Amcrest ATC-1201W Camera User Manual PDF

1 of 14
1 of 14

Summary of Content for Amcrest ATC-1201W Camera User Manual PDF

Digital Game & Trail Hunting Camera

User Manual

ATC-1202W

Version 1.0.0

Revised June 9th, 2016

2

Contents 1. Instructions .................................................................................................................................................. 3

1.1 General Description .............................................................................................................................. 3

1.2 Camera Body Interface ......................................................................................................................... 3

1.3 Camera components and features ........................................................................................................ 3

1.4 Remote Control ..................................................................................................................................... 3

1.4.1 Navigating ..................................................................................................................................... 4

1.5 Shooting Information Display ............................................................................................................... 4

1.6 Supported Format ................................................................................................................................. 4

2. Cautions ....................................................................................................................................................... 5

3. Easy Operation ............................................................................................................................................. 5

3.1 Power Supply ........................................................................................................................................ 5

3.2 Insert the SD-card ................................................................................................................................. 6

3.3 Power on and Enter the ON Mode ........................................................................................................ 6

3.4 Enter TEST Mode ................................................................................................................................... 6

3.4.1 Custom Settings............................................................................................................................. 6

3.4.3 View Images or Videos .................................................................................................................. 6

3.5 Power Off .............................................................................................................................................. 7

4. Advanced Operations .................................................................................................................................. 7

4.1 Settings Menu ....................................................................................................................................... 7

4.1.1 Photo Settings ............................................................................................................................... 8

4.1.2 Video Setting ................................................................................................................................. 8

4.1.3 System Setting ............................................................................................................................... 9

4.1.4 Default ........................................................................................................................................... 9

4.1.5 General Settings .......................................................................................................................... 10

4.1.6 Camera Mode .............................................................................................................................. 10

4.1.7 Format SD-Card ........................................................................................................................... 10

4.1.8 Photo Size .................................................................................................................................... 10

4.1.10 Date and Time ........................................................................................................................... 11

4.1.11 Multi .......................................................................................................................................... 11

4.1.12 ISO ............................................................................................................................................. 11

4.1.13 Video Length ............................................................................................................................. 11

4.1.14 Video Sound .............................................................................................................................. 11

4.1.15 Delay .......................................................................................................................................... 12

4.1.16 Timer ......................................................................................................................................... 12

4.1.17 Enter Password .......................................................................................................................... 12

4.2 Playback .............................................................................................................................................. 12

4.2.1 Viewing Photo or Video ............................................................................................................... 12

4.3 Laser Pointer ....................................................................................................................................... 13

4.4 File Numbering .................................................................................................................................... 13

4.5 Firmware Upgrade .............................................................................................................................. 13

3

1. Instructions 1.1 General Description

The Amcrest AT-1202 is a big game hunting camera which can be triggered by any

movement in a specified region monitored by highly sensitive Passive Infrared (PIR)

motion sensors. It can also automatically capture high quality pictures (up to 12

Megapixels) and record 1080p HD video clips (WVGA or QVGA).

At sunrise, the unit begins to take color photos and video until there is insufficient

light. At dusk, the camera will take infrared (monochrome) photos and video.

Easy to use with a 2.0 inch colorful LCD display, and weatherproof for outdoor usage,

the Amcrest AT-1201 is the best hunting camera for all your needs.

1.2 Camera Body Interface

The camera has the following input/output (I/O) interfaces: USB connector, SD-card

slot, TV output, and external DC power connector.

Take a few moments to familiarize yourself with the cameras controls and display.

It is helpful to bookmark this section and refer to it as you read through the rest of the

manual.

1.3 Camera components and features

1) Bottom Cover

2) SD-Card Slot

3) USB Connector

4) TV Out connector

5) PIR (Passive Infrared)

6) Infrared Flash

7) Lens

8) 2-inch color LCD

Display

9) Sound recorder

10) Lock

11) Power switch

12) Battery

compartment

13) Portable remote

control

1.4 Remote Control

The remote control is primarily used for custom settings and password input. This is an

infrared wireless remote control. The maximum distance the remote can be used at is 9

meters (30 feet). There are fifteen buttons on the remote control (Note: Remote control

is located inside of the camera).

4

1.4.1 Navigating

Press UP or DOWN to select or highlight a menu item, press LEFT or RIGHT to select the

menu item options, and press OK to make a selection.

1.4.2 Characters

Press the * button on the remote to activate the built-in laser pointer.

