Contents

Apple Mac Pro RAID Card Installation Guide PDF

1 of 136
1 of 136

Summary of Content for Apple Mac Pro RAID Card Installation Guide PDF

Mac Pro RAID Card

English

3

1 Installing the Mac Pro RAID Card

Follow the instructions in this guide to install a Mac Pro RAID Card in an Intel-based Mac Pro computer.

Before You Begin

Review these guidelines before you install the Mac Pro RAID Card. The installation of the Mac Pro RAID card requires the removal and reinstallation of some internal system components. If you are not comfortable with conducting the installation process, please see an Apple Retail Store or Apple Authorized Service Provider to have the card installed by a professional technician.

Back Up Important Files

The process of creating RAID sets erases all files on the drive modules in your Mac Pro. Be sure to copy important files to another location before you install the RAID card.

Which Mac Pro Do You Have?

The RAID card installation instructions vary slightly depending on whether you are installing the card in a quad-core Mac Pro or an 8-core Mac Pro.

Identifying an 8-core Mac Pro

Look at the label on the back panel or use System Profiler to identify an 8-core Mac Pro.

Checking the back-panel label: m

Look at the configuration label, located below the video ports. On an 8-core Mac Pro computer, the first line includes the EMC number 2138 and the second line includes 3.0_8cx.

Using System Profiler: m

If the system is running, choose About This Mac from the Apple menu. The processor in an 8-core Mac Pro is listed as 2 x 3 GHz Quad-Core Intel Xeon.

4

English

Choosing Drive Modules

For best results, use four identical disk drives. The size of any RAID set you create is limited by the size of the smallest drive in the set. Additional space on larger drives in the set cant be used.

Working Safely Inside the Mac Pro

Always touch the Mac Pro chassis while it is still plugged in to discharge static electricity before you touch any components inside. To avoid generating static electricity, do not walk around the room until you have finished working inside the Mac Pro and have replaced the cover. To minimize the possibility of damage due to static discharge, wear an antistatic wrist strap while you work inside the Mac Pro.

Important:

Hold printed circuit boards by their edges. Never touch the gold contacts or other exposed metallic components on the boards. Handle the boards gently and dont bend or flex them.

Tools Youll Need

Youll use the following tools and fasteners, most included in the kit, to install the RAID card in your Mac Pro:

90-degree Phillips screwdriver

Mounting post wrench

Replacement screws

A straight shaft, medium Phillips screwdriver (not included)

Installing the Card

Follow the instructions on the following pages to install the RAID card in your Mac Pro.

Note:

The instructions vary slightly depending on whether you are installing the RAID card in a quad-core or 8-core Mac Pro. For help identifying your computer, see Which Mac Pro Do You Have? on page 3.

WARNING:

Always shut down the Mac Pro and disconnect the power cord before opening it to avoid damaging its internal components or the components you are installing. Dont open the Mac Pro while it is turned on. Even after you shut down the Mac Pro, its internal components can be very hot. Let it cool before you open it.

Screwdriver Wrench Replacement screws (2)

English

5

Step 1: Shut down and unplug your Mac Pro

1

Shut down your Mac Pro by choosing Apple > Shut Down, and then wait a few minutes to let the internal components cool.

2

Touch the metal on the outside of your Mac Pro while its still plugged in to discharge any static electricity from your body.

3

Unplug the power cord and disconnect all cables from the computer.

6

English

Step 2: Open the case

1

While holding the side panel, lift the latch on the rear of the case.

2

Remove the side panel and set it aside.

WARNING:

Even after you shut down the Mac Pro, its internal components can be very hot. Let it cool before you open it.

English

7

Step 3: Remove the drive modules m

Make sure the latch on the back panel is still open, and then pull out all four drive modules and empty carriers.

Latch

8

English

Step 4: Remove the PCI Express cards

1

Loosen the two thumbscrews on the bracket that holds the PCI Express cards in place and remove the bracket and the port access cover for slot 4 (the top slot).

2

Disconnect any cables that are connected to the graphics card in slot 1 (the bottom slot), and then reach behind the card, lift the latch on the card connector, and pull the card out of the slot.

3

Repeat to remove any other PCI Express cards.

Important:

Note which slot each card comes from so you can return it to the same slot.

PCI bracketPort access cover

Latch

Graphics card

English

9

Step 5: Remove the CPU cover

The steps for removing the CPU cover depend on whether you have a quad-core Mac Pro or an 8-core Mac Pro. For help identifying your computer, see Which Mac Pro Do You Have? on page 3.

If you have an 8-core Mac Pro: m

Lift up on the back edge of the CPU cover and remove it. Then go on to Step 6 on page 12.

If you have a quad-core Mac Pro: 1

(Quad-core only) Remove the memory cards and set them aside.

Important:

Note which slot each card comes from so you can return it to the same slot.

CPU cover

10

English

2

(Quad-core only) Remove the two long screws from the back of the DIMM cage.

3

(Quad-core only) Insert the mounting post wrench between the DIMM cage and the chassis and around the post to keep it from turning, and then use the 90-degree screwdriver to remove the two screws on the bottom front edge of the DIMM cage.

For easiest removal, use the supplied 90-degree screwdriver and seat the screwdriver fully into the screw slots. Dont let the screwdriver slip out of the screw head as you turn it.

Important:

Dont pinch any wires between the wrench and the mounting posts.

Long screws (2) Screwdriver

Screwdriver

DIMM cage

Wrench

Chassis

Short screws (2)

Wrench

English

11

4

(Quad-core only) Without removing the DIMM cage, slide it to the right, toward the back panel of the computer, to open a gap between the DIMM cage and the CPU cover.

If you have trouble, try using one hand inside the cage to press the right end of the cage to the right, toward the back panel of the computer, as you pull out slightly on the left-front edge of the cage with your other hand. The DIMM cage should separate slightly from the CPU cover.

5

(Quad-core only) Pull the bottom edge of the CPU cover slightly toward you, rotate it to the right, and remove the cover.

CPU cover

Gap

DIMM cage

CPU cover

12

English

Step 6: Remove the fan module

1

Remove the screws that hold the fan module in place.

If you have an 8-core Mac Pro:

There are two screws: one at the upper-right rear corner and a second at the lower- right front corner.

If you have a quad-core Mac Pro:

There is a single screw at the upper-right rear corner of the module that secures it to the main logic board.

2

Slide the fan module out of the chassis. If you have difficulty, try pulling as low as possible on the module, wiggling the module as you pull. It may help to lay the computer on its side so you are pulling the module upward.

Fan module

Fan module screw

Second screw (not present on quad-core Mac Pro)

Fan module

Pull from here.

English

13

Step 7: Disconnect and reroute the iPass cable

1

Press to release the connector lock on the iPass cable and unplug the cable from the main logic board.

