Acura ILX 2021 Sedan Navigation Manual PDF
Summary of Content for Acura ILX 2021 Sedan Navigation Manual PDF
2021 ILX
Navigation Manual
The information and specifications included in this publication were in effect at the time of approval for printing. Honda Motor Co., Ltd., reserves the right, however, to discontinue or change specifications or design at any time without notice and without incurring any obligation.
Accessories Precautions
The GPS antenna is located in the dashboard. Metallic front or side window tinting can seriously degrade or obstruct GPS reception.
Signal noise from devices such as radar detectors, vehicle tracking devices, remote starters, and additional amplifiers can disrupt the navigation system. If you install any such item, install it away from the navigation display and antenna.
Important Safety Information
Avoid focusing on the screen or manually operating the system controls while driving.
Enter information before you begin driving or when stopped. As you drive, listen to the audible instructions and use voice commands when possible. Pull to the side of the road if you need more time to look at the screen or operate the controls.
Route guidance may conflict with street closures, road construction, detours, and out-of-date map data.
The system itself may also have limitations. Verify route information by carefully observing roads, signs, and signals. Always use your own judgment and obey traffic laws.
2 System Limitations P. 152
NOTICE This vehicles navigation system display, if so equipped, includes mercury-containing components. Upon removal, please reuse, recycle, or dispose of as hazardous waste. Clean the screen with a soft, damp cloth. You may use a mild cleaner intended for use on the information screen and the On Demand Multi-Use DisplayTM.
3 WARNING Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed.
Only operate system controls when the conditions permit you to safely do so.
19 ACURA ILX NAVI-31TX68600.book 0
00X31-TX6-8800 2021 ILX Navigation Manual NM-15164
19 ACURA ILX NAVI-31TX68600.book 1
Contents Quick Reference Guide
Start-up 20 Voice Control System 22 Personal Information 24 Routing 36 Guidance 45 Map 52 Customized Features 66
2 Navigation P. 73 Entering a Destination 74 Calculating the Route 99 Driving to Your Destination 102 Map/Route Menu 109 Changing Your Route 122 Changing Your Destination 136 Resuming Your Trip 139
2 Troubleshooting P. 141 Troubleshooting 142 Error Messages 148
2 Reference Information P. 149 System Initialization 150 System Limitations 152 Client Assistance 154 Legal Information 157
2 Voice Commands P. 163 Voice Commands 164
P. 2
System Setup P. 19
Navigation P. 73
Troubleshooting P. 141
Reference Information P. 149
Voice Commands P. 163
Index P. 166
2
Q u
ick R eferen
ce G u
id e
19 ACURA ILX NAVI-31TX68600.book 2
Quick Reference Guide
OverviewFunctions at a Glance Navigation You can select any place/landmark as a destination by using voice control or the Interface Dial. The navigation
system gives you turn-by-turn driving directions to your destination.
Store home address (P31) Register 1 home address.
Track route (P102) Follow your route in real-time with voice guidance.
Traffic Information*1
View and avoid congestion and traffic incidents. *1: Available only in certain areas.
AcuraLink Real-Time TrafficTM (P119)
Bypass congestion and traffic incidents.
U.S. models
Canadian models
Subscription service
Store Save Locations (P25) Store up to 200 contacts in 2 address books.
Enter destination (P74) Select your destination using 13 methods.
Select route (P101) Set route preferences and select one of 3 routes.
Avoid certain areas (P43) Set streets and areas to detour around.
Add waypoints (P124) Add up to 4 pit stops along your route.
3
Q u
ick R eferen
ce G u
id e
19 ACURA ILX NAVI-31TX68600.book 3
AcuraLink(P13)
AcuraLink provides you with important information and messages between your vehicle and Acura.
Voice Control (P22)
Use voice commands for safer system control while driving. You can operate all key functions of the navigation system.
Audio, Bluetooth HandsFreeLink (HFL), and multi-view rear camera can be operated on this navigation system. See the Owners Manual for information on those systems.
4
Q u
ick R eferen
ce G u
id e
19 ACURA ILX NAVI-31TX68600.book 4
System Controls
On Demand Multi-Use DisplayTM
Navigation
Voice Control
6 Microphone (P22)
5 Interface Dial/ ENTER/MENU Button (P6)
2 BACK Button
7 (Pick-Up) Button
4 SETTINGS Button 8 (Hang-Up/Back) Button
9 (Talk) Button (P5)
3 (Display Mode) Button (P57)
(Power) Button/Volume Knob
1 NAV Button (P20)
Information Screen
See the Owners Manual for other buttons.
Q u
ick R efe
19 ACURA ILX NAVI-31TX68600.book 5
Voice Control Operation
5
ren ce G
u id
e
Voice Portal Screen
a Press and release the (Talk) button mounted on the steering wheel. The system displays voice commands that can be accepted on the displayed screen.
The system beeps when ready for a command. Press the (Hang-Up/ Back) button to cancel.
Available voice commands are highlighted on the screen. Say only and exactly what is on the screen.
b Say a voice command. After that, follow the voice prompt and say a voice command.
The audio system is muted during voice control mode.
You can use other voice commands on the Voice Portal screen. The system recognizes only certain commands. Available navigation voice commands (P164)
Say Voice Help to enter supported commands for the current screen. A voice help tutorial is also available. Voice Help (P14)
During the voice control mode, press and hold the (Hang-Up/Back) button to return to the last screen before the voice control mode is entered.
Set Voice Prompt to Off to bypass the voice prompt. See your Owners Manual.
Carefully read the usage note for the voice control. Voice Control System (P22)
6
Q u
ick R eferen
ce G u
id e
19 ACURA ILX NAVI-31TX68600.book 6
Interface Dial/ENTER/MENU Button Operation
Rotate dial
Changes scale Map screens
Press ENTER/MENU
Shows Menu screen Selects function Selects map icon Map screens
Move
up down left rightHighlights menu options Menu screens
Selects highlighted option Menu screens
Selecting Icon
You will see these icons in each chapter. They represent how you can operate the Interface Dial.
Move up Move left Move right
Scrolls map (8 directions) Map screens
Selects labeled function Moves between pages of a list Menu screens
Rotate dial
Press ENTER/ MENU
Move down
Q u
ick R efe
19 ACURA ILX NAVI-31TX68600.book 7
How to Enter Information You can enter information (e.g. city names, street names, personal names, business names comprising letters, numbers, and symbols) when prompted on the input screen.
7
ren ce G
u id
e
Using the keyboard displayed on the On Demand Multi-Use DisplayTM
Select the desired character.
Select to display upper/lower case characters.
Select to display symbols and accented characters.
Select Space to enter a space character.
Select to remove the last entered character.
Select Search to start searching (when available).
Select OK to finish entering.
Certain screen functions are limited or inoperable while the vehicle is moving. For these functions, use available voice commands or pull over to proceed.
Number of Hits
On input search screens, the number of hits in the map database is displayed.
Rotate to select an appropriate entry.
Information screenOn Demand Multi-Use DisplayTM
8
Q u
ick R eferen
ce G u
id e
19 ACURA ILX NAVI-31TX68600.book 8
Map Screen Legend
Golf course
GPS signal strength
Best reception
Feature areas
Park
Streets
Map scale (P113)
No icon: Poor/No reception
Good reception
Hospital Shopping mall
Airport
Body of water Cemetery University
Current street nameCurrent vehicle position (P112)
Freeway/highway
State route
Road
One-way street
Acura dealer
AcuraLink Message icon (P13)
AcuraLink signal indicator
Landmark icons (P54)
Honda dealer (U.S.)
Honda dealer (Canada)
School Parking lot
Gas station
Hospital
Post office
Restaurant
Freeway exit information (U.S.) / Highway exit information (Canada)
Parking garage
Grocery store
Hotel/Lodging
ATM
Map orientation (P59)
North up
Current map scale
Heading up
3D map
State line
Industrial complex Military base
Unverified road
Scenic road
Pedestrian street
Q u
ick R efe
19 ACURA ILX NAVI-31TX68600.book 9
During Route Guidance During route guidance, route information is displayed on the map screen and guidance screen.
Press the NAV button to toggle the map, guidance screen, direction list, and Navigation Menu while on a route. When not on a route, the NAV button will toggle between the map and the Navigation Menu.
9
ren ce G
u id
e
Map Screen
Guidance Screen
Guide to destination or waypoint
Estimated time to destination (waypoint)
Distance to destination (waypoint) Distance of the actual route. Waypoint (P124)
Tracking dots (P106)
Next guidance indicator Distance to the next guidance point. Calculated route (unverified roads) (P104)
Destination icon
Calculated route (P102)
Guide to destination or waypoint
Estimated time to destination (waypoint)
Distance to destination (waypoint) Distance of the actual route.
Guidance point
No entry icon
Guidance indicator Street name of guidance point, distance to the guidance point, and exit number. Lane guidance
Day or Night Mode Press the (Display mode) button to manually switch between day and night mode.
Turn-by-Turn Directions The next guidance point appears on the multi-information display.
Day mode Night mode
Multi-information Display
Remaining distance
Street name of next guidance point
Next driving maneuver is approaching
10
Q u
ick R eferen
ce G u
id e
19 ACURA ILX NAVI-31TX68600.book 10
NavigationHome Address and Going Home The Home feature automatically routes you to your home address from any location simply by selecting Go Home.
Storing Your Home Address
a Press the SETTINGS button.
b Rotate to select Navigation Settings. Press .
c Rotate to select Edit Go Home.
Press .
d Rotate to select Name. Press .
e Enter a name. Select OK.
f Rotate to select Address. Press .
g Enter an address. Select OK.
h Rotate to select Phone No. Press .
i Enter a phone number. Select OK.
j Rotate to select Save / Delete. Press .
k Rotate to select Save. Press .
Going Home
a From the map screen, press .
b Rotate to select Go Home. Press .
c Rotate to select Set as Destination. Press .
Q u
ick R efe
19 ACURA ILX NAVI-31TX68600.book 11
NavigationEntering a Destination Enter your destination using one of several methods, follow the route guidance on the map or the guidance screen to your destination.
11
ren ce G
u id
e
a From the map screen, press .
b Rotate to select Address. Press .
c Rotate to select Street. Press .
d Enter the name of your destination street. Select Search.
e Rotate to select your destination street from the list. Press .
f Enter the street number. Select Search.
g Rotate to select your destination street number from the list. Press .
h If there is more than one city with the specified street, a list of cities will be displayed. Rotate to select the desired city from the list. Press .
i Rotate to select Set as Destination. Press . Route guidance to the destination begins.
Route Preference: Choose Max or Min for the five settings.
View Routes: Choose one of three routes.
12
Q u
ick R eferen
ce G u
id e
19 ACURA ILX NAVI-31TX68600.book 12
NavigationChanging Route or Destination You can alter your route by adding waypoints to visit, adding streets to avoid, or changing your destination during route guidance.
Adding a Waypoint (Pit Stop) You can add up to four waypoints along your route. (P124)
a From the map screen, press .
b Move or to select Map/Route.
c Rotate to select Destination List. Press .
d Rotate to select Add New Destination. Press .
e Rotate to select Find Along Route. Press .
f Rotate to select location and search method. Press .
Search Around: Search around a location.
Search Along: Search between two locations.
g Select the icon category and location to add to the Destination List when prompted. Edit the order of destinations if necessary.
h Rotate to select Options. Press .
i Rotate to select Start Route. Press .
Changing Your Destination There are several methods you can use to specify a new destination during route guidance.
