Amcrest AMPS5E4P-AT-65 POE Switch User Manual PDF

1 of 9
1 of 9

Summary of Content for Amcrest AMPS5E4P-AT-65 POE Switch User Manual PDF

4/8-Port PoE Switch Users Manual Version 1.0.3

Simple. Reliable. Secure.

AMPS9E8P-AT-96

AMPS5E4P-AT-65

Important Safeguards & Warnings Attention: Please read the following safeguards and warnings carefully before using the product in order to avoid damages and losses.

Note: Do not expose the device to Soot, high humidity or dust. Doing so may cause fire or electric shock. Do not install the device in direct sunlight as it may cause overheating and failure. Installation of the unit should be via the compatible rack mount or securely on a flat surface. Do not place the device on carpet or other insulating surfaces. Ex. Rugs, towels, rags, clothing, etc. Do not block or impede airflow to or around the unit. Doing so may cause overheating, failure or fire. Do not place stack or place objects on the unit. This unit contains no user serviceable parts. Servicing should only be performed by approved technicians.

Warning: Do not use a power supply other than the provided manufacturer power supply. Failure to do so may cause unit failure and/or damage. Special Announcement: This manual is for reference only. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks are the properties of Amcrest Technologies LLC.

Applicable Models: The manual can be applied to the following models: MODEL NUMBERS PENDING: : AMPS5E4P-AT-65, AMPS9E8P-AT-96

Table of Contents 1 Product Overview 3 1.1 Features 3 1.2 Typical Application 3

2 Device Structure 4 2.1 4-Port PoE Switch 4 2.1.1 Front Panel 4 2.1.2 Back Panel 4 2.1.3 PoE Power Output 5

2.2 8-Port PoE Switch 5 2.2.1 Front Panel 5 2.2.2 Back Panel 6 2.2.3 PoE Power Output 6

3 Appendix 1 Technical Specification 7

Product Overview

1.1 Features Common Features: Two-layer commercial PoE switch. Conform to IEEE802.3, IEEE802.3i, IEEE802.3u and IEEE802.3X standards. MAC auto study and aging, MAC address list capacity is 2K. All ports self-adapt MDI/MDIX mode. All the10/100M self-adaptive RJ45 PoE ports support IEEE802.3af and IEEE802.3at standards. Commercial wide temperature design. Supports DC 52V 1.25A power supply.

Individual Features: 4-port PoE switch supports 1 10/100M self-adaptive RJ45 UpLink port and 4 10/100M self-adaptive PoE RJ45 ports. 4-port PoE switch with max 65W total power consumption. 8-port PoE switch supports 1 10/100M self-adaptive RJ45 UpLink port and 8 10/100M self-adaptive PoE RJ45 ports. 8-port PoE switch with max 96W total power consumption.

1.2 Typical Application The typical application of the device is shown in Figure 1- 1

PoE

RJ45 Cable

NVR

PC

Switch

Camera

Camera

Camera

Figure 1.1

Amcrest 4/8 Port PoE Switch

Wi-Fi AP

3

2.1.3 PoE Power Output 10/100M RJ45 PoE Ports support IEEE802.3af and IEEE802.3at power standards. Supports simultaneous power to 2 ports using IEEE802.3t and 4 ports using IEEE802.3af. Total power draw cannot be over 65W.

2.2 8-Port PoE Switch 2.2.1 Front Panel

The front panel is shown in Figure 2-3.

2.2.2 Back Panel The back panel is shown in Figure 2-4.

2.2.3 PoE Power Output 10/100M RJ45 PoE Ports support IEEE802.3af and IEEE802.3at power standards. Supports simultaneous power to 3 ports using IEEE802.3t and 8 ports using IEEE802.3af. Total power draw cannot be over 96W.

Appendix 1 Technical Specification

Device Structure 2.1 4-Port PoE Switch 2.1.1 Front Panel

The front panel is shown in Figure 2-1.

2.1.2 Back Panel The back panel is shown in Figure 2-2.

Product Overview

1.1 Features Common Features: Two-layer commercial PoE switch. Conform to IEEE802.3, IEEE802.3i, IEEE802.3u and IEEE802.3X standards. MAC auto study and aging, MAC address list capacity is 2K. All ports self-adapt MDI/MDIX mode. All the10/100M self-adaptive RJ45 PoE ports support IEEE802.3af and IEEE802.3at standards. Commercial wide temperature design. Supports DC 52V 1.25A power supply.

Individual Features: 4-port PoE switch supports 1 10/100M self-adaptive RJ45 UpLink port and 4 10/100M self-adaptive PoE RJ45 ports. 4-port PoE switch with max 65W total power consumption. 8-port PoE switch supports 1 10/100M self-adaptive RJ45 UpLink port and 8 10/100M self-adaptive PoE RJ45 ports. 8-port PoE switch with max 96W total power consumption.