2

If necessary, disentangle the iPass cable from other cables running through the same area so that the loose end of the iPass cable extends toward the PCI connectors as far as possible.

You may need to disconnect other cables to reroute the iPass cable so its connector extends far enough toward the PCI slots. When you can get the iPass cable connector within approximately one and one-quarter inches of the heatsink shown in the illustration, you should have enough slack to connect it to the RAID card in step 9.

Be sure to reconnect any other cables you disconnect while rerouting the iPass cable.

iPass cable

Connector lock

Before rerouting

iPass cable

Heatsink

After rerouting

14

English

Step 8: Connect the RAID battery m

On the RAID card, connect the small battery cable to the connector next to the battery on the card.

Step 9: Connect the iPass cable and install the RAID card

1

While holding the RAID card inside the chassis, connect the iPass cable to the connector on the card. You should hear a click when the connector is fully seated.

2

Slide the RAID card into the top PCI Express slot (slot 4). Check that the card is fully seated in the connector.

Important:

The Mac Pro RAID Card must be installed in PCI Express slot 4, the top slot.

If the iPass cable prevents you from installing the card, disconnect the cable and reroute it to provide more slack.

Battery cable

Connector on card

Connector on card

iPass cable

English

15

Step 10: Install the fan module

1

Align the guide on the bottom of the fan module with the fan module guide on the floor of the chassis and slide the fan module into the chassis.

Make sure the iPass cable goes behind the module, below the mounting arm, and that the end of the RAID card slides into card guide 4 on the fan module.

2

Install the screws that secure the fan module.

If you have an 8-core Mac Pro:

There are two screws: one at the upper-right rear corner and a second at the lower- right front corner.

If you have a quad-core Mac Pro:

There is a single screw at the upper-right rear corner of the module that secures it to the main logic board.

Screw

Card guide 4

Mounting arm

Fan module guide

Second screw (not present on quad-core Mac Pro)

16

English

Step 11: Install the CPU cover

The steps required depend on whether you have a quad-core or an 8-core Mac Pro.

If you have an 8-core Mac Pro: m

Position the bottom front edge of the cover and then rotate the top back until the magnets snap it into place. Then go on to Step 12 on page 18.

If you have a quad-core Mac Pro: 1

With the front face of the cover rotated to overlap the front of the DIMM cage, insert the top-left edge of the cover under the retainer on the fan module just below PCI card support slot 1 and then rotate the cover into place.

Make sure the edge of the cover is not in the support slot for PCI slot 1 on the fan module.

CPU cover

CPU cover

Bottom plastic retainer

Card guide 1

English

17

2

(Quad-core only) Slide the DIMM cage to the right, toward the back panel, and snap the CPU cover between the DIMM cage and the fan module. Jiggle the DIMM cage and CPU cover left and right as you seat the CPU cover so it is flush with the front face of the fan module and the top and front faces of the DIMM cage.

3

(Quad-core only) Install the two long screws at the back of the DIMM cage. Dont overtighten the screws; snug is adequate.

CPU cover

DIMM cage

Long screws (2) Screwdriver

18

English

4

(Quad-core only) Install the two replacement screws (provided in the kit) in the bottom front edge of the DIMM cage. Dont overtighten the screws; snug is adequate.

Step 12: Install the graphics card and any other PCI Express cards

1

Install the graphics card in slot 1, the bottom slot nearest the DIMM cage. If you had to disconnect a cable from the card to remove it, reconnect the cable.

2

Install any other PCI Express cards that you removed.

Screwdriver

Replacement screws (2)

Graphics card

English

19

3

Replace the bracket that holds the cards in place.

Step 13: Replace the drive modules m

Make sure the rear latch is up, and then slide in the drive modules and blanks.

PCI bracket

Latch

20

English

Step 14: (Quad-core only) Replace the memory cards m

Slide the memory cards back into the DIMM cage.

You may find this easier if you lay the computer on its side.

Important:

Be sure you return each memory card to the same slot you removed it from.

Step 15: Replace the side panel

1

Insert the lower edge of the side panel into the chassis and rotate the top closed.

2

Close the latch.

Step 16: Reconnect external cables and the power cord

Youre now ready to use the RAID Utility application to set up RAID volumes.

Using RAID Utility to Create RAID Volumes

When you are finished installing the Mac Pro RAID Card, you can set up RAID volumes using the RAID Utility application. To use RAID Utility, start up your computer using a Mac OS X or Mac OS X Server version 10.5 or later installation disc. Youll find RAID Utility in the Utilities menu that appears after the installer opens and you choose your language.

For information about using RAID Utility to set up and manage RAID volumes, see the

RAID Utility Users Guide

, available at www.apple.com/server/documentation.

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

Franais 39

1 Installation de la carte RAID pour Mac Pro

Suivez les instructions de ce guide pour installer une carte RAID pour Mac Pro dans un ordinateur Mac Pro bas sur Intel.

Avant de commencer Lisez attentivement ces instructions avant dinstaller la carte RAID pour Mac Pro. Lins- tallation de la carte Mac Pro Raid ncessite le retrait et la rinstallation de certains com- posants systme internes. Si vous ntes pas sr de matriser le processus dinstallation, consultez un magasin ou un fournisseur de services agr Apple pour que la carte soit installe par un technicien professionnel.

Sauvegardez vos fichiers importants Le processus de cration des ensembles RAID efface tous les fichiers contenus sur les modules de disques de votre Mac Pro. Assurez-vous de copier les fichiers importants vers un autre emplacement avant dinstaller la carte RAID.

Quel est votre modle de Mac Pro ? Les instructions dinstallation de la carte RAID varient lgrement selon si vous installez la carte dans un Mac Pro quatre curs ou huit curs.

Identification dun Mac Pro huit curs Consultez la plaquette situe sur le panneau arrire ou utilisez les Informations Systme pour identifier un Mac Pro huit curs.

Consultez la plaquette du panneau arrire : m Lisez la plaquette de configuration, situe sous les ports vido. Sur un ordinateur

Mac Pro huit curs, la premire ligne inclut le numro EMC 2138 et la seconde ligne le code 3.0_8cx.

Utilisation des Informations Systme : m Lorsque le systme sexcute, choisissez A propos de ce Mac dans le menu Apple. Le

processeur dans un Mac Pro huit curs est prsent de la faon suivante 2 x 3 GHz Quad-Core Intel Xeon .

40 Franais

Choix de modules de disque Pour de meilleurs rsultats, utilisez quatre disques identiques. La taille dun ensemble RAID que vous crez est limite par la taille du plus petit disque de lensemble. Dans lensemble, lespace supplmentaire des disques de plus grande capacit ne peut pas tre utilis.

