Contents

Acura RDX 2018 SUV Navigation Manual PDF

1 of 359
1 of 359

Summary of Content for Acura RDX 2018 SUV Navigation Manual PDF

2018 NAVIGATION MANUAL

The information and specifications included in this publication were in effect at the time of approval for printing. Honda Motor Co., Ltd., reserves the right, however, to discontinue or change specifications or design at any time without notice and without incurring any obligation.

Accessories Precautions

The GPS antenna is located in the roof. Trees, tall buildings, freeway/highway overpasses, tunnels, or overhead electrical power wires can easily interrupt or interfere with GPS reception.

Signal noise from devices such as radar detectors, vehicle tracking devices, remote starters, and additional amplifiers can disrupt the navigation system. If you install any such item, install it away from the navigation display and antenna.

Important Safety Information

Avoid focusing on the screen or manually operating the system controls while driving.

Enter information before you begin driving or when stopped. As you drive, listen to the audible instructions and use voice commands when possible. Pull to the side of the road if you need more time to look at the screen or operate the controls.

Route guidance may conflict with street closures, road construction, detours, and out-of-date map data.

The system itself may also have limitations. Verify route information by carefully observing roads, signs, and signals. Always use your own judgment and obey traffic laws.

2 System Limitations P. 334

NOTICE This vehicles navigation display, if so equipped, includes mercury-containing components. Upon removal, please reuse, recycle, or dispose of as hazardous waste. Clean the screen with a soft, damp cloth. You may use a mild cleaner intended for use on navigation screens.

3 WARNING Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed.

Only operate system controls when the conditions permit you to safely do so.

18 ACURA RDX NAVI-31TX48500.book 0

00X31-TX4-8500 2018 RDX Navigation Manual BNM-05468

18 ACURA RDX NAVI-31TX48500.book 1

Contents Quick Reference Guide

2 System Setup P. 19

Start-up 20 Voice Control System 22 Interface Settings 26 Personal Information 38 Routing 53 Guidance 62 Map 69 On Demand Multi-Use DisplayTM 87 Customized Features 88 Data Reset 113

2 Navigation P. 115 Entering a Destination 116 Calculating the Route 141 Driving to Your Destination 144 Map Menu 151 Changing Your Route 159 Changing Your Destination 168 Resuming Your Trip 171

2 Audio P. 173 Audio System 174 Audio Remote Controls 179 Audio Settings 181 Playing FM/AM Radio 184 Playing SiriusXM Radio 190 Playing a Disc 205 Playing Hard Disc Drive (HDD) Audio 212 Playing an iPod 224 Playing Internet Radio 236 Playing a USB Flash Drive 241 Playing Bluetooth Audio 247

2 Bluetooth HandsFreeLink P. 251 Bluetooth HandsFreeLink 252 Text/E-mail Message 285 Roadside Assistance 292 HFL Menus 293

2 AcuraLink Messages P. 297 AcuraLink 298

2 Other Features P. 309 Trip Computer 310 Calendar 311 Information Functions 312 Multi-View Rear Camera 314

2 Troubleshooting P. 315 Troubleshooting 316 Error Messages 323

2 Reference Information P. 331 System Initialization 332 System Limitations 334 Client Assistance 336 Legal Information 339

2 Voice Commands P. 345 Voice Commands 346

P. 2

System Setup P. 19

Navigation P. 115

Audio P. 173

Bluetooth HandsFreeLink P. 251

AcuraLink Messages P. 297

Other Features P. 309

Troubleshooting P. 315

Reference Information P. 331

Voice Commands P. 345

Index P. 351

2

Q u

ick R eferen

ce G u

id e

18 ACURA RDX NAVI-31TX48500.book 2

Quick Reference Guide

OverviewFunctions at a Glance Navigation You can select any place/landmark as a destination by using voice control or the Interface Dial. The navigation

system gives you turn-by-turn driving directions to your destination.

Store home address (P46) Register 1 home address.

Track route (P144) Follow your route in real-time with voice guidance.

AcuraLink Real-Time TrafficTM (P156)

Bypass congestion and traffic incidents.

Subscription service

Store contacts (P39) Store up to 200 contacts in 2 address books.

Enter destination (P116) Select your destination using 13 methods.

Select route (P143) Set route preferences and select one of 3 routes.

Avoid certain areas (P60) Set streets and areas to detour around.

Add waypoints (P161) Add up to 4 pit stops along your route.

3

Q u

ick R eferen

ce G u

id e

18 ACURA RDX NAVI-31TX48500.book 3

Helps you check for obstacles around the rear of your vehicle on the audio/information screen when reversing.

Audio The advanced audio system provides clear, well-defined sound and makes the most of your music. Enjoy listening to a variety of audio sources, such as:

Other Features Multi-View Rear Camera (P314)

FM/AM Radio (P184)

SiriusXM Radio (P190)

Compact Disc (P205)

Hard Disc Drive (HDD) (P212)

iPod (P224)

Internet Radio (P236)

Bluetooth Audio (P247)

USB Flash Drive (P241)

AcuraLink (P298)

AcuraLink provides you with important information and messages between your vehicle and Acura.

Voice Control (P22)

Use voice commands for safer system control while driving. You can operate all key functions of the navigation, audio, Bluetooth HandsFreeLink, and climate control systems.

Bluetooth HandsFreeLink (P252)

Pair a compatible mobile phone to receive incoming and make outgoing calls. You can operate the phone features without ever taking your hands off the wheel.

4

Q u

ick R eferen

ce G u

id e

18 ACURA RDX NAVI-31TX48500.book 4

System Controls

On Demand Multi-Use DisplayTM

Navigation Screen

Audio Navigation

Voice Control Bluetooth HandsFreeLink

li AUDIO Button (P174)

lb Microphone (P252)

ld MODE Button (P179)

6 Interface Dial/ENTER Button (P7)

4 BACK Button

7 INFO Button lf (Pick-Up) Button (P252)

8 MENU Button

9 SETTINGS Button

3 NAV Button

1 PHONE Button (P252)

lg (Hang-Up/Back) Button (P252)

lh (Talk) Button (P6)

5 (Display Mode) Button (P74)

le CH Button (P180)

2 (Power) Button/ Volume Knob

la (Eject) Button

lc VOL Button (P179)

5

Q u

ick R eferen

ce G u

id e

18 ACURA RDX NAVI-31TX48500.book 5

On Demand Multi-Use DisplayTM Basic Operation ShortcutsAudio Source More

Places (P44)

Phone (P265)

Audio (P177)

Select to change an audio source.

You can change the position of icons.

Select to display the menu items.

FM/AM/SiriusXM/Pandora*/AhaTM

:

:

Select the preset station (FM/AM/Pandora*/Aha). Select to search that category/channel on the tune screen (SiriusXM). Select and hold to search that station/channel on the preset screen (AM/FM/SiriusXM). Select and hold to search up or down 10 channels on the tune screen (SiriusXM). Select to search the selected band for a station with a strong signal. (AM/FM) Select the channel. In channel mode, select and hold to change the channel rapidly. (SiriusXM) Select to skip to the next/previous channel on the tune screen. Select and hold to fast-forward/fast-rewind the current selection on tune screen (SiriusXM). Select a song (Pandora*) or contents (Aha).

Select and hold a desired number where you want to store the station/channel. Select to listen to a preset station/channel.

Select Tune.

Select Presets.

Pandora is available on U.S. models only.*:

Select to display the shortcut menu.

CD/HDD/USB flash drive/Bluetooth Audio :

:

Select to skip to the next folder, and to skip to the beginning of the previous folder.

Select to change tracks. Select and hold to move rapidly within a track.

iPod Album bar:

: Select an album.

Select to change tracks. Select and hold to move rapidly within a track.

6

Q u

ick R eferen

ce G u

id e

18 ACURA RDX NAVI-31TX48500.book 6

Voice Control Operation

Voice Portal Screen

a Press and release the (Talk) button on the top screen of any mode. The system prompts you to say a voice command and gives examples. Press and release the (Talk) button again to bypass this prompt.

The system beeps when ready for a command. Press the (Hang-Up/ Back) button to cancel.

Available voice commands are highlighted on the screen.

b Say a voice command. After that, follow the voice prompt and say a voice command.

The audio system is muted during voice control mode.

You can use other voice commands on the Voice Portal screen. The system recognizes only certain commands. Available navigation voice commands (P346)

Say Voice Help to enter supported commands for the current screen. A voice help tutorial is also available. Voice Help (P15)

During the voice control mode, press and hold the (Hang-Up/Back) button to return to the Voice Portal screen.

Set Voice Prompt to Off to bypass the voice prompt. Voice Recognition Settings (P24)

Carefully read the usage note for the voice control. Voice Control System (P22)

7

Q u

ick R eferen

ce G u

id e

18 ACURA RDX NAVI-31TX48500.book 7

Interface Dial/ENTER Button Operation

Rotate dial

Changes scale Map screens

Press ENTER

Selects function Selects map icon Map screens

Move

up down left rightHighlights menu options Menu screens Selects highlighted option

Menu screens

Selecting Icon

You will see these icons in each chapter. They represent how you can operate the Interface Dial.

Move up Move left Move right

Scrolls map (8 directions) Map screens

Selects labeled function Menu screens

Rotate dial

Press ENTER

Move down

8

Q u

ick R eferen

ce G u

id e

18 ACURA RDX NAVI-31TX48500.book 8

How to Enter Information You can enter information (e.g., city names, street names, personal names, and business names comprising letters, numbers, and symbols) when prompted on input screen.

Using the Interface Dial Rotate to highlight a character.

Select to display upper/lower case characters.

Select to display symbols and accented characters.

Select (or move ) to edit the entered characters.

Press to enter the highlighted character.

Move to select Space to enter a space character.

Move to select Delete to remove the last entered character.

You can also use the touchscreen to enter information.

Scrolling through lists or tabs is limited while the vehicle is moving.

Certain screen functions are limited or inoperable while the vehicle is moving. For these functions, use available voice commands or pull over to proceed.

Number of Hits

On input search screens, the number of hits in the map database is displayed. Move to select OK to display a list of possible entries.

9

Q u

ick R eferen

ce G u

id e

18 ACURA RDX NAVI-31TX48500.book 9

Map Screen Legend

GPS signal strength

Best reception

Feature areas

Park

Streets

Map scale (P81)

No icon: Poor/No reception

Good reception

Hospital Shopping Mall Golf Course

Airport/Business Water Area Cemetery University

Current street nameCurrent vehicle position (P79)

Freeways/highways

State routes

Verified streets

Unverified streets

One-way streets

Acura dealer

AcuraLink Message icon (P14)

AcuraLink signal indicator (P307)

Landmark icons (P71)

Honda dealer (U.S.)

Honda dealer (Canada)

School Parking lot

Gas station

Hospital

Post office

Restaurant

Freeway exit information (U.S.) / Highway exit information (Canada)

Parking garage

Grocery store

Hotel/Lodging

ATM

Map orientation (P76)

North up

Current map scale

Heading up

3D map

10

Q u

ick R eferen

ce G u

id e

18 ACURA RDX NAVI-31TX48500.book 10

During Route Guidance During route guidance, route information is displayed on the map screen and guidance screen.

Press the NAV button to toggle between the map and guidance screen.

Map Screen

Guidance Screen

Guide to destination or waypoint

Estimated time to destination (waypoint)

Distance to destination (waypoint) Distance of the actual route. Waypoint (P161)

Tracking dots (P148)

Next guidance indicator Distance to the next guidance point. Calculated route (unverified roads) (P146)

Destination icon

Calculated route (P144)

Guide to destination or waypoint

Estimated time to destination (waypoint)

Distance to destination (waypoint) Distance of the actual route.

Guidance point

Guidance point

No entry icon

Guidance indicator Street name of guidance point and distance to the guidance point.

Lane guidance

Day or Night Mode Press the (Display Mode) button to manually switch between day and night mode.

Turn-by-Turn Directions The next guidance point appears on the multi-information display.

Day mode Night mode

Multi-information Display

Remaining distance

Street name of next guidance point

Next driving maneuver is approaching

Q u

ick R efe

18 ACURA RDX NAVI-31TX48500.book 11

NavigationHome Addresses and Going Home The Home feature automatically routes you to your home address from any location simply by selecting Go Home.

11

ren ce G

u id

e

Storing Your Home Address

a Press the SETTINGS button.

b Rotate to select Navi Settings. Press .

c Rotate to select Edit Go Home. Press .

d Rotate to select Name. Press .

e Enter a name.

f Rotate to select Address. Press .

g Enter an address.

h Rotate to select Phone No. Press .

i Enter a phone number.

j Move and rotate to select OK. Press .

Going Home

a From the map screen, press the MENU button.

b Rotate to select Go Home. Press .

c Rotate to select Set as Destination. Press .

12

Q u

ick R eferen

ce G u

id e

18 ACURA RDX NAVI-31TX48500.book 12

NavigationEntering a Destination Enter your destination using one of several methods, then follow route guidance on the map or guidance screen to your destination.

a From the map screen, press the MENU button.

b Rotate to select Address. Press .

c Rotate to select Street. Press .

d Enter the name of your destination street.

e Rotate to select your destination street from the list. Press .

f Enter the street number. Move to select OK when finished.

g If there is more than one city with the specified street, a list of cities is displayed. Rotate to select the desired city from the list. Press .

h Rotate to select Set as Destination. Press . Route guidance to the destination begins.

View Routes: Choose one of three routes.

Route Preference: Choose Max or Min for the five settings.

Q u

ick R efe

18 ACURA RDX NAVI-31TX48500.book 13

NavigationChanging Route or Destination You can alter your route by adding waypoints to visit, adding streets to avoid, or changing your destination during route guidance.

13

ren ce G

u id

e

Adding a Waypoint (Pit Stop) You can add up to four waypoints along your route. (P161)

a From the map screen, press the MENU button.

b Rotate to select Destination List. Press .

c Rotate to select Add New Destination. Press .

d Rotate to select Find Along Route. Press .

e Rotate to select location and search method. Press .

Search Around: Search around a location.

Search Along: Search between two locations.

Changing Your Destination There are several methods you can use to specify a new destination during route guidance.

Selecting an icon on the map (P169) Scroll the map to position the cursor over a place/landmark icon or a new area on the map. Press twice.

Entering a new destination (P170) Press the MENU button. Move to select Destination and enter a new destination.

f Select the icon category and location to add to the Destination List when prompted. Edit the order of destinations if necessary.

g Move and rotate to select Start Route. Press .

Canceling Your Route

a Press the MENU button.

b Rotate to select Cancel Route. Press .

14

Q u

ick R eferen

ce G u

id e

18 ACURA RDX NAVI-31TX48500.book 14

AcuraLink AcuraLink Messages AcuraLink provides a direct communication link between you and Acura. It sends and receives several kinds of messages through the Acura server.

AcuraLink Real-Time TrafficTM

Displays continuously updated traffic information and recalculates your route in response to traffic flow, incidents, or road closures. (P156)

The following features are available:

Vehicle feature guide

Operating quick tips

Safety and maintenance information

Diagnostic information

Dealer appointment and maintenance reminders

Traffic information available

Traffic information off or map scale too large

No icon: Out of coverage area

Traffic incident icons

Traffic status indicator (P156)

Traffic flow indicator Congestion

Incident

Weather Heavy Moderate

Free-flow

Construction

Road Closed

NOTE: AcuraLink Real-Time TrafficTM is a subscription service. For more information, contact an Acura dealer or visit owners.acura.com (U.S.) or www.acura.ca/owners/acuralink (Canada).

Q u

ick R efe

18 ACURA RDX NAVI-31TX48500.book 15

Voice Help This navigation system comes with voice help, which shows you what command to say when using the voice command functions.

15

ren ce G

u id

e

Command Help

a Press and release the (Talk) button.

b Say Voice Help.

The voice help screen is displayed. The Voice Help command is available on most screens.

c Say one of the options for a list of available commands by category (e.g.,

Navigation Commands).

d Say one of the options for a list of available commands by category (e.g.,

Find Place Commands).

e The system displays a list of all available commands for the category. Press to hear the list read aloud.

Getting Started Tutorial

a Move and rotate to select Getting Started on the voice help screen. Press .

For Voice Settings and All Commands. (P24, 346)

b The system reads the tips for the voice control.

Rotate to read the tips.

Move or to display the previous/next page.

16

Q u

ick R eferen

ce G u

id e

18 ACURA RDX NAVI-31TX48500.book 16

Troubleshooting For more Information (P315)

Why does the vehicle position icon on the map lag a short distance behind my actual position, especially at intersections?

This is normal. The navigation system is unaware of the width of intersections. Large differences in vehicle position can indicate a temporary loss of the GPS signal.

Why does the time to destination display sometimes increase even though I am getting closer to my destination?

The time to destination is based on your actual road speed and traffic conditions to give you a better estimate of arrival time.

How do I specify a destination when an entered city or street could not be found?

Try entering the street first. Some cities are lumped in with a major metro area. In rural unverified areas or new subdivisions, streets may be missing or only partially numbered.

How do I turn on the navigation system voice guidance?

On the map screen, press to display the Map Menu. Rotate to select Guidance Volume. Adjust the preferred volume level.

My battery was disconnected or went dead, and the navigation system is asking for a code. Where do I find it?

In most cases, you do not need to enter a code. Simply press and hold the (Power) button for two seconds; the system should reactivate.

2 System Initialization P. 332

18 ACURA RDX NAVI-31TX48500.book 17

17

How to Use This Manual This section explains different methods on how you can easily find information in this manual.

Searching the Table of Contents (P1)

First, find the general chapter related to what you are looking for (e.g., entering a destination from the Address Book). Then, go to that chapter to view a more specific table of contents.

Searching the Index (P351)

This more detailed table of contents shows you exactly what information is listed by section and title.

The Index consists of main terms and sub-entries. The sub-entries help you get to the desired page depending on what you are looking for.

Table of Contents Chapter Contents

Navigation Screen Index

Two types of Tables of Contents help you find your desired information.

Menu items displayed on the navigation screen (e.g., Address Book) can be found individually in the Index.

More Detailed Contents

Go to the Next page

18

18 ACURA RDX NAVI-31TX48500.book 18

Press the hard button on the system control panel.

Menu Tree

The menu tree helps guide you through the system's menu options. To get to your desired function, follow the menu tree in order of the steps shown.

All menu options can also be activated with voice commands.

Press the MENU button.

Select the menu option with the Interface Dial.

After following the menu tree, step-by-step instructions explain how to achieve the desired result.

Sample pages and images in this section may differ from the actual ones.

Rotate to select Address Book. Press .

MENU button Address Book

18 ACURA RDX NAVI-31TX48500.book 19

System Setup

This section describes the start-up procedure and the navigation and setup functions.

19

Start-up ................................................... 20 Voice Control System ............................. 22

Command Input .................................... 22 Voice Recognition .................................. 23 Voice Recognition Settings ..................... 24 Siri Eyes Free .......................................... 25

Interface Settings ................................... 26 Personal Information.............................. 38

Address Book......................................... 39 Home Address ....................................... 46 PIN Numbers .......................................... 47 Previous Destination............................... 48 Category History .................................... 49 Download POI........................................ 50

Routing .....................................................53 Route Preference ....................................54 Unverified Routing ..................................56 Traffic Rerouting .....................................58 Edit POI Search Radius Along Route ........59 Avoided Area..........................................60

Guidance ..................................................62 Guidance Mode ......................................63 Street Name Guidance ............................65 Non-map Screens....................................66 Guidance Point .......................................67 Estimated Time .......................................68

Map...........................................................69 Showing Icons on Map ...........................71

Color ..................................................... 73 View (Map Orientation) .......................... 76 3D Angle Adjustment............................. 77 Straight Line Guide ................................ 78 Current Location .................................... 79 Map Legend........................................... 80 Display Tracking ..................................... 84 Correct Vehicle Position ......................... 86

On Demand Multi-Use DisplayTM ........... 87 Changing the Screen Settings ................ 87

Customized Features .............................. 88 Data Reset ............................................. 113

Defaulting All the Settings.................... 113

20

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 20

Start-up

1 Start-up

If the navigation system loses power at any time, you may need to press and hold the (Power) button for more than two seconds, or you may be prompted for the five-digit security code.

2 System Initialization P. 332

At start-up, the drivers keyless access remote is automatically detected and the address book settings, setup preferences, wallpapers, and audio settings for that driver (e.g., Driver 1) are loaded.

OK on the Confirmation screen cannot be selected by using a voice command.

The first time the NAV or any other mode button is pressed after you set the power mode to ACCESSORY or ON, a message guiding you to its menu screen is displayed.

The navigation system starts automatically when you set the power mode to ACCESSORY or ON. At start-up, the following Confirmation screen is displayed.

1. Press to select OK. u If you do not select OK, the

map screen is displayed after a certain period of time.

u Your current position is displayed on the map screen.

2. Press the NAV button if a different mode is selected. u Your current position is

displayed on the map screen.

uuStart-upu System

Setu p

18 ACURA RDX NAVI-31TX48500.book 21

Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayed-out option using the Interface Dial until the vehicle is stopped.

Voice commands are still operable while the vehicle is in motion.

Limitations for Manual Operation

Disabled option

21

22

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 22

Voice Control System

1 Voice Control System

When you press the (Talk) button, the system prompts you to say a voice command and gives examples. Press and release the (Talk) button again to bypass this prompt and give a command.

1 Command Input

The audio system is muted while using the voice control system.

Your vehicle has a voice control system that allows hands-free operation of most of the navigation system functions. The voice control system uses the (Talk) and (Hang-Up/Back) buttons on the steering wheel and a microphone near the map lights on the ceiling. A Getting Started feature provides a tutorial that explains how to use the voice control system.

2 Getting Started Tutorial P. 15

Command Input If the system does not understand a command or you wait too long to give a command, the system asks you to repeat the command. When you give a command, the system generally either repeats the command as a confirmation or asks you for further information. If you do not wish to hear this feedback, you can turn it off. However, listening to the feedback will help familiarize you with the way the system expects commands to be phrased. If the system cannot perform a command or the command is not appropriate for the screen you are on, the system beeps. On character input screens, a list of possible characters is displayed if the system does not recognize your command. You can find out which voice commands are available for a particular screen using the Voice Help command. The system will display and read the list of available commands to you.

2 Voice Help P. 15

uuVoice Control SystemuVoice Recognition System

Setu p

1 Voice Recognition

The voice control system can only be used from the drivers seat because the microphone unit removes noises from the front passengers side.

18 ACURA RDX NAVI-31TX48500.book 23

Voice Recognition To achieve optimum voice recognition when using the navigation voice control system: Make sure the correct screen is displayed for the voice command that you are

using. The system recognizes only certain commands. Available navigation voice command.

2 Voice Commands P. 346

Close the windows and moonroof. Adjust the dashboard and side vents so air does not blow onto the microphone

on the ceiling. Speak clearly in a clear, natural speaking voice without pausing between words. Reduce any background noise and the climate controls fan speed if possible. The

system may misinterpret your command if more than one person is speaking at the same time.

Refer to the Voice Help feature. 2 Voice Help P. 15

23

24

uuVoice Control SystemuVoice Recognition Settings

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 24

Voice Recognition Settings H SETTINGS button u System Settings u Voice Reco

Rotate to select an item. Press .

The following items are available: Voice Prompt: Turns the voice prompt on or off.

On (factory default): Provides the voice prompts. Off: Disable the feature.

Song By Voice: Turns the Song By VoiceTM on or off. 2 Settings Song By VoiceTM (SBV) P. 231

Song By Voice Phonetic Modification: Modifies a voice command of music stored in the HDD or an iPod.

2 Phonetic Modification P. 233

Phonebook Phonetic Modification: Modifies a voice command for the phonebook.

2 Phonebook Phonetic Modification P. 268

Guidance Volume: Adjusts the voice prompt volume level. 2 Sound and Beep Settings P. 27

uuVoice Control SystemuSiri Eyes Free System

Setu p

1 Siri Eyes Free

iPhone and Siri are trademarks of Apple, Inc.

Siri Eyes Free is available only on iPhone with iOS 6.0 and above.

Some commands work only on specific phone features or apps.

Some features may not be available for all countries or all areas. For details about Siri, refer to http:// www.apple.com.

We recommend against using Siri other than in Eyes Free mode while operating a vehicle.

On Siri Eyes Free, the display remains the same and no feedback or commands appear.

While using Siri, you cannot operate the system with the built-in voice recognition.

18 ACURA RDX NAVI-31TX48500.book 25

Siri Eyes Free When your compatible iPhone is paired and linked to the system via Bluetooth, you can say Siri-related commands. Make sure Siri on your iPhone is turned on.

2 Pairing a Phone P. 255

1. Press and hold the (Talk) button for more than two seconds until you hear the Siri tone.

2. Talk to Siri. u When you hear the Siri tone,

you can continue to respond without pressing any button. If the Siri tone times out, you have to press and hold the (Talk) button again to reactivate Siri Eyes Free.

u Press the (Hang-Up/ Back) button to cancel Siri Eyes Free.

25

26

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 26

Interface Settings

1 Display Settings

You can set separate daytime and nighttime settings for Brightness, Contrast, and Black Level. Adjust each setting when the display is in either daytime or nighttime mode.

Display Settings H SETTINGS button u System Settings u Display

Adjusts the screens preferences. 1. Rotate to select an item. Press

. 2. Rotate to make the

adjustment. Press .

The following items are available: Sync Display Brightness: Selects whether the display brightness synchronizes

with the instrument panel brightness. Brightness: Adjusts the screens brightness. Contrast: Adjusts the screens contrast. Black Level: Adjusts the screens black level.

uu Interface SettingsuSound and Beep Settings System

Setu p

1 Sound and Beep Settings

Guidance Volume If you set Guidance Volume to 0, you will not hear route guidance or voice command confirmations. You can also adjust Guidance Volume by rotating the volume knob while the route guidance or voice command confirmations is announced.

If you then select Voice in the Map Menu, you will hear route guidance at the default volume.

18 ACURA RDX NAVI-31TX48500.book 27

Sound and Beep Settings H SETTINGS button u System Settings u Sound/Beep

Changes the system sound and beep settings. Rotate to select an item. Press

.

The following items are available: Guidance Volume: Adjusts the navigation system volume level. Verbal Reminder: Turns the verbal reminders on and off.

On: Sets the verbal reminders. Off: Disables the feature.

27

28

uu Interface SettingsuClock Adjustment

System Setu

p

1 Clock Adjustment

Auto Time Zone If you live and work in two different time zones, you may want to turn Auto Time Zone to OFF. When driving near a time zone boundary, the displayed time zone may fluctuate between the two zone times.

Auto Daylight This function is not activated in areas that have not adopted daylight saving time, even if you have set Auto Daylight to ON.

You can turn the clock display in the navigation screen on and off.

2 Header Clock Display P. 37

18 ACURA RDX NAVI-31TX48500.book 28

Clock Adjustment H SETTINGS button u System Settings u Clock

Set the automatic adjustment of the system clock for daylight saving and international time zones.

Rotate to select an item. Press .

The following items are available: Clock/Wallpaper Type: Changes the clock display type and the wallpaper type.

2 Setting the Clock Type P. 29

Clock Adjustment: Adjust the current time manually. 2 Setting the Clock P. 29

Clock Format: Sets the time notation to either 12-hour clock (12H, factory default) or 24-hour clock (24H).

Auto Time Zone: The navigation system automatically adjusts the clock when driving through different time zones. On (factory default): Adjusts the clock automatically. Off: Disables the feature.

Auto Daylight: The navigation system automatically adjusts the clock (spring ahead or fall back by one hour) when a daylight saving time change occurs. On (factory default): Adjusts the clock automatically. Off: Disables the feature.

Clock Reset: Resets the settings of all items in the Clock group.

uuInterface SettingsuClock Adjustment System

Setu p

18 ACURA RDX NAVI-31TX48500.book 29

H SETTINGS button u System Settings u Clock u Clock/Wallpaper Type u Clock

1. Rotate to select an option to change the design. Press .

2. Move to select OK. Press .

H SETTINGS button u System Settings u Clock u Clock Adjustment

1. Rotate to select an item. Press .

2. Rotate to select a minute. Press .

Setting the Clock Type

Setting the Clock

29

30

uu Interface SettingsuWallpaper Settings

System Setu

p

1 Wallpaper Settings

When importing wallpaper files, the image must be in the USB flash drives root directory. Images in a folder cannot be imported.

The file name must be fewer than 255 characters. The file format of the image that can be imported

is BMP (bmp) or JPEG (jpg). The individual file size limit is 10 MB. The maximum image size is 5,800 5,800 pixels. Up to 10 files can be saved for each driver (Driver 1

and Driver 2). If the USB flash drive does not have any pictures,

the No files detected message appears.

18 ACURA RDX NAVI-31TX48500.book 30

Wallpaper Settings Select, delete, and import wallpaper pictures for display on the screen.

H SETTINGS button u System Settings u Clock u Clock/Wallpaper Type

1. Connect the USB flash drive to the USB port.

2. Move to select Wallpaper. u The screen will change to the

wallpaper list. 3. Move and rotate to select

Add New Wallpaper. Press .

4. Rotate to select a desired picture. Press . u The preview is displayed on the

left side on the screen. 5. Move and rotate to select

Start Import. Press . u The confirmation message will

appear. Then the display will return to the wallpaper list.

Import Wallpaper

uu Interface SettingsuWallpaper Settings System

Setu p

1 Select Wallpaper

From the pop-up menu, rotate to select Preview and press to see a preview at full-size screen.

To go back to the previous screen, press to select OK, or press the BACK button.

When the file size is large, it takes a while to be previewed.

18 ACURA RDX NAVI-31TX48500.book 31

H SETTINGS button u System Settings u Clock u Clock/Wallpaper Type u Wallpaper

1. Rotate to select a desired wallpaper. Press . u The preview is displayed on the

left side on the screen. u The pop-up menu appears on

the screen.

2. Rotate to select Set. Press . u The display will return to the

wallpaper list.

Select Wallpaper

Continued 31

32

uu Interface SettingsuWallpaper Settings

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 32

H SETTINGS button u System Settings u Clock u Clock/Wallpaper Type u Wallpaper

1. Rotate to select a wallpaper that you want to delete. Press . u The preview is displayed on the

left side on the screen. u The pop-up menu appears on

the screen.

2. Rotate to select Delete. Press .

u The confirmation message will appear.

3. Rotate to select Yes. Press . u The display will return to the

wallpaper list.

Delete Wallpaper

uu Interface SettingsuUnit Settings System

Setu p

18 ACURA RDX NAVI-31TX48500.book 33

Unit Settings H SETTINGS button u System Settings u Others u Units

Sets the map units to either mile or km. Rotate to select the map unit. Press .

33

34

uu Interface SettingsuLanguage Settings

System Setu

p

1 Language Settings

Voice confirmation of cities and streets only occurs when English is the system language.

When Franais or Espaol is selected, some messages continue to be displayed in English.

18 ACURA RDX NAVI-31TX48500.book 34

Language Settings H SETTINGS button u System Settings u Others u Language

Set the system language used on all screens. You can choose from three languages: English, Franais (French), Espaol (Spanish).

Rotate to select the system language. Press .

uu Interface SettingsuVoice Command Tips System

Setu p

18 ACURA RDX NAVI-31TX48500.book 35

Voice Command Tips H SETTINGS button u System Settings u Others u Voice Command Tips

Alerts you when manual control of the system is disabled to prevent distraction while driving. Only voice commands are available.

Rotate to select the map unit. Press .

The following items are available: On (factory default): Displays a message. Off: Disables the message.

35

36

uu Interface SettingsuBackground Color

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 36

Background Color H SETTINGS button u System Settings u Others u Background Color

Changes the background color of the navigation screen and the On Demand Multi- Use DisplayTM.

Rotate to select a desired color. Press .

uu Interface SettingsuHeader Clock Display System

Setu p

18 ACURA RDX NAVI-31TX48500.book 37

Header Clock Display H SETTINGS button u System Settings u Others u Header Clock Display

Selects whether the clock display comes on. Rotate to select an option. Press

.

The following options are available: On (factory default): The system displays the clock in the navigation screen. Off: Disables the feature.

37

38

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 38

Personal Information

1 Personal Information

Personal information cannot be backed up or moved to another navigation system.

H SETTINGS button u Navi Settings u Personal Info

Use the personal information menu to select and set your address books, home address, and PINs. You can also delete unwanted destinations from the list of previously routed destinations.

Rotate to select an item. Press .

The following items are available: Address Book: Stores new addresses or edits your address book.

2 Address Book P. 39

Edit Go Home: Sets or edits your home address. 2 Home Address P. 46

PIN Number: Sets or changes your PIN. 2 PIN Numbers P. 47

Previous Destination: Deletes the destination history. 2 Previous Destination P. 48

Category History: Deletes the place categories you recently used. 2 Category History P. 49

Download POI: Edits and deletes the Imported POI categories. 2 Download POI P. 50

uuPersonal InformationuAddress Book System

Setu p

1 Address Book

Up to 200 addresses can be stored to each address book of Driver 1 and Driver 2 separately.

If you have PIN-protected your address book, enter your PIN when prompted. Press to select OK. PINs are optional.

2 PIN Numbers P. 47

Any address book categories you create are also displayed.

2 Selecting an Address Book Category P. 42

18 ACURA RDX NAVI-31TX48500.book 39

Address Book H SETTINGS button u Navi Settings u Personal Info u Address Book

Store up to 200 address entries in two address books (Driver 1 and Driver 2). You can add, edit, and delete information in the address books.

Move or to display only the addresses in the selected category. Move to change the user address book (Driver 1 or Driver 2).

39Continued

uuPersonal InformationuAddress Book

40

System Setu

p

1 Adding an Address Book Entry

If you do not give the address a name, one is automatically assigned (e.g., Address 001). You can re-enter, edit, or make changes to any entry. Address is the only required field.

18 ACURA RDX NAVI-31TX48500.book 40

H SETTINGS button u Navi Settings u Personal Info u Address Book

This section explains how to enter the name and address. 1. Move and rotate to select

Add New Address. Press .

2. Rotate to select an item. Press .

The following items are available: Name: Edits the name of the entry. Address: Edits the address of the entry. Phone No.: Edits the phone number of the entry. Category: Specifies the category of the entry.

Adding an Address Book Entry

uuPersonal InformationuAddress Book System

Setu p

1 Adding an Address Book Entry

When you use Place Name or Place Category, the phone number is automatically entered.

You can also add a phone number and category.

18 ACURA RDX NAVI-31TX48500.book 41

Alert: Alerts you when you approach the address entry. On: Beeps and displays a message when your vehicle gets near the entry. Off (factory default): Disables the feature.

3. Rotate to select Name. Press .

4. Enter a name or title. Move to select OK.

5. Rotate to select Address. Press .

6. Rotate to select an item for specifying the address. Press .

The following items are available: Address: Enter an address on the character input screen when prompted.

2 Address P. 118

Previous Destinations: Select a previous destination. 2 Previous Destination P. 126

Current Position: Select your current location. Place Category: Select a category to search for a place/landmark (e.g., Banking,

Lodging). 2 Place Category P. 127

Local Search: Sets a destination by using Local Search. 2 Local Search P. 129

Place Name: Enter the name of a place/landmark. 2 Place Name P. 131

More Search Methods: Displays additional search method entries. 2 Entering a Destination P. 116

Continued 41

uuPersonal InformationuAddress Book

42

System Setu

p

1 Editing an Address Book Entry

The entered contents are displayed on the Edit address screen.

1 Selecting an Address Book Category

Up to 100 categories (including Unfiled) can be stored to each address book of Driver 1 and Driver 2 separately.

If you delete a category that is used by other addresses, the category type for those addresses changes to Unfiled.

18 ACURA RDX NAVI-31TX48500.book 42

H SETTINGS button u Navi Settings u Personal Info u Address Book

1. Rotate to select the address to edit. Press .

2. Enter the name, address, phone number, and category fields.

2 Adding an Address Book Entry P. 40

3. Move and rotate to select OK. Press .

H SETTINGS button u Navi Settings u Personal Info u Address Book

1. Rotate to select an address. Press .

2. Rotate to select Category. Press .

3. Rotate to select a category. Press . u Create a category in advance.

2 Creating a new category P. 43

Editing an Address Book Entry

Selecting an Address Book Category

uuPersonal InformationuAddress Book System

Setu p

1 Deleting an Address Book Entry

When you transfer the vehicle to a third party, delete all address book entries.

18 ACURA RDX NAVI-31TX48500.book 43

Creating a new category 1. Move and rotate to select New Category. Press . 2. Enter a name and select an icon when prompted.

u The created category is displayed in the list of categories.

Deleting or Editing a category 1. Move and rotate to select Delete or Edit. Press . 2. Delete an existing category, or change the name and icon.

u The selected category to delete is indicated with a trash icon. Move and rotate to select OK.

H SETTINGS button u Navi Settings u Personal Info u Address Book

1. Rotate to select the address to delete. Press .

2. Move and rotate to select Delete. Press .

3. Rotate to select Yes. Press to delete the address.

Deleting an Address Book Entry

Continued 43

44

uuPersonal InformationuAddress Book

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 44

You can store up to six addresses previously stored in your Address Book, and a home address for your preset destinations.