1.2 Typical Application The typical application of the device is shown in Figure 1- 1

4

SN Name Note

1 Ethernet Ports 4 10/100M self-adaptive RJ45 PoE ports. 1 UpLink Port.

Sheet 2-1

1

Figure 2.1

2.1.3 PoE Power Output 10/100M RJ45 PoE Ports support IEEE802.3af and IEEE802.3at power standards. Supports simultaneous power to 2 ports using IEEE802.3t and 4 ports using IEEE802.3af. Total power draw cannot be over 65W.

2.2 8-Port PoE Switch 2.2.1 Front Panel

The front panel is shown in Figure 2-3.

2.2.2 Back Panel The back panel is shown in Figure 2-4.

2.2.3 PoE Power Output 10/100M RJ45 PoE Ports support IEEE802.3af and IEEE802.3at power standards. Supports simultaneous power to 3 ports using IEEE802.3t and 8 ports using IEEE802.3af. Total power draw cannot be over 96W.

Appendix 1 Technical Specification

Device Structure 2.1 4-Port PoE Switch 2.1.1 Front Panel

The front panel is shown in Figure 2-1.

2.1.2 Back Panel The back panel is shown in Figure 2-2.

1

2

3

Figure 2.2

Product Overview

1.1 Features Common Features: Two-layer commercial PoE switch. Conform to IEEE802.3, IEEE802.3i, IEEE802.3u and IEEE802.3X standards. MAC auto study and aging, MAC address list capacity is 2K. All ports self-adapt MDI/MDIX mode. All the10/100M self-adaptive RJ45 PoE ports support IEEE802.3af and IEEE802.3at standards. Commercial wide temperature design. Supports DC 52V 1.25A power supply.

Individual Features: 4-port PoE switch supports 1 10/100M self-adaptive RJ45 UpLink port and 4 10/100M self-adaptive PoE RJ45 ports. 4-port PoE switch with max 65W total power consumption. 8-port PoE switch supports 1 10/100M self-adaptive RJ45 UpLink port and 8 10/100M self-adaptive PoE RJ45 ports. 8-port PoE switch with max 96W total power consumption.

1.2 Typical Application The typical application of the device is shown in Figure 1- 1

5

1 2 3

Figure 2.3

2.1.3 PoE Power Output 10/100M RJ45 PoE Ports support IEEE802.3af and IEEE802.3at power standards. Supports simultaneous power to 2 ports using IEEE802.3t and 4 ports using IEEE802.3af. Total power draw cannot be over 65W.

2.2 8-Port PoE Switch 2.2.1 Front Panel

The front panel is shown in Figure 2-3.

2.2.2 Back Panel The back panel is shown in Figure 2-4.

2.2.3 PoE Power Output 10/100M RJ45 PoE Ports support IEEE802.3af and IEEE802.3at power standards. Supports simultaneous power to 3 ports using IEEE802.3t and 8 ports using IEEE802.3af. Total power draw cannot be over 96W.

Appendix 1 Technical Specification

SN Name Note

1 Power/PoE Max Indicates the switch is powered on and if the maximum PoE power available is used.

2 Ground Used as grounding option for the switch.

3 DC Power connection port. Supports 52V 1.25A

Sheet 2-2

SN Name Note

1 1, 2, 3, 4, 5, 6, 7, 8 8 10/100M self-adaptive RJ45 PoE ports.

2 9(Uplink) 10/100M self-adaptive RJ45 port.

3 Power Power connection port. Supports 52V 1.85A.

Sheet 2-3

Device Structure 2.1 4-Port PoE Switch 2.1.1 Front Panel

The front panel is shown in Figure 2-1.

2.1.2 Back Panel The back panel is shown in Figure 2-2.

Product Overview

1.1 Features Common Features: Two-layer commercial PoE switch. Conform to IEEE802.3, IEEE802.3i, IEEE802.3u and IEEE802.3X standards. MAC auto study and aging, MAC address list capacity is 2K. All ports self-adapt MDI/MDIX mode. All the10/100M self-adaptive RJ45 PoE ports support IEEE802.3af and IEEE802.3at standards. Commercial wide temperature design. Supports DC 52V 1.25A power supply.

Individual Features: 4-port PoE switch supports 1 10/100M self-adaptive RJ45 UpLink port and 4 10/100M self-adaptive PoE RJ45 ports. 4-port PoE switch with max 65W total power consumption. 8-port PoE switch supports 1 10/100M self-adaptive RJ45 UpLink port and 8 10/100M self-adaptive PoE RJ45 ports. 8-port PoE switch with max 96W total power consumption.

1.2 Typical Application The typical application of the device is shown in Figure 1- 1

6

2.1.3 PoE Power Output 10/100M RJ45 PoE Ports support IEEE802.3af and IEEE802.3at power standards. Supports simultaneous power to 2 ports using IEEE802.3t and 4 ports using IEEE802.3af. Total power draw cannot be over 65W.

