens accounts.

Getting to Know Your Computer 25

LL2010.Book Page 26 Thursday, March 15, 2001 4:28 PM

Apple.comYour Starting Place on the World Wide Web

Macintosh Products Guide

www.apple.com/guideC

For great hardware and software products for your Mac, check

this Web site or look for the Mac symbol.

iCards www.apple.com/icardsC Use the Internet to send greeting cards to your friends and family.

Mac OS X www.apple.com/macosxC

Get the latest info on the worlds most advanced OSMac OS X.

C

26 Chapter 2

LL2010.Book Page 27 Thursday, March 15, 2001 4:28 PM

Apple Support www.apple.com/supportC Find the latest troubleshooting information, download software updates, find information on product protection plans, and more.

Apple Hot News www.apple.com/hotnewsC

Want the latest Apple news straight from the source? Check out Apple Hot News. You can find information on software updates for your Mac and third-party software, QuickTime hot picks, and information on the next big Apple event.

The Apple Store www.apple.com/storeC

Your one-stop shop for the latest Apple hardware and

software products, including select software and accessories

from third-party developers.

Getting to Know Your Computer 27

LL2010.Book Page 28 Thursday, March 15, 2001 4:28 PM

QuickTimeAudio and Video on the Internet

Volume control

Play button Favorites drawerC

Quick access to all of your QuickTime TV channels. Pull the tab at the bottom to open and close the Favorites drawer.

28 Chapter 2

LL2010.Book Page 29 Thursday, March 15, 2001 4:28 PM

What You Can Do

In addition to playing video and music les on your Mac, with QuickTime you can watch live and recorded Internet broadcasts.

To Get Started

1 Connect to the Internet.

2 Double-click the QuickTime Player icon on the desktop.

3 Open the Favorites drawer.

4 Select a channel.

Tips and Tricks

Add additional QuickTime TV channels

Go to www.apple.com/quicktime and click the QuickTime TV link. There you will nd all of the available QuickTime channels. You can watch a QuickTime TV channel and with one click add it to the Favorites drawer in QuickTime Player.

Upgrade to QuickTime Pro to do the following:

m Play back full-screen video and resize movies.

m Create streaming movies.

m Work with more than 30 audio, video, and image formats, including Flash.

m Create, open, edit, and save movies and audio, as easily as copying and pasting.

To Learn More

Internet video is just one of the things you can do with QuickTime. To learn more, start with QuickTime Help. To download additional channels, watch the latest movie trailers, and nd information on setting up your own Internet streaming server, go to the QuickTime Web site at www.apple.com/quicktime

Getting to Know Your Computer 29

LL2010.Book Page 30 Thursday, March 15, 2001 4:28 PM

iMovie 2Create and Edit Your Own Digital Movies

iMovie monitorC

Preview your movie or view

video directly from a connected DV

camcorder.

Playback controlsC

Use these to play the movie in the iMovie monitor.

Mode switchC

Use this to switch between importing from

a camcorder and editing.

Timeline viewerC

The clip viewer and the timeline

viewer are visual aids for

assembling and editing your

movie.

Editing buttonsC Click these to open panels for adjusting and selecting sounds, video effects, titles (text), and transitions. Click the Clips button to see the shelf.

Scrubber barC

Use this to select sections of video.

Audio tracksC

Lets you work with recordings, music, and sound effects.

PlayheadC

Represents the location of the frame showing in the iMovie monitor. Move the playhead to see where things appear in a movie.

Video trackC

Lets you work with audio

contained in video clips.

Clip viewerC

ShelfC

To make clips part of your movie after you import them, drag them from the shelf to the clip viewer.

30 Chapter 2

LL2010.Book Page 31 Thursday, March 15, 2001 4:28 PM

What You Can Do

iMovie is an easy-to-use digital video editing software application. With iMovie and a digital video camcorder, you can create and edit your own movies. Import video from the camera, edit clips, add transitions, titles, sound effects, and music. Then copy the movie to a camcorder tape or create a QuickTime movie.

To Get Started

1 Shoot your video, connect the camera to your computers FireWire port, and then open iMovie.

2 Click the Import button to import movie clips to the shelf, then add them to your movie by dragging them to the clip viewer.

3 Assemble and edit your movie in the clip viewer and timeline viewer.

4 Add transitions, titles, sound, and music.

5 When you are nished, choose Export from the File menu.

Tips and Tricks

Share your desktop iMovie with your friends and family

Export your movie as a QuickTime Web movie and copy the movie to your iDisk. Then use HomePage to create your own iMovie theater so that others can view your movie on the Internet.

To Learn More

For more information on using iMovie, see the iMovie Tutorial or iMovie Help. For the latest on iMovie, including iMovie updates, additional plug-ins, and a list of compatible DV camcorders, go to the iMovie Web site at www.apple.com/imovie

Getting to Know Your Computer 31

LL2010.Book Page 32 Thursday, March 15, 2001 4:28 PM

iTunesDigital Music For Your Mac

Eject CD button

Radio TunerC

Listen to hundreds of Internet radio

stationsjazz, rock, talk, and more.

Audio CDsC

Play an audio CD on your computer.

Import songs to your library.

Portable musicC

Transfer songs to an MP3 player by

dragging songs from your library.

New Playlist buttonC

Create a personalized playlist using songs from your library.

SearchC

Type in some text and iTunes lists song titles that match.

Visuals buttonC

Have iTunes display a stunning light show that

changes, throbs, and pulses to the beat of your music. Enjoy different colors and

patterns every time you listen to a song.

32 Chapter 2

LL2010.Book Page 33 Thursday, March 15, 2001 4:28 PM

What You Can Do

iTunes lets you import songs from music CDs as MP3 les, create playlists, move music to your portable MP3 player, listen to hundreds of radio stations on the Internet, and more.

To Get Started

1 Open iTunes (located inside the Applications folder on your hard disk).

2 Insert a music CD into your DVD drive.

3 Click the checkbox next to the songs you want to import.

4 Click the Import button. Your songs are converted into MP3 les and stored in your iTunes library.

Tips and Tricks

Create playlists for your favorite sets of songs

iTunes lets you create playlists from songs in your library. A playlist is a list of songs in a specic order. Use your playlists to program your music for specic moods, artists, or themes. Click the New Playlist button and drag songs from your library to the playlist.

Resize the iTunes window or access iTunes from the Control Strip

You can collapse the iTunes window to show just the playback controls and status. Click the zoom box in the upper-right corner of the iTunes window. You can also access iTunes controls from the iTunes Control Strip module.

Look up CD information from CDDB

iTunes connects to the CDDB database on the Internet automatically to look up the name of the CD, song titles, and other information about your music CD. If you are not connected to the Internet, you can look up information on songs you imported the next time you connect. Select the song and choose Get CD Track Names from the Advanced menu.

Connect your PowerBook to your stereo system

You can easily connect your PowerBook to your stereo system. Use a miniplug-to-RCA cable (not included) to connect the headphone port (f) on your PowerBook to the audio input ports on your stereo.

To Learn More

For more information on using iTunes, see iTunes Help or go to the iTunes Web site at www.apple.com/itunes

Getting to Know Your Computer 33

LL2010.Book Page 34 Thursday, March 15, 2001 4:28 PM

Auto UpdatingAutomatically Keep Your Mac on the Cutting Edge

Update NowC

Instantly check Apples Internet servers to see if any updates

are available for your software. The Software Update control

panel displays all of the updates useful for keeping your

computer running smoothly.

Set ScheduleC

Set the day of the week and time of day to check automatically for software updates.