Storing an address on the shortcut 1. Select Shortcuts. 2. Select Places. 3. Select Edit or No Entry.

u If you select No Entry, go to step 6.

4. Select Add. u All six preset icons appear.

5. Select the preset number to which you want to store an address. u The screen changes to a list of

addresses stored in your address book.

Setting Place Shortcuts

uuPersonal InformationuAddress Book System

Setu p

18 ACURA RDX NAVI-31TX48500.book 45

6. Select an address you want to store as a preset.

Deleting a preset address 1. Select Shortcuts. 2. Select Places. 3. Select Edit. 4. Select Delete. 5. Select the preset number with the destination you want to delete.

45

46

uuPersonal InformationuHome Address

System Setu

p

1 Home Address

If you have PIN-protected your home addresses, enter your PIN when prompted. Press to select OK. PINs are optional.

2 PIN Numbers P. 47

If your home street is not in the system database, park on the nearest verified street to your home. When entering the Address field, rotate to select Current Position to use your current location as the home address and press .

You can delete a home address if necessary. Move and rotate to select Clear Home Entry. Press

. Rotate to select Yes. Press .

When you transfer the vehicle to a third party, delete all home addresses.

The home icon is shown on the map screen on the 1/20 and 1/8 mile (80 and 200 m) scales.

18 ACURA RDX NAVI-31TX48500.book 46

Home Address H SETTINGS button u Navi Settings u Personal Info u Edit Go Home

Set a home address that you frequently use. 1. Edit the name, address, and phone

number the same way as an address in the address book.

2 Adding an Address Book Entry P. 40

2. Move and rotate to select OK. Press .

uuPersonal InformationuPIN Numbers System

Setu p

1 PIN Numbers

PIN Personal Identification Number (PIN) is a password used to access personal data.

PINs are optional. If you choose to use a PIN, keep a note of the number in a secure location. If you forget your PIN, a dealer will have to reset the navigation system and all of your stored information will be erased. The factory default is no PIN.

If you want to stop using a PIN, move to select Turn Off PIN Entry. Press .

18 ACURA RDX NAVI-31TX48500.book 47

PIN Numbers H SETTINGS button u Navi Settings u Personal Info u PIN Number

Set a four-digit PIN for protecting personal addresses and your home address. Once you set a PIN, you are prompted to enter it whenever you access a personal address or a home address.

1. Rotate to select the PIN to create. Press .

2. Rotate to select a digit to enter. Press to select OK. Repeat to enter a new four-digit PIN.

3. Re-enter the new PIN, when prompted, to confirm the number you just entered. Press to select OK. u If you have not entered the

same number both times, an INCORRECT PIN message is displayed. Enter your PIN again.

47

48

uuPersonal InformationuPrevious Destination

System Setu

p

1 Previous Destination

Up to 50 destinations can be stored.

To cancel the selection of a previous destination, rotate to highlight the destination again. Press

to de-select it.

18 ACURA RDX NAVI-31TX48500.book 48

Previous Destination H SETTINGS button u Navi Settings u Personal Info u Previous Destination

The navigation system maintains a list of your previously routed destinations as a shortcut for entering the same destination in the future. You can delete some or all of your previous destinations from the list.

1. Rotate to select the destination to delete. Press . u Repeat the procedure as

necessary. u Items to be deleted are

indicated with a trash icon.

2. Move and rotate to select OK to delete the selected destinations.

Trash icon

uuPersonal InformationuCategory History System

Setu p

1 Category History

Up to 50 categories can be stored.

To cancel the selection of a category, rotate to highlight the category again. Press to de-select it.

18 ACURA RDX NAVI-31TX48500.book 49

Category History H SETTINGS button u Navi Settings u Personal Info u Category History

The navigation system maintains a list of your recently used place categories as a shortcut for selecting the same categories in the future. You can delete some or all of your recently used categories from the list.

1. Rotate to select the category to delete. Press . u Repeat the procedure as

necessary. u Items to be deleted are

indicated with a trash icon.

2. Move and rotate to select OK to delete the selected categories.

Trash icon

49

50

uuPersonal InformationuDownload POI

System Setu

p

1 Importing POI Categories

For more information about connecting a USB flash drive.

2 Connecting a USB Flash Drive P. 241

POI data in csv and kml formats can be imported.

You can download POI data from various POI websites.

If you select From AcuraLink, you can download POI data from the AcuraLink server.

2 AcuraLink P. 298

18 ACURA RDX NAVI-31TX48500.book 50

Download POI Import custom Points of Interest (POI) into the navigation system and set the POI as a destination. You can also add, edit, and delete POIs.

H MENU button (on map) u More Search Methods u Download POI

1. Connect a USB flash drive with stored POI data to the USB connector.

2. Move and rotate to select Import from USB. Press .

Importing POI Categories

uuPersonal InformationuDownload POI System

Setu p

1 Editing POI Categories

If you select From AcuraLink, you can edit Alert only.

18 ACURA RDX NAVI-31TX48500.book 51

3. Rotate to select a category to import. Press .

H SETTINGS button u Navi Settings u Personal Info u Download POI

1. Rotate to select the downloaded POI category to edit. Press .

Editing POI Categories

Continued 51

52

uuPersonal InformationuDownload POI

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 52

2. Rotate to select an item. Press .

The following items are available: Alert Setting: Alerts you when you approach the places/landmarks in the

category. On: Beeps and displays a message when your vehicle gets near the places/ landmarks in the category. Off (factory default): Disables the feature.

Delete Category: Deletes all places/landmarks and icon in the selected category. Edit Icon: Changes the category icon.

18 ACURA RDX NAVI-31TX48500.book 53

Routing

System

Setu p

H SETTINGS button u Navi Settings u Routing

Choose various settings that determine the navigation system functionality during route calculation.

Rotate to select an item. Press .

The following items are available: Route Preference: Changes the route preferences (calculating method).

2 Route Preference P. 54

Unverified Routing: Sets whether you use the route guidance in unverified areas.

2 Unverified Routing P. 56

Traffic Rerouting: Sets whether you use automatic recalculation based on traffic information.

2 Traffic Rerouting P. 58

Edit POI Search Radius Along Route: Sets the distance from the route to find waypoints.

2 Edit POI Search Radius Along Route P. 59

Avoided Area: Specifies areas to avoid when calculating a route. 2 Avoided Area P. 60

53

54

uuRoutinguRoute Preference

System Setu

p

1 Route Preference

The calculated route may be the shortest route or the route you would choose. For safety reasons, the system generally applies the following rules to your route: Shortcuts through residential areas are avoided. Right turns are favored over left turns or U-turns. Time-restricted turns (turns prohibited at certain

times of the day) are not used.

Check the ferry schedule when the calculated route includes ferry route.

ETC is short for the Electronic Toll Collection system.

Server Route You can view three routes distributed from

AcuraLink. 2 Viewing the Routes P. 143

Set to On and select Optimal route to select your desired route.

2 Optimal Routes P. 55

18 ACURA RDX NAVI-31TX48500.book 54

Route Preference H SETTINGS button u Navi Settings u Routing u Route Preference

Change the route preference by selecting minimum or maximum driving methods. 1. Rotate to select an item. Press

. 2. Rotate to select Min or Max.

Press . u Repeat step 1 and 2 as

necessary. 3. Move to select OK. Press .

uuRoutinguRoute Preference System

Setu p

1 Optimal Routes

Optimal Routes is a subscription service. For more information, contact an Acura dealer or visit owners.acura.com (U.S.) or www.acura.ca/owners/ acuralink (Canada).

18 ACURA RDX NAVI-31TX48500.book 55

H SETTINGS button u Navi Settings u Routing u Route Preference

You can select desired routes by sorting the route list. The three top routes can be displayed on the Select a route screen.

2 Viewing the Routes P. 143

1. Move and rotate to select Optimal Routes. Press .

2. Rotate to select a route type. Press .

3. Move and rotate to select OK. Press .

Optimal Routes

55

56

uuRoutinguUnverified Routing

System Setu

p

1 Unverified Routing

Unverified roads are found in rural areas, and typically include residential streets away from the center of a town. They may not be accurate, and can contain errors in location, naming, and address range.

Unverified roads are shown only when viewing the map in the 1/20, 1/8, 1/4, 1/2, 1 and 2 (mile) / 80, 200, 400, 800 (m), 1.6 and 3.2 (km) map scales.

Straight line guide

Blue-pink route line

18 ACURA RDX NAVI-31TX48500.book 56

Unverified Routing H SETTINGS button u Navi Settings u Routing u Unverified Routing

Receive turn-by-turn map and voice guidance in unverified areas. Rotate to select On or Off. Press

.

Differences Off On (factory default)

On or Off? The driver wishes to manually navigate using the navigation map and choose the streets that lead to the destination.

The driver chooses to let the navigation system suggest possible routing, knowing that the guidance may not be accurate.

Route calculation

Route is usually longer, using verified roads whenever possible.

Route is shorter, but uses unverified (purple) streets that may not be accurate.

uuRoutinguUnverified Routing System

Setu p

18 ACURA RDX NAVI-31TX48500.book 57

Route line The route line uses verified streets only (when possible). If Straight Line Guide is set to On, a pink vector line is displayed on the map that continually points to your destination.

2 Straight Line Guide P. 78

A blue-pink route line highlights suggested unverified streets on the map while traveling to your destination.

Cautionary messages

Cautionary pop-up screens and voice announcements remind you to obey all traffic restrictions when starting route guidance, approaching an unverified area, and entering an unverified street.

Cautionary pop-up screens and voice announcements remind you to obey all traffic restrictions when entering an unverified street.

Guidance (map/voice)

There is no turn-by-turn map or voice guidance.

Voice guidance commands end with the phrase if possible to remind you to verify all traffic restrictions.

Directions list A direction list is typically not available. However, depending on your route, directions are provided to help you reach the first available verified road.

A direction list is provided showing street names and turn symbols in pink.

Differences Off On (factory default)

57

58

uuRoutinguTraffic Rerouting

System Setu

p

1 Traffic Rerouting

Traffic Rerouting requires an AcuraLink Real-Time TrafficTM subscription.

2 AcuraLink P. 298

Automatic traffic rerouting may not provide a detour route depending on circumstances.

18 ACURA RDX NAVI-31TX48500.book 58

Traffic Rerouting H SETTINGS button u Navi Settings u Routing u Traffic Rerouting

A faster route can be calculated based on continuously updated traffic information. 2 Traffic ReroutingTM P. 156

Rotate to select an option. Press .

The following options are available: On: The system reroutes automatically based on traffic information. Off (factory default): Disables the feature.

uuRoutinguEdit POI Search Radius Along Route System

Setu p

18 ACURA RDX NAVI-31TX48500.book 59

Edit POI Search Radius Along Route H SETTINGS button u Navi Settings u Routing u Edit POI Search Radius

Along Route

Select the distance from your highlighted route line (on either side of your route) that the system will search for a waypoint.

2 Adding Waypoints P. 161

You can specify a different search distance for freeways/highways and surface streets.

1. Rotate to select an item. Press .

2. Rotate to select a search distance. Press .

The following items are available: On Freeways (U.S.)/On highways (Canada): 1, 2, 5, or 10 miles (1.6, 3, 8, or 16

km) can be set. Factory default is 2 miles (3 km). On Surface Streets: 1/2, 1, 2, or 5 miles (0.8, 1.6, 3, or 8 km) can be set. Factory

default is 1/2 mile (0.8 km).

59

60

uuRoutinguAvoided Area

System Setu

p

1 Avoided Area

The maximum size of one side of an avoid area is approximately 1/2 mile (800 m).

If your selected area contains a freeway/highway, you are asked Do you want to avoid freeways (highways)? Answering No allows you to use a route through an avoid area on a freeway/highway without any pop-up messages.

You can select areas to avoid, however you cannot select roads or areas that you want the system to use for routing.

You can enter up to 25 characters for the name.

18 ACURA RDX NAVI-31TX48500.book 60

Avoided Area H SETTINGS button u Navi Settings u Routing u Avoided Area

Specify up to five areas to avoid (e.g., road construction, closures), if possible, when the system calculates routes to your destination.

1. Move and rotate to select New Area, or rotate to select an existing area to edit.

2. Rotate to select Name to label the area to avoid. Press .

3. Enter a name or title. Move to select OK.

4. Rotate to select Area to define the area to avoid. Press .

The following options are available (after an area is set): View Area: Displays the selected avoid area on the map. Delete: Deletes the selected avoid area.

uuRoutinguAvoided Area System

Setu p

1 Avoided Area

Avoid area can be set in the 1/20, 1/8, or 1/4 mile (80, 200, or 400 m) map scales.

18 ACURA RDX NAVI-31TX48500.book 61

5. Rotate to select a method for specifying the area. Press .

The following options are available: Address: Specify the general area by entering an address.

2 Address P. 118

Map Input: Specify the general area by map input. 2 Map Input P. 138

6. If you select Map Input, scroll the map to position the cursor over your desired start point, adjusting the map scale as necessary. Press

to mark the start point. u To redo the area selection,

press the BACK button. 7. Scroll the map to draw the area.

Press to mark the end point. 8. Press to select OK.

u The area you specify is displayed in the list of areas to avoid.

Cursor

Avoid area

61

62

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 62

Guidance

H SETTINGS button u Navi Settings u Guidance

Choose various settings that determine the navigation system functionality during route guidance.

Rotate to select an item. Press .

The following items are available: Guidance Mode: Sets whether to display only the map screen or a split map-

guidance screen. 2 Guidance Mode P. 63

Street Name Guidance (U.S. models): Sets whether to read out the street names during voice guidance.

2 Street Name Guidance P. 65

Non-map Screens: Sets whether the guidance screen interrupts the screen display.

2 Non-map Screens P. 66

Guidance Point: Sets whether to display the guidance information to the destination or the next waypoint.

2 Guidance Point P. 67

Estimated Time: Sets whether to display the remaining time or arrival time to the guidance point.

2 Estimated Time P. 68

uuGuidanceuGuidance Mode System

Setu p

1 Guidance Mode

The guidance mode can also be selected from the map menu.

2 Map Menu P. 151

Press the NAV button to switch between the map, next guidance direction, and a list of guidance directions.

Turn-by-Turn Directions The next guidance point appears on the multi- information display.

2 Turn-by-Turn Directions P. 10

You can turn this feature on or off using the multi- information display. See the Owners Manual for instructions.

18 ACURA RDX NAVI-31TX48500.book 63

Guidance Mode H SETTINGS button u Navi Settings u Guidance u Guidance mode

Select the display mode for the map and guidance screens. Rotate to select an option. Press

.

The following options are available: Map (factory default): Displays only the map screen. When you approach a

guidance point, the next guidance point appears.

Map screen

Near the next guidance point

Next Maneuver screen

Next guidance point

63Continued

64

uuGuidanceuGuidance Mode

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 64

Direction List: Displays the map and direction list simultaneously on the map screen. When you approach a guidance point, the next guidance point appears.

Next Maneuver: Displays the map and next guidance point simultaneously on the map screen.

Direction List screen

Guidance direction list

Near the next guidance point

Next Maneuver screen

Next guidance point

Next Maneuver screen

Next guidance point

Near the next guidance point

Next Maneuver screen

uuGuidanceuStreet Name Guidance System

Setu p

1 Street Name Guidance

This feature is only available when the system language is set to English.

This feature may not be available in non-English speaking areas.

This function is available on U.S. models only.

18 ACURA RDX NAVI-31TX48500.book 65

Street Name Guidance H SETTINGS button u Navi Settings u Guidance u Street Name Guidance

The navigation system includes the street names during voice guidance (e.g., Turn right on Main Street).

Rotate to select an option. Press .

The following options are available: On (factory default): Voice guidance includes the street names. Off: Disables the feature.

65

66

uuGuidanceuNon-map Screens

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 66

Non-map Screens H SETTINGS button u Navi Settings u Guidance u Non-map Screens

The navigation system temporarily interrupts the screen display to view the guidance screen as you approach a guidance point.

Rotate to select an option. Press .

The following options are available: On: The guidance screen interrupts other mode screens (e.g., audio, phone, etc,

except the rear view camera mode). Off (factory default): Disables the feature.

uuGuidanceuGuidance Point System

Setu p

18 ACURA RDX NAVI-31TX48500.book 67

Guidance Point H SETTINGS button u Navi Settings u Guidance u Guidance Point

Set the guidance point to display on the map screen. Rotate to select an option. Press

.

The following options are available: Destination (factory default): Displays the remaining/arrival time and distance to

the destination. Next Point: Displays the remaining/arrival time and distance to the next

waypoint.

67

68

uuGuidanceuEstimated Time

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 68

Estimated Time H SETTINGS button u Navi Settings u Guidance u Estimated Time

Select the estimated time to display on the screen. Rotate to select an option. Press

.

The following options are available: Arrival: Displays the arrival time to the destination or the next waypoint. Remaining (factory default): Displays the remaining time to the destination or

the next waypoint.

18 ACURA RDX NAVI-31TX48500.book 69

Map

System

Setu p

H SETTINGS button u Navi Settings u Map

Select the landmark icons to display on the map, change the orientation of the map, display your current location, and learn the meaning of the icons, colors, and symbols displayed on the map.

Rotate to select an item. Press .

The following items are available: Show Icon on Map: Selects the icons to display on the map.

2 Showing Icons on Map P. 71

Color (Day): Selects the color of the map for the Day mode. 2 Color P. 73

Color (Night): Selects the color of the map for the Night mode. 2 Color P. 73

View: Selects the map orientation (North-up, Heading-up, or 3D map). 2 View (Map Orientation) P. 76

3D Angle Adjustment: Adjusts the viewing angle for the 3D map. 2 3D Angle Adjustment P. 77

Straight Line Guide: Sets whether to display a straight guideline to the destination or waypoint.

2 Straight Line Guide P. 78

69Continued

70

uuMapu

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 70

Current Location: Displays and saves your current location. 2 Current Location P. 79

Map Legend: Displays an overview of the map features. 2 Map Legend P. 80

Display Tracking: Sets whether to display the tracking dots on the map. 2 Display Tracking P. 84

Delete Tracking: Deletes the tracking dots on the map. 2 Deleting Tracking Dots P. 85

Correct Vehicle Position: Adjusts the position of the vehicle on the map. 2 Correct Vehicle Position P. 86

System Device Information: Views database, software, device, and vehicle identification information.

2 System Device Information P. 312

Map Data Update: Checks the map data update status when updating the map database.

2 Map Data Update P. 312

uuMapuShowing Icons on Map System

Setu p

1 Showing Icons on Map

If you have PIN-protected your address book, enter your PIN when prompted. Move to select OK. PINs are optional.

2 PIN Numbers P. 47

18 ACURA RDX NAVI-31TX48500.book 71

Showing Icons on Map H SETTINGS button u Navi Settings u Map u Show Icon on Map

Select the icons that are displayed on the map. 1. Rotate to select an item. Press

.

2. Rotate to select an option. Press . u Repeat step 1 and 2 as

necessary. 3. Move to select OK. Press .

The following options are available: All On: Displays the landmark icons.

2 Map Screen Legend P. 9

Customize: Fine-tunes the icon display. 2 Fine-tuning the Icons P. 72

Off: Hides the landmark icons.

71Continued

72

uuMapuShowing Icons on Map

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 72

Icons in some categories can be fine-tuned to display or hide. 1. Rotate to select the icons to

display on the map. Press . u Pressing toggles the icon

display on or off. u Repeat the procedure as

necessary.

2. Move and rotate to select OK. Press .

Fine-tuning the Icons

uuMapuColor System

Setu p

1 Color (Day)

The factory default is set to Beige.

1 Color (Night)

The factory default is set to Blue.

18 ACURA RDX NAVI-31TX48500.book 73

Color Set separate map colors for Day and Night modes.

H SETTINGS button u Navi Settings u Map u Color (Day)

Rotate to select a color for the Day mode. Press .

H SETTINGS button u Navi Settings u Map u Color (Night)

Rotate to select a color for the Night mode. Press .

Color (Day)

Color (Night)

73Continued

uuMapuColor

74

System Setu

p

1 Switching Display Mode Manually

A visual guide helps you see the difference between Day and Night modes.

2 Day or Night Mode P. 10

18 ACURA RDX NAVI-31TX48500.book 74

Set the screen brightness separately for Day and Night modes. Press the (Display Mode) button to cycle through the display modes (Day to Night to Off).

1. Press the (Display Mode) button. u The Brightness bar is displayed

for a few seconds. u Rotate to adjust the

brightness. Press . 2. Press the (Display Mode)

button again. u Repeat the procedure to switch

the display modes.

Switching Display Mode Manually

Illumination Priority Operation

button 1 Selects Day, Night, or Off display mode. This button has the highest priority and overrides all other display control adjustments listed below. Remember: Once you press this button, you assume full manual control of the display mode until the power mode is set to VEHICLE OFF (LOCK).

Sunlight sensor (see your Owners Manual for location)

2 If the sunlight sensor detects daylight and the headlights are turned on, the system automatically overrides the Night display and displays the Day display mode. Remember: If desired, use the (Display Mode) button to override this automatic choice.

uuMapuColor System

Setu p

18 ACURA RDX NAVI-31TX48500.book 75

Dash illumination adjustment knob (see your Owners Manual for location)

3 When headlights are turned on, and you wish to have the Day display mode, adjust the illumination to the full brightness setting (beeps). Remember: Adjust the dash brightness back to mid-range to allow auto switching by sensing the headlights are on or off.

Headlights (Auto/ On/Off)

4 When turned on, the display changes to Night display mode. The previous three controls listed above can cancel this function. Remember: Use the (Display Mode) button, or adjust the dash illumination to full brightness, to set the display to your desired choice.

Screen color choice N/A The user can select the color of the screen that will be displayed for the Day and Night display modes described above.

Illumination Priority Operation

75

76

uuMapuView (Map Orientation)

System Setu

p

1 View (Map Orientation)

The red arrow in the symbol always points North.

Heading-up and 3D map view switch to the North-up view on 2 miles (3.2 km) or wider map scale.

The birds eye view map switches to the Heading-up map while scrolling the map.

The viewing angle for the birds eye view can be adjusted.

2 3D Angle Adjustment P. 77

18 ACURA RDX NAVI-31TX48500.book 76

View (Map Orientation) H SETTINGS button u Navi Settings u Map u View

Select the map orientation. Rotate to select an option. Press

.

The following options are available: North-up: Displays the map with North always pointing up. Heading-up: Displays the map so that the direction you are traveling is always

pointing up. 3D Map: Displays the birds eye view map.

uuMapu3D Angle Adjustment System

Setu p

18 ACURA RDX NAVI-31TX48500.book 77

3D Angle Adjustment H SETTINGS button u Navi Settings u Map u 3D Angle Adjustment

Adjust the viewing angle. Rotate to adjust the angle. Press

.

77

78

uuMapuStraight Line Guide

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 78

Straight Line Guide H SETTINGS button u Navi Settings u Map u Straight Line Guide

Set whether to display a straight guideline to the destination or waypoint. Rotate to select an option. Press

.

The following options are available: On (factory default): Displays the straight guideline on the map. Off: Disables the feature.

uuMapuCurrent Location System

Setu p

1 Current Location

If you have PIN-protected your address book, enter your PIN when prompted. Press to select OK. PINs are optional.

2 PIN Numbers P. 47

The elevation is not displayed if the system is receiving insufficient GPS information. When elevation is displayed, it may differ with roadside elevation signs by 100 ft (30 m) or more.

Saving your current location does not change or cancel your current route.

18 ACURA RDX NAVI-31TX48500.book 79

Current Location H SETTINGS button u Navi Settings u Map u Current Location

Display and save your current location for future use as a destination. The address, latitude, longitude, and elevation of your current location are displayed.

To save your current location in the address book: 1. Press to select Address Book.

u Move to scroll the map as necessary.

2. Edit the name, phone number, and category.

2 Address Book P. 39

3. Move and rotate to select OK. Press .

79

80

uuMapuMap Legend

System Setu

p

1 Map Legend

A visual guide helps you see the map legend. 2 Map Screen Legend P. 9 2 AcuraLink Real-Time TrafficTM P. 14

18 ACURA RDX NAVI-31TX48500.book 80

Map Legend H SETTINGS button u Navi Settings u Map u Map Legend

See an overview of the map lines, areas, routes, traffic information, and navigation icons.

Move or to select an item. u The system displays the map

legend.

uuMapuMap Legend System

Setu p

1 Map Scale and Functions

You can change between mile or km. 2 Unit Settings P. 33

18 ACURA RDX NAVI-31TX48500.book 81

The functions that are available from the map screen depend on the map scale.

Map Scale and Functions

Function page

Map Scale (top: mile, bottom: metric)

1/20 1/8 1/4 1/2 1 2 5 15 50 150 350 1000

80 200 400 800 1.6 3.2 8 24 80 240 560 1600

Icon display

Landmark icon 9

Exit info. 9

One-way traffic

9

Waypoint flag

10

Traffic incident 14

Map orientation

Heading-up 76

North-up 76

3D map 76

Others

Tracking dots 148

Unverified road 9

Map features 9

Avoid areas 60

Traffic speed 14

Continued 81

uuMapuMap Legend

82

System Setu

p

1 Map Icons and Functions

Icon display control Icons that can be displayed or hidden using the Interface Dial or voice command.

Icon selectable Icons that can be selected as a destination using the Interface Dial.

Icon searchable Icons that can be searched using the Find Nearest voice command.

18 ACURA RDX NAVI-31TX48500.book 82

Display or hide all icons on the map screen, with the exception of Honda/Acura Dealer icons which are always shown.

Landmark icon

Map Icons and Functions

Type Icon display

control Icon selectable Icon searchable

Honda/Acura dealer Always on Yes Yes

Hospital Yes Yes Yes

School Yes Yes Yes

ATM Yes Yes Yes

Gas station Yes Yes Yes

Restaurants Yes Yes Yes

Post office Yes Yes Yes

Grocery store Yes Yes Yes

Hotel/Lodging Yes Yes Yes

Police station No icon No Yes

Shopping, Tourist attraction, Bank

No icon No Yes

Parking garage Yes Yes Yes

Parking lot Yes Yes Yes

Freeway/Highway exit info.

Yes Yes N/A

uuMapuMap Legend System

Setu p

1 Traffic icon

When you use the Interface Dial to position the cursor (round red circle) over the traffic incident icon, you can view the summary of the incident.

Press on the traffic incident icon to view a pop-up message describing the incident in detail.

18 ACURA RDX NAVI-31TX48500.book 83

Traffic icon

Type Icon display

control Icon selectable Icon searchable

Traffic incident Yes No N/A

83

84

uuMapuDisplay Tracking

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 84

Display Tracking H SETTINGS button u Navi Settings u Map u Display Tracking

The navigation system can be set to display white tracking dots (breadcrumbs) on the map screen.

Rotate to select an option. Press .

The following options are available: On: The system displays the white tracking dots.

2 Tracking Dots P. 148

Off (factory default): Disables the feature.

uuMapuDisplay Tracking System

Setu p

1 Deleting Tracking Dots

When you transfer the vehicle to a third party, delete the tracking dots.

18 ACURA RDX NAVI-31TX48500.book 85

H SETTINGS button u Navi Settings u Map u Delete Tracking

Rotate to select Yes. Press .

Deleting Tracking Dots

85

86

uuMapuCorrect Vehicle Position

System Setu

p

1 Correct Vehicle Position

An apparent position error can occur where buildings, tunnels, and other objects block or reflect the GPS signals, forcing the system to use dead reckoning to determine your location and direction.

Using this function to adjust vehicle position is not recommended. When the system reacquires a GPS signal, it will automatically place the vehicle in the correct location.

If you continually have to adjust the vehicle position, you may have problems with the GPS reception or there may be database errors.

2 System Limitations P. 334

18 ACURA RDX NAVI-31TX48500.book 86

Correct Vehicle Position H SETTINGS button u Navi Settings u Map u Correct Vehicle Position

Manually adjust the current position of the vehicle as displayed on the map screen if the position appears to be incorrect.

1. Put the vehicle in Park. 2. Rotate to select Correct

Vehicle Position. Press . 3. Scroll the map to position the

cursor over at your correct position. Press .

4. Rotate to position the arrowhead in the correct direction the vehicle is facing.

5. Press to select OK.

18 ACURA RDX NAVI-31TX48500.book 87

On Demand Multi-Use DisplayTM

System

Setu p

Changing the Screen Settings Adjusts the screen settings of the On Demand Multi-Use DisplayTM.

1. Select More. 2. Select Screen Settings. 3. Use , or other icons to

adjust the setting. u Use the / icons to turn

the page. u Select to go back to the

previous screen.

The followings are adjustable screen settings: Sync Display Brightness: Selects whether the screen brightness synchronizes

with the instrument panel brightness. Brightness: Adjusts the screen's brightness. Contrast: Adjusts the screen's contrast. Black Level: Adjusts the screen's black level. Display: Changes between the daytime or nighttime modes. Beep: Turns on or off the beep that sounds every time you touch the screen. Keyboard: Changes the on-screen keyboard from the alphabetical order to the

qwerty type. Fade Timer: Sets the screen black out timing.

87

88

System Setu

p

18 ACURA RDX NAVI-31TX48500.book 88

Customized Features

1 Customized Features

When you customize settings, make sure that the vehicle is at a complete stop and shift to .

To customize other features, rotate , move , , or , and press . 2 List of customizable options P. 95

Use the audio/information screen to customize certain features.

How to customize Select your desired setting item by pressing the SETTINGS button, then rotating while the power mode is ON and the vehicle is at a complete stop. Press .

SETTINGS Button

Audio/Information Screen

uuCustomized Featuresu System

Setu p

18 ACURA RDX NAVI-31TX48500.book 89

Customization flow

Press the SETTINGS button.

Guidance Volume

Brightness Contrast

Black Level

Bluetooth Status Bluetooth Device List

Edit pairing code

Default

Display

System Settings

Bluetooth

Voice Reco

Sync Display Brightness

Clock

Clock Adjustment Clock Format

Clock Wallpaper

Clock/Wallpaper Type

Guidance Volume Sound/ Beep

Verbal Reminder

Song By Voice Song By Voice Phonetic Modification

Phonebook Phonetic Modification

Auto Time Zone Auto Daylight

Clock Reset

Voice Prompt

89Continued

90

uuCustomized Featuresu

System Setu

p

Trip A Reset Timing Trip B Reset Timing

Language Selection Adjust Outside Temp. Display

Forward Collision Warning Distance*

ACC Forward Vehicle Detect Beep*

Turn by Turn Display*

Door Unlock Mode

Keyless Access Light Flash Keyless Access Beep

Blind Spot Info*

Lane Keeping Assist Suspend Beep*

ACC Display Speed Unit*

Remote Start System On/Off*

Memory Position Link

Keyless Access Beep Volume

Factory Data Reset

Background Color Header Clock Display

Units

Voice Command Tips*

Language

System Device Information

18 ACURA RDX NAVI-31TX48500.book 90

Default

Vehicle Settings

Driver Assist

System Setup

Keyless Access Setup

Driving Position Setup

Meter Setup

Others

* Not available on all models

uuCustomized Featuresu System

Setu p

Maintenance Resetnfo.

Key And Remote Unlock Mode Keyless Lock Answer Back

Security Relock Timer

Auto Door Lock Auto Door Unlock

Keyless Open Mode Power Open by Outer Handle

Address Book Edit Go Home PIN Number

Previous Destination

Download POI Category History

Interior Light Dimming Time Headlight Auto Off Timer

Auto Light Sensitivity

18 ACURA RDX NAVI-31TX48500.book 91

Maintenance I

Door Setup

Power Tailgate Setup

Personal

Information

Lighting

Setup

Navi

Settings

Default

91Continued

92

uuCustomized Featuresu

System Setu

p

Show Icon on Map Color (Day)

Color (Night) View

3D Angle Adjustment Straight Line Guide

Current Location Map Legend

Display Tracking Delete Tracking

Correct Vehicle Position System Device Information

Map Data Update

Unverified Routing Traffic Rerouting

Edit POI Search Radius Along Route Avoided Area

Freeways Toll Road ETC Roads

Route

reference

Ferries U-turn

Server Route

Guidance Mode Street Name Guidance*

Non-map Screens Guidance Point Estimated Time

18 ACURA RDX NAVI-31TX48500.book 92

Map

This function is available on U.S. models only.

*:

Routing

P

Guidance

uuCustomized Featuresu System

Setu p

Source Select Popup HD Radio Mode*1

Cover Art*1

Bluetooth Device List*1

Recording from CD

Notification Beep

Favorite Teams Play Song Top

Recording Quality HDD Info

ect Bluetooth Audio Device

ate Gracenote Album Info Delete All HDD Data

Fixed Guideline Dynamic Guideline

Cross Traffic Monitor

18 ACURA RDX NAVI-31TX48500.book 93

Default

Audio Settings

SportsFlashTM*1

Conn

Upd

Rear

Camera

Default

Camera Settings

May change depending on your currently selected source.

*1:

93Continued

94

uuCustomized Featuresu

System Setu

p

Info Screen Preference

Clock/Wallpaper Type Clock Adjustment

Clock Format

New AcuraLink Message

Auto Time Zone Auto Daylight

Enable Text/Email

Select Account

New Text/Email Alert

Add Bluetooth Device

Disconnect

Connect Phone

Edit Speed Dial Auto Transfer Auto Answer

Ring Tone

Use Contact Photo Automatic Phone Sync

Bluetooth Device List

Delete AcuraLink Message AcuraLink Subscription Status

Clock Reset

18 ACURA RDX NAVI-31TX48500.book 94

Clock

Default

Other

Info Settings

AcuraLink

Default

Text/Email

Default

Phone

Default

Phone Settings

uuCustomized Featuresu System

Setu p

18 ACURA RDX NAVI-31TX48500.book 95

List of customizable options

*1: Default Setting

Setup Group

Customizable Features Description Selectable Settings

System Settings

Display

Sync Display Brightness Selects whether the display brightness synchronizes with the instrument panel brightness.

On*1/Off

Brightness Changes the brightness of the audio/information screen.

Contrast Changes the contrast of the audio/information screen.

Black Level Changes the black level of the audio/information screen.

Sound/ Beep

Guidance Volume Changes the volume of the audio speakers.

Verbal Reminder Turns the verbal reminders on and off. On*1/Off

Bluetooth

Bluetooth Status Turns the Bluetooth on and off. On*1/Off

Bluetooth Device List Pairs a new phone to HFL, edits and deletes a paired phone, and creates a security PIN.

2 Pairing a Phone P. 255

Edit pairing code Changes a pairing code. 2 Changing the Pairing Code P. 258

Random/Fixed*1

95Continued

96

uuCustomized Featuresu

System Setu

p

ption Selectable Settings

and off. On*1/Off

on and off. ) P. 231

On*1/Off

d for music stored in the

n P. 233

d for the phonebook. Modification P. 268

e voice prompt.

18 ACURA RDX NAVI-31TX48500.book 96

*1: Default Setting

Setup Group

Customizable Features Descri

System Settings

Voice Reco

Voice Prompt Turns the voice prompt on

Song By Voice Turns the Song By VoiceTM

2 Song By VoiceTM (SBV

Song By Voice Phonetic Modification

Modifies a voice comman HDD or an iPod.

2 Phonetic Modificatio

Phonebook Phonetic Modification

Modifies a voice comman 2 Phonebook Phonetic

Guidance Volume Changes the volume of th

uuCustomized Featuresu System

Setu p

tion Selectable Settings

type. Analog/Digital*1/Small Digital/Off

type. r a new wallpaper. r a wallpaper. . 30

Blank/Galaxy*1/ Metallic/Add New

8

splay from 12H to 24H. 12H*1/24H

to automatically adjust ough different time On*1/Off

to automatically adjust or fall back by one ing time change occurs.

On*1/Off

ems in the Clock group.

18 ACURA RDX NAVI-31TX48500.book 97

*1: Default Setting

Setup Group

Customizable Features Descrip

System Settings

Clock

Clock/ Wallpaper Type

Clock Changes the clock display

Wallpaper

Changes the wallpaper Imports an image file fo Deletes an image file fo

2 Wallpaper Settings P

Clock Adjustment Adjusts Clock. 2 Clock Adjustment P. 2

Clock Format Selects the digital clock di

Auto Time Zone Sets the navigation system the clock when driving thr zones.

Auto Daylight Sets the navigation system the clock (spring ahead hour) when a daylight sav

Clock Reset Resets the settings of all it

97Continued

98

uuCustomized Featuresu

System Setu

p

ption Selectable Settings

on the navigation map mile*1/km (U.S.) mile/km*1 (Canada)

age. English*1/Franais/ Espaol

ontrol of the system is tion while driving. Only

able. On*1/Off

color of the audio/ e On Demand Multi-Use

Blue*1/Amber/Red/ Green

display comes on. On*1/Off

information.

heir factory default. ttings P. 113

zed items in the System .

Default/OK

18 ACURA RDX NAVI-31TX48500.book 98

*1: Default Setting

Setup Group

Customizable Features Descri

System Settings

Others

Units Changes the distance unit screen.

Language Changes the display langu

Voice Command Tips*

Alerts you when manual c disabled to prevent distrac voice commands are avail

Background Color Changes the background information screen and th DisplayTM.