Manipulation lintrieur de Mac Pro Touchez toujours le chssis de Mac Pro lorsquil est branch afin de vous dcharger de llectricit statique avant de toucher tout composant situ lintrieur de celui-ci. Pour viter la gnration dlectricit statique, ne vous dplacez pas dans la pice avant davoir termin votre manipulation lintrieur de Mac Pro et davoir remis en place son couvercle. Pour rduire la possibilit de dommages dues llectricit statique, por- tez un bracelet anti-statique autour du poignet lorsque vous manipulez des compo- sants internes de Mac Pro.

Important : Maintenez les cartes de circuits imprims par les cts. Veillez ne jamais toucher les contacts en or et les autres composants metalliques accessibles prsents sur les cartes. Manipulez les cartes avec prcaution, ne les pliez pas et nexercez aucune pression dessus.

Outils ncessaires Utilisez les outils et lquipement suivants (dont la plupart sont inclus avec le kit) pour installer la carte RAID dans votre Mac Pro : Tournevis Phillips 90 degrs Cl pour poteau de montage Vis de remplacement Tournevis Phillips moyen et droit (non inclus)

Installation de la carte Suivez les instructions des pages suivantes pour installer la carte RAID dans votre Mac Pro.

AVERTISSEMENT : teignez le Mac Pro et dbranchez le cordon dalimentation avant de louvrir pour viter tout dommage aux composants internes ou ceux que vous souhaitez installer. Ne tentez pas douvrir le chssis de Mac Pro lorsque celui-ci est allum. Mme aprs avoir teint le Mac Pro, ses composants internes peuvent prsenter une temprature leve. Laissez-les refroidir avant douvrir le chssis.

Tournevis Cls Vis de remplacement

Franais 41

Remarque : Les instructions varient lgrement selon si vous installez la carte RAID dans un Mac Pro quatre curs ou huit curs. Pour vous aider identifier votre modle dordinateur, consultez la rubrique Quel est votre modle de Mac Pro ? la page 39.

tape 1 : Extinction et dbranchement de votre Mac Pro 1 teignez votre Mac Pro en slectionnant Apple > teindre, puis patientez quelques

minutes pour laisser refroidir les composants internes.

2 Touchez le mtal de la partie extrieure du chssis de Mac Pro lorsque celui-ci est branch afin de dcharger llectricit statique de votre corps.

3 Dbranchez le cordon dalimentation ainsi que tous les cbles connects votre ordinateur.

42 Franais

tape 2 : Ouverture du chssis 1 Tout en maintenant le panneau latral, soulevez le loquet situ larrire du chssis.

2 Retirez le panneau latral et mettez-le de ct.

AVERTISSEMENT : Mme aprs avoir teint le Mac Pro, ses composants internes peuvent prsenter une temprature leve. Laissez-les refroidir avant douvrir le chssis.

Franais 43

tape 3 : Dbranchement des modules de disque m Assurez-vous que le loquet du panneau arrire est toujours ouvert, puis sortez

les quatre modules de disque en les retirant de leur support.

tape 4 : Dvissage des cartes PCI Express 1 Dvissez les deux vis situes sur le support maintenant en place les cartes PCI Express

et retirez-le ainsi que la trappe daccs aux ports de lemplacement 4 (lemplacement du haut).

Verrou

Patte PCI Couvercle de laccs au port

44 Franais

2 Dbranchez tous les cbles qui sont connects la carte graphique et sur lemplace- ment 1 (lemplacement du bas), puis, derrire la carte, saisissez le loquet pour le soule- ver du connecteur de carte et retirer la carte de son emplacement.

3 Rptez lopration pour retirer toutes les cartes PCI Express.

Important : Notez lemplacement de chaque carte pour pouvoir les replacer sur les mmes emplacements.

tape 5 : Dplacement du cache du processeur Les tapes pour retirer le cache du processeur dpendent du modle de votre Mac Pro, quatre curs ou huit curs. Pour vous aider identifier votre modle dordinateur, consultez la rubrique Quel est votre modle de Mac Pro ? la page 39.

Verrou

Carte graphique

Franais 45

Si vous possdez un Mac Pro huit curs : m Soulevez la partie arrire du cache du processeur pour le retirer. Passez ensuite

ltape 6 de la page 48.

Si vous possdez un Mac Pro quatre curs : 1 (Quatre curs uniquement) Retirez les barrettes de mmoire et mettez-les de ct.

Important : Notez lemplacement de chacun delles pour pouvoir les replacer sur les mmes emplacements.

Couvercle CPU

46 Franais

2 (Quatre curs uniquement) Retirez les deux longues vis situes larrire du logement des barrettes DIMM.

3 (Quatre curs uniquement) Insrez la cl pour poteau de montage entre le logement des barrettes DIMM et le chssis et placez-la sur le poteau pour lempcher de tourner, puis utilisez le tournevis 90 degrs pour retirer les deux vis situes sur le bord avant bas du logement des barrettes DIMM.

Pour plus de facilit, utilisez le tournevis 90 degrs fourni et insrez-le totalement dans le logement des vis. Veillez ce que le tournevis ne glisse pas de la tte des vis lorsque vous le tournez.

Grandes vis (2) Tournevis

Franais 47

Important : Veillez ne pas pincer les cbles entre la cl et les poteaux de montage.

4 (Quatre curs uniquement) Sans retirer le logement des barrettes DIMM, faites-le glis- ser vers la droite, vers le panneau arrire de lordinateur, pour laisser un espace entre le logement DIMM et le cache du processeur.

Si vous ny arrivez pas, utilisez une main pour dplacer le cache vers la droite en appuyant sur son extrmit droite, en direction du panneau arrire de lordinateur, tandis que vous soulevez lgrement le bord avant gauche du cache de lautre main. Le logement des barrettes DIMM se dtache lgrement du cache du processeur.

Tournevis

Cage DIMM

Cl

Chssis

Petites vis

Cl

Couvercle CPU

Trou

Cage DIMM

48 Franais

5 (Quatre curs uniquement) Tirez le bord bas du cache du processeur lgrement vers vous, faites le tourner vers la droite, puis retirez-le.

tape 6 : Extraction du module de ventilation 1 Retirez les vis maintenant le module de ventilation en place.

Si vous possdez un Mac Pro huit curs : Il y a deux vis : lune dans le coin arrire suprieur droit et la seconde dans le coin avant infrieur droit.

Si vous possdez un Mac Pro quatre curs : Il ny a quune seule vis dans le coin arrire suprieur droit du module qui le fixe la carte mre.

Couvercle CPU

Module de ventilation

Vis du module de ventilation

Deuxime vis (pas sur les Mac Pro quad-core)

Franais 49

2 Faites glisser le module de ventilation hors du chssis. Si vous rencontrez des difficul- ts, tirez le module vers le bas autant que possible, et remuez-le en le tirant. Cette op- ration devrait vous aider dsolidariser le module du reste de lordinateur avant de le tirer vers le haut.

