Acura TSX Sport Wagon 2012 Wagon Owner's Manual PDF

2012 TSX Sport Wagon Owners Manual

(Unlinked)

This document does not contain hyperlinks and may be formatted for printing instead of web use. This is due to changes

in content and specifications of the vehicle that happen throughout the model year. This manual will be replaced with a

hyperlinked version at the end of the model year.

P/N 00X31-TL7- 2011 American Honda Motor Co., Inc. - All Rights Reserved 6100

2012 TSX5D-31TL7610.book 0

Contents

This owners manual should be considered a permanent part of the vehicle and should remain with the vehicle when it is sold.

This owners manual covers all models of your vehicle. You may find descriptions of equipment and features that are not on your particular model.

Images throughout this owners manual (including the front cover) represent features and equipment that are available on some, but not all, models. Your particular model may not have some of these features.

The information and specifications included in this publication were in effect at the time of approval for printing. Honda Motor Co., Ltd. reserves the right, however, to discontinue or change specifications or design at any time without notice and without incurring any obligation.

2 Safe Driving P. 21 For Safe Driving P. 22 Seat Belts P. 26 Airbags P. 34

2 Instrument Panel P. 63 Indicators P. 64 Gauges and Multi-Information Display P. 74

2 Controls P. 85 Setting the Clock P. 86 Locking and Unlocking the Doors P. 87 Opening and Closing the Moonroof P. 104 Adjusting the Seats P. 118

2 Features P. 145 Audio System P. 146 Audio System Basic Operation P. 149 General Information on the Audio System P. 169

2 Driving P. 189 Before Driving P. 190 Towing a Trailer P. 195 Refueling P. 221 Fuel Economy P. 224

2 Maintenance P. 227 Before Performing Maintenance P. 228 Maintenance MinderTM P. 231 Checking and Maintaining Wiper Blades P. 255 Climate Control System Maintenance P. 270

2 Handling the Unexpected P. 275 Temporarily Repairing a Flat Tire P. 276 Engine Does Not Start P. 284 Overheating P. 288 Indicator, Coming On/Blinking P. 290 When You Cannot Unlock the Fuel Fill Door P. 300

2 Information P. 303 Specifications P. 304 Identification Numbers P. 306 Emissions Testing P. 309 Warranty Coverages P. 311

Contents

2012 TSX5D-31TL7610.book 1

Child Safety P. 49 Exhaust Gas Hazard P. 61 Safety Labels P. 62

Opening and Closing the Tailgate P. 93 Security System P. 99 Opening and Closing the Windows P. 101 Operating the Switches Around the Steering Wheel P. 105 Adjusting the Mirror P. 116 Interior Lights/Interior Convenience Items P. 127 Climate Control System P. 140

Audio Error Messages P. 166 Audio Remote Controls P. 168 HomeLink Universal Transceiver P. 173 Bluetooth HandsFreeLink P. 175 Compass* P. 187

When Driving P. 199 Braking P. 216 Parking Your Vehicle P. 220 Accessories and Modifications P. 225

Maintenance Under the Hood P. 235 Replacing Light Bulbs P. 247 Checking and Maintaining Tires P. 259 Battery P. 268 Remote Transmitter Care P. 269 Cleaning P. 271

Jump Starting P. 285 Shift Lever Does Not Move P. 287 Fuses P. 294 Emergency Towing P. 299 When You Cannot Open or Close the Tailagte P. 301

Devices that Emit Radio Waves P. 307 Reporting Safety Defects P. 308 Authorized Manuals P. 313 Client Service Information P. 314

Quick Reference Guide P. 2

Safe Driving P. 21

Instrument Panel P. 63

Controls P. 85

Features P. 145

Driving P. 189

Maintenance P. 227

Handling the Unexpected P. 275

Information P. 303

Index P. 315

2

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 2

Quick Reference Guide

Visual Index System Indicators (P64)

Gauges (P74)

Navigation System* () See Navigation System Manual

Audio System (P146)

Hazard Warning Button Climate Control System (P140)

Rear Window Defogger/ Heated Door Mirror Button (P112)

Seat Heater Switches (P138)

Steering Wheel Adjustments (P115)

Multi-Information Display (P75)

(Vehicle Stability Assist (VSA) System OFF) Button (P210)

Ignition Switch (P105)

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 3

Headlights/Turn Signals (P106)

Fog Lights (P108)

Paddle Shifter (Shift down) (P205,206)

Navigation System Voice Control Buttons* () See Navigation System Manual

Bluetooth HandsFreeLink System Voice Control Buttons (P175)

Horn

Remote Audio Control Buttons (P168)

Paddle Shifter (Shift up) (P205,206)

SEL/RESET Button (P75)

(Information) Button (P75)

Wipers/Washers (P109)

Cruise Control Buttons (P207)

* Not available on all models

3

Visual Index

4

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 4

Door Mirror Controls (P116)

Parking Brake (P216)

Glove Box (P129)

Rearview Mirror (P116)

Shift Lever Automatic Transmission (P202)

Driver Side Fuse Box (P294)

Passenger Side Fuse Box (P295)

Drivers Pocket Power Tailgate Button* (P93)

Power Window Switches (P101)

Driving Position Memory System Buttons (P113)

Drivers Front Airbag (P37)

Hood Release Handle (P 236)

Passengers Front Airbag (P37)

Accessory Power Socket (P134)

Power Door Lock Master Switch (Unlocking Fuel Fill Door) (P91)

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 5

Seat Belt with Detachable Anchor (P31)

Seat Belt Installing a Child Seat (P56)

Seat Belt to Secure a Child Seat (P57)

Moonroof Switch (P104)

Spotlights (P127)

Front Seat (P118)

Seat Belts (P26)

Side Airbags (P41)

Rear Seat (P125)

Cargo Area Light (P128)

Ceiling Light (P127)

Side Curtain Airbags (P44)

Coat Hook (P135)

Grab Handle

HomeLink Button (P173)

Sunglasses Holder (P137)

Sun Visors Vanity Mirrors

USB Adapter Cable (P147)

Accessory Power Socket (P134)

Center Pocket*

LATCH to Secure a Child Seat (P54)

Auxiliary Input Jack (P148)

* Not available on all models

5

Visual Index

6

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 6

Maintenance Under the Hood (P235)

Windshield Wipers (P109, 255)

Tires (P259, 276)

Fog Lights (P108, 248)

Door Lock/Unlock Control (P89)

Side Turn Signal Lights (P106,250)

Headlights (P106, 247)

Front Turn Signal/Parking/Side Marker Lights (P106, 249)

How to Refuel (P222)

High-Mount Brake Light (P251)

Rear Wiper (P110, 257)

Opening/Closing the Tailgate (P93)

Back-Up Lights (P252)

Brake/Taillights/Rear Side Marker Lights (P251)

Audio Antenna (P147)

Door Mirrors (P116)

Tailgate Open Handle (P94)

Rear Turn Signal Lights (P251)

Rearview Camera* () See Navigation System Manual

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 7

Safe Driving (P21)

Airbags (P34)

Your vehicle is fitted with airbags to help protect you and your passengers during a moderate-to-severe collision.

Child Safety (P49)

All children 12 and younger should be seated in the rear seat. Smaller children should be properly restrained in a forward-facing child seat. Infants must be properly restrained in a rear-facing child seat.

Exhaust Gas Hazard (P61)

Your vehicle emits dangerous exhaust gases that contain carbon monoxide. Do not run the engine in confined spaces where carbon monoxide gas can accumulate.

Before Driving Checklist (P25)

Before driving, check that the front seats, head restraints, steering wheel, and mirrors have been properly adjusted.

Seat Belts (P26)

Fasten your seat belt and sit upright well back in the seat.

Check that your passengers are wearing their seat belts correctly.

Fasten your lap belt as low as possible.

* Not available on all models

7

8

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 8

Instrument Panel (P63)

System Indicators

Malfunction Indicator Lamp

Low Oil Pressure Indicator

Anti-lock Brake System (ABS) Indicator

Vehicle Stability Assist (VSA) System Indicator

VSA OFF Indicator

Low Tire Pressure/ TPMS Indicator

Electric Power Steering (EPS) Indicator

Lights On Indicator

High Beam Indicator

Fog Light Indicator

Immobilizer System Indicator

Seat Belt Reminder Indicator

System Indicators

System Message Indicator

Parking Brake and Brake System Indicator

Supplemental Restraint System Indicator

Side Airbag Off Indicator

Door and Tailgate Open Indicator

CRUISE MAIN Indicator

Tachometer

Low Fuel IndicatorSecurity System Alarm Indicator

Shift Lever Position Indicator

Gauges (P 74)

Multi-Information Display (P 75)

System Indicators (P 64)

Turn Signal and Hazard Warning Indicators

Gear Position Indicator

Charging System Indicator

CRUISE CONTROL Indicator

Lights Reminders

Multi-Information Display

Speedometer

Fuel Gauge

Temperature Gauge

2012 TSX5D-31TL7610.book 9

Controls (P 85)

Q u

ick R eferen

ce G u

id e

Turn Signals (P106)

Turn Signal Control Lever

Right

Left

Lights (P106)

Light Control Switches

Low Beam

High Beam

Flashing

Wipers and Washers (P109)

Wiper/Washer Control Lever

Adjustment Ring : Long Delay : Short Delay

MIST OFF INT: Low speed with intermittent LO: Low speed wipe HI: High speed wipe

Pull toward you to spray washer fluid.

9

10

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 10

Steering Wheel (P115)

To adjust, pull the adjustment lever towards you, adjust to the desired position, then lock the lever back in place.

Tailgate (P93)

With all the doors unlocked, pull the tailgate open handle on the tailgate to open it.

Press the power tailgate button on the drivers door or the remote transmitter to open and close the power tailgate.

Model with the power tailgate

Power Door Mirrors (P116)

With the ignition switch in ON (w, move the selector switch to L or R.

Push the appropriate edge of the adjustment switch to adjust the mirror.

Place the selector switch in the R position to use the reverse tilt door mirror feature.

Selector Switch

Adjustment Switch

Power Windows (P101)

With the ignition switch in ON (w, open and close the power windows.

If the power window lock button is in the off position, each passengers window can be opened and closed with its own switch.

If the power window lock button is in the on position (indicator is on), each passengers window switch is disabled.

Power Window Lock Button

Window Switch

Indicator

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 11

Climate Control System (P140)

Press the AUTO button to activate the climate control system. Press the ON/OFF button to turn the system on or off. Press the button to defrost the windshield.

The climate control system is voice operable. See the navigation system manual for complete details.

Models with navigation system

(Rear Window Defogger/ Heated Mirror) Button

(Windshield Defroster) Button

A/C (Air Conditioning) Button

Air flows from dashboard vents and back of the center console.

Air flows from floor and dashboard vents, and back of the center console.

Air flows from floor vents.

Air flows from floor and windshield defroster vents.

(Recirculation) Button

(Fan Control) Bar

Passengers Side Temperature Control Switch

SYNC (Synchronized) Button

AUTO Button

Drivers Side Temperature Control Switch

ON/OFF Button MODE Control Button

Clock (P86)

a Press the CLOCK button until the displayed time begins flashing.

b Press Preset (4 (Hour) or (5 (Minute) to set the time. Press Preset (6 (Reset) to set the time to the nearest hour.

c Press the CLOCK button again to set the time.

The navigation system receives signals from GPS satellites, updating the clock automatically.

Models without navigation system

Models with navigation system

11

12

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 12

Features (P145)

Audio System (P146)

For navigation system operation () See Navigation System Manual

Audio Display

AM Button FM Button

SCAN Button

CATEGORY Bar

A.SEL (Auto Select) Button

(Volume/Power) Knob

VOL/

CD Slot

AUX Button

CD Button

(CD Eject) Button

Preset Buttons

SKIP Bar

TITLE Button

(XM) Button

MENU Button

Selector KnobRETURN Button

Audio Remote Controls (P168)

VOL (volume) Button Press / to adjust the volume up/ down.

MODE Button Press and release to change the audio mode: FM1/FM2/AM/XM1/XM2/CD/AUX.

CH (channel) Button Radio:Press and release to change the

preset station. Press and hold to select the next or previous strong station.

CD/USB device: Press and release to skip to the beginning of the next song or return to the beginning of the current song. Press and hold to change a folder.

VOL Button

CH Button

MODE Button

13

Q u

ick R eferen

ce G u

id e

Driving (P189)

Release Button

Shift Lever

Depress the brake pedal and press the release button to move out of (P.

Move the shift lever without pressing the release button.

Press the release button to move the shift lever.

Automatic Transmission (P203)

Shift to (P and depress the brake pedal when starting the engine.

Shifting

Park Turn off or start the engine. Transmission is locked.

Reverse

Neutral Transmission is not locked.

Drive Normal driving. D-paddle shift mode can be used.

S Position Sequential shift mode can be used.

Paddle Shifters (P205)

Paddle shifters allow you to shift gears much like a manual transmission (1st through 5th). This is useful for engine braking.

D-paddle shift mode: The transmission will shift back to automatic mode once the system detects that the vehicle is cruising.

Sequential shift mode: Holds the selected gear, and the M indicator comes on.

The selected gear position is shown in the instrument panel.

Shift Down (- Paddle Shifter

Shift Up (+ Paddle Shifter

Selected Gear Number

(M Indicator

2012 TSX5D-31TL7610.book 13

14

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 14

VSA OFF Button (P211)

The vehicle stability assist (VSA) system helps stabilize the vehicle during cornering, and helps maintain traction while accelerating on loose or slippery road surfaces.

VSA comes on automatically every time you start the engine.

To turn VSA on or off, press and hold the button until you hear a beep.

Cruise Control (P207)

Cruise control allows you to maintain a set speed without keeping your foot on the accelerator pedal.

To use cruise control, press the CRUISE button, then press DECEL/SET when the vehicle speed is above 25 mph (40 km/h).

Tire Pressure Monitoring System (TPMS) (P212)

TPMS monitors tire pressure. TPMS is turned on automatically every

time you start the engine.

Refueling (P 221)

a Unlock the drivers door.

b Press on the edge of the fuel fill door to make it pop up slightly.

c Turn the fuel fill cap slowly to remove the cap.

d Place the cap in the holder on the fuel fill door.

e After refueling, screw the cap back on until it clicks at least once.

Fuel recommendation: Premium unleaded gasoline with a pump octane number 91 or higher recommended

Fuel tank capacity: 18.5 US gal (70 L)

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 15

Maintenance (P 227)

Under the Hood (P 235)

Check engine oil, engine coolant, and windshield washer fluid. Add when necessary.

Check brake fluid. Check the battery regularly.

a Pull the hood release handle under the corner of the dashboard.

b Locate the hood latch lever, pull the lever up, and lift up the hood.

c When finished, close the hood and make sure it is firmly locked in place.

Lights (P247)

Inspect all lights regularly.

Wiper Blades (P255)

Replace blades if they leave streaks across the windshield.

Tires (P259)

Inspect tires and wheels regularly. Check tire pressures regularly. Install snow tires for winter

driving.

15

16

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 16

Handling the Unexpected (P 275)

Flat Tire (P276)

Park in a safe location and repair the flat tire using the tire repair kit.

Indicators Come On (P290)

Identify the indicator and consult the owners manual.

Engine Wont Start (P284)

If the battery is dead, jump start using a booster battery.

Blown Fuse (P294)

Check for a blown fuse if an electrical device does not operate.

Overheating (P288)

Park in a safe location. If you do not see steam under the hood, open the hood, and let the engine cool down.

Emergency Towing (P299)

Call a professional towing service if you need to tow your vehicle.

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 17

What to Do If The ignition switch does not turn from (0 to (q. Why?

The steering wheel may be locked. Try to turn the steering wheel left and right

while turning the ignition key.

The ignition switch does not turn from (q to (0 and I cannot remove the key. Why?

The shift lever should be moved to (P.

Why does the brake pedal pulsate slightly when applying the brakes?

This can occur when the ABS activates, and does not indicate a problem. Apply firm, steady pressure on the brake pedal. Never pump the brake pedal.

The rear door cannot be opened from inside the vehicle. Why?

Check if the childproof lock is in the lock position. If so, open the rear door with the outside door handle. To cancel this function, push the lever to the unlock position.

Why do the doors lock after I unlocked the doors using a remote transmitter?

If you do not open the doors within 30 seconds, the doors are relocked automatically for security.

17

18

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 18

Why does the beeper sound when I open the drivers door?

The beeper sounds when: The key is left in the ignition switch. The exterior lights are left on.

Why does the beeper sound when I start driving?

The beeper sounds when: Driver and/or front passenger are not wearing their seat belts. The parking brake lever is not fully released.

Why do I hear a screeching sound when I apply the brake pedal?

The brake pads may need to be replaced. Have your vehicle inspected by a dealer.

Is it possible to use unleaded gasoline with a Pump Octane Number (PON) of 87 or higher on this vehicle?

The recommended fuel is premium unleaded gasoline with a PON of 91 or higher. If this fuel is not available, you can temporarily use unleaded gasoline with a PON of 87 or higher. This will result in decreased engine performance, and can cause occasional metallic knocking noise in the engine.

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 19

California Proposition 65 Warning

Event Data Recorders This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicles systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: How various systems in your vehicle were operating; Whether or not the driver and passenger safety belts were

buckled/fastened; How far (if at all) the driver was depressing the accelerator

and/or brake pedal; and, How fast the vehicle was traveling. These data can help provide a better understanding of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.

WARNING: This product contains or emits chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.

To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR.

The data belongs to the vehicle owner and may not be accessed by anyone else except as legally required or with the permission of the vehicle owner.

Service Diagnostic Recorders This vehicle is equipped with service-related devices that record information about powertrain performance. The data can be used to verify emissions law requirements and/or help technicians diagnose and solve service problems. It may also be combined with data from other sources for research purposes, but it remains confidential.

California Perchlorate Contamination Prevention Act The airbags, seat belt tensioners, and CR type batteries in this vehicle may contain perchlorate materials - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/

As you read this manual, you will find information that is preceded by a symbol. This information is intended to help you avoid damage to your vehicle, other property, or the environment.

NOTICE

19

20

Q u

ick R eferen

ce G u

id e

2012 TSX5D-31TL7610.book 20

A Few Words About Safety

Your safety, and the safety of others, is very important. And operating this vehicle safely is an important responsibility.

To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could hurt you or others.

Of course, it is not practical or possible to warn you about all the hazards associated with operating or maintaining your vehicle. You must use your own good judgement.

You will find this important safety information in a variety of forms, including:

Safety Labels - on the vehicle. Safety Messages - preceded by a safety alert symbol 3 and

one of three signal words: DANGER, WARNING, or CAUTION. These signal words mean:

Safety Headings - such as Important Safety Precautions. Safety Section - such as Safe Driving. Instructions - how to use this vehicle correctly and safely.

This entire book is filled with important safety information - please read it carefully.

3DANGER You WILL be KILLED or SERIOUSLY HURT if you don't follow instructions.

3WARNING You CAN be KILLED or SERIOUSLY HURT if you don't follow instructions.

3CAUTION You CAN be HURT if you don't follow instructions.

2012 TSX5D-31TL7610.book 21

Safe Driving

You can find many safety recommendations throughout this chapter, and throughout this manual.

For Safe Driving Important Safety Precautions ............. 22 Your Vehicles Safety Features............ 24

Seat Belts About Your Seat Belts........................ 26 Fastening a Seat Belt.......................... 29 Seat Belt Inspection............................ 33

Airbags Airbag System Components............... 34 Types of Airbags ................................ 37 Front Airbags (SRS) ............................ 37 Side Airbags....................................... 41

Side Curtain Airbags .......................... 44 Airbag System Indicators.................... 45 Airbag Care ....................................... 48

Child Safety Protecting Child Passengers ............... 49 Safety of Infants and Small Children .. 51 Safety of Larger Children ................... 59

Exhaust Gas Hazard Carbon Monoxide Gas....................... 61

Safety Labels Label Locations .................................. 62

21

22

Safe D rivin

g

2012 TSX5D-31TL7610.book 22

For Safe Driving

1Important Safety Precautions

Some states, provinces and territories prohibit the use of cell phones other than hands-free devices by the driver while driving.

The following pages explain your vehicles safety features and how to use them properly. The safety precautions below are ones that we consider to be among the most important.

Important Safety Precautions Always wear your seat belt A seat belt is your best protection in all types of collisions. Airbags are designed to supplement seat belts, not replace them. So even though your vehicle is equipped with airbags, make sure you and your passengers always wear your seat belts, and wear them properly.

Restrain all children Children age 12 and under should ride properly restrained in a back seat, not the front seat. Infants and small children should be restrained in a child seat. Larger children should use a booster seat and a lap/shoulder seat belt until they can use the belt properly without a booster seat.

Be aware of airbag hazards While airbags can save lives, they can cause serious or fatal injuries to occupants who sit too close to them, or are not properly restrained. Infants, young children, and short adults are at the greatest risk. Be sure to follow all instructions and warnings in this manual.

Dont drink and drive Alcohol and driving dont mix. Even one drink can reduce your ability to respond to changing conditions, and your reaction time gets worse with every additional drink. So dont drink and drive, and dont let your friends drink and drive, either.

uuFor Safe Drivingu Important Safety Precautions Safe D

rivin g

2012 TSX5D-31TL7610.book 23

Pay appropriate attention to the task of driving safely Engaging in cell phone conversation or other activities that keep you from paying close attention to the road, other vehicles, and pedestrians could lead to a crash. Remember, situations can change quickly, and only you can decide when it is safe to divert some attention away from driving.

Control your speed Excessive speed is a major factor in crash injuries and deaths. Generally, the higher the speed, the greater the risk, but serious injuries can also occur at lower speeds. Never drive faster than is safe for current conditions, regardless of the maximum speed posted.

Keep your vehicle in safe condition Having a tire blowout or a mechanical failure can be extremely hazardous. To reduce the possibility of such problems, check your tire pressures and condition frequently, and perform all regularly scheduled maintenance.

23

24

uuFor Safe DrivinguYour Vehicles Safety Features

Safe D rivin

g

1Your Vehicles Safety Features

Your vehicle is equipped with many features that work together to help protect you and your passengers during a crash.

Some features do not require any action on your part. These include a strong steel framework that forms a safety cage around the passenger compartment, front and rear crush zones, a collapsible steering column, and tensioners that tighten the front seat belts in a sufficient crash.

However, you and your passengers cannot take full advantage of these features unless you remain seated in the correct position and always wear your seat belts. In fact, some safety features can contribute to injuries if they are not used properly.