Selecting an icon on the map (P137) Scroll the map to position the cursor over a place/landmark icon or a new area on the map. Press twice.
Entering a new destination (P138) Press . Move to select Destination and enter a new destination.
Canceling Your Route
a Press .
b Move or to select Map/Route.
c Rotate to select Cancel Route. Press .
13
Q u
ick R eferen
ce G u
id e
19 ACURA ILX NAVI-31TX68600.book 13
AcuraLink AcuraLink Messages AcuraLink provides a direct communication link between you and Acura. It sends and receives several kinds of messages through the Acura server.
Traffic Information*/AcuraLink Real-Time TrafficTM*
Displays continuously updated traffic information and recalculates your route in response to traffic flow, incidents, or road closures. (P119)
The following features are available:
Vehicle feature guide
Operating quick tips
Safety and maintenance information
Diagnostic information
Dealer appointment and maintenance reminders
Traffic information available
Traffic information off or map scale too large
No icon: Out of coverage area
Traffic incident icons
Traffic status indicator (P119)
Traffic flow indicator Congestion
Incident
Weather Heavy Moderate
Free-flow
Construction
Road Closed
NOTE: AcuraLink Real-Time TrafficTM is a subscription service. For more information, contact an Acura dealer or visit www.acura.ca/owners/acuralink.
Canadian models
* Not available on all models
14
Q u
ick R eferen
ce G u
id e
19 ACURA ILX NAVI-31TX68600.book 14
Voice Help This navigation system comes with voice help, which shows you what command to say when using the voice command functions.
Command Help
a Press and release the (Talk) button.
b Say Voice Help.
The voice help screen is displayed. The Voice Help command is available on most screens.
c Say one of the options from the list of available commands by category (e.g.,
Navigation Commands).
d The system displays a list of all available commands for the category. Press to hear the list read aloud.
Voice Recognition Guide
a Say Voice Recognition Guide on the voice help screen.
For Voice Settings see your Owners Manual.
b The system reads the tips for the voice control.
Rotate to read the tips.
Move or to display the previous/next page.
Q u
ick R efe
19 ACURA ILX NAVI-31TX68600.book 15
Troubleshooting For more Information (P141)
15
ren ce G
u id
e
Why does the vehicle position icon on the map lag a short distance behind my actual position, especially at intersections?
This is normal. The navigation system is unaware of the width of intersections. Large differences in vehicle position can indicate a temporary loss of the GPS signal.
Why does the time to destination display sometimes increase even though I am getting closer to my destination?
The time to destination is based on your actual road speed and traffic conditions to give you a better estimate of arrival time.
How do I specify a destination when an entered city or street could not be found?
Try entering the street first. Some cities are lumped in with a major metro area. In rural unverified areas or new subdivisions, streets may be missing or only partially numbered.
How do I turn on the navigation system voice guidance?
Press the SETTINGS button. Select Navigation Settings and press . Move to select Guidance. Select Guidance Volume and press . Adjust it to the preferred volume level.
My battery was disconnected or went dead and the navigation system is asking for a code. Where do I find it?
In most cases you do not need to enter a code. Simply press and hold the (Power) button for two seconds, the system should reactivate.
2 System Initialization P. 150
16
19 ACURA ILX NAVI-31TX68600.book 16
How to Use This Manual This section explains different methods on how you can easily find information in this manual.
Searching the Table of Contents (P1)
Find the general chapter related to what you are looking for (e.g., entering a destination from the Address Book). Go to that chapter to view a more specific table of contents.
Searching the Index (P166)
This more detailed table of contents shows you exactly what information is listed by section and title.
The Index consists of main terms and sub-entries. The sub-entries help you get to the desired page depending on what you are looking for.
Table of Contents Chapter Contents
Information Screen Index
There is a Table of Contents and a more detailed Chapter Contents to help find the desired information.
Menu items displayed on the information screen (e.g., Address Book) can be found individually in the Index.
More Detailed Contents
Go to the Next page
19 ACURA ILX NAVI-31TX68600.book 17
17
Press the hard button on the system control panel.
Menu Tree
The menu tree helps guide you through the systems menu options. To get to your desired function, follow the menu tree in order of the steps displayed.
Press .
Select the menu option with the Interface Dial.
After following the menu tree, step-by-step instructions explain how to achieve the desired result.
Sample pages and images in this section may differ from the actual ones.
Rotate to select Address Book. Press .
ENTER/MENU button Address Book
18
19 ACURA ILX NAVI-31TX68600.book 18
19 ACURA ILX NAVI-31TX68600.book 19
System Setup
This section describes the start-up procedure and the navigation and setup functions.
19
Start-up ................................................... 20 Voice Control System ............................. 22
Command Input .................................... 22 Voice Recognition .................................. 23
Personal Information.............................. 24 Address Book......................................... 25 Home Address ....................................... 31 PIN Numbers .......................................... 32 Previous Destination............................... 33 Category History .................................... 34 Download POI........................................ 35
Routing .................................................... 36 Route Preference.................................... 37 Unverified Routing ................................. 39
Traffic Rerouting .....................................41 Edit POI Search Radius Along Route ........42 Avoided Area..........................................43
Guidance ..................................................45 Guidance Mode ......................................46 Street Name Guidance ............................48 Non-map Screens....................................49 Guidance Point .......................................50 Estimated Time .......................................51
Map...........................................................52 Showing Icons on Map ...........................54 Color ......................................................56 View (Map Orientation)...........................59 3D Angle Adjustment .............................60
Straight Line Guide ................................ 61 Display Tracking ..................................... 62 Correct Vehicle Position ......................... 64
Information Functions ............................ 65 System Device Information ..................... 65 Map Data Update .................................. 65
Customized Features .............................. 66
20
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 20
Start-up
1 Start-up
If the navigation system loses power at any time, you may need to press and hold the (Power) button for more than two seconds, or you may be prompted for the five-digit security code.
2 System Initialization P. 150
At start-up, the drivers keyless access remote is automatically detected and the address book settings, setup preferences, wallpapers, and audio settings for that driver (e.g., Driver 1) are loaded.
OK on the Confirmation screen cannot be selected by using a voice command.
The navigation system starts automatically when you set the power mode to ACCESSORY or ON. At start-up, the following Confirmation screen is displayed.
1. Press to continue. u If you do not press , the map
screen is displayed after a certain period of time.
u The system will automatically start up the feature that was used the last time.
2. Press the NAV button if a different mode is selected. u Your current position is
displayed on the map screen.
uuStart-upu System
Setu p
19 ACURA ILX NAVI-31TX68600.book 21
Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayed-out option using the Interface Dial until the vehicle is stopped.
Voice commands are still operable while the vehicle is in motion.
Limitations for Manual Operation
Disabled option
21
22
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 22
Voice Control System
1 Voice Control System
The system displays voice commands that can be accepted on the displayed screen. Say only and exactly what is on the screen.
1 Command Input
The audio system is muted while using the voice control system.
Your vehicle has a voice control system that allows hands-free operation for most of the navigation system functions. The voice control system uses the (Talk) and (Hang-Up/Back) buttons on the steering wheel and a microphone near the map lights on the ceiling. A Getting Started feature provides a tutorial that explains how to use the voice control system.
2 Voice Recognition Guide P. 14
Command Input If the system does not understand a command or you wait too long to give a command, the system asks you to repeat the command. When you give a command, the system generally either repeats the command as a confirmation or asks you for further information. If you do not wish to hear this feedback, you can turn it off. However, listening to the feedback will help familiarize you with the way the system expects commands to be phrased. If the system cannot perform a command or the command is not appropriate for the screen you are on, the system beeps. On character input screens, a list of possible characters is displayed if the system does not recognize your command. You can find out which voice commands are available for a particular screen using the Voice Help command. The system will display and read the list of available commands to you.
2 Voice Help P. 14
uuVoice Control SystemuVoice Recognition System
Setu p
1 Voice Recognition
The voice control system can only be used from the drivers seat because the microphone unit removes noises from the front passengers side.
19 ACURA ILX NAVI-31TX68600.book 23
Voice Recognition To achieve optimum voice recognition when using the navigation voice control system: Make sure the correct screen is displayed for the voice command that you are
using. The system recognizes only certain commands. Available navigation voice command
2 Voice Commands P. 164
Close the windows and moonroof. Adjust the dashboard and side vents so air does not blow onto the microphone
on the ceiling. Speak in a clear, natural speaking voice without pausing between words. Reduce any background noise and the climate controls fan speed if possible. The
system may misinterpret your command if more than one person is speaking at the same time.
Refer to the Voice Help feature. 2 Voice Help P. 14
23
24
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 24
Personal Information
1 Personal Information
Personal information cannot be backed up or moved to another navigation system.
The navigation settings can also be selected from the navigation menu. Press from the map screen. Move or to select Destination or Map/ Route. Rotate to select Navigation Settings.
Default The following settings will be reset: Personal Information Routing Guidance Map
H SETTINGS button u Navigation Settings u Personal Info
Use the personal information menu to select and set your address books, home address, and PINs. You can also delete unwanted destinations from the list of previously routed destinations.
Rotate to select an item. Press .
The following items are available: Default: Restores the Navigation Settings the factory default settings. Address Book: Stores new addresses or edits your address book.
2 Address Book P. 25
Edit Go Home: Sets or edits your home address. 2 Home Address P. 31
PIN Number: Sets or changes your PIN. 2 PIN Numbers P. 32
Previous Destination: Deletes the destination history. 2 Previous Destination P. 33
Category History: Deletes the place categories you recently used. 2 Category History P. 34
Download POI: Edits and deletes the Imported POI categories. 2 Download POI P. 35
uuPersonal InformationuAddress Book System
Setu p
1 Address Book
Up to 200 addresses can be stored to each address book of Driver 1 and Driver 2 separately.
If you have PIN-protected your address book, enter your PIN when prompted. Press to select OK. PINs are optional.
2 PIN Numbers P. 32
Any address book categories you create are also displayed.
2 Selecting an Address Book Category P. 29
19 ACURA ILX NAVI-31TX68600.book 25
Address Book H SETTINGS button u Navigation Settings u Personal Info u Address Book
Store up to 200 address entries in two address books (Driver 1 and Driver 2). You can add, edit, and delete information in the address books.
Move or to display only the addresses in the selected category. To change the user address book (Driver 1 or Driver 2), rotate to select Options. Press . Rotate to select Driver 1 or Driver 2. Press
.
25Continued
uuPersonal InformationuAddress Book
26
System Setu
p
1 Adding an Address Book Entry
If you do not give the address a name, one is automatically assigned (e.g., Address 001). You can re-enter, edit, or make changes to any entry. Address is the only required field.
19 ACURA ILX NAVI-31TX68600.book 26
H SETTINGS button u Navigation Settings u Personal Info u Address Book u Options
This section explains how to enter the name and address. 1. Rotate to select Add New
Address. Press .
2. Rotate to select an item. Press .
The following items are available: Name: Edits the name of the entry. Address: Edits the address of the entry. Phone No.: Edits the phone number of the entry. Category: Specifies the category of the entry.
Adding an Address Book Entry
uuPersonal InformationuAddress Book System
Setu p
1 Adding an Address Book Entry
When you use Place Name or Place Category, the phone number is automatically entered.
You can also add a phone number and category.
19 ACURA ILX NAVI-31TX68600.book 27
Alert: Alerts you when you approach the address entry. On: Beeps and displays a message when your vehicle gets near the entry. Off (factory default): Disables the feature.
