Amcrest AMPS5E4P-AT-58 POE Switch User Manual PDF

1 of 9
1 of 9

Summary of Content for Amcrest AMPS5E4P-AT-58 POE Switch User Manual PDF

4/8-Port PoE Switch Users Manual V. 1.0.0

Simple. Reliable. Secure.

Important Safeguards & Warnings Attention: Please read the following safeguards and warnings carefully before using the product in order to avoid damages and losses.

Note: Do not expose the device to Soot, high humidity or dust. Doing so may cause fire or electric shock. Do not install the device in direct sunlight as it may cause overheating and failure. Installation of the unit should be via the compatible rack mount or securely on a flat surface. Do not place the device on carpet or other insulating surfaces. Ex. Rugs, towels, rags, clothing, etc. Do not block or impede airflow to or around the unit. Doing so may cause overheating, failure or fire. Do not place stack or place objects on the unit. This unit contains no user serviceable parts. Servicing should only be performed by approved technicians.

Warning: Do not use a power supply other than the provided manufacturer power supply. Failure to do so may cause unit failure and/or damage. Special Announcement: This manual is for reference only. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks are the properties of Amcrest Technologies LLC.

Applicable Models: The manual can be applied to the following models: MODEL NUMBERS PENDING: AMPS5E4P-AT-58, AMPS9E8P-AT-96

Table of Contents 1 Product Overview 3 1.1 Features 3 1.2 Typical Application 3

2 Device Structure 4 2.1 4-Port PoE Switch 4 2.1.1 Front Panel 4 2.1.2 Upper Cover 4 2.1.3 PoE Power Supply 4

2.2 8-Port PoE Switch 5 2.2.1 Front Panel 5 2.2.2 Upper Cover 5 2.2.3 PoE Power Supply 5

3 Installation Guide 6

4 Appendix 1 Technical Specification 7

Product Overview

1.1 Features Common Features: Two-layer industrial POE switch. Conform to IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards. MAC auto study and aging, MAC address list capacity is 8K. All ports self-adapt MDI/MDIX mode. All the10/100M self-adaptive RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply. Industrial wide temperature design.

Support DC 53V power supply.

Individual Features: 4-port PoE switch 1 100/1000M self-adaptive SFP fiber port, 1*10/100/1000M self-adaptive RJ45 port and 4 10/100M self-adap- tive RJ 45 ports. 4-port PoE switch with 60W power adapter. 8-port PoE switch supports 1 1000M SFP fiber port, 1*10/100/1000M self-adaptive RJ45 port and 8 10/100M self-adaptive RJ 45 ports. 8-port PoE switch with 96W power adapter.

1.2 Typical Application The typical application of the device is shown in Figure 1- 1

3

POE Ethernet

NVRSwitchAmcrest 4/8 Port Switch

Amcrest 4/8 Port Switch

Amcrest 4/8 Port Switch

Camera

Camera

Camera

POE

Optical

POE

Figure 1.1

Device Structure 2.1 4-Port PoE Switch 2.1.1 Front Panel

The front panel is shown in Figure 2-1.

2.1.2 Upper Cover The unit power port is shown in Figure 2-2, support DC 48-57V power supply.

2.1.3 PoE Power Output 10/100M RJ45 Ports support both IEEE802.3af, and IEEE802.3at power standards. Supports simultaneous power to 4 ports using IEEE802.3af Supports Simultaneous power to 2 ports using IEEE802.3at

2.2 8-Port PoE Switch 2.2.1 Front Panel

The front panel is shown in Figure 2-1.

2.2.2 Upper Cover The device power port is shown in Figure 2-4, support DC 48-57V power supply.

2.2.3 PoE Power Supply Elaboration needed: 8 10/100M RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply. Elaboration needed: Support several RJ45 Ports IEEE802.3af and IEEE802.3at standard power supply simultaneously, total power consumption of PoE power supply is less than 93W.

Installation Guide The 4 and 8 port PoE switch support DIN rail mounting. Insert the top of the DIN rail in the hooked section of the upper mount.