Header Clock Display Selects whether the clock

System Device Information Displays the system/device

Factory Data Reset Resets all the settings to t 2 Defaulting All the Se

Default Cancels/Resets all customi Settings group as default

* Not available on all models

uuCustomized Featuresu System

Setu p

tion Selectable Settings

e CMBSTM alerts. Long/Normal*1/Short

when the system the vehicle goes out of

On/Off*1

r ACC on the multi- mph*1/km/h (U.S.) mph/km/h*1 (Canada)

when the LKAS is On/Off*1

e blind spot information. Audible And Visual Alert*1/Visual Alert/ Off

18 ACURA RDX NAVI-31TX48500.book 99

*1: Default Setting

Setup Group

Customizable Features Descrip

Vehicle Settings

Driver Assist System Setup

Forward Collision Warning Distance*

Changes at which distanc See the owners manual.

ACC Forward Vehicle Detect Beep*

Causes the system to beep detects a vehicle, or when the ACC range. See the owners manual.

ACC Display Speed Unit*

Changes the speed unit fo information display. See the owners manual.

Lane Keeping Assist Suspend Beep*

Causes the system to beep suspended. See the owners manual.

Blind Spot Info* Changes the setting for th See the owners manual.

99Continued * Not available on all models

100

uuCustomized Featuresu

System Setu

p

ption Selectable Settings

guage on the multi- English*1/Franais/ Espaol

eading by a few degrees. -5F ~ 0F*1 ~ +5F (U.S.) -3C ~ 0C*1 ~ +3C (Canada)

w to reset trip meter A, average speed A, and When Refueled/IGN

Off/Manually Reset*1

w to reset trip meter B, verage speed B, and When Refueled/IGN

Off/Manually Reset*1

y-turn display comes on . On*1/Off

memory system on and On*1/Off

18 ACURA RDX NAVI-31TX48500.book 100

*1: Default Setting

Setup Group

Customizable Features Descri

Vehicle Settings

Meter Setup

Language Selection Changes the displayed lan information display. See the owners manual.

Adjust Outside Temp. Display

Adjusts the temperature r See the owners manual.

Trip A Reset Timing

Changes the setting of ho average fuel economy A, elapsed time A. See the owners manual.

Trip B Reset Timing

Changes the setting of ho average fuel economy B, a elapsed time B. See the owners manual.

Turn by Turn Display*

Selects whether the turn-b during the route guidance See the owners manual.

Driving Position Setup

Memory Position Link Turns the driving position off. See the owners manual.

* Not available on all models

uuCustomized Featuresu System

Setu p

tion Selectable Settings

ck when you grab the Driver Door Only*1/All Doors

e keyless access beep.

s to flash when you On*1/Off

d when you unlock/lock On*1/Off

tart feature on and off. On*1/Off

e the interior lights stay rs.

60seconds/ 30seconds*1/ 15seconds

e the exterior lights stay ers door.

60seconds/30seconds/ 15seconds*1/0seconds

e headlights to come on. Max/High/Mid*1/Low/ Min

18 ACURA RDX NAVI-31TX48500.book 101

*1: Default Setting

Setup Group

Customizable Features Descrip

Vehicle Settings

Keyless Access Setup

Door Unlock Mode Changes which doors unlo drivers door handle. See the owners manual.

Keyless Access Beep Volume Changes the volume of th

Keyless Access Light Flash Causes some exterior light unlock/lock the doors. See the owners manual.

Keyless Access Beep Causes the beeper to soun the doors. See the owners manual.

Remote Start System On/Off* Turns the remote engine s See the owners manual.

Lighting Setup

Interior Light Dimming Time Changes the length of tim on after you close the doo See the owners manual.

Headlight Auto Off Timer Changes the length of tim on after you close the driv See the owners manual.

Auto Light Sensitivity Changes the timing for th See the owners manual.

101Continued * Not available on all models

102

uuCustomized Featuresu

System Setu

p

ption Selectable Settings

e automatic locking With Vehicle Speed*1/ Shift from P/Off

hen the doors unlock

All Doors When Drivers Door Opens*1/ All Doors When Shifted to Park/All Doors When Ignition Switched Off/Off

door or all doors to f the remote or built-in Driver Door*1/All

Doors

ior lights flash. per sounds. On*1/Off

for the doors to relock set after you unlock the ny door.

90seconds/60seconds/ 30seconds*1

18 ACURA RDX NAVI-31TX48500.book 102

*1: Default Setting

Setup Group

Customizable Features Descri

Vehicle Settings

Door Setup

Auto Door Lock Changes the setting for th feature. See the owners manual.

Auto Door Unlock Changes the setting for w automatically. See the owners manual.

Key And Remote Unlock Mode

Sets up either the drivers unlock on the first push o key. See the owners manual.

Keyless Lock Answer Back LOCK/UNLOCK- The exter LOCK (2nd push)- The bee See the owners manual.

Security Relock Timer

Changes the time it takes and the security system to vehicle without opening a See the owners manual.

uuCustomized Featuresu System

Setu p

tion Selectable Settings

g for when the power Anytime*1/When Unlocked

the power tailgate open te outer handle.

Off (Manual Only)/On (Power/Manual)*1

isplay when you have ce service.

zed items in the Vehicle .

Default/OK

dits your address book.

dress.

tory.

es you recently used.

rted POI categories.

18 ACURA RDX NAVI-31TX48500.book 103

*1: Default Setting

Setup Group Customizable Features Descrip

Vehicle Settings

Power Tailgate Setup

Keyless Open Mode Changes the keyless settin tailgate opens. See the owners manual.

Power Open by Outer Handle

Selects whether to enable operation using the tailga See the owners manual.

Maintenance Info.

Maintenance Reset Resets the engine oil life d performed the maintenan See the owners manual.

Default Cancels/Resets all customi Settings group as default

Navi Settings

Personal Information

Address Book Stores new addresses or e

Edit Go Home Sets or edits your home ad

PIN Number Sets or changes your PIN.

Previous Destination Deletes the destination his

Category History Deletes the place categori

Download POI Edits and deletes the Impo

103Continued

104

uuCustomized Featuresu

System Setu

p

ption Selectable Settings

nce by selecting iving methods.

Max*1/Min

Max*1/Min

Max/Min*1

Max*1/Min

Max/Min*1

ted from AcuraLink. On/Off*1

route guidance in On*1/Off

matic recalculation on.

On/Off*1

route to find waypoints. mile: 1, 2*1, 5, 10mi km: 1.6, 3*1, 8, 16km

hen calculating a route.

18 ACURA RDX NAVI-31TX48500.book 104

*1: Default Setting

Setup Group Customizable Features Descri

Navi Settings

Routing

Route Preference

Freeways

Change the route prefere minimum or maximum dr

Toll Road

ETC Roads

Ferries

U-turn

Server Route View three routes distribu

Unverified Routing Sets whether you use the unverified areas.

Traffic Rerouting Sets whether you use auto based on traffic informati

Edit POI Search Radius Along Route

Sets the distance from the

Avoided Area Specifies areas to avoid w

uuCustomized Featuresu System

Setu p

tion Selectable Settings

ly the map screen or a .

Map*1/Direction List/ Next Maneuver

he street names during ls).

On*1/Off

screen interrupts the On/Off*1

e guidance information ext waypoint.

Destination*1/Next Point

e remaining time or e point.

All On*1/Off/ Customize

18 ACURA RDX NAVI-31TX48500.book 105

*1: Default Setting

Setup Group Customizable Features Descrip

Navi Settings

Guidance

Guidance Mode Sets whether to display on split map guidance screen

Street Name Guidance Sets whether to read out t voice guidance (U.S. mode

Non-map Screens Sets whether the guidance screen display.

Guidance Point Sets whether to display th to the destination or the n

Estimated Time Sets whether to display th arrival time to the guidanc

105Continued

106

uuCustomized Featuresu

System Setu

p

ption Selectable Settings

y on the map.

ap for the Day mode. White/Beige*1/Blue/ Black

ap for the Night mode. White/Beige/Blue*1/ Black

n. North-up*1/Heading- up/3D Map

for the 3D map.

straight guideline to the On*1/Off

rrent location.

e map features.

e tracking dots on the On/Off*1

on the map.

vehicle on the map.

, device, and vehicle .

ate status when se.

18 ACURA RDX NAVI-31TX48500.book 106

*1: Default Setting

Setup Group Customizable Features Descri

Navi Settings

Map

Show Icon on Map Selects the icons to displa

Color (Day) Selects the color of the m

Color (Night) Selects the color of the m

View Selects the map orientatio

3D Angle Adjustment Adjusts the viewing angle

Straight Line Guide Sets whether to display a destination or waypoint.

Current Location Displays and saves your cu

Map Legend Displays an overview of th

Display Tracking Sets whether to display th map.

Delete Tracking Deletes the tracking dots

Correct Vehicle Position Adjusts the position of the

System Device Information Views database, software identification information

Map Data Update Checks the map data upd updating the map databa

uuCustomized Featuresu System

Setu p

tion Selectable Settings

guidelines come on the On*1/Off

ic guidelines come on On*1/Off

zed items in the Rear Default/OK

itor feature on and off. On*1/Off

18 ACURA RDX NAVI-31TX48500.book 107

*1: Default Setting

Setup Group Customizable Features Descrip

Camera Settings

Rear Camera

Fixed Guideline Selects whether the fixed rear camera monitor.

Dynamic Guideline Selects whether the dynam the rear camera monitor.

Default Cancels/Resets all customi Camera group as default.

Cross Traffic Monitor

Turns the cross traffic mon See the owners manual.

107Continued

108

uuCustomized Featuresu

System Setu

p

ption Selectable Settings

selectable audio sources IO button is pressed.

On/Off*1

system automatically io waves or receives the Auto*1/Analog

on music CDs are the HDD.

Auto*1/Manual

usic files recorded to Standard*1/High

.

lbum Info (Gracenote or from USB.

Update by CD*1/ Update by USB

ta P. 223

18 ACURA RDX NAVI-31TX48500.book 108

*1: Default Setting

Setup Group

Customizable Features Descri

Audio Settings

Source Select Popup Selects whether the list of comes on when the AUD

HD Radio Mode*

Selects whether the audio switches to the digital rad analogue waves only.

Recording from CD Selects whether the songs automatically recorded to

Recording Quality Selects the quality of the m the HDD.

HDD Info Displays the HDD capacity

Update Gracenote Album Info Updates the Gracenote A Media Database) from CD

Delete all HDD Data 2 Deleting All HDD Da

FM/AM mode

CD mode

CD mode

HDD mode

CD or HDD mode

HDD mode

* Not available on all models

uuCustomized Featuresu System

Setu p

tion Selectable Settings

s alert function. Disable*1/Enable/ Enable (one time)

when the sports alert is On*1/Off

teams. On*1/Off

Start function. On*1/Off

r art display. On*1/Off

h Audio device paired

airs a Bluetooth Audio

zed items in the Audio . Default/OK

18 ACURA RDX NAVI-31TX48500.book 109

*1: Default Setting

Setup Group

Customizable Features Descrip

Audio Settings

SportsFlashTM*

Notification Turns on and off the sport

Beep Causes the system to beep notified.

Favorite Teams Selects your favorite sport

Play Song Top Turns on and off the Tune

Cover Art Turns on and off the cove

Bluetooth Device List Edits or deletes a Bluetoot to HFL.

Connect Bluetooth Audio Device Connects, disconnects or p device to HFL.

Default Cancels/Resets all customi Settings group as default

SiriusXM mode

SiriusXM mode

iPod, USB, Pandora* or AhaTM mode

Bluetooth Audio, Pandora* or AhaTM mode

Bluetooth Audio, Pandora* or AhaTM mode

109Continued * Not available on all models

110

uuCustomized Featuresu

System Setu

p

ption Selectable Settings

, or connects or e. 5

edits or deletes a paired ty PIN.

eed dial entry. ling P. 262

transfer from your nter the vehicle.

On*1/Off

ally answer an incoming ds.

On/Off*1

Fixed/Mobile Phone*1/ Off

be automatically s paired to HFL.

On*1/Off

on an incoming call On*1/Off

18 ACURA RDX NAVI-31TX48500.book 110

*1: Default Setting

Setup Group

Customizable Features Descri

Phone Settings

Phone

Connect Phone Pairs a new phone to HFL disconnects a paired phon

2 Pairing a Phone P. 25

Bluetooth Device List Pairs a new phone to HFL, phone, or creates a securi

2 Phone Settings P. 273

Edit Speed Dial Edits, adds or deletes a sp 2 Setting Up Speed Dia

Auto Transfer Sets calls to automatically phone to HFL when you e

Auto Answer Sets whether to automatic call after about four secon

Ring Tone Selects the ring tone.

Automatic Phone Sync Sets a phonebook data to imported when a phone i

Use Contact Photo Displays a callers picture screen.

uuCustomized Featuresu System

Setu p

tion Selectable Settings

age function on and off. On*1/Off

ssage account.

alert comes on the a new text/e-mail

zed items in the Phone .

Default/OK

18 ACURA RDX NAVI-31TX48500.book 111

*1: Default Setting

Setup Group

Customizable Features Descrip

Phone Settings

Text/ Email

Enable Text/Email Turns the text/e-mail mess

Select Account Selects a text or e-mail me

New Text/Email Alert Selects whether a pop-up screen when HFL receives message.

Default Cancels/Resets all customi Settings group as default

111Continued

112

uuCustomized Featuresu

System Setu

p

ption Selectable Settings

eived AcuraLink On*1/Off

es.

raLink subscription

em Settings on P. 95 to P. 98.

n the INFO button is

pops up. u pops up. op up.

Info Top/Info Menu*1/ Off

ized items in the Info .

Default/OK

18 ACURA RDX NAVI-31TX48500.book 112

*1: Default Setting

Setup Group

Customizable Features Descri

Info Settings

Acura Link

New AcuraLink Message Selects whether newly rec messages to be displayed.

Delete AcuraLink Message Deletes AcuraLink messag

AcuraLink Subscription Status

Displays your current Acu status.

Clock

Clock/ Wallpaper Type

Clock

See Syst

Wallpaper

Clock Adjustment

Clock Format

Auto Time Zone

Auto Daylight

Clock Reset

Other Info Screen Preference

Selects the top menu whe pressed. Info Top- A brief menu Info Menu- A full men Off- A menu does not p

Default Cancels/Resets all custom Settings group as default

18 ACURA RDX NAVI-31TX48500.book 113

Data Reset

System

Setu p

1 Defaulting All the Settings

When you transfer the vehicle to a third party, reset all settings to default and delete all personal data.

The following settings will be reset: Audio preset settings Phonebook entries Other display and each item settings.

Defaulting All the Settings H SETTINGS button u System Settings u Others u Factory Data Reset

Reset all the menu and customized settings as the factory defaults. 1. Rotate to select Yes. Press .

u The confirmation message will appear.

2. Rotate to select Yes. Press again to reset the settings. u The confirmation message will

appear. Press to select OK.

113

114

18 ACURA RDX NAVI-31TX48500.book 114

18 ACURA RDX NAVI-31TX48500.book 115

Navigation

This section describes how to enter a destination, select a route to take, and follow the

route to your destination. It also describes how to change your route or destination along

the way.

15

Entering a Destination ......................... 116 Address ............................................... 118 Address Book....................................... 125 Previous Destination............................. 126 Place Category ..................................... 127 Local Search......................................... 129 Place Name.......................................... 131 Place Phone Number ............................ 134 Download POI...................................... 135 Scenic Route ........................................ 136 Intersection.......................................... 137 Map Input............................................ 138 Coordinate .......................................... 140

Calculating the Route ............................141 Viewing the Routes ...............................143

Driving to Your Destination .................144 Viewing the Route ................................144 Listening to Voice Guidance ..................149 Reaching a Waypoint ............................150

Map Menu ..............................................151 Displaying the Map Menu .....................151 Hide Traffic Flow...................................153 Directions .............................................154 Traffic ReroutingTM ................................156

Changing Your Route ............................159 Pausing the Route.................................160 Canceling the Route .............................160

1

Adding Waypoints ............................... 161 Editing the Destination List ................... 165 Taking a Detour ................................... 167 Avoiding Streets ................................... 167

Changing Your Destination ................. 168 Find Nearest Place ................................ 168 Selecting a Destination on the Map...... 169 Entering a New Destination.................. 170

Resuming Your Trip .............................. 171

116

N avig

atio n

18 ACURA RDX NAVI-31TX48500.book 116

Entering a Destination

1 Entering a Destination

If you press the MENU button when en route, the Route Option screen is displayed.

2 Changing Your Route P. 159

Prior to departure, you can set areas along your route to avoid.

2 Avoided Area P. 60

H MENU button (on map)

This section describes how to enter a destination for route guidance. Rotate to select an item. Press

. u Select More Search Methods to

display additional menu entries.

The following items are available: Address: Sets a destination by entering an address.

2 Address P. 118

Address Book: Sets a destination by selecting an address stored in your Address Book.

2 Address Book P. 125

Previous Destination: Sets a destination by selecting a previous destination. 2 Previous Destination P. 126

uuEntering a Destinationu N

avig atio

n

18 ACURA RDX NAVI-31TX48500.book 117

Go Home: Sets your home address as a destination. 2 Going Home P. 11

Place Category: Sets a destination by selecting a place/landmark. 2 Place Category P. 127

Local Search: Sets a destination by using Local Search. 2 Local Search P. 129

Place Name: Sets a destination by entering a place name. 2 Place Name P. 131

Place Phone Number: Sets a destination by entering the phone number of a place/landmark.

2 Place Phone Number P. 134

Download POI: Sets a destination by using a list of the imported POI (category and places) data you created.

2 Download POI P. 135

Scenic Route: Sets a destination by using a list of scenic roads for each state or province (U.S. and Canada only).

2 Scenic Route P. 136

Intersection: Sets a destination (intersection) by entering two streets. 2 Intersection P. 137

Map Input: Sets a destination by scrolling through the map. 2 Map Input P. 138

Coordinate: Sets a destination by entering latitude and longitude. 2 Coordinate P. 140

117

118

uuEntering a DestinationuAddress

N avig

atio n

18 ACURA RDX NAVI-31TX48500.book 118

Address H MENU button u Address

Enter an address to use as the destination. The state or province you are currently in is displayed (e.g., California).

Rotate to select an item. Press .

The following items are available: City: Selects your destination city.

2 Selecting a City P. 121

Street: Selects your destination street. 2 Selecting a Street P. 122

House Number: Enters the house number to select the street. 2 Selecting a Street by House Number P. 124

ZIP Code (U.S.)/Postal Code (Canada): Enters the zip code or postal code to select the city.

2 Selecting a City by Zip Code or Postal Code P. 120

Change State (U.S.)/Change Province (Canada): Selects the state or province. 2 Selecting the State or Province P. 119

uuEntering a DestinationuAddress N

avig atio

n

1 Selecting the State or Province

Move or to select the following areas: USA for the U.S. mainland, Alaska, Hawaii, and

Puerto Rico Canada Mexico

18 ACURA RDX NAVI-31TX48500.book 119

H MENU button u Address u Change State/Change Province

Rotate to select a state or province from the list. Press .

Selecting the State or Province

Continued 119

uuEntering a DestinationuAddress

120

N avig

atio n

1 Selecting a City by Zip Code or Postal Code

If your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.

18 ACURA RDX NAVI-31TX48500.book 120

H MENU button u Address u ZIP Code/Postal Code

1. Enter the zip code or postal code of your destination.

2. Move to select OK. Press .

3. Rotate to select the destination city from the list. Press

. u Next, you are prompted to

enter a street name. 2 Selecting a Street P. 122

Selecting a City by Zip Code or Postal Code

uuEntering a DestinationuAddress N

avig atio

n

1 Selecting a City

Vehicle position may not be displayed when: The automobile is traveling off-road. The vehicle position data cannot be updated. You do not need to enter spaces or symbols (e.g., &, -, %). Partial matches are supported (e.g., ANGELES to find LOS ANGELES).

If your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.

18 ACURA RDX NAVI-31TX48500.book 121

H MENU button u Address u City

The name of the city where you are currently located is displayed. 1. Enter the name of a different city,

or move to select OK for the current city. Press .

2. Rotate to select your destination city from the list. Press

. u A list of matching hits is

automatically displayed after you enter several letters, with the closest match at the top of the list. Matching letters are highlighted.

u Next, you are prompted to enter a street name. 2 Selecting a Street P. 122

Selecting a City

Non-detailed area mark: Try entering the street first and then select the city.

Continued 121

uuEntering a DestinationuAddress

122

N avig

atio n

1 Selecting a Street

When entering the names of major freeways/ highways, you can use the following abbreviations. For interstates, use an I (e.g., I-10). For U.S. freeways, use US (e.g., US-18). For state freeways, use the two-character state designation (e.g., CA- 101). For county roads, use the appropriate designation (e.g., G-2). For Trans-Canada and Provincial highways, use Hwy (HWY-7). For County roads, use CR (CR- 32). For Regional Roads, use RR (RR-5).

If you did not select a city first and there is more than one city with the specified street, a list of cities is displayed.

Rotate to select the desired city from the list. Press .

18 ACURA RDX NAVI-31TX48500.book 122

H MENU button u Address u Street

1. Enter the name of your destination street. u Do not enter the street type

(e.g., street, road, avenue) or direction (e.g., north, south, east, west).

u Move to select OK to display a list of streets. Press .

2. Rotate to select your destination street from the list. Press . u A list of matching hits is

automatically displayed after you enter several letters, with the closest match at the top of the list. Matching letters are highlighted.

Selecting a Street

uuEntering a DestinationuAddress N

avig atio

n

18 ACURA RDX NAVI-31TX48500.book 123

3. Enter the street number. u Only valid street numbers can

be entered. 4. Move to select OK. Press . 5. Set the route to your destination.

2 Calculating the Route P. 141

123Continued

124

uuEntering a DestinationuAddress

N avig

atio n

18 ACURA RDX NAVI-31TX48500.book 124

H MENU button u Address u House Number

1. Enter the house number. u Only a valid house number can

be entered. 2. Move to select OK. Press .

u If you did not yet select a street name, enter a street name when you are prompted.

3. Rotate to select your destination street from the list. Press . u Select a city when you are

prompted. 4. Set the route to your destination.

2 Calculating the Route P. 141

Selecting a Street by House Number

uuEntering a DestinationuAddress Book N

avig atio

n

1 Address Book

If you have PIN-protected your address book, enter your PIN when prompted. Press to select OK. PINs are optional.

2 PIN Numbers P. 47

Move and rotate to select the following items: Add New Address: Adds an entry to the address

book. 2 Adding an Address Book Entry P. 40

Sort: Selects Sort by Name or Sort by Distance. Delete All: Deletes all entries in the address book. Driver 1 or Driver 2: Displays the address book for

the selected user.

18 ACURA RDX NAVI-31TX48500.book 125

Address Book H MENU button u Address Book

Select an address stored in your address book to use as the destination. 1. Rotate to select your

destination from the list. Press . 2. Set the route to your destination.

2 Calculating the Route P. 141

u Move or to display only the entries in the categories you have created. 2 Selecting an Address Book

Category P. 42

125

126

uuEntering a DestinationuPrevious Destination

N avig

atio n

1 Previous Destination

If Previous Destination is grayed out, there are no previous destinations entered.

Your home address and addresses stored in your address book are not added to the list of previous destinations.

Move and rotate to select Delete All to delete all previous destinations.

You can delete unwanted previous destinations from the list.

2 Previous Destination P. 48

18 ACURA RDX NAVI-31TX48500.book 126

Previous Destination H MENU button u Previous Destination

Select an address from a list of your 50 most recent destinations to use as the destination. The list is displayed with the most recent destination at the top.

1. Rotate to select a destination from the list. Press .

2. Set the route to your destination. 2 Calculating the Route P. 141

uuEntering a DestinationuPlace Category N

avig atio

n

1 Place Category

This option is convenient if you do not know the exact name of a place or if you want to narrow down the number of matches returned for places with a common name.

Move to select Category History to access your recently used place categories. Up to 30 categories can be stored.

You can also delete your recently used place categories.

2 Category History P. 49

Search POI Categories helps you to search the subcategory. When you enter a keyword and select OK, the list of appropriate subcategories is displayed.

18 ACURA RDX NAVI-31TX48500.book 127

Place Category H MENU button u Place Category

Select the category of a place (e.g., Banking, Lodging, Restaurant) stored in the map database to search for the destination.

1. Rotate to select a category. Press .

2. Rotate to select a subcategory. Press .

127Continued

uuEntering a DestinationuPlace Category

128

N avig

atio n

1 Place Category

The straight line distance (as the crow flies, not driving distance) and direction to the destination are shown for the highlighted place.

18 ACURA RDX NAVI-31TX48500.book 128

3. Rotate to select an item. Press .

The following items are available: Search by Name: Searches for a place in the subcategory by name. Enter a place

name when prompted. Sort by Distance to Travel: Displays all the places in the subcategory sorted by

distance from your current location. The closest place is displayed at the top. City Vicinity: Searches for a place in the subcategory within a 20 mile (32 km)

radius of a specific city. Enter a city name when prompted and then select a city. Only the first 1000 matching places/landmarks are displayed.

4. Rotate to select a destination from the list. Press .

5. Set the route to your destination. 2 Calculating the Route P. 141

uuEntering a DestinationuLocal Search N

avig atio

n

1 Local Search

When you select Search by keyword, the list of appropriate categories is displayed.

The screen in this section may differ from the actual ones.

Local Search is a subscription service. For more information, contact an Acura dealer or visit owners.acura.com (U.S.) or www.acura.ca/owners/ acuralink (Canada).

18 ACURA RDX NAVI-31TX48500.book 129

Local Search H MENU button u Local Search

Select a place via Local Search database as the destination. 1. Rotate to select a category

(e.g., Community). Press .

2. Rotate to select a subcategory. Press .

129Continued

130

uuEntering a DestinationuLocal Search

N avig

atio n

18 ACURA RDX NAVI-31TX48500.book 130

3. Rotate to select an item. Press .

4. Set the route to your destination. 2 Calculating the Route P. 141

The following items are available: Search Nearby: Finds the nearest POI around your vehicle. Search from Map: Selects a POI by scrolling the Interface Dial on the map

screen. Search from Destination: Selects a POI around the destination. Search the

category by scrolling the Interface Dial.

uuEntering a DestinationuPlace Name N

avig atio

n

18 ACURA RDX NAVI-31TX48500.book 131

Place Name H MENU button u Place Name

Enter the name of a place (e.g., business, hotel, restaurant) stored in the map database to use as the destination.

1. Enter a place name. 2. Move to select OK to display a

list of matching hits. Press .

3. Rotate to select a place name from the list. Press . u If the place name is in multiple

categories, the categories are displayed when you select it. 2 Place Name in Multiple

Categories P. 132

4. Set the route to your destination. 2 Calculating the Route P. 141

131Continued

uuEntering a DestinationuPlace Name

132

N avig

atio n

1 Place Name in Multiple Categories

Matching letters are in highlighted.

18 ACURA RDX NAVI-31TX48500.book 132

If the place name is in multiple categories in the map database, the following screen is displayed.

1. Rotate to select a place name. Press .

2. Rotate to select a subcategory. Press .

Place Name in Multiple Categories

uuEntering a DestinationuPlace Name N

avig atio

n

1 Place Name in Multiple Categories

Move to select Sort by City or Sort by Distance.

18 ACURA RDX NAVI-31TX48500.book 133

3. Rotate to select a place. Select and press .

4. Set the route to your destination. 2 Calculating the Route P. 141

133

134

uuEntering a DestinationuPlace Phone Number

N avig

atio n

1 Place Phone Number

All 10 digits must be entered.

Phone numbers of private residences entered in your address book are not stored in the database and thus cannot be used to search for a destination.

A list is displayed if there are multiple locations in the database with the same phone number. Rotate to select a place from the list. Press .

18 ACURA RDX NAVI-31TX48500.book 134

Place Phone Number H MENU button u More Search Methods u Place Phone Number

Select a destination by phone number. Only phone numbers in the database are recognized.

1. Enter the area code and phone number.

2. Rotate to select OK. Press . 3. Set the route to your destination.

2 Calculating the Route P. 141

uuEntering a DestinationuDownload POI N

avig atio

n

1 Download POI

Move and rotate to select the following items: Import from USB: Imports POI data into the

navigation system. 2 Importing POI Categories P. 50

Delete All: Deletes all POI entries. Help with Feature: Views tips for the Download

POI feature.

If you select From AcuraLink, you can download POI data stored on the AcuraLink server.

18 ACURA RDX NAVI-31TX48500.book 135

Download POI H MENU button u More Search Methods u Download POI

Select a place imported into the navigation system as the destination. 1. Rotate to select a category

from the list. Press .

2. Rotate to select a place. Press .

3. Set the route to your destination. 2 Calculating the Route P. 141

135

136

uuEntering a DestinationuScenic Route

N avig

atio n

1 Scenic Route

If you select a scenic road that runs through multiple states or provinces, only the portion of the road in the selected state or province is displayed.

18 ACURA RDX NAVI-31TX48500.book 136

Scenic Route H MENU button u More Search Methods u Scenic Route

Select a scenic road as a destination (U.S. and Canada only). 1. Rotate to select a state/

province. Press .

2. Rotate to select a scenic road. Press .

3. Set the route to your destination. 2 Calculating the Route P. 141

uuEntering a DestinationuIntersection N

avig atio

n

1 Intersection

It is usually easier to select Street to find the streets first. The city or cities that the streets are in will be displayed. If you select City and your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.

If the intersection is outside the state or province you are currently in, rotate to select Change State/ Change Province.

2 Selecting the State or Province P. 119

If there is more than one intersection, you are prompted to select the intersection. If the two streets that you have selected do not intersect, no intersection is entered.

18 ACURA RDX NAVI-31TX48500.book 137

Intersection H MENU button u More Search Methods u Intersection

Select the intersection of two streets as the destination. The state or province for your current location is displayed at the top of the screen (e.g., California).

1. Rotate to select the intersection search method. Press

. 2. Set the route to your destination.

2 Calculating the Route P. 141

The following options are available: City: Selects the city where the intersection is located. You are prompted to enter

the name of the two intersecting streets. 2 Selecting a City P. 121

Street: Selects the two intersecting streets. The city or cities that the streets are located in are displayed.

2 Selecting a Street P. 122

Change State (U.S.)/Change Province (Canada): Selects the state or province. 2 Selecting the State or Province P. 119

137

138

uuEntering a DestinationuMap Input

N avig

atio n

18 ACURA RDX NAVI-31TX48500.book 138

Map Input H MENU button u More Search Methods u Map Input

Use the Interface Dial to manually select an icon or a location on the map screen as the destination. You are prompted to define the map area to display.

1. Rotate to select an item. Press .

The following items are available: Current Position: Your current location is centered on the map. State (U.S.)/Province (Canada): You are prompted to select the state or

province. 2 Selecting the State or Province P. 119

City: You are prompted to select the city. 2 Selecting a City P. 121

USA, Canada and Mexico: Your current location is displayed on a map of the country.

uuEntering a DestinationuMap Input N

avig atio

n

1 Map Input

Auto Zoom Press repeatedly on the map to zoom in (to the scale 1/4 mile (400 m)) while scrolling the map.

Information icons are displayed at scales from 1 mile to 1/4 mile (1.6 km to 400 m). Place/landmark icons are displayed at 1/8 mile (200 m) or less. Roads are displayed at 1/4 mile (400 m) or less.

If you select multiple icons within the cursor radius, you are prompted to select one of the items from a list.

2 Selecting a Destination on the Map P. 169

18 ACURA RDX NAVI-31TX48500.book 139

2. Scroll the map to position the cursor over your desired destination, adjusting the map scale as necessary. u If the address is not the desired

location, scroll the map to another location and try again.

3. Press to display the route calculation menu.

2 Calculating the Route P. 141

4. Rotate to select Set as Destination. Press .

139

140

uuEntering a DestinationuCoordinate

N avig

atio n

1 Coordinate

Latitude and longitude must be entered up to the seconds value.

18 ACURA RDX NAVI-31TX48500.book 140

Coordinate H MENU button u More Search Methods u Coordinate

Specify a location using latitude and longitude map coordinates. 1. Enter the latitude and select OK. 2. Enter the longitude and select OK.

3. Move to scroll the map to position the cursor over your desired destination, adjusting the map scale as necessary. u If the address is not the desired

location, scroll to another location and try again.

4. Press to display the route calculation menu.

2 Calculating the Route P. 141

5. Rotate to select Set as Destination. Press .

18 ACURA RDX NAVI-31TX48500.book 141

Calculating the Route

N

avig atio

n

1 Calculating the Route

The straight line distance (as the crow flies, not driving distance) and direction to the destination are shown.

You cannot use voice commands while the system is calculating the route.

Search Nearby You can find the nearest place/landmark (e.g., nearest gas station) by specifying a category.

2 Find Nearest Place P. 168

Call You can place a telephone call to the destination phone number.

2 Bluetooth HandsFreeLink P. 252

Save to Address Book You can add the destination address to the address book.

2 Adding an Address Book Entry P. 40

Edit/Delete Entry You can edit or delete the address book entry.

2 Editing an Address Book Entry P. 42 2 Deleting an Address Book Entry P. 43

This section describes how to calculate your route. 1. Rotate to select Set as

Destination. Press . u The system calculates and

displays the route line on the map screen.

2 Route Line P. 146

u Move to scroll the map around the destination.

The following options are available: View Routes: Displays three different routes.

2 Viewing the Routes P. 143

Route Preference: Move to select Route Preference to change the route preferences (calculating method).

2 Route Preference P. 54

141Continued

uuCalculating the Routeu

142

N avig

atio n

1 Calculating the Route

Edit Home Entry You can edit your home address entry.

2 Home Address P. 46

More Info You can view detailed information about the destination.

18 ACURA RDX NAVI-31TX48500.book 142

2. Follow the route guidance to your destination.

2 Driving to Your Destination P. 144

u The system provides you with pop-up messages if your route passes through unverified areas, avoid areas, or areas with traffic restrictions.

uuCalculating the RouteuViewing the Routes N

avig atio

n

1 Viewing the Routes

It is not unusual for some calculated route options to be identical.

Server Routes is a subscription service. For more information, contact an Acura dealer or visit owners.acura.com (U.S.) or www.acura.ca/owners/ acuralink (Canada).

18 ACURA RDX NAVI-31TX48500.book 143

Viewing the Routes View three different routes to your destination.

Rotate to select a route. Press .

u The travel distance and estimated travel time is displayed for each route.

u The system calculates and displays the route line on the map screen.

2 Route Line P. 146

Using the server route

The following items are available: Quick: Displays the route with the shortest travel time. Direct: Displays the route with the shortest travel distance. Eco: Displays the route with the best fuel efficiency.

143

144

N avig

atio n

18 ACURA RDX NAVI-31TX48500.book 144

Driving to Your Destination

1 Viewing the Route

You can change the map scale by rotating .

If you scroll the map while en route, the time and distance to destination indicators are replaced with an indicator showing distance from the current vehicle position.

You can display only the map screen or a split map- guidance screen.

2 Guidance Mode P. 63

This section describes how to follow the route guidance to your destination, receive traffic information and choose the icons displayed on the map screen.

Viewing the Route

After calculating the route to your destination, the route is displayed on the map screen.

2 Map Screen Legend P. 9

As you drive, the system tracks your position on the map in real time and provides guidance as you approach each guidance point on the route.

2 During Route Guidance P. 10

Map Screen

uuDriving to Your DestinationuViewing the Route N

avig atio

n

1 Guidance Screen

A visual guide helps you check the guidance screen. 2 Guidance Screen P. 10

Turn-by-Turn Directions The next guidance point appears on the multi- information display.

2 Turn-by-Turn Directions P. 10

You can turn this feature on or off using the multi- information display. See the Owners Manual for instructions.

18 ACURA RDX NAVI-31TX48500.book 145

The guidance screen offers an alternative way to view your route. u The next guidance point is

displayed as you approach each guidance point on the route.

u You can also view a list of guidance directions.

Guidance Screen

Continued 145

uuDriving to Your DestinationuViewing the Route

146

N avig

atio n

1 Route Line

You can set Unverified Routing to Off to follow your own route to the destination. If Unverified Routing is On, be aware that unverified streets may not be displayed accurately.

2 Unverified Routing P. 56

The route line may also consist of red, orange, or green segments when traffic information is displayed.

2 AcuraLink Real-Time TrafficTM P. 14 2 Traffic ReroutingTM P. 156

18 ACURA RDX NAVI-31TX48500.book 146

When driving on verified streets, the route line is light blue. The route line display changes when driving on unverified streets:

If Unverified Routing is Off, the route line uses verified streets only (when possible). If Straight Line Guide is set to On, a pink vector line pointing directly towards your destination is displayed.

2 Straight Line Guide P. 78

If Unverified Routing is On, the route line changes to a blue-pink line to indicate that the route line uses unverified streets.

Route Line

Straight line guide

Blue-pink route line

uuDriving to Your DestinationuViewing the Route N

avig atio

n

18 ACURA RDX NAVI-31TX48500.book 147

If you leave the calculated route, the system automatically recalculates a route to the desired destination based on your current location and direction.