3. Rotate to select Name. Press .
4. Enter a name or title. Select OK. 5. Rotate to select Address.
Press . 6. Rotate to select an item for
specifying the address. Press . 7. Rotate to select Save /
Delete. Press . 8. Rotate to select Save. Press
. The following items are available: Current Position: Select your current location. Address: Enter an address on the character input screen when prompted.
2 Address P. 76
Place Category: Select a category to search for a place/landmark (e.g., Banking, Lodging).
2 Place Category P. 85
Previous Destination: Select a previous destination. 2 Previous Destination P. 84
Place Name: Enter the name of a place/landmark. 2 Place Name P. 89
Local Search: Sets a destination by using Local Search. 2 Local Search P. 87
Place Phone Number: Enter the phone number of a place/landmark. 2 Entering a Destination P. 74
Continued 27
28
uuPersonal InformationuAddress Book
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 28
Intersection: Specify the intersection by entering two streets. 2 Entering a Destination P. 74
Download POI: Select a place/landmark from a list of the imported POI (category and places) data you created.
2 Entering a Destination P. 74
Select Using Map: Enter a place/landmark by scrolling through the map. 2 Entering a Destination P. 74
Scenic Route: Enter a place/landmark by using a list of scenic roads for each state or province (U.S. and Canada only).
2 Entering a Destination P. 74
Coordinate: Enter latitude and longitude of a place/landmark. 2 Entering a Destination P. 74
uuPersonal InformationuAddress Book System
Setu p
1 Editing an Address Book Entry
The entered contents are displayed on the Edit address screen.
1 Selecting an Address Book Category
Up to 100 categories can be stored to each address book of Driver 1 and Driver 2 separately.
If you delete a category that is used by other addresses, the category type for those addresses changes to Unfiled.
19 ACURA ILX NAVI-31TX68600.book 29
H SETTINGS button u Navigation Settings u Personal Info u Address Book
1. Rotate to select the address to edit. Press .
2. Enter the name, address, phone number, and category fields.
2 Adding an Address Book Entry P. 26
3. Rotate to select Save / Delete. Press .
4. Rotate to select Save. Press .
H SETTINGS button u Navigation Settings u Personal Info u Address Book
1. Rotate to select an address. Press .
2. Rotate to select Category. Press .
3. Rotate to select a category. Press . u Create a category in advance.
2 Creating a New Category P. 30
Editing an Address Book Entry
Selecting an Address Book Category
Continued 29
uuPersonal InformationuAddress Book
30
System Setu
p
1 Deleting an Address Book Entry
When you transfer the vehicle to a third party, delete all address book entries.
19 ACURA ILX NAVI-31TX68600.book 30
Creating a New Category 1. Rotate to select Options. Press . 2. Rotate to select New Category. Press . 3. Enter a name and select an icon when prompted.
u The created category is displayed in the list of categories.
Deleting or Editing a Category 1. Rotate to select Options. Press . 2. Rotate to select Delete or Edit. Press . 3. Delete an existing category, or change the name and icon.
u The selected category to delete is indicated with a trash icon. Select Options, press , and rotate to select Delete Selected.
H SETTINGS button u Navigation Settings u Personal Info u Address Book
1. Rotate to select the address to delete. Press .
2. Rotate to select Save / Delete. Press .
3. Rotate to select Delete. Press .
4. Rotate to select Yes. Press to delete the address.
Deleting an Address Book Entry
uuPersonal InformationuHome Address System
Setu p
1 Home Address
If you have PIN-protected your home addresses, enter your PIN when prompted. Select OK. PINs are optional.
2 PIN Numbers P. 32
If your home street is not in the system database, park on the nearest verified street to your home. When entering the Address field, rotate to select Current Position to use your current location as the home address and press .
You can delete a home address if necessary. Rotate to select Save / Delete. Press . Rotate to
select Delete. Press . Rotate to select Yes. Press .
When you transfer the vehicle to a third party, delete all home addresses.
The home icon is shown on the map screen on the 1/ 20 and 1/8 mile (80 and 200 m) scales.
19 ACURA ILX NAVI-31TX68600.book 31
Home Address H SETTINGS button u Navigation Settings u Personal Info u Edit Go Home
Set a home address that you frequently use. 1. Edit the name, address, and phone
number the same way as an address in the address book.
2 Adding an Address Book Entry P. 26
2. Rotate to select Save / Delete. Press .
3. Rotate to select Save. Press .
31
32
uuPersonal InformationuPIN Numbers
System Setu
p
1 PIN Numbers
PIN Personal Identification Number (PIN) is a password used to access personal data.
PINs are optional. If you choose to use a PIN, keep a note of the number in a secure location. If you forget your PIN, a dealer will have to reset the navigation system and all of your stored information will be erased. The factory default is no PIN.
If you want to stop using a PIN, select Turn Off PIN Entry.
19 ACURA ILX NAVI-31TX68600.book 32
PIN Numbers H SETTINGS button u Navigation Settings u Personal Info u PIN Number
Set a four-digit PIN for protecting personal addresses and your home address. Once you set a PIN, you are prompted to enter it whenever you access a personal address or a home address.
1. Rotate to select the PIN to create. Press .
2. Enter a four-digit PIN. Select OK. 3. Re-enter the new PIN, when
prompted, to confirm the number you just entered. Select OK. u If you have not entered the
same number both times, an INCORRECT PIN message is displayed. Enter your PIN again.
uuPersonal InformationuPrevious Destination System
Setu p
1 Previous Destination
Up to 50 destinations can be stored.
To cancel the selection of a previous destination, rotate to highlight the destination again. Press
to de-select it.
19 ACURA ILX NAVI-31TX68600.book 33
Previous Destination H SETTINGS button u Navigation Settings u Personal Info u Previous
Destination
The navigation system maintains a list of your previously routed destinations as a shortcut for entering the same destination in the future. You can delete some or all of your previous destinations from the list.
1. Rotate to select the destination to delete. Press . u Repeat the procedure as
necessary. u Items to be deleted are
indicated with a trash icon.
2. Rotate to select Options. Press .
3. Rotate to select Delete Selected. Press . u The confirmation message will
appear. 4. Rotate to select Yes. Press .
Trash icon
33
34
uuPersonal InformationuCategory History
System Setu
p
1 Category History
Up to 50 categories can be stored.
To cancel the selection of a category, rotate to highlight the category again. Press to de-select it.
19 ACURA ILX NAVI-31TX68600.book 34
Category History H SETTINGS button u Navigation Settings u Personal Info u Category
History
The navigation system maintains a list of your recently used place categories as a shortcut for selecting the same categories in the future. You can delete some or all of your recently used categories from the list.
1. Rotate to select the category to delete. Press . u Repeat the procedure as
necessary. u Items to be deleted are
indicated with a trash icon.
2. Rotate to select Options. Press .
3. Rotate to select Delete Selected. Press . u The confirmation message will
appear. 4. Rotate to select Yes. Press .
Trash icon
uuPersonal InformationuDownload POI System
Setu p
1 Importing POI Categories
For more information about connecting a USB flash drive, see your Owners Manual.
POI data in csv and kml formats can be imported.
You can download POI data from various POI websites.
If you select From AcuraLink, you can download POI data from the AcuraLink server.
1 Editing POI Categories
If you select From AcuraLink, you can edit Alert only.
19 ACURA ILX NAVI-31TX68600.book 35
Download POI Import custom Points of Interest (POI) into the navigation system and set the POI as a destination. You can also add, edit, and delete POIs.
H ENTER/MENU button (on map) u Destination u Download POI
1. Connect a USB flash drive with stored POI data to the USB connector.
2. Rotate to select Options. Press .
3. Rotate to select Import from USB. Press .
4. Rotate to select a category to import. Press .
H SETTINGS button u Navigation Settings u Personal Info u Download POI 1. Rotate to select the downloaded POI category to edit. Press . 2. Rotate to select an item. Press .
The following items are available: Alert Setting: Alerts you when you approach the places/landmarks in the
category. On: Beeps and displays a message when your vehicle gets near the places/ landmarks in the category. Off (factory default): Disables the feature.
Delete Category: Deletes all places/landmarks and icon in the selected category. Edit Icon: Changes the category icon.
Importing POI Categories
Editing POI Categories
35
36
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 36
Routing
1 Routing
The navigation settings can also be selected from the navigation menu. Press from the map screen. Move or to select Destination or Map/ Route. Rotate to select Navigation Settings.
Move to select Personal Info, so that you can use the Default.
Default The following settings will be reset: Personal Information Routing Guidance Map
H SETTINGS button u Navigation Settings u Routing
Choose various settings that determine the navigation system functionality during route calculation.
Rotate to select an item. Press .
The following items are available: Default: Restores the Navigation Settings the factory default settings. Route Preference: Changes the route preferences (calculating method).
2 Route Preference P. 37
Unverified Routing: Sets whether you use the route guidance in unverified areas.
2 Unverified Routing P. 39
Traffic Rerouting: Sets whether you use automatic recalculation based on traffic information.
2 Traffic Rerouting P. 41
Edit POI Search Radius Along Route: Sets the distance from the route to find waypoints.
2 Edit POI Search Radius Along Route P. 42
Avoided Area: Specifies areas to avoid when calculating a route. 2 Avoided Area P. 43
uuRoutinguRoute Preference System
Setu p
1 Route Preference
The calculated route may be the shortest route or the route you would choose. For safety reasons, the system generally applies the following rules to your route: Shortcuts through residential areas are avoided. Right turns are favored over left turns or U-turns. Time-restricted turns (turns prohibited at certain
times of the day) are not used.
Check the ferry schedule when the calculated route includes ferry route.
ETC is short for the Electronic Toll Collection system.
Server Route*
You can view three routes distributed from AcuraLink.
2 Viewing the Routes P. 101 Set to On and select Optimal Routes to select
your desired route. 2 Optimal Routes* P. 38
19 ACURA ILX NAVI-31TX68600.book 37
Route Preference H SETTINGS button u Navigation Settings u Routing u Route Preference
Change the route preference by selecting minimum or maximum driving methods. 1. Rotate to select an item. Press
. 2. Rotate to select Max or Min.
Press . u Repeat step 1 and 2 as
necessary.
37Continued * Not available on all models
uuRoutinguRoute Preference
38
System Setu
p
1 Optimal Routes*
Optimal Routes is a subscription service. For more information, contact an Acura dealer or visit www.acura.ca/owners/acuralink.
19 ACURA ILX NAVI-31TX68600.book 38
H SETTINGS button u Navigation Settings u Routing u Route Preference
You can select desired routes by sorting the route list. The three top routes can be displayed on the Select a Route screen.
2 Viewing the Routes P. 101
1. Rotate to select Optimal Routes. Press .
2. Rotate to select a route type. Press .
3. Rotate to change the order of the selected route type. Press .
Optimal Routes*
* Not available on all models
uuRoutinguUnverified Routing System
Setu p
1 Unverified Routing
Unverified roads are found in rural areas, and typically include residential streets away from the center of a town. They may not be accurate and can contain errors in location, naming, and address range.
Unverified roads are shown only when viewing the map in the 1/20, 1/8, 1/4, 1/2, 1 and 2 (mile) / 80, 200, 400, 800 (m), 1.6 and 3.2 (km) map scales.
19 ACURA ILX NAVI-31TX68600.book 39
Unverified Routing H SETTINGS button u Navigation Settings u Routing u Unverified Routing
Receive turn-by-turn map and voice guidance in unverified areas. Rotate to select On or Off. Press
.
Differences Off On (factory default)
On or Off? The driver wishes to manually navigate using the navigation map and choose the streets that lead to the destination.