Module de ventilation

Tirer partir dici.

50 Franais

tape 7 : Dbranchement du cble iPass 1 Appuyez pour librer le verrou du connecteur du cble iPass puis dbranchez le cble

de la carte mre.

2 Si ncessaire, dnouez le cble iPass des autres cbles de cette zone afin que lextrmit lche du cble iPass stende autant que possible en direction des connecteurs PCI.

Vous devrez probablement dbrancher les autres cbles pour rorienter le cble iPass afin que son connecteur atteigne les emplacements PCI. Lorsque le connecteur du cble iPass nest plus qu environ trois centimtres du dissipateur thermique montr dans lillustration, vous devriez avoir suffisamment de marge pour le connecter la carte RAID dans ltape 9.

Assurez-vous de rebrancher tous les autres cbles que vous avez dbranchs lorsque vous avez rorient le cble iPass.

Cble iPass

Verrou de connecteur

Avant le racheminement

Cble iPass

Dissipateur thermique

Aprs le racheminement

Franais 51

tape 8 : Branchement de la pile RAID m Sur la carte RAID, connectez le cble de la petite pile au connecteur situ ct de

la pile sur la carte.

tape 9 : Connexion du cble iPass et installation de la carte RAID 1 En maintenant la carte RAID dans le chssis, connectez le cble iPass au connecteur

sur la carte. Vous devriez entendre un dclic lorsque le connecteur est en place.

2 Faites glisser la carte RAID dans lemplacement PCI Express suprieur (emplacement 4). Vrifiez que la carte est totalement insre dans le connecteur.

Important : La carte RAID de Mac Pro doit tre installe dans lemplacement PCI Express 4, lemplacement du haut.

Si le cble iPass vous empche dinstaller la carte, dbranchez le cble et replacez-le pour obtenir plus de marge.

Cble de batterie

Connecteur sur carte

Connecteur sur carte

Cble iPass

52 Franais

tape 10 : Installation du module de ventilation 1 Alignez le bas du module de ventilation avec le repre situ sur le fond du chssis

et faites glisser le module de ventilation dans le chssis.

Assurez-vous que le cble iPass passe derrire le module, sous le bras de montage, et que lextrmit de la carte RAID se glisse dans la glissire de lemplacement 4 sur le module de ventilation.

2 Revissez les vis maintenant le module de ventilation en place.

Si vous possdez un Mac Pro huit curs : Il y a deux vis : lune dans le coin arrire suprieur droit et la seconde dans le coin avant infrieur droit.

Si vous possdez un Mac Pro quatre curs : Il ny a quune seule vis dans le coin arrire suprieur droit du module qui le fixe la carte mre.

Vis

Guide de carte 4

Bras de montage

Guide du module de ventilation

Deuxime vis (pas sur les Mac Pro quad-core)

Franais 53

tape 11 : Installation du cache du processeur Les tapes requises pour installer le cache du processeur dpendent du modle de votre Mac Pro, quatre curs ou huit curs.

Si vous possdez un Mac Pro huit curs : m Placez le bord avant bas du cache puis faites tourner le bord arrire haut jusqu ce

que les aimants entrent en contact. Passez ensuite ltape 12 de la page 56.

Si vous possdez un Mac Pro quatre curs : 1 Une fois que la face avant du cache est place de manire couvrir lavant du loge-

ment des barrettes DIMM, insrez le bord suprieur gauche du cache sous le dispositif de retenue du module de ventilation, juste en dessous de lemplacement 1 de support de carte PCI, puis orientez le cache jusqu sa position dfinitive.

Couvercle CPU

54 Franais

Vrifiez que le bord du cache nest pas dans lemplacement 1 du support de carte PCI sur le module de ventilation.

2 (Quatre curs uniquement) Faites glisser le logement des barrettes DIMM vers la droite, en direction du panneau arrire de lordinateur, puis insrez le cache du processeur entre le logement DIMM et le module de ventilation. Faites bouger le module DIMM et le cache du processeur de gauche droite en plaant le cache du processeur afin quil sencastre avec la face avant du module de ventilation et avec les faces avant et suprieure du loge- ment DIMM.

Couvercle CPU

Support plastique du fond

Guide de carte 1

Couvercle CPU

Cage DIMM

Franais 55

3 (Quatre curs uniquement) Installez les deux longues vis larrire du logement des barrettes DIMM. Ne les serrez pas trop.

4 (Quatre curs uniquement) Installez les deux vis de remplacement (fournies dans le kit) sur le bord avant infrieur du logement des barrettes DIMM. Ne les serrez pas trop.

Grandes vis (2) Tournevis

Tournevis

Vis de remplacement (2)

56 Franais

tape 12 : Installation de la carte graphique et des autres cartes PCI Express 1 Installez la carte graphique dans lemplacement 1, lemplacement du bas le plus pro-

che du logement des barrettes DIMM. Si vous avez t dans lobligation de dbrancher un cble de la carte pour la retirer, rebranchez-le.

2 Installez toutes les autres cartes PCI Express que vous aviez retires.

3 Replacez le bras maintenant les cartes en place.

Carte graphique

Patte PCI

Franais 57

tape 13 : Replacement des modules de disque m Vrifiez que le loquet arrire est en position haute, puis replacez les modules de disque

dans leur support.

tape 14 : (Quatre curs uniquement) Replacement des barrettes de mmoire m Rinsrez les barrettes de mmoire dans le logement DIMM.

Cette opration est probablement plus facile si vous posez lordinateur sur le flanc.

Important : Assurez-vous de replacer chaque barrette sur lemplacement dont vous laviez retire.

tape 15 : Replacement du panneau latral 1 Insrez le bord infrieur du panneau latral dans le chssis et orientez le bord

suprieur pour le fermer.

2 Refermez le loquet.

tape 16 : Rebranchement des cbles externes et du cordon dalimentation Vous tes dornavant prt utiliser lapplication Utilitaire RAID pour configurer les volumes RAID.

Verrou

58 Franais

Utilisation de lUtilitaire RAID pour crer des volumes RAID Lorsque vous avez fini dinstaller la carte RAID pour Mac Pro, vous pouvez configurer des volumes RAID laide de lapplication Utilitaire RAID. Pour utiliser lUtilitaire RAID, allumez votre ordinateur en excutant Mac OS X ou Mac OS X Server version 10.5 ou suprieure, ou un disque dinstallation plus rcent. Vous trouverez lUtilitaire RAID dans le menu Utilitaires qui apparat aprs louverture du programme dinstallation et une fois que vous aurez choisi votre langue.