2012 TSX5D-31TL7610.book 24

Your Vehicles Safety Features

The following checklist will help you take an active role in protecting yourself and your passengers.

a Safety Cage b Crush Zones c Seats and Seat-Backs d Head Restraints e Collapsible Steering Column f Seat Belts g Front Airbags h Side Airbags i Side Curtain Airbags j Door Locks k Seat Belt Tensioners l Occupant Position Detection System (OPDS) Sensor

ab b

e

f

i l

j

k

g

h

d

c

g

j

h

i

uuFor Safe DrivinguYour Vehicles Safety Features Safe D

rivin g

1Safety Checklist

If the door and tailgate open indicator is on, a door and/or the tailgate is not completely closed. Close all doors and the tailgate tightly until the indicator goes off.

2 Door and Tailgate Open Indicator P. 68

2012 TSX5D-31TL7610.book 25

For the safety of you and your passengers, make a habit of checking these items each time before you drive. After everyone has entered the vehicle, be sure all doors and the tailgate are

closed and locked. Locking the doors and the tailgate helps prevent an occupant from being ejected and an outsider from unexpectedly opening a door or the tailgate.

2 Locking/Unlocking the Doors from the Inside P. 91

Adjust your seat to a position suitable for driving. Be sure the front seats are adjusted as far to the rear as possible while allowing the driver to control the vehicle. Sitting too close to a front airbag can result in serious or fatal injury in a crash.

2 Adjusting the Seats P. 118

Adjust head restraints to the proper position. Head restraints are most effective when the center of the head restraint aligns with the center of your head. Taller persons should adjust their head restraint to the highest position.

2 Adjusting the Head Restraints P. 120

Always wear your seat belt, and make sure you wear it properly. Confirm that any passengers are properly belted as well.

2 Fastening a Seat Belt P. 29

Protect children by using seat belts or child seats according to a childs age, height and weight.

2 Child Safety P. 49

Safety Checklist

25

26

Safe D rivin

g

2012 TSX5D-31TL7610.book 26

Seat Belts

1About Your Seat Belts

Seat belts cannot completely protect you in every crash. But in most cases, seat belts can reduce your risk of serious injury.

Most states and all Canadian provinces and territories require you to wear seat belts.

3WARNING Not wearing a seat belt properly increases the chance of serious injury or death in a crash, even though your vehicle has airbags.

Be sure you and your passengers always wear seat belts and wear them properly.

About Your Seat Belts Seat belts are the single most effective safety device because they keep you connected to the vehicle so that you can take advantage of many built-in safety features. They also help keep you from being thrown against the inside of the vehicle, against other passengers, or out of the vehicle. When worn properly, seat belts also keep your body properly positioned in a crash so that you can take full advantage of the additional protection provided by the airbags.

In addition, seat belts help protect you in almost every type of crash, including: - frontal impacts - side impacts - rear impacts - rollovers

Lap/shoulder seat belts All five seating positions are equipped with lap/shoulder seat belts with emergency locking retractors. In normal driving the retractor lets you move freely while keeping some tension on the belt. During a collision or sudden stop the retractor locks to restrain your body. The rear seat belts also have a lockable retractor for use with child seats.

2 Installing a Child Seat with a Lap/Shoulder Seat Belt P. 56

uuSeat BeltsuAbout Your Seat Belts Safe D

rivin g

1About Your Seat Belts

If a rear seat passenger moves around and extends the seat belt, the lockable retractor may activate. If this happens, release the retractor by unfastening the seat belt and allow the belt to retract completely. Then refasten the belt.

1Seat Belt Reminder

The indicator will also come on if a front passenger does not fasten their seat belt within 6 seconds after the ignition switch is turned to ON (w. When no one is sitting in the front passengers seat, or a child or small adult is riding there, the indicator will not come on. This is because the weight sensors in the seat cannot detect their presence.

2012 TSX5D-31TL7610.book 27

Proper use of seat belts Follow these guidelines for proper use: All occupants should sit upright, well back in the seat, and remain in that position

for the duration of the trip. Slouching and leaning reduces the effectiveness of the belt and can increase the chance of serious injury in a crash.

Never place the shoulder part of a lap/shoulder seat belt under your arm or behind your back. This could cause very serious injuries in a crash.

Two people should never use the same seat belt. If they do, they could be very seriously injured in a crash.

Do not put any accessories on the seat belts. Devices intended to improve comfort or reposition the shoulder part of a seat belt can reduce the protective capability and increase the chance of serious injury in a crash.

Your vehicle monitors front seat belt use. If the ignition switch is turned to ON (w before the drivers seat belt is fastened, a beeper will sound and the indicator will blink. If the driver does not fasten the belt before the beeper stops, the indicator will remain on.

The beeper will also periodically sound and the indicator will blink while driving until the drivers and front passengers seat belts are fastened.

Seat Belt Reminder

Continued 27

uuSeat BeltsuAbout Your Seat Belts

28

Safe D rivin

g

1Automatic Seat Belt Tensioners

The seat belt tensioners can only operate once. If a tensioner is activated, the SRS indicator will come on. Have a dealer replace the tensioner and thoroughly inspect the seat belt system as it may not offer protection in a subsequent crash.

During a moderate-to-severe side impact, the tensioner on that side of the vehicle also activates.

2012 TSX5D-31TL7610.book 28

The front seats are equipped with automatic seat belt tensioners to enhance safety.

The tensioners automatically tighten the front seat belts during a moderate-to- severe frontal collision, sometimes even if the collision is not severe enough to inflate the front airbags.

Automatic Seat Belt Tensioners

uuSeat BeltsuFastening a Seat Belt Safe D

rivin g

1Fastening a Seat Belt

No one should sit in a seat with an inoperative seat belt or one that does not appear to be working correctly. Using a seat belt that is not working properly may not protect the occupant in a crash. Have a dealer check the belt as soon as possible.

Never insert any foreign objects into the buckle or retractor mechanism.

2012 TSX5D-31TL7610.book 29

Fastening a Seat Belt After adjusting a front seat to the proper position, and while sitting upright and well back in the seat:

2 Adjusting the Seats P. 118

1. Pull the seat belt out slowly.

2. Insert the latch plate into the buckle, then tug on the belt to make sure the buckle is secure. u Make sure that the belt is not twisted or

caught on anything.

Pull out slowly.

Correct Seated Posture.

Latch Plate

Buckle

29Continued

uuSeat BeltsuFastening a Seat Belt

30

Safe D rivin

g

1Fastening a Seat Belt

To release the belt, push the red PRESS button then guide the belt by hand until it has retracted completely. When exiting the vehicle, be sure the belt is out of the way and will not get caught by closing the door.

3WARNING Improperly positioning the seat belts can cause serious injury or death in a crash.

Make sure all seat belts are properly positioned before driving.

1Adjusting the Shoulder Anchor

The shoulder anchor height can be adjusted to four levels. If the belt contacts your neck, lower the height one level at a time.

After an adjustment, make sure that the shoulder anchor position is secure.

2012 TSX5D-31TL7610.book 30

3. Position the lap part of the belt as low as possible across your hips, then pull up on the shoulder part of the belt so the lap part fits snugly. This lets your strong pelvic bones take the force of a crash and reduces the chance of internal injuries.

4. If necessary, pull up on the belt again to remove any slack, then check that the belt rests across the center of your chest and over your shoulder. This spreads the forces of a crash over the strongest bones in your upper body.

The front seats have adjustable shoulder anchors to accommodate taller and shorter occupants.

1. Move the anchor up and down while holding the release button.

2. Position the anchor so that the belt rests across the center of your chest and over your shoulder.

Lap belt as low as possible

Adjusting the Shoulder Anchor

Push

uuSeat BeltsuFastening a Seat Belt Safe D

rivin g

1Seat Belt with Detachable Anchor

To unlatch the detachable anchor, insert the latch plate into the slot on the side of the anchor buckle.

3WARNING Using the seat belt with the detachable anchor unlatched increases the chance of serious injury or death in a crash.

Before using the seat belt, make sure the detachable anchor is correctly latched.

Latch Plate

Small Latch Plate

2012 TSX5D-31TL7610.book 31

1. Pull out the seat belts small latch plate and the latch plate from each holding slot in the ceiling.

2. Line up the triangle marks on the small latch plate and anchor buckle. Make sure the seat belt is not twisted. Attach the belt to the anchor buckle.

3. Insert the latch plate into the buckle. Properly fasten the seat belt the same way you fasten the lap/shoulder seat belt.

Seat Belt with Detachable Anchor

Small Latch Plate

Latch Plate

Small Latch Plate

Anchor Buckle

Latch Plate

Buckle

Continued 31

uuSeat BeltsuFastening a Seat Belt

32

Safe D rivin

g

1Advice for Pregnant Women

Each time you have a checkup, ask your doctor if it is okay for you to drive.

To reduce the risk of injuries to both you and your unborn child that can be caused by an inflating front airbag: When driving, sit upright and adjust the seat as far

back as possible while allowing full control of the vehicle.

When sitting in the front passengers seat, adjust the seat as far back as possible.

2012 TSX5D-31TL7610.book 32

If you are pregnant, the best way to protect yourself and your unborn child when driving or riding in a vehicle is to always wear a seat belt and keep the lap part of the belt as low as possible across the hips.

Advice for Pregnant Women

Wear the shoulder belt across the chest avoiding the abdomen.

Wear the lap part of the belt as low as possible across the hips.

uuSeat BeltsuSeat Belt Inspection Safe D

rivin g

1Seat Belt Inspection

3WARNING Not checking or maintaining seat belts can result in serious injury or death if the seat belts do not work properly when needed.

Check your seat belts regularly and have any problem corrected as soon as possible.

2012 TSX5D-31TL7610.book 33

Seat Belt Inspection Regularly check the condition of your seat belts as follows:

Pull each belt out fully, and look for frays, cuts, burns, and wear. Check that the latches work smoothly and the belts retract easily. u If a belt does not retract easily, cleaning the belt may correct the problem. Only

use a mild soap and warm water. Do not use bleach or cleaning solvents. Make sure the belt is completely dry before allowing it to retract.

Any belt that is not in good condition or working properly will not provide proper protection and should be replaced as soon as possible. A belt that has been worn during a crash may not provide the same level of protection in a subsequent crash. Have your seat belts inspected by a dealer after any collision.

33

34

Safe D rivin

g

2012 TSX5D-31TL7610.book 34

Airbags

e c

h

m

Airbag System Components

h a k l i h a gj j b

hh

e

h

f

b

d

c

uuAirbagsuAirbag System Components Safe D

rivin g

2012 TSX5D-31TL7610.book 35

The front, front side, and side curtain airbags are deployed according to the direction and severity of impact. The airbag system includes:

aTwo SRS (Supplemental Restraint System) front airbags. The drivers airbag is stored in the center of the steering wheel; the front passengers airbag is stored in the dashboard. Both are marked SRS AIRBAG.

bTwo side airbags, one for the driver and one for a front passenger. The airbags are stored in the outer edges of the seat- backs. Both are marked SIDE AIRBAG.

cTwo side curtain airbags, one for each side of the vehicle. The airbags are stored in the ceiling, above the side windows. The front and rear pillars are marked SIDE CURTAIN AIRBAG.

dAn electronic control unit that continually monitors and records information about the sensors, the airbag activators, the seat belt tensioners, and driver and front passenger seat belt use when the ignition switch is in ON (w .

eAutomatic front seat belt tensioners. The drivers and front passengers seat belts incorporate sensors that detect whether or not they are fastened.

fA drivers seat position sensor. If the seat is too far forward, the airbag will inflate with less force.

gWeight sensors in the front passengers seat. The front passengers airbag will be turned off if the weight on the seat is 65 lbs (29 kg) or less (the weight of an infant or small child).

h Impact sensors that can detect a moderate-to-severe front or side collision.

iAn indicator on the dashboard that alerts you that the front passengers front airbag has been turned off.

jSensors that can detect if a child or small statured adult is in the deployment path of the front passengers side airbag.

kAn indicator on the instrument panel that alerts you to a possible problem with your airbag system or seat belt tensioners.

lAn indicator on the instrument panel that alerts you that the front passengers side airbag has been turned off.

mSafing Sensor

35Continued

uuAirbagsuAirbag System Components

36

Safe D rivin

g

1Important Facts About Your Airbags

Do not attempt to deactivate your airbags. Together, airbags and seat belts provide the best protection.

When driving, keep hands and arms out of the deployment path of the front airbag by holding each side of the steering wheel. Do not cross an arm over the airbag cover.

2012 TSX5D-31TL7610.book 36

Airbags can pose serious hazards. To do their job, airbags must inflate with tremendous force. So, while airbags help save lives, they can cause minor injuries, sometimes even fatal ones if occupants are not wearing their seat belts properly and sitting correctly.

What you should do: Always wear your seat belt properly, and sit upright and as far back from the steering wheel as possible while allowing full control of the vehicle. A front passenger should move their seat as far back from the dashboard as possible.

Remember, however, that no safety system can prevent all injuries or deaths that can occur in a severe crash, even when seat belts are properly worn and the airbags deploy.

Do not place hard or sharp objects between yourself and a front airbag. Carrying hard or sharp objects on your lap, or driving with a pipe or other sharp object in your mouth, can result in injuries if your front airbag inflates.

Do not attach or place objects on the front airbag covers. Objects on the covers marked SRS AIRBAG could interfere with the proper operation of the airbags or be propelled inside the vehicle and hurt someone if the airbags inflate.

Important Facts About Your Airbags

uuAirbagsuTypes of Airbags Safe D

rivin g

1Types of Airbags

The airbags can inflate whenever the ignition switch is in ON (w.

1Front Airbags (SRS)

Dual-Stage, Multiple-Threshold Front Airbags (SRS) Your vehicle is equipped with dual-stage, multiple- threshold front airbags (SRS). During a frontal crash severe enough to cause one or both front airbags to deploy, the airbags can inflate at different rates, depending on the severity of the crash, whether or not the seat belts are latched, and/ or other factors. Frontal airbags are designed to supplement the seat belts to help reduce the likelihood of head and chest injuries in frontal crashes.

2012 TSX5D-31TL7610.book 37

Types of Airbags Your vehicle is equipped with three types of airbags: Front airbags: Airbags in front of the drivers and front passengers seats. Side airbags: Airbags in the drivers and front passengers seat-backs. Side curtain airbags: Airbags above the side windows. Each is discussed in the following pages.

Front Airbags (SRS) The front SRS airbags inflate in a moderate-to-severe frontal collision to help protect the head and chest of the driver and/or front passenger.

SRS (Supplemental Restraint System) indicates that the airbags are designed to supplement seat belts, not replace them. Seat belts are the occupants primary restraint system.

The front airbags are housed in the center of the steering wheel for the driver, and in the dashboard for the front passenger. Both airbags are marked SRS AIRBAG.

Housing Locations

37Continued

uuAirbagsuFront Airbags (SRS)

38

Safe D rivin

g

1How the Front Airbags Work

After a front airbag inflates in a crash, you may see what looks like smoke. This is actually powder from the airbags surface. Although the powder is not harmful, people with respiratory problems may experience some temporary discomfort. If this occurs, get out of the vehicle as soon as it is safe to do so.

Although the drivers and front passengers airbags normally inflate within a split second of each other, it is possible for only one airbag to deploy. This can happen if the severity of a collision is at the margin, or threshold, that determines whether or not the airbags will deploy. In such cases, the seat belt will provide sufficient protection, and the supplemental protection offered by the airbag would be minimal.

2012 TSX5D-31TL7610.book 38

Front airbags are designed to inflate during moderate-to-severe frontal collisions. When the vehicle decelerates suddenly, the sensors send information to the control unit which signals one or both front airbags to inflate.

A frontal collision can be either head-on or angled between two vehicles, or when a vehicle crashes into a stationary object, such as a concrete wall.

While your seat belt restrains your torso, the front airbag provides supplemental protection for your head and chest.

The front airbags deflate immediately so that they wont interfere with the drivers visibility or the ability to steer or operate other controls.

The total time for inflation and deflation is so fast that most occupants are not aware that the airbags deployed until they see them lying in front of them.

Operation

How the Front Airbags Work

uuAirbagsuFront Airbags (SRS) Safe D

rivin g

2012 TSX5D-31TL7610.book 39

When front airbags should not deploy Minor frontal crashes: Front airbags were designed to supplement seat belts and help save lives, not to prevent minor scrapes, or even broken bones that might occur during a less than moderate-to-severe frontal crash. Side impacts: Front airbags can provide protection when a sudden deceleration causes a driver or front passenger to move towards the front of the vehicle. Side airbags and side curtain airbags have been specifically designed to help reduce the severity of injuries that can occur during a moderate-to-severe side impact which can cause the driver or passenger to move towards the side of the vehicle. Rear impacts: Head restraints and seat belts are your best protection during a rear impact. Front airbags cannot provide any significant protection and are not designed to deploy in such collisions. Rollovers: Seat belts, and in vehicles equipped with a rollover sensor, side airbags, and side curtain airbags offer the best protection in a rollover. Because front airbags could provide little if any protection, they are not designed to deploy during a rollover. When front airbags deploy with little or no visible damage Because the airbag system senses sudden deceleration, a strong impact to the vehicle framework or suspension might cause one or more of the airbags to deploy. Examples include running into a curb, the edge of a hole, or other low fixed object that causes a sudden deceleration in the vehicle chassis. Since the impact is underneath the vehicle, damage may not be readily apparent. When front airbags may not deploy, even though exterior damage

appears severe Since crushable body parts absorb crash energy during an impact, the amount of visible damage does not always indicate proper airbag operation. In fact, some collisions can result in severe damage but no airbag deployment because the airbags would not have been needed or would not have provided protection even if they had deployed.

39Continued

uuAirbagsuFront Airbags (SRS)

40

Safe D rivin

g

1Advanced Airbags

If there is a problem with the drivers seat position sensor, the SRS indicator will come on and the airbag will inflate with full (normal) force, regardless of the drivers seating position.

For both advanced front airbags to work properly: Do not spill any liquid on or under the seats. Do not put any object under the passengers seat. Make sure any objects are positioned properly on

the floor. Improperly positioned objects can interfere with the advanced airbag sensors.

All occupants should sit upright and wear their seat belts properly.

Do not place any cover over the passenger side dashboard.

2012 TSX5D-31TL7610.book 40

Your front airbags have advanced features to help reduce the likelihood of airbag related injuries to smaller occupants.

The drivers advanced front airbag system includes a seat position sensor.

If the seat is too far forward, the airbag inflates with less force, regardless of the severity of the impact.

The passengers advanced front airbag system has weight sensors.

Although Acura recommends against carrying an infant or small child in front, if the sensors detect the weight of a child (up to about 65 lbs or 29 kg), the system will automatically turn off the passengers front airbag.

Advanced Airbags

Drivers Seat Position Sensor

Passengers Seat Weight Sensors

uuAirbagsuSide Airbags Safe D

rivin g

1Side Airbags

Do not attach accessories on or near the side airbags. They can interfere with the proper operation of the airbags, or hurt someone if an airbag inflates.

If the impact is on the passenger side, the airbag deploys even if there is no passenger in the passenger seat.

Do not cover or replace the front seat-back covers without consulting a dealer. Improperly replacing or covering front seat-back covers can prevent your side airbags from properly deploying during a side impact.

2012 TSX5D-31TL7610.book 41

Side Airbags The side airbags help protect the upper torso of the driver or a front passenger during a moderate-to-severe side impact.

The side airbags are housed in the outside edge of the drivers and passengers seat- backs.

Both are marked SIDE AIRBAG.

When the sensors detect a moderate-to- severe side impact, the control unit signals the side airbag on the impact side to immediately inflate.

Housing Locations

Housing Location

Operation

When inflated

Side Airbag

41Continued

42

uuAirbagsuSide Airbags

Safe D rivin

g

2012 TSX5D-31TL7610.book 42

When a side airbag deploys with little or no visible damage Because the airbag systems senses sudden acceleration, a strong impact to the side of the vehicles framework can cause a side airbag to deploy. In such cases, there may be little or no damage, but the side impact sensors detected a severe enough impact to deploy the airbag.

When a side airbag may not deploy, even though visible damage appears severe

It is possible for a side airbag to not deploy during an impact that results in apparently severe damage. This can occur when the point of impact was towards the far front or rear of the vehicle, or when the vehicles crushable body parts absorbed most of the crash energy. In either case, the side airbag would not have been needed nor provided protection even if it had deployed.

uuAirbagsuSide Airbags Safe D

rivin g

1Side Airbag Cutoff System

The sensors that monitor the front passengers height and body position may not work if: The seat-back is wet The passenger is touching a metal or other

electrical conductive object A seat cushion is on the seat The passenger is wearing excessively thick clothing

Sensors that monitor the passengers height.

Sensors that monitor the passengers position.

2012 TSX5D-31TL7610.book 43

To reduce the likelihood that a front passenger may be injured by an inflating side airbag, the passenger side airbag is automatically turned off when: The height sensors detect a child or short-statured adult is seated in the front

passenger seat. The position sensor detects that the front passenger is leaning into the

deployment path of the side airbag. When the side airbag cutoff system is activated, the side airbag off indicator comes on.

2 Side Airbag Off Indicator P. 47

If the side airbag off indicator comes on, have the passenger sit upright. A few seconds after the passenger is sitting properly, the side airbag will automatically be turned on, and the indicator will go off.

If the front passenger is a child, stop when it is safe to do so, and have the child sit properly restrained in a rear seat.

Side Airbag Cutoff System

Side Airbag Off Indicator

43

44

uuAirbagsuSide Curtain Airbags

Safe D rivin

g

1Side Curtain Airbags

The side curtain airbags are most effective when an occupant is wearing their seat belt properly and sitting upright, well back in their seat.

Do not attach any objects to the side windows or roof pillars as they can interfere with the proper operation of the side curtain airbags.

2012 TSX5D-31TL7610.book 44

Side Curtain Airbags The side curtain airbags help protect the heads of the driver and passengers in outer seating positions during a moderate-to-severe side impact.

The side curtain airbags are located in the ceiling above the side windows on both sides of the vehicle.

The side curtain airbag is designed to deploy in a moderate-to-severe side impact.

When side curtain airbags deploy in a frontal collision One or both side curtain airbags may inflate in a moderate-to-severe angled frontal collision. In this case, the side curtain airbags will deploy slightly after the front airbags.

Housing Locations

Side Curtain Airbag Storage

Operation

Deployed Side Curtain Airbag

uuAirbagsuAirbag System Indicators Safe D

rivin g

1SRS (Supplemental Restraint System) Indicator

3WARNING Ignoring the SRS indicator can result in serious injury or death if the airbag systems or tensioners do not work properly.

Have your vehicle checked by a dealer as soon as possible if the SRS indicator alerts you to a possible problem.