The driver chooses to let the navigation system suggest possible routing, knowing that the guidance may not be accurate.
Route calculation
Route is usually longer, using verified roads whenever possible.
Route is shorter, but uses unverified (purple) streets that may not be accurate.
39Continued
40
uuRoutinguUnverified Routing
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 40
Differences Off On (factory default)
Route line The route line uses verified streets only (when possible). If Straight Line Guide is set to On, a pink vector line is displayed on the map that continually points to your destination.
2 Straight Line Guide P. 61
A blue-pink route line highlights suggested unverified streets on the map while traveling to your destination.
Cautionary messages
Cautionary pop-up screens and voice announcements remind you to obey all traffic restrictions when starting route guidance, approaching an unverified area, and entering an unverified street.
Cautionary pop-up screens and voice announcements remind you to obey all traffic restrictions when entering an unverified street.
Guidance (map/voice)
There is no turn-by-turn map or voice guidance.
Voice guidance commands end with the phrase if possible to remind you to verify all traffic restrictions.
Directions list A direction list is typically not available. However, depending on your route, directions are provided to help you reach the first available verified road.
A direction list is provided showing street names and turn symbols in pink.
uuRoutinguTraffic Rerouting System
Setu p
1 Traffic Rerouting
You must be in or near a traffic-enabled city to receive coverage for that area. Traffic information is available in certain areas in the lower 48 states, Hawaii, and some cities in Canada.
2 Traffic Information P. 156
Traffic Rerouting requires an AcuraLink Real-Time TrafficTM subscription. See your Owners Manual for subscription information.
Automatic traffic rerouting may not provide a detour route depending on circumstances.
Canadian models
19 ACURA ILX NAVI-31TX68600.book 41
Traffic Rerouting H SETTINGS button u Navigation Settings u Routing u Traffic Rerouting
A faster route can be calculated based on continuously updated traffic information. 2 Traffic ReroutingTM P. 119
Rotate to select an option. Press .
The following options are available: On: The system reroutes automatically based on traffic information. Off (factory default): Disables the feature.
41
42
uuRoutinguEdit POI Search Radius Along Route
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 42
Edit POI Search Radius Along Route H SETTINGS button u Navigation Settings u Routing u Edit POI Search
Radius Along Route
Select the distance from your highlighted route line (on either side of your route) that the system will search for a waypoint.
2 Adding Waypoints P. 124
You can specify a different search distance for freeways/highways and surface streets.
1. Rotate to select an item. Press .
2. Rotate to select a search distance. Press .
The following items are available: On Freeways (U.S.)/On Highways (Canada): 1, 2, 5, or 10 miles (1.6, 3, 8, or 16
km) can be set. Factory default is 2 miles (3 km). On Surface Streets: 1/2, 1, 2, or 5 miles (0.8, 1.6, 3, or 8 km) can be set. Factory
default is 1/2 mile (0.8 km).
uuRoutinguAvoided Area System
Setu p
1 Avoided Area
The maximum size of one side of an avoid area is approximately 1/2 mile (800 m).
If your selected area contains a freeway/highway, you are asked Do you want to avoid freeways (highways)? Answering No allows you to use a route through an avoid area on a freeway/highway without any pop-up messages.
You can select areas to avoid; however, you cannot select roads or areas that you want the system to use for routing.
You can enter up to 25 characters for the name.
19 ACURA ILX NAVI-31TX68600.book 43
Avoided Area H SETTINGS button u Navigation Settings u Routing u Avoided Area
Specify up to five areas to avoid (e.g., road construction, closures), if possible, when the system calculates routes to your destination.
1. Rotate to select Options. Press .
2. Rotate to select New Area.
3. Rotate to select Name to label the area to avoid. Press .
4. Enter a name or title. Select OK. 5. Rotate to select Area to
define the area to avoid. Press .
The following options are available (after an area is set): Save: Saves the selected avoid area. View Area: Displays the selected avoid area on the map. Delete: Deletes the selected avoid area.
43Continued
uuRoutinguAvoided Area
44
System Setu
p
1 Avoided Area
Avoid area can be set in the 1/20, 1/8, or 1/4 mile (80, 200, or 400 m) map scales.
19 ACURA ILX NAVI-31TX68600.book 44
6. Rotate to select a method for specifying the area. Press .
The following options are available: Address: Specify the general area by entering an address.
2 Address P. 76
Select Using Map: Specify the general area by using map. 2 Select using Map P. 96
7. If you select Select Using Map, scroll the map to position the cursor over your desired start point, adjusting the map scale as necessary. Press to mark the start point. u To redo the area selection,
press the BACK button. 8. Scroll the map to draw the area.
Press to mark the end point. 9. Press to select OK.
u The area you specify is displayed in the list of areas to avoid.
Cursor
Avoid area
19 ACURA ILX NAVI-31TX68600.book 45
Guidance
Setu p
1 Guidance
The navigation settings can also be selected from the navigation menu. Press from the map screen. Move or to select Destination or Map/ Route. Rotate to select Navigation Settings.
Move to select Personal Info, so that you can use the Default.
Default The following settings will be reset: Personal Information Routing Guidance Map
H SETTINGS button u Navigation Settings u Guidance
Choose various settings that determine the navigation system functionality during route guidance.
Rotate to select an item. Press .
The following items are available: Default: Restores the Navigation Settings the factory default settings. Guidance Volume: Adjusts the navigation system volume level. Guidance Mode: Sets whether to display only the map screen or a split map-
guidance screen. 2 Guidance Mode P. 46
Street Name Guidance (US models): Sets whether to read out the street names during voice guidance.
2 Street Name Guidance P. 48
Non-map Screens: Sets whether the guidance screen interrupts the screen display. 2 Non-map Screens P. 49
Guidance Point: Sets whether to display the guidance information to the destination or the next waypoint.
2 Guidance Point P. 50
Estimated Time: Sets whether to display the remaining time or arrival time to the guidance point.
2 Estimated Time P. 51
45
46
uuGuidanceuGuidance Mode
System Setu
p
1 Guidance Mode
Press the NAV button to switch between the map, next guidance direction, and a list of guidance directions.
Turn-by-Turn Directions The next guidance point appears on the multi- information display.
2 Turn-by-Turn Directions P. 9
You can turn this feature on or off using the multi- information display. See the Owners Manual for instructions.
19 ACURA ILX NAVI-31TX68600.book 46
Guidance Mode H SETTINGS button u Navigation Settings u Guidance u Guidance Mode
Select the display mode for the map and guidance screens. Rotate to select an option. Press
.
The following options are available: Map (factory default): Displays only the map screen. When you approach a
guidance point, the next guidance point appears.
Map screen
Near the next guidance point
Next Maneuver screen
Next guidance point
uuGuidanceuGuidance Mode System
Setu p
19 ACURA ILX NAVI-31TX68600.book 47
Direction List: Displays the map and direction list simultaneously on the map screen. When you approach a guidance point, the next guidance point appears.
Next Maneuver: Displays the map and next guidance point simultaneously on the map screen.
Direction List screen
Guidance direction list
Near the next guidance point
Next Maneuver screen
Next guidance point
Next Maneuver screen
Next guidance point
Near the next guidance point
Next Maneuver screen
47
48
uuGuidanceuStreet Name Guidance
System Setu
p
1 Street Name Guidance
This feature is only available when the system language is set to English.
This feature may not be available in non-English speaking areas.
This function is available on U.S. models only.
19 ACURA ILX NAVI-31TX68600.book 48
Street Name Guidance H SETTINGS button u Navigation Settings u Guidance u Street Name
Guidance
The navigation system includes the street names during voice guidance (e.g., Turn right on Main Street).
Rotate to select an option. Press .
The following options are available: On (factory default): Voice guidance includes the street names. Off: Disables the feature.
uuGuidanceuNon-map Screens System
Setu p
19 ACURA ILX NAVI-31TX68600.book 49
Non-map Screens H SETTINGS button u Navigation Settings u Guidance u Non-map Screens
The navigation system temporarily interrupts the screen display to view the guidance screen as you approach a guidance point.
Rotate to select an option. Press .
The following options are available: On: The guidance screen interrupts other mode screens (e.g., audio, phone, etc.,
except the rear view camera mode). Off (factory default): Disables the feature.
49
50
uuGuidanceuGuidance Point
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 50
Guidance Point H SETTINGS button u Navigation Settings u Guidance u Guidance Point
Set the guidance point to display on the map screen. Rotate to select an option. Press
.
The following options are available: Destination (factory default): Displays the remaining/arrival time and distance to
the destination. Next Point: Displays the remaining/arrival time and distance to the next
waypoint.
uuGuidanceuEstimated Time System
Setu p
19 ACURA ILX NAVI-31TX68600.book 51
Estimated Time H SETTINGS button u Navigation Settings u Guidance u Estimated Time
Select the estimated time to display on the screen. Rotate to select an option. Press
.
The following options are available: Arrival: Displays the arrival time to the destination or the next waypoint. Remaining (factory default): Displays the remaining time to the destination or
the next waypoint.
51
52
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 52
Map
1 Map
The navigation settings can also be selected from the navigation menu. Press from the map screen. Move or to select Destination or Map/ Route. Rotate to select Navigation Settings.
Move to select Personal Info, so that you can use the Default.
Default The following settings will be reset: Personal Information Routing Guidance Map
H SETTINGS button u Navigation Settings u Map
Select the landmark icons to display on the map, select the color of the map, change the orientation of the map, or adjust the current position of the vehicle as displayed on the map.
Rotate to select an item. Press .
The following items are available: Default: Restores the Navigation Settings the factory default settings. Show Icon on Map: Selects the icons to display on the map.
2 Showing Icons on Map P. 54
Color (Day): Selects the color of the map for the Day mode. 2 Color P. 56
Color (Night): Selects the color of the map for the Night mode. 2 Color P. 56
View: Selects the map orientation (North-up, Heading-up, or 3D map). 2 View (Map Orientation) P. 59
3D Angle Adjustment: Adjusts the viewing angle for the 3D map. 2 3D Angle Adjustment P. 60
Straight Line Guide: Sets whether to display a straight guideline to the destination or waypoint.
2 Straight Line Guide P. 61
uuMapu System
Setu p
19 ACURA ILX NAVI-31TX68600.book 53
Display Tracking: Sets whether to display the tracking dots on the map. 2 Display Tracking P. 62
Delete Tracking: Deletes the tracking dots on the map. 2 Deleting Tracking Dots P. 63
Correct Vehicle Position: Adjusts the position of the vehicle on the map. 2 Correct Vehicle Position P. 64
System Device Information: Displays database, software, device, and vehicle identification information.
2 System Device Information P. 65
Map Data Update: Provides the status of map database updates. 2 Map Data Update P. 65
53
54
uuMapuShowing Icons on Map
System Setu
p
1 Showing Icons on Map
If you have PIN-protected your address book, enter your PIN when prompted. Move to select OK. PINs are optional.
2 PIN Numbers P. 32
19 ACURA ILX NAVI-31TX68600.book 54
Showing Icons on Map H SETTINGS button u Navigation Settings u Map u Show Icon on Map
Select the icons that are displayed on the map. 1. Rotate to select an item. Press
. u If the selected item has no sub
categories, pressing toggles the setting between On and Off.
u If the selected item has sub categories, proceed to the next step.
2. Rotate to select an option. Press . u Repeat step 1 and 2 as
necessary.
The following options are available: All On: Displays the landmark icons for all the sub categories.