34 Chapter 2

LL2010.Book Page 35 Thursday, March 15, 2001 4:28 PM

What You Can Do

Auto updating uses the Internet to download (and even install) the latest updates, drivers, and other enhancements from Appleautomatically. You can even set your Mac to check Apples server periodically and download and install updated software for you.

To Get Started

1 Connect to the Internet.

2 Choose Control Panels from the Apple menu and then choose Software Update from the submenu.

3 Click the Update Now button.

4 Select the software you want to update and then click Install.

Tips and Tricks

Adjust your Software Update schedule

If you have an Internet connection that is always on, you can set a schedule for your computer so that it checks for software updates at a certain time on specic days of the week. If you have a dialup connection and you are not connected, Software Update will check the next time you connect.

Install new software automatically

You can set up your Mac so that every week it checks for and installs the latest software. Set a schedule for your computer to check for software updates and deselect the Ask me before installing new software checkbox.

To Learn More

For more information on using Software Update, search for Software Update in Mac Help. For the latest information on the Mac OS, go to the Mac OS Web site at www.apple.com/macos

Getting to Know Your Computer 35

LL2010.Book Page 36 Thursday, March 15, 2001 4:28 PM

Multiple UsersTurn One Mac Into Many

AccountsC Set the appearance of the users environment. If you want to control the users access to certain applications, choose Limited or Panels.

36 Chapter 2

LL2010.Book Page 37 Thursday, March 15, 2001 4:28 PM

What You Can Do

With Multiple Users, you can allow up to 40 users to share a single Mac with their own customized settings and private storage space. For example, users can set their own desktop picture, sort their views the way they like, bookmark favorite Web sites, and do many other things that create, in effect, a personalized Mac for each individual user. You can also specify how much accessand liberty to change thingseach individual user can have.

To Get Started

1 Choose Control Panels from the Apple menu and then choose Multiple Users from the submenu.

2 Turn Multiple User Accounts on.

3 Click the Options button to congure overall multiple user settings such as the Welcome message and other options.

4 Click the New User button.

5 Edit the users information, access privileges, and applications.

6 Close the Multiple Users control panel.

Each time the computer starts up, the login window appears. To go back to the login window after another user has already logged in, choose Log Out from the Special menu.

Tips and Tricks

Create a voice print passphrase

Record yourself speaking a phrase, such as My voice is my password. Your Mac stores your voice print for comparison. Later, when you log in by speaking your passphrase, your Mac analyzes the biometrics of your voice to make sure you are who you say you are.

To Learn More

For more information on setting up Multiple Users, including creating a voice print passphrase, search for Multiple Users in Mac Help. For the latest information on the Mac OS, go to the Mac OS Web site at www.apple.com/macos

Getting to Know Your Computer 37

LL2010.Book Page 38 Thursday, March 15, 2001 4:28 PM

Mac HelpAnswers to All Your Macintosh Questions

SearchC

Got a question? Type it here and click Search.

38 Chapter 2

C H A P T E R

3

LL2010.Book Page 39 Thursday, March 15, 2001 4:28 PM

3 Using Your Computer Your PowerBook has many built-in features and expansion capabilities you can use to customize and expand your computer to t your needs. These include the following:

m Universal Serial Bus (USB) for connecting additional equipment to your PowerBook, such as printers, scanners, joysticks, keyboards, digital cameras, and oppy disk drives.

m FireWire for connecting high-speed equipment, such as digital video cameras and external hard disks.

m The latest in communications technologies, such as a 56K modem, infrared, 10/100Base-T Ethernet, and optional AirPort wireless Internet and networking.

m The ability to use your PowerBook with an external monitor, video projector, or television, including support for video mirroring and creating an extended desktop. Use your PowerBooks built-in video support to do presentations, work with an external monitor, or play DVD-Video discs on your television.

m Long-lasting battery, one Type II PC Card/CardBus slot, and more.

To learn about what you can do with your PowerBook, start with the information in this chapter. Additional information can be found in Mac Help (see page 38) and on Apples many Internet Web sites.

39

LL2010.Book Page 40 Thursday, March 15, 2001 4:28 PM

Universal Serial Bus (USB)

Your PowerBook comes with two USB ports, which you can use to connect many types of external devices, including printers, scanners, digital cameras, game pads, joysticks, keyboards, and hard disk drives. USB makes it easy to connect external equipment. In most cases you can connect and disconnect a USB device while the computer is running. Once you connect the device, it is ready to use. You dont need to restart or recongure your computer.

Using USB Devices

To use a USB device with your computer, simply connect the device to the computer. Your computer automatically loads the correct software whenever you attach a new device.

Note: Apple has already included software to work with many USB devices. When you connect a USB device, if your PowerBook cannot nd the correct software, you can either install the software that came with the device or follow the onscreen prompts to use the Internet to locate, download, and install the correct software.

USB Devices and Battery Power

USB devices, such as joysticks and keyboards, that get power from the USB connection instead of a separate power adapter can be used with your PowerBook. However, these types of USB devices can cause your PowerBook battery to become depleted faster. If you are going to have a device connected for an extended period, it is a good idea to plug in the power adapter.

1 2

G

W

40 Chapter 3

LL2010.Book Page 41 Thursday, March 15, 2001 4:28 PM

Using Multiple USB Devices at the Same Time

Your PowerBook has two USB ports. If you want to use more than one device on the same USB port, purchase a USB hub. The USB hub connects to an open port on your computer and provides additional USB ports (usually four or seven).

For More Information on USB

Additional information on USB is available in Mac Help (see page 38). Choose Mac Help from the Help menu and search for USB. You can also nd information on Apples USB Web site at www.apple.com/usb

For information on USB devices available for your computer, check the Macintosh Products Guide at www.apple.com/guide

G

W

USB hub

Using Your Computer 41

LL2010.Book Page 42 Thursday, March 15, 2001 4:28 PM

FireWire

Your computer has one FireWire port. FireWire lets you easily connect and disconnect external high-speed devicessuch as digital video (DV ) cameras, printers, scanners, and hard disks. You can connect and disconnect FireWire devices without restarting your computer.

These are some of the things you can do with FireWire:

m Connect a digital video camera and capture, transfer, and edit high-quality video directly on your computer using video editing software such as iMovie.

m Connect an external FireWire hard disk drive and use it to back up data or transfer les. A FireWire hard disk icon appears on your desktop immediately after you connect the drive to your PowerBook.

m Start up from an external FireWire hard disk. Connect an external FireWire disk (with a valid System Folder installed on it) and then select the disk in the Startup Disk control panel. (To access the control panel, choose Control Panels from the Apple [K] menu and then choose Startup Disk from the submenu.)

m If you want to transfer les between computers or have a problem that prevents your computer from starting up, you can use FireWire to connect your PowerBook to another FireWire-equipped computer so that your PowerBook will appear as an external hard disk on the other computer (a feature known as FireWire target disk mode).

Using FireWire Devices

To use a FireWire device with your computer, connect the device to the computer and install any software that came with the device. Your computer automatically senses when you attach a new device.

G

W

42 Chapter 3

LL2010.Book Page 43 Thursday, March 15, 2001 4:28 PM

FireWire Devices and Battery Power

FireWire devices, such as certain external hard disks, that get power from the FireWire connection instead of a separate power adapter can be used with your PowerBook. However, these types of FireWire devices can cause your PowerBook battery to become depleted faster. If a device will be connected for an extended period, it is a good idea to plug in the power adapter.

FireWire Target Disk Mode

If you want to transfer les or have a problem that prevents your computer from starting up, you can use FireWire to connect your PowerBook to another computer so that your PowerBook will appear as an external hard disk on the other computer.