2012 TSX5D-31TL7610.book 45

Airbag System Indicators If a problem occurs in the airbag system, the SRS indicator will come on and a message appears on the multi-information display.

When the ignition switch is turned to ON (w

The indicator comes on for a few seconds, then goes off. This tells you the system is working properly.

If the indicator comes on at any other time, or does not come on at all, have the system checked by a dealer as soon as possible. If you dont, your airbags and seat belt tensioners may not work properly when they are needed.

SRS (Supplemental Restraint System) Indicator

45Continued

uuAirbagsuAirbag System Indicators

46

Safe D rivin

g

1Passenger Airbag Off Indicator

If the indicator comes on with no front passenger and no objects on the passengers seat, or with an adult riding there, something may be interfering with the weight sensors. Such as:

An object hanging on the seat or in the seat-back pocket.

A child seat or other object pressing against the rear of the seat-back.

A rear passenger pushing or pulling on the back of the front passengers seat.

The front seat or seat-back is forced back against an object on the seat or floor behind it.

An object placed under the front passengers seat.

If none of these conditions exist, have your vehicle checked by a dealer as soon as possible.

The passenger airbag off indicator may come on and goes off repeatedly if the total weight on the seat is near the airbag cutoff threshold.

2012 TSX5D-31TL7610.book 46

When the passenger airbag off indicator comes on

The indicator comes on to alert you that the passengers front airbag has been turned off. This occurs when the weight sensors detect 65 lbs (29 kg) or less, the weight of an infant or small child, on the seat.

Infants and small children should always ride properly restrained in a back seat. 2 Child Safety P. 49

Objects placed on the seat can also cause the indicator to come on.

If the front passenger seat is empty, the passengers front airbag will not deploy and the indicator will not come on.

Passenger Airbag Off Indicator

uuAirbagsuAirbag System Indicators Safe D

rivin g

1Side Airbag Off Indicator

When you turn the ignition switch to ON (w, the indicator should come on for a few seconds and then go out. If it doesnt come on, stays on, or comes on while driving without a passenger in the front seat, have the system checked by a dealer as soon as possible.

2012 TSX5D-31TL7610.book 47

When the side airbag off indicator comes on

This indicator comes on if the passengers side airbag has been turned off because the passenger is too small to be sitting in the front seat, is slouching or not sitting upright, or has leaned into the airbags deployment path.

Unless the passenger is a smaller statured adult or a child, the indicator should go off when the passenger returns to a proper upright sitting position.

Side Airbag Off Indicator

47

48

uuAirbagsuAirbag Care

Safe D rivin

g

1Airbag Care

We recommend against the use of salvaged airbag system components, including the airbag, tensioners, sensors, and control unit.

2012 TSX5D-31TL7610.book 48

Airbag Care You do not need to, and should not, perform any maintenance on or replace any airbag system components yourself. However, you should have your vehicle inspected by a dealer in the following situations:

When the airbags have deployed If an airbag has inflated, the control unit and other related parts must be replaced. Similarly, once an automatic seat belt tensioner has been activated, it must be replaced.

When the vehicle has been in a moderate-to-severe collision Even if the airbags did not inflate, have your dealer inspect the following: the drivers seat position sensor, weight sensors in the passengers seat, front seat belt tensioners, and each seat belt that was worn during the crash.

Do not remove or modify a front seat without consulting a dealer This would likely disable the drivers seat position sensor or the weight sensors in the passengers seat. If it is necessary to remove or modify a front seat to accommodate a person with disabilities, contact an Acura dealer. For U.S. vehicles you can also contact Acura Client Service at 800-382-2238.

2012 TSX5D-31TL7610.book 49

Child Safety

Safe D

rivin g

1Protecting Child Passengers

The National Highway Traffic Safety Administration and Transport Canada recommend that all children age 12 and under be properly restrained in a rear seat. Some states or provinces/ territories have laws restricting where children may ride.

3WARNING Children who are unrestrained or improperly restrained can be seriously injured or killed in a crash.

Any child too small for a seat belt should be properly restrained in a child seat. A larger child should be properly restrained with a seat belt, using a booster seat if necessary.

Protecting Child Passengers Each year, many children are injured or killed in vehicle crashes because they are either unrestrained or not properly restrained. In fact, vehicle accidents are the number one cause of death of children age 12 and under.

To reduce the number of child deaths and injuries, every state, Canadian province and territory requires that infants and children be properly restrained when they ride in a vehicle.

Children should sit properly restrained in a rear seat. This is because: An inflating front or side airbag can injure

or kill a child sitting in the front seat.

A child in the front seat is more likely to interfere with the drivers ability to safely control the vehicle.

Statistics show that children of all sizes and ages are safer when they are properly restrained in a rear seat.

49Continued

uuChild SafetyuProtecting Child Passengers

50

Safe D rivin

g

1Protecting Child Passengers

To deactivate a lockable retractor, release the buckle and allow the seat belt to wind up all the way.

To remind you of the passengers front airbag hazards and child safety, your vehicle has warning labels on the dashboard and on the front visors. Please read and follow the instructions on these labels.

2 Safety Labels P. 62

3WARNING Allowing a child to play with a seat belt or wrap one around their neck can result in serious injury or death.

Instruct children not to play with any seat belt and make sure any unused seat belt a child can reach is buckled, fully retracted, and locked.

2012 TSX5D-31TL7610.book 50

Any child who is too small to wear a seat belt correctly must be restrained in an approved child seat that is properly secured to the vehicle using either the lap belt portion of the lap/shoulder belt or the lower anchors of the LATCH system.

Never hold a child on your lap because it is impossible to protect them in the event of a collision.

Never put a seat belt over yourself and a child. During a crash, the belt would likely press deep into the child and cause serious or fatal injuries.

Never let two children use the same seat belt. Both children could be very seriously injured in a crash.

Do not allow children to operate the doors, windows or seat adjustments.

Do not leave children in the vehicle unattended, especially in hot weather when the inside of the vehicle can get hot enough to kill them. They could also activate vehicle controls causing it to move unexpectedly.

uuChild SafetyuSafety of Infants and Small Children Safe D

rivin g

1Protecting Infants

Rear-facing child seats should never be installed in a forward facing position.

Always refer to the child seat manufacturers instructions before installation.

3WARNING Placing a rear-facing child seat in the front seat can result in serious injury or death during a crash.

Always place a rear-facing child seat in the rear seat, not the front.

2012 TSX5D-31TL7610.book 51

Safety of Infants and Small Children

An infant must be properly restrained in a rear-facing, reclining child seat until the infant reaches the seat makers weight or height limit for the seat, and the infant is at least one year old.

Positioning a rear-facing child seat Child seats must be placed and secured in a rear seating position.

When properly installed, a rear-facing child seat may prevent the driver or a front passenger from moving their seat all the way back, or from locking their seat-back in the desired position.

It can also interfere with proper operation of the passengers advanced front airbag system.

2 Airbags P. 34

If this occurs, we recommend that you install the child seat directly behind the front passengers seat, move the seat as far forward as needed, and leave it unoccupied. Or, you may wish to get a smaller rear-facing child seat.

Protecting Infants

51Continued

uuChild SafetyuSafety of Infants and Small Children

52

Safe D rivin

g

1Protecting Smaller Children

Educate yourself about the laws and regulations regarding child seat use where you are driving, and follow the child seat manufacturers instructions.

Many experts recommend use of a rear-facing seat up to age two, if the childs height and weight are appropriate for a rear-facing seat.

3WARNING Placing a forward-facing child seat in the front seat can result in serious injury or death if the front airbag inflates.

If you must place a forward-facing child seat in front, move the vehicle seat as far back as possible, and properly restrain the child.

2012 TSX5D-31TL7610.book 52

If a child is at least one year old and within the weight range indicated by the child seat manufacturer, the child should be properly restrained in a firmly secured forward-facing child seat.

Forward-facing child seat placement We strongly recommend placing a forward- facing child seat in a rear seating position.

Placing a forward-facing child seat in the front seat can be hazardous, even with advanced front airbags that automatically turn the passengers front airbag off. A rear seat is the safest place for a child.

Protecting Smaller Children

uuChild SafetyuSafety of Infants and Small Children Safe D

rivin g

1Selecting a Child Seat

Installation of a LATCH-compatible child seat is simple.

LATCH-compatible child seats have been developed to simplify the installation process and reduce the likelihood of injuries caused by incorrect installation.

2012 TSX5D-31TL7610.book 53

Most child seats are LATCH-compatible (Lower Anchors and Tethers for CHildren). Some have a rigid-type connector, while others have a flexible-type connector. Both are equally easy to use. Some existing and previously owned child seats can only be installed using the seat belt. Whichever type you choose, follow the child seat manufacturers use and care instructions as well as the instructions in this manual. Proper installation is key to maximizing your childs safety.

In seating positions and vehicles not equipped with LATCH, a LATCH compatible child seat can be installed using the seat belt and a top tether for added security. This is because all child seats are required to be designed so that they can be secured with a lap belt or the lap part of a lap/shoulder belt. In addition, the child seat manufacturer may advise that a seat belt be used to attach a LATCH-compatible seat once a child reaches a specified weight. Please read the child seat owners manual for proper installation instructions.

Important consideration when selecting a child seat Make sure the child seat meets the following three requirements: The child seat is the correct type and size for the child. The child seat is the correct type for the seating position. The child seat is compliant with Federal Motor Vehicle Safety Standard 213.

Selecting a Child Seat

Continued 53

54

uuChild SafetyuSafety of Infants and Small Children

Safe D rivin

g

2012 TSX5D-31TL7610.book 54

A LATCH-compatible child seat can be installed in either of the two outer rear seats. A child seat is attached to the lower anchors with either the rigid or flexible type of connectors.

1. Locate the lower anchors under the marks.

2. Place the child seat on the vehicle seat then attach the child seat to the lower anchors according to the instructions that came with the child seat. u When installing the child seat, make sure

that the lower anchors are not obstructed by the seat belt or any other object.

Installing a LATCH-Compatible Child Seat

Marks

Rigid Type

Lower Anchors

uuChild SafetyuSafety of Infants and Small Children Safe D

rivin g

1Installing a LATCH-Compatible Child Seat

For your childs safety, when using a child seat installed using the LATCH system, make sure that the seat is properly secured to the vehicle. A child seat that is not properly secured will not adequately protect a child in a crash and may cause injury to the child or other vehicle occupants.

2012 TSX5D-31TL7610.book 55

3. Release the head restraint, then route the tether strap between the head restraint legs, and secure the tether strap hook onto the anchor.

4. Tighten the tether strap as instructed by the child seat maker.

5. Make sure the child seat is firmly secured by rocking it forward and back and side to side; little movement should be felt.

6. Make sure any unused seat belt that a child can reach is buckled, the lockable retractor is activated, and the belt is fully retracted and locked.

Flexible Type

Tether Strap Hook

Anchor

Continued 55

56

uuChild SafetyuSafety of Infants and Small Children

Safe D rivin

g

2012 TSX5D-31TL7610.book 56

1. Place the child seat on the vehicle seat. 2. Route the seat belt through the child seat

according to the seat maker's instructions, and insert the latch plate into the buckle. u Insert the latch plate fully until it clicks.

3. Slowly pull the shoulder part of the belt all the way out until it stops. This activates the lockable retractor.

4. Let the seat belt completely wind up into the retractor, then try to pull it out to make sure the retractor is locked. u If you are able to pull the shoulder belt

out, the lockable retractor is not activated. Pull the seat belt all the way out, and repeat steps 2 4.

5. Grab the shoulder part of the seat belt near the buckle, and pull up to remove any slack from the lap part of the belt. u When doing this, place your weight on

the child seat and push it into the vehicle seat.

Installing a Child Seat with a Lap/Shoulder Seat Belt

uuChild SafetyuSafety of Infants and Small Children Safe D

rivin g

1Installing a Child Seat with a Lap/Shoulder Seat Belt

A child seat that is not properly secured will not adequately protect a child in a crash and may cause injury to the child or other vehicle occupants.

To deactivate a lockable retractor, release the buckle and allow the seat belt to wind up all the way.

1Adding Security with a Tether

Since a tether can provide additional security to the lap/shoulder seat belt installation, we recommend using a tether whenever one is available.

2012 TSX5D-31TL7610.book 57

6. Make sure the child seat is firmly secured by rocking it forward and back and side to side; little movement should be felt.

7. Make sure any unused seat belt that a child can reach is buckled, the lockable retractor is activated, and the belt is fully retracted and locked.

Two tether anchorage points are provided behind the rear outer seating positions and one in the ceiling for the rear center. A child seat that is installed with a seat belt and comes with a tether can use the tether for additional security.

Adding Security with a Tether

Anchor Fitting

Tether Anchorage Points

Continued 57

58

uuChild SafetyuSafety of Infants and Small Children

Safe D rivin

g

2012 TSX5D-31TL7610.book 58

Using an outer anchor 1. Raise the head restraint to its highest

position, then route the tether strap through the head restraint legs. Make sure the strap is not twisted.

2. Secure the tether strap hook onto the anchor.

3. Tighten the tether strap as instructed by the child seat manufacturer.

Using the center anchor 1. Lower the head restraint to its lowest

position. 2. Open the anchor cover. 3. Route the tether strap over the head

restraint. Make sure the strap is not twisted.

4. Secure the tether strap hook onto the anchor.

5. Tighten the tether strap as instructed by the child seat manufacturer.

Tether Strap Hook

Anchor

Tether Strap Hook

Anchor

uuChild SafetyuSafety of Larger Children Safe D

rivin g

1Safety of Larger Children

3WARNING Allowing a child age 12 or under to sit in front can result in serious injury or death if the passengers front airbag inflates.

If a larger child must ride in front, move the vehicle seat as far to the rear as possible, have the child sit up properly and wear the seat belt properly, using a booster seat if needed.

2012 TSX5D-31TL7610.book 59

Safety of Larger Children

The following pages give instructions on how to check proper seat belt fit, what kind of booster seat to use if one is needed, and important precautions for a child who must sit in front.

When a child is too big for a child seat, secure the child in a rear seat using the lap/ shoulder seat belt. Have the child sit upright and all the way back, then answer the following questions.

Checklist Do the childs knees bend comfortably over

the edge of the seat? Does the shoulder belt cross between the

childs neck and arm? Is the lap part of the seat belt as low as

possible, touching the childs thighs? Will the child be able to stay seated like this

for the whole trip? If you answer yes to all these questions, the child is ready to wear the lap/shoulder seat belt correctly. If you answer no to any question, the child needs to ride on a booster seat until the seat belt fits properly without a booster seat.

Protecting Larger Children

Checking Seat Belt Fit

59Continued

uuChild SafetyuSafety of Larger Children

60

Safe D rivin

g

1Booster Seats

When installing a booster seat, make sure to read the instructions that came with it, and install the seat accordingly. There are high- and low-type booster seats. Choose a booster seat that allows the child to wear the seat belt correctly.

Some U.S. states and Canadian provinces, and territories require children to use a booster seat until they reach a given age or weight (e.g. 6 years or 60 lbs). Be sure to check current laws in the state or province, or territory where you intend to drive.

2012 TSX5D-31TL7610.book 60

If a lap/shoulder seat belt cannot be used properly, position the child in a booster seat in a rear seating position. For the childs safety, check that the child meets the booster seat manufacturers recommendations.

Your vehicle has a rear seat where children can be properly restrained. If you ever have to carry a group of children, and a child must ride in front: Make sure you read and fully understand the instructions and safety information

in this manual. Move the front passenger seat as far back as possible. Have the child sit upright and well back in the seat. Check that the seat belt is properly positioned so that the child is secure in the

seat.

Monitoring child passengers We strongly recommend that you keep an eye on child passengers. Even older, more mature children sometimes need to be reminded to fasten their seat belts and sit up properly.

Booster Seats

Protecting Larger Children - Final Checks

2012 TSX5D-31TL7610.book 61

Exhaust Gas Hazard

Safe D

rivin g

1Carbon Monoxide Gas

An enclosed area such as a garage can quickly fill up with carbon monoxide gas. Do not run the engine with the garage door closed. Even when the garage door is open, drive out of the garage immediately after starting the engine.

3WARNING Carbon monoxide gas is toxic. Breathing it can cause unconsciousness and even kill you.

Avoid any enclosed areas or activities that expose you to carbon monoxide.

Carbon Monoxide Gas The engine exhaust from this vehicle contains carbon monoxide, a colorless, odorless, and highly toxic gas. As long as you properly maintain your vehicle, carbon monoxide gas will not get into the interior.

Have the exhaust system inspected for leaks whenever The exhaust system is making an unusual noise. The exhaust system may have been damaged. The vehicle is raised for an oil change.

When you operate a vehicle with the tailgate open, airflow can pull exhaust gas into the interior and create a hazardous condition. If you must drive with the tailgate open, open all the windows and set the climate control system as shown below.

1. Select the fresh air mode.

2. Select the mode. 3. Set the fan speed to high. 4. Set the temperature control to a comfortable setting.

Adjust the climate control system in the same manner if you sit in your parked vehicle with the engine running.

61

62

Safe D rivin

g

2012 TSX5D-31TL7610.book 62

Safety Labels

Label Locations These labels are in the locations shown. They warn you of potential hazards that can cause serious injury or death. Read these labels

carefully.

If a label comes off or becomes hard to read (except for the dashboard label which may be removed by the owner), contact a dealer for a replacement.

Sun Visor

Radiator Cap

Doorjambs

Dashboard

2012 TSX5D-31TL7610.book 63

Instrument Panel

This chapter describes the buttons, indicators, and gauges that are used while driving.

Indicators ............................................ 64 Multi-Information Display Warning and Information Messages...................... 72

Gauges and Multi-Information Display Gauges.............................................. 74 Multi-Information Display .................. 75

63

64

In stru

m en

t Pan el

2012 TSX5D-31TL7610.book 64

Indicators

Indicator Name On/Blinking Explanation Message

Parking Brake and Brake System Indicator

Comes on for a few seconds when you turn the ignition switch to ON (w, then goes off.

Comes on when the parking brake is applied, and goes off when it is released.

Come on when the brake fluid level is low.

Comes on if there is a problem with the brake system.

The beeper sounds and the indicator comes on if you drive with the parking brake not fully released.

Comes on while driving - Make sure the parking brake is released. Check the brake fluid level.

2 What to do when the indicator comes on while driving P. 292

Comes on along with the ABS indicator - Have the vehicle checked by a dealer.

2 If the Brake System Indicator Comes On P. 292

Low Oil Pressure Indicator

Comes on when you turn the ignition switch to ON (w , and goes off when the engine starts.

Comes on when the engine oil pressure is low.

Comes on while driving - Immediately stop in a safe place.

2 If the Low Oil Pressure Indicator Comes On P. 290

Shift Position Indicator

Indicates the current shift lever position.

2 Shifting P. 203

uuIndicatorsu In

stru m

en t Pan

el

2012 TSX5D-31TL7610.book 65

Indicator Name On/Blinking Explanation Message

Malfunction Indicator Lamp

Comes on when you turn the ignition switch to ON (w, and goes off either when the engine starts or after several seconds if the engine is not started. If readiness codes have not been set, it blinks five times before it goes off.

Comes on if there is a problem with the emissions control system.

Blinks when a misfire in the engines cylinders is detected.

Readiness codes are part of the on board diagnostics for the emissions control systems.

2 Testing of Readiness Codes P. 309 Comes on while driving - Have the

vehicle checked by a dealer. Blinks while driving - Stop in a safe

place where there are no flammable objects. Stop the engine for 10 minutes or more, and wait for it to cool down. Then, take the vehicle to a dealer.

2 If the Malfunction Indicator Lamp Comes On or Blinks P. 291

Charging System Indicator

Comes on when you turn the ignition switch to ON (w, and goes off when the engine starts.

Comes on when the battery is not charging.

Comes on while driving - Turn off the climate control system and rear defogger in order to reduce electricity consumption.

2 If the Charging System Indicator Comes On P. 290

Transmission Indicator

Comes on for a few seconds when you turn the ignition switch to ON (w , then goes off.

Blinks if the transmission system has a problem.

Blinks while driving - Avoid sudden starts and acceleration and have the vehicle checked by a dealer immediately.

65Continued

66

uu Indicatorsu

In stru

m en

t Pan el

2012 TSX5D-31TL7610.book 66

Indicator Name On/Blinking Explanation Message

M (sequential shift mode) Indicator/ Gear Position Indicator

Comes on when the manual sequential shift mode is applied.

Blinks if the transmission system has a problem.

2 Sequential Shift Mode P. 205

Seat Belt Reminder Indicator

Comes on and the beeper sounds if you are not wearing a seat belt when you turn the ignition switch to ON (w . If the front passenger is not wearing a seat belt, the indicator comes on about a few seconds later.

Blinks while driving if either you or the front passenger has not fastened a seat belt. The beeper sounds and the indicator blinks at regular intervals.

The beeper stops and the indicator goes off when you and the front passenger fasten their seat belts.

Stays on after you or the front passenger has fastened the seat belt - A detection error may have occurred in the sensor. Have the vehicle checked by a dealer.

2 Seat Belt Reminder P. 27

Low Fuel Indicator

Comes on when the fuel reserve is running low (approximately 2.8 U.S. gal./10.5 Liter left).

Blinks if there is a problem with the fuel gauge.

Comes on - Refuel your vehicle as soon as possible.

Blinks - Have the vehicle checked by a dealer.

ABS (Anti-lock Brake System) Indicator

Comes on for a few seconds when you turn the ignition switch to ON (w, then goes off.

If it comes on at any other time, there is a problem with the ABS.

Stays on constantly - Have the vehicle checked by a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function.

2 ABS (Anti-lock Brake System) P. 218

Indicator

uuIndicatorsu In

stru m

en t Pan

el

2012 TSX5D-31TL7610.book 67

Indicator Name On/Blinking Explanation Message

Supplemental Restraint System Indicator

Comes on for a few seconds when you turn the ignition switch to ON (w , then goes off.

Comes on if a problem with any of the following is detected: - Supplemental restraint system - Side airbag system - Side curtain airbag system - Seat belt tensioner

Stays on constantly or does not come on at all - Have the vehicle checked by a dealer.

VSA (Vehicle Stability Assist) System Indicator

Comes on for a few seconds when you turn the ignition switch to ON (w , then goes off.

Blinks when VSA is active. Comes on if there is a problem

with the VSA system.

Stays on constantly - Have the vehicle checked by a dealer.

2 VSA (Vehicle Stability Assist), aka ESC (Electronic Stability Control), System P. 210

VSA (Vehicle Stability Assist) OFF Indicator

Comes on for a few seconds when you turn the ignition switch to ON (w , then goes off.