1.5 Shooting Information Display

When the camera is turned on (the power switch is in the TEST position), the shooting

information will be displayed on the LCD.

1.6 Supported Format

Item Format

Photo JPG

Video AVI

SD Card Format FAT32

Note: If you are having problems reading the SD-card, try utilizing the SD-card on

other devices to see if the same problem occurs. If the SD-card still fails to work, please

format the card using a computer and then reinsert the card into the camera and try again.

5

2. Cautions The working voltage of the camera is 6.0V. The camera can be powered by four or

eight AA batteries (using four AA batteries will offer less battery output).

Please unlock write-protection before inserting the SD-card.

Please insert the SD-card when the power switch is in the OFF position before testing

the camera.

Please do not insert or take out the SD-card when the power switch is in the ON

position.

It is recommended to format the SD-card with the camera when being used for the

first time.

The camera will be in USB mode when connected to a USB port of a computer. In this

case, the SD-card functions as a removable disk.

Please ensure there is sufficient battery life when upgrading the firmware, otherwise

the upgrade process can be interrupted. If any issue occurs after an improper upgrading

process, the camera can potentially stop functioning properly.

3. Easy Operation 3.1 Power Supply

To supply power to the camera, four or eight AA size batteries are needed.

Open the bottom cover. Confirm that the power switch is in the OFF (right) position,

pull out the battery holder. Load the fully charged batteries into the holder according to

the polarity shown below. Push the battery holder back into the battery chamber. The

following batteries with 1.5V output can be used:

1. High-density and high-performance alkaline batteries (Recommended)

2. Rechargeable alkaline batteries

3. Rechargeable NiMH batteries

There are four battery slots. Slots 1 and 2 form one group (1 will be marked on the

holder), while slot 3 and 4 form the other group (2 will be marked on the holder) where

each group can supply power individually.

When in Test Mode, the camera will automatically shut down to save power if no

operations are performed within 3 minutes; it can be turned back on by any kind of motion

detection.

When in a low-battery state, the camera will be automatically shut down. Please

change the batteries at this time.

6

3.2 Insert the SD-card

Insert a SD-card into the card slot with contacts facing the front of the camera.

Please note that the SD-card can only be inserted in one direction. Make sure that

the write-protection Lock switch of the SD-card is in the Write position (not locked).

3.3 Power on and Enter the ON Mode

Before switching the camera on, please pay attention to the following:

1. Avoid temperature and motion disturbances that could be mistaken as animals or

humans such as trees that are exposed to direct sunlight for much of the day or any other

heat source. These may cause false triggers.

2. The camera should be placed about 1 meter (3 feet) from the ground. As an

example for deer, waist height is a good height. In general, one to two meters (3 6 feet)

in height is preferred.

Slide the power switch to the ON position to power on the camera.

After switching on the camera, the motion indication LED (red) will blink for about

15 seconds. The 15 second timer is a buffer before the camera starts to capture photos or

videos, e.g. for closing and locking the bottom cover, fixing the camera on a tree, or

walking away from the area being monitored.

When powered on, the camera will take pictures or videos automatically according

to default settings or custom settings. The camera has an audio recording function, so

sound will be embedded in recorded video clips.

3.4 Enter TEST Mode

Slide the power switch to the TEST position to enter into TEST mode. There are some

functions in TEST mode such as follows: custom settings, manual capture, preview.

3.4.1 Custom Settings

Press the MENU button to enter into the menu settings. The camera can be manually

customized which will display on the camera or an external TV monitor. The detailed

operations will be described in the Advanced Operations chapter of this manual.

3.4.2 Manual Capturing

You can press OK to manually capture photos or record video.

3.4.3 View Images or Videos

There are two ways to view the captured images or videos:

1. View using the LCD screen on the camera

2. View using a TV monitor which connects to the camera with a TV cable

Press RIGHT on the remote from the main screen. The latest image will be shown on

the LCD screen of the camera or TV monitor. Press UP to view the previous image and

7

press DOWN for the next image. Detailed operations like deleting images or videos are

described in the Advanced Operations chapter.

3.5 Power Off

Slide the power switch to the OFF position to power off the camera. Please note that

even in the OFF mode, the camera still consumes certain power at a minimal level.

Therefore, please remove the batteries if the camera will not be used for long periods

of time.

4. Advanced Operations From the basic operations of the camera in previous chapters, we know that the

camera has three basic operation modes:

1. OFF mode: Power switch is set to the OFF position (Right).

2. ON mode: Power switch is set to the ON position (Left).

3. TEST mode: Power switch is set to the TEST position (Middle).

In the above three modes, the OFF mode is the specified safe mode when replacing

the SD-card or batteries and transporting the camera.