To connect your PowerBook in FireWire target disk mode, follow these steps:

1 Make sure that your PowerBook is shut down.

2 Use a FireWire cable with a standard 6-pin connector on each end to connect your PowerBook to another FireWire-equipped computer.

3 Start up your PowerBook and immediately hold down the T key.

Your PowerBook display shows the FireWire logo, and the PowerBook internal hard disk icon appears on the desktop of the other computer.

4 When you are nished transferring les, drag the PowerBook hard disk icon to the Trash.

5 Press the Power button on the PowerBook to shut it down and then disconnect the FireWire cable.

For More Information on FireWire

Additional information on FireWire, including setting up a network of FireWire devices, is available in Mac Help (see page 38). Choose Mac Help from the Help menu and search for FireWire. You can also nd information on Apples FireWire Web site at www.apple.com/rewire. For information on the FireWire devices available for your computer, check out the Macintosh Products Guide at www.apple.com/guide

Important The computer you connect your PowerBook to must have FireWire version 2.3.3 or later installed. Use Apple System Proler, available in the Apple menu, to check the version of FireWire installed. If you have an older version, check the Apple FireWire Web site at www.apple.com/rewire

Using Your Computer 43

LL2010.Book Page 44 Thursday, March 15, 2001 4:28 PM

PC Cards

You can expand your computers capabilities using the PC Card slot. Your PowerBook has one PC Card slot that accepts Type I and Type II PCMCIA cards, including CardBus-format cards. You can insert a PC Card when your computer is on, off, or in sleep.

Inserting and Ejecting a PC Card

When inserting a PC Card, make sure the label is facing up and the card is level. Youll feel some resistance as you slide the card in. When the card is rmly seated in the slot, it clicks into place and an icon appears on the desktop. You can eject a PC Card when your computer is on or off, but not when it is in sleep.

To eject a PC Card:

1 If the computer is turned on, drag the cards icon to the Trash.

2 Push the PC Card eject button once to release the button.

3 Push the button again to eject the card.

4 Pull the card out of the slot and then push the eject button again to set it ush against the computer.

For More Information on PC Cards

For information on the PC Cards available for your PowerBook, check out the Macintosh Products Guide at www.apple.com/guide

G

W

PC Card slot

Eject button

Important The Apple AirPort Card is installed in a slot inside your computer. It does not go in the PC Card slot the way many third-party wireless cards do. The AirPort Card will not work if it is installed in the PC Card slot and will cause your computer to function improperly.

44 Chapter 3

LL2010.Book Page 45 Thursday, March 15, 2001 4:28 PM

AirPort Wireless Internet and Networking

Your PowerBook is AirPort-ready. AirPort offers an easy and affordable way to provide wireless Internet access anywhere in the home, at work, or in the classroom. Instead of using traditional cables, AirPort uses wireless local area network (LAN) technology to provide wireless communication between multiple computers. Through a wireless network you can set up access to the Internet, transfer les, play multiplayer games, and more.

Note: Wireless Internet access requires an AirPort Card, AirPort Base Station, and Internet access (fees may apply). Some Internet service providers are not currently compatible with AirPort, including America Online. Range may vary with site conditions.

How AirPort Provides Wireless Internet Access

With AirPort, you set up a wireless connection to a device known as a base station, which has a physical connection to the Internet. The base station can be an external device or another computer with an AirPort Card installed (known as an AirPort software base station). AirPort technology works like a cordless telephone. The AirPort Card in the computer makes a wireless connection to the base, which is connected to the telephone line.

For More Information on AirPort

To purchase an AirPort Card or AirPort Base Station, contact your Apple-authorized dealer or go to the Apple Store at www.apple.com/store. For instructions on installing an AirPort Card, see page 67.

Additional information on AirPort is available in AirPort Help. Choose Help Center from the Help menu and click the AirPort Help link. You can also nd information on Apples AirPort Web site at www.apple.com/airport

AirPort Base Station

Connection to the Internet

Using Your Computer 45

LL2010.Book Page 46 Thursday, March 15, 2001 4:28 PM

Ethernet (10/100Base-T)

Your computer comes with built-in 10/100 megabit per second (Mbps) twisted-pair Ethernet networking capability, which you can use to connect to a network or to a cable or DSL modem.

Connecting to a network gives you access to other computers. You may be able to store and retrieve information, use network printers, modems, and electronic mail, or connect to the Internet. You can also use Ethernet to share les between two computers or set up a small network.

Note: Use category 5 Ethernet cables to connect to a 100Base-T Ethernet network.

For More Information on Using Ethernet

Additional information, including setting up an Ethernet network and transferring les using Ethernet, is available in Mac Help (see page 38). Choose Mac Help from the Help menu and search for Ethernet or network.

For information on networking products you can use with your PowerBook, check the Macintosh Products Guide at www.apple.com/guide

G

W

G

46 Chapter 3

LL2010.Book Page 47 Thursday, March 15, 2001 4:28 PM

Infrared (IrDA)

Because your PowerBook is equipped with infrared (IR), you can exchange les and data without using wires. The type of IR used is the industry-standard IR communication method known as IrDA.

You can use infrared to share les with another IrDA-equipped computer, communicate with other infrared devices such as handheld organizers, connect to an infrared network, and even print on an infrared printer. Sharing les using infrared is the same as sharing les using Ethernet, except that AppleTalk and TCP/IP are set to Infrared instead of Ethernet.

Note: You cannot share les with a computer that only supports IRTalk (a non-standard IR communication method used by some older computers).

Making an Infrared Connection

To connect to another computer using infrared:

1 Position the IR windows of the two computers so that they are directly facing and within 3 feet of each other.

2 Congure AppleTalk and TCP/IP to communicate using infrared.

3 Make sure that le sharing is turned on in the File Sharing control panel.

For More Information on Infrared

Information on conguring the Mac OS to communicate using infrared and setting up le sharing is available in Mac Help (see page 38). Choose Mac Help from the Help menu and search for infrared or le sharing.

G

W

Using Your Computer 47

LL2010.Book Page 48 Thursday, March 15, 2001 4:28 PM

External Video Support (VGA and S-Video)

Your computer has a monitor port that allows you to directly connect a monitor with a VGA- style adapter or other external video device such as a video projector.

The TV out port (also known as an S-video out port) on your computer lets you connect to a television, videocassette recorder ( VCR), or video projection system using either an S-video or composite video cable (available at your local electronics store). You can use TV out to display images on a television, record computer images on a VCR, or play DVD-Video discs on your television (see page 54).

Note: If the device you want to connect does not have S-Video, you can use the Composite- to-S-video adapter that came with your PowerBook.

When an external monitor or television is connected, you can either have the same image appear on both the internal display and the external monitor (known as video mirroring) or use the external monitor to extend the size of the Mac OS desktop (known as extended desktop mode).

Note: Because of the display limitations of most televisions, images displayed on the television screen will be of lower quality than those on the built-in display or an external monitor.

G

W

External monitor port

TV out portVGA monitor cable

Composite-to-S-video cable

48 Chapter 3

LL2010.Book Page 49 Thursday, March 15, 2001 4:28 PM

Connecting an External Monitor

To connect an external monitor to your computer:

1 Shut down your computer or put it to sleep and turn off the external monitor.

2 Connect the monitor cable to your PowerBook.

3 Turn on the external monitor.

4 Start up or wake your computer.

5 Use the Resolution portion of the Control Strip to change resolutions on the external monitor. For information on the supported external monitor resolutions, see page 81.

By default, your PowerBook starts up in extended desktop mode. You can use the Video Mirroring portion of the Control Strip to make the images on the PowerBook display and the external monitor the same.