2 Route Preference P. 54

Deviating From the Planned Route

147Continued

uuDriving to Your DestinationuViewing the Route

148

N avig

atio n

1 Tracking Dots

A message Not on a digitized road may appear when you drive 1/2 mile (800 m) away from a mapped road.

Breadcrumbs may occasionally be displayed in urban areas, such as large parking lots in shopping malls, in new subdivisions where the roads are not yet in the database, or in areas where a GPS signal is unavailable, such as in a parking garage.

Breadcrumbs are limited to approximately 150 miles (240 km). Breadcrumbs at the beginning of the trail are deleted if you exceed that distance.

Breadcrumbs are displayed only at 1/20, 1/8, 1/4, and 1/2 mile (80, 200, 400, and 800 m) map scales.

18 ACURA RDX NAVI-31TX48500.book 148

You can display a series of dots (breadcrumbs) to track the path you are taking. If needed, you can follow the dots back to the mapped road you originally left.

2 Display Tracking P. 84

Tracking Dots

uuDriving to Your DestinationuListening to Voice Guidance N

avig atio

n

1 Listening to Voice Guidance

You can turn voice guidance OFF if you prefer. On the map screen, press to display the Map Menu. Select Guidance Volume and adjust the volume level to 0. You can also adjust Guidance Volume by rotating the volume knob or using the VOL buttons on the steering wheel during route guidance or voice command confirmations.

When driving in unverified areas, the phrase if possible is inserted before each voice guidance prompt.

Voice in the Map Menu may be grayed out if: The system is in process of gathering the route

guidance information. The vehicle is out of the road (e.g., pulling in a

parking lot).

The timing of voice guidance varies depending on the type of road you are on and the distance to the next guidance point.

18 ACURA RDX NAVI-31TX48500.book 149

Listening to Voice Guidance H ENTER button (on map) u Voice

As you approach each guidance point, a pop-up window is displayed on the map screen with instructions for you to follow. Voice guidance for each guidance point is also provided. Typically, you hear three prompts: 1/2 mile (800 m) from the guidance point (2 miles (3 km) on freeway/highway) 1/4 mile (400 m) from the guidance point (1 mile (1.5 km) on freeway/highway) Just before the guidance point To replay voice guidance, rotate to select Voice in the Map Menu. If you select Voice between guidance points, voice guidance for the next guidance point is provided.

149

150

uuDriving to Your DestinationuReaching a Waypoint

N avig

atio n

18 ACURA RDX NAVI-31TX48500.book 150

Reaching a Waypoint When you reach a waypoint, a pop-up message is displayed. You can continue or pause the route guidance.

Rotate to select No to pause the route guidance. Press . u Select Yes to continue the

guidance.

You can resume the route guidance in the following ways: Restart the engine when you stop your car (e.g., to rest, stop for gas, etc.).

2 Resuming Your Trip P. 171

Select Resume Guidance from the navigation menu or the map menu. 2 Map Menu P. 151 2 Changing Your Route P. 159

Resuming the Route Guidance

18 ACURA RDX NAVI-31TX48500.book 151

Map Menu

N

avig atio

n

1 Map Menu

If you scroll the map while en route, press the NAV (or BACK) button to return to the current position map screen, then press .

Traffic Incidents You must have an AcuraLink Real-Time TrafficTM subscription to receive traffic information.

2 AcuraLink P. 298

The incident icons are displayed on the 5 mile (8 km) or less map scale.

2 Map Scale and Functions P. 81

Displaying the Map Menu Use the Map Menu to control the icons displayed on the screen and to display traffic information and messages. You can also use the Map Menu to find locations or to cancel the route.

1. On the map screen, press . u The Map Menu is displayed on

the map screen.

2. Rotate to select an item. Press .

151Continued

uuMap MenuuDisplaying the Map Menu

152

N avig

atio n

1 Map Menu

Directions The system provides freeway/highway exit information only in the U.S.

18 ACURA RDX NAVI-31TX48500.book 152

The following items are available: Voice: Select to hear the voice guidance when en route.

2 Listening to Voice Guidance P. 149

Guidance Volume: Adjusts the navigation system volume level. 2 Sound and Beep Settings P. 27

Map/Guidance: Allows you to select the map and guidance settings (display mode, icons to display on the map, map orientation, map color, and 3D view angle), display your current location and an overview of the map features.

2 Guidance Mode P. 63 2 Showing Icons on Map P. 71 2 Color P. 73 2 View (Map Orientation) P. 76 2 3D Angle Adjustment P. 77 2 Current Location P. 79 2 Map Legend P. 80

Pause Guidance: Pauses your current route. 2 Pausing the Route P. 160

Resume Guidance: Resumes your current route. This item is displayed while the route guidance is paused.

Hide Traffic Flow: Hides the current traffic flow indicator on the map screen. 2 Hide Traffic Flow P. 153

Display Traffic Flow: Displays the current traffic flow indicator on the map screen. This item is displayed while the current traffic flow indicator is hidden.

Directions: Displays a list of the guidance points. 2 Directions P. 154

Search Nearby: Allows you to find the nearest place/landmark (e.g., nearest gas station) by specifying a category. You can then add the location to the list of destinations, set as a waypoint, or set as your destination.

2 Find Nearest Place P. 168

uuMap MenuuHide Traffic Flow N

avig atio

n

18 ACURA RDX NAVI-31TX48500.book 153

Traffic Incidents: Displays a list of the traffic incidents around your current location or on your current route.

2 Traffic ReroutingTM P. 156

Hide Traffic Flow H ENTER button (on map) u Hide Traffic Flow

Hide the traffic flow indicator on the map screen. Press the ENTER button and select Display Traffic Flow to display the traffic flow indicator on the map screen.

153

154

uuMap MenuuDirections

N avig

atio n

1 Directions

Guidance points with exit information are indicated by a (freeway/highway exit information) icon. Move to select Exit Info to display the exit information.

2 Freeway/Highway Exit Information P. 155

The system provides freeway/highway exit information only in the U.S.

The route guidance information is automatically deleted when you reach your destination.

18 ACURA RDX NAVI-31TX48500.book 154

Directions H ENTER button (on map) u Directions

Display a list of the guidance points on your route for your confirmation. 1. Rotate to select a guidance

point from the list. Press . u The system displays a map of

the guidance point.

2. Press to select Back to list or press the BACK button to return to the previous screen.

uuMap MenuuDirections N

avig atio

n

1 Freeway/Highway Exit Information

You can scroll the map and select a (Freeway/ Highway exit information) icon on the map screen to display the Freeway/Highway exit information. The

icon is only displayed if there is exit information available.

Icons are displayed only at 1/4, 1/2, or 1 mile (400 m, 800 m, or 1.6 km) scale.

2 Map Scale and Functions P. 81

The system provides freeway/highway exit information only in the U.S.

The route guidance information is automatically deleted when you reach your destination.

18 ACURA RDX NAVI-31TX48500.book 155

H ENTER button (on map) u Directions u Exit Info

Display a list of the Freeway/highway exits for the route. You can view freeway/ highway exit information (whether the exit is near gas stations, restaurants, ATMs, etc.) and add new destinations or waypoints to the calculated route.

1. Rotate to select an exit from the list. Press .

2. Rotate to select a list item. Press . u Move or to display

information for different exits. u You can set the route to your

destination. 2 Calculating the Route P. 141

Freeway/Highway Exit Information

155

156

uuMap MenuuTraffic ReroutingTM

N avig

atio n

1 Traffic ReroutingTM

This feature requires an AcuraLink Real-Time TrafficTM subscription.

AcuraLink Real-Time TrafficTM is a subscription service. For more information, contact an Acura dealer or visit owners.acura.com (U.S.) or www.acura.ca/owners/acuralink (Canada).

Automatic traffic rerouting may not provide a detour route depending on circumstances.

18 ACURA RDX NAVI-31TX48500.book 156

Traffic ReroutingTM

When driving to your destination, the system automatically searches for a faster route based on traffic flow information and traffic incidents.

2 AcuraLink Real-Time TrafficTM P. 14 2 Traffic Rerouting P. 58

uuMap MenuuTraffic ReroutingTM N

avig atio

n

1 Traffic ReroutingTM Manually

You can choose to avoid up to 10 traffic incidents. It is not always possible for the system to calculate a route that avoids all traffic incidents or specific traffic incidents you select.

The On Route tab on the Traffic List screen is only available during route guidance.

You cannot select an incident to avoid from the All tab.

You can also manually detour around a traffic incident or unexpected delay even if you do not have an AcuraLink Real-Time TrafficTM subscription or the delay does not yet appear on your display.

2 Taking a Detour P. 167

18 ACURA RDX NAVI-31TX48500.book 157

H ENTER button (on map) u Traffic Incidents

Manually avoid specific incidents and/or congestion on your route: 1. Rotate to select an incident

from the list. Press . u The system displays the map

screen and the incident location.

2. Rotate to select Avoid. Press .

u Repeat step 1 to 2 as necessary.

Traffic ReroutingTM Manually

Continued 157

158

uuMap MenuuTraffic ReroutingTM

N avig

atio n

18 ACURA RDX NAVI-31TX48500.book 158

3. Move to select Recalculate Route. Press . u The system recalculates a

detour route that avoids the traffic incidents.

18 ACURA RDX NAVI-31TX48500.book 159

Changing Your Route

N

avig atio

n

1 Changing Your Route

If you press the MENU button when not en route, the Destination Menu screen is displayed.

2 Entering a Destination P. 116

H MENU button (when en route)

This section describes how to alter your route, add an interim waypoint (pit stop), choose a different destination, cancel your current destination, and continue your trip after stopping.

Rotate to select an item. Press .

The following items are available: Voice: Select to hear the voice guidance when en route.

2 Listening to Voice Guidance P. 149

Destination List: Shows a list of waypoints. You can delete waypoints or edit the order of them.

2 Editing the Destination List P. 165

Pause Guidance: Pauses your current route. 2 Pausing the Route P. 160

Resume Guidance: Resumes your current route. This item is displayed while the route guidance is paused.

Cancel Route: Cancels the route guidance. 2 Canceling the Route P. 160

View Routes: Displays three different routes. 2 Viewing the Routes P. 143

159Continued

uuChanging Your RouteuPausing the Route

160

N avig

atio n

1 Pausing the Route

You can also pause your route from the Map Menu. 2 Map Menu P. 151

18 ACURA RDX NAVI-31TX48500.book 160

Change Route Preference: Changes the route preferences (calculating method).

2 Route Preference P. 54

Detour: Calculates a detour route. 2 Taking a Detour P. 167

Avoid Streets: Avoids streets along your route. 2 Avoiding Streets P. 167

Pausing the Route H MENU button (when en route) u Pause Guidance

Pause the route guidance and return to the map screen. The destination icons and all waypoint flags remain displayed on the map. Press the MENU button when en route and select Resume Guidance to resume the route guidance.

Canceling the Route H MENU button (when en route) u Cancel Route

Cancel the route guidance and remove the destination and all waypoints from the destination list. The system then returns to the map screen.

uuChanging Your RouteuAdding Waypoints N

avig atio

n

1 Adding Waypoints

Waypoints allow you to stop for gas or food, for example, and then continue on to your destination.

Press the NAV button to return to the map screen without adding a waypoint at any time.

The search corridor used for adding waypoints can be adjusted.

2 Edit POI Search Radius Along Route P. 59

You can delete waypoints or edit the order of waypoints in the destination list.

2 Editing the Destination List P. 165

18 ACURA RDX NAVI-31TX48500.book 161

Adding Waypoints Add up to four waypoints (pit stops) along the route to your destination.

Waypoints are displayed on the map screen as small, numbered red flags. The route follows the waypoints in the order they are listed in the Destination List.

161Continued

uuChanging Your RouteuAdding Waypoints

162

N avig

atio n

1 Adding Waypoints from the Route Menu

Search method

Search around method

Search along method 2 mi (3 km)

18 ACURA RDX NAVI-31TX48500.book 162

H MENU button (when en route) u Destination List u Add New Destination u Find Along Route

1. Rotate to select a search method to add a waypoint. Press

.

The following items are available: Search Around: Searches in a spiral pattern around the location you select. Search Along: Searches within a corridor on either side of the locations you

select. 2. Rotate to select a waypoint

category (e.g., GAS STATION). Press .

Adding Waypoints from the Route Menu

uuChanging Your RouteuAdding Waypoints N

avig atio

n

18 ACURA RDX NAVI-31TX48500.book 163

3. Rotate to select a place. Press .

u The waypoint is added to the Destination List.

4. Rotate to select a location and move the order of destinations. Press .

5. Move and rotate to select Start Route. Press . u The route is automatically

recalculated and displayed on the map screen.

163Continued

uuChanging Your RouteuAdding Waypoints

164

N avig

atio n

1 Adding Waypoints from the Navigation Menu

You can edit the order of waypoints and destination. 2 Editing the Destination List P. 165

18 ACURA RDX NAVI-31TX48500.book 164

H MENU button (when en route) u Destination List u Add New Destination

1. Rotate to select a method to enter a waypoint.

2 Entering a Destination P. 116

u A new destination is added to the end of the Destination list.

2. Move and rotate to select Start Route. Press . u The route is automatically

recalculated and displayed on the map screen.

Adding Waypoints from the Navigation Menu

uuChanging Your RouteuEditing the Destination List N

avig atio

n

1 Editing the Order of Waypoints

Move to rotate to select Show All on Map to display the destination and waypoints on the map screen.

18 ACURA RDX NAVI-31TX48500.book 165

Editing the Destination List

H MENU button (when en route) u Destination List

1. Move and rotate to select Edit Order. Press .

2. Rotate to select a list item to move. Press .

3. Rotate to select a new location. Press .

4. Move and rotate to select Start Route. Press . u The route is automatically

recalculated and displayed on the map screen.

Editing the Order of Waypoints

165Continued

uuChanging Your RouteuEditing the Destination List

166

N avig

atio n

1 Deleting Waypoints

Move and rotate to select Delete All to delete the destination and all the waypoints.

Select Show on Map to display the waypoint on the map screen.

18 ACURA RDX NAVI-31TX48500.book 166

H MENU button (when en route) u Destination List

1. Rotate to select a list item to delete. Press .

2. Rotate to select Delete. Press .

3. Rotate to select Yes. Press .

Deleting Waypoints

uuChanging Your RouteuTaking a Detour N

avig atio

n

1 Taking a Detour

The detour option is convenient if you encounter an unexpected obstacle such as a road closure or extremely heavy traffic congestion.

1 Avoiding Streets

Avoiding certain streets is convenient if you know of road construction, road closures, or excessive traffic along the route.

You cannot choose specific streets you want to use, only those to avoid. However, you can select intersections or waypoints (places/landmarks) that the system will use in your route.

2 Adding Waypoints P. 161

You can store up to 10 streets to avoid. You cannot avoid your current street or the streets of your waypoint(s) or destination (system beeps if selected).

18 ACURA RDX NAVI-31TX48500.book 167

Taking a Detour H MENU button (when en route) u Detour

Calculate a detour route manually. The system attempts to calculate a new route by avoiding the next 5 miles (8 km) (while on a freeway/highway) or 1 mile (1.6 km) (while on a surface street).

Avoiding Streets H MENU button (when en route) u Avoid Streets

Select a street or streets along your route to avoid. 1. Rotate to select the street you

want to avoid. Press . u Repeat the procedure to avoid

other streets.

2. Move to select Recalculate Route. Press . u The system calculates a new

route.

167

168

N avig

atio n

18 ACURA RDX NAVI-31TX48500.book 168

Changing Your Destination

There are several methods you can use to change the route destination.

Find Nearest Place H ENTER button (on map) u Search Nearby

Search for the nearest place/landmark on the map screen and set it as your destination.

1. Rotate to select Search Nearby. Press .

2. Rotate to select a category type. Press .

3. Rotate to select a place. Press .

4. Rotate to select Set as Destination. Press .

5. Move to select Clear Current Route. Press . u The route is automatically

recalculated and displayed on the map screen.

u Rotate to edit the order to set the location as a new waypoint. Press .

uuChanging Your DestinationuSelecting a Destination on the Map N

avig atio

n

1 Selecting a Destination on the Map

If there is more than one icon or street under the map cursor, you are prompted to select the item from a list.

Rotate to select an item. Press .

18 ACURA RDX NAVI-31TX48500.book 169

Selecting a Destination on the Map Select a new destination when en route by selecting a location on the map.

1. Scroll the map to position the cursor over your desired destination, adjusting the map scale as necessary. Press . u If the address displayed is not

the desired location, press the BACK button and repeat the procedure.

2. Rotate to select Set as Destination. Press .

2 Calculating the Route P. 141

3. Move to select Clear Current Route. Press . u The route is automatically

recalculated and displayed on the map screen.

u Rotate to edit the order to set the location as a new waypoint. Press .

169

170

uuChanging Your DestinationuEntering a New Destination

N avig

atio n

18 ACURA RDX NAVI-31TX48500.book 170

Entering a New Destination H MENU button (when en route) u Destination

Enter a new destination using the Destination Menu screen even when you are en route.

1. Rotate to select a method to enter a new destination.

2 Entering a Destination P. 116

u After entering a new destination, the address is displayed on the Calculate Route screen.

2. Rotate to select Set as Destination. Press .

3. Move to select Clear Current Route. Press . u The route is automatically

recalculated and displayed on the map screen.

u Rotate to edit the order to set the location as a new waypoint. Press .

18 ACURA RDX NAVI-31TX48500.book 171

Resuming Your Trip

N

avig atio

n

1 Resuming Your Trip

The Continue Trip screen has the same options as when you calculate a route.

2 Calculating the Route P. 141

You can also cancel your destination by pressing any hard button except the button.

Search Nearby You can find the nearest place/landmark (e.g., nearest gas station) by specifying a category.

2 Find Nearest Place P. 168 Call You can place a telephone call to the destination phone number.

2 Bluetooth HandsFreeLink P. 252 Save to Address Book You can add the destination address to the address book.

2 Adding an Address Book Entry P. 40 Edit/Delete Entry You can edit or delete the address book entry.

2 Editing an Address Book Entry P. 42 2 Deleting an Address Book Entry P. 43

Edit Home Entry You can edit your home address entry.

2 Home Address P. 46 More Info You can view detailed information about the destination.

Stop your vehicle en route (e.g., to rest, stop for gas, etc.), and then continue on your route. If you did not complete your route, the Continue Trip screen is displayed when you restart your vehicle.

Rotate to select Set as Destination. Press . u You can continue on the same

route. u Move to scroll the map

around the destination. u Press the BACK button to cancel

your destination.

View Routes: Displays three different routes. 2 Viewing the Routes P. 143

Route Preference: Move to select Route Preference to change the route preferences (calculating method).

2 Route Preference P. 54

171

172

18 ACURA RDX NAVI-31TX48500.book 172

18 ACURA RDX NAVI-31TX48500.book 173

Audio

This section describes how to operate the audio system. You can play music from a wide

array of media sources, and control the audio system using the audio buttons, the

Interface Dial, or voice control.

73

Audio System .................................................. 174 About Your Audio System.............................. 174 USB Port ........................................................ 175 Auxiliary Input Jack ........................................ 176 Audio System Theft Protection ....................... 176 Setting Audio Shortcuts ................................. 177 Customizing Audio Source ............................. 178

Audio Remote Controls .................................. 179 Steering Wheel Controls ................................ 179

Audio Settings ................................................. 181 Adjusting the Sound ...................................... 183

Playing FM/AM Radio ..................................... 184 Selecting FM/AM Mode.................................. 184 Audio Screen Control..................................... 185 Audio Menu .................................................. 188

Playing SiriusXM Radio ................................. 190 Selecting SiriusXM Mode.............................. 190 Audio Screen Control..................................... 191

Audio Menu...................................................200 SiriusXM Radio Service..................................203

Playing a Disc ...................................................205 Selecting Disc Mode .......................................205 Audio Screen Control .....................................206 Audio Menu...................................................207 Recommended CDs........................................210

Playing Hard Disc Drive (HDD) Audio ............212 Selecting HDD Mode ......................................212 Recording a Music CD to HDD........................213 Audio Screen Control .....................................214 Audio Menu...................................................215

Playing an iPod ................................................224 Selecting iPod Mode.......................................225 Audio Screen Control .....................................226 Audio Menu...................................................228 Song By VoiceTM (SBV) ....................................231

1

Playing Internet Radio .................................... 236 Selecting Internet Radio Mode ....................... 236 Pandora Menu* ............................................ 237 AhaTM Radio Menu......................................... 239

Playing a USB Flash Drive ............................... 241 Selecting USB Mode....................................... 242 Audio Screen Control..................................... 243 Audio Menu .................................................. 244

Playing Bluetooth Audio .............................. 247 Selecting Bluetooth Audio Mode.................. 247 Audio Screen Control..................................... 248

174

A u

d io

18 ACURA RDX NAVI-31TX48500.book 174

Audio System

1 About Your Audio System

SiriusXM Radio is available on a subscription basis only. For more information on SiriusXM Radio, contact a dealer.

2 SiriusXM Radio Service P. 203

SiriusXM Radio is available in the U.S. and Canada, except Hawaii, Alaska, and Puerto Rico.

SiriusXM is a registered trademark of SiriusXM Radio, Inc.

Video CDs, DVDs, and 3 in (80 mm) mini CDs are not supported.

iPod, iPhone and iTunes are trademarks of Apple Inc.

State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.

When the screen is viewed through polarized sunglasses, a rainbow pattern may appear on the screen due to optical characteristics of the screen. If this is disturbing, please operate the screen without polarized sunglasses.

About Your Audio System The audio system features AM/FM radio and the SiriusXM Radio service. It can also play audio CDs, WMA/MP3/AAC files, Hard Disc Drive (HDD) audio, USB flash drives, iPod, iPhone and Bluetooth devices. You can operate the audio system from the buttons and switches on the panel, the icons on the touchscreen interface.

Remote Controls

iPod

USB Flash Drive

uuAudio SystemuUSB Port A

u d

io

1 USB Port

Do not leave the iPod or USB flash drive in the vehicle. Direct sunlight and high temperatures may damage it.

Do not connect the iPod or USB flash drive using a hub.

Do not use a device such as a card reader or hard disc drive, as the device or your files may be damaged.

We recommend backing up your data before using the device in your vehicle.

Displayed messages may vary depending on the device model and software version.

If the audio system does not recognize the iPod, try reconnecting it a few times or reboot the device. To reboot, follow the manufacturers instructions provided with the iPod or visit www.apple.com/ipod.

18 ACURA RDX NAVI-31TX48500.book 175

USB Port Install the iPod or iPhone dock connector or the USB flash drive to the USB port.

175

176

uuAudio SystemuAuxiliary Input Jack

A u

d io

1 Auxiliary Input Jack

You can return to the AUX mode by selecting Change Source on the Audio menu screen or Audio Source on the On Demand Multi-Use DisplayTM.

18 ACURA RDX NAVI-31TX48500.book 176

Auxiliary Input Jack Use the jack to connect standard audio devices. 1. Open the AUX cover. 2. Connect a standard audio device

to the input jack using a 1/8 in (3.5 mm) stereo miniplug. u The audio system automatically

switches to the AUX mode.

Audio System Theft Protection The audio system is disabled when it is disconnected from the power source, such as when the battery is disconnected or goes dead. In certain conditions, the system may display Enter code. If this occurs, reactivate the audio system.

1. Set the power mode to ON. 2. Turn on the audio system. 3. Press and hold the (Power) button for more than two seconds.

u The audio system is reactivated when the audio control unit establishes a connection with the vehicle control unit. If the control unit fails to recognize the audio unit, you must go to a dealer and have the audio unit checked.

Reactivate the Audio System

uuAudio SystemuSetting Audio Shortcuts A

u d

io

1 Setting Audio Shortcuts

You can also preset a station or song by pressing and holding the preset icon you want to store that station or song after step 3.

18 ACURA RDX NAVI-31TX48500.book 177

Setting Audio Shortcuts You can store up to six radio stations, and HDD audio album/play lists when playing AM, FM, SiriusXM radio, or HDD audio.

1. Select Shortcuts. 2. Tune to a radio station or select a

song. 2 Playing FM/AM Radio P. 184 2 Playing SiriusXM Radio

P. 190 2 Playing Hard Disc Drive (HDD)

Audio P. 212

3. Select Audio. 4. Select Edit or No Entry.

u If you select No Entry, go to step 6.

5. Select Add. 6. Select the preset icon you want to

store the station or song to.

Storing a Station or Song

177Continued

uuAudio SystemuCustomizing Audio Source

178

A u

d io

1 Customizing Audio Source

This operation is not allowed while the vehicle is in motion.

18 ACURA RDX NAVI-31TX48500.book 178

1. Select Shortcuts. 2. Select Audio. 3. Select Edit. 4. Select Delete. 5. Select the preset icon with the radio station or a song you want to delete.

Customizing Audio Source You can customize order of the source list icons.

1. Select Audio Source. 2. Select Edit Order from the second

screen. 3. Select two icons you want to

swap. 4. Select Done.

u Select Default to reset the customized order.

Deleting a Preset Station or Song

18 ACURA RDX NAVI-31TX48500.book 179

Audio Remote Controls

A

u d

io

1 Audio Remote Controls

The CD mode appears only when a CD is loaded.

The USB mode, iPod mode, Bluetooth Audio mode, Pandora* mode, and AhaTM mode appear when a connection (Bluetooth or USB) is established with a device.

To select audio mode, press the MODE button.

*: Pandora is available on U.S. models only.

Steering Wheel Controls Control basic audio system functions using the controls mounted on the steering wheel.

Cycles through the audio modes as follows:

Press to increase the volume. Press to decrease the volume. Press and hold to increase the volume rapidly.

MODE Button

VOL Button

MODE Button

CH Button

VOL Button

179Continued

uuAudio Remote ControlsuSteering Wheel Controls

180

A u

d io

1 CH Button

*: Pandora is available on U.S. models only.

18 ACURA RDX NAVI-31TX48500.book 180

FM/AM, SiriusXM

Press to select the next preset radio station. Press to select the previous preset radio station. Press and hold to scan to the next strong station. Press and hold to scan to the previous strong station.

CD, HDD, iPod, USB flash drive, or Bluetooth Audio Press to skip to the next song. Press to go back to the beginning of the current or previous song. Press and hold to go to the group up. (Bluetooth Audio only) Press and hold to go to the group down. (Bluetooth Audio only)

CD (MP3/WMA/AAC), HDD or USB flash drive Press and hold to skip to the next folder. Press and hold to go back to the previous folder.

Pandora* or AhaTM

Press to skip to the next song. Press to go back the previous song. (AhaTM only) Press and hold to select the next station. Press and hold to select the previous station.

CH Button

18 ACURA RDX NAVI-31TX48500.book 181

Audio Settings

A

u d

io

1 Audio Settings

*: This function is available on U.S. models only.

The Play Song from Beginning function is based on TuneStartTM technology of SiriusXM.

TuneStartTM is a registered trademark of SiriusXM Radio, Inc.

H SETTINGS button u Audio Settings

1. Move or to select an audio mode you want to set.

2. Rotate to select an item. Press .

The following items are available:

SXM tab SportsFlash (SiriusXM mode):

Notification: Sets whether a notification comes on the screen when the system receives a sports alert. If you select Enable (one time), the system enables the notification until turning the vehicle off. Beep: Turns on or off the beep that sounds every time the pop-up message interrupts other audio mode screen. Favorite Teams: Stores up to five favorite teams. Select Change Priority to change the priority of favorite teams. Certain sports may require additional station subscriptions.

Play Song from Beginning (SiriusXM mode): Turns on or off the Tune Start function that begins playing the current song from the beginning when you tune to a music channel.

181Continued

uuAudio Settingsu

182

A u

d io

1 Audio Settings

*: This function is available on U.S. models only.

18 ACURA RDX NAVI-31TX48500.book 182

CD/HDD tab Recording from CD (CD mode): Selects whether the songs on music CDs are

automatically recorded to the HDD. Recording Quality (CD mode): Selects the quality of the music files recorded to

the HDD. HDD Info (HDD mode): Displays the HDD capacity. Update Gracenote Album Info (CD or HDD mode): Updates the Gracenote

Album Info (Gracenote Media Database) from CD or from USB. 2 Updating Gracenote Album Info P. 222

Delete All HDD Data (HDD mode): Resets all the menu and customized settings, and delete all music data on the HDD.

Bluetooth tab Bluetooth Device List (Bluetooth Audio mode): Edits or deletes Bluetooth

Audio device paired. Connect Bluetooth Audio Device (Bluetooth Audio, Pandora* or AhaTM

mode): Connects, disconnects or pairs a Bluetooth Audio device to HFL.

Other tab Source Select Popup: Selects whether the list of selectable audio sources comes

on when the AUDIO button is pressed. HD Radio Mode* (AM/FM mode): Selects whether the audio system

automatically switches to the digital radio waves or receives the analogue waves only.

Cover Art (CD (MP3/WMA/AAC), iPod, USB, Pandora* or AhaTM mode): Turns on and off the cover art display.

Default: Cancels/Resets all customized items in the Audio Settings group as default.

uuAudio SettingsuAdjusting the Sound A

u d

io

1 Adjusting the Sound

The SVC has four modes: Off, Low, Mid, and High.

SVC adjusts the volume level based on the vehicle speed. As you go faster, audio volume increases. As you slow down, audio volume decreases.

DTS Neural Surround is a trademark of DTS, Inc.

When available, DTS Neural Surround converts stereo sound into surround sound.

Select Off, Low, Mid or High for the SVC setting.

You can also adjust the sound to select on the On Demand Multi-Use DisplayTM.

On Demand Multi-Use DisplayTM

18 ACURA RDX NAVI-31TX48500.book 183

Adjusting the Sound H MENU button u Sound

Adjust the sound bass, treble, fader, and balance. You can also adjust the strength of the sound coming from the center and subwoofer speakers. In addition, you can set Speed-sensitive Volume Compensation (SVC) and DTS Neural Surround.

1. Rotate to select the sound mode to adjust. Press .

2. Rotate to adjust the desired level. Press .

1. Select More. 2. Select Sound. 3. Use , or other icon to adjust

the setting. u Use the / icons to turn

the page. u Select to go back to the

previous screen.

Interface Dial

On Demand Multi-Use DisplayTM

183

184

A u

d io

18 ACURA RDX NAVI-31TX48500.book 184

Playing FM/AM Radio

1 Selecting FM/AM Mode

You can control the AM/FM radio using voice commands.

2 Radio FM Commands P. 349

The ST indicator appears on the display indicating stereo FM broadcasts.

Stereo reproduction in AM is not available.

The radio can receive the complete AM and FM bands: AM band: 530 to 1710 kHz FM band: 87.7 to 107.9 MHz

You can store 6 AM stations and 12 FM stations into the preset memory.

Selecting FM/AM Mode

1. Press the MENU button. (in AUDIO mode) 2. Rotate to select Change Source. Press . 3. Rotate to select the frequency band (FM, AM). Press .

u The band and frequency are displayed on the navigation screen.

1. Select Audio Source. 2. Select the frequency band (FM, AM) icon.

u The band and frequency are displayed on the On Demand Multi-Use DisplayTM.

Interface Dial

On Demand Multi-Use DisplayTM

uuPlaying FM/AM RadiouAudio Screen Control A

u d

io

18 ACURA RDX NAVI-31TX48500.book 185

Audio Screen Control Control the audio system through the navigation screen and On Demand Multi-Use DisplayTM.

Rotate to select a station from the list. Press . u Rotate and select Refresh to

update the station list at any time. u Press the MENU button to display

the menu items. 2 Audio Menu P. 188

Interface Dial

Frequency band

185Continued

uuPlaying FM/AM RadiouAudio Screen Control

186

A u

d io

1 Audio Screen Control

Select TAG to tag the song if it is played on an HD RadioTM station. The iPod/iPhone should be connected to the audio system to store the tagged song information on your device.

U.S. models

18 ACURA RDX NAVI-31TX48500.book 186

The following items are available: : Tune the radio frequency. On the preset screen, select and hold to search

up and down the selected band for a station with a strong signal. : Search up and down the selected band for a station with a strong

signal. Station Number: Select and hold a desired number where you want to store the

station. Select to listen a preset station. More: Display the menu items.

2 Audio Menu P. 188

Scan: Scans for stations with a strong signal in the current band and plays a 10- second sample. Select Stop Scan to stop scanning and play the current selection.

On Demand Multi-Use DisplayTM

Preset screen

Select Tune.

Select Presets.

Tune screen

Station Number

uuPlaying FM/AM RadiouAudio Screen Control A

u d

io

18 ACURA RDX NAVI-31TX48500.book 187

To store a station: 1. Tune to the desired station. 2. Move to select Presets. 3. Rotate to select a desired number on the preset station list. 4. Press and hold a few seconds to store the current station. To listen to a stored station, rotate to select the preset number. Press .

To store a station: 1. Tune to the selected station on preset screen. 2. Select and hold a desired number. To listen to a stored station, select the preset number.

Preset Memory Interface Dial

On Demand Multi-Use DisplayTM

187

188

uuPlaying FM/AM RadiouAudio Menu

A u

d io

18 ACURA RDX NAVI-31TX48500.book 188

Audio Menu H MENU button (in FM/AM mode)

Rotate to select an item. Press .

The following items are available: Sound: Adjusts the settings of the audio speakers sound.

2 Adjusting the Sound P. 183

Refresh Station List: Displays the stored station list. Radio Text: Displays the text information broadcast by the current RDS station. Save Preset: Stores the station into the preset memory. Change Source: Changes the audio source mode. Scan: Scans for stations with a strong signal in the current band and plays a 10-

second sample. Select Stop Scan to stop scanning and play the current selection. Tag Song*: You can store the TAG information if your a iPhone/iPod is connected

to the USB port. If the iPod/iPhone is not connected to the audio system, the information is stored in the audio unit temporarily, then once the device is connected to the system, data is transferred to the iPod/iPhone.

Tagged Song List*: Displays the TAG information saved to the audio system when an HD RadioTM station is selected.

Tune/Seek: Tunes the radio to the frequency you select. Rotate to select a frequency, then press .

Interface Dial

uuPlaying FM/AM RadiouAudio Menu A

u d

io

1 Audio Menu

iTunes Tagging*

iTunes in iTunes Tagging is a trademark of Apple Inc.

When an HD RadioTM station is selected, the HD indicator appears on the Navigation screen and On Demand Multi-Use DisplayTM.

If you want to have the current song information saved for future reference, select TAG in On Demand Multi-Use DisplayTM or select Tag Song in the menu with Interface dial.

If iPod/iPhone is connected, the tag is transferred to the connected device immediately, otherwise the tag will be transferred when the device is connected.

*: This function is available on U.S. models only.

HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD RadioTM and the HD, HD Radio and Arc logos are proprietary trademarks of iBiquity digital Corp.

U.S. models

18 ACURA RDX NAVI-31TX48500.book 189

HD Subchannel*: Displays the subchannel list when an HD RadioTM station is selected.

1. Select More. 2. Select a setting item.

The following items are available: Sound: Displays the sound preferences screen.

2 Adjusting the Sound P. 183

Save Preset: Stores the station into the preset memory. Screen Settings: Adjusts the screens preferences.

2 Changing the Screen Settings P. 87

Scan: Scans for stations with a strong signal in the current band and plays a 10- second sample. Select Stop Scan to stop scanning and play the current selection.

HD Subchannel*: Displays the subchannel list when an HD RadioTM station is selected.

On Demand Multi-Use DisplayTM

189

190

A u

d io

18 ACURA RDX NAVI-31TX48500.book 190

Playing SiriusXM Radio

1 Playing SiriusXM Radio

You can control the SiriusXM radio using voice commands.

2 Radio SXM Commands P. 349

In the channel mode, all available channels are selectable. In the category mode, you can select a channel within a category (Jazz, Rock, Classical, etc.).

There may be instances when SiriusXM Radio does not broadcast all the data fields (artist name, title). This does not indicate a problem with your audio system.

SiriusXM Radio channels load in ascending order, which can take about a minute. Once they have loaded, you can scroll up or down to make your selections.

Selecting SiriusXM Mode

1. Press the MENU button. (in AUDIO mode) 2. Rotate to select Change Source. Press . 3. Rotate to select SXM. Press .

u The category, channel list, and presets are displayed on the navigation screen.

1. Select Audio Source. 2. Select the SiriusXM icon.

u The category and channel are displayed on the On Demand Multi-Use displayTM.

Interface Dial

On Demand Multi-Use DisplayTM

uuPlaying SiriusXM RadiouAudio Screen Control A

u d

io

18 ACURA RDX NAVI-31TX48500.book 191

Audio Screen Control Control the audio system through the navigation screen and On Demand Multi-Use DisplayTM.

1. Rotate to select a category. Press . u Move if you want to select

from the current channel list or presets.

2. Rotate to select a channel. Press . u Press the MENU button to

display the menu items. 2 Audio Menu P. 200

Interface Dial

191Continued

uuPlaying SiriusXM RadiouAudio Screen Control

192

A u

d io

1 Audio Screen Control

Select TAG to tag the song if it is played on an SiriusXM Radio channel. To store the tagged song information to an iPod or iPhone, the device must be connected to the audio system.