Comes on when you deactivate VSA.

2 VSA On and Off P. 211

67Continued

68

uu Indicatorsu

In stru

m en

t Pan el

2012 TSX5D-31TL7610.book 68

Indicator Name On/Blinking Explanation Message

Door and Tailgate Open Indicator

Comes on for a few seconds if you turn the ignition switch to ON (w , then goes off.

Comes on if the tailgate or any door is not completely closed.

Goes off if a door or the tailgate is closed.

EPS (Electric Power Steering System) Indicator

Comes on when you turn the ignition switch to ON (w , and goes off when the engine starts.

Comes on if there is a problem with the EPS (Electric Power Steering System).

Stays on constantly or does not come on at all - Have the vehicle checked by a dealer.

2 If the EPS Indicator Comes On P. 292

Low Tire Pressure/ TPMS Indicator

Comes on for a few seconds when you turn the ignition switch to ON (w.

Comes on if the tire pressure of any of the tires becomes significantly low.

Blinks for about one minute, and then stays on if there is a problem with the TPMS.

Comes on while driving - Stop in a safe place, check tire pressures, and inflate the tire(s) if necessary.

Blinks and remains on - Have the vehicle checked by a dealer.

uuIndicatorsu In

stru m

en t Pan

el

2012 TSX5D-31TL7610.book 69

Indicator Name On/Blinking Explanation Message

System Message Indicator

Comes on along with a beep when a problem is detected. A system message on the multi-information display appears at the same time.

While the indicator is on, press the (information) button to see the

message again. Refer to the Indicators information in this

chapter when a system message appears on the multi-information display. Take the appropriate action for the message.

The multi-information display does not return to the normal screen unless the warning is canceled, or the button is pressed.

Turn Signal Indicators

The turn signal indicators blink when you operate the turn signal lever.

If you press the hazard warning button, both indicators and all turn signals blink at the same time.

Does not blink or blinks rapidly - A turn signal light bulb has blown. Change the bulb immediately.

2 Replacing Light Bulbs P. 249, 251

High Beam Indicator

Comes on when the high beam headlights are on.

Comes on with reduced brightness when DRL (daytime running lights) are on.

Lights On Indicator Comes on whenever the light

switch is on, or in AUTO when the exterior lights are on.

If you remove the key from the ignition switch while the lights are on, a chime sounds when the drivers door is opened.

69Continued

70

uu Indicatorsu

In stru

m en

t Pan el

2012 TSX5D-31TL7610.book 70

Indicator Name On/Blinking Explanation Message

Fog Light Indicator Comes on when the fog lights are

on.

Side Airbag Off Indicator

Comes on for a few seconds when you turn the ignition switch to ON (w, then goes off.

Comes on when the passenger side airbag system is automatically shut off.

It does not mean there is a problem with your side airbags.

Comes on when nobody is sitting in the passenger seat - Have the vehicle checked by a dealer.

Comes on when someone is sitting in the seat - Have the passenger sit properly.

Immobilizer System Indicator

Comes on briefly when you turn the ignition switch to ON (w , then goes off.

Comes on if the immobilizer system cannot recognize the key information.

Blinks - You cannot start the engine. Turn the ignition switch to LOCK (0 , pull the key out, and then insert the key and turn it to ON (w again.

Repeatedly blinks - The system may be malfunctioning. Have the vehicle checked by a dealer.

Do not attempt to alter this system or add other devices to it. Electrical problems can occur.

uuIndicatorsu In

stru m

en t Pan

el

2012 TSX5D-31TL7610.book 71

Indicator Name On/Blinking Explanation Message

Security System Alarm Indicator

Blinks when the security system alarm has been set. 2 Security System Alarm P. 99

CRUISE MAIN Indicator

Comes on when you press the CRUISE button. 2 Cruise Control P. 207

CRUISE CONTROL Indicator

Comes on if you have set a speed for cruise control. 2 Cruise Control P. 207

Indicator

71

72

uu IndicatorsuMulti-Information Display Warning and Information Messages

In stru

m en

t Pan el

2012 TSX5D-31TL7610.book 72

Multi-Information Display Warning and Information Messages The following messages appear only on the multi-information display. Press the (information) button to see the message again

with the system message indicator on.

Message Condition Explanation

Appears when the engine coolant temperature gets abnormally high.

2 Overheating P. 288

Appears when the fuel fill cap is loose or is not installed.

2 Tighten Fuel Fill Cap Message P. 291

Appears if there is a problem with the DRL system. Have your vehicle checked by a dealer. 2 Daytime Running Lights P. 108

Appears when the scheduled maintenance is due soon.

Consequently, SERVICE DUE NOW and SERVICE PAST DUE follow.

2 Maintenance Minder Messages on the Multi- Information Display P. 232

uuIndicatorsuMulti-Information Display Warning and Information Messages In

stru m

en t Pan

el

2012 TSX5D-31TL7610.book 73

Message Condition Explanation

Appears when you open the drivers door while the ignition key is in ACCESSORY (q.

Turn the ignition switch to LOCK (0 , then remove the key.

Appears when the ignition key is turned to ACCESSORY (q from ON (w. (The drivers door is closed.)

Appears when you open the drivers door while the ignition key is in LOCK (0 .

Remove the key from the ignition switch.

Appears when there is a problem with the power tailgate system.

Manually open or close the power tailgate. Have the vehicle checked by a dealer.

Model with power tailgate

73

74

In stru

m en

t Pan el

2012 TSX5D-31TL7610.book 74

Gauges and Multi-Information Display

1Fuel Gauge

NOTICE You should refuel when the reading approaches . Running out of fuel can cause the engine to misfire, damaging the catalytic converter.

The actual amount of remaining fuel may differ from the fuel gauge reading.

E

1Temperature Gauge

NOTICE Driving with the temperature gauge pointer in the upper zone can cause serious engine damage. Pull safely to the side of the road and allow engine temperature to return to normal.

2 Overheating P. 288

Gauges Gauges include the speedometer, tachometer, fuel gauge, and temperature gauge. They are displayed when the ignition switch is in ON (w .

Displays your driving speed in mph.

Displays the amount of fuel left in the fuel tank.

Displays the temperature of the engine coolant.

Shows the number of engine revolutions per minute.

Speedometer

Fuel Gauge

Temperature Gauge

Tachometer

uuGauges and Multi-Information DisplayuMulti-Information Display In

stru m

en t Pan

el

Tire Pressure for each tire

HFL*

er

: Press the SEL/RESET button. : Press the button.

Shown when Bluetooth HandsFreeLink is activated.

2012 TSX5D-31TL7610.book 75

Multi-Information Display The multi-information display shows the odometer, trip meter, outside temperature indicator, and other gauges. It also displays important messages such as warnings and other helpful information.

Press the (information) button or the SEL/RESET button to change the display.

Switching the Display

SEL/RESET Button

Trip Comput

Trip BEngine Oil Life Trip A

Outside TemperatureOdometer

Button

75Continued* Not available on all models

uuGauges and Multi-Information DisplayuMulti-Information Display

76

In stru

m en

t Pan el

1Trip Meter

Switch between trip meter A and trip meter B by pressing the SEL/RESET button.

2012 TSX5D-31TL7610.book 76

Shows the total number of miles that your vehicle has accumulated.

Shows the total number of miles driven since the last reset. Meters A and B can be used to measure 2 separate trips.

Resetting a trip meter To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip meter is reset to 0.0.

Odometer

Trip Meter

uuGauges and Multi-Information DisplayuMulti-Information Display In

stru m

en t Pan

el

1Outside Temperature

The temperature sensor is in the front bumper. Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h).

It may take several minutes for the display to be updated after the temperature reading has stabilized.

Use the multi-information displays customized features to correct the temperature.

2 Customized Features P. 79

1Average Fuel Economy

You can choose to reset either Trip A or average fuel economy A when you refuel.

2 Customized Features P. 79

2012 TSX5D-31TL7610.book 77

Shows the outside temperature in Fahrenheit.

Adjusting the outside temperature display Adjust the temperature reading up to 5F if the temperature reading seems incorrect.

Shows the instant fuel economy as a bar graph in mpg.

Shows the estimated average fuel economy of each trip meter in mpg. The display is updated at set intervals. When a trip meter is reset, the average fuel economy is also reset.

Shows the estimated distance you can travel on the fuel remaining. This distance is estimated from the fuel economy of your trips in the past.

Outside Temperature

Instant Fuel Economy

Average Fuel Economy

Range

Continued 77

uuGauges and Multi-Information DisplayuMulti-Information Display

78

In stru

m en

t Pan el

1Elapsed Time

You can change the elapsed time reset criteria. 2 Customized Features P. 79

2012 TSX5D-31TL7610.book 78

The elapsed time display shows the time during one drive cycle.

The display shows the average speed in mph since the last time Trip A was reset.

Shows the remaining oil life and Maintenance MinderTM. 2 Maintenance MinderTM P. 231

Shows each tires pressure. 2 TPMS (Tire Pressure Monitoring System) P. 212

Shows your paired cell phones information. 2 Bluetooth HandsFreeLink P. 175

Elapsed Time

Average Speed

Engine Oil Life

Tire Pressure Monitor

Bluetooth HandsFreeLink

uuGauges and Multi-Information DisplayuMulti-Information Display In

stru m

en t Pan

el

1Customized Features

To customize other features, press the button.

2 List of customizable options P. 81 2 Example for customization settings P. 83

Customization is possible when you see the drivers ID (DRIVER 1 or DRIVER 2) on the CHG setting screen. The drivers ID indicates which remote transmitter you have used to unlock the drivers door. The customized settings are recalled every time you unlock the drivers door with that remote.

When you customize settings: Shift to (P

The power tailgate customized setting applies to both drivers IDs. It is not possible to have a different setting for each remote transmitter.

Model with power tailgate

2012 TSX5D-31TL7610.book 79

Use the multi-information display to customize certain features.

How to customize Press and hold the button for a few seconds while the ignition switch is in ON (w .

Customized Features

Button: Changes the customize menus and items

Multi-Information Display: Goes to customize settings.

SEL/RESET button: Enters the selected item

Continued 79

80

uuGauges and Multi-Information DisplayuMulti-Information Display

In stru

m en

t Pan el

2012 TSX5D-31TL7610.book 80

Customization flow

CHG SETTING

Press and hold the button.

DEFAULT ALL

EXIT

METER SETUP

POSITION SETUP

LIGHTING SETUP

DOOR SETUP

ADJUST OUTSIDE TEMP. DISPLAY

LANGUAGE SELECTION

ELAPSED TIME RESET

TRIP A RESET with REFUEL

MEMORY POSITION LINK

INTERIOR LIGHT DIMMING TIME

AUTO LIGHT SENSITIVITY

HEADLIGHT AUTO OFF TIMER

AUTO DOOR LOCK

SECURITY RELOCK TIMER

AUTO DOOR UNLOCK

DOOR LOCK MODE

POWER TAILGATE KEYLESS OPEN MODE*

SEL/RESET

EXIT

SEL/RESET

SEL/RESET

SEL/RESET

SEL/RESET

KEYLESS LOCK ACKNOWLEDGMENT

SEL/RESET

* Not available on all models

uuGauges and Multi-Information DisplayuMulti-Information Display In

stru m

en t Pan

el

2012 TSX5D-31TL7610.book 81

List of customizable options

*1: Default Setting

Setup Group Customizable Features Description Selectable settings

METER SETUP

LANGUAGE SELECTION Changes the displayed language. ENGLISH*1/FRENCH/SPANISH

ADJUST OUTSIDE TEMP. DISPLAY

Adjusts the temperature reading by a few degrees. -5F ~ 0F*1 ~ +5F

TRIP A RESET with REFUEL Sets Trip A and the average fuel economy to reset when you refuel.

ON/OFF*1

ELAPSED TIME RESET Changes the resetting conditions of the elapsed time.

IGN OFF*1/TRIP A/TRIP B

POSITION SETUP

MEMORY POSITION LINK Changes the drivers seat position to a stored setting.

ON*1/OFF

LIGHTING SETUP

INTERIOR LIGHT DIMMING TIME

Changes the length of time the interior lights stay on after you close the doors.

60sec/30sec*1/15sec

HEADLIGHT AUTO OFF TIMER

Changes the length of time the exterior lights stay on after you close the drivers door.

60sec/30sec/15sec*1/0sec

AUTO LIGHT SENSITIVITY Changes the timing for the headlights to come on. MAX/HIGH/MID*1/LOW/MIN

81Continued

82

uuGauges and Multi-Information DisplayuMulti-Information Display

In stru

m en

t Pan el

Selectable settings

c locking OFF/ WITH VEH SPD*1/ SHIFT FROM (P

ors and the

OFF/DRIVER DOOR With SHIFT to (P *1/ ALL DOORS With SHIFT to (P / DRIVER DOOR With IGN OFF/ ALL DOORS With IGN OFF

doors and the the remote.

DRIVER DOOR*1/ALL DOORS

power tailgate ANYTIME*1/WHEN UNLOCKED

sh LOCK (2nd ON*1/OFF

rs and the em to set after ng any door

90sec/60sec/30sec*1

gs as default. SET/CANCEL

2012 TSX5D-31TL7610.book 82

*1: Default Setting

Setup Group Customizable Features Description

DOOR SETUP

AUTO DOOR LOCK Changes the setting for the automati feature.

AUTO DOOR UNLOCK Changes the setting for when the do tailgate unlock automatically.

DOOR LOCK MODE Sets up either the drivers door or all tailgate to unlock on the first push of

POWER TAILGATE KEYLESS OPEN MODE*

Changes the setting for whether the opens when it is locked or unlocked.

KEYLESS LOCK ACKNOWLEDGMENT

LOCK/UNLOCK - The exterior lights fla push) - The beeper sounds

SECURITY RELOCK TIMER

Changes the time it takes for the doo tailgate to relock and the security syst you unlock the vehicle without openi and the tailgate.

DEFAULT ALL Sets/Cancels all the customized settin

* Not available on all models

uuGauges and Multi-Information DisplayuMulti-Information Display In

stru m

en t Pan

el

2012 TSX5D-31TL7610.book 83

Example for customization settings The steps for changing the TRIP A RESET with REFUEL setting to ON are shown below. The default setting for TRIP A RESET with REFUEL is OFF.

1. Press and hold button until CHG SETTING appears on the display.

2. Press the SEL/RESET button to go into the METER SETUP group.

3. Press the SEL/RESET button again. u LANGUAGE SELECTION appears first in

the display.

83Continued

84

uuGauges and Multi-Information DisplayuMulti-Information Display

In stru

m en

t Pan el

2012 TSX5D-31TL7610.book 84

4. Press the button until TRIP A RESET with REFUEL appears on the display, then press the SEL/RESET button. u The display switches to the

Customization setup screen, where you can select ON, OFF, or EXIT.

5. Press the button and select ON, then press the SEL/RESET button. u The ON setup screen appears, then the

display returns to the Customization menu screen.

6. Press the button until EXIT appears in the display, then press the SEL/ RESET button.

7. Repeat step 6 until you return to the normal screen.

2012 TSX5D-31TL7610.book 85

Controls

This chapter explains how to operate the various controls necessary for driving.

Setting the Clock ................................ 86 Locking and Unlocking the Doors

Key Types and Functions .................... 87 Locking/Unlocking the Doors from the Outside ............................................ 89

Locking/Unlocking the Doors from the Inside ............................................... 91

Childproof Door Locks ....................... 92 Auto Door Lock/Unlock...................... 92

Opening and Closing the Tailgate..... 93 Security System .................................. 99

Immobilizer System ............................ 99 Security System Alarm........................ 99

Opening and Closing the Windows ...101

Opening and Closing the Moonroof..104 Operating the Switches Around the Steering Wheel Ignition Switch................................. 105 Turn Signals ..................................... 106 Light Switches.................................. 106 Fog Lights ........................................ 108 Daytime Running Lights ................... 108 Wipers and Washers ........................ 109 Brightness Control ........................... 111 Rear Defogger/Heated Door Mirror Button........................................ 112

Driving Position Memory System ...... 113 Adjusting the Steering Wheel........... 115

Adjusting the Mirror ........................ 116 Interior Rearview Mirror ................... 116 Power Door Mirrors ......................... 116

Adjusting the Seats .......................... 118 Adjusting the Seat Positions............. 118

Interior Lights/Interior Convenience Items ................................................ 127 Interior Lights .................................. 127 Interior Convenience Items .............. 129

Climate Control System ................... 140 Using Automatic Climate Control .... 140 Automatic Climate Control Sensors... 143

85

86

C o

n tro

ls

2012 TSX5D-31TL7610.book 86

Setting the Clock

1Clock

You can switch the clock display between 24 hours and 12 hours when in the menu mode.

Selector Knob Icon details Rotate to select. Press to enter.

To set the time to the nearest hour: Press and hold the CLOCK button until the clock display begins to blink, then press the (3 (Reset) button.

Depending on the displayed time, the clock sets forward or backward. Example: 1:06 will reset to 1:00 1:53 will reset to 2:00

The clock is automatically updated through the navigation system, so the time does not need to be adjusted.

Models with navigation system

Clock

You can adjust the time in the clock display, using the CLOCK button.

1. Press the MENU button. 2. Rotate to select CLOCK ADJUST in the

display. 3. Press . CLOCK ADJUST appears. 4. Rotate to select the item you want to

adjust (12/24 hour mode, hour, minute). Then press .

5. Rotate to make the adjustment.

6. Press to enter your selection. The display returns to CLOCK ADJUST. Repeat steps 4 to 6 to adjust other items.

7. To enter the selection, Rotate and select SET, then press .

8. Press the MENU button to go back to the normal display.

Adjusting the Time

Models without navigation system

Menu Button

12/24 Hour Mode

Hour Setting Minute Setting

2012 TSX5D-31TL7610.book 87

Locking and Unlocking the Doors

C

o n

tro ls

1Key Types and Functions

All of the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft.

2 Immobilizer System P. 99

The keys contain precision electronics. Adhere to the following advice to prevent damage to the electronics: Do not leave the keys in direct sunlight, or in

locations with high temperature or high humidity. Do not drop the keys or set heavy objects on them. Keep the keys away from liquids. Do not take the keys apart except for replacing the

battery. If the circuits in the keys are damaged, the engine may not start, and the remote transmitter may not work. If the keys do not work properly, have them inspected by a dealer.

If the key is not fully extended, the immobilizer system may not work properly, and the engine may not start.

Avoid contact with the key whenever it extends or retracts.

Key Types and Functions This vehicle comes with the following keys:

Use the keys to start and stop the engine, and to lock and unlock all the doors, tailgate, and fuel fill door. You can also use the remote transmitter to lock and unlock the doors, tailgate, and fuel fill door.

The seat automatically moves to the preset position when you unlock the door using the remote transmitter on the master key.

2 Driving Position Memory System P. 113

The master key folds up inside the remote transmitter. 1. Press the release button to release the key

out from the transmitter. u Make sure to fully extend the key.

2. To close the key, press the release button then push the key inside the transmitter until you hear a click.

Retractable Master Keys

Panic Button

Power Tailgate Button

Lock Button

Release Button

Unlock Button

Release Button

Unlock Button Panic

Button

Lock Button

Model with power tailgate

Model without power tailgate

Release Button

Press

87Continued

uuLocking and Unlocking the DoorsuKey Types and Functions

88

C o

n tro

ls

1Valet Key

When you need to leave a key with a third party, leave the valet key.

1Key Number Tag

Keep the key number tag separate from the key in a safe place outside of your vehicle. If you wish to purchase an additional key, contact a dealer.

If you lose your key and you cannot start the engine, contact a dealer.

2012 TSX5D-31TL7610.book 88

Can be used to start and stop the engine, and lock and unlock drivers door.

Contains a number that you will need if you purchase a replacement key.

Valet Key

Key Number Tag

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside C

o n

tro ls

1Using the Remote Transmitter

Open the door within 30 seconds. If you do not open a door within 30 seconds of unlocking the vehicle with the remote transmitter, the doors will automatically relock.

If the interior light switch is in the door activated position, the interior lights come on when you press the unlock button. No doors opened: The lights fade out after 30 seconds. Doors relocked with the remote: The lights go off immediately.

2 Interior Lights P. 127

The remote transmitter uses low-power signals, so the operating range may vary depending on the surroundings.

The remote transmitter will not work when the key is in the ignition switch. The remote will not lock the vehicle when a door or tailgate is open.

If the distance at which it works varies, the battery is probably low. If the LED does not come on when you press a button, the battery is dead.

2 Replacing the Battery P. 269

2012 TSX5D-31TL7610.book 89

Locking/Unlocking the Doors from the Outside

Locking the doors Press the lock button. Once:

uSome exterior lights will flash, all the doors, tailgate, and fuel fill door will lock, and the security system sets.

Twice (within five seconds after the first push):

uA beeper sounds and verifies the security system is set.

Unlocking the doors Press the unlock button. Once:

uSome exterior lights will flash twice, and the drivers door and fuel fill door unlocks.

Twice: uThe remaining doors and the tailgate

unlock.

Using the Remote Transmitter

LED

Lock Button

Unlock Button

LED

Lock Button

Unlock Button

89Continued

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside

90

C o

n tro

ls

1Locking/Unlocking the Doors Using a Key

When you lock the drivers door with a key, all of the other doors, tailgate, and fuel fill door lock at the same time. When unlocking, the drivers door and fuel fill door unlock first. Turn the key a second time within a few seconds to unlock the remaining doors and the tailgate.

1Locking a Door Without Using a Key

When you lock the drivers door, all the other doors, the tailgate, and fuel fill door lock at the same time. Make sure you have the key in your hand before locking the door to prevent it from being locked in the vehicle.

2012 TSX5D-31TL7610.book 90

Fully insert the key and turn it. If you are using the master key, make sure it is fully extended.

Locking the drivers door Pull the lock tab rearward a or push the master door lock switch in the lock direction b, and close the door.

Locking the passengers doors Pull the lock tab rearward and close the door.

Lockout prevention system The doors and the tailgate cannot be locked when the key is in the ignition switch, and any door or the tailgate is open.

Locking/Unlocking the Doors Using a Key

Lock Unlock

Locking a Door Without Using a Key

a

b

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Inside C

o n

tro ls

1Using the Lock Tab

When you lock the door using the lock tab on the drivers door, all of the other doors, tailgate, and fuel fill door lock at the same time. When you unlock the door using the lock tab on the drivers door, only the drivers door will unlock.

1Using the Master Door Lock Switch

When you lock/unlock the drivers door using the master lock switch, all the other doors, tailgate, and fuel fill door lock/unlock at the same time.