Pour plus dinformations sur lutilisation de lUtilitaire RAID pour configurer et grer des volumes RAID, consultez le RAID Utility Users Guide, disponible ladresse www.apple.com/server/documentation.

Deutsch 59

1 Installieren der Mac Pro RAID-Karte

Bitte installieren Sie die Mac Pro RAID-Karte anhand der folgenden Anleitungen in einem Mac Pro mit Intel-Prozessor.

Vorbereitungen Lesen Sie die folgenden Richtlinien bitte sorgfltig durch, bevor Sie die Mac Pro RAID-Karte installieren. Die Installation der Mac Pro RAID-Karte erfordert das Aus- und wieder Einbauen einiger interner Systemkomponenten. Wenn Sie mit derartigen Instal- lationsvorgngen nicht vertraut sind, wenden Sie sich an einen Apple Retail Store (sofern vorhanden) oder einen Apple Autorisierten Service-Partner, um die Karte von einem qualifizierten Techniker installieren zu lassen.

Sichern wichtiger Dateien Beim Einrichten von RAID-Systemen werden alle Dateien auf den Laufwerksmodulen Ihres Mac Pro-Computers gelscht. Kopieren Sie daher wichtige Dateien unbedingt an einen anderen Speicherort, bevor Sie die RAID-Karte installieren.

Ermitteln der Mac Pro-Modellversion Die Installationsanleitungen fr die RAID-Karte variieren leicht, abhngig davon, ob Sie die Karte in einem Quad-Core- oder 8-Core-Mac Pro-Computer installieren.

Erkennen eines 8-Core-Mac Pro-Computers Betrachten Sie das Etikett an der Rckseite oder verwenden Sie das Programm System Profiler, um festzustellen, ob Sie mit einem 8-Core Mac Pro-Computer arbeiten.

Prfen des Etiketts an der Rckseite m Sehen Sie sich das Konfigurationsetikett unter den Videoanschlssen an. Bei einem

8-Core-Mac Pro-Computer enthlt die erste Zeile die EMC-Nummer 2138 und die zweite Zeile 3.0_8cx.

Verwenden des Programms System Profiler m Whlen Sie bei eingeschaltetem Gert ber diesen Mac aus dem Men Apple aus.

Der Prozessor in einem 8-Core-Mac Pro wird als 2 x 3 GHz Quad-Core Intel Xeon bezeichnet.

60 Deutsch

Auswhlen der Laufwerksmodule Optimale Ergebnisse erzielen Sie mit vier baugleichen Festplattenlaufwerken. Die Gre eines RAID-Systems ist durch die Kapazitt des kleinsten Laufwerks im System begrenzt. Der ber diese Kapazitt hinausgehende Speicherplatz auf greren Lauf- werken im RAID-System steht in einem solchen Fall nicht zur Verfgung.

Sicherheitsrichtlinien fr Arbeiten im Inneren des Mac Pro-Computers Berhren Sie das Gehuse des Mac Pro-Computers, whrend der Computer noch am Stromnetz angeschlossen ist, um elektrostatische Aufladungen abzuleiten, bevor Sie interne Komponenten berhren. Verlassen Sie den Arbeitsplatz erst wieder, wenn Sie die Arbeit mit den internen Komponenten des Mac Pro beendet und die Abdeckung des Gerts wieder geschlossen haben, um zu vermeiden, dass Sie sich erneut statisch aufladen. Um mgliche Beschdigungen durch elektrostatische Aufladungen auf ein Minimum zu begrenzen, empfiehlt es sich, ein antistatisches Armband bei der Arbeit mit den internen Komponenten des Mac Pro zu tragen.

Wichtig: Halten Sie Erweiterungskarten nur an den Rndern. Berhren Sie niemals die goldfarbenen Kontakte oder andere Metallkomponenten auf den Karten. Gehen Sie sorgfltig mit den Karten ums und verbiegen oder verkanten Sie sie nicht.

Bentigtes Werkzeug Sie bentigen die folgenden Werkzeuge und Schrauben, die fast alle mitgeliefert wer- den, um die RAID-Karte in Ihrem Mac Pro zu installieren: Winkel-Kreuzschlitzschraubendreher Schlssel fr die Befestigungsstifte Ersatzschrauben Einen mittelgroen Kreuzschlitzschraubendreher (nicht mitgeliefert)

ACHTUNG: Schalten Sie den Mac Pro immer aus und ziehen Sie das Netzkabel ab, bevor Sie das Gert ffnen, um eine Beschdigung der internen Komponenten oder der Komponenten, die installiert werden sollen, zu vermeiden. ffnen Sie den Mac Pro nicht, solange er eingeschaltet ist. Die internen Komponenten des Mac Pro kn- nen auch bei einem ausgeschalteten Computer sehr hei sein. Lassen Sie das Gert abkhlen, bevor Sie es ffnen.

Schraubendreher Schlssel Ersatzschrauben (2)

Deutsch 61

Installieren der Karte Fhren Sie die Anleitungen auf den folgenden Seiten aus, um die RAID-Karte in Ihrem Mac Pro-Computer zu installieren.

Hinweis: Die Installationsanleitungen variieren leicht, abhngig davon, ob Sie die RAID- Karte in einem Quad-Core- oder 8-Core-Mac Pro-Computer installieren. Nheres zum Erkennen des Computermodells finden Sie im Abschnitt Ermitteln der Mac Pro-Modell- version auf Seite 59.

Schritt 1: Ausschalten des Mac Pro-Computers und Unterbrechen der Stromzufuhr 1 Schalten Sie Ihren Mac Pro-Computer aus, indem Sie Apple > Ausschalten auswh-

len. Warten Sie einige Minuten, damit die internen Komponenten abkhlen.

2 Berhren Sie das Metallgehuse des Mac Pro, solange das Netzkabel noch am Strom- netz angeschlossen ist, um eventuell vorhandene elektrostatische Aufladungen an Kleidung und Krper abzuleiten.

3 Ziehen Sie alle Kabel einschlielich des Netzkabels aus den Anschlssen Ihres Computers heraus.

62 Deutsch

Schritt 2: ffnen des Gehuses 1 Sttzen Sie die Seitenabeckung mit der Hand und ziehen Sie den Riegel an der

Rckseite des Gehuses nach oben.

2 Nehmen Sie die Seitenabdeckung ab und legen Sie sie beiseite.

ACHTUNG: Die internen Komponenten des Mac Pro knnen auch bei einem aus- geschalteten Computer sehr hei sein. Lassen Sie das Gert abkhlen, bevor Sie es ffnen.

Deutsch 63

Schritt 3: Entfernen der Laufwerksmodule m Vergewissern Sie sich, dass der Riegel an der Rckseite weiterhin geffnet ist und

ziehen Sie alle vier Laufwerksmodule und die Blindmodule heraus.