Now firmly press the PoE switch straight back onto the rail until it is secured firmly. see Figure 3-1.

Appendix 1 Technical Specification

Product Overview

1.1 Features Common Features: Two-layer industrial POE switch. Conform to IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards. MAC auto study and aging, MAC address list capacity is 8K. All ports self-adapt MDI/MDIX mode. All the10/100M self-adaptive RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply. Industrial wide temperature design.

Support DC 53V power supply.

Individual Features: 4-port PoE switch 1 100/1000M self-adaptive SFP fiber port, 1*10/100/1000M self-adaptive RJ45 port and 4 10/100M self-adap- tive RJ 45 ports. 4-port PoE switch with 60W power adapter. 8-port PoE switch supports 1 1000M SFP fiber port, 1*10/100/1000M self-adaptive RJ45 port and 8 10/100M self-adaptive RJ 45 ports. 8-port PoE switch with 96W power adapter.

1.2 Typical Application The typical application of the device is shown in Figure 1- 1

4Device Structure 2.1 4-Port PoE Switch 2.1.1 Front Panel

The front panel is shown in Figure 2-1.

2.1.2 Upper Cover The unit power port is shown in Figure 2-2, support DC 48-57V power supply.

2.1.3 PoE Power Output 10/100M RJ45 Ports support both IEEE802.3af, and IEEE802.3at power standards. Supports simultaneous power to 4 ports using IEEE802.3af Supports Simultaneous power to 2 ports using IEEE802.3at

SN Name Note

1 10/100 Base-T 4 10/100M self-adaptive PoE power supply ports.

2 10/100/1000 Base-T 10/100/1000M self-adaptive RJ45 port.

3 100/1000 Base-X 100/1000M self-adaptive SFP fiber port.

4 Link/Act Fiber port status indicator

5 PWR Power indicator

Sheet 2-1

D C

48-57V

Figure 2.2

1 2 3 4 5 6

P W

R

Link/A ct

1000 B ase-X

10/100/1000 B ase-T

10/100 B ase-T + P

O E

1 2 3 4 5

Figure 2.1

2.2 8-Port PoE Switch 2.2.1 Front Panel

The front panel is shown in Figure 2-1.

2.2.2 Upper Cover The device power port is shown in Figure 2-4, support DC 48-57V power supply.

2.2.3 PoE Power Supply Elaboration needed: 8 10/100M RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply. Elaboration needed: Support several RJ45 Ports IEEE802.3af and IEEE802.3at standard power supply simultaneously, total power consumption of PoE power supply is less than 93W.

Installation Guide The 4 and 8 port PoE switch support DIN rail mounting. Insert the top of the DIN rail in the hooked section of the upper mount.

Now firmly press the PoE switch straight back onto the rail until it is secured firmly. see Figure 3-1.

Appendix 1 Technical Specification

Product Overview

1.1 Features Common Features: Two-layer industrial POE switch. Conform to IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards. MAC auto study and aging, MAC address list capacity is 8K. All ports self-adapt MDI/MDIX mode. All the10/100M self-adaptive RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply. Industrial wide temperature design.

Support DC 53V power supply.

Individual Features: 4-port PoE switch 1 100/1000M self-adaptive SFP fiber port, 1*10/100/1000M self-adaptive RJ45 port and 4 10/100M self-adap- tive RJ 45 ports. 4-port PoE switch with 60W power adapter. 8-port PoE switch supports 1 1000M SFP fiber port, 1*10/100/1000M self-adaptive RJ45 port and 8 10/100M self-adaptive RJ 45 ports. 8-port PoE switch with 96W power adapter.

1.2 Typical Application The typical application of the device is shown in Figure 1- 1

5Device Structure 2.1 4-Port PoE Switch 2.1.1 Front Panel

The front panel is shown in Figure 2-1.

