Contents

Agilent InfinityLab LC Series Drain Connector Technical Note PDF

Download download
Agilent InfinityLab LC Series Drain Connector Technical Note PDF
Agilent Manual Agilent Drain Connector Manual Agilent InfinityLab LC Series Manual Agilent Drain Connector Technical Note
Pages 4
Year 2019
Language(s)
English en
1 of 4
1 of 4

Summary of Content for Agilent InfinityLab LC Series Drain Connector Technical Note PDF

Page 2

Agilent InfinityLab LC Series Drain Connectors Installation Technical Note

Page 4

Drain Connectors (available only as Drain Connectors Kit 5004-0000) have been developed to improve leak drainage for low flow leaks of high viscosity solvents (for example, isopropanol) in Agilent InfinityLab LC Series Systems. This Technical Note describes how to install Drain Connectors correctly.

Delivery Checklist Drain Connectors Kit (5004-0000) contains:

Parts can be ordered only as a complete kit.

Figure 1 Overview of Drain Connectors: Single (left) and Double (right)

# Description 3 Single Drain Connector 1 Double Drain Connector

Page 5

Agilent Technologies

Page 7

Installation Instructions Table 1 Compatibility of drain connectors and modules

Drain Connector Type Compatible Module Compatible Module Type Double G7116A/B Column Compartment Single G7114A/B

G7115A G7117A/B/C G7121A/B G7162A/B G7165A

Detector

G7129A/B/C G7167A/B G5668A G7157A G4767A

Sampler

G7122A Degasser G7104A/C G7110B G7111A/B G7112B G7120A G5654A G4782A

Pump

Preparations Leak drains of LC modules are clean and free of salt or solvent residuals.

NOTE Do not install drain connectors on the bottom modules of the stack. Drain outlet of the bottom module has to be connected via waste tubing to a suitable waste container (see Leak and Waste Handling in the manual for a respective module).

NOTE In case of incorrect installation, drain connectors cannot fully perform the intended function.

NOTE It is not required to power off the HPLC stack to install Single and Double Drain Connectors. The installation of the connectors does not affect the analysis performed during the installation.

Page 10

2

Page 12

1 To install the Double Drain Connector on the leak drain of the G7116A/B MCT, align the rings with the leak drain outlets of the MCT, press slightly with the fingers, and slide the connector along the leak drain outlets until it is aligned with the front of the leak drain.

OR

To install Single Drain Connectors on other Infinity II modules in the LC stack, align the ring with the leak drain outlet of the module, press slightly with the fingers, and slide the connector along the leak drain outlet until it is aligned with the front of the leak drain.

Page 15

3

Page 17

Make sure that the following requirements are covered:

The tip of the drain connector points straight down.

The leak drain outlets and the drain connectors are aligned properly.

Page 20

*01200-90180* *01200-90180* Part Number: 01200-90180 Document Number: D0000965

Edition: 11/2019 Printed in Germany

Agilent Technologies, Inc 2019

Agilent Technologies, In

Manualsnet FAQs

If you want to find out how the InfinityLab LC Series Agilent works, you can view and download the Agilent InfinityLab LC Series Drain Connector Technical Note on the Manualsnet website.

Yes, we have the Technical Note for Agilent InfinityLab LC Series as well as other Agilent manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Technical Note should include all the details that are needed to use a Agilent InfinityLab LC Series. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Agilent InfinityLab LC Series Drain Connector Technical Note is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Agilent InfinityLab LC Series Drain Connector Technical Note consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Agilent InfinityLab LC Series Drain Connector Technical Note free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Agilent InfinityLab LC Series Drain Connector Technical Note, simply download the document to your computer. Once downloaded, open the PDF file and print the Agilent InfinityLab LC Series Drain Connector Technical Note as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.