Note: In addition to the Video Mirroring control module you can install the Video Mirroring App (located in the CD Extras folder on your system software CD) and assign it to a function key (see page 56). When assigned, you can quickly switch between extended desktop mode and video mirroring by pressing a single key.

Using Your PowerBook With the Display Closed

You can use your PowerBook with the display closed if the computer is connected to an external monitor, keyboard, and mouse.

To operate your computer with an external monitor attached and the display closed, do the following:

1 Connect a USB keyboard and mouse to your PowerBook.

2 Close the PowerBook display to put the computer to sleep.

3 Follow the steps in the previous section to connect your PowerBook to an external monitor.

4 Wait a few seconds and then press any key on the external keyboard to wake the PowerBook.

Note: If your external USB keyboard has a Power button, you can shut down your PowerBook and start it with the display closed by pressing the Power button (instead of having it wake from sleep as described in the steps above).

Video MirroringResolution

Using Your Computer 49

LL2010.Book Page 50 Thursday, March 15, 2001 4:28 PM

Connecting a Television, VCR, or Other Video Device

To connect a device to the TV out port:

1 Shut down your computer or put it to sleep and turn off the external device.

2 Connect an S-video cable to the TV out port () on your PowerBook (or use the adapter to connect a composite video cable) and connect the other end to your device.

3 If you want to send the sound from your PowerBook to the device, connect a miniplug-to- RCA cable (not included) from the headphone port (f) on your PowerBook to the audio input ports on your device.

4 Turn on the external device.

5 Start up or wake your computer.

6 Use the TV Mirroring portion of the Control Strip to adjust how the images are displayed on the device.

For More Information on Using an External Monitor or TV

Additional information on using and conguring an external monitor is available in Mac Help (see page 38). Choose Mac Help from the Help menu and search for monitor.

TV Mirroring

50 Chapter 3

LL2010.Book Page 51 Thursday, March 15, 2001 4:28 PM

Battery

When the external power adapter is not connected, your computer draws power from its battery. You can determine the charge left in your battery by looking at the battery level indicator lights on the battery itself. The lights glow to show how much charge is left in the battery. The indicator lights remain lit for a few seconds after you press the button.

Removing and Replacing the Battery

To remove the battery:

1 Shut down your PowerBook, turn it over, and locate the battery release latch.

2 Slide the latch down and gently remove the battery.

Important If only one ashing light is on, very little charge is left. If no lights are visible, the battery is completely drained and the computer will not start up unless the power adapter is connected. Plug in the power adapter for several hours to let the battery recharge.

Battery

Battery LEDs

Battery

Latch

Using Your Computer 51

LL2010.Book Page 52 Thursday, March 15, 2001 4:28 PM

Swapping Batteries While the Computer Is in Sleep

If your battery runs low while you are working, you can put your PowerBook to sleep and replace the battery with a charged one. The internal backup battery provides enough power to maintain the contents of RAM for about one minute.

Charging a Battery

When the power adapter is connected, the battery is recharged whether the computer is off, on, or in sleep. However, the battery will recharge more quickly if the computer is off or in sleep. You can monitor the battery charge level using the Control Strip.

To maximize the life of your PowerBook battery, use the power adapter whenever possible.

Calibrating a New Battery for Best Performance

To get the longest running time from a new PowerBook battery, let the battery run down and then fully charge it one time. Follow these steps:

1 Plug in the power adapter and fully charge your PowerBook battery until the battery indicator lights and the onscreen meter indicate that the battery is fully charged.

2 Disconnect the power adapter and use your PowerBook until you see the rst low battery warning.

3 Connect the power adapter and leave it connected until the battery is fully charged again.

Important If your computer has 512 megabytes (MB) or more of memory installed, the backup battery maintains the contents of RAM for less than a minute. If you have more than 512 MB of memory installed, save your work and shut down your computer before you swap batteries.

Battery charge level indicator

Important You only have to fully discharge and then charge your battery once to calibrate it. After that, you can connect and disconnect the power adapter when the battery is at any charge level.

52 Chapter 3

LL2010.Book Page 53 Thursday, March 15, 2001 4:28 PM

Battery-Saving Tips

The amount of work time your PowerBook battery can provide before you need to recharge it depends on the equipment youre using with your computer and the steps you take to conserve power while you work.

To save battery power, do one or more of the following:

m Disconnect bus-powered USB or FireWire devices when they are not in use.

m Quit open applications that you are not using.

m Remove CD-ROM and DVD-ROM discs when they are not in use.

m Reduce screen brightness using the brightness control on the PowerBook keyboard.

m Use a lighter desktop pattern.

m Close the display to put the computer in sleep whenever your work is interrupted.

Additional options are available in the Energy Saver control panel and Control Strip module:

m Set the hard disk to spin down after a short time.

m Set your PowerBook to sleep after inactivity of ve minutes or less.

m Make sure that processor cycling is turned on.

m Set your processor to operate at a slower speed when using non-processor-intensive applications such as a word processor. (Operating at a slower speed conserves battery power. However, it may affect performance of processor-intensive applications, such as DVD playback.)

Use the Energy Saver Control Strip module to easily access your computers energy settings.

For More Information on Your PowerBook Battery

Additional information is available in Mac Help (see page 38). Choose Mac Help from the Help menu and search for battery.

Energy Settings

Using Your Computer 53

LL2010.Book Page 54 Thursday, March 15, 2001 4:28 PM

DVD Drive

All the software necessary to use your computer and connect to the Internet is already installed on your PowerBook. ( You need to use the PowerBook CDs that came with your computer only if you are having problems and need to reinstall system software.) However, if you purchased additional software with your PowerBook, you can install or run programs from CD and DVD discs using the DVD drive.

Note: If you have older software that comes on oppy disks, contact the software manufacturer to see if the software is available on a CD-ROM disc or purchase a third-party external oppy disk drive (such as an LS120/SuperDisk) from your Apple dealer or the Apple Store (www.apple.com/store).

Inserting Discs

To install or use programs from a CD or DVD disc, follow these steps:

1 With the computer turned on, insert the disc (with the label facing up) into the drive slot until you feel the drive catch the disc and take it the rest of the way in.

2 When the icon for the disc appears on the desktop, the disc is ready to use.

Emergency eject hole

Paper clip

Important Your PowerBook DVD drive is designed to work with standard size CD and DVD discs. Irregularly shaped discs will not work and may damage your computer.

54 Chapter 3

LL2010.Book Page 55 Thursday, March 15, 2001 4:28 PM

Ejecting a Disc From the DVD Drive

You eject a disc by dragging the disc icon to the Trash or pressing the Media Eject ( ) key on the keyboard.

If you cant eject the disc, try the following:

m Quit any applications that may be using the disc and try again.

m Restart your computer and hold down the trackpad button during startup until the disc ejects.

m If that does not work, insert the end of a paper clip into the manual eject hole (located on the far right side of the drive slot) to press the internal eject button. To use the manual eject button, your PowerBook must be turned on.

Playing DVD Discs

You can also use the DVD drive to play DVD-Video discs on your PowerBook. Insert the DVD disc and then choose Apple DVD Player from the Apple (K) menu.

If you want to use S-video to connect your PowerBook to a TV (see page 48) so that you can watch a DVD-Video on the TV screen, select 720 x 480 NTSC (in the United States) or 720 x 576 PAL (in Europe and other regions) in the Resolution portion of the Control Strip. Then select Best for Video from the TV Mirroring portion of the Control Strip.

Note: When your PowerBook is connected to an external monitor, DVD playback is only available in extended desktop mode. You can drag the DVD window between the external monitor and the built-in display.