U.S. models

18 ACURA RDX NAVI-31TX48500.book 192

The following items are available: Category bar (Tune screen): Select or to search a category. Channel bar (Tune screen): Select or to search a channel. Select and hold

or to search up or down 10 channels. (Tune screen): Select to skip to the next song. Select to skip to

the previous song. Select and hold to fast-forward the current selection. Select and hold to fast-rewind the current selection.

(Preset screen): Select a preset channel. Select and hold to search a channel.

: Select to play or pause the current selection. Select and hold to return to a live broadcast on the current channel.

More: Display the menu items. 2 Audio Menu P. 200

Scan: Scans for channels in the selected mode or Presets and plays a 10-second sample. Select Stop Scan to stop scanning and play the current selection.

On Demand Multi-Use DisplayTM

Select Tune.

Preset screen Tune screen

Select Presets.

Preset Number

uuPlaying SiriusXM RadiouAudio Screen Control A

u d

io

1 Preset Memory

You can store 12 SiriusXM channels into the preset memory.

1 Multi-channel preset (for music channels only)

Not all SiriusXM channels are available to add to multi-channel preset.

18 ACURA RDX NAVI-31TX48500.book 193

To store a channel: 1. Tune to the desired channel. 2. Move to select Presets. 3. Rotate to select a desired number. 4. Press and hold a few seconds to store the current channel. To listen to a stored channel, rotate to select the preset number. Press .

To store a channel: 1. Tune to the desired channel. 2. Select and hold a desired number. To listen to a stored channel, select the preset number.

Multi-channel preset (for music channels only)

You can store up to four of your preferred music channels per preset. When multiple channels exist, the music randomly skips between channels. 1. Select a channel you want to store. 2. Select More. 3. Select Save Preset.

u You can add the current channel to multi-channel mixed preset if the Mixed Preset icon is highlighted.

4. Select a highlighted preset number where you want to add a music channel. u A message appears if there are no available presets.

5. Select Add from the Add/Replace screen.

Preset Memory Interface Dial

On Demand Multi-Use DisplayTM

On Demand Multi-Use DisplayTM

Continued 193

uuPlaying SiriusXM RadiouAudio Screen Control

194

A u

d io

1 Replay Function

The system starts storing broadcast in memory when the vehicle is turned on. You can go back to the program from that point. You can no longer replay any program once the vehicle is turned off or if the non-preset channel has been changed. The audio/information screen displays how long the station has been recording in the replay status bar.

18 ACURA RDX NAVI-31TX48500.book 194

H MENU button (in SiriusXM mode) u Playback

The system can record up to the last 60 minutes broadcast of your currently tuned channel as well as the last 30 minutes broadcast of preset channels, starting from the moment you turn the vehicle on. If you tuned to preset channel, the system records up to 60 minutes of a broadcast instead of up to 30 minutes. You can rewind and replay the last 30 or 60 minutes of a broadcast.

Select OK and rotate to select a channel. Press . To play or pause in playback mode:

1. Press the MENU button. 2. Rotate to select Play/Pause, press .

Select the icon.

Returning to real-time broadcast

1. Press the MENU button. 2. Rotate to select Go to Live, then press .

Select and hold the icon or select More then, select Go to Live.

Replay Function

Interface Dial

On Demand Multi-Use DisplayTM

Interface Dial

On Demand Multi-Use DisplayTM

uuPlaying SiriusXM RadiouAudio Screen Control A

u d

io

18 ACURA RDX NAVI-31TX48500.book 195

Replay status display

Display the replay status on the navigation screen when you listen to the playback. Interface Dial

Shows how much time the replayed segment is behind the real-time broadcast

Stored length in the memory

Replayed segment

195Continued

uuPlaying SiriusXM RadiouAudio Screen Control

196

A u

d io

1 SportsFlashTM Alert

The notification message does not appears on the navigation screen under the following circumstances: When you select other than the SiriusXM Mode. When the start-up screen and Multi-view Rear

Camera screen are displayed.

When a sports alert is received, the SportsFlashTM Listen indicator appears on the navigation screen.

You can change the SportsFlashTM setting. 2 Audio Settings P. 181

SportsFlashTM is a registered trademark of SiriusXM Radio, Inc.

18 ACURA RDX NAVI-31TX48500.book 196

While listening to other channels, you can receive sports alerts such as scores from up to five of your favorite teams. The notification message appears on the navigation screen and On Demand Multi-Use DisplayTM when receiving sports alerts.

1. A pop-up appears and notifies you of a sports alert.

2. Select Listen Now. u Press the BACK button to

return the previous screen. u If no operations are performed

for 10 seconds, the system returns to the previous audio mode automatically.

The following items are available: Check Later: Returns to the previous screen and stores the received sports alert

in the audio system. If other sports alerts are received in the same game, the notification message appears again.

Ignore this Game: Returns to the previous screen and stores the received sports alert in the audio system. If other sports alerts are received in the same game, the notification message does not appear.

SportsFlashTM Alert

Interface Dial

uuPlaying SiriusXM RadiouAudio Screen Control A

u d

io

18 ACURA RDX NAVI-31TX48500.book 197

3. Select an option.

The following options are available: BACK: Returns to the previous screen. Skip Up: Skips to the next stored sports alert. Skip Down: Skips to the previously stored sports alert. 15sec Back: Select to skip back 15 seconds to the current sports alert. Select and

hold to fast-rewind the current sports alert. 30sec Skip: Select to skip forward 30 seconds to the current sports alert. Select

and hold to fast-forward the current sports alert.

197Continued

198

uuPlaying SiriusXM RadiouAudio Screen Control

A u

d io

18 ACURA RDX NAVI-31TX48500.book 198

1. Select an item. u Select to return the

previous screen. u If no operations are performed

for 10 seconds, the system returns to the previous screen automatically.

The following items are available: Listen Now: Plays the received sports alert in the current game. Ignore this Game: Returns to the previous screen and stores the received sports

alert in the audio system. If other sports alerts are received in the same game, the notification message does not appear.

2. Select an option.

The following options are available: BACK: Returns to the previous screen. : Select to skip to the previous or next sports alert. Select and hold to fast-

rewind or fast-forward the current sports alert.

On Demand Multi-Use DisplayTM

uuPlaying SiriusXM RadiouAudio Screen Control A

u d

io

18 ACURA RDX NAVI-31TX48500.book 199

If you have missed a sports alert:

1. From the audio screen, press the MENU button. 2. Rotate to select SportsFlash, then press . 3. Rotate to select an alert, then press .

Interface Dial

199

200

uuPlaying SiriusXM RadiouAudio Menu

A u

d io

1 Audio Menu

iTunes Tagging*

iTunes in iTunes Tagging is a trademark of Apple Inc.

If you want to have the information on the song played from the SiriusXM Radio station, select TAG in On Demand Multi-Use DisplayTM or select Tag Song in the menu with Interface dial.

If iPod/iPhone is connected, the tag is transferred to the connected device immediately, otherwise the tag will be transferred when the device is connected.

* This function is available on U.S. models only.

The Scan Songs in Presets function is based on TuneScanTM technology of SiriusXM.

The Featured Channels function is based on Featured FavoritesTM technology of SiriusXM.

TuneScanTM and Featured FavoritesTM are registered trademarks of SiriusXM Radio, Inc.

To find out more about these features, visit www.siriusxm.com.

U.S. models

18 ACURA RDX NAVI-31TX48500.book 200

Audio Menu H MENU button (in SiriusXM mode)

Rotate to select an item. Press .

The following items are available: Sound: Adjusts the settings of the audio speakers sound.

2 Adjusting the Sound P. 183

Featured Channels: Display the list of suggested channels from SiriusXM. Up to three channel groups can be displayed.

Save Preset: Stores the current channel into the preset memory. SportsFlash: Displays the list of available sports alerts. Up to two sports alerts can

be displayed. Tune Mode: Sets the tune mode.

Channel Mode: Tune to select all available channels. Category Mode: Tune to select a channel within a category (Jazz, Rock, Classic, etc.).

Change Source: Changes the audio source mode.

Interface Dial

uuPlaying SiriusXM RadiouAudio Menu A

u d

io

1 Audio Menu

* This function is available on U.S. models only.

18 ACURA RDX NAVI-31TX48500.book 201

Scan: Select the scan type. Scans for channels and plays a 10-second sample. Select Stop Scan to stop scanning and play the current channel. Scan Channels: Scans for channels with a strong signal in the selected mode. Scan Songs in Presets: Scans for desired preset channel by songs. Select Skip Up or Skip Down to skip to the next/previous stored selection.

Tag Song*: You can store the TAG information in the connected iPod/iPhone. If the iPod/iPhone is not connected to the audio system via USB, the information is stored in the audio unit temporarily. Once the device is connected to the system, data is transferred to the iPod/iPhone.

Tagged Song List*: Displays the TAG information saved to the audio device. Playback: Play back selected presets from the beginning up to 30 minutes.

Skip Up: Skips to the next stored song. Skip Down: Skips to the previous stored song. 15sec Back: Select to skip back 15 seconds in the current selection. Select and hold to fast-rewind the current selection. 30sec Skip: Select to skip forward 30 seconds in the current selection. Select and hold to fast-forward the current selection.

Play/Pause: Plays and pauses the current channel. Go to Live: If previously paused, skips ahead to the live broadcast on the current

channel.

Continued 201

202

uuPlaying SiriusXM RadiouAudio Menu

A u

d io

18 ACURA RDX NAVI-31TX48500.book 202

1. Select More. 2. Select a setting item.

The following items are available: Sound: Displays the sound preferences screen.

2 Adjusting the Sound P. 183

Save Preset: Stores the channel into the preset memory. Set to store up to five of your preferred music channels per preset if the Preset icon is highlighted.

2 Multi-channel preset (for music channels only) P. 193

Go to Live: If previously paused, skips ahead to the live broadcast on the current channel.

Scan: Select the scan type. Scans for channels and plays a 10-second sample. Select Stop Scan to stop scanning and play the current channel. Scan Channels: Scans for channels with a strong signal in the selected mode. Scan Songs in Presets: Scans for desired preset channel by songs. Select or

to skips to the next/previous stored selection. Tune Mode: Sets the tune mode.

Channel: Tune to select all available channels. Category: Tune to select a channel within a category (Jazz, Rock, Classic, etc.).

Screen Settings: Adjusts the screens preferences. 2 Changing the Screen Settings P. 87

On Demand Multi-Use DisplayTM

uuPlaying SiriusXM RadiouSiriusXM Radio Service A

u d

io

1 Subscribing to SiriusXM Radio

Contact Information for SiriusXM Radio: U.S.: SiriusXM Radio at www.siriusxm.com or 1-866-635-2349 Canada: SiriusXM Canada at www.xmradio.ca, or (877) 209-0079

1 Receiving SiriusXM Radio

The SiriusXM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equator.

You may experience reception problems under the following circumstances: In a location with an obstruction to the south of

your vehicle In tunnels On the lower level of a multi-tiered road Large items carried on the roof rack

18 ACURA RDX NAVI-31TX48500.book 203

SiriusXM Radio Service

1. You need your radio ID ready before registering for subscription. To see the ID in the display: Operate the On Demand Multi-Use DisplayTM until channel 0 appears.

2. Have your radio ID and credit card number ready, and either call or visit the SiriusXM website to subscribe.

Switch to the SiriusXM mode by pressing the MODE button repeatedly or operating the On Demand Multi-Use DisplayTM, and stay in this mode for about 30 minutes until the service is activated. Make sure your vehicle is in an open area with good reception.

Subscribing to SiriusXM Radio

Receiving SiriusXM Radio

203Continued

204

uuPlaying SiriusXM RadiouSiriusXM Radio Service

A u

d io

18 ACURA RDX NAVI-31TX48500.book 204

Loading: SiriusXM is loading the audio or program information. Channel off air: The channel is not currently broadcasting. Channel unauthorized: SiriusXM radio is receiving information update from the network. No signal: The signal is too weak in the current location. Channel unavailable: No such channel exists, the channel is not part of your subscription, or the artist or title information is unavailable. Check antenna: There is a problem with the SiriusXM antenna. Contact a dealer.

SiriusXM Radio Display Messages

18 ACURA RDX NAVI-31TX48500.book 205

Playing a Disc

A

u d

io

1 Playing a Disc

NOTICE Do not use CDs with adhesive labels. The label can cause the CD to jam in the unit.

WMA and ACC files protected by digital rights management (DRM) cannot be played. The audio system displays Unplayable File, then skips to the next file.

Text data appears on the display under the following circumstances: When you select a new folder, file, or track. When you change the audio mode to CD. When you insert a CD.

If you eject the CD but do not remove it from the slot, the system reloads the CD automatically after several seconds.

You can control a CD audio using voice commands. 2 Disc Commands P. 349

Your audio system supports audio CDs, CD-Rs and CD-RWs in either MP3, WMA, or AAC format. With the CD loaded, select the CD mode.

Selecting Disc Mode

1. Insert a disc into the disc slot. u The disc automatically being playing.

2. Press the MENU button. (in AUDIO mode) 3. Rotate to select Change Source. Press . 4. Rotate to select CD. Press .

1. Insert a disc into the disc slot. u The disc automatically being playing.

2. Select Audio Source. 3. Select the CD icon.

Interface Dial

On Demand Multi-Use DisplayTM

205

206

uuPlaying a DiscuAudio Screen Control

A u

d io

1 Audio Screen Control

Random: Plays all tracks/files in random order. Repeat: Repeats the current track/file. Scan: Provides 10-second sampling of all tracks on

the CD (all files in the current folder in MP3, WMA, or AAC). Select Stop Scan to stop scanning and play the current selection.

On Demand Multi-Use DisplayTM

18 ACURA RDX NAVI-31TX48500.book 206

Audio Screen Control Control the audio system through the navigation screen and On Demand Multi-Use DisplayTM.

1. Rotate or press to display the song list.

2. Rotate , move or to select a file from the list (files in MP3, WMA, or AAC). Press . u Press the MENU button to

display the menu items. 2 Audio Menu P. 207

1. Select to skip to the next folder, and to skip to the beginning of the previous folder in MP3, WMA, or AAC.

2. Select or to change tracks (files in MP3, WMA, or AAC). Select and hold to move rapidly within a track/file. u Select More to display the

menu item. 2 Audio Menu P. 207

Track list

Interface Dial

On Demand Multi-Use DisplayTM

uuPlaying a DiscuAudio Menu A

u d

io

18 ACURA RDX NAVI-31TX48500.book 207

Audio Menu H MENU button (in CD mode)

Rotate to select an item. Press .

The following items are available, depending on the type of disc: Sound: Adjusts the settings of the audio speakers sound.

2 Adjusting the Sound P. 183

Music Search: Selects a file from the Music Search list. 2 How to Select a File from the Music Search List (MP3/WMA/AAC) P. 209

Change Source: Changes the audio source mode. Scan:

Scan Folders (MP3/WMA/AAC): Provides 10-second sampling of the first file in each of the main folders. Scan Tracks: Provides 10-second sampling of all tracks on the CD (all files in the current folder in MP3, WMA, or AAC).

Random/Repeat: Repeat Folder (MP3/WMA/AAC): Repeats all files in the current folder. Repeat Track: Repeats the current track/file. Random in Folder (MP3/WMA/AAC): Plays all files in the current folder in random order. Random All Tracks: Plays all tracks/files in random order.

Interface Dial

207Continued

208

uuPlaying a DiscuAudio Menu

A u

d io

18 ACURA RDX NAVI-31TX48500.book 208

Rec to HDD: Records a music CD onto the HDD for playback using HDD Audio. 2 Recording a Music CD to HDD P. 213

1. Select More. 2. Select a setting item.

The following items are available, depending on the type of disc: Sound: Displays the sound preferences screen.

2 Adjusting the Sound P. 183

Screen Settings: Displays the screen preferences screen. 2 Changing the Screen Settings P. 87

On Demand Multi-Use DisplayTM

uuPlaying a DiscuAudio Menu A

u d

io

18 ACURA RDX NAVI-31TX48500.book 209

H MENU button (in CD mode) u Music Search

Rotate , move or to select a file from the Music Search list. Press .

How to Select a File from the Music Search List (MP3/WMA/ AAC)

209

210

uuPlaying a DiscuRecommended CDs

A u

d io

1 Recommended CDs

A Dual-disc cannot play on this audio unit. If recorded under certain conditions, a CD-R or CD-RW may not play either.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Neural Surround is a trademark of DTS, Inc. DTS, Inc. All Rights Reserved.

18 ACURA RDX NAVI-31TX48500.book 210

Recommended CDs Use only high-quality CD-R or CD-RW discs labeled for audio use. Use only CD-R or CD-RW discs on which the recordings are closed. Play only standard round-shaped CDs.

Some software files may not allow for audio play or text data display. Some versions of MP3, WMA or AAC formats may be unsupported.

CDs with MP3, WMA or AAC Files

The CD packages or jackets should have one of these marks.

Also includes:

uuPlaying a DiscuRecommended CDs A

u d

io

1 Protecting CDs

NOTICE Do not insert a damaged CD. It may be stuck inside and damage the audio unit.

Examples:

With Label/ Sticker

Using Printer Label Kit

Sealed With Plastic Ring

Bubbled/ Wrinkled

Warped Burrs

3 in (80 mm) CD

Chipped/ Cracked

Small CDs

Poor quality CDs

Damaged CDs

Bubbled, wrinkled, labeled, and excessively thick CDs

18 ACURA RDX NAVI-31TX48500.book 211

Protecting CDs Follow these precautions when handling or storing CDs: Store a CD in its case when it is not being played. When wiping a CD, use a soft clean cloth from the center to the outside edge. Handle a CD by its edge. Never touch either surface. Never insert foreign objects into the CD player. Keep CDs out of direct sunlight and extreme heat. Do not place stabilizer rings or labels on the CD. Avoid fingerprints, liquids, and felt-tip pens on the CD.

211

212

A u

d io

18 ACURA RDX NAVI-31TX48500.book 212

Playing Hard Disc Drive (HDD) Audio

1 Playing Hard Disc Drive (HDD) Audio

You can control the HDD audio using voice commands.

2 HDD Commands P. 349 2 Song By VoiceTM (SBV) P. 231

Music tracks recorded on HDD cannot be recorded onto CDs or other devices.

Tracks are recorded at four times the playback speed using ultra-efficient compression technology; therefore, sound quality may vary slightly from the original.

If the HDD is ever replaced, all music data is lost and cannot be recovered.

If there is a problem, you may see an error message on the display.

2 Hard Disc Drive (HDD) Audio P. 325

The Hard Disc Drive (HDD) Audio function plays tracks from music CDs that have been recorded onto the built-in HDD. You can arrange the tracks in playlists or play the tracks using various search methods.

Selecting HDD Mode

1. Press the MENU button. (in AUDIO mode) 2. Rotate to select Change Source. Press . 3. Rotate to select HDD. Press to play tracks stored on the HDD.

u Title information is displayed if found in the Gracenote Album Info (Gracenote Media Database) stored on the HDD.

u The HDD has two types of playlists: original playlists and user playlists. An original playlist is automatically created for each album when a music CD is recorded. You can customize up to six user playlists provided on the HDD by adding tracks from your original playlists.

1. Select Audio Source. 2. Select the HDD icon to play tracks stored on the HDD.

Interface Dial

On Demand Multi-Use DisplayTM

uuPlaying Hard Disc Drive (HDD) AudiouRecording a Music CD to HDD A

u d

io

1 Recording a Music CD to HDD

You can add tracks to user playlists, where you can mix and match tracks from other CDs recorded on the HDD.

2 Editing an Album or Playlist P. 218 2 Editing Track Information P. 220

If you stop the engine or the power system is turned off while recording a CD, there may be pauses between songs when you play back from the HDD.

Repeat, random, and scan functions are not available during recording.

You can play music from other sources (e.g., SiriusXM, HDD, etc.) while recording.

Please note that there is no compensation offered in the case of unsuccessful recording of audio data or the loss of audio data due to any cause whatsoever.

Clearing the HDD Any music tracks stored on the HDD can be deleted.

18 ACURA RDX NAVI-31TX48500.book 213

Recording a Music CD to HDD The songs on music CDs are automatically recorded by factory default to the HDD the first time you play each disc. You can then play the songs directly from the HDD.

1. Press the MENU button. (in CD mode) 2. Rotate to select Cancel Record to HDD. Press .

1. Press the MENU button. (in CD mode) 2. Rotate to select Rec to HDD. Press .

Stopping Recording

Recording a CD Manually

Recording indicator

Recording

Ready to record

213

214

uuPlaying Hard Disc Drive (HDD) AudiouAudio Screen Control

A u

d io

1 Audio Screen Control

Repeat: Repeat Artist: Repeats all tracks in the current artist. Repeat Album: Repeats all tracks in the current album. Repeat Track: Repeats the current track.

Random: Random in Artist: Plays all tracks in the current artist in random order. Random in Album: Plays all tracks in the current album in random order. Random All Tracks: Plays all tracks in random order.

Scan: Albums: Provides 10-second sampling of the first track in each album. Tracks: Provides 10-second sampling of all tracks on HDD.

On Demand Multi-Use DisplayTM

18 ACURA RDX NAVI-31TX48500.book 214

Audio Screen Control Control the audio system through the navigation screen and On Demand Multi-Use DisplayTM.

1. Rotate or press to display the song list.

2. Rotate , move or to select a track from the list. Press

. u Press the MENU button to

display the menu items. 2 Audio Menu P. 215

1. Select skip to the next playlist/ album, and to skip to the beginning of the previous playlist/ album.

2. Select or to change tracks. Select and hold to move rapidly within a track. u Select More to display the

menu item. 2 Audio Menu P. 215

Interface Dial

On Demand Multi-Use DisplayTM

uuPlaying Hard Disc Drive (HDD) AudiouAudio Menu A

u d

io

18 ACURA RDX NAVI-31TX48500.book 215

Audio Menu H MENU button (in HDD mode)

Rotate to select an item. Press .

The following items are available: Sound: Adjusts the settings of the audio speakers sound.

2 Adjusting the Sound P. 183

Music Search: Selects a file from the Music Search list. 2 How to Select a Track from the Music Search List P. 217

Change Source: Changes the audio source mode. Scan:

Scan Albums: Provides 10-second sampling of the first track in each album. Scan Tracks: Provides 10-second sampling of all tracks on HDD.

Random/Repeat: The following menu items vary depending on the category you selected by the Music Search list. Repeat Artist: Repeats all tracks in the current artist. Repeat Album: Repeats all tracks in the current album. Repeat Track: Repeats the current track. Random in Artist: Plays all tracks in the current artist in random order. Random in Album: Plays all tracks in the current album in random order. Random All Tracks: Plays all tracks in random order.

Interface Dial

215Continued

216

uuPlaying Hard Disc Drive (HDD) AudiouAudio Menu

A u

d io

18 ACURA RDX NAVI-31TX48500.book 216

Edit/Delete: Change the playlist name, album name, genre, and track order of the current playlist. You can also delete tracks, playlists, and albums.

1. Select More. 2. Select a setting item.

The following items are available: Sound: Displays the sound preferences screen.

2 Adjusting the Sound P. 183

Screen Settings: Displays the screen preferences screen. 2 Changing the Screen Settings P. 87

On Demand Multi-Use DisplayTM

uuPlaying Hard Disc Drive (HDD) AudiouAudio Menu A

u d

io

18 ACURA RDX NAVI-31TX48500.book 217

H MENU button (in HDD mode) u Music Search

1. Move or to select a search category. Press .

2. Rotate to select a track from the Music Search list. Press .

How to Select a Track from the Music Search List

217Continued

uuPlaying Hard Disc Drive (HDD) AudiouAudio Menu

218

A u

d io

1 Editing an Album or Playlist

The maximum number of original playlists is 50 with a maximum of 99 songs in each playlist.

Each album CD counts as an original playlist. Adding a track from a user playlist into the same user playlist will cause the track to appear twice in the playlist.

Deleting an album (original playlist) also deletes the album tracks you have stored in any user playlists.

Deleting a user playlist or deleting all tracks from a user playlist does not remove the playlist folder. The folder retains the playlist name and artist information.

18 ACURA RDX NAVI-31TX48500.book 218

H MENU button (in HDD mode) u Edit/Delete

1. Rotate to select Albums or Playlist. Press .

2. Rotate to select an album or playlist that you want edit or delete. Press . u The pop-up menu appears on

the screen. 3. Rotate to select an item. Press

.

The following items are available: Edit Name: Enter a new name using the interface dial or the On Demand Multi-

Use DisplayTM. Delete: Deletes the selected album or playlist. List Tracks: Change the track title, artist name, genre and composer. You can

also delete tracks.

Editing an Album or Playlist

uuPlaying Hard Disc Drive (HDD) AudiouAudio Menu A

u d

io

18 ACURA RDX NAVI-31TX48500.book 219

H MENU button (in HDD mode) u Edit/Delete u Playlists u Create New Playlist

1. Enter the playlist name using the interface dial or the On Demand Multi-Use DisplayTM.

2. Select tracks from the music search list.

Creating a New Playlist

219Continued

220

uuPlaying Hard Disc Drive (HDD) AudiouAudio Menu

A u

d io

18 ACURA RDX NAVI-31TX48500.book 220

H MENU button (in HDD mode) u Edit/Delete u Tracks

Change the track title, artist name, genre and composer. You can also delete tracks. Rotate select a track you want to edit or delete. Press . u The pop-up menu appears on the

screen.

The following items are available: Edit Name: Enter the track information (track name, track artist, etc.) using the

interface dial or the On Demand Multi-Use DisplayTM. Delete: Deletes a track.

Editing Track Information

uuPlaying Hard Disc Drive (HDD) AudiouAudio Menu A

u d

io

18 ACURA RDX NAVI-31TX48500.book 221

H MENU button (in HDD mode) u Edit/Delete

Music information (album name, artist name, genre) can be acquired by accessing the Gracenote Album Info.

1. Rotate to select Albums. Press .

2. Rotate to select an album that you want edit or delete. Press . u The pop-up menu appears on

the screen. 3. Rotate to select Edit Name.

Press .

4. Move to select Get Music Info. Press . u The system starts to access the

Gracenote Album Info.

Displaying Music Information

221Continued

uuPlaying Hard Disc Drive (HDD) AudiouAudio Menu

222

A u

d io

1 Updating Gracenote Album Info

To acquire updated files: Consult a dealer. Visit http://www.navteq.com/gracenote/acura.

Once you perform an update, any information you edited before will be overwritten or erased.

18 ACURA RDX NAVI-31TX48500.book 222

H SETTINGS button (in HDD mode) u Audio Settings u CD/HDD

Update the Gracenote Album Info (Gracenote Media Database) that is included with the navigation system.

1. Insert the update disc into the disc slot or connect the USB flash drive that includes the update.

2. Rotate to select Update Gracenote Album Info. Press

.

3. Rotate to select Update by CD or Update by USB. Press . u The system starts updating and

the confirmation message appears on the screen. Press to finish.

Updating Gracenote Album Info

uuPlaying Hard Disc Drive (HDD) AudiouAudio Menu A

u d

io

18 ACURA RDX NAVI-31TX48500.book 223

H SETTINGS button u Audio Settings u CD/HDD u Delete All HDD Data

Delete all music data on the HDD. Rotate to select Yes. Press .

Deleting All HDD Data

223

224

A u

d io

18 ACURA RDX NAVI-31TX48500.book 224

Playing an iPod

1 Connecting an iPod

Do not connect your iPod using a hub. Do not use a device such as a card reader or hard

disc drive, as the device or your tracks may be damaged.

We recommend backing up your data before using the device in your vehicle.

Displayed messages may vary depending on the device model and software version.

Your audio system may not work with all software versions of these devices.

If the audio system does not recognize your iPod, try reconnecting it a few times or reboot the device.

State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.

1. Open the USB cover. 2. Install the iPod dock connector to

the USB connector.

Connecting an iPod

Model Compatibility

Model

iPod (5th generation)

iPod classic 80GB/160GB (launch in 2007)

iPod classic 120GB (launch in 2008)

iPod classic 160GB (launch in 2009)

iPod nano (1st to 7th generation) launch in 2012

iPod touch (1st to 5th generation) launch in 2012

iPhone 3G/iPhone 3GS/iPhone 4/iPhone 4s/iPhone 5/iPhone 5s/iPhone 5c

uuPlaying an iPoduSelecting iPod Mode A

u d

io

1 Selecting iPod Mode

You can control an iPod using voice commands. 2 iPod Commands P. 349 2 Song By VoiceTM (SBV) P. 231

Available operating functions vary on models or versions. Some functions may not be available on the vehicles audio system.

If there is a problem, you may see an error message on the navigation screen.

2 iPod/USB Flash Drive P. 326

18 ACURA RDX NAVI-31TX48500.book 225

Selecting iPod Mode

1. Connect the iPod to the USB adapter cable in the console compartment. 2. Press the MENU button. (in AUDIO mode) 3. Rotate , select Change Source. Press . 4. Rotate , select iPod. Press .

1. Connect the iPod to the USB adapter cable in the console compartment. 2. Select Audio Source. 3. Select the iPod icon.

Interface Dial

On Demand Multi-Use DisplayTM

225

226

uuPlaying an iPoduAudio Screen Control

A u

d io

1 Audio Screen Control

Some functions may not be available depending on your phone's model or software version.

Select BACK to go back to the previous screen.

18 ACURA RDX NAVI-31TX48500.book 226

Audio Screen Control Control the audio system through the navigation screen and On Demand Multi-Use DisplayTM.

1. Rotate or press to display the song list.

2. Rotate or move or to select a song from the list. Press

. u Press the MENU button to

display the menu items. 2 Audio Menu P. 228

Track list

Interface Dial

uuPlaying an iPoduAudio Screen Control A

u d

io

18 ACURA RDX NAVI-31TX48500.book 227

The following items are available: (play/pause): Plays or pauses a song file. : Select the previous or next track. Select and hold to move rapidly within

a track. Album bar: Select to display the album search screen.

Select or to search for an album. Repeat: Repeats the current track. Shuffle:

Shuffle Albums: Plays all available albums in a selected list (playlists, artists, albums, songs, genres, or composers) in random order. Shuffle All Songs: Plays all available files in a selected list (playlists, artists, albums, songs, genres, or composers) in random order.

More: Select to display the menu item. 2 Audio Menu P. 228

On Demand Multi-Use DisplayTM

Album Bar Select an album image.

Select the album bar.

Album Image

227

228

uuPlaying an iPoduAudio Menu

A u

d io

18 ACURA RDX NAVI-31TX48500.book 228

Audio Menu H MENU button (in iPod mode)

Rotate to select an item. Press .

The following items are available: Sound: Adjusts the settings of the audio speakers sound.

2 Adjusting the Sound P. 183

Music Search: Selects a song from the Music Search list. 2 How to Select a Song from the Music Search List P. 230

Change Source: Changes the audio source mode. Play/Pause: Pauses or plays a song file. Shuffle/Repeat:

Repeat Song: Repeats the current track. Shuffle Albums: Plays all available albums in a selected list (playlists, artists, albums, songs, genres, or composers) in random order. Shuffle All Songs: Plays all available files in a selected list (playlists, artists, albums, songs, genres, or composers) in random order.

Interface Dial

uuPlaying an iPoduAudio Menu A

u d

io

18 ACURA RDX NAVI-31TX48500.book 229

1. Select More. 2. Select a setting item.

The following items are available: Sound: Displays the sound preferences screen.

2 Adjusting the Sound P. 183

Screen Settings: Displays the screen preferences screen. 2 Changing the Screen Settings P. 87

On Demand Multi-Use DisplayTM

229Continued

230

uuPlaying an iPoduAudio Menu

A u

d io

18 ACURA RDX NAVI-31TX48500.book 230

H MENU button (in iPod mode) u Music Search

1. Rotate to select a search category. Press .

2. Rotate to select a file from the Music Search list. Press .

How to Select a Song from the Music Search List

uuPlaying an iPoduSong By VoiceTM (SBV) A

u d

io

18 ACURA RDX NAVI-31TX48500.book 231

Song By VoiceTM (SBV) Use SBV to search for and play music from your HDD or iPod using voice commands.

H SETTINGS button u System Settings u Song By Voice

Rotate to select On or Off. Press .

The following items are available: On (factory default): Song By Voice commands are available. Off: Disable the feature.

Settings Song By VoiceTM (SBV)

231Continued

uuPlaying an iPoduSong By VoiceTM (SBV)

232

A u

d io

1 Searching for Music Using Song By VoiceTM (SBV)

Song By VoiceTM Commands List 2 Song By Voice Commands P. 349

NOTE: Song By VoiceTM commands are available for tracks stored on the HDD or iPod.

You can add phonetic modifications of difficult words so that it is easier for SBV to recognize artists, songs, albums, and composers in voice commands.

2 Phonetic Modification P. 233

SBV may not be able to recognize languages other than English for the artist name, song title, album title, and composers.

Once you have canceled this mode, you need to press the (Talk) button and say Music Search again to re-activate this mode.

18 ACURA RDX NAVI-31TX48500.book 232

1. Set the Song By Voice setting to On.

2. Press the (Talk) button and say Music Search to activate the SBV feature for the HDD and iPod.

3. Say a command. u Example 1: Say (List) Artist

A to view a list of songs by that artist. Select the desired song to start playing.

u Example 2: Say Play Artist A to start playing songs by that artist.

4. To cancel SBV, press the (Hang-Up/Back) button on the steering wheel. The selected song continues playing.

Searching for Music Using Song By VoiceTM (SBV)

uuPlaying an iPoduSong By VoiceTM (SBV) A

u d

io

1 Phonetic Modification

Phonetic Modification is grayed out when Song By Voice is set to Off.

You can store up to 2,000 phonetic modification items.

18 ACURA RDX NAVI-31TX48500.book 233

H SETTINGS button u System Settings u Song By Voice Phonetic Modification

Add phonetic modifications of difficult or foreign words so that it is easier for SBV to recognize artists, songs, albums, and composers in voice commands when searching for music on the HDD or iPod.

1. Move and rotate to select New Modification. Press .

2. Rotate to select HDD or iPod. Press .

Phonetic Modification

Continued 233

234

uuPlaying an iPoduSong By VoiceTM (SBV)

A u

d io

18 ACURA RDX NAVI-31TX48500.book 234

3. Rotate to select the item to modify (e.g., Artist). Press . u The list of the selected item

appears on the screen.

4. Rotate to select an entry (e.g., No Name). Press . u The pop-up menu appears on

the screen. 5. Rotate to select Modify. Press

. u To listen to the current

phonetic modification, rotate to select Play. Press .

u To delete the current phonetic modification, rotate to select Delete. Press .

uuPlaying an iPoduSong By VoiceTM (SBV) A

u d

io

18 ACURA RDX NAVI-31TX48500.book 235

6. Enter the phonetic spelling you wish to use (e.g., Artist A) when prompted.

7. Rotate to select OK to exit. The artist No Name is phonetically modified to Artist A. When in the SBV mode, you can press the (Talk) button and use the voice command Play Artist A to play songs by the artist No Name.

235

236

A u

d io

18 ACURA RDX NAVI-31TX48500.book 236

Playing Internet Radio

1 Selecting Internet Radio Mode

To find out if your phone is compatible with this feature, call 1-888-528-7876 or visit acura.com/ handsfreelink (U.S.) or handsfreelink.ca (Canada).

*: Pandora is available on U.S. models only.

Selecting Internet Radio Mode

1. Connect a compatible phone through Bluetooth. 2. Press the MENU button.(in AUDIO mode) 3. Rotate to select Change Source. Press . 4. Rotate to select Pandora* or Aha. Press .

1. Connect a compatible phone through Bluetooth. 2. Select Audio Source. 3. Select the Pandora* or Aha icon.

You can also connect the phone using your dock connector to the USB port.

Interface Dial

On Demand Multi-Use DisplayTM

iPhone

uuPlaying Internet RadiouPandora Menu* A

u d

io

1 Pandora Menu*

*: Pandora is available on U.S. models only.

Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission.

Pandora is a personalized Internet radio service that selects music based on an artist, song, or genre a user enters, and streams what is likely to be of interest.

You can control Pandora using voice commands. 2 Pandora Commands* P. 349

Available operating functions vary on software versions. Some functions may not be available on the vehicles audio system.

If there is a problem, you may see an error message on the navigation screen.

2 Pandora P. 327

To use this service in your vehicle, the Pandora app must first be installed on your phone. Visit www.pandora.com for more information.

If you cannot operate Pandora through the audio system, it may be streaming through Bluetooth Audio.

Make sure Pandora mode on your audio system is selected.

18 ACURA RDX NAVI-31TX48500.book 237

Pandora Menu*

Rotate to select an item. Press .

u Press the MENU button to display the menu items.

The following items are available: Create Station: Create a new station from genre, current track, or artist. Skip Forward: Skip the current song. Play/Pause: Pauses or plays a song. Station List: Displays the list of all your stored stations. Select a station from the

list to play. Like: Likes the current song. Pandora will play songs similar to the one liked. Dislike: Dislikes the current song and skips to the next song. Pandora will avoid

playing songs similar to the one disliked. Bookmark Track: Bookmarks the current song. Bookmark Artist: Bookmarks the current artist.