2012 TSX5D-31TL7610.book 91

Locking/Unlocking the Doors from the Inside

Locking a door Pull the lock tab rearward.

Unlocking a door Push the lock tab forward.

Press the master door lock switch in as shown to lock or unlock all doors and the tailgate.

Using the Lock Tab

To Unlock

Lock Tab To Lock

Using the Master Door Lock Switch

Master Door Lock Switch

To Unlock

To Lock

91

92

uuLocking and Unlocking the DoorsuChildproof Door Locks

C o

n tro

ls

1Childproof Door Locks

To open the door from the inside when the childproof door lock is on, put the lock tab in the unlock position, lower the rear window, put your hand out of the window, and pull the outside door handle.

1Auto Door Lock/Unlock

The auto door lock/unlock settings can be customized using the multi-information display.

2 Customized Features P. 79

2012 TSX5D-31TL7610.book 92

Childproof Door Locks The childproof door locks prevent the rear doors from being opened from the inside regardless of the position of the lock tab.

Slide the lever in the rear door to the lock position, and close the door.

When opening the door Open the door using the outside door handle.

Auto Door Lock/Unlock Auto door lock The auto door lock function automatically locks all the doors and the tailgate, and the fuel fill door when the vehicle reaches about 10 mph (15 km/h).

Auto door unlock When you depress the brake pedal and move the shift lever to (P , the drivers door automatically unlocks.

Setting the Childproof Door Locks

Lock

Unlock

2012 TSX5D-31TL7610.book 93

Opening and Closing the Tailgate

C

o n

tro ls

1Precautions for Opening/Closing the Tailgate

Be careful not to put your hands between the tailgate and the cargo area when closing the gate.

When operating the power tailgate, make sure there is enough space around your vehicle. People near the tailgate may be seriously hurt if the tailgate hits their head or closes on their hands. Be especially cautious if children are around.

When you are storing or picking up luggage from the cargo area while the engine is idling, do not stand in front of the exhaust pipe. You may get burned.

Do not allow any passenger in the cargo space. They may get hurt during hard braking, a sudden acceleration, or a crash.

3WARNING Closing a power tailgate while anyone is in the path of the tailgate can cause serious injury.

Make sure everyone is clear before closing the tailgate.

Precautions for Opening/Closing the Tailgate Always make sure individuals and objects are clear of the tailgate before opening or closing it.

Opening the tailgate Open the tailgate all the way. u If it is not fully opened, the tailgate may begin to close under its own weight.

Be careful when it is windy. The wind may cause the tailgate to close.

Closing the tailgate Keep the tailgate closed while driving to:

uAvoid possible damage. uPrevent exhaust gas from leaking into the vehicle. 2 Carbon Monoxide Gas P. 61

93

94

uuOpening and Closing the TailgateuOpening/Closing the Tailgate Using the Tailgate Open Handle

C o

n tro

ls

2012 TSX5D-31TL7610.book 94

Opening/Closing the Tailgate Using the Tailgate Open Handle

When all the doors are unlocked, the tailgate is unlocked. Pull the tailgate open handle and lift open the tailgate.

To manually close the tailgate, grab the inner handle, pull the tailgate down, and push it closed from the outside.

Tailgate Open Handle

Inner Handle

uuOpening and Closing the TailgateuOpening/Closing the Power Tailgate* C

o n

tro ls

1Opening/Closing the Power Tailgate*

The power tailgate may not open or close under the following conditions: You start the engine while the tailgate is

automatically opening or closing. The vehicle is parked on a steep hill. The vehicle is swayed in a strong wind. The tailgate or the roof is covered with snow or ice.

If you close the power tailgate when all the doors are locked, the power tailgate locks automatically.

If you replace the battery or the power tailgate fuse while the tailgate is open, the power tailgate may be disabled. The power tailgate resumes once you manually close the tailgate.

Installing aftermarket components other than genuine Acura accessories on the power tailgate may prevent it from fully opening or closing.

Make sure the power tailgate is fully open before you get your luggage in and out.

Make sure the power tailgate is fully closed before you start the vehicle.

The beeper sounds when you turn the ignition switch to ON (w, and move the shift lever out of the (P position while the power tailgate is still open, or closing.

2012 TSX5D-31TL7610.book 95

Opening/Closing the Power Tailgate*

The power tailgate can be operated by pressing the power tailgate button on the remote transmitter, pressing the power tailgate switch on the drivers door, or pressing the button on the tailgate.

The power tailgate can be opened when: The tailgate is fully closed. The shift lever is in (P . Press and hold the tailgate button on the remote transmitter for about one

second. uIf you have changed the power tailgate keyless open mode setting to when

unlocked, you need to unlock the tailgate before you press the tailgate button to open it.

2 Customized Features P. 79

The power tailgate can be closed when: The tailgate is fully open. The shift lever is in (P . Press and hold the tailgate button on the remote transmitter for about one

second.

95Continued* Not available on all models

uuOpening and Closing the TailgateuOpening/Closing the Power Tailgate*

96

C o

n tro

ls

1Opening/Closing the Power Tailgate*

If the power tailgate meets resistance while opening or closing, the auto reverse feature reverses the direction. Three beeps sound.

The auto reverse function stops sensing when the tailgate is almost closed to make sure that it fully closes.

Do not touch the sensors located on both sides of the tailgate. The power tailgate does not close if you touch either sensor when you are trying to close the tailgate.

Be careful not to scratch the sensors with a sharp object. If scratched, they can be damaged, and the power tailgate closing feature malfunctions.

1Remote Transmitter

You can change the condition for opening the power tailgate with the multi-information display.

2 Customized Features P. 79

2012 TSX5D-31TL7610.book 96

To open or close the power tailgate, do the following:

If the power tailgate keyless open mode is in ANYTIME

Press and hold the tailgate button for about one second.

If the power tailgate keyless open mode is in WHEN UNLOCKED

Press the unlock button twice and unlock all doors and the tailgate first. Then, press and hold the tailgate button for about one second.

The beeper sounds and some exterior light flash.

To reverse direction while the power tailgate is in operation, press the button again. The beeper sounds three times and the tailgate reverses direction.

Remote Transmitter

Tailgate Button

* Not available on all models

uuOpening and Closing the TailgateuOpening/Closing the Power Tailgate* C

o n

tro ls

1Power Tailgate Close Button

If you pull the tailgate open handle while the tailgate is automatically opening or closing, the power tailgate operation stops. Use caution if the tailgate stops in the middle of either operation. It may suddenly swing up or down.

2012 TSX5D-31TL7610.book 97

To open or close the power tailgate, press the tailgate button in the drivers door for about one second. The beeper sounds and some exterior lights flash.

To reverse direction while the power tailgate is in operation, press the button again. The beeper sounds three times and the tailgate reverses direction.

Press the button on the tailgate to close the power tailgate.

If you press the button again while the power tailgate is closing, it stops and reverses direction.

Power Tailgate Button

Power Tailgate Button

Power Tailgate Close Button

Power Tailgate Close Button

Continued 97

uuOpening and Closing the TailgateuOpening/Closing the Power Tailgate*

98

C o

n tro

ls

1Auto-Closer

The auto-closer feature does not activate if you pull the tailgate open handle while the power tailgate is closing.

Do not put any force on the tailgate while the power tailgate is latching.

Keep your hands away from the tailgate when you manually close the tailgate and let it latch automatically. It is dangerous to put your hands around the tailgate as it starts to latch itself.

1Power Tailgate Fail-Safe Mode

If you try to manually close the power tailgate immediately after it fully opens, the power tailgate fail-safe mode may activate.

Once the power tailgate fail-safe mode activates, wait until the power tailgate fully closes. Keep away from the power tailgate when it is in motion.

If the power tailgate fail-safe mode constantly activates, consult at a dealer.

2012 TSX5D-31TL7610.book 98

If you manually close the power tailgate, it latches automatically.

The power tailgate fail-safe mode detects if there is an extra load on the tailgate (for example, it is covered with snow). If an extra load is detected, the tailgate opens completely then lowers to the closed position.

Auto-Closer

Power Tailgate Fail-Safe Mode

2012 TSX5D-31TL7610.book 99

Security System

C

o n

tro ls

1Immobilizer System

NOTICE Leaving the ignition key in the vehicle can result in theft or accidental movement of the vehicle. Always take the ignition key with you whenever you leave the vehicle unattended.

Do not alter the system or add other devices to it. Doing so may damage the system and make your vehicle inoperable.

1Security System Alarm

The security alarm continues for a maximum of two minutes until the security system deactivates.

Immobilizer System The immobilizer system prevents a key that has not been pre-registered from starting the engine. Each key contains electronic transmitters that use electronic signals to verify the key.

Pay attention to the following when inserting the key into the ignition switch. Do not allow objects that emit strong radio waves near the ignition switch. Make sure the key is not covered by or touching a metal object. Do not bring a key from another vehicles immobilizer system near the ignition

switch.

Security System Alarm The security system alarm activates when the doors, tailgate, or hood are opened without the key, or remote transmitter. It also activates if you turn the ignition switch to ON (w after locking the doors with the remote transmitter.

When the security system alarm activates The horn sounds intermittently, and all of the exterior lights flash.

To deactivate the security system alarm Unlock the vehicle using the key, or remote transmitter. The system, along with the horn and flashing lights, are deactivated.

99Continued

uuSecurity SystemuSecurity System Alarm

100

C o

n tro

ls

1Security System Alarm

Do not set the security system alarm when someone is in the vehicle or a window is open. The system can accidentally activate when: Unlocking the door with the lock tab or the master

door lock switch.

Opening the tailgate with the power tailgate button on the drivers door.

If the battery goes dead after you have set the security system alarm, the security alarm may go off once the battery is recharged or replaced. If this occurs, deactivate the security system alarm by unlocking a door using the key or remote transmitter.

Do not attempt to alter this system or add another device to it.

Model with power tailgate

2012 TSX5D-31TL7610.book 100

Setting the security system alarm The security system alarm automatically sets when the following conditions have been met: The ignition switch is in LOCK (0 , and the key has been removed from the

ignition switch. The hood is closed. All doors and the tailgate are locked with the remote transmitter.

When the security system alarm sets The security system indicator in the instrument panel blinks. When the blinking interval changes after about 15 seconds, the security system is set.

To cancel the security system alarm The security system is canceled when the vehicle is unlocked using the key or remote transmitter. The security system indicator goes off at the same time.

The panic button on the remote transmitter

If you press the PANIC button for approximately one second, the following will occur: The horn sounds. Some exterior lights flash for about 30

seconds.

Canceling panic mode Press any button on the remote transmitter, or turn the ignition switch to ON (w .

Panic Mode

Panic Button

2012 TSX5D-31TL7610.book 101

Opening and Closing the Windows

C

o n

tro ls

1Opening/Closing the Power Windows

The power windows can be operated for up to 10 minutes after you turn the ignition switch off. Opening either front door cancels this function.

Auto Reverse If a power window senses resistance when closing automatically, it will stop closing and reverse direction.

The drivers window auto reverse function is disabled when you continuously pull up the switch.

The auto reverse function stops sensing when the window is almost closed to ensure that it fully closes.

3WARNING Closing a power window on someones hands or fingers can cause serious injury.

Make sure your passengers are away from the windows before closing them.

Opening/Closing the Power Windows The power windows can be opened and closed when the ignition switch is in ON (w, using the switches on the doors. The drivers side switches can be used to open and close all of the windows.

The power window lock button on the drivers side must be switched off (not pushed in, indicator off) to open and close the windows from anywhere other than the drivers seat.

When the power window lock button is turned on (pushed in, indicator on), you can only operate the drivers window. Turn the power window lock button on when children are in the vehicle.

Automatic operation To open: Push the switch down firmly. To close: Pull the switch up firmly.

The window opens or closes completely. To stop the window at any time, push or pull the switch briefly.

Manual operation To open: Push the switch down lightly. To close: Pull the switch up lightly.

Release the switch when the window reaches the desired position.

Opening/Closing Windows with Auto-Open/Close Function

On Off

Indicator

Drivers Window Switch

Front Passengers Window Switch

Power Window Lock Button

101Continued

uuOpening and Closing the WindowsuOpening/Closing the Power Windows

102

C o

n tro

ls

1Opening Windows and Moonroof with the Remote Transmitter

You cannot operate the power windows with the remote transmitter when the door is open.

2012 TSX5D-31TL7610.book 102

To open: Push the switch down. To close: Pull the switch up.

Release the switch when the window reaches the desired position.

To open: Press the unlock button twice within 10 seconds and hold it down for the second time. If the windows stop midway, repeat the procedure.

Opening/Closing Windows without Auto-Open/Close Function

Close

Open

Opening Windows and Moonroof with the Remote Transmitter

Unlock Button

uuOpening and Closing the WindowsuOpening/Closing the Power Windows C

o n

tro ls

1Opening/Closing the Windows/Moonroof with the Key

You cannot close the power windows with the key when the door is open.

2012 TSX5D-31TL7610.book 103

To open: Unlock the drivers door with the key. Within 10 seconds of returning the key to the central position, turn the key in the unlock direction and hold it there. To close: Lock the drivers door with the key. Within 10 seconds of returning the key to the central position, turn the key in the lock direction and hold it there.

Release the key to stop the windows/ moonroof at the desired position. If you want further adjustment, repeat the same operation.

Opening/Closing the Windows/Moonroof with the Key

Close Open

103

104

C o

n tro

ls

2012 TSX5D-31TL7610.book 104

Opening and Closing the Moonroof

1Opening/Closing the Moonroof

NOTICE Opening the moonroof in below freezing temperature or when it is covered with snow or ice can damage the moonroof panel or motor.

The power moonroof can be operated for up to 10 minutes after you turn the ignition switch off. Opening either front door cancels this function.

When resistance is detected, the auto reverse function causes the moonroof to change directions, then stop. Auto reverse stops sensing when the moonroof is almost closed to ensure that it fully closes. Make sure that all objects, including fingers, are clear of the moonroof.

3WARNING Opening or closing the moonroof on someone's hands or fingers can cause serious injury.

Make sure all hands and fingers are clear of the moonroof before opening or closing it.

You can only operate the moonroof when the ignition switch is in ON (w . Use the switch in the front of the ceiling to open and close the moonroof.

Automatic operation To open: Pull the switch back firmly, then release. To close: Push the switch forward firmly, then release.

The moonroof will automatically open or close all the way. To stop the moonroof midway, touch the switch briefly.

Manual operation To open: Pull the switch back, and hold it until the desired position is reached. To close: Push the switch forward, and hold it until the desired position is reached.

Tilting the moonroof up To tilt: Push on the center of the moonroof switch. To close: Push the switch forward firmly, then release.

Opening/Closing the Moonroof

2012 TSX5D-31TL7610.book 105

Operating the Switches Around the Steering Wheel

C

o n

tro ls

1Ignition Switch

You cannot take the key out unless the shift lever is in (P.

If you open the drivers door when the key is in LOCK (0 or ACCESSORY (q, a warning buzzer will sound to remind you to take the key out. When this happens, the following messages appear on the multi-information display: In LOCK (0: REMOVE KEY. In ACCESSORY (q: REMOVE KEY. The buzzer will

stop when you take the key out. If the key wont turn from LOCK (0 to ACCESSORY (q, turn the key while moving the steering wheel left and right. The steering wheel will unlock, allowing the key to turn.

Ignition Switch

(0 LOCK: Insert and remove the key in this position.

(q ACCESSORY: Operate the audio system and other accessories in this position.

(w ON: This is the position when driving.

(e START: This position is for starting the engine. The switch returns to ON (w when you let go of the key.

105

106

uuOperating the Switches Around the Steering WheeluTurn Signals

C o

n tro

ls

1Light Switches

If you remove the key from the ignition switch while the light is on, a chime sounds when the drivers door is opened.

When the lights are on, the lights on indicator in the instrument panel will be on.

2 Indicators P. 64

Repeatedly turning the headlights on and off reduces the life of the HID headlight bulbs. If you sense that the level of the headlights is abnormal, have the vehicle inspected by a dealer.

Do not leave the lights on when the engine is off because it will cause the battery to discharge.

2012 TSX5D-31TL7610.book 106

Turn Signals The turn signals can be used when the ignition switch is in ON (w .

Light Switches

Rotating the light switch turns the lights on and off, regardless of the position of the ignition switch. High beams Push the lever forward until you hear a click. Low beams When in high beams, pull the lever back to return to low beams. Flashing the high beams Pull the lever back, and release it.

Right Turn

Left Turn

Manual Operation

High Beams

Flashing the high beams Low Beams

Turns on parking, side marker, tail and license plate lights

Turns on headlights, parking, side marker, tail, and license plate lights

uuOperating the Switches Around the Steering WheeluLight Switches C

o n

tro ls

1Automatic Operation (automatic lighting control)

We recommend that you turn on the lights manually when driving at night, in a dense fog, or in dark areas such as long tunnels or parking facilities.

The light sensor is in the location shown below. Do not cover this light sensor with anything; otherwise, the automatic lighting system may not work properly.

Adjust the auto light sensitivity as follows:

Light Sensor

SettingSensor Sensitivity Ambient Light at More Sensitive

Less Sensitive

Bright

Dark

MAX

MIN

MID

HIGH

LOW

2012 TSX5D-31TL7610.book 107

Automatic lighting control can be used when the ignition switch is in ON (w .

When you turn the light switch to AUTO, the headlights and other exterior lights will switch on and off automatically depending on the ambient brightness.

uYou can change the auto light sensitivity setting. 2 Customized Features P. 79

Automatic lighting off feature The headlights, all other exterior lights, and the instrument panel lights turn off within 15 seconds after you remove the key and close the drivers door.

u You can change the headlight auto off timer setting. 2 Customized Features P. 79

If you turn the ignition switch to LOCK (0 with the headlight switch on, but do not open the door, the lights turn off after 10 minutes (3 minutes, if the switch is in the AUTO position).

The lights turn on again when you unlock or open the drivers door. If you unlock the door, but do not open it within 15 seconds, the lights go off. If you open the drivers door, you will hear a lights on reminder chime.

Automatic Operation (automatic lighting control)

107

108

uuOperating the Switches Around the Steering WheeluFog Lights

C o

n tro

ls

1Fog Lights

When the fog lights are on, the indicator in the instrument panel will be on. They go off when the headlights turn off, or when the daytime running lights are on.

2 Indicators P. 64

2012 TSX5D-31TL7610.book 108

Fog Lights When the low beam headlights are on, turn the fog light switch on to use the fog lights.

Daytime Running Lights The high beam headlights come on slightly dimmer than normal when the following conditions have been met:

The ignition switch is in ON (w . The headlight switch is off, or in . The parking brake is released.

The lights remain on even if you set the parking brake. Turning off the ignition switch will turn off the daytime running lights.

The high beam headlights return to the original brightness once the headlight switch is turned on.

Fog Light Switch

uuOperating the Switches Around the Steering WheeluWipers and Washers C

o n

tro ls

1Wipers and Washers

NOTICE Do not use the wipers when the windshield is dry. The windshield will get scratched, or the rubber blades will get damaged.

NOTICE In cold weather, the blades may freeze to the windshield, becoming stuck. Operating the wipers in this condition may damage the wipers. Use the defroster to warm the windshield, then turn the wipers on.

If the vehicle speeds up while the wipers are operating intermittently, the length of the wipe interval shortens. When the vehicle starts moving, the wipers make a single sweep. The wiper operation of the shortest delay setting ( ) and the LO setting become the same when the vehicle speeds up.

Turn the washers off if no washer fluid comes out. The pump may get damaged.

2012 TSX5D-31TL7610.book 109

Wipers and Washers

The windshield wipers and washers can be used when the ignition switch is in ON (w .

MIST The wipers run at high speed until you release the lever.

Wiper switch (OFF, INT, LO, HI) Change the wiper switch setting according to the amount of rain.

Adjusting the delay Turn the adjustment ring to adjust the wiper delay.

Washer Sprays while you pull the lever toward you. When you release the lever, the wipers make two or three more sweeps before stopping.

Front Wiper/Washer

Intermittent Time Adjustment Ring

a MIST b OFF c INT: Low speed with intermittent d LO: Low speed wipe e HI: High speed wipe

Pull to use washer.

a

b

c

d

e

Long delay

Short delay

109Continued

uuOperating the Switches Around the Steering WheeluWipers and Washers

110

C o

n tro

ls

1Wipers and Washers

If the wiper stops operating due to any obstacle such as the build-up of snow, park the vehicle in a safe place.

Rotate the wiper switch to OFF, and turn the ignition switch to ACCESSORY (q or LOCK (0, then remove the obstacle.

The wiper motor is equipped with a breaker that may stop motor operation temporarily to prevent an overload. Wiper operation will return to normal within a few minutes, once the circuit has returned to normal.

2012 TSX5D-31TL7610.book 110

The rear wiper and washer can be used when the ignition switch is in ON (w.

Wiper switch (OFF, ON) The wiper operates intermittently after completing a few sweeps.

Washer ( ) Sprays while you rotate the switch to this position. Hold it to activate the wiper and to spray the washer. Once released, it stops operating after a few more sweeps.

Operating in reverse When you shift the transmission to (R with the front wiper activated, the rear wiper operates automatically as follows even if its switch is off.

Rear Wiper/Washer

a ON: Intermittent b OFF c Washer

a

b

c

c

Front Wiper Position Rear Wiper Operation INT (Intermittent) Intermittent

LO (Low speed wipe) HI (High speed wipe)

Continuous

uuOperating the Switches Around the Steering WheeluBrightness Control C

o n

tro ls

1Brightness Control

Instrument panel brightness varies, depending on whether the exterior lights are on or off. The instrument panel dims to reduce glare when they are on.

Pressing either (information) button switches the display.

If you turn the knob to the right until the brightness display is up to max, the beeper sounds. This cancels the reduced instrument panel brightness when the parking lights are on.

The brightness can be set differently for when the exterior lights are on, and when they are off.

2012 TSX5D-31TL7610.book 111

Brightness Control When the parking lights are turned on and the ignition switch is in ON (w, you can use the brightness control knob to adjust instrument panel brightness.

Brighten: Turn the knob to the right. Dim: Turn the knob to the left.

You will hear the beeper when the brightness reaches minimum or maximum. The multi- information display will return to its original state several seconds after you adjust the brightness.

Brightness level indicator The brightness level is shown on the multi- information display while you are adjusting it. As the brightness level increases to the right, the instrument panel gets brighter.

Control Knob

111

112

uuOperating the Switches Around the Steering WheeluRear Defogger/Heated Door Mirror Button

C o

n tro

ls

1Rear Defogger/Heated Door Mirror Button

NOTICE When cleaning the inside of the rear window, be careful not to damage the heating wires. It is critical to wipe the window from side to side along the defogger heating wires.

