Acura RDX HomeLink 2022 SUV Instruction Manual PDF

1 of 3
1 of 3

Summary of Content for Acura RDX HomeLink 2022 SUV Instruction Manual PDF

Featu res

HomeLink Universal Transceiver

The HomeLink Universal Transceiver can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems.

Refer to the safety information that came with your garage door opener to test that the safety features are functioning properly. If you do not have the safety information, contact the manufacturer.

Before programming HomeLink, make sure that people and objects are out of the way of the garage or gate to prevent potential injury or damage.

When programming a garage door opener, park just outside the garage doors path.

Important Safety Precautions

1HomeLink Universal Transceiver

Before programming HomeLink to operate a garage door opener, confirm that the opener has an external entrapment protection system, such as an electronic eye, or other safety and reverse stop features. If it does not, HomeLink may not be able to operate it.

NOTE: Some LED lightbulbs installed in the garage door opener can interfere with the training and consistent operation of your HomeLink device. Please consider use of Low RF interference bulbs in your garage door opener.

22 ACURA RDX-31TJB6300.book 386

uuHomeLink Universal TransceiveruTraining HomeLink Featu

res

Training HomeLink If it is necessary to erase a previously entered learned code: Press and hold the I and III HomeLink

buttons for about 10 seconds, until the green indicator blinks. Release the buttons, and proceed to step 1.

If you are training the second or third button, go directly to step 1.

The instructions on the next page should work for most gate or garage openers, but may not work for all. For detailed instructions about your specific remote opener, visit http://www.homelink.com or call (800) 355-3515.

III HomeLink Button

Indicator I HomeLink Button

22 ACURA RDX-31TJB6300.book 387

uuHomeLink Universal TransceiveruTraining HomeLink

Featu res

Programming a Button 1Training HomeLink

Reprogramming a Button If you want to retrain a programmed button for a new device, you do not have to erase all button memory. You can replace the existing memory code using this procedure:

Erasing Button Memory To erase programming from the buttons, press and hold the two outside HomeLink buttons until the HomeLink indicator changes from orange to rapidly flashing green. This should take about 10 seconds. You should erase all programming before selling the vehicle.

Operating To operate, simply press and release the programmed HomeLink button. Activation will now occur for the trained device.

Questions For questions or comments, visit www.HomeLink.com, www.youtube.com/ HomeLinkGentex, or by calling the HomeLink Hotline (North America only) at (800) 355-3515.

HomeLink is a registered trademark of Gentex Corporation.

2.

1. Press and hold the desired HomeLink button until the HomeLink indicator begins to slowly flash orange. This should take about 20 seconds.

Release the HomeLink button and position the remote transmitter you wish to link 1 - 3 inches (3 - 8 cm) from the HomeLink button you want to program, then follow steps 3 - 6 under programming a button.

Training Complete HomeLink LED is

continuously on green.

YES

YES

1. Position the remote transmitter you wish to link 1 to 3 inches (3 - 8 cm) from the HomeLink button you want to program.

3b. Canadian Garage Door Opener A. Press and release the HomeLink button. Press, hold and release the button on the remote every 2 secs. Does the HomeLink indicator (LED) change from slowly flashing orange to rapidly flashing or continuously on green? The process should take less than 60 seconds.

NO

2. Press and hold the desired HomeLink button. Is the HomeLink indicator (LED) slowly flashing orange?

NO

3a. Hold the button on the remote transmitter. Does HomeLink indicator (LED) change from slowly flashing orange to rapidly flashing green or continuously on green? The process should take less than 60 seconds.

5. Press and hold the HomeLink button again.

HomeLink indicator rapidly flashes green.

5a. The remote has a rolling code. Press the learn button on the remote-controlled device (e.g. garage door opener).

6. Press and hold the HomeLink button again. The remote-controlled device should operate.

Training Complete 5b. Within 30 secs, press and hold the

programmed HomeLink button for 2 secs.

4. Press and hold the programmed HomeLink button for about a second. Does the dev

Manualsnet FAQs

If you want to find out how the HomeLink Acura works, you can view and download the Acura RDX HomeLink 2022 SUV Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Acura HomeLink as well as other Acura manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Acura HomeLink. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Acura RDX HomeLink 2022 SUV Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Acura RDX HomeLink 2022 SUV Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Acura RDX HomeLink 2022 SUV Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Acura RDX HomeLink 2022 SUV Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Acura RDX HomeLink 2022 SUV Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.