2 Map Screen Legend P. 8
Custom: Fine-tunes the icon display. 2 Fine-tuning the Icons P. 55
Off: Hides the landmark icons for all the sub categories.
uuMapuShowing Icons on Map System
Setu p
19 ACURA ILX NAVI-31TX68600.book 55
Icons in some categories can be fine-tuned to display or hide. 1. Rotate to select the icons to
display on the map. Press . u Pressing toggles the check
mark display on or off. u Repeat the procedure as
necessary.
2. Rotate to select Options. Press .
3. Rotate to select Set Selected. Press .
Fine-tuning the Icons
55
56
uuMapuColor
System Setu
p
1 Color (Day)
The factory default is set to Beige.
1 Color (Night)
The factory default is set to Blue.
19 ACURA ILX NAVI-31TX68600.book 56
Color Set separate map colors for Day and Night modes.
H SETTINGS button u Navigation Settings u Map u Color (Day)
Rotate to select a color for the Day mode. Press .
H SETTINGS button u Navigation Settings u Map u Color (Night)
Rotate to select a color for the Night mode. Press .
Color (Day)
Color (Night)
uuMapuColor System
Setu p
1 Switching Display Mode Manually
A visual guide helps you see the difference between Day and Night modes.
2 Day or Night Mode P. 9
19 ACURA ILX NAVI-31TX68600.book 57
Set the screen brightness separately for Day and Night modes. Press the (Display mode) button to cycle through the display modes (Day to Night to Off).
1. Press the (Display mode) button. u The Brightness bar is displayed
for a few seconds. u Rotate to adjust the
brightness. Press . 2. Press the (Display mode)
button again. u Repeat the procedure to switch
the display modes.
Switching Display Mode Manually
Illumination Priority Operation
(Display Mode) button
1 Selects Day, Night, or Off display mode. This button has the highest priority and overrides all other display control adjustments listed below. Remember: Once you press this button, you assume full manual control of the display mode until the power mode is set to VEHICLE OFF (LOCK).
Sunlight sensor (see your Owners Manual for location)
2 If the sunlight sensor detects daylight and the headlights are turned on, the system automatically overrides the Night display and displays the Day display mode. Remember: If desired, use the (Display Mode) button to override this automatic choice.
Continued 57
58
uuMapuColor
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 58
Illumination Priority Operation
Dash illumination adjustment buttons (see your Owners Manual for location)
3 When headlights are turned on, and you wish to have the Day display mode, adjust the illumination to the full brightness setting (beeps). Remember: Adjust the dash brightness back to mid-range to allow auto switching by sensing if the headlights are on or off.
Headlights (Auto/ On/Off)
4 When turned on, the display changes to Night display mode. The previous three controls listed above can cancel this function. Remember: Use the (Display Mode) button to adjust the brightness of the display.
Screen color choice N/A The user can select the color of the screen that will be displayed for the Day and Night display modes described above.
uuMapuView (Map Orientation) System
Setu p
1 View (Map Orientation)
The red arrow in the symbol always points North.
Heading-up and 3D map view switch to the North-up view on the maximum map scale.
The birds eye view map switches to the Heading-up map while scrolling the map.
The viewing angle for the birds eye view can be adjusted.
2 3D Angle Adjustment P. 60
19 ACURA ILX NAVI-31TX68600.book 59
View (Map Orientation) H SETTINGS button u Navigation Settings u Map u View
Select the map orientation. Rotate to select an option. Press
.
The following options are available: North-up (factory default): Displays the map with North always pointing up. Heading-up: Displays the map so that the direction you are traveling is always
pointing up. 3D Map: Displays the birds eye view map.
59
60
uuMapu3D Angle Adjustment
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 60
3D Angle Adjustment H SETTINGS button u Navigation Settings u Map u 3D Angle Adjustment
Adjust the viewing angle. Rotate to adjust the angle. Press
.
uuMapuStraight Line Guide System
Setu p
19 ACURA ILX NAVI-31TX68600.book 61
Straight Line Guide H SETTINGS button u Navigation Settings u Map u Straight Line Guide
Set whether to display a straight guideline to the destination or waypoint. Rotate to select an option. Press
.
The following options are available: On (factory default): Displays a straight guideline on the map. Off: Disables the feature.
61
62
uuMapuDisplay Tracking
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 62
Display Tracking H SETTINGS button u Navigation Settings u Map u Display Tracking
The navigation system can be set to display white tracking dots (breadcrumbs) on the map screen.
Rotate to select an option. Press .
The following options are available: On: Displays white tracking dots.
2 Tracking Dots P. 106
Off (factory default): Disables the feature.
uuMapuDisplay Tracking System
Setu p
1 Deleting Tracking Dots
When you transfer the vehicle to a third party, delete the tracking dots.
19 ACURA ILX NAVI-31TX68600.book 63
H SETTINGS button u Navigation Settings u Map u Delete Tracking
Rotate to select Yes. Press .
Deleting Tracking Dots
63
64
uuMapuCorrect Vehicle Position
System Setu
p
1 Correct Vehicle Position
An apparent position error can occur where buildings, tunnels, and other objects block or reflect the GPS signals, forcing the system to use dead reckoning to determine your location and direction.
Using this function to adjust the vehicle position is not recommended. When the system reacquires a GPS signal, it will automatically place the vehicle in the correct location.
If you continually have to adjust the vehicle position, you may have problems with GPS reception or there may be database errors.
2 System Limitations P. 152
19 ACURA ILX NAVI-31TX68600.book 64
Correct Vehicle Position H SETTINGS button u Navigation Settings u Map u Correct Vehicle
Position
Manually adjust the current position of the vehicle as displayed on the map screen if the position appears to be incorrect.
1. Put the vehicle in Park. 2. Rotate to select Correct
Vehicle Position. Press . 3. Scroll the map to position the
cursor over at your correct position. Press .
4. Rotate to position the arrowhead in the correct direction the vehicle is facing.
5. Press to select OK.
19 ACURA ILX NAVI-31TX68600.book 65
Information Functions
Setu p
1 System Device Information
You will need this information when ordering a map update.
2 Obtaining a Navigation Update P. 155
1 Map Data Update
This operation is only available during a database update.
2 Obtaining a Navigation Update P. 155
System Device Information H SETTINGS button u Navigation Settings u Map u System Device
Information
View database, software, device, and vehicle identification information.
Map Data Update H SETTINGS button u Navigation Settings u Map u Map Data Update
Check the map data update status when updating the map database.
65
66
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 66
Customized Features
1 Customized Features
When you customize settings, make sure that the vehicle is at a complete stop and select the gear position to .
To customize other features, rotate , move , , or , and press . 2 List of customizable options P. 69
The following settings can be customized, see your Owners Manual. Bluetooth/Phone Settings Camera Settings Vehicle Settings Clock Settings AcuraLink Settings System Settings Smartphone Settings
Use the information screen to customize certain features.
How to customize Select your desired setting item by pressing the SETTINGS button, then rotating while the power mode is ON and the vehicle is at a complete stop. Press .
Information Screen
SETTINGS Button
Information Screen
uuCustomized Featuresu System
Setu p
19 ACURA ILX NAVI-31TX68600.book 67
Customization flow Information Screen
Unverified Routing Traffic Rerouting
Edit POI Search Radius Along Route
Routing
Avoided Area
Optimal Routes*
Freeways/Highways Toll Roads
Route Preference
ETC Roads Ferries U-Turn
Guidance Mode Street Name Guidance*
Non-map Screens
Guidance
Guidance Point Estimated Time
Address Book Edit Go Home PIN Number
Personal Info
Previous Destination
Download POI Category History
Navigation Settings
Server Route*
DefaultPress the SETTINGS button.
Guidance Volume
67Continued * Not available on all models
68
uuCustomized Featuresu
System Setu
p
Show Icon on Map Color (Day)
Color (Night) View
3D Angle Adjustment Straight Line Guide
Display Tracking Delete Tracking
Correct Vehicle Position System Device Information
Map Data Update
19 ACURA ILX NAVI-31TX68600.book 68
Map
uuCustomized Featuresu System
Setu p
19 ACURA ILX NAVI-31TX68600.book 69
List of customizable options
Setup Group Customizable Features Description Selectable Settings
Navigation Settings
Default Cancels/Resets all customized items in the Navigation Settings group as default.
Yes/No
Personal Info
Address Book Stores new addresses or edits your address book.
Edit Go Home Sets or edits your home address.
PIN Number Sets or changes your PIN.
Previous Destination Deletes the destination history.
Category History Deletes the place categories you recently used.
Download POI Edits and deletes the Imported POI categories.
Information Screen
69Continued
70
uuCustomized Featuresu
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 70
*1: Default Setting
Setup Group Customizable Features Description Selectable Settings
Navigation Settings
Routing
Route Preference
Optimal Routes*
You can select desired routes by sorting the route list.
2 Optimal Routes* P. 38
Freeways/ Highways
Change the route preference by selecting minimum or maximum driving methods.
Max*1/Min
Toll Roads Max*1/Min
ETC Roads Max/Min*1
Ferries Max*1/Min
U-Turn Max/Min*1
Server Route* View three routes distributed from AcuraLink. On/Off*1
Unverified Routing Sets whether you use the route guidance in unverified areas.
On*1/Off
Traffic Rerouting Sets whether you use automatic recalculation based on traffic information.
On/Off*1
Edit POI Search Radius Along Route
On Freeways/ Highways
Sets the distance from the route to find waypoints.
mile: 1, 2*1, 5, 10mi km: 1.6, 3*1, 8, 16km
On Surface Streets
mile: 1/2*1, 1, 2, 5mi km: 0.8*1, 1.6, 3, 8km
Avoided Area Specifies areas to avoid when calculating a route.
* Not available on all models
uuCustomized Featuresu System
Setu p
19 ACURA ILX NAVI-31TX68600.book 71
*1: Default Setting
Setup Group Customizable Features Description Selectable Settings
Navigation Settings
Guidance
Guidance Volume Adjusts the navigation system volume level.
Guidance Mode Sets whether to display only the map screen or a split map guidance screen.
Map*1/Direction List/ Next Maneuver
Street Name Guidance* Sets whether to read out the street names during voice guidance (U.S. models).
On*1/Off
Non-map Screens Sets whether the guidance screen interrupts the screen display.
On/Off*1
Guidance Point Sets whether to display the guidance information to the destination or the next waypoint.
Destination*1/Next Point
Estimated Time Sets whether to display the remaining time or arrival time to the guidance point.
Arrival/Remaining*1
71Continued * Not available on all models
72
uuCustomized Featuresu
System Setu
p
19 ACURA ILX NAVI-31TX68600.book 72
*1: Default Setting
Setup Group Customizable Features Description Selectable Settings
Navigation Settings
Map
Show Icon on Map Selects the icons to display on the map.
Color (Day) Selects the color of the map for the Day mode. White/Beige*1/Blue/ Black
Color (Night) Selects the color of the map for the Night mode. White/Beige/Blue*1/ Black
View Selects the map orientation. North-up*1/Heading- up/3D Map
3D Angle Adjustment Adjusts the viewing angle for the 3D map.
Straight Line Guide Sets whether to display a straight guideline to the destination or waypoint.
On*1/Off
Display Tracking Sets whether to display the tracking dots on the map.
On/Off*1
Delete Tracking Deletes the tracking dots on the map.
Correct Vehicle Position Adjusts the position of the vehicle on the map.
System Device Information Displays database, software, device, and vehicle identification information.
Map Data Update Provides the status of map database updates.