You can easily connect your PowerBook to your stereo system. Use a miniplug-to-RCA cable (not included) to connect the headphone port (f) on your PowerBook to the audio input ports on your stereo.

For More Information on Your DVD Drive

For instructions on using Apple DVD Player, open the player and then choose Apple DVD Player Help from the Help menu.

Additional information on using CD or DVD discs is available in Mac Help (see page 38). Choose Mac Help from the Help menu and search for discs.

Resolution TV Mirroring

Using Your Computer 55

LL2010.Book Page 56 Thursday, March 15, 2001 4:28 PM

Keyboard Controls and Programmable Function Keys

You can quickly adjust settings such as volume and screen brightness and eject a CD or DVD disc using the keyboard controls.

Your PowerBook also has ve additional keys that you can set up to open your frequently used applications or documents. These keys are known as programmable (or hot) function keys. For example, you can use these keys to open your Web browser, word processor, or favorite game. Once applications are open, you can use the keys to switch quickly between them.

Assigning Programmable Function Keys

The rst time you press one of the function keys, a dialog box appears that lets you assign any of the function keys to an application. After that, you can change function key assignments using the Keyboard control panel.

Using the Standard Function Keys

You can quickly change a key from a control or programmable function key to a standard function key by pressing the Fn key while you press the other key. You can also use the Keyboard control panel to reverse the keys so that the standard function keys are primary and the screen controls and programmable function keys are secondary. ( You would hold down the Fn key to change the screen brightness, for example.)

Brightness controls

Function (Fn) key

- Volume controls Hot function keys

Media Eject key

56 Chapter 3

LL2010.Book Page 57 Thursday, March 15, 2001 4:28 PM

Using the Embedded Numeric Keypad

Most desktop computer keyboards have a numeric keypad in addition to the regular keyboard keys. Your PowerBook keyboard has a numeric keypad incorporated in the standard keyboard keys. Keys used for the numeric keypad have a smaller secondary label.

To use the numeric keypad, press the Num Lock key on the keyboard. The light next to the Num Lock key turns on, indicating that the keypad is active. When youre nished, press the Num Lock key again to turn it off.

Note: When the numeric keypad is active, other keys and keyboard equivalents for menu commands (such as x-Q to quit) are deactivated.

For More Information on Keyboard Controls

Additional information on conguring the keyboard controls and programmable function keys is available in Mac Help (see page 38). Choose Mac Help from the Help menu and search for keyboard.

Numeric keypad

Num Lock key

Using Your Computer 57

LL2010.Book Page 58 Thursday, March 15, 2001 4:28 PM

Security Slot and Keyboard Lock

You can purchase a security cable and lock to protect your PowerBook. With a lock, you can secure your computer to a desk or table.

Your PowerBook also comes with a keyboard locking mechanism. When the keyboard is locked, users cant easily access the internal components of the computer, including the memory.

The keyboard locking mechanism is in the small plastic tab to the left of the Num Lock key, which also contains the Num Lock indicator light. Your PowerBook comes with the keyboard unlocked.

To lock the keyboard, use a small athead screwdriver to the turn the screw clockwise 1/2 turn. A small tab prevents the keyboard from being removed.

Note: The screw that turns the plastic tab has a small notch on one side that you can use to determine if the keyboard is locked. If the notch in the screw is on the top, the keyboard is unlocked. If the notch in the screw is on the bottom, the keyboard is locked.

For More Information on Security Options

Additional information on the software security features of your PowerBook, including multiple user passwords and le encryption, is available in Mac Help (see page 38). Choose Mac Help from the Help menu and search for security or multiple users.

Note: The Password Security control panel used on older computers is not compatible with your PowerBook and is not installed on your computer.

Sample locking device with security cable

Security slot

58 Chapter 3

C H A P T E R

4

LL2010.Book Page 59 Thursday, March 15, 2001 4:28 PM

4 Working Inside Your Computer This chapter provides information and instructions for working inside your computer.

Instructions are provided for the following procedures:

m Installing Additional Memory on page 60

m Installing an AirPort Card on page 67

Warning Apple recommends that you have an Apple-certied technician install memory or an AirPort Card. Consult the service and support information that came with your computer for instructions on how to contact Apple for service. If you attempt any of these procedures yourself, you risk damaging your equipment, and such damage is not covered by the limited warranty on your computer.

59

LL2010.Book Page 60 Thursday, March 15, 2001 4:28 PM

Installing Additional Memory

Your computer comes with two memory slots, one above the other, that you access by removing your PowerBook keyboard. Your computer comes with a 64 or 128 megabyte (MB) Synchronous Dynamic Random-Access Memory (SDRAM) module installed in the lower slot. The upper memory slot can accept a SDRAM module that meets the following specications:

m Small Outline-Dual Inline Memory Module (SO-DIMM) format

m 1.5 inch or smaller

m 64, 128, 256, or 512 MB

m 144-pin

m PC-100 Type RAM

Note: SDRAM from an earlier PowerBook that meets these specications can be used with your PowerBook.

The maximum amount of RAM you can install in your PowerBook is 1 GB, using 512 MB DIMMs in both the upper and lower RAM slots.

Installing Additional RAM

1 Shut down your computer. Disconnect the power adapter, phone cord, and any other cables connected to the computer.

2 Flip the computer over and remove the battery.

This prevents you from accidentally turning on the computer while installing memory.

Battery

Latch

Warning The internal components of your PowerBook may be hot. If you have been using your PowerBook, wait 30 minutes after shutting down your computer to let the internal components cool down before continuing.

60 Chapter 4

LL2010.Book Page 61 Thursday, March 15, 2001 4:28 PM

3 Make sure that the keyboard locking screw is not in the locked position. Your new PowerBook comes with the keyboard unlocked, so unless you or someone else locked the keyboard, you can skip this step.

4 Release the keyboard by pulling down on the keyboard release tabs (located to the left of the F1 and F9 keys) and then lift up on the top portion of the keyboard.

Working Inside Your Computer 61

LL2010.Book Page 62 Thursday, March 15, 2001 4:28 PM

5 Lift the top portion of the PowerBook keyboard up slightly near the top row of keys and pull it back far enough to displace the small tabs that hold the bottom of the keyboard in place.

6 Flip the keyboard over and lay it on the palm rests and trackpad.

7 Touch a metal surface inside the computer to discharge any static electricity.

62 Chapter 4

LL2010.Book Page 63 Thursday, March 15, 2001 4:28 PM

8 Locate the upper RAM expansion slot.

9 Hold the RAM expansion card at a 30-degree angle. Line up the notch in the card with the small tab in the RAM expansion slot. Then push the RAM expansion card into the expansion slot.

Note: You may feel some resistance. If you have trouble inserting the card, try pushing one side at a time.

Upper RAM slot

Lower RAM slot (filled)

Insert RAM expansion card at a 30o angle

30O

Working Inside Your Computer 63

LL2010.Book Page 64 Thursday, March 15, 2001 4:28 PM

10 Gently push the RAM expansion card down until the two snaps on either side of the card lock into place.

11 Flip the keyboard back on top of the opening in your PowerBook and insert the small tabs at the bottom of the keyboard into the openings in the PowerBook case.

64 Chapter 4

LL2010.Book Page 65 Thursday, March 15, 2001 4:28 PM

12 Pull down on the keyboard release tabs (located to the left of the F1 and F9 keys) and then press down on the top portion of the keyboard.