2.1.2 Upper Cover The unit power port is shown in Figure 2-2, support DC 48-57V power supply.

2.1.3 PoE Power Output 10/100M RJ45 Ports support both IEEE802.3af, and IEEE802.3at power standards. Supports simultaneous power to 4 ports using IEEE802.3af Supports Simultaneous power to 2 ports using IEEE802.3at

SN Name Note

1 10/100 Base-T 8 10/100M self-adaptive RJ45 ports, which are used for PoE power supply.

2 10/100/1000 Base-T 10/100/1000M self-adaptive RJ45 port.

3 100/1000 Base-X 100/1000M self-adaptive SFP fiber port.

4 Link/Act Fiber port status indicator

5 PWR Power indicator

Sheet 2-2

D C

48-57V

Figure 2.4

5 6 7 8

1 2 3 4

9 10

P W

R

Link/A ct

1000 B ase-X

10/100/1000 B ase-T

10/100 B ase-T + P

O E

1 2 3 4 5

Figure 2.3

2.2 8-Port PoE Switch 2.2.1 Front Panel

The front panel is shown in Figure 2-1.

2.2.2 Upper Cover The device power port is shown in Figure 2-4, support DC 48-57V power supply.

2.2.3 PoE Power Supply Elaboration needed: 8 10/100M RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply. Elaboration needed: Support several RJ45 Ports IEEE802.3af and IEEE802.3at standard power supply simultaneously, total power consumption of PoE power supply is less than 93W.

Installation Guide The 4 and 8 port PoE switch support DIN rail mounting. Insert the top of the DIN rail in the hooked section of the upper mount.

Now firmly press the PoE switch straight back onto the rail until it is secured firmly. see Figure 3-1.

Appendix 1 Technical Specification

Product Overview

1.1 Features Common Features: Two-layer industrial POE switch. Conform to IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards. MAC auto study and aging, MAC address list capacity is 8K. All ports self-adapt MDI/MDIX mode. All the10/100M self-adaptive RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply. Industrial wide temperature design.

Support DC 53V power supply.

Individual Features: 4-port PoE switch 1 100/1000M self-adaptive SFP fiber port, 1*10/100/1000M self-adaptive RJ45 port and 4 10/100M self-adap- tive RJ 45 ports. 4-port PoE switch with 60W power adapter. 8-port PoE switch supports 1 1000M SFP fiber port, 1*10/100/1000M self-adaptive RJ45 port and 8 10/100M self-adaptive RJ 45 ports. 8-port PoE switch with 96W power adapter.

1.2 Typical Application The typical application of the device is shown in Figure 1- 1

6Device Structure 2.1 4-Port PoE Switch 2.1.1 Front Panel

The front panel is shown in Figure 2-1.

2.1.2 Upper Cover The unit power port is shown in Figure 2-2, support DC 48-57V power supply.

2.1.3 PoE Power Output 10/100M RJ45 Ports support both IEEE802.3af, and IEEE802.3at power standards. Supports simultaneous power to 4 ports using IEEE802.3af Supports Simultaneous power to 2 ports using IEEE802.3at

Note:

4-port PoE switch supports the slide width of 28mm. 8-port PoE switch supports the slide width of 38mm. A

Hook

Side

Buckle

Figure 3.1

AMPS5E4P-AT-58 AMPS9E8P-AT-96

2.2 8-Port PoE Switch 2.2.1 Front Panel

The front panel is shown in Figure 2-1.

2.2.2 Upper Cover The device power port is shown in Figure 2-4, support DC 48-57V power supply.

2.2.3 PoE Power Supply Elaboration needed: 8 10/100M RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply. Elaboration needed: Support several RJ45 Ports IEEE802.3af and IEEE802.3at standard power supply simultaneously, total power consumption of PoE power supply is less than 93W.

Installation Guide The 4 and 8 port PoE switch support DIN rail mounting. Insert the top of the DIN rail in the hooked section of the upper mount.

Now firmly press the PoE switch straight back onto the rail until it is secured firmly. see Figure 3-1.

