Contents

Agilent 1260 Infinity II G1364-68709 Adapter Kit Technical Note PDF

1 of 2
1 of 2

Summary of Content for Agilent 1260 Infinity II G1364-68709 Adapter Kit Technical Note PDF

Agilent 1260 Infinity II Preparative/Analytical Fraction Collector Install Exhaust Tube Adapter Kit G1364-68709

Technical Note

Exhaust Tube Adapter

This technical note describes the installation of the Exhaust Tube Adapter Kit (G1364-68709) to one of the following modules:

1260 Infinity II Preparative Fraction Collector (G1364E),

1260 Infinity II Analytical Fraction Collector (G1364F),

1260 Infinity II Bio-inert Fraction Collector (G5664B).

Exhaust Adapter Kit

The Exhaust Tube Adapter Kit (G1364-68709) contains:

p/n Description

G1364-03260 Exhaust Tube Adapter

5067-5406 Screw Tx20, M4 x 8 mm

Application and Safety Information

The exhaust tube adapter offers you the capability to connect your fraction collector to a laboratorys venting system, allowing the adaptation of a tube (not included) with an ID greater than 40 mm to your fraction collector.

Insufficient ventilation

Organic solvent vapours can reach explosive concentrations when they are not removed sufficiently with an appropriate venting system.

Connect the exhaust tube to the laboratorys venting system.

Ensure a minimum air flow of 10 m3 / h through the exhaust tube.

Ensure an underpressure in the venting system.

WARNING

Agilent Technologies

Installation

*G1364-90 *G1364-90 G1364-90230 Rev. B Edition: 05/2018

NOTE An air flow through the vent tube greater than 10 m3/h reduces the cooling performance of a thermostatted instrument and increases the evaporation of solvents in your fraction vessels.

Flammable solvent vapors

Fire or explosion hazard through electrostatic discharge

Ground the venting tube, the analytical equipment and the venting system.

1 Attach the exhaust tube adapter to the left side slits of the rear fan exhaust grid with an angle of about 90 .

2 Push the adapter into the grid and turn it sidewards, so that its latch covers the hole for the holding screw.

3 Use the screw delivered in the Exhaust tube adapter kit to fasten the adapter latch to the rear of the fraction collector.

Next Steps:

4 Obtain and attach an exhaust tube (tube ID must be slightly greater than 40 mm) to the adapter. An exhaust tube is NOT provieded with the Exhaust Tube Adapter kit. The exhaust tube must be mechanically stable, leak tight and resistant to the solvents used in your system.

5 Fix the exhaust tube to the adapter with an appropriate connector (e.g. hose clamp). Ground the exhaust tube.

6 The other outlet of the exhaust tube must be installed in a fume hood or connected to a vent system in a way, that the

Manualsnet FAQs

If you want to find out how the 1260 Infinity II Agilent works, you can view and download the Agilent 1260 Infinity II G1364-68709 Adapter Kit Technical Note on the Manualsnet website.

Yes, we have the Technical Note for Agilent 1260 Infinity II as well as other Agilent manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Technical Note should include all the details that are needed to use a Agilent 1260 Infinity II. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Agilent 1260 Infinity II G1364-68709 Adapter Kit Technical Note is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Agilent 1260 Infinity II G1364-68709 Adapter Kit Technical Note consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Agilent 1260 Infinity II G1364-68709 Adapter Kit Technical Note free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Agilent 1260 Infinity II G1364-68709 Adapter Kit Technical Note, simply download the document to your computer. Once downloaded, open the PDF file and print the Agilent 1260 Infinity II G1364-68709 Adapter Kit Technical Note as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.