Schritt 4: Entfernen der PCI-Express-Karten 1 Lsen Sie die beiden Rndelschrauben an der Halterung, mit der die PCI-Express-Kar-

ten fixiert ist, und entfernen Sie die Halterung und die Anschlussabdeckung fr Steck- platz 4 (den obersten Steckplatz).

Riegel

PCI-HalterungAnschlussabdeckung

64 Deutsch

2 Ziehen Sie die Kabel heraus, die an der Grafikkarte in Steckplatz 1 (im untersten Steck- platz) angeschlossen sind. Drcken Sie die Verriegelung am Kartensteckplatz nach oben und ziehen Sie die Karte aus dem Steckplatz heraus.

3 Wiederholen Sie diese Schritte, um weitere PCI-Express-Karten zu entfernen.

Wichtig: Notieren Sie sich, aus welchem Steckplatz welche Karte ausgebaut wurde, damit sie spter wieder im selben Steckplatz eingesetzt wird.

Schritt 5: Entfernen der CPU-Abdeckung Welche Schritte zum Entfernen der CPU-Abdeckung erforderlich sind, hngt davon ab, ob Sie mit einem Quad-Core- oder 8-Core-Mac Pro-Computer arbeiten. Nheres zum Erkennen des Computermodells finden Sie im Abschnitt Ermitteln der Mac Pro-Modell- version auf Seite 59.

Verriegelung

Grafikkarte

Deutsch 65

Anleitungen fr einen 8-Core-Mac Pro: m Heben Sie die CPU-Abdeckung hinten an und entfernen Sie sie. Fahren Sie dann mit

Schritt 6 auf Seite 68 fort.

Anleitungen fr einen Quad-Core-Mac Pro: 1 (Nur fr Quad-Core) Entfernen Sie die Speichermodule und legen Sie sie zur Seite.

Wichtig: Notieren Sie sich, aus welchem Steckplatz welche Karte ausgebaut wurde, damit sie spter wieder im selben Steckplatz eingesetzt wird.

CPU-Abdeckung

66 Deutsch

2 (Nur Quad-Core) Entfernen Sie die beiden langen Schrauben hinten im DIMM-Trger.

3 (Nur Quad-Core) Schieben Sie den Schlssel fr die Stifte zwischen DIMM-Trger und Gehuse und setzen Sie ihn am Stift an, damit sich dieser nicht mitdrehen kann. Dre- hen Sie dann die beiden Schrauben vorne aus dem DIMM-Trgerboden mithilfe des Winkel-Schraubendrehers heraus.

Am einfachsten lassen sich die Schrauben herausdrehen, wenn Sie den mitgelieferten Winkel-Schraubendreher exakt in die Schraubenkpfe einsetzen. Achten Sie darauf, dass der Schraubendreher beim Drehen nicht aus dem Schraubenkopf rutscht.

Wichtig: Klemmen Sie keine Kabel zwischen dem Schlssel und den Stiften ein.

Lange Schrauben (2) Schraubendreher

Schraubendreher

DIMM-Kfig

Schlssel

Gehuse

Kurze Schrauben (2)

Schlssel

Deutsch 67

4 (Nur Quad-Core) Nehmen Sie den DIMM-Trger nicht aus dem Gehuse, sondern schieben Sie ihn nach rechts in Richtung Rckwand des Computers, sodass ein Spalt zwischen DIMM-Trger und CPU-Abdeckung entsteht.

Wenn Sie hierbei Schwierigkeiten haben sollten, versuchen Sie, den DIMM-Trger mit einer Hand nach rechts in Richtung Rckwand zu drcken und die linke Vorderkante des Trgers mit der anderen Hand vorsichtig herauszuziehen. Der DIMM-Trger sollte sich etwas von der CPU-Abdeckung lsen, sodass ein Spalt entsteht.

5 (Nur Quad-Core) Ziehen Sie die Unterkante der CPU-Abdeckung nach vorne. Drehen Sie die Abdeckung nach rechts und nehmen Sie sie heraus.

CPU-Abdeckung

Spalt

DIMM-Kfig

CPU-Abdeckung

68 Deutsch

Schritt 6: Entfernen der Lftergruppe 1 Drehen Sie die Schrauben heraus, mit der die Lftergruppe befestigt ist.

Anleitungen fr einen 8-Core-Mac Pro Die beiden Schrauben befinden sich oben rechts an der hinteren Ecke sowie vorne rechts an der vorderen Ecke.

Anleitungen fr einen Quad-Core-Mac Pro Die Lftergruppe ist mit einer einzelnen Schraube in der rechten oberen Ecke an der Hauptplatine befestigt.

Lftergruppe

Schraube an Lftergruppe

Zweite Schraube (nicht vorhanden bei Quad-Core-Mac Pro)

Deutsch 69

2 Ziehen Sie die Lftergruppe aus dem Gehuse heraus. Wenn Sie dabei Schwierigkeiten haben sollten, versuchen Sie, die Lftergruppe beim Herausziehen vorsichtig hin und her zu bewegen. Mglicherweise lsst sich die Lftergruppe leichter ausbauen, wenn Sie den Computer auf die Seite legen und die Komponente nach oben herausziehen.

Lftergruppe

Ziehen Sie hier.

70 Deutsch

Schritt 7: Abziehen und neu Verlegen des iPass-Kabels 1 Drcken Sie auf die Steckerverriegelung, um das iPass-Kabel zu lsen, und ziehen Sie

das Kabel aus dem Anschluss an der Hauptplatine heraus.

2 Entwirren Sie falls ntig das iPass-Kabel und die anderen Kabel, die ebenfalls in diesem Bereich entlang gefhrt werden, sodass das freie Ende des iPass-Kabels mglichst dicht bei den PCI-Steckleisten liegt.

Mglicherweise ist es erforderlich, andere Kabel abzuziehen, um das iPass-Kabel so zu fhren, dass es bis an die PCI-Steckleisten reicht. Wenn sich das iPass-Kabel wie in der Abbildung gezeigt etwa 3 cm weit vom Wrmeleiter entfernt befindet, sollte ausrei- chend Spiel vorhanden sein, um das Kabel in Schritt 9 mit der RAID-Karte zu verbinden.

Achten Sie darauf, alle anderen eventuell beim Verlegen des iPass-Kabels herausgezo- genen Kabel wieder anzuschlieen.

iPass-Kabel

Stecker- verriegelung

Vor dem Verlegen

iPass-Kabel

Wrmeableiter

Nach dem Verlegen

Deutsch 71

Schritt 8: Anschlieen der RAID-Batterie m Verbinden Sie das Batteriekabel auf der RAID-Karte mit dem Anschluss neben der

Batterie auf der Karte.