Interface Dial

237Continued * Not available on all models

uuPlaying Internet RadiouPandora Menu*

238

A u

d io

1 Pandora Menu*

There are restrictions on the number of songs you can skip or dislike in a given hour.

18 ACURA RDX NAVI-31TX48500.book 238

1. Select or to change a station.

2. Select to skip a song. u Select to pause or play a

song. u Select or to evaluate a

song. u Select More to display the

menu item. 2 Adjusting the Sound P. 183 2 Changing the Screen

Settings P. 87

On Demand Multi-Use DisplayTM

uuPlaying Internet RadiouAhaTM Radio Menu A

u d

io

1 AhaTM Radio Menu

AhaTM by Harman is a cloud-based service that organizes your favorite web content into live radio stations. You can access podcasts, internet radio, location-based services, and audio updates from social media sites.

You can control AhaTM Radio using voice commands. 2 Aha Commands* P. 349

Available operating functions vary on software versions. Some functions may not be available on the vehicles audio system.

If there is a problem, you may see an error message on the navigation screen.

2 AhaTM Radio P. 330

The menu items vary depending on the station you selected.

To use this service in your vehicle, the AcuraLink app must be installed on your phone. Visit owners.acura.com/apps (U.S.) or www.myacura.ca/ apps (Canada).

You must have a previously set up AhaTM account prior to using the service in your vehicle. Visit www.aharadio.com for more information.

On Canadian models, AhaTM is referred to as Streams. Visit acura.ca/owners/acuralink/streams for more information.

18 ACURA RDX NAVI-31TX48500.book 239

AhaTM Radio Menu

Rotate to select an item. Press .

u Press the MENU button to display the menu items.

Select or to skip contents. Select to pause or play a

song. Select an icon to evaluate a song. Select More to display the menu

item. 2 Adjusting the Sound P. 183 2 Changing the Screen Settings

P. 87

Interface Dial

On Demand Multi-Use DisplayTM

239Continued * Not available on all models

240

uuPlaying Internet RadiouAhaTM Radio Menu

A u

d io

18 ACURA RDX NAVI-31TX48500.book 240

H MENU button (in AhaTM mode) u Station List

Rotate to select a station form the Station list. Press .

How to Select a Station from the Station List

18 ACURA RDX NAVI-31TX48500.book 241

Playing a USB Flash Drive

A

u d

io

1 Connecting a USB Flash Drive

We recommend connecting the USB flash drive with the USB adapter cable.

Do not connect your USB flash drive using a hub. Do not use a device such as a card reader or hard

disc drive, as the device or your tracks may be damaged.

We recommend backing up your data before using the device in your vehicle.

1 USB Flash Drives

Digital music tracks, such as MP3, WMA, AAC, etc., in USB flash drives cannot be copied to HDD. Likewise, digital music tracks recorded to HDD cannot be copied to USB flash drives.

Files on the USB flash drive are played in their stored order. This order may be different from the order displayed on your PC or device.

1. Open the USB cover. 2. Install the USB flash drive to the USB connector.

Use a recommended USB flash drive of 256 MB or higher. Some digital audio players may not be compatible. Some USB flash drives (e.g., a device with security lockout) may not work. Some software files may not allow for audio play or text data display. Some versions of MP3, WMA, or AAC formats may be unsupported.

Connecting a USB Flash Drive

USB Flash Drives

241

242

uuPlaying a USB Flash DriveuSelecting USB Mode

A u

d io

1 Selecting USB Mode

You can control a USB flash drive using voice commands.

2 USB Commands P. 349

Files in WMA/ACC format protected by digital rights management (DRM) cannot be played.

The audio system displays Unplayable File, and then skips to the next file.

If there is a problem, you may see an error message on the navigation screen.

2 iPod/USB Flash Drive P. 326

18 ACURA RDX NAVI-31TX48500.book 242

Selecting USB Mode

1. Connect the USB flash drive to the USB port in the console compartment. 2. Press the MENU button. (in AUDIO mode) 3. Rotate to select Change Source. Press . 4. Rotate to select USB. Press .

1. Connect the USB flash drive to the USB port in the console compartment. 2. Select Audio Source. 3. Select the USB icon.

Interface Dial

On Demand Multi-Use DisplayTM

uuPlaying a USB Flash DriveuAudio Screen Control A

u d

io

1 Audio Screen Control

Random: Random in Folder: Plays all files in the current folder in random order. Random All Tracks: Plays all files in random order.

Repeat: Repeat Folder: Repeats all files in the current folder. Repeat Track: Repeats the current file.

Scan: Folders: Provides 10-second sampling of the first file in each of the main folders. Tracks: Provides 10-second sampling of all files in the current folder.

On Demand Multi-Use DisplayTM

18 ACURA RDX NAVI-31TX48500.book 243

Audio Screen Control Control the audio system through the navigation screen and On Demand Multi-Use DisplayTM.

1. Rotate or press to display the song list.

2. Rotate or move or to select a song from the list. Press

. u Press the MENU button to

display the menu items. 2 Audio Menu P. 244

1. Select to skip to the next folder, and to skip to the beginning of the previous folder.

2. Select or to change files. Select and hold to move rapidly within a file. u Select More to display the

menu item. 2 Audio Menu P. 244

Interface Dial

On Demand Multi-Use DisplayTM

243

244

uuPlaying a USB Flash DriveuAudio Menu

A u

d io

18 ACURA RDX NAVI-31TX48500.book 244

Audio Menu H MENU button (in USB mode)

Rotate to select an item. Press .

The following items are available: Sound: Adjusts the settings of the audio speakers sound.

2 Adjusting the Sound P. 183

Music Search: Selects a file from the Music Search list. 2 How to Select a File from the Music Search List P. 246

Change Source: Changes the audio source mode. Scan:

Scan Folders: Provides 10-second sampling of the first file in each of the main folders. Scan Tracks: Provides 10-second sampling of all files in the current folder.

Random/Repeat: Repeat Folder: Repeats all files in the current folder. Repeat Track: Repeats the current file. Random in Folder: Plays all files in the current folder in random order. Random All Tracks: Plays all files in random order.

Interface Dial

uuPlaying a USB Flash DriveuAudio Menu A

u d

io

18 ACURA RDX NAVI-31TX48500.book 245

1. Select More. 2. Select a setting item.

The following items are available: Sound: Displays the sound preferences screen.

2 Adjusting the Sound P. 183

Screen Settings: Displays the screen preferences screen. 2 Changing the Screen Settings P. 87

On Demand Multi-Use DisplayTM

245Continued

246

uuPlaying a USB Flash DriveuAudio Menu

A u

d io

18 ACURA RDX NAVI-31TX48500.book 246

H MENU button (in USB mode) u Music Search

1. Move or to select a search category. Press .

2. Rotate to select a file from the Music Search list. Press .

How to Select a File from the Music Search List

18 ACURA RDX NAVI-31TX48500.book 247

Playing Bluetooth Audio

A

u d

io

1 Playing Bluetooth Audio

Not all Bluetooth-enabled phones with streaming audio capabilities are compatible with the system.

For a list of compatible phones, call 1-888-528-7876 or visit www.acura.com/handsfreelink (U.S.) or www.handsfreelink.ca (Canada).

State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.

If more than one phone is paired to the HFL system, there will be a delay before the system begins to play.

You can control Bluetooth Audio using voice commands.

2 Bluetooth Audio Commands P. 349

Your audio system allows you to listen to music from your Bluetooth-compatible phone. This function is available when the phone is paired and connected to the vehicles Bluetooth HandsFreeLink (HFL) system.

2 Bluetooth HandsFreeLink P. 252

Selecting Bluetooth Audio Mode

1. Make sure that your phone is on, paired, and linked to HFL. 2 Pairing a Phone P. 255

2. Press the MENU button. (in AUDIO mode) 3. Rotate to select Change Source. Press . 4. Rotate to select Bluetooth Audio. Press .

1. Make sure that your phone is on, paired, and linked to HFL. 2 Pairing a Phone P. 255

2. Select Audio Source. 3. Select the Bluetooth icon.

Interface Dial

On Demand Multi-Use DisplayTM

247

248

uuPlaying Bluetooth AudiouAudio Screen Control

A u

d io

1 Audio Screen Control

To play the audio files, you may need to operate your phone. If so, follow the phone makers operating instructions.

The pause function and Music Search may not be available on some phones.

Switching to another mode pauses the music playing from your phone. This function may not be available on some phones.

18 ACURA RDX NAVI-31TX48500.book 248

Audio Screen Control Control the audio system through the navigation screen and On Demand Multi-Use DisplayTM.

1. Press the MENU button. (in BT mode).

2. Rotate to select an item. Press .

The following items are available: Sound: Adjusts the settings of the audio speakers sound.

2 Adjusting the Sound P. 183

Music Search: Selects a song from the Music Search list. Change Source: Changes the audio source mode. Play: Plays a song. Pause: Pauses a song.

Interface Dial

uuPlaying Bluetooth AudiouAudio Screen Control A

u d

io

18 ACURA RDX NAVI-31TX48500.book 249

1. Select or to change folders. 2. Select or to change files.

u Select More to display the menu items, then select a setting item.

u Select or to play or pause a song file.

The following items are available: Sound: Displays the sound preferences screen.

2 Adjusting the Sound P. 183

Screen Settings: Displays the screen preferences screen. 2 Changing the Screen Settings P. 87

On Demand Multi-Use DisplayTM

249

250

18 ACURA RDX NAVI-31TX48500.book 250

18 ACURA RDX NAVI-31TX48500.book 251

Bluetooth HandsFreeLink

This section describes how to operate Bluetooth HandsFreeLink. You can place and

receive phone calls using your vehicles audio system without handling your mobile phone.

51

Bluetooth HandsFreeLink ..................252 Using HFL .............................................252 Pairing a Phone.....................................255 Importing Phonebook Data ...................261 Setting Up Speed Dialing ......................262 Phonebook Phonetic Modification.........268 Phone Settings......................................273 Making a Call .......................................278 Receiving a Call.....................................283 Options During a Call............................284

2

Text/E-mail Message ............................ 285 Setting a Text/E-mail Message .............. 285 Selecting a Mail Account...................... 286 Receiving a Text/E-mail Message .......... 287 Displaying Messages ............................ 288

Roadside Assistance ............................. 292 HFL Menus ............................................. 293

252

B lu e to o th H

an d

sFreeLin k

18 ACURA RDX NAVI-31TX48500.book 252

Bluetooth HandsFreeLink

1 Bluetooth HandsFreeLink

To use HFL, you need a Bluetooth-compatible mobile phone. For a list of compatible phones, pairing procedures, and special feature capabilities: Call 1-888-528-7876 or visit www.acura.com/ handsfreelink (U.S.) or www.handsfreelink.ca (Canada).

Voice control tips: Aim the vents away from the ceiling and close the

windows, as noise coming from them may interfere with the microphone.

Press and release the (Talk) button when you want to call a number using a stored voice tag, a phonebook name, or a number. Speak clearly and naturally after a beep.

If the microphone picks up voices other than yours, the command may be misinterpreted.

To change the volume level, use the audio systems volume knob or the remote audio controls on the steering wheel.

State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.

If you receive a call while using the audio system, the system resumes its operation an after ending the call.

If you press (Talk) button, the climate control fan speed is reduced automatically. When voice recognition ends, the fan speed returns to the previous level.

Using HFL

(Pick-Up) button: Press to go to a phone-specific voice command screen or to answer an incoming call.

(Hang-Up/Back) button: Press to end a call, or to cancel a command. (Talk) button: Press to give HFL voice commands.

PHONE button: Press to go directly to the Phone screen. Interface dial: Rotate to select an item on the screen, then press . Move ,

, or to select secondary menu.

HFL Buttons

Volume up

(Pick-Up) button

(Hang-Up/Back) button

(Talk) button

Microphone

PHONE Button

Interface Dial

Volume down

uuBluetooth HandsFreeLinkuUsing HFL B lu e to o th H

an d

sFreeLin k

1 Bluetooth HandsFreeLink

Bluetooth Wireless Technology The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motor Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.

HFL Limitations An incoming call on HFL will interrupt the audio system when it is playing. It will resume when the call is ended. Bluetooth HandsFreeLink (HFL) allows you to place and receive phone calls using your vehicles navigation system, without handling your mobile phone.

18 ACURA RDX NAVI-31TX48500.book 253

The navigation screen notifies you when there is an incoming call.

HFL Status Display

Bluetooth Indicator Comes on when your phone is connected to HFL.

Callers Name

Callers Number

Battery Level Status

Roam Status

Signal Strength

Continued 253

uuBluetooth HandsFreeLinkuUsing HFL

254

B lu e to o th H

an d

sFreeLin k

1 HFL Status Display

The information that appears on the navigation screen varies between phone models.

You can change the system language to English, French, or Spanish.

2 Language Settings P. 34

18 ACURA RDX NAVI-31TX48500.book 254

Certain manual functions are disabled or inoperable while the vehicle is in motion.

You cannot select a grayed-out option until the vehicle is stopped.

Only previously stored speed dial entries with voice tags, phonebook names, or numbers can be called using voice commands while the vehicle is in motion.

2 Setting Up Speed Dialing P. 262

Limitations for Manual Operation

Disabled Option

uuBluetooth HandsFreeLinkuPairing a Phone B lu e to o th H

an d

sFreeLin k

1 Pairing a Phone

Your Bluetooth-compatible phone must be paired to HFL before you can make and receive hands-free calls.

Phone Pairing Tips: You cannot pair your phone while the vehicle is

moving. Up to six phones can be paired. Your phone's battery may drain faster when it is

connected to HFL. If your phone is not ready for pairing or not found

by the system within three minutes, the system will time out and returns to idle.

Once you have paired a phone, you can see it displayed on the screen with one or two icons on the right side.

These icons indicate the following: : The phone can be used with HFL. : The phone is compatible with Bluetooth

Audio.

18 ACURA RDX NAVI-31TX48500.book 255

Pairing a Phone H PHONE button

When no Bluetooth-compatible phone is paired, the following screen appears: 1. Rotate to select Yes. Press . 2. Make sure your phone is in search

or discoverable mode. Press . u HFL automatically searches for

a Bluetooth device.

3. When your phone appears on the list, select it by pressing . u If your phone does not appear,

you can select Refresh to search again.

u If your phone still does not appear, move to select Device Not Found? and search for Bluetooth devices using your phone. From your phone, select HandsFreeLink.

255Continued

uuBluetooth HandsFreeLinkuPairing a Phone

256

B lu e to o th H

an d

sFreeLin k

1 Pairing a Phone

When pairing is completed, an Automatic Phone Sync prompt appears. Select On if you want your call history and phonebook automatically imported to HFL.

2 Automatic Phone Sync Setting P. 277

Some phones may have an additional setting to allow the phone to auto connect each time you turn on your vehicle.

18 ACURA RDX NAVI-31TX48500.book 256

4. HFL gives you a pairing code on the navigation screen. u Confirm if the pairing code on

the screen and your phone match. This may vary by phone.

5. You will receive a notification on the screen if pairing is successful.

H PHONE button u Phone Settings u Connect Phone

1. Rotate to select Add Bluetooth Device.

2. Make sure your phone is in search or discoverable mode. Press . u HFL automatically searches for

a Bluetooth device.

Pairing from Phone Setup

uuBluetooth HandsFreeLinkuPairing a Phone B lu e to o th H

an d

sFreeLin k

18 ACURA RDX NAVI-31TX48500.book 257

3. When your phone appears on the list, select it by pressing . u If your phone does not appear,

you can select Refresh to search again.

u If your phone still does not appear, move to select Device Not Found? and search for Bluetooth devices using your phone. From your phone, select HandsFreeLink.

4. HFL gives you a pairing code on the navigation screen. u Confirm if the pairing code on

the screen and your phone match. This may vary by phone.

5. You will receive a notification on the screen if pairing is successful.

257Continued

uuBluetooth HandsFreeLinkuPairing a Phone

258

B lu e to o th H

an d

sFreeLin k

1 Changing the Pairing Code

The pairing code may be six or four digits depending on your phone.

The default pairing code is 0000 until you change the setting.

To create your own, select Fixed, and delete the current code, then enter a new one.

For a randomly generated pairing code each time you pair a phone, select Random.

18 ACURA RDX NAVI-31TX48500.book 258

H SETTINGS button u System Settings u Edit Pairing Code

Rotate to select Fixed or Random. Press .

Changing the Pairing Code

uuBluetooth HandsFreeLinkuPairing a Phone B lu e to o th H

an d

sFreeLin k

1 Changing the Currently Paired Phone

The replaced phone will keep the same speed dial entries, and security PIN information from the previously paired phone.

18 ACURA RDX NAVI-31TX48500.book 259

H SETTINGS button u Phone Settings u Bluetooth Device List

1. Rotate to select a paired phone you want to replace. Press

. 2. Rotate to select Replace This

Device. Press . 3. HFL enters the pairing process and

searches a new phone. u Follow the prompts to pair a

new phone. 4. You will receive a notification on

the screen if pairing is successful.

Changing the Currently Paired Phone

Continued 259

260

uuBluetooth HandsFreeLinkuPairing a Phone

B lu e to o th H

an d

sFreeLin k

18 ACURA RDX NAVI-31TX48500.book 260

H SETTINGS button u Phone Settings u Bluetooth Device List

1. Rotate to select a paired phone you want to replace. Press

. 2. Rotate to select Delete This

Device. Press .

3. You will receive a confirmation message on the screen. Rotate

to select Yes. Press . 4. You will receive a notification on

the screen if deletion is successful.

Deleting a Paired Phone

uuBluetooth HandsFreeLinkuImporting Phonebook Data B lu e to o th H

an d

sFreeLin k

1 Importing Phonebook Data

When you select a person from the list in the mobile phonebook, you can see up to three category icons. The icons indicate what types of numbers are stored for that name.

On some phones, it may not be possible to import the category icons to HFL.

The phonebook is updated after every connection. Call history is updated after every connection or call.

Pref

Home

Mobile

Work

Fax

Car

Other

Pager

Message

Voice

18 ACURA RDX NAVI-31TX48500.book 261

Importing Phonebook Data When your phone is paired, the contents of its phonebook and call history are automatically imported to HFL.

261

262

uuBluetooth HandsFreeLinkuSetting Up Speed Dialing

B lu e to o th H

an d

sFreeLin k

1 Setting Up Speed Dialing

When a voice tag is stored, press the (Talk) button to call the number using the voice tag. Say Call and the voice tag name.

Voice tags allow you to call speed dial entries from the Voice Portal screen or Phone call screen by saying the voice tag name.

18 ACURA RDX NAVI-31TX48500.book 262

Setting Up Speed Dialing H MENU button (on Phone screen) u Speed Dial

Up to 20 speed dial numbers can be stored per phone. 1. Rotate to select New Entry.

Press .

2. Rotate to select a number entry method. Press .

The following options are available: Import from Call History: Select a number from the call history. Manual Input: Input the number manually. Import from Phonebook: Select a number from the linked mobile phone's

imported phonebook.

uuBluetooth HandsFreeLinkuSetting Up Speed Dialing B lu e to o th H

an d

sFreeLin k

1 Registering a Voice Tag to a Speed Dial Entry

Avoid using duplicate voice tags.

Avoid using home as a voice tag.

It is easier for HFL to recognize a longer name. For example, use John Smith instead of John.

18 ACURA RDX NAVI-31TX48500.book 263

H SETTINGS button u Phone Settings u Edit Speed Dial

1. Select an existing speed dial entry. 2. From the pop-up menu, rotate

to select Edit. Press . 3. Rotate to select Voice Tag.

Press . 4. From the pop-up menu, rotate

to select Record. Press .

5. Press . u Using the (Talk) button,

follow the prompt to enter a voice tag.

Registering a Voice Tag to a Speed Dial Entry

Continued 263

264

uuBluetooth HandsFreeLinkuSetting Up Speed Dialing

B lu e to o th H

an d

sFreeLin k

18 ACURA RDX NAVI-31TX48500.book 264

To delete a voice tag 1. Select an existing speed dial entry. 2. From the pop-up menu, rotate

to select Edit. Press . 3. Rotate to select Voice Tag.

Press . 4. From the pop-up menu, rotate

to select Clear. Press . 5. You will receive a confirmation

message on the screen. Rotate to select Yes. Press .

To delete a speed dial 1. Select an existing speed dial entry. 2. From the pop-up menu, rotate

to select Delete. Press . 3. You will receive a confirmation

message on the screen. Rotate to select Yes. Press .

uuBluetooth HandsFreeLinkuSetting Up Speed Dialing B lu e to o th H

an d

sFreeLin k

1 Setting Phone Shortcuts

Dial icon You can make a call using the keyboard on the On Demand Multi-Use DisplayTM to input numbers.

2 Entering a Phone Number P. 280

18 ACURA RDX NAVI-31TX48500.book 265

You can preset five previously stored speed dial entries, and make a call from one of the preset numbers, or call history when the phone is paired and connected to the vehicles Bluetooth HandsFreeLink (HFL) system.

2 Setting Up Speed Dialing P. 262

To preset a speed dial 1. Select Shortcuts. 2. Select Phone. 3. Select Speed Dial. 4. Select Edit or No Entry.

u If you select No Entry, go to step 6.

5. Select Add and select a preset number you want to store as a shortcut. u Five presets appear. Select a No

Entry preset or an existing preset.

u The screen changes to a list of previously stored speed dial entries.

Setting Phone Shortcuts

Continued 265

266

uuBluetooth HandsFreeLinkuSetting Up Speed Dialing

B lu e to o th H

an d

sFreeLin k

18 ACURA RDX NAVI-31TX48500.book 266

6. Select a phone number you want to store as a shortcut. Select OK and press .

To make a call from a speed dial entry 1. Select Shortcuts. 2. Select Phone. 3. Select Speed Dial. 4. Select a preset number.

u Dialing starts automatically.

uuBluetooth HandsFreeLinkuSetting Up Speed Dialing B lu e to o th H

an d

sFreeLin k

1 To make a call from call history

The call history displays the last six dialed, received, or missed calls.

18 ACURA RDX NAVI-31TX48500.book 267

To delete a speed dial 1. Select Shortcuts. 2. Select Phone. 3. Select Speed Dial. 4. Select Edit. 5. Select Delete. 6. Select the preset number with the

phone number you want to delete.

To make a call from call history 1. Select Shortcuts. 2. Select Phone. 3. Select Call History. 4. Select a phone number.

u Dialing starts automatically.

267

268

uuBluetooth HandsFreeLinkuPhonebook Phonetic Modification

B lu e to o th H

an d

sFreeLin k

1 Phonebook Phonetic Modification

You can store up to 20 phonetic modification items.

18 ACURA RDX NAVI-31TX48500.book 268

Phonebook Phonetic Modification H SETTINGS button u System Settings u Phonebook Phonetic Modification

Add phonetic modifications or a new voice tag to the phone's contact name so that it is easier for HFL to recognize voice commands.

To add a new voice tag 1. Rotate to select the phone

you want to add phonetic modification to. Press .

2. Rotate to select New Voice Tag. Press .

uuBluetooth HandsFreeLinkuPhonebook Phonetic Modification B lu e to o th H

an d

sFreeLin k

18 ACURA RDX NAVI-31TX48500.book 269

3. Move or and Rotate to select a contact name. Press . u The pop-up menu appears on

the screen.

4. Rotate to select Modify. Press .

5. Using the (Talk) button, follow the prompts to complete the voice tag.

6. You will receive a confirmation message on the screen. Rotate

to select OK. Press . 7. The screen returns to the New

Voice Tag screen. Move and rotate to select OK. Press .

269Continued

uuBluetooth HandsFreeLinkuPhonebook Phonetic Modification

270

B lu e to o th H

an d

sFreeLin k

1 Phonebook Phonetic Modification

You can only modify or delete contact names for the currently connected phone.

18 ACURA RDX NAVI-31TX48500.book 270

To modify a voice tag 1. Rotate to select the phone

you want to add phonetic modification to. Press .

2. Rotate to select a contact name you want to modify. Press

. u The pop-up menu appears on

the screen.

3. Rotate to select Modify. Press .

4. Using the (Talk) button, follow the prompts to complete the voice tag.

5. You will receive a confirmation message on the screen. Rotate

to select OK. Press .

uuBluetooth HandsFreeLinkuPhonebook Phonetic Modification B lu e to o th H

an d

sFreeLin k

18 ACURA RDX NAVI-31TX48500.book 271

To delete a modified voice tag 1. Rotate to select the phone

you want to delete phonetic modification. Press .

2. Rotate to select a contact name you want to delete. Press

. u The pop-up menu appears on

the screen.

3. Rotate to select Delete, then press . u Items to be deleted are

indicated with a trash icon.

4. Move and Rotate to select OK. Press .

Trash icon

271Continued

272

uuBluetooth HandsFreeLinkuPhonebook Phonetic Modification

B lu e to o th H

an d

sFreeLin k

18 ACURA RDX NAVI-31TX48500.book 272

To delete all modified voice tags 1. Rotate to select the phone

you want to delete phonetic modification. Press . u The contact name list appears.

2. Move and Rotate to select Delete All. Press .

3. You will receive a confirmation message on the screen. Rotate

to select OK. Press .

uuBluetooth HandsFreeLinkuPhone Settings B lu e to o th H

an d

sFreeLin k

1 Editing a Security PIN

If the phone is already security PIN protected, you need to enter the current security PIN before clearing the PIN or creating a new one.

You can use the keyboard on the On Demand Multi- Use DisplayTM to input numbers. Select numbers, then OK.

18 ACURA RDX NAVI-31TX48500.book 273

Phone Settings Set HFL options and features.

H SETTINGS button u Phone Settings u Bluetooth Device List

You can protect each of the six mobile phones with a security PIN. 1. Rotate to select the phone

you want to add a security PIN to. Press .

2. Rotate to select Edit PIN. Press .

3. Enter a new four-digit number. Rotate to select OK to enter the security PIN. u Move to delete.

4. Re-enter the four-digit number. u The screen returns to the screen

in step 4.

Editing a Security PIN

273Continued

uuBluetooth HandsFreeLinkuPhone Settings

274

B lu e to o th H

an d

sFreeLin k

1 Editing User Name

You can use the keyboard on the On Demand Multi- Use DisplayTM to input letters and numbers.

18 ACURA RDX NAVI-31TX48500.book 274

H SETTINGS button u Phone Settings u Bluetooth Device List

Edit the user name of a paired phone as follows: 1. Rotate to select a phone you

want to edit. Press . 2. Rotate to select Edit Device

Name. Press .

3. Enter a new name of the phone. u Rotate or move to select

OK to enter the name. Press .

u Move to delete.

Editing User Name

uuBluetooth HandsFreeLinkuPhone Settings B lu e to o th H

an d

sFreeLin k

18 ACURA RDX NAVI-31TX48500.book 275

H SETTINGS button u Phone Settings u Auto Transfer

If you get into the vehicle while you are on the phone, the call can be automatically transferred to HFL.

Rotate to select On. Press .

H SETTINGS button u Phone Settings u Auto Answer

You can set HFL to automatically answer an incoming call in four seconds. Rotate to select On. Press .

Automatic Transferring

Auto Answer

275Continued

276

uuBluetooth HandsFreeLinkuPhone Settings

B lu e to o th H

an d

sFreeLin k

18 ACURA RDX NAVI-31TX48500.book 276

H SETTINGS button u Phone Settings u Ring Tone

You can change the ring tone setting. Rotate to select your desired setting item. Press .

The following items are available: Fixed: The fixed ring tone sounds from the speaker. Mobile Phone: The ring tone stored in the connected mobile phone sounds

from the speaker. Off: No ring tones sound from the speaker.

Ring Tone

uuBluetooth HandsFreeLinkuPhone Settings B lu e to o th H

an d

sFreeLin k

1 Automatic Phone Sync Setting

Select On if you want your call history and phonebook automatically imported to HFL. If prompted by your phone, please accept the import request. Not all phones require this additional step.

18 ACURA RDX NAVI-31TX48500.book 277

H SETTINGS button u Phone Settings u Automatic Phone Sync

Rotate to select On or Off. Press .

H SETTINGS button u Phone Settings u Use Contact Photo

You can display a caller's picture on an incoming call screen. Rotate to select On. Press .

Automatic Phone Sync Setting

Use Contact Photo

277

278

uuBluetooth HandsFreeLinkuMaking a Call

B lu e to o th H

an d

sFreeLin k

1 Making a Call

Any voice-tagged speed dial entry, phonebook name, or number can be dialed by voice from most screens. Press the (Talk) button and say Call and the voice tag name, Call by name and the phonebook name, or Call and the phone number.

The maximum range between your phone and vehicles is 30 ft (10 m).

Once a call is connected, you can hear the voice of the person you are calling through the audio speakers.

18 ACURA RDX NAVI-31TX48500.book 278

Making a Call You can make calls by inputting any phone number, or by using the imported phonebook, call history, speed dial entries, or redial.

uuBluetooth HandsFreeLinkuMaking a Call B lu e to o th H

an d

sFreeLin k

1 Using the Phonebook

This function is disabled while the vehicle is moving. However, you can call a stored voice-tagged speed dial number, phonebook name, or number using voice commands.

2 Limitations for Manual Operation P. 254 2 Setting Up Speed Dialing P. 262

You can use the keyboard on the On Demand Multi- Use DisplayTM for an alphabetical search.

18 ACURA RDX NAVI-31TX48500.book 279

H MENU button (on Phone screen) u Phonebook

1. The phonebook is stored alphabetically. Move to Search. u You can use the keyboard on

the touchscreen for an alphabetical search.

2. Rotate to select a number. Press . u Dialing starts automatically.

Using the Phonebook

Continued 279

uuBluetooth HandsFreeLinkuMaking a Call

280

B lu e to o th H

an d

sFreeLin k

1 Entering a Phone Number

This function is disabled while the vehicle is moving. However, you can call a stored voice-tagged speed dial number, phonebook name, or number using voice commands.

2 Limitations for Manual Operation P. 254 2 Setting Up Speed Dialing P. 262

You can use the keyboard on the On Demand Multi- Use DisplayTM to input numbers. Select numbers, then

to start dialing.

18 ACURA RDX NAVI-31TX48500.book 280

H MENU button (on Phone screen) u Dial

1. Rotate to select a number. Press .

2. Rotate to select . Press .

Entering a Phone Number

uuBluetooth HandsFreeLinkuMaking a Call B lu e to o th H

an d

sFreeLin k

18 ACURA RDX NAVI-31TX48500.book 281

H MENU button (on Phone screen) u Redial

You can display a caller's picture on an incoming call screen. Rotate to select Dial. Press . u Dialing starts automatically.

Using Redial

281Continued

uuBluetooth HandsFreeLinkuMaking a Call

282

B lu e to o th H

an d

sFreeLin k

1 Using Call History

The call history displays the last 20 dialed, received, or missed calls. (Appears only when a phone is connected to HFL.)

These icons next to the number indicate the following: : Dialed calls : Received calls : Missed calls

1 Using Speed Dial

Move to select More Speed Dials to view another paired phone's speed dial list. You can make a call from that list using the currently connected phone.

When a voice tag is stored, press the (Talk) button to call the number using the voice tag.

2 Setting Up Speed Dialing P. 262

Any voice-tagged speed dial entry, phonebook name or number can be dialed by voice from any screen. Press the (Talk) button and follow the prompts.

18 ACURA RDX NAVI-31TX48500.book 282

H MENU button (on Phone screen) u Call History

Call history is stored by All, Dialed, Received, and Missed.

1. Move or to select All, Dialed, Received, and Missed.

2. Rotate to select a number. Press . u Dialing starts automatically.

H MENU button (on Phone screen) u Speed Dial

Rotate to select a number. Press .

u Dialing starts automatically.

Using Call History

Navigation screen

Using Speed Dial

Navigation screen

uuBluetooth HandsFreeLinkuReceiving a Call B lu e to o th H

an d

sFreeLin k

1 Receiving a Call

Call Waiting Press the (Pick-Up) button to put the current call on hold to answer the incoming call. Press the (Pick-Up) button again to return to the current call. Ignore the incoming call if you do not want to answer it. Press the (Hang-Up/Back) button if you want to hang up the current call. You can select the icons on the On Demand Multi- Use DisplayTM instead of the (Pick-Up) and (Hang-Up/Back) buttons.

18 ACURA RDX NAVI-31TX48500.book 283

Receiving a Call When there is an incoming call, an audible notification sounds (if activated) and the Incoming call screen appears.

1. Press the (Pick-Up) button to answer the call.

2. Press the (Hang-Up/Back) button to decline or end the call.

283

284

uuBluetooth HandsFreeLinkuOptions During a Call

B lu e to o th H

an d

sFreeLin k

1 Options During a Call

Touch Tones: Available on some phones.

You can select the icons on the On Demand Multi- Use DisplayTM.

18 ACURA RDX NAVI-31TX48500.book 284

Options During a Call The available options are shown on the Phone screen.

Rotate to select the option. Press .

u The mute icon appears when Mute is selected. Select Mute again to turn it off.

The following options are available during a call: Mute: Mute your voice. Transfer: Transfer a call from HFL to your phone. Touch Tones: Send numbers during a call. This is useful when you call a menu-

driven phone system.

18 ACURA RDX NAVI-31TX48500.book 285

Text/E-mail Message

B lu e to o th H

an d

sFreeLin k

1 Text/E-mail Message

Some text/e-mail features may not be available depending on a mobile phone.

Setting a Text/E-mail Message

H SETTINGS button u Phone Settings u Enable Text/Email

Rotate to select On or Off. Press .

H SETTINGS button u Phone Settings u New Text/Email Alert

Rotate to select On or Off. Press .

The following items are available: On: A pop-up notification comes on every time you receive a new text message. Off: The message you receive is stored in the system without notification.

To Turn On or Off the Text/E-mail Function

To Turn On or Off the Text/E-mail Notice

285

286

uuText/E-mail MessageuSelecting a Mail Account

B lu e to o th H

an d

sFreeLin k

1 Selecting a Mail Account

You can also select a mail account from the folder list screen or the message list screen. Move to select Select Account, then press .

You can only receive notifications from one text message or mail account at a time.

18 ACURA RDX NAVI-31TX48500.book 286

Selecting a Mail Account H SETTINGS button u Phone Settings u Select Account

If a paired phone has text message or mail accounts, you can select one of them to be active and receive notifications.

Rotate to Text Messages or an e-mail account you want. Press .

uuText/E-mail MessageuReceiving a Text/E-mail Message B lu e to o th H

an d

sFreeLin k

1 Receiving a Text/E-mail Message

The system does not display any received messages while you are driving. You can only hear them read aloud.

With some phones, you may be able to display up to 20 most recent text and e-mail messages.

State or local laws may limit your use of the HFL text/ e-mail message feature. Only use the text/e-mail message feature when conditions allow you to do so safely.

When you receive a text or e-mail message for the first time since the phone is paired to HFL, you are asked to turn the New Text/Email Alert setting to On.

2 To Turn On or Off the Text/E-mail Notice P. 285

18 ACURA RDX NAVI-31TX48500.book 287

Receiving a Text/E-mail Message HFL can display newly received text and e-mail messages as well as 20 of the most recently received messages on a linked mobile phone. Each received message can be read aloud and replied to using a fixed common phrase.

1. A pop-up appears and notifies you of a new text or e-mail message.

2. Rotate to select Read to listen to the message. Press . u The text or e-mail message is

displayed. The system automatically starts reading out the message.

3. To discontinue the message read- out. Press .

287

288

uuText/E-mail MessageuDisplaying Messages

B lu e to o th H

an d

sFreeLin k

1 Displaying Messages

The icon appears next to an unread message.

If you delete a message on the phone, the message is also deleted in the system. If you send a message from the system, the message goes to your phones outbox.

To see the previous or next message, move or on the text message screen.

Some phones may have an additional setting to enable this feature.

18 ACURA RDX NAVI-31TX48500.book 288

Displaying Messages

H MENU button (on Phone screen) u Text/Email

1. Select account if necessary. 2. Rotate to select a message.

Press . u The text message is displayed.

The system automatically starts reading the message aloud.

Displaying Text Messages

uuText/E-mail MessageuDisplaying Messages B lu e to o th H

an d

sFreeLin k

1 Displaying E-mail Messages

Received text and e-mail messages may appear in the message list screen at the same time. In this case, text messages are titled No subject.

18 ACURA RDX NAVI-31TX48500.book 289

H MENU button (on Phone screen) u Text/Email

1. Rotate to select a folder. Press .

2. Rotate to select a message. Press . u The text message is displayed.

The system automatically starts reading the message aloud.

Displaying E-mail Messages

Continued 289

290

uuText/E-mail MessageuDisplaying Messages

B lu e to o th H

an d

sFreeLin k

18 ACURA RDX NAVI-31TX48500.book 290

1. Go to the text or e-mail message screen. u The system automatically starts

reading the message aloud. 2 Displaying Messages P. 288

2. Press to stop reading. Press again to start reading the message from the beginning.

1. Go to the text or e-mail message screen. u The system automatically starts

reading the message aloud. 2 Displaying Messages P. 288

2. Move and Rotate to select Reply. Press .

Read or Stop Reading a Message

Reply to a Message

uuText/E-mail MessageuDisplaying Messages B lu e to o th H

an d

sFreeLin k

1 Reply to a Message

The available fixed reply messages are as follows: Talk to you later, Im driving. Im on my way. Im running late. OK Yes No You cannot add, edit, or delete reply messages.