13 Let go of the keyboard release tabs to secure the keyboard in place.

14 Turn the PowerBook over and replace the battery.

15 Reconnect the power adapter and any other cables that were attached.

Working Inside Your Computer 65

LL2010.Book Page 66 Thursday, March 15, 2001 4:28 PM

Making Sure Your Computer Recognizes the New Memory

After installing additional memory in your PowerBook, check whether the computer recognizes the new memory. Do the following:

1 Start up your computer.

2 When you see the Mac OS desktop, choose About This Computer from the Apple (K) menu.

A window shows the total amount of memory in the computer.

The total includes the amount of memory that originally came with the computer plus the new memory you added. For a more detailed breakdown of the amount of memory installed in your computer, choose Apple System Proler from the Apple (K) menu.

If the memory is not recognized or your computer does not start up correctly, shut down your PowerBook and check the instructions again to make sure that the memory you installed is compatible with this PowerBook and that it is installed correctly. If you still have problems, remove the memory and consult the service and support information that came with your computer for instructions on how to contact Apple for service.

Total memory installed in your PowerBook

66 Chapter 4

LL2010.Book Page 67 Thursday, March 15, 2001 4:28 PM

Installing an AirPort Card

You can purchase an AirPort Card from your Apple-authorized dealer or from the Apple Store at www.apple.com/store and install it yourself or have it installed by an Apple-authorized service provider.

To install an AirPort Card in your PowerBook, follow these steps:

1 Shut down your computer. Disconnect the power adapter, phone cord, and any other cables connected to the computer.

2 Place a towel or soft cloth on a table in front of you. The towel or cloth will protect the keyboard and display of the PowerBook when you ip it over. Make sure that it covers an area large enough for your PowerBook and that it also hangs over the edge of the table.

3 With the display open, carefully ip the PowerBook over and rest it on the edge of a table. Make sure the weight of the computer is on the table and not on the display.

Soft cloth Top of display in your lap

Important Do not open the display further than the angle shown above.

Working Inside Your Computer 67

LL2010.Book Page 68 Thursday, March 15, 2001 4:28 PM

4 Remove the battery by sliding the latch to the left. Make sure to return the battery latch fully to the right.

5 Using a small Phillips screwdriver, remove the eight screws that secure the bottom case of the PowerBook in the order shown in the illustration below.

Warning The internal components of your PowerBook may be hot. If you have been using your PowerBook, wait 30 minutes after shutting down your computer to let the internal components cool down before continuing.

7 8

5 2

3

4 1

6

68 Chapter 4

LL2010.Book Page 69 Thursday, March 15, 2001 4:28 PM

6 Carefully slide the bottom case away from you.

7 Pivot the bottom case up as shown in the illustration below.

Important Do not twist the case from side to side. Slide the bottom case forward completely before lifting it up. If you feel any resistance when lifting the bottom case, double-check to make sure the bottom case is slid all the way forward and releases from the DVD slot.

Working Inside Your Computer 69

LL2010.Book Page 70 Thursday, March 15, 2001 4:28 PM

8 If your AirPort Card came with the AirPort adapter, remove the metal clip and pull the AirPort Card from the adapter. (The adapter and metal clip are not used with your PowerBook.)

9 Touch a metal surface inside the computer to discharge any static electricity.

10 Disconnect the AirPort antenna from its holder.

AirPort antenna

70 Chapter 4

LL2010.Book Page 71 Thursday, March 15, 2001 4:28 PM

11 Position the AirPort Card with the AirPort ID numbers and bar code visible and slide the card into the connector. Slide the card all the way in until you feel that the card is securely attached to the connector.

12 Connect the AirPort Card to the end of the antenna cable. Make sure that the connector on the end of the antenna cable is straight before inserting it into the card. When it is connected, make sure the end of the antenna cable is secured by the small clip shown in the illustration below.

13 Fold the plastic tab on the AirPort Card over the top of the card.

AirPort Card

Antenna clip

Important The plastic tab must be folded over the card. If the tab is not folded over, you will not be able to attach the bottom case securely to the computer.

Working Inside Your Computer 71

LL2010.Book Page 72 Thursday, March 15, 2001 4:28 PM

14 Attach the bottom case to the computer and replace the eight screws in the order shown in the illustration below.

Line up the notches on the right and left sides of the case. Then press down slightly to secure the case. Make sure the seams between the bottom case and the frame are closed. Check the outside edges and around the battery bay. Check the alignment of the eight screw holes to make sure the bottom case is properly positioned.

15 Replace the battery and turn the computer over.

2 1

7 6

4

5 8

3

72 Chapter 4

LL2010.Book Page 73 Thursday, March 15, 2001 4:28 PM

16 Look at the DVD drive slot to make sure that the case is properly secured. If a gap exists below the DVD drive slot, gently pull the bottom of the DVD drive slot toward you to secure the DVD drive to the bottom case and remove the gap.

17 Reconnect the power adapter and any other cables that were attached.

DVD drive slot

Working Inside Your Computer 73

LL2010.Book Page 74 Thursday, March 15, 2001 4:28 PM

C H A P T E R

5

LL2010.Book Page 75 Thursday, March 15, 2001 4:28 PM

5 Troubleshooting Occasionally you may have problems while working with your PowerBook. Usually its because your software isnt properly congured or youre using applications or software extensions that are not compatible with the version of the Mac OS (system software) installed on your computer. Other less likely sources include problems with the Mac OS (usually xed by reinstalling your computers system software or through a software update) and problems with your computers hardware, such as the memory or hard disk.

When you experience a problem with your computer, it is important to remember that there is usually a simple and quick solution. When you encounter a problem, be aware of the conditions that led up to the problem. Making a note of things you did before the problem occurred will help you narrow down the possible causes of the problem and then nd the answers you need. Things to note include

m the applications you were using when the problem occurred (Problems that occur only with a specic application may indicate that the application is not compatible with the version of the Mac OS installed on your computer.)

m any software that you recently installed, especially any software that may have added items to the System Folder (Certain applications install extensions that may not be compatible with the version of the Mac OS installed on your computer.)

m any new hardware (such as additional memory or a peripheral) that you installed

Information in This Chapter

This chapter contains solutions to problems that prevent you from working with your computer, such as a system freeze or a computer that will not start up. You can nd more troubleshooting information in Mac Help (see page 38) and on Apples Support Web site at wwww.apple.com/support

75

LL2010.Book Page 76 Thursday, March 15, 2001 4:28 PM

Problems That Prevent You From Using Your Computer

If the computer wont respond or the pointer wont move

m Press the Command (x) and period keys at the same time and, if a dialog box appears, click Cancel.

m If that doesnt work, hold down the Option and Command (x) keys and then press the Esc key. If a dialog box appears, click Force Quit. Then save your work in any open applications and restart the computer to be sure the problem is entirely cleared up.

m If you are unable to force the application to quit, press and hold the Power button () for a few seconds to shut down the computer.

m If the computer still doesnt respond, try to restart it by simultaneously pressing the Command (x) and Control keys on your keyboard and the Power button ().

m If that doesnt work, locate the reset button (see page 18) on the back panel of your computer. Carefully press the button using the tip of a pen. Then press the Power button () to restart it.

Note: You may need to reset the date and time (using the Date & Time control panel) after you use the reset button.

If the problem occurs frequently, choose Mac Help from the Help menu. Look at the section on how to prevent and solve problems. You may need to check for extension conicts or reinstall your computers system software. If the problem occurs only when you use a particular program, check with the programs manufacturer to see if it is compatible with your computer.

If the computer freezes during startup or you see a flashing question mark

m Turn off your system extensions by starting up your computer while holding down the Shift key.

m If that does not work, start up your PowerBook while holding down the C key and at the same time insert your system software CD. (Make sure the Caps Lock key is not engaged.)

After the computer starts up, choose Mac Help from the Help menu. Look at the section on how to prevent and solve problems. You may need to check for extension conicts or reinstall your computers system software.