This chapter explains the advanced operations for customizing the cameras settings.

The settings can only be customized in TEST mode and the remote control is needed to

do this.

4.1 Settings Menu

To view the cameras settings menu, press MENU while in TEST mode (called the

settings menu in this chapter). The settings menu will be shown on the cameras LCD or

the external TV monitor.

Navigating the menus and settings: The MENU key will enter into the settings menu,

and it will also exit the settings menu as well as go back to the previous menu. For

example, if you are selecting an option in the Resolution feature of the camera settings,

pressing MENU will exit the to the camera settings menu without saving the setting.

Pressing MENU again will exit to the main screen (info display). If you are at the same

feature menu and you press LEFT it will also exit to the camera settings without saving the

setting. Pressing LEFT again will put the focus back on the top level menus: Photo Settings,

Video

Settings, and System Settings. You can now press LEFT or RIGHT to navigate between

these 3 menus.

8

4.1.1 Photo Settings

4.1.2 Video Setting

9

4.1.3 System Setting

4.1.4 Default

Default Settings are listed as below:

Setting Default Options

Mode Camera Camera, Video, Camera &Video

Resolution (Camera) 12M 12M,8M,5M

Delay 5 Seconds 5-30 Seconds,1-30 Minute

Multi Single Single,3,6,9 Pictures

ISO 200 100,200,400

Resolution (Video) 1080P 1080P,720P,WVGA,QVGA

Video Length 10s 10s,30s,60s,90s

Date/Time Same as last time

YY/MM/DD,MM/DD/YY,DD/MM/YY Adjust

Distance High High, Normal, Low

Language English

English, French, Germany, Spanish and Russian

Timer 0:0:0 to 23:59:59 Adjust

Format Internal Memory Internal Memory, SD Card

10

TV Mode NTSC NTSC,PAL

Password Off Off, On

4.1.5 General Settings

The operating steps are suitable for the following menu items: Camera Mode, Photo

Size, Video Size, Multi, Video Length, Delay, and Timer.

4.1.6 Camera Mode

There are three camera modes: Camera, Video and Camera & Video. The way to set

the camera mode is via the settings menu.

The following shows how to set the camera mode to Video, provided that the

previous option is Photo:

a) Press MENU to display the settings menu.

b) Press RIGHT to go to the Setup Menu then DOWN to Mode.

c) Press RIGHT to open the submenu and select Video.

d) Press OK to save the current setting, then press menu to return to info display.

Press MENU return to the info display without saving the settings.

4.1.7 Format SD-Card

The system will delete all images or videos stored on the SD-card after formatting.

Make sure that you have made a backup of important data.

a) Press MENU to display the settings menu.

b) Press RIGHT to select the Setup menu.

c) Press DOWN to select Format.

d) Press RIGHT then select the SD Card.

e) Press down to select OK. OK will be highlighted.

f) Press OK to start formatting the SD-card. During formatting, the display screen

will show a message Please Wait as below.

Press MENU return to the info display without saving the settings.

Please Wait! 4.1.8 Photo Size

This parameter has three values: 12MP, 8MP and 5MP. The default value is 5 mega

pixels. The following shows how to set the photo size as 12MP:

a) Press MENU to display the settings menu.

b) Press RIGHT or LEFT to select the Camera menu.

c) Press DOWN to select Resolution.

d) Press Right then select 12M.

e) Press OK to save the current setting, then press menu to return to info

display. Press MENU return to the info display without saving the settings.

4.1.9 Video Size

This parameter also has four values: 1080P, 720P, WVGA, QVGA.

The default value is 1080P. The following shows how to set a 720P video size

provided that the previous option is at 1080P:

a) Press MENU to display the settings menu.

b) Press LEFT or RIGHT to select the Video menu.

c) Press DOWN to select Resolution.

d) Press RIGHT then select 720P

e) Press OK to save the current setting, then press MENU to return to info display.

Press MENU return to the info display without saving the settings.

11

4.1.10 Date and Time

You can change the date and time of the device by setting this parameter when

necessary, e.g., after every battery change. The date format is day/month/year, the time

format is hour: minute: second. The valid value for year is between 2010 and 2050.

Provided that the date and time are needed to be set to November 15th, 2011 at

10:30AM, the steps are as following:

a) Press MENU to display the settings menu.

b) Press RIGHT to enter the Setup menu.

c) Press DOWN to select Date/Time.

d) Press Right to Display Date/Time Interface, Press UP and DOWN to change the

time and date.

e) Press OK to save the current setting, then press menu to return to info display.

