Acura RDX Navigation 2016 SUV Instruction Manual PDF

1 of 7
1 of 7

Summary of Content for Acura RDX Navigation 2016 SUV Instruction Manual PDF

NAVIGATION

Learn how to enter a destination and operate the navigation system.

Basic Navigation Operation A real-time navigation system uses GPS and a map database to show your current location and help guide you to a desired destination. You can operate the system using voice commands or the system controls.

To reduce the potential for driver distraction, certain manual functions may be inoperable or grayed out while the vehicle is moving. Voice commands are always available.

Steering Wheel Controls

Use the steering wheel controls to give voice commands.

Talk button: Press to give navigation commands.

Back button: Press to cancel a command or operation.

Talk Button Tips

For a full list of navigation voice commands, see page 147.

When using the Talk button, wait for a beep before saying a command.

To bypass the system prompts, simply press the Talk button again to say your command.

When the Talk button is pressed, all available voice commands are highlighted in yellow.

Speak in a clear, natural voice.

Reduce all background noise.

Adjust the dashboard and side vents away from the microphone in the ceiling.

Close the windows and moonroof.

WARNING Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed. Only operate system controls when the conditions permit you to safely do so.

NAVIGATION*

Talk button

Back button

*ifequipped

NAVIGATION

Navigation Display and Controls

Use the controls to enter information and make selections. Some manual functions are inoperable while driving.

AUDIONAV

NAV button: Display the map screen or directions when en route.

INFO button: Select items such as traffic incidents and AcuraLink messages.

BACK button: Return to the previous display.

SETTINGS button: Change Navi settings.

MENU button: Enter destination information.

button: Change upper screen brightness. Use the interface dial to make adjustments.

Interface dial (from the map screen): Rotate to zoom in or out of the map. Press to display the map menu. Rotate and press to select items.

GPS signal strength

Traffic incident icon*

Traffic status*

Traffic flow*

Current map scale

Current vehicle position

Map orientation

Current street

Landmark icon

*subscriptionfeature

NAVIGATION

Interface Dial Feedback

Configure the system to read aloud selections made using the interface dial. Use the interface dial to make and enter selections.

1. Press SETTINGS.

2. Select System Settings.

3. Select Interface Dial Feedback.

4. Select Off, Auto, or On. On: Always reads the selection. Auto: Reads the selection only when the vehicle is moving. Off: Turns interface dial feedback off.

System Guidance Volume

Adjust the navigation system guidance volume. Use the interface dial to make and enter selections. You can also adjust the volume during guidance using the volume knob or steering wheel controls.

1. From the map screen, press the interface dial to display the map menu.

2. Select Guidance Volume.

3. Adjust the volume to your preferred level.

4. Press BACK to exit the menu.

Voice Prompt

Turn the voice prompt feature on or off. Use the interface dial to make and enter selections.

1. Press SETTINGS.

2. Select System Settings.

3. Select Voice Prompt.

4. Select Off or On. On: Provides voice prompts. Off: Voice prompts are disabled.

NAVIGATION

Entering a Destination Use several methods to enter a destination.

Home Address

Store your home address in the system so you can easily route to it. Use the interface dial to make and enter selections.

1. Press SETTINGS.

2. Select Navi Settings.

3. Select Edit Go Home.

4. Enter the address and select OK.

When your home address is stored, you can press the Talk button and say Go home at any time. You can also select Go Home from the destination menu.

Street Address

Enter a street address using voice commands. Press the Talk button before saying each command.

You can also enter the address manually when the vehicle is stopped. While on the map screen, press MENU and use the interface dial to select Address. Follow the prompts.

U.S. models

1. From the Voice Portal screen, say Address.

2. The system prompts you to say the entire address. For example, say 1-2-3-4MainStreet,Los Angeles,California.

3. The system interprets the address by state, city, street, and address number. If necessary, you may have to clarify similar matches.

4. Say Setasdestination to set the route.

Canadian models

From the map screen, say DisplayMenu, followed by Address. Follow the prompts.

NAVIGATION

Place Name

Enter a place name stored in the navigation database using voice commands. Press the Talk button before saying each command.

1. From the Voice Portal, say Placename.

2. Say a category. For example, ATM/Bank.

3. Say the name of the point of interest. For example, ABCBank.

4. The system interprets the name. If necessary, you may have to clarify similar matches.

If there is more than one point of interest with the name, a list of matches appears in order of closest distance. Say the number next to the place you want.

5. Say Setasdestination to set the route.

If the system does not recognize the specific name, you can enter it manually when the vehicle is stopped. While on the map screen, press MENU and use the interface dial to select Place Name. Enter the name one letter at a time, and follow the prompts.

Find Nearest Place

Enter a destination by category and distance using voice commands. Press the Talk button before saying each command.

1. Say Findnearestand a place. For example, FindnearestATM.

2. A list of the nearest places in your area is displayed by shortest distance to destination.

3. Say the number next to the destination you want to select.

4. SaySetasdestinationto set the route.

ODMD Shortcuts

You can add up to six destinations to the Shortcuts (Places tab) in the ODMD. The addresses must be previously stored in the navigation system address book.

1. Select Shortcuts.

2. Select Places.

3. Select No Entry to store a previously stored address book entry, or select a stored entry to route to it.

NAVIGATION

Routing After a destination is set, you can alter or cancel your route.

Map Legend

During route guidance

Next guidance pointEstimated

time to destination

Distance to destination

Destination

Calculated route

Distance to next maneuver

Turn-by-turn directions Shows a more detailed view of the next maneuver on the multi-information display. Use the Info (p/q) buttons on the steering wheel to bypass the display.

Upcoming maneuver

Current route

NAVIGATION

Taking a Detour

You can calculate a detour route manually if you encounter a road closure or other obstacle. Use the interface dial to make and enter selections.

1. When en route, press MENU.

2. Select Detour. The system attempts to calculate a new route by avoiding the next 5 miles (8 km) while on a freeway or 1 mile (1 km) while on a surface street.

AcuraLink Real-Time Traffic

Viewtrafficf ow,incidents,andconstructioninmajormetroareasifyou havean active AcuraLink subscription. You can also route around congestion or incidents using voice commands. Press the Talk button before saying each command.

1. When en route, say Displaytrafficonmyroute. A list of incidents on your route appears.

2. Say the number of the incident you want to avoid.

3. Say Avoid and the incident list returns.

4. Say Reroute to set the new route.

Canceling Your Route

You can cancel your route at any time. Press the Talk button and say Cancel route. You can also use the interface dial to make and enter selections.

1. When en route, press MENU.

2. Select Cancel Route. The route is cleared and the map screen returns.<

Manualsnet FAQs

If you want to find out how the Navigation Acura works, you can view and download the Acura RDX Navigation 2016 SUV Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Acura Navigation as well as other Acura manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Acura Navigation. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Acura RDX Navigation 2016 SUV Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Acura RDX Navigation 2016 SUV Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Acura RDX Navigation 2016 SUV Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Acura RDX Navigation 2016 SUV Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Acura RDX Navigation 2016 SUV Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.