This system consumes a lot of power, so turn it off when the window has been defogged. Also, do not use the system for a long period when the engine is idling. This may weaken the battery, making it difficult to start the engine.

2012 TSX5D-31TL7610.book 112

Rear Defogger/Heated Door Mirror Button Press the rear defogger and heated door mirror button to defog the rear window and mirrors when the ignition is in ON (w.

The rear defogger and heated door mirrors automatically switch off after 10-30 minutes depending on the outside temperature. However, if the outside temperature is 32F (0C) or below, they do not automatically switch off.

uuOperating the Switches Around the Steering WheeluDriving Position Memory System C

o n

tro ls

1Driving Position Memory System

Using the multi-information display, you can disable the automatic seat adjustment function.

2 Customized Features P. 79

You can cancel the driving position memory link and customized settings. Press and hold the lock and unlock buttons at the same time. The LED in the remote transmitter blinks twice and the default settings are restored.

To turn the memory position link settings back on, repeat this procedure. The LED will blink once.

2012 TSX5D-31TL7610.book 113

Driving Position Memory System You can store two drivers seat positions with the driving position memory system. When you unlock and open the drivers door with a remote transmitter, the seat adjusts automatically to one of the two preset positions.

The multi-information display shows you which remote transmitter you used to unlock the vehicle when you enter. Driver 1 transmitter is linked to memory button 1. Driver 2 transmitter is linked to memory button 2.

Driver 1 Driver 2

113Continued

uuOperating the Switches Around the Steering WheeluDriving Position Memory System

114

C o

n tro

ls

1Storing a Position in Memory

After you press the SET button, the storing operation will be canceled when: You do not press the memory button within five

seconds. You readjust the seat position before the double-

beep. You turn the ignition switch to any position except

ON (w.

1Recalling the Stored Position

The seat will stop moving if you: Press the SET button, or a memory button ( (1 or

(2). Adjust the seat position. Shift into any position except (P.

2012 TSX5D-31TL7610.book 114

1. Adjust the drivers seat to the desired position, and turn the ignition switch to ON (w .

2. Press the SET button. u You will hear the beeper, and the

memory button indicator light will blink. 3. Press memory button (1 or (2 within five

seconds of pressing the SET button. u Once the seat position has been

memorized, the indicator light on the button you pressed stays on.

1. Move the shift lever to (P. 2. Apply the parking brake. 3. Press a memory button ( (1 or (2 ). u You will hear the beeper, and the

indicator light will blink.

The seat will automatically move to the memorized position. When it has finished moving, you will hear the beeper, and the indicator light stays on.

Storing a Position in Memory

Memory Button 1 Memory Button 2

Set Button

Recalling the Stored Position

Memory Buttons

uuOperating the Switches Around the Steering WheeluAdjusting the Steering Wheel C

o n

tro ls

1Adjusting the Steering Wheel

Make any steering wheel adjustments before you start driving.

3WARNING Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash.

Adjust the steering wheel only when the vehicle is stopped.

2012 TSX5D-31TL7610.book 115

Adjusting the Steering Wheel The steering wheel height and distance from your body can be adjusted so that you can comfortably grip the steering wheel in an appropriate driving posture.

1. Pull the steering wheel adjustment lever up. u The steering wheel adjustment lever is

under the steering column. 2. Move the steering wheel up or down, and

in or out. u Make sure you can see the instrument

panel gauges and indicators. 3. Push the steering wheel adjustment lever

down to lock the steering wheel in position. u After adjusting the position, make sure

you have securely locked the steering wheel in place by trying to move it up, down, in, and out.

To adjust

To lock Lever

115

116

C o

n tro

ls

2012 TSX5D-31TL7610.book 116

Adjusting the Mirror

1Adjusting the Mirror

Keep the inside and outside mirrors clean and adjusted for best visibility.

Adjust the mirrors before you start driving. 2 Adjusting the Seat Positions P. 118

1Automatic Dimming Rearview Mirror

The auto dimming function cancels when the shift position is in (R.

Interior Rearview Mirror Adjust the angle of the rearview mirror when you are sitting in the correct driving position.

When driving after dark, the automatic dimming rearview mirror reduces the glare from headlights behind you. Press the auto button to turn this function on and off. When activated, the auto indicator comes on.

Power Door Mirrors You can adjust the door mirrors when the ignition switch is in ON (w .

Mirror position adjustment L/R selector switch: Select the left or right mirror. After adjusting the mirror, return the switch to the center position. Mirror position adjustment switch: Press the switch left, right, up, or down to move the mirror.

Automatic Dimming Rearview Mirror

Indicator

Auto Button

Sensor

Selector Switch Adjustment Switch

uuAdjusting the MirroruPower Door Mirrors C

o n

tro ls

2012 TSX5D-31TL7610.book 117

If activated, the passenger side door mirror automatically tilts downward when you put the shift lever in (R ; this improves close-in visibility on the passenger side of the vehicle when backing up. The mirror automatically returns to its original position when you shift out of (R.

To activate this feature, turn the ignition switch to ON (w and slide the selector switch to the passengers side.

Reverse Tilt Door Mirror

Selector Switch

117

118

C o

n tro

ls

2012 TSX5D-31TL7610.book 118

Adjusting the Seats

1Adjusting the Seats

The National Highway Traffic Safety Administration and Transport Canada recommend that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest.

Always make seat adjustments before driving.

3WARNING Sitting too close to a front airbag can result in serious injury or death if the front airbags inflate.

Always sit as far back from the front airbags as possible while maintaining control of the vehicle.

Adjusting the Seat Positions Adjust the drivers seat as far back as possible while allowing you to maintain full control of the vehicle. You should be able to sit upright, well back in the seat and be able to adequately press the pedals without leaning forward, and grip the steering wheel comfortably. The passengers seat should be adjusted in a similar manner, so that it is as far back from the front airbag in the dashboard as possible.

Adjusting the front seat

Move back.

Allow sufficient space.

Horizontal Position Adjustment

Height Adjustment (Drivers seat only)

Seat-back Angle Adjustment

Drivers seat is shown

uuAdjusting the SeatsuAdjusting the Seat Positions C

o n

tro ls

1Adjusting the Seat-Backs

Do not put a cushion, or other object, between the seat-back and your back.

Doing so may interfere with proper seat belt or airbag operation.

If you cannot get far enough away from the steering wheel and still reach the controls, we recommend that you investigate whether some type of adaptive equipment may help.

3WARNING Reclining the seat-back too far can result in serious injury or death in a crash.

Adjust the seat-back to an upright position, and sit well back in the seat.

2012 TSX5D-31TL7610.book 119

Adjust the drivers seat-back to a comfortable, upright position, leaving ample space between your chest and the airbag cover in the center of the steering wheel.

The front seat passenger should also adjust their seat-back to a comfortable, upright position.

Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupants chest reduces the protective capability of the belt. It also increases the chance of sliding under the belt in a crash and being seriously injured. The farther a seat-back is reclined, the greater the risk of injury.

Adjusting the Seat-Backs

Continued 119

uuAdjusting the SeatsuAdjusting the Seat Positions

120

C o

n tro

ls

1Adjusting the Head Restraints

The drivers and front passengers seats have active head restraints.

2 Active Head Restraints P. 124

3WARNING Improperly positioning head restraints reduces their effectiveness and increases the likelihood of serious injury in a crash.

Make sure head restraints are in place and positioned properly before driving.

2012 TSX5D-31TL7610.book 120

Your vehicle is equipped with head restraints in all seating positions.

Head restraints are most effective for protection against whiplash and other rear- impact crash injuries when the center of the back of the occupants head rests against the center of the restraint. The tops of the occupants ears should be level with the center height of the restraint.

Adjusting the front and rear outer head restraint positions To raise the head restraint: Pull it upward. To lower the head restrain: Push it down while pressing the release button.

Adjusting the Head Restraints

Position head in the center of the head restraint.

uuAdjusting the SeatsuAdjusting the Seat Positions C

o n

tro ls

1Removing and Reinstalling the Head Restraints

3WARNING Failure to reinstall, or correctly reinstall, the head restraints can result in severe injury during a crash.

Always replace the head restraints before driving.

2012 TSX5D-31TL7610.book 121

A passenger sitting in the center back seating position should adjust the height of their head restraint to an appropriate position before the vehicle begins moving. To raise the head restraint: Pull it upward. To lower the head restraint: Push it down while pressing the release button.

Head restraints can be removed for cleaning or repair.

To remove a head restraint: Pull the restraint up as far as it will go. Then push the release button, and pull the restraint up and out.

To reinstall a head restraint: Insert the legs back in place, then adjust the head restraint to an appropriate height while pressing the release button. Pull up on the restraint to make sure it is locked in position.

Changing the Center Rear Seat Head Restraint Position

Removing and Reinstalling the Head Restraints

Continued 121

122

uuAdjusting the SeatsuAdjusting the Seat Positions

C o

n tro

ls

2012 TSX5D-31TL7610.book 122

The firmness of the seat-back can be adjusted. To make it firmer: Pull the lever backward. To make it less firm: Push the lever forward.

Adjusting the Drivers Seat Lumbar Support

uuAdjusting the SeatsuAdjusting the Seat Positions C

o n

tro ls

1Maintain a Proper Sitting Position

3WARNING Sitting improperly or out of position can result in serious injury or death in a crash.

Always sit upright, well back in the seat, with your feet on the floor.

2012 TSX5D-31TL7610.book 123

After all occupants have adjusted their seats and head restraints, and put on their seat belts, it is very important that they continue to sit upright, well back in their seats, with their feet on the floor, until the vehicle is safely parked and the engine is off.

Sitting improperly can increase the chance of injury during a crash. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased.

In addition, an occupant who is out of position in the front seat can be seriously or fatally injured in a crash by striking interior parts of the vehicle or being struck by an inflating front airbag.

Maintain a Proper Sitting Position

Continued 123

uuAdjusting the SeatsuAdjusting the Seat Positions

124

C o

n tro

ls

1Active Head Restraints

In order for the active head restraints to operate properly: Do not hang any items on the head restraints, or

from the restraint legs. Do not place any object between an occupant and

the seat-back. Install each restraint in its proper location.

After a collision, the activated restraint should return to its normal position. If the restraint does not return to its normal position, or in the event of a severe collision, have the vehicle inspected by a dealer.

2012 TSX5D-31TL7610.book 124

The drivers and front passengers seats have active head restraints. In a rear impact, an occupant properly secured by a seat belt will be pushed against the seat-back and the head restraint will move forward. This reduces the distance between the restraint and the occupants head, which helps reduce the likelihood of whiplash and injuries to the neck and upper spine.

Active Head Restraints

uuAdjusting the SeatsuRear Seats C

o n

tro ls

1Folding Down the Rear Seats

The rear seat-backs can be folded down to accommodate bulkier items in the cargo area.

Never drive with a seat-back folded down and the tailgate open.

2 Carbon Monoxide Gas P. 61

To lock a seat-back upright, push it backwards until it locks. When returning a seat-back to its original position, push it firmly back. Also, make sure all rear shoulder belts are positioned in front of the seat-back, and the center shoulder belt is re-positioned in the guide.

Make sure that the folded seat-back does not press against the front passenger seat, as this can cause the weight sensors in the front passenger seat to work improperly.

2 Passenger Airbag Off Indicator P. 46

2012 TSX5D-31TL7610.book 125

Rear Seats

1. Unlatch the detachable anchor from the anchor buckle and store the detachable anchor in the retractor housing.

2. Pull the release lever and fold down the seat-back.

If the rear head restraints get caught on the front seat-backs, remove the head restraints.

2 Removing and Reinstalling the Head Restraints P. 121

Folding Down the Rear Seats

Anchor Buckle

Lever

125

126

uuAdjusting the SeatsuArmrest

C o

n tro

ls

2012 TSX5D-31TL7610.book 126

Armrest

The console lid can be used as an armrest. To adjust: Push the release lever and slide the armrest to a desired position. Release the lever to lock the position.

Pull down the armrest in the center seat-back.

Using the Front Seat Armrest

Using the Rear Seat Armrest

2012 TSX5D-31TL7610.book 127

Interior Lights/Interior Convenience Items

C

o n

tro ls

1Interior Light Switches

In the door activated position, the interior lights fade out and go off about 30 seconds after the doors are closed. The lights go off after 30 seconds in the following situations: When you unlock the drivers door but do not open

it. When you remove the key from the ignition switch

but do not open a door. You can change the interior lights dimming time.

2 Customized Features P. 79

The interior lights go off immediately in the following situations: When you lock the drivers door. When you close the drivers door with the key in

the ignition switch. When you turn the ignition switch to ON (w.

If you leave any of the doors open without the key in the ignition switch, the interior lights go off after about 15 minutes.

1Map Lights

When the ceiling light switch is in the door activated position and any door is open, the map light will not go off when you press the lens.

Interior Lights

ON The interior lights come on regardless of whether the doors are open or closed. Door activated The interior lights come on in the following situations: When any of the doors are opened. You unlock the drivers door. You remove the key from the ignition

switch. OFF The interior lights remain off regardless of whether the doors are open or closed.

The map lights can be turned on and off by pressing the lenses.

Interior Light Switches

Door Activated Position

Off

Front

Door Activated Position

On

Off

Rear

On

Map Lights

127Continued

128

uu Interior Lights/Interior Convenience Itemsu Interior Lights

C o

n tro

ls

2012 TSX5D-31TL7610.book 128

ON The light comes on when you open the tailgate, and goes off when closed.

OFF The light stays off with or without opening the tailgate.

Cargo Area Light

On Off

uuInterior Lights/Interior Convenience Itemsu Interior Convenience Items C

o n

tro ls

1Glove Box

The glove box light comes on when the parking lights are on.

3WARNING An open glove box can cause serious injury to your passenger in a crash, even if the passenger is wearing the seat belt.

Always keep the glove box closed while driving.

2012 TSX5D-31TL7610.book 129

Interior Convenience Items

Pull the handle to open the glove box. You can lock the glove box with the master key.

Detachable shelf The shelf in the glove box is detachable. To remove it, disengage the tabs.

Glove Box

Glove Box

To Lock

Shelf

129Continued

uu Interior Lights/Interior Convenience Itemsu Interior Convenience Items

130

C o

n tro

ls

1Console Compartment

Use only resealable containers or keep unopened cans in the console compartment. Spilled liquids can damage the upholstery and electrical components in the console compartment.

When the heater begins to divert warm air, the airflow into the console compartment is shut off.

2012 TSX5D-31TL7610.book 130

Pull the handle to open the console compartment.

To use the console lid as an armrest, slide it to the desired position while pulling up the release lever.

You can keep beverage bottles and cans cool with the air conditioning system. 1. Turn the dial counterclockwise to open the

air vent in the console compartment. 2. Turn on the climate control system and

adjust the temperature to cool. 3. Set the mode control or . u The cool air is diverted through the air

vent.

Console Compartment

Close

Open

uuInterior Lights/Interior Convenience Itemsu Interior Convenience Items C

o n

tro ls

2012 TSX5D-31TL7610.book 131

Lift up the handle and put the lid on the notch.

Hold the strap and raise the lid.

Under-floor Storage Area

Handle

Lid

Notch

Floor Storage Compartments

Strap Strap

131Continued

132

uu Interior Lights/Interior Convenience Itemsu Interior Convenience Items

C o

n tro

ls

2012 TSX5D-31TL7610.book 132

Located on the side panel in the cargo area. Pull up the handle and remove the lid.

Side Storage Compartment

Handle

uuInterior Lights/Interior Convenience Itemsu Interior Convenience Items C

o n

tro ls

1Beverage Holders

NOTICE Spilled liquids can damage the upholstery, carpeting, and electrical components in the interior.

Be careful when you are using the beverage holders. Hot liquid can scald you.

2012 TSX5D-31TL7610.book 133

Front seat beverage holders Press the raised detent to open the lid. To close the lid, push it down until it latches.

Rear seat beverage holders Fold the armrest down to use the rear seat beverage holders.

Beverage Holders

Push

Continued 133

uu Interior Lights/Interior Convenience Itemsu Interior Convenience Items

134

C o

n tro

ls

1Accessory Power Sockets

NOTICE Do not insert an automotive type cigarette lighter element. This can overheat the power socket.

NOTICE Do not operate the tire repair kit compressor for more than 15 minutes. The accessory power socket and compressor can overheat and become permanently damaged.

The accessory power socket is designed to supply continuous electrical power for 12 volt DC accessories that are rated 120 watts or less (10 amps).

To prevent battery drain, only use the power socket with the engine running.

2012 TSX5D-31TL7610.book 134

There are three accessory power sockets; one in the console compartment, one in the front of the center console, and one in the left side panel in the cargo area.They can be used when the ignition switch is in ACCESSORY (q or ON (w .

Open the cover to use it.

Accessory Power Sockets

uuInterior Lights/Interior Convenience Itemsu Interior Convenience Items C

o n

tro ls

1Coat Hooks

The coat hooks are not designed for large or heavy items.

2012 TSX5D-31TL7610.book 135

There are coat hooks on the rear left and right grab handles. Pull them down to use them.

Coat Hooks

Continued 135

uu Interior Lights/Interior Convenience Itemsu Interior Convenience Items

136

C o

n tro

ls

1Cargo Hooks

NOTICE Do not hang a large object or an object that weighs more than 6lbs (3kg) on the side cargo hooks. Hanging heavy or large objects may damage the hooks.

2012 TSX5D-31TL7610.book 136

Use the floor cargo hooks to secure luggage in the cargo area.

There are also hooks on both sides of the cargo area.

Cargo Hooks

Hooks

Hook

uuInterior Lights/Interior Convenience Itemsu Interior Convenience Items C

o n

tro ls

1Sunglasses Holder

Keep the holder closed while driving except when accessing stored items.

2012 TSX5D-31TL7610.book 137

To open the sunglasses holder, push and release the indent. To close, push it again until it latches.

You can store eyeglasses and other small items in this holder.

Sunglasses Holder

Push

Continued 137

uu Interior Lights/Interior Convenience Itemsu Interior Convenience Items

138

C o

n tro

ls

1Seat Heaters

Do not use the seat heaters even in LO when the engine is off. Under such conditions, the battery may be weakened, making the engine difficult to start.

In the LO setting, the heater runs continuously and does not automatically turn off after a period of time.

3WARNING Heat induced burns are possible when using seat heaters.

Persons with a diminished ability to sense temperature (e.g., persons with diabetes, lower-limb nerve damage, or paralysis) or with sensitive skin should not use seat heaters.

2012 TSX5D-31TL7610.book 138

The ignition switch must be in ON (w to use the seat heaters. The HI setting heats the seats faster than the LO setting.

There is no heater in the passengers seat- back due to the side airbag cutoff system.

While in HI, the heater cycles on and off. uThe appropriate indicator will be on

while the seat heater is on. Briefly press the button on the opposite side to turn the heater off. The indicator will be off. When a comfortable temperature is reached, select LO to keep the seat warm.

Seat Heaters

uuInterior Lights/Interior Convenience Itemsu Interior Convenience Items C

o n

tro ls

1Tonneau Cover

Do not access parcels in the cargo area while driving. This may cause injury if you have to brake hard.

Do not stack objects higher than the top of the seat in the cargo area. They could block your view and be thrown about the vehicle during a sudden stop.

To prevent tonneau cover damage: Do not place items on the tonneau cover. Do not put weight on the tonneau cover.

2012 TSX5D-31TL7610.book 139

The tonneau cover can be used to conceal your parcels and protect them from direct sunlight.

To extend: Pull the handle on the center edge, then clip the mounting rods in the hooks on both sides of the hatch opening.

To retract: Slip the rods out of the hooks, then slowly roll it back until it is completely retracted.

To remove: Push either end of the housing inward, then lift it out of its position.

Tonneau Cover

Handle

Hook

Mounting Rod

139

140

C o

n tro

ls

2012 TSX5D-31TL7610.book 140

Climate Control System

1Using Automatic Climate Control

If any buttons are pressed while using the climate control system in auto, the function of the button that was pressed will take priority. The AUTO indicator will go off, but functions unrelated to the button that was pressed will be controlled automatically.

To prevent cold air from blowing in from outside, the fan may not start immediately when the AUTO button is pressed.

Once you have set the desired temperature, do not use the temperature control switches more than necessary. Doing so may delay the time it takes to reach the set temperature.

If the interior is very warm, you can cool it down more rapidly by partially opening the windows, turning the system on auto, and setting the temperature to low. Change the fresh mode to recirculation mode until the temperature cools down.

When you set the temperature to the lower or upper limit, Lo or Hi is displayed.

Pressing the ON/OFF button switches the climate control system between on and off. When turned on, the system returns to your last selection.

Using Automatic Climate Control The automatic climate control system maintains the interior temperature you select. The system also selects the proper mix of heated or cooled air that will as quickly as possible, raise or lower the interior temperature to your preference.

Use the system when the engine is running. 1. Press the AUTO button. 2. Adjust the interior temperature using the drivers side or passengers side control

switch. 3. Press the ON/OFF button to cancel.

Switching between the recirculation and fresh air modes Press the (recirculation) button and switch the mode depending on environmental conditions. Recirculation Mode (indicator on): Recirculates air from the vehicles interior through the system. Fresh Air Mode (indicator off): Maintains outside ventilation. Keep the system in fresh air mode in normal situations.

Floor and defroster vents

Floor ventsDashboard and floor vents, and back of the center console

Dashboard vents and back of the center console

AUTO Button

Drivers Side Temperature Control Switch

(Recirculation) Button (Fan Control) Bar

A/C (Air Conditioning) Button

Passengers Side Temperature Control Switch

uuClimate Control SystemuUsing Automatic Climate Control C

o n

tro ls

1Defrosting the Windshield and Windows

For your safety, make sure you have a clear view through all the windows before driving.

Do not set the temperature near the upper or lower limit. When cold air hits the windshield, the outside of the windshield may fog up.

If the side windows fog up, adjust the vents so that the air hits the side windows.

1To rapidly defrost the windows

After defrosting or defogging the windows, switch over to fresh air mode. If you keep the system in recirculation mode, the windows may fog up from humidity. This impedes visibility.

2012 TSX5D-31TL7610.book 141

Pressing the button turns the air conditioner system on and automatically switches the system to fresh air mode.

Press the button again to turn off, the system returns to the previous settings.

To rapidly defrost the windows 1. Press the button. 2. Press the button.

Defrosting the Windshield and Windows

141

142

uuClimate Control SystemuSynchronized Mode

C o

n tro

ls

1Synchronized Mode

When you press the button, the system changes to synchronized mode.