Only certain phones receive and send messages when paired and connected. For a list of compatible phones: U.S.: Visit www.acura.com/handsfreelink, or call

1-888-528-7876. Canada: Visit www.handsfreelink.ca, or call

1-888-528-7876.

18 ACURA RDX NAVI-31TX48500.book 291

3. Rotate to select the reply message. Press . u The pop-up menu appears on

the screen. 4. Select Send to send the message.

u Message Sent appears on the screen when the reply message was successfully sent.

1. Go to the text message screen. The system automatically starts reading the message aloud.

2 Displaying Text Messages P. 288

2. Move and Rotate to select Call. Press .

Calling the Sender

291

292

B lu e to o th H

an d

sFreeLin k

18 ACURA RDX NAVI-31TX48500.book 292

Roadside Assistance

1 Roadside Assistance

If you are subscribed to a paid AcuraLink package, you can call the roadside assistance using the LINK button instead of your phone.

2 AcuraLink P. 298

This function is not available on all models.

H MENU button (on Phone screen) u Roadside Assistance

Provides a nationwide service for unexpected incidents. You can call for assistance using a phone paired and connected to Bluetooth HandsFreeLink.

Rotate to select a phone number. Press . u Dialing starts automatically.

18 ACURA RDX NAVI-31TX48500.book 293

HFL Menus

B lu e to o th H

an d

sFreeLin k

1 HFL Menus

To use HFL, you must first pair your Bluetooth- compatible mobile phone to the system while the vehicle is parked.

Some functions are limited while driving. A message appears on the screen when the vehicle is moving and the operation is canceled.

dit Device Name

Edit PIN

Replace This Device

elete This Device

Edit the user name of a paired phone.

Create a security PIN for a paired phone. Replace a previously paired phone with a new phone. Delete a previously paired phone.

ne to the system.

the system.

aired phone from the system.

the system.

The power mode must be in ACCESSORY or ON to use HFL.

Phone settings screen 1. Press the SETTINGS button. 2. Rotate to select Phone

Settings, then press .

Phone Connect phone

Bluetooth Device List

Add Bluetooth Device

(Existing entry list)

Disconnect

Add Bluetooth Device

E

(Existing entry list)

D

Connect a pho

Pair a phone to

Disconnect a p

Pair a phone to

293Continued

294

uuHFL Menusu

B lu e to o th H

an d

sFreeLin k

Import from Call History

Manual Input Enter a phone number to store as a speed dial number.

Select a phone number from the call history to store as a speed dial number. Select a phone number from the phonebook to store as a speed dial number.

Edit a previously stored speed dial number. Change a number. Create or delete a voice tag. Delete a previously stored speed dial number.

Delete

our phone to HFL when you enter the vehicle.

the previously stored speed dial numbers.

Import from Phonebook

Edit

incoming call after about four seconds.

imported when a phone is paired to HFL.

call screen.

Phone Settings group as default.

n and off.

.

the screen when HFL receives a new text/e-mail message.

18 ACURA RDX NAVI-31TX48500.book 294

Text/ Email*1

Set calls to automatically transfer from y

Delete all

Edit Speed Dial

Auto Transfer

Auto Answer

Automatic Phone Sync

Use Contact Photo

Default

Enable Text/Email

Select Account

New Text/Email Alert

Ring Tone

Delete All

New Entry

(Existing entry list)

Set whether to automatically answer an

Select the ring tone.

Set phonebook data to be automatically

Display a callers picture on an incoming

Cancel/Reset all customized items in the

Turn the text/e-mail message function o

Select a text or e-mail message account

Select whether a pop-up alert comes on

*1: Appears only when a phone is connected to HFL.

uuHFL Menusu B lu e to o th H

an d

sFreeLin k

a phone number to store as a speed dial number.

a phone number from the call history to store as a speed umber.

a phone number from the phonebook to store as a dial number.

l list.

l list.

18 ACURA RDX NAVI-31TX48500.book 295

Phone screen 1. Press the PHONE button. 2. Press the MENU button to display

the menu items.

Dial*1

Phonebook*1

Speed Dial*1

(Existing entry list)

More Speed Dials

Import from Call History

Enter a phone number to dial.

Display the paired phones phonebook.

EnterManual Input

Import from Phonebook

New Entry Select dial n

Select speed

Dial the selected number in the speed dia

Display another paired phones speed dia

*1: Appears only when a phone is connected to HFL.

295Continued

296

uuHFL Menusu

B lu e to o th H

an d

sFreeLin k

d/Stop)

vious

ext

ply

all

lect ount

sed calls.

ssistance service.

System reads received message aloud, or stop message from being read.

See the previous message.

See the next message.

Reply to a received message using one of six fixed phrases.

Make a call to the sender.

Select a mail or text message account.

18 ACURA RDX NAVI-31TX48500.book 296

*1: Appears only when a phone is connected to HFL. *2: Not available on all models *3: This function is not available if your phone is not supported.

Redial*1 Redial the last number dialed in the phones history.

Call History*1

Roadside Assistance*1, 2

Text/Email*1, 3

All

Dialed

Received

Missed

(Rea

Pre

N

Re

C

Se Acc

Display the last 20 outgoing, incoming and mis

Display the last 20 outgoing calls.

Display the last 20 incoming calls.

Display the last 20 missed calls.

Makes a call to the number for the Roadside A

Message is read aloud.

Select a message and press .

18 ACURA RDX NAVI-31TX48500.book 297

AcuraLink Messages

This section describes how Acura directly communicates important information to you

regarding your vehicle.

97

2

AcuraLink............................................. 298 In Case of Emergency........................... 298 Security Features .................................. 301 Operator Assistance ............................. 302 AcuraLink Message ............................ 303 AcuraLink Subscription Status............. 307

298

A cu

raLin k M

essag es

18 ACURA RDX NAVI-31TX48500.book 298

AcuraLink

1 AcuraLink

AcuraLink also provides services you can operate from the Internet or your smartphone.

To subscribe to AcuraLink, or to get more information about all of its features, contact an Acura dealer or visit owners.acura.com (U.S.) or www.acura.ca/owners/acuralink (Canada).

1 In Case of Emergency

You cannot operate other navigation- or phone- related functions using the screens while talking to the operator.

Only the operator can terminate the connection to your vehicle.

A subscription-based service that provides convenient features such as voice communication in case of emergency, online security, one-on-one operator assistance, and the transmission of important messages regarding your vehicles status. For information on traffic rerouting and traffic information updates, provided by the AcuraLink server.

In Case of Emergency Your vehicle may not be able to connect to the operator if the battery level is low, the line is disconnected or you do not have adequate mobile coverage.

You cannot use emergency services when: You travel outside the AcuraLink service coverage areas. There is a problem with the connecting devices, such as the ASSIST button,

microphone, speakers, or the unit itself. You are not subscribed to the service or your subscription is no longer valid.

uuAcuraLinku In Case of Emergency A

cu raLin

k M

essag es

1 Automatic Collision Notification

If the unit fails to connect to the operator, it repeatedly tries until it succeeds.

18 ACURA RDX NAVI-31TX48500.book 299

If your vehicles airbags deploy or if the unit detects that the vehicle is severely impacted, your vehicle automatically will attempt to connect to the AcuraLink operator. Once connected, information about your vehicle, its positioning, and its condition will be sent to the operator; you also can speak to the operator when connected.

Automatic Collision Notification Navigation screen

On Demand Multi-Use DisplayTM

Continued 299

uuAcuraLinku In Case of Emergency

300

A cu

raLin k M

essag es

1 Manual Operator Connection

Do not press the button while driving. When you need to contact the operator, park the vehicle in a safe place.

If the unit fails to connect to the operator, it automatically cancels the action after three minutes.

In an emergency, the cover can be broken through to press the ASSIST button.

18 ACURA RDX NAVI-31TX48500.book 300

If you need to talk to the AcuraLink operator in an emergency situation, you can manually connect to them by pressing the ASSIST button with the power mode in ACCESSORY or ON. 1. Open the cover attached to the

ceiling console. 2. Press the ASSIST button.

u You are connected to the AcuraLink operator.

Manual Operator Connection

ASSIST Button

uuAcuraLinkuSecurity Features A

cu raLin

k M

essag es

1 Security Features

The contact information of your provider, your user ID and PIN will be given when you subscribe to AcuraLink. If you forget any of the above, contact a dealer or visit owners.acura.com (U.S.) or www.acura.ca/owners/acuralink (Canada).

You can also activate the remote door lock/unlock and vehicle finder features from the Internet or using your smartphone app. Ask a dealer or visit owners.acura.com (U.S.) or www.acura.ca/owners/ acuralink (Canada).

1 Vehicle finder

The lights will stop flashing and horn will stop sounding under the following conditions: When 30 seconds have elapsed. You unlock the doors using the remote transmitter. You unlock the doors using the keyless access

system. You unlock the doors using the built-in key. The power mode is set to ACCESSORY or ON.

18 ACURA RDX NAVI-31TX48500.book 301

Security Features Your subscribed telematics service provider can track your vehicles location, remotely lock or unlock doors, and help you find your vehicle. To use these features, you need your user ID and personal identification number (PIN).

Stolen vehicle tracking This feature searches and tracks down your vehicle position even if it is on the move. If you believe that your vehicle has been stolen, contact the police as well as the provider.

Remote door lock/unlock The provider can remotely lock or unlock doors upon your request.

Vehicle finder This feature is convenient to use when trying to locate your vehicle in large areas, such as a crowded parking lot. If you cannot locate your vehicle after using the remote transmitters answerback function, you can contact the provider which can then flash your vehicles exterior lights and sound the horn.

Security alarm notification If the security system in your vehicle detects an abnormal condition, such as someone tampering with the lock on your vehicle, the provider notifies you by your preferred method.

301

302

uuAcuraLinkuOperator Assistance

A cu

raLin k M

essag es

1 Operator Assistance

Remain attentive to road conditions and driving during operator assistance.

18 ACURA RDX NAVI-31TX48500.book 302

Operator Assistance Connect to the AcuraLink operator when trying to find a destination or for roadside assistance.

1. Press the LINK button. u Connection to the operator

begins.

2. Talk to the operator. u To disconnect, rotate to

select Hang Up, select End Call on the On Demand Multi- Use DisplayTM, or press the

(Hang-Up/Back) button on the steering wheel.

LINK Button

uuAcuraLinkuAcuraLink Message A

cu raLin

k M

essag es

1 AcuraLink Message

Messages may not appear immediately after your vehicle purchase. It can take several days for your dealer to register your vehicles ID.

If an icon includes an exclamation point, it indicates that Acura gives high priority to this message compared to the one without. : An unread message with high priority : An unread message

1 Message Category

The types of messages you receive can be modified. Ask a dealer or visit owners.acura.com (U.S.) or www.acura.ca/owners/acuralink (Canada).

You can call your dealer, find the nearest dealer, or schedule appointments from the message options in Maintenance Minder, Recalls/Campaigns, and Diagnostic Info.

2 Message Options P. 305

18 ACURA RDX NAVI-31TX48500.book 303

AcuraLink Message

AcuraLink sends you messages on vehicle features, safety and emissions recall campaigns, maintenance reminders, and diagnostic information. When you receive a new message, an icon appears on the upper right corner of the navigation screen.

There are six message categories. Feature Guide: Messages about your vehicle and its features are sent daily for

the first 90 days. Quick Tips: Supplements your Owners Manual with updated vehicle

information. Scheduled Dealer Appointment: An appointment made through the Acura

server or Acura Owners website can be rescheduled or canceled from this option. 2 Dealer Appointments (U.S. only) P. 306

Diagnostic Info: Appears when a warning indicator or message comes on. Rotate to select Check Later or Check Now. u Selecting Check Now lets you know if you should see a dealer immediately or

later in accordance with the warning severity level. Maintenance Minder: Lets you know which maintenance item is due along

with a reminder message.

Message Icon

Message Category

303Continued

uuAcuraLinkuAcuraLink Message

304

A cu

raLin k M

essag es

1 Reading a Message

If there is no message listed on the menu, AcuraLink/Messages is grayed out and cannot be selected.

The message icon disappears once you read the message.

However, the exclamation mark that indicates that the message has a high priority remains. : A read message with high priority.

18 ACURA RDX NAVI-31TX48500.book 304

Recalls/Campaigns: Reminds you of a recall or important safety information. You should also be notified by mail.

1. Press the INFO button, rotate to select AcuraLink/Messages, then press . u If your display has changed

from Info menu to Current Drive, press the MENU button.

u Select AcuraLink messages. 2. Rotate to select a category,

then press . u If there are unread messages in

a category, a message icon appears next to that category.

3. Rotate to select a message you want to read, then press .

Reading a Message

uuAcuraLinkuAcuraLink Message A

cu raLin

k M

essag es

1 Message Options

The available options vary by message category.

You can delete all messages in a category at once.

18 ACURA RDX NAVI-31TX48500.book 305

While a message is displayed, you can use options to take immediate action to the message.

Available options are: Voice: Reads the message aloud. Select Stop to cancel it. Find Acura Dlr.: Searches for the nearest Acura dealer. Delete: Deletes the displayed message. Call Your Dealer: Calls your Acura dealer using HFL. Schedule Dealer Appointment (U.S. only): Automatically sets an appointment

date at your dealer. Phone number: Dials a number displayed in the message via HFL. Diagnostic Info: Updates the current diagnostic message by connecting to the

Acura server using HFL.

Message Options

Continued 305

uuAcuraLinkuAcuraLink Message

306

A cu

raLin k M

essag es

1 Dealer Appointments (U.S. only)

To set up an automated dealer appointment when a regular maintenance is due, visit the Acura Owners website at owners.acura.com (U.S.) or www.acura.ca/owners/acuralink (Canada) and set the required option. A reminder message will be sent as the date for the dealer appointment approaches. A reminder message will also be sent if you schedule an appointment online using the Schedule Service Appointment function.

If you are not satisfied with the proposed appointment date and time, call your dealer directly.

To cancel the scheduled appointment, select Cancel Appointment when a message is displayed.

18 ACURA RDX NAVI-31TX48500.book 306

You can confirm the scheduled appointment date when you receive a Maintenance Minder or Recalls/Campaigns message, or reschedule any existing appointments.

1. Select a Maintenance Minder, Recalls/Campaigns, or Scheduled Dealer Appointment message.

2. Rotate to select Scheduled Dealer Appointment or Reschedule Appointment (depending on the screen). Press

. u A suggested time and date are

displayed. 3. Rotate to select Confirm

Appointment. Press to accept the time and date.

4. Press to select OK.

Dealer Appointments (U.S. only)

uuAcuraLinkuAcuraLink Subscription Status A

cu raLin

k M

essag es

18 ACURA RDX NAVI-31TX48500.book 307

AcuraLink Subscription Status H SETTINGS button u Info Settings u AcuraLink Subscription Status

Confirm your AcuraLink subscription status.

Signal strength

Item Information

You can check the signal strength.

Current Contract The AcuraLink subscription number and subscription level is displayed.

Service You can confirm the type of service.

Subscription You can confirm the expiration date.

Status The following message can be displayed: Check Antenna: There is a problem with the AcuraLink

antenna. Contact a dealer. No data: The signal is received, but the system cannot receive

traffic data. OK: The system is receiving the signal or traffic data.

307

308

18 ACURA RDX NAVI-31TX48500.book 308

18 ACURA RDX NAVI-31TX48500.book 309

Other Features

This section describes the useful functions incorporated into the navigation system.

09

3

Trip Computer ....................................... 310 Calendar ................................................ 311 Information Functions .......................... 312

System Device Information ................... 312 Map Data Update ................................ 312 Info Screen Preference ......................... 313

Multi-View Rear Camera ...................... 314

310

O th

er Featu res

18 ACURA RDX NAVI-31TX48500.book 310

Trip Computer

1 Trip Computer

Displays the following trip information: Instant Fuel: The current estimated instant fuel

economy. Average Fuel: The average fuel economy since

the last key cycle. 1st, 2nd, 3rd Prev.: The previous average fuel

consumption. RANGE: The estimated distance you can travel on

the fuel remaining in the tank.

These values are estimates only.

H INFO button u Trip Computer

View the distance traveled and average fuel consumption. Move or to select the trip information.

The following items are available: Current Drive: Displays the current trip information. History of Trip A: Displays information for three previous histories. The

information is stored every time you reset Trip A. Delete History: Deletes the trip information. Move on the Trip A screen to

select Delete History, then press . You will receive a confirmation message on the screen. Rotate to select Yes, then press .

18 ACURA RDX NAVI-31TX48500.book 311

Calendar

O

th er Featu

res

H INFO button u Calendar

View the calendar screen. Move or to select the months of the year.

311

312

O th

er Featu res

18 ACURA RDX NAVI-31TX48500.book 312

Information Functions

1 System Device Information

You will need this information when ordering a map update.

2 Obtaining a Navigation Update P. 337

1 Map Data Update

This operation is only available during a database update.

2 Obtaining a Navigation Update P. 337

System Device Information H SETTINGS button u Navi Settings u Map u System Device Information

View database, software, device, and vehicle identification information.

Map Data Update H SETTINGS button u Navi Settings u Map u Map Data Update

Check the map data update status when updating the map database.

uuInformation Functionsu Info Screen Preference O

th er Featu

res

18 ACURA RDX NAVI-31TX48500.book 313

Info Screen Preference H SETTINGS button u Info Settings u Other u Info Screen Preference

Select the top menu when the INFO button is pressed. Rotate to select your desired setting item. Press .

The following options are available: Info Top: A brief menu pops up. Info Menu (factory default): A full menu pops up. Off: A menu does not pop up.

313

314

O th

er Featu res

18 ACURA RDX NAVI-31TX48500.book 314

Multi-View Rear Camera

1 Multi-View Rear Camera

Always keep the camera lens clean and unobstructed. The multi-view rear camera has a lens that makes distances appear different than they actually are. Always take care when reversing, and look behind you for obstacles.

Navigation controls are disabled when in Reverse.

Adjusting the brightness for the multi-view rear camera display does not affect the brightness for the navigation screen.

If you turn the guide lines off, they remain off until you turn them back on.

The last used viewing mode is selected the next time you shift into Reverse. However, once the power mode is set to VEHICLE OFF (LOCK), WIDE mode is selected if TOP DOWN view was last used.

You can change the Fixed Guideline and Dynamic Guideline settings.

2 Customized Features P. 88

Fixed Guideline On: Guidelines appear when you shift into . Off: Guidelines do not appear. Dynamic Guideline On: Guidelines move according to the steering wheel direction. Off: Guidelines do not move.

About Your Multi-View Rear Camera Your vehicle is equipped with a multi-view rear camera. When you shift into Reverse, the rear view is displayed on the audio/information screen. The edge of the bumper and parking guide lines are also displayed.

Rotate to adjust the screen brightness. While the rear view is displayed, press to switch between WIDE, NORMAL, and TOP DOWN view modes.Multi-View

Rear Camera

TOP DOWN

NORMAL

Guide lines Bumper

Camera

Approx. 9.8 ft (3 m)

Approx. 1.7 ft (50 cm) Tailgate open range

WIDEScreen display

Approx. 6.6 ft (2 m)

Approx. 3.3 ft (1 m)

Approx. 9.8 ft (3 m)

Approx. 6.6 ft (2 m)

Approx. 3.3 ft (1 m)

18 ACURA RDX NAVI-31TX48500.book 315

Troubleshooting

15

Troubleshooting ....................................316 Map, Voice, Entering Destinations.........316 Traffic ...................................................318 Guidance, Routing ................................319 Update, Coverage, Map Errors ..............321 Display, Accessories ..............................321 Multi-View Rear Camera .......................321 Miscellaneous Questions .......................322

Error Messages ......................................323 Navigation System ................................323 CD Player ..............................................324 Hard Disc Drive (HDD) Audio .................325 iPod/USB Flash Drive .............................326 Pandora ..............................................327

3

AhaTM Radio ......................................... 330

316

Tro u

b lesh

o o

tin g

18 ACURA RDX NAVI-31TX48500.book 316

Troubleshooting

ution

n screen reminds you and your guest system in a safe manner. The Startup

rtain period of time and the top screen of

peratures or shock from bumpy roads, and . If this happens frequently, please see a

es are lumped in with a major metro area. bdivisions, streets may be missing or only

rom the map.

r a place/landmark, the navigation system s are possible and grays out letters that do

avi Settings > Personal Info to display

stem Settings and check that Guidance

mpt to On.

HandsFreeLink or, if paired, your phone

Map, Voice, Entering Destinations

Problem Sol

The Startup Confirmation screen is displayed every time I start the car.

This is normal. The Startup Confirmatio drivers to always operate the navigation Confirmation screen goes off after a ce the last mode is displayed.

The navigation system reboots by itself (returns to the opening screen).

A reboot can be caused by extreme tem does not necessarily indicate a problem dealer.

How do I specify a destination when an entered city or street could not be found?

Try entering the street first. Some citi In rural unverified areas or new su partially numbered.

Try selecting the destination directly f 2 Map Input P. 138

Why do some letters become grayed out when I enter an address?

As you enter each letter in an address o looks in the database to see what letter not apply.

How do I delete Personal Addresses, Previous Destinations, or the Home Address?

1. Press the SETTINGS button. Select N the types of information.

2. Select the type of address to delete. 3. Select Delete.

I cannot hear the navigation system voice. 1. Press the SETTINGS button. Select Sy Volume is not set to 0.

2. Select Voice Reco and set Voice Pro

Why is Call grayed out on the Calculate Route screen?

Your phone is not paired to Bluetooth is in use.

2 Bluetooth HandsFreeLink P. 252

uuTroubleshootinguMap, Voice, Entering Destinations Tro

u b

lesh o

o tin

g

r onto the microphone on the ceiling, the re using the correct command when

up Confirmation screen.

rtain onscreen functions and features are moving. Use voice commands or pull over

-recorded voice, but street names are voice. Consequently, the name may be es.

brightness control is not set to maximum. avi Settings > Map > Color (Night).

i Settings > Map > Color (Day).

avi Settings > Personal Info > PIN Home PIN. e the choice to change or remove the PIN.

ution

18 ACURA RDX NAVI-31TX48500.book 317

The voice control system is having difficulty recognizing my voice commands.

Check that the vents are not blowing ai vehicle is as quiet as possible, and you a speaking.

2 Voice Recognition P. 23

I cannot give voice commands. Make sure you selected OK at the Start 2 Start-up P. 20

I cannot select an option using the Interface Dial.

To reduce potential driver distraction, ce limited or inoperable while the vehicle is to proceed.

The navigation system pronunciation of street names in the guidance command or destination address sounds strange.

The basic guidance phrases use a studio pronounced using a machine-generated mispronounced or sound strange at tim

The screen is bright when I drive at night. 1. Check that the nighttime dashboard 2. Press the SETTINGS button. Select N

2 Color P. 73

The screen is dark when I drive during the day.

Press the SETTINGS button. Select Nav 2 Color P. 73

How do I change or remove my PIN? 1. Press the SETTINGS button. Select N Number > Address Book PIN or Go

2. Enter your existing PIN. You then hav 2 PIN Numbers P. 47

I have forgotten my PIN. How do I reset the PIN for Home or the PIN for personal addresses?

A dealer must reset the PIN for you.

Problem Sol

317

318

uuTroubleshootinguTraffic

Tro u

b lesh

o o

tin g

Solution

dicator is available on the map screen. fficTM P. 14 e turned on. . 71 ption status.

hnical problem in your metropolitan area. Call if there is an outage. ontact Information P. 336 ur Acura dealer for assistance. Alaska, Hawaii, Puerto Rico, and Mexico.

n, the navigation system provides a detour route find a significantly faster route than the original

hich route should be faster based on freeway/ route. Use your own experience to determine uld be faster.

ect Navi Settings > Routing, and set Traffic

18 ACURA RDX NAVI-31TX48500.book 318

Traffic

Problem

AcuraLink Real-Time TrafficTM information could not be received or is not displayed properly.

Check that the traffic status in 2 AcuraLink Real-Time Tra

Check that the traffic icons ar 2 Showing Icons on Map P

Check the AcuraLink subscri 2 AcuraLink P. 298

There may be a temporary tec Acura Client Relations to see

2 Acura Client Relations C If the situation persists, see yo AcuraLink is not available in

The navigation system sometimes provides a detour route when I am driving a route on the freeway/ highway.

If Traffic Rerouting is set to O to your destination only if it can one.

2 Traffic Rerouting P. 58

The navigation system routes me to an exit and an alternate freeway/highway with unknown flow speeds or surface streets.

The navigation system predicts w highway congestion along your whether the alternate route wo

How can I ignore the detour route and return to the original route?

Press the SETTINGS button. Sel Rerouting to Off.

2 Traffic Rerouting P. 58

uuTroubleshootinguGuidance, Routing Tro

u b

lesh o

o tin

g

Solution

to generate the optimal route. You can change n calculating a route.

ct Navi Settings > Routing, and set Traffic

tly undergoing revision. You can access the most et.

ed from the GPS satellites are extremely weak and rfered as your vehicle travel near tall buildings or rroundings for anything that may be blocking the ntly and there is no obstruction that interfering r.

rified area.

ct Navi Settings > Map > View > North-up.

wer traffic, the navigation system updates the your actual road speed to give you a better

stem is unaware of the width of intersections. tion can indicate a temporary loss of the GPS

18 ACURA RDX NAVI-31TX48500.book 319

Guidance, Routing

Problem

The navigation system does not route me the same way I would go or the same way as other mapping systems.

The navigation system attempts the route preferences used whe

2 Route Preference P. 54

The navigation system wants to route me around potential traffic problems. How do I stop these pop- up messages?

Press the SETTINGS button. Sele Rerouting to Off.

2 Traffic Rerouting P. 58

The street Im on is not shown on the map screen. The mapping database is constan recent information on the intern

2 Map Coverage P. 337

The vehicle position icon is not following the road and the GPS icon text in the upper left hand corner of the screen is white or missing.

This is normal. The signals receiv can easily be interrupted or inte in tunnels. Check your vehicle su reception. If this happens freque the reception, please see a deale

2 GPS System P. 334

The blue highlighted route and voice guidance stopped or turned into a blue/pink line before I got to my destination.

Your route has entered an unve 2 Unverified Routing P. 56

How do I stop the map from rotating as I drive along?

Press the SETTINGS button. Sele

The time to destination display sometimes increases even though I am getting closer to my destination.

If your speed reduces due to slo time to destination based on estimate of arrival time.

The vehicle position icon on the map lags a short distance behind, especially when I arrive at an intersection.

This is normal. The navigation sy Large differences in vehicle posi signal.

2 GPS System P. 334

319

320

uuTroubleshootinguGuidance, Routing

Tro u

b lesh

o o

tin g

mbs. These are displayed if Display Tracking is

ct Navi Settings > Map, set Display Tracking to o remove the white dots from the map.

avoid, make sure to select sections of roads that .

vary 100 ft (30 m) due to GPS calculation

the GPS antenna can receive signals from at least hicle into an open area. The elevation is also not

tion is zero or below sea level.

Solution

18 ACURA RDX NAVI-31TX48500.book 320

The screen is showing white dots as I drive along. These dots are called breadcru set to On.

How do I remove the white dots (breadcrumbs) from my screen?

Press the SETTINGS button. Sele Off or select Delete Tracking t

2 Display Tracking P. 84

A road that I selected to avoid is being used when routing.

When you draw your area to include at least one intersection

2 Avoided Area P. 60

My elevation (shown when I display the current position) seems to fluctuate even though my elevation has not changed.

This is normal. The elevation can errors.

2 GPS System P. 334

My elevation is missing on the current position screen.

The elevation is only displayed if four satellites. Try moving the ve displayed if the calculated eleva

Problem

uuTroubleshootinguUpdate, Coverage, Map Errors Tro

u b

lesh o

o tin

g

Solution

tly undergoing revision. You can access the most et.

aps for the 50 U.S. states, Canada, Puerto Rico, em will not work in other countries.

in a large database. If you encounter major errors,

Solution

ecome brighter after a few minutes.

Solution

o or out of Reverse, you may experience a delay between the audio/information screen and the

ayed, rotate the Interface Dial to adjust the s not affect the navigation screen brightness

18 ACURA RDX NAVI-31TX48500.book 321

Update, Coverage, Map Errors

Display, Accessories

Multi-View Rear Camera

Problem

My city is not part of a fully verified detailed coverage area.

The mapping database is constan recent information on the intern

2 Map Coverage P. 337

Does the navigation system work outside North America?

The navigation system contains m and Mexico. The navigation syst

2 Map Coverage P. 337

How do I report errors I find in the database? Minor errors are bound to occur see your dealer.

2 Visiting Your Dealer P. 336

Problem

The display appears dim when starting the car in really cold weather.

This is normal. The display will b

Problem

When I shift gears, the rear camera image display is delayed.

This is normal. When shifting int while the screen image switches rear camera image.

The rear camera image is too dark or too bright. How do I adjust the brightness?

While the camera image is displ brightness. This adjustment doe settings.

321

322

uuTroubleshootinguMiscellaneous Questions

Tro u

b lesh

o o

tin g

Solution

press and hold the (Power) button for two tivate. If you have installed an aftermarket system,

18 ACURA RDX NAVI-31TX48500.book 322

Miscellaneous Questions

Problem

My battery was disconnected or went dead, and the navigation system is asking for a code.

Set the power mode to ON, and seconds. The system should reac contact a dealer.

18 ACURA RDX NAVI-31TX48500.book 323

Error Messages

Tro

u b

lesh o

o tin

g

Solution

en the display temperature is too high. The the display cools down. The system turns back on ools down.

ulty reading the HDD when the temperature is C). The navigation system starts up automatically

atmospheric pressure. Move your vehicle to the essure is high.

ulty reading the HDD when the temperature is ts up automatically when the system cools down.

failed with a cause other than low temperature, spheric pressure. After a short wait, try to operate t solve the problem, consult with the dealer.

Navigation System

Error Message

The display temperature is too high. For protection, the system will shut off until the display cools down.

This message appears briefly wh navigation system turns off until automatically when the display c

The navigation system temperature is too low. For protection, the system will shut off until the it warms up.

The navigation system has diffic below approximately -22F (-30 when the display warms up.

The navigation system atmospheric pressure is too low. For protection, the system will shut off until the pressure returns to safe levels.

The HDD is inoperable due to low place where the atmospheric pr

The navigation system temperature is too high. For protection, the system will shut off until it cools down.

The navigation system has diffic high. The navigation system star

HDD access error. Please consult your dealer. Writing of the data to the HDD high temperature, and low atmo the system again. If this does no

HDD access error. The system will reset and attempt to correct the problem.

323

324

uuError MessagesuCD Player

Tro u

b lesh

o o

tin g

Solution

ile will be skipped. The next supported track/file cally.

ject) button and remove the disc, and check that ge is cleared.

disc is not damaged or deformed, and insert the

g CDs P. 211

ssage reappears, press the (eject) button, and c. nt disc. plays, there is a problem with the first disc. ssage repeats, or the disc cannot be removed, r. rce the disc out of the player.

disc is not damaged or deformed. g CDs P. 211

system off and allow the player to cool down until ge is cleared.

18 ACURA RDX NAVI-31TX48500.book 324

CD Player If a disc error occurs, you may see the following error messages.

Error Message Cause

Unplayable File Track/file format not supported Current track/f plays automati

Bad Disc Please Check Owners Manual Push Eject

Mechanical error Press the (e the error messa

Mecha Error Check that the disc again.

2 Protectin

Bad Disc Please Check Owners Manual

Servo error If the error me pull out the dis

Insert a differe If the new disc

If the error me contact a deale Do not try to fo

Check Disc Disc error Check that the 2 Protectin

Heat Error High temperature Turn the audio the error messa

uuError MessagesuHard Disc Drive (HDD) Audio Tro

u b

lesh o

o tin

g

Cause

llow the player to cool down until the error

ulty reading the HDD when the temperature is C). The navigation system starts up automatically

upported. Current track will be skipped. The next ally.

18 ACURA RDX NAVI-31TX48500.book 325

Hard Disc Drive (HDD) Audio If an error occurs while playing the Hard Disc Drive (HDD) Audio, you may see the following error messages. If you cannot clear the error message, contact a dealer.

Error Message

HDD access error. Please consult your dealer.

The navigation system temperature is too high. For protection, the system will shut off until it cools down.

Turn the audio system off and a message is cleared.

The navigation system temperature is too low. For protection, the system will shut off until it warms up.

The navigation system has diffic below approximately -22F (-30 when the display warms up.

Unplayable File Appears when a file format not s supported track plays automatic

325

326

uuError Messagesu iPod/USB Flash Drive

Tro u

b lesh

o o

tin g

Cause

with the audio system. Check if the device is m.

device is connected. Disconnect the device. Then urn it on again. Do not reconnect the device that

iPod is connected. If it appears when a supported od software to the newer version. not acknowledge the iPod. Reconnect the iPod.

B flash drive are DRM or an unsupported format. bout 3 seconds, then plays the next song.

.

ve is empty or there are no MP3, WMA, or AAC

stored on the device.

device is connected. If it appears when a reconnect the device.

18 ACURA RDX NAVI-31TX48500.book 326

iPod/USB Flash Drive If an error occurs while playing an iPod or USB flash drive, you may see the following error messages. If you cannot clear the error message, contact a dealer.

Error Message

USB Error Appears when there is a problem compatible with the audio syste

Incompatible USB Device Please Check Owners Manual

Appears when an incompatible turn the audio system off, and t caused the error.

Unsupported Version Appears when an unsupported iPod is connected, update the iP Appears when the system does

Connect Retry

Unplayable File Appears when the files in the US This error message appears for a

No Data Appears when the iPod is empty

Appears when the USB flash dri files in the USB flash drive.

Check that compatible files are

Unsupported Appears when an unsupported supported device is connected,

iPod

USB flash drive

iPod and USB flash drive

uuError MessagesuPandora Tro

u b

lesh o

o tin

g

Solution

evice is Disconnect the device. Then turn the audio system off, and turn it again. Do not reconnect the device that caused the error.

list on Use the device to create a station.

song or ined

Try again later.

Try again later.

le with Reboot the app and reconnect the device.

is not Update Pandora to the latest version.

ver is in Try again later.

18 ACURA RDX NAVI-31TX48500.book 327

Pandora If an error occurs while playing Pandora, you may see the following error messages. If you cannot clear the error message, contact a dealer.

Error Message Cause

Incompatible USB Device Please Check Owners Manual

Appears when an incompatible d connected.

There is no station list in the device. Please add the station list to your device.

No stations have been created. Please create a station on the device.

Appears when there is no station the device.

Music licenses force us to limit the number of tracks you may skip each hour.

Appears when you try to skip a select Dislike over the predeterm number of times in an hour.

Unable to save rating. Unable to save bookmark.

Appears when the commanded operation is failed.

No data Appears when no data is availab Pandora activated.

Unsupported Appears when Pandora version supported.PANDORA App version is not supported.

PANDORA system maintenance Appears when the Pandora ser maintenance.

U.S. models

Navigation Screen

On Demand Multi-Use DisplayTM

327

328

uuError MessagesuPandora

Tro u

b lesh

o o

tin g

errors: ne is

creen on

r onds

lled in version

Turn the phone screen on, and make sure it is unlocked.

The Pandora version is not supported. Update to the latest version.

hone is ncher

Download the most recent version of the Pandora app.

. Download the HondaLink app from www.hondalink.com.

eated Delete the unneeded stations from the Station List.

a new Try again later.

Solution

18 ACURA RDX NAVI-31TX48500.book 328

Cannot connect to PANDORA. When stopped, check your mobile device.

The Pandora app failed to start because of the following device The display on your smartpho

turned off. Your smartphone is locked. The home screen or the app s

(music screen) is not displayed your smartphone.

The track is not played on you smartphone even after 30 sec have passed.

The Pandora app is not insta your device, or the Pandora is not supported.

When not driving, please see mobile device.

The Pandora app in your smartp not compatible with the app lau system.

The required app is not installed

The maximum number of stations that can be created is 100. To create more, please delete one or more previously created stations.

Appears when the number of cr stations reaches the limitation.

Unable to create new station. Please try again.

Appears when you try to create station.

Error Message Cause

uuError MessagesuPandora Tro

u b

lesh o

o tin

g

Try again later.

Try again later.

Log in to the PANDORA sever.

elected Select another station.

Solution

18 ACURA RDX NAVI-31TX48500.book 329

Unable to play PANDORA. Please try again later.

Appears when you try to play PANDORA.

Unable to play PANDORA. Music licensing restricts play in this area.

Unable to play PANDORA. When stopped, log-in to PANDORA.

This PANDORA station is currently not available. Please select another station.

Appears when the station you s is not currently available.