19 ACURA ILX NAVI-31TX68600.book 73
Navigation
This section describes how to enter a destination, select a route to take, and follow the
route to your destination. It also describes how to change your route or destination along
the way.
73
Entering a Destination ........................... 74 Address ................................................. 76 Address Book......................................... 83 Previous Destination............................... 84 Place Category ....................................... 85 Local Search........................................... 87 Place Name............................................ 89 Place Phone Number .............................. 92 Download POI........................................ 93 Scenic Route .......................................... 94 Intersection............................................ 95 Select using Map.................................... 96 Coordinate ............................................ 98
Calculating the Route ..............................99 Viewing the Routes ...............................101
Driving to Your Destination .................102 Viewing the Route ................................102 Listening to Voice Guidance ..................107 Reaching a Waypoint ............................108
Map/Route Menu ..................................109 Displaying the Map/Route Menu ...........109 Current Location...................................112 Map Legend .........................................113 Directions .............................................117 Traffic ReroutingTM ................................119
Changing Your Route ............................122 Pausing the Route.................................123
Canceling the Route............................. 123 Adding Waypoints ............................... 124 Editing the Destination List ................... 130 Taking a Detour ................................... 135 Avoiding Streets ................................... 135
Changing Your Destination ................. 136 Find Nearest Place ................................ 136 Selecting a Destination on the Map...... 137 Entering a New Destination.................. 138
Resuming Your Trip .............................. 139
74
N avig
atio n
19 ACURA ILX NAVI-31TX68600.book 74
Entering a Destination
1 Entering a Destination
If you press when en route, the Map/Route screen is displayed.
2 Map/Route Menu P. 109
Prior to departure, you can set areas along your route to avoid.
2 Avoided Area P. 43
H ENTER/MENU button (on map)
This section describes how to enter a destination for route guidance. Rotate to select an item. Press
.
The following items are available: Go Home: Sets your home address as a destination.
2 Going Home P. 10
Address: Sets a destination by entering an address. 2 Address P. 76
Place Category: Sets a destination by selecting a place/landmark. 2 Place Category P. 85
Previous Destination: Sets a destination by selecting a previous destination. 2 Previous Destination P. 84
Address Book: Sets a destination by selecting an address stored in your Address Book.
2 Address Book P. 83
Place Name: Sets a destination by entering a place name. 2 Place Name P. 89
Local Search: Sets a destination by using Local Search. 2 Local Search P. 87
uuEntering a Destinationu N
avig atio
n
19 ACURA ILX NAVI-31TX68600.book 75
Place Phone Number: Sets a destination by entering the phone number of a place/landmark.
2 Place Phone Number P. 92
Intersection: Sets a destination (intersection) by entering two streets. 2 Intersection P. 95
Download POI: Sets a destination by using a list of the imported POI (category and places) data you created.
2 Download POI P. 93
Select Using Map: Sets a destination by scrolling through the map. 2 Select using Map P. 96
Scenic Route: Sets a destination by using a list of scenic roads for each state or province (U.S. and Canada only).
2 Scenic Route P. 94
Coordinate: Sets a destination by entering latitude and longitude. 2 Coordinate P. 98
Navigation Settings: Sets the personal information and basic navigational preferences.
2 Personal Information P. 24 2 Routing P. 36 2 Map P. 52
75
76
uuEntering a DestinationuAddress
N avig
atio n
19 ACURA ILX NAVI-31TX68600.book 76
Address H ENTER/MENU button u Address
Enter an address to use as the destination. The state (U.S.) or province (Canada) in which you are currently located is displayed (e.g., California).
Rotate to select an item. Press .
The following items are available: City: Selects your destination city.
2 Selecting a City P. 79
Street: Selects your destination street. 2 Selecting a Street P. 80
House Number: Enters the house number to select the street. 2 Selecting a Street by House Number P. 82
ZIP Code (U.S.)/Postal Code (Canada): Enters the zip code or postal code to select the city.
2 Selecting a City by Zip Code or Postal Code P. 78
Change State (U.S.)/Change Province (Canada): Selects the state or province. 2 Selecting the State or Province P. 77
uuEntering a DestinationuAddress N
avig atio
n
1 Selecting the State or Province
Move or to select the following areas: (U.S.) for the U.S. mainland, Alaska, Hawaii,
and Puerto Rico (Canada) (Mexico)
19 ACURA ILX NAVI-31TX68600.book 77
H ENTER/MENU button u Address u Change State/Change Province
Rotate to select a state (U.S.) or province (Canada) from the list. Press
.
Selecting the State or Province
Continued 77
uuEntering a DestinationuAddress
78
N avig
atio n
1 Selecting a City by Zip Code or Postal Code
If your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.
19 ACURA ILX NAVI-31TX68600.book 78
H ENTER/MENU button u Address u ZIP Code/Postal Code
1. Enter the zip code (U.S.) or postal code (Canada) of your destination.
2. Select Search.
3. Rotate to select the destination city from the list. Press
. u Next, you are prompted to
enter a street name. 2 Selecting a Street P. 80
Selecting a City by Zip Code or Postal Code
uuEntering a DestinationuAddress N
avig atio
n
1 Selecting a City
Vehicle position may not be displayed when: The vehicle is traveling off-road. The vehicle position data cannot be updated. You do not need to enter spaces or symbols (e.g., &, -, %). Partial matches are supported (e.g., ANGELES to find LOS ANGELES).
If your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.
19 ACURA ILX NAVI-31TX68600.book 79
H ENTER/MENU button u Address u City
The name of the city where you are currently located is displayed. 1. Enter the name of a different city,
or select Search without entering a letter for the current city.
2. Rotate to select your destination city from the list. Press
. u A list of matching hits is
automatically displayed after you enter several letters, with the closest match at the top of the list. Matching letters are highlighted.
u Next, you are prompted to enter a street name. 2 Selecting a Street P. 80
Selecting a City
Non-detailed area mark: Try entering the street first and then select the city.
Continued 79
uuEntering a DestinationuAddress
80
N avig
atio n
1 Selecting a Street
When entering the names of major freeways/ highways, you can use the following abbreviations. For interstates, use an I (e.g., I-10). For U.S. freeways, use US (e.g., US-18). For state freeways, use the two-character state designation (e.g., CA- 101). For county roads, use the appropriate designation (e.g., G-2). For Trans-Canada and Provincial highways, use Hwy (HWY-7). For County roads, use CR (CR- 32). For Regional Roads, use RR (RR-5).
If you did not select a city first and there is more than one city with the specified street, a list of cities is displayed.
Rotate to select the desired city from the list. Press .
19 ACURA ILX NAVI-31TX68600.book 80
H ENTER/MENU button u Address u Street
1. Enter the name of your destination street. u Do not enter the street type
(e.g., street, road, avenue) or direction (e.g., north, south, east, west).
u Select Search without entering a letter to display a list of streets.
2. Rotate to select your destination street from the list. Press . u A list of matching hits is
automatically displayed after you enter several letters, with the closest match at the top of the list. Matching letters are highlighted.
Selecting a Street
uuEntering a DestinationuAddress N
avig atio
n
19 ACURA ILX NAVI-31TX68600.book 81
3. Enter the street number. u Only valid street numbers can
be entered. 4. Select Search. 5. Set the route to your destination.
2 Calculating the Route P. 99
81Continued
82
uuEntering a DestinationuAddress
N avig
atio n
19 ACURA ILX NAVI-31TX68600.book 82
H ENTER/MENU button u Address u House Number
1. Enter the house number. u Only a valid house number can
be entered. 2. Select Search.
u If you did not yet select a street name, enter a street name when you are prompted.
3. Rotate to select your destination street from the list. Press . u Select a city when you are
prompted. 4. Set the route to your destination.
2 Calculating the Route P. 99
Selecting a Street by House Number
uuEntering a DestinationuAddress Book N
avig atio
n
1 Address Book
If you have PIN-protected your address book, enter your PIN when prompted. Press to select OK. PINs are optional.
2 PIN Numbers P. 32
Move and rotate to select the following items: Add New Address: Adds an entry to the address
book. 2 Adding an Address Book Entry P. 26
Sort: Selects Sort by Name or Sort by Distance. Delete All: Deletes all entries in the address book. Driver 1 or Driver 2: Displays the address book for
the selected user.
19 ACURA ILX NAVI-31TX68600.book 83
Address Book H ENTER/MENU button u Address Book
Select an address stored in your address book to use as the destination. 1. Rotate to select your
destination from the list. Press . 2. Set the route to your destination.
2 Calculating the Route P. 99
u Move or to display only the entries in the categories you have created. 2 Selecting an Address Book
Category P. 29
83
84
uuEntering a DestinationuPrevious Destination
N avig
atio n
1 Previous Destination
If Previous Destination is grayed out, there are no previous destinations entered.
Your home address and addresses stored in your address book are not added to the list of previous destinations.
Rotate to select Delete All to delete all previous destinations.
You can delete unwanted previous destinations from the list.
2 Previous Destination P. 33
19 ACURA ILX NAVI-31TX68600.book 84
Previous Destination H ENTER/MENU button u Previous Destination
Select an address from a list of your 50 most recent destinations to use as the destination. The list is displayed with the most recent destination at the top.
1. Rotate to select a destination from the list. Press .
2. Set the route to your destination. 2 Calculating the Route P. 99
uuEntering a DestinationuPlace Category N
avig atio
n
1 Place Category
This option is convenient if you do not know the exact name of a place or if you want to narrow down the number of matches returned for places with a common name.
Move to select History to access your recently used place categories. Up to 30 categories can be stored.
You can also delete your recently used place categories.
2 Category History P. 34
Search POI Categories helps you to search the subcategory. When you enter a keyword and select OK, the list of appropriate subcategories is displayed.
19 ACURA ILX NAVI-31TX68600.book 85
Place Category H ENTER/MENU button u Place Category
Select the category of a place (e.g., Banking, Lodging, Restaurant) stored in the map database to search for the destination.
1. Rotate to select a category. Press .
2. Rotate to select a subcategory. Press .
85Continued
uuEntering a DestinationuPlace Category
86
N avig
atio n
1 Place Category
The straight line distance (as the crow flies, not driving distance) and direction to the destination are displayed for the highlighted place.
19 ACURA ILX NAVI-31TX68600.book 86
3. Rotate to select an item. Press .
The following items are available: Search by Name: Searches for a place in the subcategory by name. Enter a place
name when prompted. Sort by Distance to Travel: Displays all the places in the subcategory sorted by
distance from your current location. The closest place is displayed at the top. City Vicinity: Searches for a place in the subcategory within a 20 mile (32 km)
radius of a specific city. Enter a city name when prompted and then select a city. 4. Rotate to select a destination
from the list. Press . 5. Set the route to your destination.
2 Calculating the Route P. 99
uuEntering a DestinationuLocal Search N
avig atio
n
1 Local Search
When you select Search by keyword, the list of appropriate categories is displayed.
The screen in this section may differ from the actual ones.
Local Search is a subscription service. For more information, contact an Acura dealer or visit owners.acura.com (U.S.) or www.acura.ca/owners/ acuralink (Canada).
19 ACURA ILX NAVI-31TX68600.book 87
Local Search H ENTER/MENU button u Local Search
Select a place via Local Search database as the destination. 1. Rotate to select a category
(e.g., Community). Press .