When the system is in dual mode, the driver side temperature and the passenger side temperature can be set separately.

2012 TSX5D-31TL7610.book 142

Synchronized Mode

You can set the temperature synchronously for the driver side and the passenger side in synchronized mode.

1. Press the SYNC button. u The system will switch to synchronized mode.

2. Adjust the temperature using drivers side temperature control switch.

Press the SYNC button to return to dual mode.

uuClimate Control SystemuAutomatic Climate Control Sensors C

o n

tro ls

2012 TSX5D-31TL7610.book 143

Automatic Climate Control Sensors The automatic climate control system is equipped with a sunlight sensor and an interior temperature sensor. Do not cover or spill any liquid on them.

Sunlight Sensor

Temperature Sensor

143

144

2012 TSX5D-31TL7610.book 144

* Not available on all m

2012 TSX5D-31TL7610.book 145

Features

This chapter describes how to operate technology features on models without

the navigation system and HomeLink Universal Transceiver.

Audio System About Your Audio System................ 146 USB Adapter Cable .......................... 147 Auxiliary Input Jack .......................... 148 Audio System Theft Protection ......... 148

Audio System Basic Operation Adjusting the Sound ........................ 150 Playing the AM/FM Radio ................. 151 Playing the XM Radio ..................... 153 Playing a CD .................................... 155 Playing an iPod............................... 158 Playing a USB Flash Drive ................. 161

odels

Playing Bluetooth Audio................. 164 Audio Error Messages

CD Player......................................... 166 iPod/USB Flash Drive....................... 167

Audio Remote Controls.................... 168 General Information on the Audio System XM Radio Service ........................... 169 Recommended CDs ......................... 170 Compatible iPod and USB Flash Drives... 172

HomeLink Universal Transceiver Training HomeLink........................... 173

Bluetooth HandsFreeLink Using HFL ........................................ 175 HFL Menus ...................................... 177

Compass* .......................................... 187

145

146

Featu res

2012 TSX5D-31TL7610.book 146

Audio System

1About Your Audio System

XM Radio is available on a subscription basis only. For more information on XM Radio, contact a dealer.

2 General Information on the Audio System P. 169

XM Radio is available in the United States and Canada, except Hawaii, Alaska, and Puerto Rico.

XM is a registered trademark of Sirius XM Radio, Inc.

Video CDs, DVDs, and 3-inch (8-cm) mini CDs are not supported.

iPod is a registered trademark owned by Apple Inc.

MP3 and AAC are standard audio compression formats. WMA is an audio compression format developed by Microsoft Corporation.

About Your Audio System On models with the navigation system, see the Navigation System Manual for operation of the audio system, AcuraLink*, Bluetooth HandsFreeLink, and voice commands for these features.

The audio system features AM/FM radio and the XM Radio service. It can also play CDs, WMA/MP3/AAC files, iPods, USB flash drives, and Bluetooth devices.

You can operate the audio system from the buttons and switches on the panel, or the remote controls on the steering wheel.

Remote Control

iPod

USB Flash Drive

XM Radio

* Not available on all models

uuAudio SystemuUSB Adapter Cable Featu

res

1USB Adapter Cable

Do not leave the iPod or USB flash drive in the vehicle. Direct sunlight and high temperatures may damage it.

Do not use an extension cable with the USB adapter cable.

Do not connect the iPod or USB flash drive using a hub.

Do not use a device such as a card reader or hard disk drive, as the device or your files may be damaged.

We recommend backing up your data before using the device in your vehicle.

Displayed messages may vary depending on the device model and software version.

If the audio system does not recognize the iPod, try reconnecting it a few times or reboot the device. To reboot, follow the manufacturers instructions provided with the iPod or visit www.apple.com/ ipod.

1Audio Antenna

NOTICE Before using a drive-through car wash, remove the antenna by unscrewing it by hand. This prevents the antenna from being damaged by the car wash brushes.

2012 TSX5D-31TL7610.book 147

USB Adapter Cable 1. Unclip the USB connector and loosen the

adapter cable. 2. Connect the iPod dock connector or the

USB flash drive to the USB connector.

Audio Antenna Your vehicle is equipped with a removable antenna at the rear of the roof.

147

148

uuAudio SystemuAuxiliary Input Jack

Featu res

1Auxiliary Input Jack

To switch the mode, press any of the audio mode buttons. You can return to the AUX mode by pressing the AUX button.

You cannot use the auxiliary input jack if you replace the audio system.

State or local laws may limit the circumstances in which you can launch or control your attached audio device.

1Audio System Theft Protection

Find the audio systems security code and serial number on the radio code card.

Do not store the card in your vehicle. If you lose the radio code card, you must obtain the information from a dealer.

2012 TSX5D-31TL7610.book 148

Auxiliary Input Jack Use the jack in the console compartment to connect standard audio devices.

1. Open the AUX cover. 2. Connect a standard audio device to the

input jack using a 1/8 inch (3.5 mm) stereo miniplug. u The audio system automatically switches

to the AUX mode.

Audio System Theft Protection The audio system is disabled when it is disconnected from the power source, such as when the battery is disconnected or goes dead.

Entering the audio security code ENTER CODE appears on the display when the power is reconnected.

1. Turn on the audio system. 2. Enter the audio security code using the preset buttons. If you enter an incorrect

digit, continue to the last digit, then try again. If you do not enter the code correctly after 10 tries, you need to visit a dealer to have the system reset.

2012 TSX5D-31TL7610.book 149

Audio System Basic Operation

Featu

res

1Audio System Basic Operation

These indications are used to show how to operate the selector knob.

Rotate to select.

Press to ENTER.

To use the audio system function, the ignition switch must be in ACCESSORY (q or ON (w .

Use the selector knob or MENU button to access some audio functions.

Press to switch between the normal and extended display for some functions. The extended display has three segments to display detailed information.

Selector knob: Rotate left or right to scroll through the available choices. Press to set your selection. MENU button: Press to select any setting such as the clock, sound control, or the compass. Press this button again to cancel the menu display mode. RETURN button: Press to go back to the previous display.

RETURN Button

Selector Knob

MENU Button

Menu Display

149

150

uuAudio System Basic OperationuAdjusting the Sound

Featu res

1Adjusting the Sound

When the adjustment level reaches the center, you will see C in the display.

The SVC has four modes: OFF, LOW, MID, and HIGH. SVC adjusts the volume level based on the vehicle speed. As you go faster, audio volume increases. As you slow down, audio volume decreases.

2012 TSX5D-31TL7610.book 150

Adjusting the Sound Press the MENU button, and rotate to adjust the setting. Rotate to scroll through the following choices:

FADER is selectable.

Selector Knob

MENU Button

RETURN Button

BASS

TREBLE

FADER

BALANCE

SUBW

SVC

CLOCK ADJUST

Speed-sensitive Volume Compensation

Subwoofer

Clock setting

uuAudio System Basic OperationuPlaying the AM/FM Radio Featu

res

Preset Buttons (1-6) To store a station: 1. Tune to the selected station. 2. Pick a preset button and hold it

until you hear a beep. To listen to a stored station, select a band, then press the preset button.

Selector Knob Turn to tune the radio frequency.

SKIP Bar Press and hold to search up and down the selected band for a station with a strong signal.

A.SEL (Auto Select) Button Press to scan both bands and store the strongest station in each preset. To turn off auto select, press the button again. This restores the presets you originally set.

2012 TSX5D-31TL7610.book 151

Playing the AM/FM Radio

AM/FM Button Press to select a band.

SCAN Button Press to sample each of the strongest stations on the selected band for 10 seconds. To turn off scan, press the button again.

Knob Press to turn the audio system on and off. Turn to adjust the volume.

VOL/

TITLE Button Press to switch the RDS name on and off.

CATEGORY Bar Press either side to display and select an RDS category.

151Continued

uuAudio System Basic OperationuPlaying the AM/FM Radio

152

Featu res

1Playing the AM/FM Radio

The ST indicator appears on the display indicating stereo FM broadcasts. Stereo reproduction in AM is not available.

Switching the Audio Mode Press the MODE button on the steering wheel.

2 Audio Remote Controls P. 168

You can store six AM stations and twelve FM stations in the preset buttons. FM1 and FM2 let you store six stations each.

A.SEL function scans and stores up to six AM stations and twelve FM stations with a strong signal in the preset buttons.

If you do not like the stations auto select has stored, you can store other frequencies in the preset buttons manually.

1Radio Data System (RDS)

The display shows up to 31 characters of text data. Press and hold the TITLE button to see additional characters. indicates that the text data continues. The display goes back to the previous screen if you press and hold the button again.

2012 TSX5D-31TL7610.book 152

Provides text data information related to your selected RDS capable FM station.

RDS INFO ON Press the TITLE button while listening to an RDS capable station. RDS INFO ON appears, and the station name is displayed.

To find an RDS station from your selected program category 1. Press the CATEGORY bar to display and

select an RDS category. 2. Use SKIP or SCAN to select an RDS station.

Radio Data System (RDS)

RDS Category

uuAudio System Basic OperationuPlaying the XM Radio Featu

res

Knob Press to turn the audio system on and off. Turn to adjust the volume.

VOL/

Preset Buttons (1-6) To store the channel: 1. Select the channel. 2. Pick a preset button and hold it

until you hear a beep. To listen to a stored station, select XM, then press the preset button.

SKIP Bar Press to skip to the previous or next channel.

MENU Button Press to display the menu items.

Selector Knob Turn to select channels.

2012 TSX5D-31TL7610.book 153

Playing the XM Radio

(XM) Button Press to select XM Radio.

TITLE Button Press and release to cycle the display between the name, title, and category.

CATEGORY Bar Press either side to display and select an XM Radio category.

SCAN Button Press to sample all channels (in the channel mode), or channels within a category (in the category mode). Each sampling continues for a few seconds. Press SCAN again to cancel scanning and continue listening to the channel.

153Continued

uuAudio System Basic OperationuPlaying the XM Radio

154

Featu res

1Playing the XM Radio

In the channel mode, all available channels are selectable. In the category mode, you can select a channel within a category (Jazz, Rock, Classical, etc.).

You can store twelve XM stations in the preset buttons. XM1 and XM2 let you store six stations each.

There may be instances when XM Radio does not broadcast all the data fields (artist name, title). This does not indicate a problem with your audio system.

2012 TSX5D-31TL7610.book 154

1. Press the button to select the XM radio band (XM1 or XM2). 2. Press and hold the TITLE button to switch between the channel mode and

category mode. If you press the MENU button, rotate to select MODE/CATEGORY or MODE CHANNEL. Each time you press , the mode switches between them. Press the button to enter the setting.

3. Select a channel using the TUNE ( ), SKIP, CATEGORY, SCAN, or Preset buttons.

1. Press to display a channel list. 2. Rotate to select a channel, then press

.

To Play the XM Radio

To Select a Channel from a List

Channel list is shown.

uuAudio System Basic OperationuPlaying a CD Featu

res

CD Slot Insert a CD about halfway into the CD slot.

SKIP Bar Press or to change tracks (files in MP3 or WMA).

CD Button Press to play a CD.

(CD Eject) Button Press to eject a CD.

MENU Button Press to display menu items (if available).

Selector Knob Turn to change tracks/files. Turn to select an item, then press ENTER to set your selection.

RETURN Button Press to go back to the previous display.

2012 TSX5D-31TL7610.book 155

Playing a CD Your audio system supports audio CDs, CD-Rs and CD-RWs in either MP3 or WMA format. With the CD loaded, press the CD button.

SCAN Button You will get a 10-second sampling of each song. Press to sample all tracks on the CD (all files

in the current folder in MP3 or WMA). Press two times to sample the first file in

each of the main folders (MP3 or WMA). To turn off scan, press and hold the button.

Knob Press to turn the audio system on and off. Turn to adjust the volume.

VOL/

CATEGORY Bar Press to skip to the next folder, and to skip to the beginning of the previous folder in MP3 or WMA.

TITLE Button Press to display the text data on a CD (if it was recorded with text data).

155Continued

uuAudio System Basic OperationuPlaying a CD

156

Featu res

1Playing a CD

NOTICE Do not use CDs with adhesive labels. The label can cause the CD to jam in the unit.

WMA files protected by digital rights management (DRM) cannot be played. The audio system displays UNSUPPORTED, then skips to the next file.

Text data appears on the display under the following circumstances: When you select a new folder, file, or track. When you change the audio mode to CD. When you insert a CD.

The display shows up to 31 characters of text data. Press and hold the TITLE button to see additional characters. indicates that the text data continues. The display goes back to the previous screen if you press and hold the button again.

If you eject the CD but do not remove it from the slot, the system reloads the CD automatically after several seconds.

2012 TSX5D-31TL7610.book 156

1. Press to switch the display to a folder list.

2. Rotate to select a folder.

3. Press to change the display to a list of files in that folder.

4. Rotate to select a file, then press .

How to Select a File from a Folder with the Selector Knob (MP3/WMA)

Folder Selection

Track Selection

uuAudio System Basic OperationuPlaying a CD Featu

res

1How to Select a Play Mode

Press the RETURN button to go back to the previous display, and press the MENU button to cancel this setting mode.

Play Mode Menu Items NORMAL PLAY REPEAT ONE TRACK: Repeats the current track/ file(s). REPEAT ONE FLD : Repeats all files in the current folder. RANDOM IN DISC: Plays all tracks/files in random order. RANDOM IN FLD : Plays all files in the current folder in random order. SCAN TRK: Samples all tracks on the CD.

: Samples all files in the current folder. SCAN FLD : Samples the first file in each folder.

MP3/WMA

MP3/WMA

MP3/WMA MP3/WMA

2012 TSX5D-31TL7610.book 157

You can select repeat, random, and scan modes when playing a track or files. 1. Press the MENU button.

2. Rotate to select PLAY MODE, then press .

3. Rotate to select a mode, then press .

To turn off a play mode 1. Press the MENU button. 2. Rotate to select PLAY MODE, then press . 3. Rotate to select NORMAL PLAY, then press .

How to Select a Play Mode

Play Mode Items

157

158

uuAudio System Basic OperationuPlaying an iPod

Featu res

SKIP Bar Press or to change songs.

Selector Knob Turn to select a song, file, menu item, or play mode. Press ENTER to set your selection.

AUX Button Press to select iPod (if connected).

MENU Button Press to display menu items.

2012 TSX5D-31TL7610.book 158

Playing an iPod Connect the iPod using your dock connector to the USB adapter cable, then press the AUX button.

2 USB Adapter Cable P. 147

Knob Press to turn the audio system on and off. Turn to adjust the volume.

VOL/

TITLE Button Press to display the text data.

RETURN Button Press to go back to the previous display.

uuAudio System Basic OperationuPlaying an iPod Featu

res

1Playing an iPod

Available operating functions vary on models or versions. Some functions may not be available on the vehicles audio system.

If there is a problem, you may see an error message on the audio display.

2 iPod/USB Flash Drive P. 167

2012 TSX5D-31TL7610.book 159

1. Press to display the iPod menu.

2. Rotate to select a menu.

3. Press to display the items on that menu. 4. Rotate to select an item, then press .

How to Select a File from the iPod Menu

iPod Menu: Playlists, Artists, Albums, and Songs

Continued 159

uuAudio System Basic OperationuPlaying an iPod

160

Featu res

1How to Select a Play Mode

Play Mode Menu Items NORMAL PLAY SHUFFLE OFF: Turns off the shuffle mode. REPEAT OFF: Turns off the repeat mode. REPEAT ONE TRACK: Repeats the current track. SHUFFLE ALL: Plays all available files in a selected list (playlists, artists, albums or songs) in random order. SHUFFLE ALBUM: Plays all available albums in a selected list (playlists, artists, albums, or songs) in random order.

2012 TSX5D-31TL7610.book 160

You can select repeat and shuffle modes when playing a file. 1. Press the MENU button.

2. Rotate to select PLAY MODE, then press .

3. Rotate to select a mode, then press .

To turn off a play mode 1. Press the MENU button. 2. Rotate to select PLAY MODE, then press . 3. Rotate to select NORMAL PLAY, then press .

How to Select a Play Mode

Play Mode Items

uuAudio System Basic OperationuPlaying a USB Flash Drive Featu

res

RETURN Button Press to go back to the previous display.

Selector Knob Turn to select a file, then press ENTER set your selection.

AUX Button Press to select USB flash drive (if connected).

SKIP Bar Press or to change files.

MENU Button Press to display menu items.

2012 TSX5D-31TL7610.book 161

Playing a USB Flash Drive Your audio system reads and plays sound files on a USB flash drive in either MP3, WMA or AAC*1 format. Connect your USB flash drive to the USB adapter cable, then press the AUX button.

2 USB Adapter Cable P. 147

*1:Only AAC format files recorded with iTunes are playable on this audio unit.

SCAN Button You will get a 10-second sampling of each file. Press to sample all files in the current folder. Press two times to sample the first file in

each of the main folders. To turn off scan, press and hold the button.

Knob Press to turn the audio system on and off. Turn to adjust the volume.

VOL/

TITLE Button Press to display the text data.

CATEGORY Bar Press to skip to the next folder, and to skip to the beginning of the previous folder.

161Continued

uuAudio System Basic OperationuPlaying a USB Flash Drive

162

Featu res

1Playing a USB Flash Drive

Use the recommended USB flash drives. 2 General Information on the Audio System

P. 169

Files in WMA format protected by digital rights management (DRM) are not played. The audio system displays UNPLAYABLE FILE, and then skips to the next file.

If there is a problem, you may see an error message on the audio display.

2 iPod/USB Flash Drive P. 167

2012 TSX5D-31TL7610.book 162

1. Press to switch the display to a folder list.

2. Rotate to select a folder.

3. Press to change the display to a list of files in that folder.

4. Rotate to select a file, then press .

How to Select a File from a Folder with the Selector Knob

Folder Selection

Track Selection

uuAudio System Basic OperationuPlaying a USB Flash Drive Featu

res

1How to Select a Play Mode

Play Mode Menu Items NORMAL PLAY REPEAT ONE TRACK: Repeats the current file. REPEAT ONE FLD: Repeats all files in the current folder. RANDOM IN FLD: Plays all files in the current folder in random order. RANDOM ALL: Plays all files in random order. SCAN TRK: Samples all files in the current folder. SCAN FLD: Samples the first file in each folder.

2012 TSX5D-31TL7610.book 163

You can select repeat, random, and scan modes when playing a file(s). 1. Press the MENU button.

2. Rotate to select PLAY MODE, then press .

3. Rotate to select a mode, then press .

To turn off a play mode 1. Press the MENU button. 2. Rotate to select PLAY MODE, then press . 3. Rotate to select NORMAL PLAY, then press .

How to Select a Play Mode

Play Mode Items

163

164

uuAudio System Basic OperationuPlaying Bluetooth Audio

Featu res

1Playing Bluetooth Audio

Not all Bluetooth-enabled phones with streaming audio capabilities are compatible with the system. You can find an approved phone by visiting www.acura.com/handsfreelink, or by calling the HandsFreeLink consumer support at 1-888-528- 7876.

In some states, it may be illegal to perform some data device functions while driving.

If more than one phone is paired to the HFL system, there will be a delay before the system begins to play.

2012 TSX5D-31TL7610.book 164

Playing Bluetooth Audio Your audio system allows you to listen to music from your Bluetooth-compatible phone. This function is available when the phone is paired and linked to the vehicles Bluetooth HandsFreeLink (HFL) system.

2 Phone Setup P. 179

Selector Knob Turn to change files. Turn to select an item, then press ENTER to set your selection.

AUX Button Press to select Bluetooth Audio.

SKIP Bar Press or to change files.

RETURN Button Press to go back to the previous display.

MENU Button Press to display menu items.

Knob Press to turn the audio system on and off. Turn to adjust the volume.

VOL/

TITLE Button Press to confirm the device name.

uuAudio System Basic OperationuPlaying Bluetooth Audio Featu

res

1To Play Bluetooth Audio Files

To play the audio files, you may need to operate your phone. If so, follow the phone makers operating instructions.

The pause function may not be available on some phones.

If any audio device is connected to the auxiliary input jack, you may need to press the AUX button repeatedly to select the Bluetooth Audio system.

Switching to another mode pauses the music playing from your phone.

1Switching to HFL

If you receive a call while Bluetooth Audio is in the pause mode, it will resume play after ending the call.

2012 TSX5D-31TL7610.book 165

1. Make sure that your phone is linked to HFL. 2. Press the AUX button.

Check the following if the phone is not recognized: Another HFL-compatible phone, which is not compatible for Bluetooth Audio, is already linked.

To pause or resume a file 1. Press the MENU button. 2. Rotate to select RESUME/PAUSE, then press . Each time you press , the setting switches between PAUSE and RESUME.

Press the (HFL Talk) button on the steering wheel to receive a call when Bluetooth Audio is playing.

2 Bluetooth HandsFreeLink P. 175

Press the (HFL Back) button to end the call and return to Bluetooth Audio.

To Play Bluetooth Audio Files

Switching to HFL

Button

Button

165

166

Featu res

2012 TSX5D-31TL7610.book 166

Audio Error Messages

Solution

ystem off and allow the player to cool down until e is cleared.

will be skipped. The next supported track/file lly.

ct) button and remove the disc, and check that the cleared. isc is not damaged or deformed, and insert the

CDs P. 171

age reappears, press the button, and pull out

disc. lays, there is a problem with the first disc. age repeats, or the disc cannot be removed, ler. ce the disc out of the player.

isc is not damaged or deformed. CDs P. 171

CD Player If a disc error occurs, you may see the following error messages.

Error Message Cause

HEAT ERROR High temperature Turn the audio s

the error messag

UNSUPPORTED Track/file format not supported Current track/file

plays automatica

BAD DISC PLEASE CHECK OWNERS MANUAL PUSH EJECT Mechanical error

Press the (eje error message is

Check that the d disc again.

2 Protecting If the error mess

the disc. Insert a different

If the new disc p If the error mess

contact your dea Do not try to for

MECH ERROR

CHECK DISK LOAD

BAD DISC PLEASE CHECK OWNERS MANUAL

Servo error

CHECK DISC Disc error Check that the d

2 Protecting

uuAudio Error MessagesuiPod/USB Flash Drive Featu

res

ion

device. Then turn the audio system off, and turn the error.

f it appears when a supported iPod is connected,

e iPod. Reconnect the iPod.

M or an unsupported format. This error message g.

are no MP3, WMA, or AAC files in the USB flash

If it appears when the supported device is

2012 TSX5D-31TL7610.book 167

iPod/USB Flash Drive If an error occurs while playing an iPod or USB flash drive, you may see the following error messages. If you cannot clear the error message, contact a dealer.