Press MENU return to the info display without saving the settings.

4.1.11 Multi

This parameter affects the number of pictures taken for each triggering while in

camera mode. It has four values: Single, 3 Pictures, 6 Pictures, and 9 Pictures. Its

default value is Single. The following shows how to set photo burst to 3 Pictures,

provided that the previous option is Single:

a) Press MENU to display the settings menu.

b) Press RIGHT or LEFT to select the Camera menu.

c) Press DOWN to select Multi.

c) Press RIGHT and select 3 pictures.

d) Press OK to save the current setting, then press menu to return to info display.

Press MENU return to the info display without saving the settings.

4.1.12 ISO

This menu can help get a better photo at night. There are 3 values: 100, 200, and 400.

The default value is 200. The following shows how to change the ISO setting.

a) Press MENU to display the settings menu.

b) Press RIGHT or LEFT to select the Camera menu.

c) Press DOWN and select the desired ISO value.

d) Press OK to save the current setting, then press menu to return to info display.

Press MENU return to the info display without saving the settings.

4.1.13 Video Length

This menu is used to set the length of the video that is recorded after it has been

triggered. It has 4 values: 10 Seconds, 30 Seconds, 60 Seconds, and 90 Seconds. The

following shows how to set video length to 30 Seconds, provided that the previous value

is 10 Seconds:

a) Press MENU to display the settings menu.

b) Press RIGHT or LEFT to select the video menu.

b) Press DOWN to select Video Length

c) Press RIGHT and select the desired video length.

d) Press OK to save the current setting, then press menu to return to info display.

Press MENU return to the info display without saving the settings.

4.1.14 Video Sound

The following shows how to turn off the sound on the video recording: a) Press

MENU to display the settings menu.

b) Press RIGHT or LEFT to select the Video menu.

c) Press DOWN to select Voice.

d) Press RIGHT and select if you want sound on or off.

12

e) Press OK to save the current setting, then press menu to return to info display.

Press MENU return to the info display without saving the settings.

4.1.15 Delay

This parameter is how long the PIR (Passive Infrared motion sensor) will be disabled

after each triggering while in the ON mode. During this time the PIR of the device will not

react to motion. The minimum interval is 1 second. This means the PIR works indefinitely

and photos/recordings are taken almost continuously. The maximum interval is 30

minutes. This means the PIR will be disabled for 30 minutes after each trigger. The default

value is 5 seconds.

The following shows how to set the PIR Triggering Interval Time to 1 minute provided

that the previous option is 5 seconds.

a) Press MENU to display the settings menu.

b) Press LEFT or RIGHT to select the Camera menu.

c) Press DOWN to select Timer.

d) Press RIGHT to view the options and DOWN to select 1 minute.

e) Press OK to save the current setting, then press menu to return to info display.

Press MENU return to the info display without saving the settings.

4.1.16 Timer

This parameter defines a certain time period during the day when the camera can be

triggered. The rest of the time the device is shut off. The effective value of the hour ranges

from 0 to 23 while the minute ranges from 0 to 59.

Provided that you want the camera to work from 8:00AM to 5:00PM, the steps are

as follows:

a) Press MENU to display the settings menu.

b) Press RIGHT to select the Setup menu.

b) Press DOWN to select Timer.

c) Press RIGHT to select a field and press UP or DOWN to change the value until the

start time changes to 8 and the stop time changes to 17.

d) Press OK to save the current setting, then press menu to return to info display.

Press MENU return to the info display without saving the settings.

4.1.17 Enter Password

If the password setting is set to On, after switching on the camera, the LCD screen on

the camera will prompt to enter the password. The default password setting is off. It can

be changed by the following steps:

a) Press MENU to display the settings menu.

b) Press RIGHT to select the Setup menu.

b) Press DOWN to select Password.

c) Select On, press OK, then press RIGHT to select 4 numbers as a password.

d) Press OK to save the current setting, then press menu to return to info display.

f) The LCD screen will prompt to enter password next time you switch on the camera.

Press MENU return to the info display without saving the settings.

4.2 Playback

In playback mode, images and videos can be viewed and deleted. The images and

videos can be viewed on the LCD screen on the camera or the TV monitor connected to

camera with the TV cable. For simplicity, operations with the PC wont be introduced here.