Schritt 9: Anschlieen des iPass-Kabels und Installieren der RAID-Karte 1 Halten Sie die RAID-Karte im Inneren des Gehuses und verbinden Sie das iPass-Kabel

mit dem Anschluss auf der Karte. Der Stecker ist korrekt angeschlossen, wenn beim Anschlieen ein Klickton zu hren ist.

2 Setzen Sie die RAID-Karte in den oberen PCI-Express-Steckplatz (Steckplatz 4) ein. Stellen sich sicher, dass die Karte korrekt in der Steckleiste sitzt.

Wichtig: Die Mac Pro RAID-Karte muss im PCI-Express-Steckplatz 4, dem obersten Steckplatz, installiert werden.

Sollte das iPass-Kabel bei der Installation der Karte stren, ziehen Sie das Kabel ab und verlegen Sie es so, dass es mehr Spiel hat.

Batteriekabel

Anschluss der auf Karte

Anschluss auf der Karte

iPass-Kabel

72 Deutsch

Schritt 10: Installieren der Lftergruppe 1 Richten Sie die Fhrung unten an der Lftergruppe mit der Schiene im Gehuseboden

aus und schieben Sie die Lftergruppe in das Gehuse.

Vergewissern Sie sich, dass das iPass-Kabel hinter der Lftergruppe, unter der Monta- gestrebe verluft und dass die RAID-Karte in die Kartenfhrung 4 an der Lftergruppe eingesetzt wird.

2 Drehen Sie die Schrauben fest, mit denen die Lftergruppe befestigt wird.

Anleitungen fr einen 8-Core-Mac Pro Die beiden Schrauben befinden sich oben rechts an der hinteren Ecke sowie unten rechts an der vorderen Ecke.

Anleitungen fr einen Quad-Core-Mac Pro Die Lftergruppe wird mit einer einzelnen Schraube in der rechten oberen Ecke an der Hauptplatine befestigt.

Schraube

Kartenfhrung 4

Montagestrebe

Fhrung fr Lftergrupe

Zweite Schraube (nicht vorhanden am Quad-Core-Mac Pro)

Deutsch 73

Schritt 11: Installieren der CPU-Abdeckung Die weitere Vorgehensweise hngt davon ab, ob Sie mit einem Quad-Core- oder 8-Core-Mac Pro-Computer arbeiten.

Anleitungen fr einen 8-Core-Mac Pro m Setzten Sie die Vorderkante der Abdeckung ein und drcken Sie die Abdeckung in

das Gehuse, bis die Magnetverriegelung einrastet. Fahren Sie dann mit Schritt 12 auf Seite 76 fort.

Anleitungen fr einen Quad-Core-Mac Pro 1 Halten Sie den vorderen Teil der Abdeckung so, dass sich dieser vor dem DIMM-Trger

befindet. Setzen Sie die obere linke Kante der Abdeckung unter der Halterung an der Lftergruppe unmittelbar unter der PCI-Kartenhalterung in Steckplatz 1 ein und sen- ken Sie die Abdeckung, sodass sie einrastet.

CPU-Abdeckung

74 Deutsch

Vergewissern Sie sich, dass die Kante der Abdeckung nicht in die Fhrung an der PCI-Steckleiste 1 an der Lftergruppe eingreift.

2 (Nur Quad-Core) Schieben Sie den DIMM-Trger nach rechts in Richtung Rckwand und lassen Sie die CPU-Abdeckung zwischen DIMM-Trger und Lftergruppe ein- rasten. Bewegen Sie DIMM-Trger und CPU-Abdeckung beim Einsetzen der CPU- Abdeckung leicht nach links und rechts, sodass sie bndig mit den Frontseiten der Lftergruppe und des DIMM-Trgers abschliet.

CPU-Abdeckung

Untere Kunststoffhalterung

Kartenfhrung 1

CPU-Abdeckung

DIMM-Kfig

Deutsch 75

3 (Nur Quad-Core) Drehen Sie die beiden langen Schrauben an der Rckseite des DIMM- Trgers fest. berdrehen Sie die Schrauben nicht, drehen Sie sie nur leicht fest.

4 (Nur Quad-Core) Drehen Sie die beiden mitgelieferten Ersatzschrauben unten an der Vorderseite des DIMM-Trgers fest. berdrehen Sie die Schrauben nicht, drehen Sie sie nur leicht fest.

Lange Schrauben (2) Schraubendreher

Schraubendreher

Ersatzschrauben (2)

76 Deutsch

Schritt 12: Installieren der Grafikkarte und eventuell vorhandener weiterer PCI-Express-Karten

1 Installieren Sie die Grafikkarte in Steckplatz 1, dem untersten Steckplatz, der sich unmittelbar neben dem DIMM-Trger befindet. Wenn Sie zuvor ein Kabel von der Karte abgezogen haben, um die Karte herausnehmen zu knnen, schlieen Sie das Kabel jetzt wieder an.

2 Installieren Sie alle weiteren PCI-Express-Karten, die Sie herausgenommen haben.

3 Setzen Sie die Halterung wieder ein, mit der die Karte fixiert wird.

Grafikkarte

PCI-Halterung

Deutsch 77

Schritt 13: Einsetzen der Laufwerksmodule m Vergewissern Sie sich, dass der Riegel am Gehuse hochgeklappt ist und schieben Sie

die Laufwerksmodule und die Blindmodule in das Gehuse.

Schritt 14: (Nur Quad-Core) Erneutes Einsetzen der Speichermodule m Schieben Sie die Speichermodule wieder in den DIMM-Trger zurck.

Der Vorgang wird u. U. einfacher, wenn Sie den Computer auf die Seite legen.

Wichtig: Achten Sie darauf, dass Sie jedes Speichermodul in denselben Steckplatz einsetzen, aus dem Sie es entfernt haben.

Schritt 15: Schlieen der Seitenabdeckung 1 Setzen Sie die Unterkante der Seitenabdeckung in das Gehuse ein und schlieen Sie

die Abdeckung.

2 Schlieen Sie den Riegel.

Schritt 16: Anschlieen von externen Kabeln und Netzkabel Nach dem Anschlieen der Kabel knnen Sie das RAID-Dienstprogramm verwenden, um die RAID-Volumes einzurichten.

Riegel

78 Deutsch

Verwenden des RAID-Dienstprogramms zum Einrichten von RAID-Volumes Nach der Installation der Mac Pro RAID-Karte knnen Sie die RAID-Volumes mit dem RAID-Dienstprogramm konfigurieren. Sie ffnen das RAID-Dienstprogramm, indem Sie Ihren Computer mit der Installations-DVD fr Mac OS X oder Mac OS X Server Version 10.5 (oder neuer) starten. Das RAID-Dienstprogramm befindet sich im Men Dienstprogramme, das verfgbar ist, wenn Sie das Installationsprogramm gestar- tet und Ihre Sprache ausgewhlt haben.