Appendix 1 Technical Specification

Product Overview

1.1 Features Common Features: Two-layer industrial POE switch. Conform to IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards. MAC auto study and aging, MAC address list capacity is 8K. All ports self-adapt MDI/MDIX mode. All the10/100M self-adaptive RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply. Industrial wide temperature design.

Support DC 53V power supply.

Individual Features: 4-port PoE switch 1 100/1000M self-adaptive SFP fiber port, 1*10/100/1000M self-adaptive RJ45 port and 4 10/100M self-adap- tive RJ 45 ports. 4-port PoE switch with 60W power adapter. 8-port PoE switch supports 1 1000M SFP fiber port, 1*10/100/1000M self-adaptive RJ45 port and 8 10/100M self-adaptive RJ 45 ports. 8-port PoE switch with 96W power adapter.

1.2 Typical Application The typical application of the device is shown in Figure 1- 1

7Device Structure 2.1 4-Port PoE Switch 2.1.1 Front Panel

The front panel is shown in Figure 2-1.

2.1.2 Upper Cover The unit power port is shown in Figure 2-2, support DC 48-57V power supply.

2.1.3 PoE Power Output 10/100M RJ45 Ports support both IEEE802.3af, and IEEE802.3at power standards. Supports simultaneous power to 4 ports using IEEE802.3af Supports Simultaneous power to 2 ports using IEEE802.3at

TECHNICAL PARAMETERS AMPS5E4P-AT-58 AMPS9E8P-AT-96

Physical Port

1*100/1000 Base-X 1*1000 Base-X

Network Ports 1*10/100/1000 Base-T 1*10/100/1000 Base-T

4*10/100 Base-TPOE power supply 8*10/100 Base-TPOE power supply

Technical Index

Exchange Capacity 6.80Gbps 7.60Gbps

Packet Forwarding Rate 3.57Mpps 4.17Mpps

Exchange Mode Store & forward Store & forward

MAC Study MAC auto study, address list capacity 8 KMAC auto study, address list capacity 8K

Common Parameters

Lightning Protection Level Lightning protection level 4 Lightning protection level 4

Indicator Power indic vator, fiber port status indicator Power indicator, fiber port status indicator

Power DC53V power adapter DC53V power adapter

Power Consumption 60W 96W

Application Humidity 10%90% 10%90%

High &Low Temperature -30C65C -30C65C

Weight 480g 540g

Dimension 150mm100mm30mm 150mm100mm42mm

2.2 8-Port PoE Switch 2.2.1 Front Panel

The front panel is shown in Figure 2-1.

2.2.2 Upper Cover The device power port is shown in Figure 2-4, support DC 48-57V power supply.

2.2.3 PoE Power Supply Elaboration needed: 8 10/100M RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply. Elaboration needed: Support several RJ45 Ports IEEE802.3af and IEEE802.3at standard power supply simultaneously, total power consumption of PoE power supply is less than 93W.

Installation Guide The 4 and 8 port PoE switch support DIN rail mounting. Insert the top of the DIN rail in the hooked section of the upper mount.

Now firmly press the PoE switch straight back onto the rail until it is secured firmly. see Figure 3-1.

Appendix 1 Technical Specification

2017 Amcrest Technologies . All rights reserved. 16727 Park Row Houston, TX

Manualsnet FAQs

If you want to find out how the AMPS5E4P-AT-58 Amcrest works, you can view and download the Amcrest AMPS5E4P-AT-58 POE Switch User Manual on the Manualsnet website.

Yes, we have the User Manual for Amcrest AMPS5E4P-AT-58 as well as other Amcrest manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Amcrest AMPS5E4P-AT-58. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Amcrest AMPS5E4P-AT-58 POE Switch User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Amcrest AMPS5E4P-AT-58 POE Switch User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Amcrest AMPS5E4P-AT-58 POE Switch User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Amcrest AMPS5E4P-AT-58 POE Switch User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Amcrest AMPS5E4P-AT-58 POE Switch User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.