4.2.1 Viewing Photo or Video

a) Switch to TEST mode and enter into the info display.

b) Press RIGHT to view the latest picture (or video) on the LCD screen on the camera

or TV monitor.

c) Press LEFT to start playing the video being viewed.

13

d) Press LEFT again to pause the video.

e) Press UP to view the previous picture (or video) and DOWN for the next.

f) Press OK to return to info display.

When viewing images, the total number of all images in the SD-card and the index of

the displaying image will be shown respectively.

4.2.2 Delete Photo or Video

The operations are as follows:

a) Press RIGHT to display Photos and Videos.

b) Press MENU and select Delete.

c) Press RIGHT to select delete current or delete all.

d) Press OK. Cancel and OK are prompted.

e) Press OK to delete the image or video.

Press Cancel to cancel. Then press MENU then OK to return to info display.

Please note that after deleting a picture or a video file, the deleted files cannot be

restored. Furthermore, in order to delete all the images and video clips in the SD-card, it

is suggested to format the SD-card.

4.3 Laser Pointer

The laser pointer is especially useful when it is somewhat dark as an additional

function for pointing to an object or a certain region of interest (ROI).

Press * to turn on the laser light in TEST mode and use the tilt adjuster on the back

of the camera to adjust the angle for taking photos/videos.

NOTE: The laser pointer can be harmful to an individuals eyes, therefore please avoid

pointing the laser pointer at other individuals.

4.4 File Numbering

Images and videos are separately saved in the pre-named folder (100MEDIA). File

number increases as new photos or videos are taken. The file name is similar to

PTDC0001.JPG or PTDC0001.AVI. Through the suffix you can distinguish whether the file

is an image (with suffix .jpg) or a video (with suffix .avi).

4.5 Firmware Upgrade

This camera is equipped with an automatic firmware upgrade function. Upgrading is

needed only when an improved firmware is available. To update firmware, follow the

below steps:

1. Unzip the update file.

2. Copy the FW18NA.bin to an SD card.

3. Insert the SD card into the camera.

4. Power on the camera into Test Mode.

5. The camera will read the SD card and update itself automatically.

When updating the camera, the screen will be black.

6. The screen will light up after the update is finished.

7. Turn the camera off.

7. Remove the SD card, then insert it into a pc, and delete the FW18NA.bin file on

the SD card. (If you don't do this, the camera will try to update again when it is powered

on).

8. Insert the SD card into the camera like normal. The camera should have the latest

firmware installed at this point.

Appendix I: Technical Specifications Image Sensor Type(True

Megapixels) 8 Mega Pixels Color CMOS

14

Memory SD Card 8MB~32GB

Lens F=3.1; FOV=60

Size 145mm * 80mm * 55 mm

IR Filter: Full Automatic IR Filter

TFT Display Screen: 2.0 inch

PIR Sensitivity 3 sensitivity levels: High/Normal/Low

PIR Sensor Sight Angle 100 Degrees

PIR Sensing Distance 65ft/20m

Number of IR LED 36 LEDs Black or White

Max Night Vision Lighting Distance 65ft/20 meters

Trigger Speed 0.7 second

Low Battery Indicator Yes

Triggering Interval : 1 second ~ 60mins (default 5 sec)

Selectable Image Resolution: 12MP/8MP/5MP

Multiple Frame 1/3/6/9

Video Resolution 1080P/720P/WVGA/QVGA

File Format JPEG/AVI

Date/Time Imprint Yes

Moon Phase Imprint Yes

Exposure: Auto

MMS/EMAIL/SMS Support No support

Device Serial No 4 Digits and 26 alphabet set by yourself

Periodic shot 1Second~24Hours

Stand-by current 0.2mA

Stand-by time 3Months(2000mAh Lion battery)

Interface TV out (NTSC/PAL); USB; SD Card Holder; 6V DC External

Fix Method Belt, Tripod Mount Compatible

Operation Temperature -30 ~+70/-22~+158

Power Supply 8AA or 4AA battery

Camera Socket Yes

Water proof IP54

Security authentication

Manualsnet FAQs

If you want to find out how the ATC-1201W Amcrest works, you can view and download the Amcrest ATC-1201W Camera User Manual on the Manualsnet website.

Yes, we have the User Manual for Amcrest ATC-1201W as well as other Amcrest manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Amcrest ATC-1201W. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Amcrest ATC-1201W Camera User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Amcrest ATC-1201W Camera User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Amcrest ATC-1201W Camera User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Amcrest ATC-1201W Camera User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Amcrest ATC-1201W Camera User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.