2. Rotate to select a subcategory. Press .
87Continued
88
uuEntering a DestinationuLocal Search
N avig
atio n
19 ACURA ILX NAVI-31TX68600.book 88
3. Rotate to select an item. Press .
4. Set the route to your destination. 2 Calculating the Route P. 99
The following items are available: Search nearby: Finds the nearest POI around your vehicle. Search near a point on the map: Selects a POI by scrolling the Interface Dial on
the map screen. Search around destination: Selects a POI around the destination. Search the
category by scrolling the Interface Dial.
uuEntering a DestinationuPlace Name N
avig atio
n
19 ACURA ILX NAVI-31TX68600.book 89
Place Name H ENTER/MENU button u Place Name
Enter the name of a place (e.g., business, hotel, restaurant) stored in the map database to use as the destination.
1. Enter a place name. 2. Select Search to display a list of
matching hits.
3. Rotate to select a place name from the list. Press . u If the place name is in multiple
categories, the categories are displayed when you select it. 2 Place Name in Multiple
Categories P. 90
4. Set the route to your destination. 2 Calculating the Route P. 99
89Continued
uuEntering a DestinationuPlace Name
90
N avig
atio n
1 Place Name in Multiple Categories
Matching letters are highlighted.
19 ACURA ILX NAVI-31TX68600.book 90
If the place name is in multiple categories of the map database, the following screen is displayed.
1. Rotate to select a place name.
Press .
2. Rotate to select a subcategory. Press .
Place Name in Multiple Categories
uuEntering a DestinationuPlace Name N
avig atio
n
1 Place Name in Multiple Categories
Rotate to select Sort by City or Sort by Distance. Press .
19 ACURA ILX NAVI-31TX68600.book 91
3. Rotate to select a place. Press .
4. Set the route to your destination. 2 Calculating the Route P. 99
91
92
uuEntering a DestinationuPlace Phone Number
N avig
atio n
1 Place Phone Number
All 10 digits must be entered.
Phone numbers of private residences entered in your address book are not stored in the database and thus cannot be used when search for a destination.
A list is displayed if there are multiple locations in the database with the same phone number. Rotate to select a place from the list. Press .
19 ACURA ILX NAVI-31TX68600.book 92
Place Phone Number H ENTER/MENU button u Place Phone Number
Select a destination by phone number. Only phone numbers in the database are recognized.
1. Enter the area code and phone number.
2. Select OK. 3. Set the route to your destination.
2 Calculating the Route P. 99
uuEntering a DestinationuDownload POI N
avig atio
n
1 Download POI
Rotate to select Options. The following items are available: Import from USB: Imports POI data into the
navigation system. 2 Importing POI Categories P. 35
Delete All: Deletes all POI entries. Help with Feature: Views tips for the Download
POI feature.
If you select From AcuraLink, you can download POI data stored on the AcuraLink server.
19 ACURA ILX NAVI-31TX68600.book 93
Download POI H ENTER/MENU button u Download POI
Select a place imported into the navigation system as the destination. 1. Rotate to select a category
from the list. Press .
2. Rotate to select a place. Press .
3. Set the route to your destination. 2 Calculating the Route P. 99
93
94
uuEntering a DestinationuScenic Route
N avig
atio n
1 Scenic Route
If you select a scenic road that runs through multiple states (U.S.) or provinces (Canada), only the portion of the road in the selected state or province is displayed.
19 ACURA ILX NAVI-31TX68600.book 94
Scenic Route H ENTER/MENU button u Scenic Route
Select a scenic road as a destination (U.S. and Canada only). 1. Rotate to select a state/
province. Press .
2. Rotate to select a scenic road. Press .
3. Set the route to your destination. 2 Calculating the Route P. 99
uuEntering a DestinationuIntersection N
avig atio
n
1 Intersection
It is usually easier to select Street to find the streets first. The city or cities that the streets are in will be displayed. If you select City and your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.
If the intersection is outside the state (U.S.) or province (Canada) you are currently in, rotate to select Change State/Change Province.
2 Selecting the State or Province P. 77
If there is more than one intersection, you are prompted to select the intersection. If the two streets that you have selected do not intersect, no intersection is entered.
19 ACURA ILX NAVI-31TX68600.book 95
Intersection H ENTER/MENU button u Intersection
Select the intersection of two streets as the destination. The state (U.S.) or province (Canada) for your current location is displayed at the top of the screen (e.g., California).
1. Rotate to select the intersection search method. Press
. 2. Set the route to your destination.
2 Calculating the Route P. 99
The following options are available: City: Selects the city where the intersection is located. You are prompted to enter
the name of the two intersecting streets. 2 Selecting a City P. 79
Street: Selects the two intersecting streets. The city or cities that the streets are located in are displayed.
2 Selecting a Street P. 80
Change State (U.S.)/Change Province (Canada): Selects the state or province. 2 Selecting the State or Province P. 77
95
96
uuEntering a DestinationuSelect using Map
N avig
atio n
19 ACURA ILX NAVI-31TX68600.book 96
Select using Map H ENTER/MENU button u Select Using Map
Use the Interface Dial to manually select an icon or a location on the map screen as the destination. You are prompted to define the map area to display.
1. Rotate to select an item. Press .
The following items are available: Current Position: Your current location is centered on the map. City: You are prompted to select the city.
2 Selecting a City P. 79
State (U.S.)/Province (Canada): You are prompted to select the state or province.
2 Selecting the State or Province P. 77
USA, Canada and Mexico: Your current location is displayed on a map of the country.
uuEntering a DestinationuSelect using Map N
avig atio
n
1 Select using Map
Auto Zoom Press repeatedly on the map to zoom in (to the scale 1/4 mile (400 m)) while scrolling the map.
Information icons are displayed at scales from 1 mile to 1/4 mile (1.6 km to 400 m). Place/landmark icons are displayed at 1/8 mile (200 m) or less. Roads are displayed at 1/4 mile (400 m) or less.
If you select multiple icons within the cursor radius, you are prompted to select one of the items from a list.
2 Selecting a Destination on the Map P. 137
19 ACURA ILX NAVI-31TX68600.book 97
2. Scroll the map to position the cursor over your desired destination, adjusting the map scale as necessary. u If the address is not the desired
location, scroll the map to another location and try again.
3. Press to display the route calculation menu.
2 Calculating the Route P. 99
4. Rotate to select Set as Destination. Press .
97
98
uuEntering a DestinationuCoordinate
N avig
atio n
1 Coordinate
At least two digits must be entered into each field (degrees, minutes, seconds) when inputing the coordinates.
19 ACURA ILX NAVI-31TX68600.book 98
Coordinate H ENTER/MENU button u Coordinate
Specify a location using latitude and longitude map coordinates. 1. Enter the latitude and select OK. 2. Enter the longitude and select OK.
3. Scroll the map to position the cursor over your desired destination, adjusting the map scale as necessary. u If the address is not the desired
location, scroll to another location and try again.
4. Press to display the route calculation menu.
2 Calculating the Route P. 99
5. Rotate to select Set as Destination. Press .
19 ACURA ILX NAVI-31TX68600.book 99
Calculating the Route
avig atio
n
1 Calculating the Route
The straight line distance (as the crow flies, not driving distance) and direction to the destination are displayed.
You cannot use voice commands while the system is calculating the route.
Search Nearby You can find the nearest place/landmark (e.g., nearest gas station) by specifying a category.
2 Find Nearest Place P. 136
Call You can place a telephone call to the destination phone number. See your Owners Manual.
Save to Address Book You can add the destination address to the address book.
2 Adding an Address Book Entry P. 26
Edit/Delete Entry You can edit or delete the address book entry.
2 Editing an Address Book Entry P. 29 2 Deleting an Address Book Entry P. 30
This section describes how to calculate your route. 1. Rotate to select Set as
Destination. Press . u The system calculates and
displays the route line on the map screen.
2 Route Line P. 104
u Move to scroll the map around the destination.
The following options are available: Route Preference: Changes the route preferences (calculating method).
2 Route Preference P. 37
View Routes: Displays three different routes. 2 Viewing the Routes P. 101
99Continued
uuCalculating the Routeu
100
N avig
atio n
1 Calculating the Route
Edit Home Entry You can edit your home address entry.
2 Home Address P. 31
More Information You can view detailed information about the destination.
19 ACURA ILX NAVI-31TX68600.book 100
2. Follow the route guidance to your destination.
2 Driving to Your Destination P. 102
u The system provides you with pop-up messages if your route passes through unverified areas, avoid areas, or areas with traffic restrictions.
uuCalculating the RouteuViewing the Routes N
avig atio
n
1 Viewing the Routes
It is not unusual for some calculated route options to be identical.
Server Routes is a subscription service. For more information, contact an Acura dealer or visit www.acura.ca/owners/acuralink.
Canadian models
19 ACURA ILX NAVI-31TX68600.book 101
Viewing the Routes View three different routes to your destination.
Rotate to select a route. Press .
u The travel distance and estimated travel time is displayed for each route.
u The system calculates and displays the route line on the map screen.
2 Route Line P. 104
Using the Server Route*
The following items are available: Quick: Displays the route with the shortest travel time. Direct: Displays the route with the shortest travel distance. Eco: Displays the route with the best fuel efficiency.
101* Not available on all models
102
N avig
atio n
19 ACURA ILX NAVI-31TX68600.book 102
Driving to Your Destination
1 Viewing the Route
You can change the map scale by rotating .
If you scroll the map while en route, the time and distance to destination indicators are replaced with an indicator displaying the distance from the current vehicle position.
You can display only the map screen or a split map- guidance screen.
2 Guidance Mode P. 46
This section describes how to follow the route guidance to your destination, receive traffic information and choose the icons displayed on the map screen.
Viewing the Route
After calculating the route to your destination, the route is displayed on the map screen.
2 Map Screen Legend P. 8
As you drive, the system tracks your position on the map in real time and provides guidance as you approach each guidance point on the route.
2 During Route Guidance P. 9
Map Screen
uuDriving to Your DestinationuViewing the Route N
avig atio
n
1 Guidance Screen
A visual guide helps you check the guidance screen. 2 Guidance Screen P. 9
Turn-by-Turn Directions The next guidance point appears on the multi- information display.
2 Turn-by-Turn Directions P. 9
You can turn this feature on or off using the multi- information display. See the Owners Manual for instructions.
19 ACURA ILX NAVI-31TX68600.book 103
The guidance screen offers an alternative way to view your route. u The next guidance point is
displayed as you approach each guidance point on the route.
u You can also view a list of guidance directions.
Guidance Screen
Continued 103
uuDriving to Your DestinationuViewing the Route
104
N avig
atio n
1 Route Line
You can set Unverified Routing to Off to follow your own route to the destination. If Unverified Routing is On, be aware that unverified streets may not be displayed accurately.
2 Unverified Routing P. 39
The route line may also consist of red, orange, or green segments when traffic information is displayed.
2 Traffic Information*/AcuraLink Real-Time TrafficTM* P. 13
2 Traffic ReroutingTM P. 119
19 ACURA ILX NAVI-31TX68600.book 104
When driving on verified streets, the route line is light blue. The route line display changes when driving on unverified streets:
If Unverified Routing is Off, the route line uses verified streets only (when possible). If Straight Line Guide is set to On, a pink vector line pointing directly towards your destination is displayed.
2 Straight Line Guide P. 61
If Unverified Routing is On, the route line changes to a blue-pink line to indicate that the route line uses unverified streets.
Route Line
Straight line guide
Blue-pink route line
* Not available on all models
uuDriving to Your DestinationuViewing the Route N
avig atio
n
19 ACURA ILX NAVI-31TX68600.book 105
If you leave the calculated route, the system automatically recalculates a route to the desired destination based on your current location and direction.