If using your system software CD is the only way you can start up your PowerBook, you need to reinstall your computers system software. For instructions, look in Mac Help or open the software installation or restore program and follow the onscreen instructions.

76 Chapter 5

LL2010.Book Page 77 Thursday, March 15, 2001 4:28 PM

If the computer wont turn on or start up

m Make sure the power adapter is plugged into the computer and into a functioning power outlet.

m Your battery may need to be recharged. Press the small button on the battery (see page 51). You should see one to four lights indicating the batterys level of charge.

m If that does not work, locate the reset button (see page 18) on the back panel of your computer. Carefully press the button using the tip of a pen.

Note: You may need to reset the date and time (using the Date & Time control panel) after you use the reset button.

m If that does not work, press the Power button () and immediately hold down the Command (x), Option, P, and R keys until you hear the startup sound a second time.

m If you recently installed additional memory, make sure that it is correctly installed and that it is compatible with your computer. See whether removing it allows the computer to start up.

m If you are still unable to start up your computer, see the service and support information that came with your PowerBook for information on contacting Apple for service.

Troubleshooting 77

LL2010.Book Page 78 Thursday, March 15, 2001 4:28 PM

Other Problems

If you have a problem with a software program

m For problems with software from a manufacturer other than Apple, contact the manufacturer. Often software manufacturers provide updates to their software on their Web sites. You can congure your PowerBook to automatically check for and install the latest Apple software using the Software Update control panel. For more information, choose Mac Help from the Help menu and search for software update.

If you have problems with your Internet connection

m Make sure your telephone line or network cable is connected and functioning properly.

m If you are using a dial-up Internet connection, make sure that your telephone cord is plugged into the modem port (marked with the icon W) and not the Ethernet port (marked with the icon G).

m Choose Mac Help from the Help menu. There you will nd how to locate your Internet settings and the contact information for your Internet service provider (if you used the Setup Assistant to get your Internet account).

If you have a problem using your computer or working with the Mac OS

m If the answers to your questions are not in this manual, look in Mac Help for instructions and troubleshooting information.

m Check the Apple Support Web site at www.apple.com/support for the latest troubleshooting information and software updates.

If you suspect a problem with your computer hardware

m You can use the Apple Hardware Test CD to help determine if there is a problem with one of your computers components, such as the memory or processor.

Locating Your Product Serial Number

The serial number for your PowerBook is located on the inside wall of the battery bay. For instructions on removing the battery, see Removing and Replacing the Battery on page 51.

78 Chapter 5

A P P E N D I X

A

LL2010.Book Page 79 Thursday, March 15, 2001 4:28 PM

A Specications This section provides basic product specications. Additional information is available in Apple System Proler on your hard disk and on the Internet at www.apple.com/powerbook and www.apple.com/support

Apple System Profiler

You can use Apple System Proler to nd out detailed information about your specic model of PowerBook, such as the amount of built-in memory, hard disk size, devices connected, and the product serial number.

To access the information in Apple System Proler:

m Choose Apple System Proler from the Apple (K) menu.

Click the triangles in the window to show and

hide information in the different categories.

79

LL2010.Book Page 80 Thursday, March 15, 2001 4:28 PM

PowerBook Specifications

Processor, Memory, and Hard Disk

m Processor: PowerPC G4 processor with a minimum of 400 megahertz (MHz)

Note: Your PowerPC processor can operate at a reduced speed (see page 53) to save battery power. When the reduced processor speed option is enabled, Apple System Proler shows the slower processor speed in addition to the standard speed of the processor.

m Memory: Minimum of 128 megabytes (MB); maximum of 1 gigabyte (GB)

m Hard disk: Minimum 10 GB

Video Memory and Graphics

m Video memory: 8 MB SDRAM

m Graphics controller: ATI RAGE Mobility 128

Modem

m Modem standards: K56ex and V.90

m Modem speed: 53 kilobits per second (Kbps)

Note: Download speeds vary with line conditions and the modem capabilities of your Internet service provider (ISP). FCC regulations limit ISP transmission speeds to 53 Kbps in the United States.

Optional AirPort Card

m Wireless data rate: Up to 11 megabits per second (Mbps)

m Range: Up to 150 feet (45 meters) in typical indoor use (varies with building)

m Frequency band: 2.4 gigahertz (GHz)

Power Adapter

m Input: AC 100240 volts ( V ), 50/60 hertz (Hz)

m Output: DC 24 V, 1.875 A

Battery

m Output: DC 14.4 V

m Capacity: 3600 mAh

80 Appendix A

LL2010.Book Page 81 Thursday, March 15, 2001 4:28 PM

External Monitor in Extended Desktop or Video Mirroring Mode

With the PowerBook G4 display set at 1152 x 768 in millions of colors, an external VGA display supports

m Up to millions of colors in the following resolutions: 512 x 384, 640 x 480, 640 x 870, 800 x 600, 832 x 624, 1024 x 768, and 1152 x 870

m Up to thousands of colors in the following resolutions: 1280 x 960, 1280 x 1024, and 1600 x 1200

Note: Selecting a resolution greater than 1152 x 768 in video mirroring mode causes the image on the external monitor to scale down (not take up the entire screen) to match the 1152 x 768 resolution of the internal display.

External Monitor in Display Closed Mode

m Up to millions of colors in the following resolutions: 640 x 480, 800 x 600, 1024 x 768, 1152 x 870, 1280 x 960, 1280 x 1024, and 1600 x 1200

m Up to thousands of colors in the following resolutions: 1792 x 1344 and 1856 x 1392

External S-Video or Composite Television (NTSC)

m Up to millions of colors in the following resolutions: 512 x 384, 640 x 480, 720 x 480 (NTSC only), 800 x 600, 832 x 624, and 1024 x 768 at 60 Hz

External S-Video or Composite Television (PAL)

m Up to millions of colors in the following resolutions: 512 x 384, 640 x 480, 720 x 576, 800 x 600, 832 x 624, and 1024 x 768 at 50 Hz

Note: Playback of DVD movies on an external monitor or television reduces the amount of video memory available for display. Fewer colors may be available at certain higher resolutions.

Size and Weight

m Height: 1.0 in. (26 mm)

m Width: 13.4 in. (341 mm)

m Depth: 9.5 in. (241 mm)

m Weight: 5.3 lbs. (2.4 kg)

Note: Weight varies depending on conguration and manufacturing process.

Operating Environment

m Operating temperature: 50F to 95F (10C to 35C)

m Storage temperature: 13F to 140F (25C to 60C)

m Altitude: 3048 m (10,000 ft.) maximum

m Shipping altitude: 10668 m (35,000 ft.) maximum

m Relative humidity: 20% to 80% noncondensing

Specifications 81

LL2010.Book Page 82 Thursday, March 15, 2001 4:28 PM

A P P E N D I X

B

LL2010.Book Page 83 Thursday, March 15, 2001 4:28 PM

B Care, Use, and Safety Information

Cleaning Your PowerBook

Follow these general rules when cleaning the outside of your computer and its components:

m Use a damp, soft, lint-free cloth to clean the computers exterior. Avoid getting moisture in any openings.

m Dont use aerosol sprays, solvents, or abrasives.

Cleaning Your PowerBook Display

To clean your PowerBook screen, do the following:

m With your PowerBook shut down, dampen a clean, soft, lint-free cloth or paper with water only and wipe the screen. Do not spray liquid directly on the screen.

Carrying Your PowerBook

If you carry your PowerBook in a bag or briefcase, make sure that there are no loose items (such as paper clips or coins) that could accidentally get inside the computer through the slot for the DVD drive.