Error Message Cause

329

330

uuError MessagesuAhaTM Radio

Tro u

b lesh

o o

tin g

Cause

not activated. Check your device.

device is connected. Disconnect the device. Then urn it on again. Do not reconnect the device that

18 ACURA RDX NAVI-31TX48500.book 330

AhaTM Radio If an error occurs while playing AhaTM Radio, you may see the following error messages. If you cannot clear the error message, contact a dealer.

Error Message

Cannot connect to AcuraLink. When stopped, check your mobile device.

Appears when the AhaTM app is

Incompatible USB Device Please Check Owners Manual

Appears when an incompatible turn the audio system off, and t caused the error.

18 ACURA RDX NAVI-31TX48500.book 331

Reference Information

31

System Initialization ..............................332 Entering the Security Code....................332 Acquiring GPS Information....................332 Startup Confirmation Screen.................333 Map Matching ......................................333

System Limitations ................................334 GPS System...........................................334 Address Calculation ..............................334 Database ..............................................334

Client Assistance ....................................336 Resolving Problems ...............................336 Acura Client Relations Contact Information...336 Visiting Your Dealer ..............................336 Map Coverage ......................................337

3

Obtaining a Navigation Update ............ 337 Traffic Information ............................... 338 Operation in Alaska, Hawaii, Canada, Puerto Rico, and Mexico ...................................... 338

Legal Information ................................. 339 Copyrights ........................................... 339 User Agreements ................................. 339 As required by the FCC ........................ 344

332

R eferen

ce In fo

rm atio

n

18 ACURA RDX NAVI-31TX48500.book 332

System Initialization

The navigation system must be initialized if power to the navigation system is interrupted for any reason (e.g., the battery was disconnected).

Entering the Security Code In most cases, you do not need to enter a security code. Follow the steps to reactivate the system.

1. Set the power mode to ON, and turn on the audio system.

2. Press and hold the (Power) button for more than two seconds. u The system is reactivated when the

systems control unit recognizes that the system is in your vehicle. If the control unit fails to recognize, you must go to a dealer and have the system checked.

Acquiring GPS Information Depending on the length of time the power was interrupted, your system may require GPS initialization.

If initialization is not necessary, the system proceeds directly to the Startup Confirmation screen. If the system fails to locate a sufficient number of satellites to locate your position within 10 minutes, the following screen is displayed.

If you are experiencing GPS reception problems:

2 GPS System P. 334

uuSystem InitializationuStartup Confirmation Screen R

eferen ce In

fo rm

atio n

18 ACURA RDX NAVI-31TX48500.book 333

Startup Confirmation Screen The Startup Confirmation screen is displayed when initialization has successfully completed. It is displayed every time you start your vehicle. Press to select OK to continue.

Map Matching Map matching is the process of using the acquired GPS information to locate your position on the map screen. If you are on a mapped road, the name of the road is displayed along the bottom of the map screen when map matching is completed. Do not enter a destination until the road name is displayed. The system may initially show your location on a different street (e.g., in urban areas where streets are close together), may show an incorrect elevation, or may delay the display of the vehicle position icon at intersections. This is normal; the system will correct itself while you drive.

333

334

R eferen

ce In fo

rm atio

n

18 ACURA RDX NAVI-31TX48500.book 334

System Limitations

GPS System The signals received from the GPS satellites are extremely weak (less than a millionth of the strength of a local FM station) and require an unobstructed view of the sky. The GPS antenna is located in the roof. The signal reception can easily be interrupted or interfered with by trees, tall buildings, freeway/highway overpasses, tunnels, or overhead electrical power wires. The GPS is operated by the U.S. Department of Defense. For security reasons, there are certain inaccuracies built into the GPS for which the navigation system must constantly compensate. This can cause occasional positioning errors of up to several hundred feet or tens of meters.

Address Calculation The destination icon shows only the approximate location of a destination address. This occurs if the number of possible addresses is different from the number of actual addresses on a block. For example, the address 1425 on a 1400 block with 100 possible addresses (because it is followed by the 1500 block) will be shown a quarter of the way down the block by the system. If there are only 25 actual addresses on the block, the actual location of address 1425 would be at the end of the block.

Database The digitized map database reflects conditions as they existed at various points in time before production. Accordingly, your database may contain inaccurate or incomplete data or information due to the passage of time, road construction, changing conditions, or other causes. For example, some places/landmarks may be missing when you search the database because the name was misspelled, the place was improperly categorized, or a place/ landmark is not yet in the database. This is also true for police stations, hospitals, and other public institutions. Do not rely on the navigation system if you need law enforcement or hospital services. Always check with local information sources. In addition, the map database contains verified and unverified areas. Unverified streets may be missing from the map, in the wrong location, or have an incorrect name or address range. A message will warn you if your route includes unverified streets. Exercise additional caution when driving in unverified areas.

uuSystem LimitationsuDatabase R

eferen ce In

fo rm

atio n

18 ACURA RDX NAVI-31TX48500.book 335

The database does not include, analyze, process, consider, or reflect any of the following categories of information: Neighborhood quality or safety Population density Availability or proximity of law

enforcement Emergency, rescue, medical, or other

assistance Construction work, zones, or hazards Road and lane closures Legal restrictions (such as vehicular type,

weight, load, height, and speed restrictions)

Road slope or grade Bridge height, width, weight, or other

limits Traffic facilities safety Special events Pavement characteristics or conditions Every effort has been made to verify that the database is accurate. The number of inaccuracies you experience increases the longer you go without obtaining an updated map database.

2 Obtaining a Navigation Update P. 337

We assume no liability for any incident that may result from an error in the program, or from changed conditions not noted above.

335

336

R eferen

ce In fo

rm atio

n

18 ACURA RDX NAVI-31TX48500.book 336

Client Assistance

Resolving Problems If you run into a specific issue that you cannot resolve, consult the following help resources: For navigation system issues:

2 Troubleshooting P. 316

There are also FAQs available online at www.acuranavi.com (U.S.) or www.acuranavi.ca (Canada).

For traffic-related issues: 2 Traffic P. 318

For reporting issues with the database or places/landmarks:

2 Visiting Your Dealer P. 336

Call Acura Client Relations. 2 Acura Client Relations Contact

Information P. 336

Acura Client Relations Contact Information Acura Navi American Honda Motor Co., Inc. Acura Client Relations Mail Stop 100-5E-8A 1919 Torrance Blvd. Torrance, CA 90501-2746 Telephone: (800) 382-2238

Honda Canada Inc. Acura Client Relations 180 Honda Boulevard Markham, L6C 0H9, ON E-Mail: acura_cr@ch.honda.com Telephone: (888) 9-ACURA-9 Hours: 8:00 am to 7:30 pm Monday to Friday (Eastern time)

Visiting Your Dealer If you have a question that you cannot resolve using the available help resources, you can consult a dealer. Please identify the specific issue (e.g., error occurs when you enter a specific address, when driving on a certain road, or just when its cold) so that the service technician can refer the issue to the factory so that a solution can be found. Be patient, the service technician may be unfamiliar with your specific issue.

uuClient AssistanceuMap Coverage R

eferen ce In

fo rm

atio n

18 ACURA RDX NAVI-31TX48500.book 337

Map Coverage The navigation system provides map coverage for the United States, Canada, Puerto Rico, and Mexico. The map coverage consists of accurately mapped (verified) metropolitan areas and a less accurate (unverified) rural database. Note that unverified areas are constantly being reviewed and converted to verified areas each year. This screen is an example.

Map coverage update information is available from Acura Client Relations or online at www.acuranavi.com (U.S.) or www.acuranavi.ca (Canada).

To find navigation system update information: 1. Visit the website. 2. Enter your vehicle model and model year. 3. Click Map Coverage to display a list of

verified coverage areas on the most recent update.

4. Click Map Coverage Details to display a PDF document with a full listing of all coverage areas. u Adobe Reader is required for

viewing and printing the Portable Document Format (PDF) documents. To download the latest version of Adobe Reader, visit http:// get.adobe.com/reader/.

Obtaining a Navigation Update Acura is continually expanding the scope of the navigation system. Navigation system software upgrades may be made available periodically, usually in the fall of each year. To purchase an update: 1. Obtain your vehicles VIN number and the

System/Device Information. 2 System Device Information P. 312

2. Call the Acura Navigation Disc Fulfillment Center at (888) 549-3798, or order online at www.acuranavi.com (U.S.) or www.acuranavi.ca (Canada).

An update is not available from a dealer. However, the dealer may assist you in obtaining one for you out of courtesy. There is no program for free updates.

337

338

uuClient AssistanceuTraffic Information

R eferen

ce In fo

rm atio

n

18 ACURA RDX NAVI-31TX48500.book 338

Traffic Information Continuously updated traffic information is available in major metropolitan areas across the 48 contiguous states and some cities in Canada. A list of coverage areas is available online. To find traffic information: 1. Visit www.acura.com/realtimetraffic. 2. Select Real-Time Traffic on the RDX. 3. Click AcuraLink Real-Time Traffic.

Operation in Alaska, Hawaii, Canada, Puerto Rico, and Mexico

All roads displayed on the map screens are verified roads. Information in this manual relating to unverified roads or areas is not applicable.

Entering a destination address or place/ landmark on another island may result in a screen caution message. This is because there are no ferry routes between islands in the database.

If Street Name Guidance is set to On, the street names will not be read out by voice guidance. This may change in a future data update.

Map Coverage

Address and Place Entry Screens

Puerto Rico and Mexico

18 ACURA RDX NAVI-31TX48500.book 339

Legal Information

R

eferen ce In

fo rm

atio n

Copyrights Infogroup-Data: Certain business data

provided by Infogroup 2011, All Rights Reserved.

EXIT-Data: ZENRIN CO., LTD. 2011. All rights reserved.

Building foot print: ZENRIN CO., LTD. 2011. All rights reserved.

Junction View Data: ZENRIN USA, INC. 2011. All rights reserved.

Brand icon: The marks of companies displayed by this product to indicate business locations are the marks of their respective owners. The use of such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product.

User Agreements

In using this HDD Satellite Linked Navigation System (the HDD), which includes HONDA MOTOR CO., LTD. software, ALPINE ELECTRONICS, INC. software, and Here database contents (hereinafter referred to as Licensors), you are bound by the terms and conditions set forth below. By using your copy of the HDD, you have expressed your Agreement to the terms and conditions of this Agreement. You should, therefore, make sure that you read and understand the following provisions. If for any reason you do not wish to be bound by the terms of this Agreement, please return the HDD to your dealer. The HDD may not be copied, duplicated,

or otherwise modified, in whole or in part, without the express written permission of the Licensors.

The HDD may not be transferred or sublicensed to any third party for profit, rent or loan, or licensed for reuse in any manner.

Navigation System User Agreement

The HDD may not be decompiled, reverse engineered or otherwise disassembled, in whole or in part.

The HDD may not be used in a network or by any other manner of simultaneous use in multiple systems.

The HDD is intended solely for personal use (or internal use where the end-user is a business) by the consumer. The HDD is not to be used for commercial purposes.

The Licensors do not guarantee to the client that the functions included in the HDD meet the specific objectives of the user.

Licensor shall not be responsible for any damages caused by the use of the HDD to the actual user or to any third party.

The warranty on the HDD shall not extend to an exchange or refund due to misspelling, omission of letters, or any other cosmetic discrepancy in the contents of the HDD.

The right to use the HDD shall expire either when the user destroys the HDD or software, or when any of the terms of this Agreement are violated and the Licensors exercise the option to revoke the license to use the HDD or software.

339Continued

340

uuLegal InformationuUser Agreements

R eferen

ce In fo

rm atio

n

18 ACURA RDX NAVI-31TX48500.book 340

The terms and conditions hereof apply to all subsequent users and owners as well as to the original purchaser.

The logos of oil companies, hotels, convenience stores, and other businesses are displayed for your information and convenience, and in no way imply any sponsorship, approval or endorsement of these companies, or their products. The logos are trademarks of their respective owners.

The marks of companies displayed by this product to indicate business locations are the marks of their respective owners.

The use of such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product.

The user shall indemnify and save harmless the Licensors, and their officers, employees and agents, from and against any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action, alleging loss, costs, expense, damages or injuries (including injuries resulting in death) arising out of the use or possession of the HDD or software. Use, duplication, or disclosure of this HDD by or on behalf of the United States

government is subject to Restricted Rights as set forth at FAR 52.227-14, -19 or DFARS 252.227-7013, as applicable. Manufacturers are the Licensors, including HONDA MOTOR CO., LTD., 2-1-1 Minami Aoyama Minato-Ku Tokyo 107-8556 JAPAN., Alpine Electronics, Inc., 20-1 Yoshima Kogyodanchi, Iwaki, Fukushima 970-1192 JAPAN., Here Corporation, 425 W Randolph St. Chicago, IL 60606, USA.

You have acquired a device (DEVICE) that includes software licensed by Alpine Electronics, Inc. (collectively ALPINE) from an affiliate of Microsoft Corporation (collectively MS). Those installed software products of MS origin, as well as associated media, printed materials, and online or electronic documentation (SOFTWARE) are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved. IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (EULA), DO NOT USE THE DEVICE OR COPY THE SOFTWARE INSTEAD, PROMPTLY CONTACT ALPINE

Navigation System END USER LICENSE AGREEMENT

FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT). GRANT OF SOFTWARE LICENSE

This EULA grants you the following license: You may use the SOFTWARE only on the DEVICE.

NOT FAULT TOLERANT THE SOFTWARE IS NOT FAULT TOLERANT. ALPINE HAS INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS HAS RELIED UPON ALPINE TO CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE SOFTWARE IS SUITABLE FOR SUCH USE.

NO WARRANTIES FOR THE SOFTWARE THE SOFTWARE is provided AS IS and with all faults. THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY, AND EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU. ALSO, THERE IS NO WARRANTY AGAINST INTERFERENCE WITH YOUR ENJOYMENT

uuLegal InformationuUser Agreements R

eferen ce In

fo rm

atio n

18 ACURA RDX NAVI-31TX48500.book 341

OF THE SOFTWARE OR AGAINST INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR SOFTWARE THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON, MS.

NO LIABILITY FOR CERTAIN DAMAGES. EXCEPT AS PROHIBITED BY LAW, MS, MICROSOFT CORPORATION AND THEIR AFFILIATES SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS, MICROSOFT CORPORATION AND/OR THEIR AFFILIATES BE LIABLE FOR ANY AMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S.$250.00).

SPEECH RECOGNITION If the SOFTWARE includes speech recognition component(s), you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process. Neither ALPINE nor its suppliers

shall be liable for any damages arising out of errors in the speech recognition process.

LIMITATIONS ON REVERSE ENGINEERING, DECOMPILATION, AND DISASSEMBLY You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.

ADDITIONAL SOFTWARE/SERVICES The SOFTWARE may permit ALPINE, MS, Microsoft Corporation or their affiliates to provide or make available to you SOFTWARE updates, supplements, add- on components, or Internet-base service components of the SOFTWARE after the date you obtain your initial copy of the SOFTWARE (Supplemental Components). u If ALPINE provides or makes available

to you Supplemental Components and no other EULA terms are provided along with the Supplemental Components, then the terms of this EULA shall apply.

u If MS, Microsoft Corporation or their affiliates make available Supplemental Components, and no other EULA terms are provided, then the terms of this EULA shall apply, except that MS, Microsoft Corporation or affiliate entity providing the Supplemental Component(s) shall be licensor of the Supplemental Component(s).

u ALPINE, MS, Microsoft Corporation and their affiliates reserve the right to discontinue any Internet-based services provided to you or made available to you through the use of the SOFTWARE.

RECOVERY MEDIA If SOFTWARE is provided by ALPINE on separate media and labeled Recovery Media you may use the Recovery Media solely to restore or reinstall the SOFTWARE originally installed on the DEVICE.

UPGRADES If the SOFTWARE is provided by ALPINE separate from the DEVICE on separate media or via web download or other means, and is labeled For Upgrade Purposes Only you may install one (1) copy of such SOFTWARE onto the

341Continued

342

uuLegal InformationuUser Agreements

R eferen

ce In fo

rm atio

n

18 ACURA RDX NAVI-31TX48500.book 342

DEVICE as a replacement copy for the existing SOFTWARE, and use it in accordance with this EULA, including any additional EULA terms accompanying the upgrade SOFTWARE.

TERMINATION Without prejudice to any other rights, ALPINE or MS may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE and all of its component parts.

INTELLECTUAL PROPERTY RIGHTS All title and intellectual property rights in and to the SOFTWARE (including but not limited to any images, photographs, animations, video, audio, music, text and applets, incorporated into the SOFTWARE), the accompanying printed materials, and any copies of the SOFTWARE, are owned by MS, Microsoft Corporation, their affiliates or suppliers. The SOFTWARE is licensed, not sold. You may not copy the printed materials accompanying the SOFTWARE. All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE is the

property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All rights not specifically granted under this EULA are reserved by MS, Microsoft Corporation, their affiliates and suppliers. Use of any on-line services which may be accessed through the SOFTWARE may be governed by the respective terms of use relating to such services. If this SOFTWARE contains documentation that is provided only in electronic form, you may print one copy of such electronic documentation.

TRADEMARKS This EULA does not grant you any rights in connection with any trademarks or service marks of ALPINE MS, Microsoft Corporation, their affiliates or suppliers.

PRODUCT SUPPORT Product support for the SOFTWARE is not provided by MS, its parent corporation Microsoft Corporation, or their affiliates or subsidiaries. For product support, please refer to ALPINE support number

provided in the documentation for the DEVICE. Should you have any questions concerning this EULA, or if you desire to contact ALPINE for any other reason, please refer to the address provided in the documentation for the DEVICE.

SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS You may permanently transfer rights under this EULA only as part of a permanent sale or transfer of the Device, and only if the recipient agrees to this EULA. If the SOFTWARE is an upgrade, any transfer must also include all prior versions of the SOFTWARE.

EXPORT RESTRICTIONS You acknowledge that SOFTWARE is of US-origin. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and country destination restrictions issued by U.S. and other governments. For additional information on exporting the SOFTWARE, see http:// www.microsoft.com/exporting/.

uuLegal InformationuUser Agreements R

eferen ce In

fo rm

atio n

18 ACURA RDX NAVI-31TX48500.book 343

Music recognition technology and related data are provided by Gracenote. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, visit www.gracenote.com. When music is recorded to the HDD from a CD, information such as the recording artist and track name are retrieved from the Gracenote Database and displayed (when available). Gracenote may not contain information for all albums. Gracenote is an internet-based music recognition service that allows artist, album, and track information from CDs to display on the HDD. Gracenote users are allowed 4 free updates a year. More information about Gracenote, its features, and downloads are available at www.honda.com (in U.S.) or www.honda.ca (in Canada).

Gracenote Music Recognition Service (CDDB)

CD and music-related data from Gracenote, Inc., copyright 2000 to present Gracenote. Gracenote Software, copyright 2000 to present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a non-exhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, MediaVOCS, the Gracenote logo and logotype, and the Powered by Gracenote logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries.

This application or device contains software from Gracenote, Inc. of Emeryville, California (Gracenote). The software from Gracenote (the Gracenote Software) enables this application to perform disc and/or file identification and obtain music- related information, including name, artist, track, and title information (Gracenote Data) from online servers or embedded databases (collectively, Gracenote Servers) and to perform other

Gracenote END USER LICENSE AGREEMENT

functions. You may use Gracenote Data only by means of the intended End-User functions or this application or device. You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal non- commercial use only. You agree not to assign, copy, transfer, or transmit the Gracenote Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN. You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide. You agree that Gracenote, Inc. may enforce

343Continued

344

uuLegal InformationuAs required by the FCC

R eferen

ce In fo

rm atio

n

18 ACURA RDX NAVI-31TX48500.book 344

its rights under this Agreement against you directly in its own name. The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service. The Gracenote Software and each item of Gracenote Data are licensed to you AS IS. Gracenote makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for any cause that Gracenote deems sufficient. No warranty is made that the Gracenote Software or Gracenote Servers are error- free or that functioning of Gracenote Software or Gracenote Servers will be uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in

the future and is free to discontinue its services at any time. GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NONINFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES. copyright 2000 to present Gracenote

As required by the FCC 1. This device complies with Part 15 of the

FCC Rules and Canadian RSS-210/ RSSGen. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2. The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the party responsible for compliance may void the users authority to operate the equipment.

3. This product emits radio frequency energy, but the radiated output power of this device is far below the FCC and IC radio frequency exposure limits. This equipment complies with FCC and IC RF radiation exposure limits set forth for an uncontrolled environment. Nevertheless, the device should be used in such a manner that the potential for human contact with the antenna during normal operation is minimized.

18 ACURA RDX NAVI-31TX48500.book 345

Voice Commands

45

3

Voice Commands .................................. 346 Voice Portal Screen .............................. 346 Navigation Commands......................... 347 Useful Commands................................ 348 Phone Commands................................ 348 Audio Commands ................................ 349 On Screen Commands ......................... 349 Music Search Commands ..................... 349 General Commands ............................. 350 Climate Control Commands................. 350 List of Categories ................................. 350

346

V o

ice C o

m m

an d

s

18 ACURA RDX NAVI-31TX48500.book 346

Voice Commands

Voice Portal Screen

When the (Talk) button is pressed, available voice commands appear on the screen. For a complete list of commands, say Voice Help after the beep or select Voice Help.

You can see the list of commands in Voice Info on the Info menu screen. Select Info, then select .

*1: U.S. models only

This can be only used when the phone is connected. When the system recognizes the Phone call command, the screen will change the dedicated screen for the voice recognition of the phone.

Call Call

This can be only used when the iPod or HDD device is connected.

Phone Call

Music Search

You can see a list of the available commands on the screen.

Navigation Commands Useful Commands Phone Commands Audio Commands On Screen Commands Music Search Commands General Commands Climate Control Commands All Commands Voice Settings Getting Started

The screen changes the navigation screen. Address (English only)*1

Place Name (English only)*1

Find Nearest POI Category Go Home Previous Destination Address Book Place Phone Number

Voice Help

Navigation

uuVoice CommandsuNavigation Commands V

o ice C

o m

m an

d s

18 ACURA RDX NAVI-31TX48500.book 347

When the system recognizes the Audio command, the screen will change the dedicated screen for the voice recognition of the audio.

Audio On*1

Audio Off*1

FM AM SXM Disc HDD USB iPod Bluetooth Audio Pandora*

Aha*

AUX 2 Audio Commands P. 349

The screen changes the climate control screen.

2 Climate Control Commands P. 350

*1: These commands toggle the function on and off, so the command may not match your intended action.

Audio

Climate Control

* Not available on all models

Navigation Commands The system accepts these commands on the dedicated screen for the voice recognition of the navigation.

What time is it? What is todays date? Voice help (displays commands for current screen)

Find nearest (specify place): Fuel and auto Acura dealers Honda dealers Gas station Hydrogen station Auto parts & electronics Auto repair & maintenance Car wash & detailing Motorcycle dealers Other car dealers Roadside assistance ATM and bank ATM Bank

General Commands

Find Place Commands

Check cashing Currency exchange Community Business City hall Civic center Convention center Court house Higher education Library Post office School Emergency room Hospital Police station Veterinarian Lodging Bed & breakfast Hotel Resort Recreation Amusement park Golf course Historical monument Marina Movie theater Museum Park

347Continued

348

uuVoice CommandsuUseful Commands

V o

ice C o

m m

an d

s

18 ACURA RDX NAVI-31TX48500.book 348

Performing arts Sports complex Tourist attraction Restaurant American restaurant Californian restaurant Chinese restaurant Coffee shop Continental restaurant Fast food French restaurant German restaurant Greek restaurant Indian restaurant Italian restaurant Japanese restaurant Korean restaurant Mexican restaurant Pizza Seafood restaurant Thai restaurant Vegetarian restaurant Vietnamese restaurant Other restaurant Shopping Accessory store Book store Clothing store

Grocery store Home improvement store Mall Office supply store Pharmacy Pet food store Sewing store Shoe store Sporting goods store Toy store Travel center Airport Automobile club Bus station Camping Commuter rail station Ferry terminal Named place Park & ride Parking garage Parking lot Rental car agency Rest area Ski area Tourist information Train station Travel agency Truck stop

Useful Commands The system accepts these commands on the voice portal top screen.

Call Call What time is it? What is today's date?

Phone Commands The system accepts these commands on the dedicated screen for the voice recognition of the phone.

Call Call

uuVoice CommandsuAudio Commands V

o ice C

o m

m an

d s

18 ACURA RDX NAVI-31TX48500.book 349

Audio Commands The system accepts these commands on the dedicated screen for the voice recognition of the audio.

Radio tune to <87.7-107.9> FM Radio FM preset <1-12>

Radio tune to <530-1710> AM Radio AM preset <1-6>

SXM channel <1-999> Radio SXM preset <1-12>

Disc play Disc play track <1-30>

HDD play HDD play track <1-30> Music Search What album is this?

Radio FM Commands

Radio AM Commands

Radio SXM Commands

Disc Commands

HDD Commands

* Not available on all models

What am I listening to?

iPod play iPod play track <1-30> Music Search What album is this? What am I listening to?

USB play USB play track <1-30>

Bluetooth audio play NOTE: Bluetooth Audio commands may not work on some phones or Bluetooth Audio devices.

Pandora play

Aha radio play

iPod Commands

USB Commands

Bluetooth Audio Commands

Pandora Commands*

Aha Commands*

AUX play

On Screen Commands The system accepts the voice command operation of the voice recognition screen.

Music Search Commands The system accepts these commands on the Music Search screen.

Song By VoiceTM is a feature that allows you to select music from your iPod or HDD device using Voice Commands. To activate this mode, you must push the talk switch and say: Music search.

Music search What am I listening to? Who am I listening to? Who is this? What's playing? Who's playing?

AUX Commands

Using Song By Voice

Song By Voice Commands

349Continued

350

uuVoice CommandsuGeneral Commands

V o

ice C o

m m

an d

s

18 ACURA RDX NAVI-31TX48500.book 350

What album is this?

Play artist Play album Play song Play composer Play genre Play playlist

List artist List album List composer List genre List playlist

General Commands What time is it? What is today's date?

Play Commands

List Commands

Climate Control Commands The system accepts these commands on the Climate control screen.

Climate Control Automatic Climate Control On*1

Climate Control Off*1

Air conditioner On*1

Air conditioner Off*1

Defrost On*1

Defrost Off*1

Vent Dash and Floor Floor Vents Floor and Defrost Fan Speed Up Fan Speed Down Fan Speed <1-7> Temperature Up Temperature Down Temperature Max Heat Temperature Max Cool Temperature <57-87> Degrees (U.S.) Temperature <18-32> Degrees (Canada)

*1: These commands toggle the function on and off, so the command may not match your intended action.

List of Categories The system accepts these commands (POI category name) on the dedicated screen.

Fuel/Auto ATM/Bank Community Emergency Lodging Recreation Restaurant Shopping Travel

Index

18 ACURA RDX NAVI-31TX48500.book 351

Index

In d

ex

Symbols a (Display Mode) Button ..................... 74 J (Hang-Up/Back) Button ....... 6, 22, 252 h (Pick-Up) Button ................................. 252 d (Talk) Button ............................ 6, 22, 252

Numbers 3D Angle Adjustment ................................ 77

A Acura Client Relations ............................. 336 AcuraLink Message .................................. 303 AcuraLink Subscription Status................. 307 AcuraLink................................................ 298 Address ..................................................... 118

Address Book............................................ 39 Avoided Area............................................ 60

Address Book Editing Address Book ................................ 39 Setting Destination ................................. 125

Address Book PIN ....................................... 47 AhaTM Radio.............................................. 330 AhaTM Radio Menu................................... 239 Audio

On Demand Multi-Use DisplayTM ................. 5 Remote Control ...................................... 179 Settings .................................................. 181 Voice Commands List.............................. 349

Audio Menu Bluetooth Audio .................................... 247 Disc ......................................................... 205 FM/AM Radio .......................................... 184 HDD ........................................................ 212 Internet Radio.......................................... 236 iPod......................................................... 224 SiriusXM Radio ...................................... 190 USB Flash drive ........................................ 241

Audio System Theft Protection....................................... 176 USB Port .................................................. 175

Auto Door Locking/Unlocking Customize ............................................... 102

AUX Auxiliary Input Jack .................................. 176

Avoid Streets............................................. 167 Avoided Area .............................................. 60

B Black Level .................................................. 26 Bluetooth Audio

Playing .................................................... 247 Bluetooth HandsFreeLink ..................... 252

Importing Phonebook Data...................... 261 Making a Call .......................................... 278 Pairing a Phone ....................................... 255 Phone Settings ........................................ 273 Receiving a Call ....................................... 283 Setting Up Speed Dialing ......................... 262

Brightness ................................................... 26

C Calculating the Route .............................. 141 Calendar.................................................... 311 Call History................................................ 282 Cancel Route............................................. 160 Category

Address Book............................................ 39 Setting Destination.................................. 127

Category History......................................... 49 Change Province....................................... 119 Change State ............................................ 119 Changing Your Destination..................... 168 Changing Your Route .............................. 159 City ............................................................ 121 Client Assistance....................................... 336 Clock Adjustment ....................................... 28 Color............................................................ 73 Continue Trip............................................ 171 Contrast ...................................................... 26 Coordinate................................................ 140 Correct Vehicle Position............................. 86 Current Location ........................................ 79 Current Position

Address Book............................................ 39 Map Input ............................................... 138

Customized Features.................................. 88

351

352

In d

ex

18 ACURA RDX NAVI-31TX48500.book 352

D Data Reset ................................................. 113 Day Mode

Color ......................................................... 73 Switching Display Mode............................. 74

Delete Tracking........................................... 85 Destination List

Adding Waypoint .................................... 161 Editing..................................................... 165

Detour ....................................................... 167 Dial ............................................................ 280 Directions .................................................. 154 Disc

Playing..................................................... 205 Display Settings........................................... 26 Display Tracking.......................................... 84

Driving..................................................... 148 Download POI

Editing Category........................................ 51 Importing Category ................................... 50 Setting Destination .................................. 135

Driving to Your Destination..................... 144

E Edit Go Home.............................................. 46 Edit POI Search Radius Along Route ......... 59 ENTER Button................................................ 7 Entering a Destination ............................. 116 Error Messages.......................................... 323

AhaTM Radio............................................. 330 CD Player................................................. 324

Hard Disc Drive (HDD) Audio ................... 325 iPod/USB Flash Drive................................ 326 Navigation System................................... 323 Pandora................................................. 327

Estimated Time........................................... 68 Exit Info..................................................... 155

F Find Nearest Place .................................... 168 FM/AM Radio

Playing .................................................... 184 Preset Memory ........................................ 187

Folder List Disc......................................................... 209 USB Flash Drive ....................................... 246

G Go Home..................................................... 11 Go Home PIN .............................................. 47 Gracenote Info. Update ........................... 222 Guidance (Navi Settings)............................ 62 Guidance Mode .......................................... 63 Guidance Point ........................................... 67

H HDD

Playing .................................................... 212 Hide Traffic Flow ...................................... 153 Home Address ...................................... 11, 46

House Number ......................................... 124

I Import Phonebook Data.......................... 261 Interface Dial................................................ 7 Interface Settings ....................................... 26 Intersection .............................................. 137 iPod

Connecting, Disconnecting ..................... 224 Playing.................................................... 224

L Language Settings ..................................... 34 Legal Information .................................... 339 Lodging (Place Category) ........................ 127

M Map (Navi Settings) ................................... 69 Map Data Update

Checking Version.................................... 312 Obtaining Update Data ........................... 337

Map Input Avoided Area............................................ 60 Setting Destination ................................. 138

Map Legend ........................................... 9, 80 Map Menu ................................................ 151 Map Screen............................................... 144

Changing View ......................................... 76 Icon ...................................................... 9, 82

In d

ex

18 ACURA RDX NAVI-31TX48500.book 353

Scale......................................................... 81 MENU Button

Changing Route...................................... 159 Entering a Destination............................. 116

Microphone .............................................. 252 MODE Button ........................................... 179 Multi-View Rear Camera ......................... 314 Music Search

HDD ....................................................... 217 How to Select a File from the Music Search List (MP3/WMA/AAC).................................. 209

iPod ........................................................ 230 Song By Voice......................................... 232 USB ........................................................ 246

N NAV Button .......................................... 10, 63 Navigation Menu (Destination) .............. 116 Navigation Menu (Route Option) ........... 159 Night Mode

Color ........................................................ 73 Switching Display Mode............................ 74

Non-map Screens ....................................... 66

O On Demand Multi-Use DisplayTM

Basic Operation........................................... 5 Customizing Audio Source...................... 178 Screen Settings ......................................... 87 Shortcuts .................................. 44, 177, 265 Sound..................................................... 183

P Pairing a Phone ........................................ 255 Pandora ................................................... 237 Personal Information ................................. 38 PHONE Button .......................................... 252 Phone Settings .......................................... 273 Phonebook

Importing ................................................ 261 Making a Call .......................................... 279

PIN Numbers ............................................... 47 Place Category

Address Book ............................................ 39 Setting Destination .................................. 127

Place Name Address Book ............................................ 39 Setting Destination .................................. 131

Place Phone Number Address Book ............................................ 39 Setting Destination .................................. 134

Postal Code ............................................... 120 Previous Destinations

Address Book ............................................ 39 Deleting .................................................... 48 Setting Destination .................................. 126

R Radio

FM/AM.................................................... 184 SiriusXM ................................................ 190

Random Disc ......................................................... 207

HDD........................................................ 215 USB Flash Drive ....................................... 244

Rearview Camera ..................................... 314 Repeat

Disc......................................................... 207 HDD........................................................ 215 iPod ........................................................ 228 USB Flash Drive ....................................... 244

Resuming Your Trip ................................. 171 Roadside Assistance ................................. 292 Route Preference........................................ 54 Routing ....................................................... 53

S Scan

Disc......................................................... 207 FM/AM Radio .................................. 188, 189 HDD........................................................ 215 SiriusXM Radio ...................................... 200 USB Flash Drive ....................................... 244

Scenic Route ............................................. 136 Schedule

Calendar ................................................. 311 Search Along ............................................ 162 Search Around.......................................... 162 Search by Name........................................ 128 Search by name

Place Category ........................................ 127 Search Nearby........................................... 168 Security PIN Code ..................................... 332 SETTINGS Button .......................................... 4 Show Icon on Map ..................................... 71

353

354

In d

ex

18 ACURA RDX NAVI-31TX48500.book 354

Siri Eyes Free ............................................... 25 SiriusXM Radio

Playing..................................................... 190 Preset Memory ........................................ 193 Replay Function ....................................... 194 Settings ................................................... 181 SportsFlashTM Alert................................... 196

Song By VoiceTM

Searching Music ...................................... 232 Setting..................................................... 231

Sort by Distance to Travel ........................ 127 Sound and Beep Settings ........................... 27 Sound Setup.............................................. 183 Speed Dial

Making a Call .......................................... 282 Registering .............................................. 263

Start-up ....................................................... 20 Steering Wheel Controls .......................... 179 Straight Line Guide..................................... 78 Street ......................................................... 122 Street Name Guidance ............................... 65 System Device Information ...................... 312 System Initialization ................................. 332 System Limitations.................................... 334

T Text/E-mail Message ................................. 285 Traffic Incidents ........................................ 157 Traffic List.................................................. 157 Traffic Rerouting ...................................... 156

Auto Reroute........................................... 156

Navi Settings ............................................. 58 Trip Computer .......................................... 310 Troubleshooting ................................. 16, 316

U Unit Settings ............................................... 33 Unverified Routing..................................... 56 Update System Software

Obtaining Update Data ........................... 337 USB Flash Drive

Connecting, Disconnecting...................... 241 Playing .................................................... 241 Voice Commands List ...................... 349, 350

USB Port .................................................... 175

V View (Navi Settings) ................................... 76 View Routes.............................................. 143 Viewing the Routes .................................. 143 Voice

Map Menu .............................................. 149 Voice Commands

Help .......................................................... 15 Voice Commands List .............................. 346 Voice Control System ................................ 22

Voice Control Operation Basic Operation ........................................... 6 Voice Portal................................................. 6

Voice Recognition Settings ........................ 24

Voice Tag Phonebook Phonetic Modification........... 268 Registering a Voice Tag to a Speed Dial Entry ..................................................... 263

Volume HFL Buttons ............................................ 252 Map Menu.............................................. 151 Sound and Beep Settings .......................... 27 Voice Recognition Settings........................ 24

W Wallpaper Settings .................................... 30 Waypoint

Adding ................................................... 161 Editing .................................................... 165

Z Zip Code ................................................... 120

18 ACURA RDX NAVI-31TX48500.book 355

18 ACURA RDX NAVI-31TX48500.book 356

<

Manualsnet FAQs

If you want to find out how the RDX Acura works, you can view and download the Acura RDX 2018 SUV Navigation Manual on the Manualsnet website.

Yes, we have the Navigation Manual for Acura RDX as well as other Acura manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Navigation Manual should include all the details that are needed to use a Acura RDX. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Acura RDX 2018 SUV Navigation Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Acura RDX 2018 SUV Navigation Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Acura RDX 2018 SUV Navigation Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Acura RDX 2018 SUV Navigation Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Acura RDX 2018 SUV Navigation Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.