2.2 8-Port PoE Switch 2.2.1 Front Panel

The front panel is shown in Figure 2-3.

2.2.2 Back Panel The back panel is shown in Figure 2-4.

2.2.3 PoE Power Output 10/100M RJ45 PoE Ports support IEEE802.3af and IEEE802.3at power standards. Supports simultaneous power to 3 ports using IEEE802.3t and 8 ports using IEEE802.3af. Total power draw cannot be over 96W.

Appendix 1 Technical Specification

SN Name Note

1 PWR Indicates the switch is powered on.

2 9(Uplink) Port Status LED. Blinking data transmitting. Solid link established. Off no connection.

3 1, 2, 3, 4, 5, 6, 7, 8 Port Status LEDs. Blinking data transmitting. Solid link established. Off no connection.

4 PoE Status This row of LEDs indicates if PoE is being used.

5 PoE MAX Indicates if the maximum PoE power available is used.

6 VLAN When enabled, communication is isolated between downlinks and uplink. Downlinks do not communicate with each other.

Sheet 2-4

1 2 3 4 65

Figure 2.4

Device Structure 2.1 4-Port PoE Switch 2.1.1 Front Panel

The front panel is shown in Figure 2-1.

2.1.2 Back Panel The back panel is shown in Figure 2-2.

Product Overview

1.1 Features Common Features: Two-layer commercial PoE switch. Conform to IEEE802.3, IEEE802.3i, IEEE802.3u and IEEE802.3X standards. MAC auto study and aging, MAC address list capacity is 2K. All ports self-adapt MDI/MDIX mode. All the10/100M self-adaptive RJ45 PoE ports support IEEE802.3af and IEEE802.3at standards. Commercial wide temperature design. Supports DC 52V 1.25A power supply.

Individual Features: 4-port PoE switch supports 1 10/100M self-adaptive RJ45 UpLink port and 4 10/100M self-adaptive PoE RJ45 ports. 4-port PoE switch with max 65W total power consumption. 8-port PoE switch supports 1 10/100M self-adaptive RJ45 UpLink port and 8 10/100M self-adaptive PoE RJ45 ports. 8-port PoE switch with max 96W total power consumption.

1.2 Typical Application The typical application of the device is shown in Figure 1- 1

7

TECHNICAL PARAMETERS AMPS5E4P-AT-65 AMPS9E8P-AT-96

Physical Port

Network Ports 1*10/100 Base-T (UpLink) 1*10/100 Base-T (UpLink)

4*10/100 Base-T (POE powered) 8*10/100 Base-T (POE powered)

Technical Index

Exchange Capacity 1.0Gbps 1.8Gbps

Packet Forwarding Rate 0.74Mpps 1.34Mpps

Exchange Mode Store & forward

MAC Study MAC auto study, address list capacity 2K

Power Pin Assignment Endspan 12(+) 36(-)

Common Parameters

Indicator Power, PoE Max, PoE, Link/Act

Power DC52V 1.25A power adapter AC 100-240V Input, 50/60Hz

Power Consumption 65W 96W

Application Humidity 10%90%

High &Low Temperature -10C45C

Weight 730g 1.1kg

Dimension 94mm(L) * 71mm(W) *26mm(H) 171mm(L) * 98mm(W) *27mm(H)

2.1.3 PoE Power Output 10/100M RJ45 PoE Ports support IEEE802.3af and IEEE802.3at power standards. Supports simultaneous power to 2 ports using IEEE802.3t and 4 ports using IEEE802.3af. Total power draw cannot be over 65W.

2.2 8-Port PoE Switch 2.2.1 Front Panel

The front panel is shown in Figure 2-3.

2.2.2 Back Panel The back panel is shown in Figure 2-4.

2.2.3 PoE Power Output 10/100M RJ45 PoE Ports support IEEE802.3af and IEEE802.3at power standards. Supports simultaneous power to 3 ports using IEEE802.3t and 8 ports using IEEE802.3af. Total power draw cannot be over 96W.

Appendix 1 Technical Specification

Device Structure 2.1 4-Port PoE Switch 2.1.1 Front Panel

The front panel is shown in Figure 2-1.

2.1.2 Back Panel The back panel is shown in Figure 2-2.

2019 Amcrest Technologies . All rights reserved.

Manualsnet FAQs

If you want to find out how the AMPS5E4P-AT-65 Amcrest works, you can view and download the Amcrest AMPS5E4P-AT-65 POE Switch User Manual on the Manualsnet website.

Yes, we have the User Manual for Amcrest AMPS5E4P-AT-65 as well as other Amcrest manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Amcrest AMPS5E4P-AT-65. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Amcrest AMPS5E4P-AT-65 POE Switch User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Amcrest AMPS5E4P-AT-65 POE Switch User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Amcrest AMPS5E4P-AT-65 POE Switch User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Amcrest AMPS5E4P-AT-65 POE Switch User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Amcrest AMPS5E4P-AT-65 POE Switch User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.