Storing Your PowerBook

If you are going to store your PowerBook for an extended period of time, do one of the following to prevent your PowerBook battery from becoming completely depleted:

m Keep the power adapter connected.

m Fully charge your PowerBook battery before storing the computer.

m Fully charge and then remove your PowerBook battery when storing your computer (especially important when storing your computer for longer than 5 months).

83

LL2010.Book Page 84 Thursday, March 15, 2001 4:28 PM

Safety Instructions for Setting Up and Using Your Computer

Plugging In the Power Adapter

Always leave space around your power adapter. Do not use this equipment in a location where airow around the power adapter is conned. Always disconnect the power adapter and remove the battery before opening the computer to perform procedures such as installing memory or removing the hard disk.

Connecting a Phone Line to the Internal Modem

Always disconnect the phone cord before opening the computer to perform procedures such as installing memory or removing the hard disk.

Using Your PowerBook

When using your PowerBook or when charging the battery, it is normal for the bottom of the case to get warm. The bottom of the PowerBook case functions as a cooling surface that transfers heat from inside the computer to the cooler air outside. The bottom of the case is raised slightly to allow airow that keeps the unit within normal operating temperatures.

Warning Use only the power adapter that came with your PowerBook computer. Adapters for other electronic devices (including other PowerBook models and other portable computers) may look similar, but they may damage your computer. If your power adapter came equipped with a three-wire grounding plug (a plug that has a third grounding pin), then this plug will t only a grounded AC outlet. If you are unable to insert the plug into the outlet because the outlet is not grounded, contact a licensed electrician to replace the outlet with a properly grounded outlet. Do not defeat the purpose of the grounding plug!

Warning Do not connect a digital telephone line to the modem, because the wrong type of line could damage the modem.

Warning Never turn on your computer unless all of its internal and external parts are in place. Operating the computer when it is open or missing parts can be dangerous and damage your computer.

84 Appendix B

LL2010.Book Page 85 Thursday, March 15, 2001 4:28 PM

General Safety Instructions

For your own safety and that of your equipment, always take the following precautions.

Disconnect the power plug (by pulling the plug, not the cord), remove the main battery, and disconnect the phone cord if any of the following conditions exists:

m You want to remove any parts (leave the cords disconnected as long as the keyboard is open)

m The power cord or plug becomes frayed or otherwise damaged

m You spill something into the case

m Your computer is exposed to rain or any other excess moisture

m Your computer has been dropped or the case has been otherwise damaged

m You suspect that your computer needs service or repair

m You want to clean the case (use only the recommended procedure described earlier)

Be sure that you always do the following:

m Keep your computer away from sources of liquids, such as drinks, washbasins, bathtubs, shower stalls, and so on.

m Protect your computer from dampness or wet weather, such as rain, snow, and so on.

m Read all the installation instructions carefully before you plug your computer into a wall socket.

m Keep these instructions handy for reference by you and others.

m Follow all instructions and warnings dealing with your system.

Important The only way to disconnect power completely is to unplug the power cord and phone cords, and remove the battery. Make sure at least one end of the power cord is within easy reach so that you can unplug the computer when you need to.

Warning Electrical equipment may be hazardous if misused. Operation of this product, or similar products, must always be supervised by an adult. Do not allow children access to the interior of any electrical product and do not permit them to handle any cables.

Warning Never push objects of any kind into this product through the openings in the case. Doing so may be dangerous and result in re or a dangerous electric shock.

Care, Use, and Safety Information 85

LL2010.Book Page 86 Thursday, March 15, 2001 4:28 PM

Ergonomics

Keyboard and trackpad

When you use the keyboard and trackpad, your shoulders should be relaxed. Your upper arm and forearm should form an angle that is slightly greater than a right angle, with your wrist and hand in roughly a straight line.

Use a light touch when typing or using the trackpad and keep your hands and ngers relaxed. Avoid rolling your thumbs under your palms.

Change hand positions often to avoid fatigue. Some computer users may develop discomfort in their hands, wrists, or arms after intensive work without breaks. If you begin to develop chronic pain or discomfort in your hands, wrists, or arms, consult a qualied health specialist.

Chair

An adjustable chair that provides rm, comfortable support is best. Adjust the height of the chair so your thighs are horizontal and your feet at on the oor. The back of the chair should support your lower back (lumbar region). Follow the manufacturers instructions for adjusting the backrest to t your body properly.

You may have to raise your chair so your forearms and hands are at the proper angle to the keyboard. If this makes it impossible to rest your feet at on the oor, you can use a footrest with adjustable height and tilt to make up for any gap between the oor and your feet. Or you may lower the desktop to eliminate the need for a footrest. Another option is to use a desk with a keyboard tray thats lower than the regular work surface.

This Not this

This Not this

86 Appendix B

LL2010.Book Page 87 Thursday, March 15, 2001 4:28 PM

External mouse

If you use an external mouse, position the mouse at the same height as your keyboard and within a comfortable reach.

Built-in display

Adjust the angle of the display to minimize glare and reections from overhead lights and windows.

You can adjust the brightness of the screen when you take the computer from one work location to another, or if the lighting in your work area changes.

For more information

Go to www.apple.com/about/ergonomics

Care, Use, and Safety Information 87

88 Communications, Telephone, and Modem Regulation Information

Communications, Telephone, and Modem Regulation Information

For information on FCC regulations, radio and television interference, and telephone and modem information as it relates to this product, see the les in the Communications Regulations folder, inside the Documents folder on your hard disk.

Laser Information

Do not attempt to disassemble the cabinet containing the laser. The laser beam used in this product is harmful to the eyes. The use of optical instruments, such as magnifying lenses, with this product increases the potential hazard to your eyes. For your safety, have this equipment serviced only by an Apple-authorized service provider.

Your computer is a Class 1 laser product. The Class 1 label, located in a user-accessible area, indicates that the drive meets minimum safety requirements. A service warning label is located in a service-accessible area. The labels on your product may differ slightly from the ones shown here.

Laser Specifications

Laser on pickup unit (when reading a CD)

m Type: Semiconductor GaAlAs laser

m Wavelength: 790 nm

m Power out of objective lens: 3.3 mW

m Beam divergence: horizontal 12 vertical 35

Laser on pickup unit (when reading a DVD)

m Type: Semiconductor GaAs laser

m Wavelength: 658 nm

m Power out of objective lens: 6 mW

m Beam divergence: horizontal 8.5 vertical 27

High-Risk Activities Warning

This computer system is not intended for use in the operation of nuclear facilities, aircraft navigation or communications systems, or air trafc control machines, or for any other uses where the failure of the computer system could lead to death, personal injury or severe environmental damage.

ENERGY STAR

As an ENERGY STAR partner, Apple Computer has determined that standard congurations of this product meet the ENERGY STAR guidelines for energy efciency. The United States Environmental Protection Agencys ENERGY STAR program is a partnership with ofce product equipment manufacturers to promote energy- efciency. Reducing energy consumption of ofce products saves money and reduces pollution by eliminating wasted energy.

Warning Making adjustments or performing procedures other than those specied in

Manualsnet FAQs

If you want to find out how the G4 Apple works, you can view and download the Apple PowerBook G4 15 Inch Original Manual on the Manualsnet website.

Yes, we have the Manual for Apple G4 as well as other Apple manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Manual should include all the details that are needed to use a Apple G4. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Apple PowerBook G4 15 Inch Original Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Apple PowerBook G4 15 Inch Original Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Apple PowerBook G4 15 Inch Original Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Apple PowerBook G4 15 Inch Original Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Apple PowerBook G4 15 Inch Original Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.