Error Message Solut

USB ERROR There is a problem with the USB adapter unit.

BAD USB DEVICE PLEASE CHECK OWNERS MANUAL

An incompatible device is connected. Disconnect the it on again. Do not reconnect the device that caused

iPod NO SONG Appears when the iPod is empty.

UNSUPPORTED VER. Appears when an unsupported iPod is connected. I update the iPod software to the newer version.

CONNECT RETRY Appears when the system does not acknowledge th

UNPLAYABLE FILE Appears when the files in the USB flash drive are DR appears for about 3 seconds, then plays the next son

USB NO SONG Appears when the USB flash drive is empty or there drive.

UNSUPPORTED Appears when an unsupported device is connected. connected, reconnect the device.

167

168

Featu res

2012 TSX5D-31TL7610.book 168

Audio Remote Controls

1Audio Remote Controls

The CD mode appears only when a CD is loaded.

When in the AUX mode, the following are operable from the remote controls: iPod/USB flash drive connected to the USB

adapter cable Bluetooth audio (with some phones only)

Allows you to operate the audio system while driving. MODE Button Cycles through the audio modes as follows: FM1 FM2 AM XM1 XM2 CD AUX

VOL Button Press : Increases the volume Press : Decreases the volume

CH Button When listening to radio

Press (+ : Selects the next preset radio station. Press (- : Selects the previous preset radio station.

When listening to a CD, USB flash drive or iPod, or Bluetooth audio Press (+ : Skips to the next song. Press (- : Goes back to the beginning of the current or previous song.

MODE Button

VOL (Volume) Button

CH (Channel) Button

2012 TSX5D-31TL7610.book 169

General Information on the Audio System

Featu

res

1Subscribing to XM Radio

Contact Information for XM Radio: US: XM Radio at www.siriusxm.com or (800) 852- 9696

1Receiving XM Radio

The XM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equator.

You may experience reception problems under the following circumstances: In a location with an obstruction to the south of

your vehicle. In tunnels On the lower level of a multi-tiered road Large items carried on the roof rack

XM Radio Service

1. You need your radio ID ready before registering for subscription. To see the ID in the display: Turn the selector knob until 0 appears.

2. Have your radio ID and credit card number ready, and either call or visit the XM website to subscribe.

Press the (XM) button and stay in this mode for about 30 minutes until the service is activated. Make sure your vehicle is in an open area with good reception.

LOADING: XM is loading the audio or program information. OFF AIR: The channel is not currently broadcasting. UPDATING: The encryption code is being updated. Channels 0 and 1 still work normally. NO SIGNAL: The signal is too weak in the current location. --------: No such channel exists, the channel is not part of your subscription, or the artist or title information is unavailable. ANTENNA: There is a problem with the XM antenna. Contact a dealer.

Subscribing to XM Radio

Receiving XM Radio

XM Radio Display Messages

169

170

uuGeneral Information on the Audio SystemuRecommended CDs

Featu res

1Recommended CDs

A Dual-disc cannot play on this audio unit. If recorded under certain conditions, a CD-R or CD-RW may not play either.

2012 TSX5D-31TL7610.book 170

Recommended CDs Use only high-quality CD-R or CD-RW discs labeled for audio use. Use only CD-R or CD-RW discs on which the recordings are closed. Play only standard round shaped CDs.

Some software files may not allow for audio play or text data display. Some versions of MP3, WMA, or AAC formats may be unsupported.

CDs with MP3, WMA or AAC files

The CD packages or jackets should have one of these marks.

uuGeneral Information on the Audio SystemuRecommended CDs Featu

res

1Protecting CDs

NOTICE Do not insert a damaged CD. It may be stuck inside and damage the audio unit.

Examples:

Damaged CDs

Bubbled/ Wrinkled

With Label/ Sticker

Using Printer Label Kit

Sealed With Plastic Ring Poor

quality CDs

Chipped/ Cracked

Warped Burrs

Small CDs

3-inch (8-cm) CD

Bubbled, wrinkled, labeled, and excessively thick CDs

2012 TSX5D-31TL7610.book 171

Protecting CDs Follow these precautions when handling or storing CDs: Store a CD in its case when it is not being played. When wiping a CD, use a soft clean cloth from the center to the outside edge. Handle a CD by its edge. Never touch either surface. Never insert foreign objects into the CD player. Keep CDs out of direct sunlight and extreme heat. Do not place stabilizer rings or labels on the CD. Avoid fingerprints, liquids, and felt-tip pens on the CD.

171

172

uuGeneral Information on the Audio SystemuCompatible iPod and USB Flash Drives

Featu res

1iPod Model Compatibility

This system may not work with all software versions of these devices.

1USB Flash Drives

Files on the USB flash drive are played in their stored order. This order may be different from the order displayed on your PC or device.

2012 TSX5D-31TL7610.book 172

Compatible iPod and USB Flash Drives

Use a recommended USB flash drive of 256 MB or higher. Some digital audio players may not be compatible. Some USB flash drives (e.g., a device with security lockout) may not work. Some software files may not allow for audio play or text data display. Some versions of MP3, WMA, or AAC formats may be unsupported.

iPod Model Compatibility

Model iPod classic 80GB/160GB iPod classic 120GB iPod classic 160GB (launch in 2009) iPod (5th generation) iPod nano iPod touch

USB Flash Drives

2012 TSX5D-31TL7610.book 173

HomeLink Universal Transceiver

Featu

res

1HomeLink Universal Transceiver

HomeLink is a registered trademark of Johnson Controls., Inc.

Before programming HomeLink to operate a garage door opener, confirm that the opener has an external entrapment protection system, such as an electronic eye, or other safety and reverse stop features. If it does not, HomeLink may not be able to operate it.

The HomeLink Universal Transceiver can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems.

Refer to the safety information that comes with your garage door opener to test that the safety features are functioning properly. If you do not have the safety information, contact the manufacturer.

Before programming HomeLink, make sure that people and objects are out of the way of the garage or gate to prevent potential injury or damage.

When programming a garage door opener, park just outside the garage doors path.

Training HomeLink If you have not trained any of the buttons in HomeLink before, you should erase any previously learned codes. To do this: Press and hold the two outside buttons for

about 20 seconds, until the red indicator blinks. Release the buttons, and proceed to step 1.

If you are training the second or third button, go directly to step 1.

Important Safety Precautions

Red Indicator

173Continued

uuHomeLink Universal TransceiveruTraining HomeLink

174

Featu res

1Training HomeLink

Retraining a Button If you want to retrain a programmed button for a new device, you do not have to erase all button memory. You can replace the existing memory code using this procedure:

Erasing Codes To erase all the codes, press and hold the two outside buttons until the HomeLink indicator begins to blink (about 10 to 20 secs). You should erase all codes before selling the vehicle.

If you have any problems, see the devices instructions, visit www.homelink.com, or call HomeLink at (800) 355-3515.

1. Press and hold the desired HomeLink button until the HomeLink indicator begins to blink.

2. Continue to hold the HomeLink button and follow steps 1 - 3 under Training a Button.

Indicator remains on for about 25 secs.

Standard transmitter Indicator blinks rapidly for two secs, then remains on for about 23 secs.

Rolling code transmitter

2012 TSX5D-31TL7610.book 174

Training a Button

1. Position the remote transmitter you wish to link 1 to 3 inches (3-8 cm) from the HomeLink button you want to program.

2.

3.

Press and hold the desired HomeLink button and the button on the remote transmitter. Does the HomeLink indicator (LED) blink after 10 secs?

Press and hold the programmed HomeLink button for about a sec. Does the device (garage door opener) work?

a.

4.

5. a.

b.

Training Complete

Press and hold the HomeLink button again. The remote-controlled device should operate.

The remote has a rolling code. Press the learn button on the remote-controlled device (e.g. garage door opener).

Within 30 secs, press and hold the programmed HomeLink button for 2 secs.

Press and hold the HomeLink button again.

Training Complete

NO

Press and hold the remote and the HomeLink button at the same time. Then, while continuing to hold the HomeLink button, press and release the button on the remote every 2 secs. Dose the LED blink within 20 secs?

NOYES

YES NO

HomeLink LED is on.

HomeLink indicator blinks for 2 secs, then remains on.

YES

2012 TSX5D-31TL7610.book 175

Bluetooth HandsFreeLink

Featu

res

1Bluetooth HandsFreeLink

To use HFL, you need a Bluetooth-compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities: U.S.: Visit www.acura.com/handsfreelink, or call

(888) 528-7876.

Voice control tips: Aim the vents away from the ceiling and close the

windows, as noise coming from them may interfere with the microphone.

Press and release the button before giving a command. Speak clearly and naturally after a beep.

If the microphone picks up voices other than yours, the command may be misinterpreted.

A command that consists of several words can be spoken together. For example, say Call 123-456- 7890 at once.

When HFL is in use, navigation voice commands cannot be recognized.

To change the volume level, use the audio systems volume knob or the remote audio controls.

For models with the navigation system, see the Navigation System Manual for how to operate Bluetooth HandsFreeLink.

Bluetooth HandsFreeLink (HFL) allows you to place and receive phone calls using your vehicles audio system, without handling your cell phone.

Using HFL

(HFL Talk) Button: Press to give a command or answer a call.

(HFL Back) Button: Press to end a call, go back to the previous command, or cancel a command.

HFL Buttons

Models with navigation system

Models without navigation system

MicrophoneAudio Remote VOL (Volume) Buttons

(HFL Talk) Button

(HFL Back) Button

175Continued

uuBluetooth HandsFreeLinkuUsing HFL

176

Featu res

1Bluetooth HandsFreeLink

Bluetooth Wireless Technology Bluetooth name and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.

HFL Limitations An incoming call on HFL will interrupt Bluetooth Audio when it is playing. Audio will resume when the call is ended.

1Information Display

The information that appears on the multi- information display varies between phone models.

2012 TSX5D-31TL7610.book 176

To hear general HFL information and help, say Tutorial. Say Hands free help or Help any time to get help or hear a list of commands.

The multi-information display notifies you when there is an incoming call.

Help Features

Information Display

Signal Strength

HFL Mode Battery Level Status

Roam Status Phone Number

uuBluetooth HandsFreeLinkuHFL Menus

2012 TSX5D-31TL7610.book 177

HFL Menus The ignition switch must be in ACCESSORY (q or ON (w to use HFL.

Featu res

To use HFL, you must first pair your Bluetooth-compatible cell phone to the system while the vehicle is parked.

Press the (HFL Talk) button each time you give a command

Set pairing code

Pair a phone to the system.

Edit the name of a paired phone.

Delete a paired phone from the system.

Hear a list of all phones paired to the system.

Hear which paired phone is linked, and its remaining battery life.

Search for another phone that has been paired.

Set the pairing code to either Fixed or Random.

Say a phone number.

Say a name after a phonebook entry is stored.

Redial the last number called.

Transfer a call from HFL to your phone or from your phone to HFL.

Mute your voice to the person at the other end of the call.

Send numbers or names during a call.

Pair

Edit

Delete

List

Status

Next phone

e.g.: 123-456-####

e.g.: Jim Smith

Phone setup

Call/Dial

Transfer

Mute

Send

Redial

177Continued

178

uuBluetooth HandsFreeLinkuHFL Menus

Featu res

2012 TSX5D-31TL7610.book 178

Change passcode

Store a phonebook entry.

Edit the number of an existing phonebook entry.

Delete a phonebook entry.

Hear a list of all stored phonebook entries.

Transfer contacts from your phone to HFL.

Apply a security passcode to the system that must be input at each key cycle to access the system.

Change your security passcode.

Set how you want to be notified of an incoming call.

Set to automatically transfer calls from your phone to HFL when you enter the vehicle.

Hear a tutorial for general rules on using the system.

Hear a list of available commands and additional information describing each command.

Store

Edit

Delete

List

Receive contact*

Security

Call notification

Auto transfer

Phonebook

System setup

Tutorial

Hands-free help

Clear the system of all paired phones, phonebook entries, and security passcode.

Clear

* Not available on all models

uuBluetooth HandsFreeLinkuHFL Menus Featu

res

1Phone Setup

Press the button and wait for a beep before giving a command.

Your Bluetooth-compatible phone must be paired to HFL before you can make and receive hands-free calls.

Phone Pairing Tips: You cannot pair your phone while the vehicle is

moving. Your phone must be in the discovery or search

mode when pairing the phone. Refer to your phones manual.

Up to six phones can be paired. Your phones battery may drain faster when it is

paired to HFL. If your phone is not ready for pairing or not found

by the system within three minutes, the system will time out and returns to idle.

2012 TSX5D-31TL7610.book 179

To pair a cell phone 1. If no phone has been paired to the system before, HFL gives you information

about how to pair the first phone. If a phone has already been paired: say Phone Setup and Pair after the HFL prompts.

2. Follow the HFL prompts and put your phone in discovery or search mode. u HFL gives you a four-digit code and begins searching for your phone.

3. When your phone finds a Bluetooth device, select HFL from the options and enter the four-digit code.

4. Follow the HFL prompts and name the newly paired phone.

To rename a paired phone 1. Say Phone Setup. 2. Say Edit after the prompts. 3. Follow the HFL prompts and rename the phone. u If there is more than one phone paired to the system, HFL will ask you which

phones name you want to change.

To delete a paired phone 1. Say Phone Setup. 2. Say Delete after the prompts. 3. Follow the HFL prompts. u HFL will ask you which phone you want to delete.

Phone Setup

Continued 179

uuBluetooth HandsFreeLinkuHFL Menus

180

Featu res

1Phone Setup

If no other phones are found or paired when trying to switch to another phone, HFL will inform you that the original phone is linked again.

The Status and Next Phone commands use: Only one paired phone at a time can be linked to HFL. When there are two or more paired phones in the vehicle, the first paired phone that the system finds is linked.

2012 TSX5D-31TL7610.book 180

To hear the name of all paired phones 1. Say Phone Setup. 2. Say List after the prompts. 3. HFL reads out all the paired phones names.

To hear which paired phone is currently linked 1. Say Phone Setup. 2. Say Status after the prompts. 3. HFL will tell you which phone is linked with the system.

To change the currently linked phone 1. Say Phone Setup. 2. Say Next Phone after the prompts. 3. HFL disconnects the current phone, and searches for another paired phone. 4. Once another phone is found, it is connected to the system. HFL will inform you

which phone is now linked.

To change the pairing code setting 1. Say Phone Setup. 2. Say Set Pairing Code after the prompts. 3. If you want HFL to create a random code each time you pair a phone, say

Random. If you want to create your own four-digit code, say Fixed. 4. Follow the HFL prompts.

uuBluetooth HandsFreeLinkuHFL Menus Featu

res

1Making a Call

Press the button and wait for a beep before giving a command.

HFL uses a Class 2 Bluetooth, with has a maximum range of about 30 feet (10 meters).

HFL allows you to talk up to 30 minutes after you remove the key from the ignition switch. However, this may weaken the vehicles battery.

2012 TSX5D-31TL7610.book 181

You can make calls using any phone number or a name in the HFL phonebook, and redial the last number called.

Direct dialing a phone number 1. Say Call or Dial. 2. Say the number you want to dial after the prompts. 3. Say Call or Dial after the prompts.

From the HFL phonebook 1. Say Call or Dial. 2. Say the name stored in the HFL phonebook after the prompts. 3. Follow the HFL prompts.

To redial the last number called by HFL Say Redial.

To end a call Press the (HFL back) button.

Making a Call

Continued 181

uuBluetooth HandsFreeLinkuHFL Menus

182

Featu res

1Receiving a Call

Call Waiting Press the button and put the original call on hold to answer the incoming call.

Press the button again to return to the original call.

Ignore the incoming call if you do not want to answer it.

Press the button if you want to hang up the original and answer the incoming call.

1Sending Numbers or Names During a Call

Press the button before a command.

To send a , say Pound. To send a , say Star.# *

2012 TSX5D-31TL7610.book 182

Press the button to answer the call, or the button to hang up. When there is an incoming call, a call notification (if activated) sounds and a message appears on the display.

You can transfer a call from HFL to your phone, or from your phone to HFL. Press the button and say Transfer.

To mute or unmute your voice during a call, press and release the button and say Mute.

You can send numbers and names during a call. This is useful when calling a menu- driven phone system.

To send a number or name during a call 1. Say Send. 2. Say the number or name you want to send after the prompts. 3. Follow the HFL prompts.

Receiving a Call

Transferring a Call

Muting a Call

Sending Numbers or Names During a Call

uuBluetooth HandsFreeLinkuHFL Menus Featu

res

1HFL Phonebook

Avoid using duplicate name entries. Avoid using home as a name entry. It is easier for HFL to recognize a multisyllabic or

longer name. For example, use Peter instead of Pete, or John Smith instead of John.

2012 TSX5D-31TL7610.book 183

You can store up to 50 names with their associated numbers in HFL. The numbers you store can be account numbers or passwords. These numbers can be sent to an automated phone system.

To store a phonebook entry 1. Say Phonebook. 2. Say Store after the prompts. 3. Say a name you want to list as your phonebook entry. 4. Say the number you want to store for the name entry. 5. Follow the HFL prompts and say Enter to store the entry.

To edit the number stored for a name 1. Say Phonebook. 2. Say Edit after the prompts. 3. Say a name you want to edit. When asked, say the new number for that name. 4. Follow the HFL prompts and say Enter to store the entry.

HFL Phonebook

Continued 183

184

uuBluetooth HandsFreeLinkuHFL Menus

Featu res

2012 TSX5D-31TL7610.book 184

To delete a name 1. Say Phonebook. 2. Say Delete after the prompts. 3. Say a name you want to delete. 4. Say Yes, and follow the HFL prompts.

To list all names in the phonebook 1. Say Phonebook. 2. Say List after the prompts. 3. HFL begins reading the names in the order they were stored. 4. When you hear a name you want to call, say Call.

To store a specific phone number from your cell phone directly to the HFL phonebook*

1. Say Phonebook. 2. Say Receive Contact after the prompts. 3. Follow the HFL prompts, select a number from your cell phone, and send it to HFL. u If it is not the number you want to store, say Discard.

4. Say the name for that number. 5. Follow the HFL prompts to continue.

* Not available on all models

uuBluetooth HandsFreeLinkuHFL Menus Featu

res

1System Setup

Press the button before a command.

Once a passcode is set, you are required to enter the passcode with every new key cycle to use HFL. If you forget the code, go to your dealer to have the passcode reset. You can also cancel the passcode by clearing all the data stored in the HFL system.

2 To clear the system P. 186

The default setting of the incoming notification is a ring tone.

2012 TSX5D-31TL7610.book 185

This command group allows you to change or customize HFL basic settings.

To set a four-digit passcode to lock the HFL system for security 1. Say System Setup. 2. Say Security. 3. Follow the HFL prompts and say the four-digit number of your choice. 4. Follow the HFL prompts and confirm the number.

To change the security passcode 1. Say System Setup. 2. Say Change Passcode after the prompts. 3. Say the new four-digit passcode after the HFL prompts. 4. Follow the HFL prompts.

To select a ring tone or a prompt as the incoming call notification 1. Say System Setup. 2. Say Call Notification after the prompts. 3. Say Ring Tone or Prompt after the prompts. For no audible notification, say

Off.

System Setup

Continued 185

uuBluetooth HandsFreeLinkuHFL Menus

186

Featu res

1System Setup

Press the button before a command.

You can clear the system when you have forgotten the passcode and cannot access HFL. When HFL asks you for the passcode, say System Clear.

2012 TSX5D-31TL7610.book 186

To activate or deactivate the auto transfer function The call on your cell phone can be automatically transferred to HFL when you get into the vehicle and turn on the ignition. 1. Say System Setup. 2. Say Auto Transfer after the prompts. HFL lets you know the current status. 3. Follow the HFL prompts to change the setting.

To clear the system Paired phones, all stored or imported phonebook data, and any passcodes are erased. 1. Say System Setup. 2. Say Clear after the prompts. 3. Follow the HFL prompts.

2012 TSX5D-31TL7610.book 187

Compass*

Featu

res

1Compass*

Compass operation can be affected under the following conditions: Driving near power lines or stations Crossing a bridge Passing a large vehicle, or driving near a large

object that can cause a magnetic disturbance When accessories such as antennas and roof racks

are mounted by magnets

1Compass Calibration

Calibrate the compass in an open area.

While setting the compass: The RETURN button returns to the previous screen. The MENU button cancels the setting mode.

When you turn the ignition switch to ON (w , the compass self-calibrates, and the compass display appears.

Compass Calibration If the compass indicates the wrong direction, or the CAL indicator blinks, you need to manually calibrate the system.

1. Turn the ignition switch to ON (w . 2. Press and hold the MENU button until the

display shows the compass setting menu list.

3. Rotate to select CALIBRATION, then press .

4. When the display changes to PUSH CAL START, press .

5. Drive the vehicle slowly in two circles. u The compass starts to show a direction

after the calibration. The CAL indicator goes off.

Compass Setting Menu Items

187* Not available on all models

188

uuCompass*uCompass Zone Selection

Featu res

1Compass Zone Selection

The zone selection is done to compensate the variation between magnetic north and true north.

If the calibration starts while the audio system is in use, the display returns to normal after the calibration is completed.

2012 TSX5D-31TL7610.book 188

Compass Zone Selection 1. Turn the ignition switch to ON (w . 2. Press and hold the MENU button until the

display shows the compass setting menu list.

3. Rotate to select ZONE, then press . The display shows the current zone number.

4. Rotate to select the zone number of your area (See Zone Map), then press .

Zone Number

1

2

3

4

5

6

7 8 9

10

11

12

13

14 15

Zone Map

Guam Island: Zone 8 Puerto Rico: Zone 11

2012 TSX5D-31TL7610.book 189

Driving

This chapter discusses driving, refueling, and information on items such as accessories.

Before Driving Driving Preparation .......................... 190 Maximum Load Limit........................ 193

Towing a Trailer Towing Preparation.......................... 195 Driving Safely with a Trailer .............. 197 Towing Your Vehicle ........................ 198

When Driving Starting the Engine .......................... 199 Precautions While Driving................. 201 Automatic Transmission ................... 202 Shifting............................................ 203

Cruise Control ................................. 207 VSA (Vehicle Stability Assist), aka ESC

(Electronic Stability Control), System ...... 210 TPMS (Tire Pressure Monitoring System)... 212 Tire Pressure Monitoring System (TPMS) - Required Federal Explanation........... 214

Braking Brake System ................................... 216 ABS (Anti-lock Brake System) ........... 218 Brake Assist System.......................... 219

Parking Your Vehicle When Stopped................................. 220 Parking ............................................ 220