Informationen zum Verwenden des RAID-Dienstprogramms fr die Konfiguration und Verwaltung von RAID-Volumes finden Sie im RAID-Dienstprogramm-Benutzer- handbuch, das Sie von folgender Website laden knnen: www.apple.com/de/server/ documentation.

79

Mac Pro RAID

80

Mac Pro Mac Pro Mac Pro

Mac Pro

Mac Pro

Mac Pro RAID

90

Mac Pro RAID

Mac Pro 8 Mac Pro RAID 79

Mac Pro

Mac Pro Mac Pro Mac Pro

Mac Pro

81

1 Mac Pro 1 Apple > Mac Pro

2 Mac Pro Mac Pro

3

82

2 1

2

Mac Pro

83

3 m

84

4 PCI Express 1 PCI Express 4

2 1

3 PCI Express

85

5 CPU CPU Mac Pro 8 Mac Pro

79 Mac Pro

8 Mac Pro m CPU 88 6

Mac Pro 1

86

2 DIMM

3 DIMM 90 DIMM

90

87

4 DIMM DIMM CPU

DIMM CPU

5 CPU

88

6 1

8 Mac Pro

Mac Pro

2

89

7 iPass 1 iPass

2 iPass iPass PCI

iPass PCI 1.25

iPass 9 RAID

iPass

90

8 RAID m RAID

9 iPass RAID 1 RAID iPass

2 RAID PCI Express 4

Mac Pro RAID PCI Express 4

iPass

91

10 1

iPass RAID 4

2

8 Mac Pro

Mac Pro

92

11 CPU 8 Mac Pro

8 Mac Pro m

94 12

Mac Pro 1 DIMM

PCI 1

PCI 1

93

2 DIMM DIMM CPU CPU DIMM CPU

DIMM

3 DIMM

94

4 DIMM

12 PCI Express 1 1 DIMM

2 PCI Express

95

3

13 m

96

14 m DIMM

15 1

2

16 RAID RAID

RAID RAID Mac Pro RAID RAID RAID

RAID Mac OS X Mac OS X Server v10.5

RAID

RAID RAID RAID www.apple.com.cn/server/documentation

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

Regulatory Compliance Information

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense.

Important:

Changes or modifications to this product not authorized by Apple Inc., could void the EMC compliance and negate your authority to operate the product.

Industry Canada Statement

Complies with the Canadian ICES-003 Class A specifications. Cet appareil numrique de la classe A est conforme la norme NMB-003 du Canada.

VCCI Class A Statement

European Community

Complies with European Directive 89/336/EEC.

CISPR 22 & EN55022 Statement

Taiwan Class A Statement

China Class A Statement

Korea Class A Statement

WARNING:

This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.

Mac Pro RAID Card/ A1247

Apple Inc APL -A1247 (A)

134

Disposal and Recycling Information Dispose of your Mac Pro RAID Card and its battery according to your local environmental laws and guidelines.

For information about Apples recycling program, go to www.apple.com/environment.

Handling the battery: Do not drop, disassemble, crush, incinerate, or expose the battery to temperatures above 212 F (100 C). Stop using the battery if it appears damaged in any way.

Nederlands: Gebruikte batterijen kunnen worden ingeleverd bij de chemokar of in een speciale batterijcontainer voor klein chemisch afval (kca) worden gedeponeerd.

Deutschland: Das Gert enthlt Batterien. Diese gehren nicht in den Hausmll. Sie knnen verbrauchte Batterien beim Handel oder bei den Kommunen unentgeltlich abgeben. Um Kurzschlsse zu vermeiden, kleben Sie die Pole der Batterien vorsorglich mit einem Klebestreifen ab.

Taiwan:

European UnionDisposal Information

The symbol above means that according to local laws and regulations your product should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Some collection points accept products for free. The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

Union Europenneinformations sur llimination

Le symbole ci-dessus signifie que vous devez vous dbarasser de votre produit sans le mlanger avec les ordures mnagres, selon les normes et la lgislation de votre pays. Lorsque ce produit nest plus utilisable, portez-le dans un centre de traitement des dchets agr par les autorits locales. Certains centres acceptent les produits gratuitement. Le traitement et le recyclage spar de votre produit lors de son limination aideront prserver les ressources naturelles et protger lenvironnement et la sant des tres humains.

Europische UnionInformationen zur Entsorgung Das Symbol oben bedeutet, dass dieses Produkt entsprechend den geltenden gesetzlichen Vorschriften und getrennt vom Hausmll entsorgt werden muss. Geben Sie dieses Produkt zur Entsorgung bei einer offiziellen Sammelstelle ab. Bei einigen Sammelstellen knnen Produkte zur Entsorgung unentgeltlich abgegeben werden. Durch das separate Sammeln und Recycling werden die natrlichen Ressourcen geschont und es ist sichergestellt, dass beim Recycling des Produkts alle Bestimmungen zum Schutz von Gesundheit und Umwelt beachtet werden.

Unione Europeainformazioni per leliminazione Questo simbolo significa che, in base alle leggi e alle norme locali, il prodotto dovrebbe essere eliminato separatamente dai rifiuti casalinghi. Quando il prodotto diventa inutilizzabile, portarlo nel punto di raccolta stabilito dalle autorit locali. Alcuni punti di raccolta accettano i prodotti gratuitamente. La raccolta separata e il riciclaggio del prodotto al momento delleliminazione aiutano a conservare le risorse naturali e assicurano che venga riciclato in maniera tale da salvaguardare la salute umana e lambiente.

Europeiska unionenuttjnta produkter Symbolen ovan betyder att produkten enligt lokala lagar och bestmmelser inte fr kastas tillsammans med hushllsavfallet. Nr produkten har tjnat ut mste den tas till en tervinningsstation som utsetts av lokala myndigheter. Vissa tervinningsstationer tar kostnadsfritt hand om uttjnta produkter. Genom att lta den uttjnta produkten tas om hand fr tervinning hjlper du till att spara naturresurser och skydda hlsa och milj.

135

2007 Apple Inc. All rights reserved. Apple, the Apple logo, Mac, and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. Intel, Intel Core, and Xeon are trademarks of Intel Corp. in the

Manualsnet FAQs

If you want to find out how the Mac Pro RAID Card Apple works, you can view and download the Apple Mac Pro RAID Card Installation Guide on the Manualsnet website.

Yes, we have the Installation Guide for Apple Mac Pro RAID Card as well as other Apple manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Guide should include all the details that are needed to use a Apple Mac Pro RAID Card. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Apple Mac Pro RAID Card Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Apple Mac Pro RAID Card Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Apple Mac Pro RAID Card Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Apple Mac Pro RAID Card Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Apple Mac Pro RAID Card Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.