2 Route Preference P. 37
Deviating From the Planned Route
105Continued
uuDriving to Your DestinationuViewing the Route
106
N avig
atio n
1 Tracking Dots
A message Not on a Digitized Road may appear when you drive 1/2 mile (800 m) away from a mapped road.
Breadcrumbs may occasionally be displayed in urban areas, such as large parking lots in shopping malls, in new subdivisions where the roads are not yet in the database, or in areas where a GPS signal is unavailable, such as in a parking garage.
Breadcrumbs are limited to approximately 150 miles (240 km). Breadcrumbs at the beginning of the trail are deleted if you exceed that distance.
Breadcrumbs are displayed only at 1/20, 1/8, 1/4, and 1/2 mile (80, 200, 400, and 800 m) map scales.
19 ACURA ILX NAVI-31TX68600.book 106
You can display a series of dots (breadcrumbs) to track the path you are taking. If needed, you can follow the dots back to the mapped road you originally left.
2 Display Tracking P. 62
Tracking Dots
uuDriving to Your DestinationuListening to Voice Guidance N
avig atio
n
1 Listening to Voice Guidance
You can turn voice guidance OFF if you prefer. Press the SETTINGS button. Select System Settings and set Guidance Volume to 0. You can also adjust Guidance Volume by rotating the volume knob while the route guidance or voice command confirmations are announced.
When driving in unverified areas, the phrase if possible is inserted before each voice guidance prompt.
Repeat Guidance in the Map/Route menu may be grayed out if: The system is in process of gathering the route
guidance information. The vehicle is out of the road (e.g., pulling in a
parking lot).
The timing of voice guidance varies depending on the type of road you are on and the distance to the next guidance point.
19 ACURA ILX NAVI-31TX68600.book 107
Listening to Voice Guidance As you approach each guidance point, a pop-up window is displayed on the map screen with instructions for you to follow. Voice guidance for each guidance point is also provided. Typically, you hear three prompts: 1/2 mile (800 m) from the guidance point (2 miles (3 km) on freeway/highway) 1/4 mile (400 m) from the guidance point (1 mile (1.5 km) on freeway/highway) Just before the guidance point To replay voice guidance, press and rotate to select Repeat Guidance in the Map/Route menu. If you select Repeat Guidance between guidance points, voice guidance for the next guidance point is provided.
107
108
uuDriving to Your DestinationuReaching a Waypoint
N avig
atio n
19 ACURA ILX NAVI-31TX68600.book 108
Reaching a Waypoint When you reach a waypoint, a pop-up message is displayed. You can continue or pause the route guidance.
Rotate to select No to pause the route guidance. Press . u Select Yes to continue the guidance.
You can resume the route guidance in the following ways: Restart the engine after you stop your vehicle (e.g., to rest, stop for gas, etc.).
2 Resuming Your Trip P. 139
Select Resume Guidance from the navigation menu or the Map/Route menu. 2 Map/Route Menu P. 109 2 Changing Your Route P. 122
Resuming the Route Guidance
19 ACURA ILX NAVI-31TX68600.book 109
Map/Route Menu
avig atio
n
1 Map/Route Menu
If you scroll the map while en route, press the NAV (or BACK) button to return to the current position map screen, then press .
Displaying the Map/Route Menu Use the Map/Route menu to control the icons displayed on the screen and to display traffic information and messages. You can also use the Map/Route menu to find locations or to cancel the route.
1. On the map screen, press . u When en route, the Map/
Route menu is displayed on the map screen.
u When not en route, move to select Map/Route.
2. Rotate to select an item. Press .
109Continued
uuMap/Route MenuuDisplaying the Map/Route Menu
110
N avig
atio n
1 Map/Route Menu
Directions The system provides freeway/highway exit information only in the U.S.
Traffic Incidents You must be in or near a traffic-enabled city to receive coverage for that area. Traffic information is available in certain areas in the lower 48 states.
2 Traffic Information P. 156
You must have an AcuraLink Real-Time TrafficTM subscription to receive traffic information. See your Owners Manual for subscription information.
The incident icons are displayed on the 5 mile (8 km) or less map scale.
2 Map Scale and Functions P. 114
Canadian models
19 ACURA ILX NAVI-31TX68600.book 110
The following items are available: Repeat Guidance: Select to replay the voice guidance when en route.
2 Listening to Voice Guidance P. 107
Cancel Route: Cancels the route guidance. 2 Canceling the Route P. 123
Pause Guidance: Pauses your current route. 2 Pausing the Route P. 123
Resume Guidance: Resumes your current route. This item is displayed while the route guidance is paused.
View Routes: Displays three different routes to your destination. 2 Viewing the Routes P. 101
Directions: Displays a list of the guidance points. 2 Directions P. 117
Detour: Calculates a detour route. 2 Taking a Detour P. 135
Avoid Streets: Avoids streets along your route. 2 Avoiding Streets P. 135
Exit Information: 2 Freeway/Highway Exit Information P. 118
Destination List: Shows a list of waypoints. You can delete waypoints or edit the order of them.
2 Editing the Destination List P. 130
Search Nearby: Allows you to find the nearest place/landmark (e.g., nearest gas station) by specifying a category. You can then add the location to the list of destinations, set as a waypoint, or set as your destination.
2 Find Nearest Place P. 136
Current Location: Displays information about your current location. 2 Current Location P. 112
uuMap/Route MenuuDisplaying the Map/Route Menu N
avig atio
n
19 ACURA ILX NAVI-31TX68600.book 111
Traffic Incidents: Displays a list of the traffic incidents around your current location or on your current route.
2 Traffic ReroutingTM P. 119
Map Legend: Displays an overview of the map lines, areas, routes, traffic information, and navigation icons.
2 Map Legend P. 113
Navigation Settings: Allows you to select the map and guidance settings (display mode, icons to display on the map, map orientation, map color, and 3D view angle).
2 Guidance Mode P. 46 2 Showing Icons on Map P. 54 2 Color P. 56 2 View (Map Orientation) P. 59 2 3D Angle Adjustment P. 60
111
112
uuMap/Route MenuuCurrent Location
N avig
atio n
1 Current Location
If you have PIN-protected your address book, enter your PIN when prompted. Select OK. PINs are optional.
2 PIN Numbers P. 32
The elevation is not displayed if the system is receiving insufficient GPS information. When elevation is displayed, it may differ with roadside elevation signs by 100 ft (30 m) or more.
Saving your current location does not change or cancel your current route.
19 ACURA ILX NAVI-31TX68600.book 112
Current Location H ENTER/MENU button (on map) u Map/Route u Current Location
Display and save your current location for future use as a destination. The address, latitude, longitude, and elevation of your current location are displayed.
To save your current location in the address book: 1. Press to select Address Book.
u Move to scroll the map as necessary.
2. Edit the name, phone number, and category.
2 Address Book P. 25
3. Rotate to select Save / Delete. Press .
4. Rotate to select Save. Press .
uuMap/Route MenuuMap Legend N
avig atio
n
1 Map Legend
A visual guide helps you see the map legend. 2 Map Screen Legend P. 8 2 Traffic Information*/AcuraLink Real-Time
TrafficTM* P. 13
19 ACURA ILX NAVI-31TX68600.book 113
Map Legend H ENTER/MENU button (on map) u Map/Route u Map Legend
Display an overview of the map lines, areas, routes, traffic information, and navigation icons.
Move or to select an item. u The system displays the map
legend.
113Continued * Not available on all models
uuMap/Route MenuuMap Legend
114
N avig
atio n
1 Map Scale and Functions
You can change between mile or km. See your Owners Manual.
19 ACURA ILX NAVI-31TX68600.book 114
The functions that are available from the map screen depend on the map scale.
Map Scale and Functions
Function page
Map Scale (top: mile, bottom: metric)
1/20 1/8 1/4 1/2 1 2 5 15 50 150 350 1000
80 200 400 800 1.6 3.2 8 24 80 240 560 1600
Icon display
Landmark icon 8
Exit info. 8
One-way traffic
8
Waypoint flag
9
Traffic incident 13
Map orientation
Heading-up 59
North-up 59
3D map 59
Others
Tracking dots 106
Unverified road 8
Map features 8
Avoid areas 43
Traffic speed 13
uuMap/Route MenuuMap Legend N
avig atio
n
1 Map Icons and Functions
Icon display control Icons that can be displayed or hidden using the Interface Dial or voice command.
Icon selectable Icons that can be selected as a destination using the Interface Dial.
Icon searchable Icons that can be searched using the Find Nearest voice command.
19 ACURA ILX NAVI-31TX68600.book 115
Display or hide all icons on the map screen, with the exception of Honda/Acura Dealer icons which are always displayed.
Landmark icon
Map Icons and Functions
Type Icon display
control Icon selectable Icon searchable
Honda/Acura dealer Always on Yes Yes
Hospital Yes Yes Yes
School Yes Yes Yes
ATM Yes Yes Yes
Gas station Yes Yes Yes
Restaurants Yes Yes Yes
Post office Yes Yes Yes
Grocery store Yes Yes Yes
Hotel/Lodging Yes Yes Yes
Police station No icon No Yes
Shopping, Tourist attraction, Bank
No icon No Yes
Parking garage Yes Yes Yes
Parking lot Yes Yes Yes
Freeway/Highway exit info.
Yes Yes N/A
Continued 115
uuMap/Route MenuuMap Legend
116
N avig
atio n
1 Traffic icon
When you use the Interface Dial to position the cursor (round red circle) over the traffic incident icon, you can view the summary of the incident.
Press on the traffic incident icon to view a pop-up message describing the incident in detail.
19 ACURA ILX NAVI-31TX68600.book 116
Traffic icon
Type Icon display
control Icon selectable Icon searchable
Traffic incident Yes No N/A
uuMap/Route MenuuDirections N
avig atio
n
1 Directions
The system provides freeway/highway exit information only in the U.S.
The route guidance information is automatically deleted when you reach your destination.
19 ACURA ILX NAVI-31TX68600.book 117
Directions H ENTER/MENU button (on map) u Map/Route u Directions
Display a list of the guidance points on your route for your confirmation. 1. Rotate to select a guidance
point from the list. Press . u The system displays a map of
the guidance point.
2. Press to select Back to the List or press the BACK button to return to the previous screen.
117Continued
uuMap/Route MenuuDirections
118
N avig
atio n
1 Freeway/Highway Exit Information
You can scroll the map and select a (Freeway/ Highway exit information) icon on the map screen to display the Freeway/Highway exit information. The
icon is only displayed if there is exit information available.
Icons are displayed only at 1/4, 1/2, or 1 mile (400 m, 800 m, or 1.6 km) scale.
2 Map Scale and Functions P. 114
The system provides freeway/highway exit information only in the U.S.
The route guidance information is automatically deleted when you reach your destination.
19 ACURA ILX NAVI-31TX68600.book 118
H ENTER/MENU button (on map) u Map/Route u Exit Information
Display a list of the Freeway/highway exits for the route. You can view freeway/high way exit information (whether the exit is near gas stations, restaurants, ATMs, etc.) and add new destinations or waypoints to the calculated route.
1. Rotate to select an exit from the list. Press .
2. Rotate to select a list item. Press . u Move or to display
information for different exits. u You can set the route to your
destination. 2 Calculating the Route P. 99
Freeway/Highway Exit Information
uuMap/Route MenuuTraffic ReroutingTM N
avig atio
n
1 Traffic ReroutingTM
Traffic information is only available in certain areas.
Automatic traffic rerouting may not provide a detour route depending on circumstances.
The route is recalculated only when Traffic Rerouting is set to On.
2 Traffic Rerouting P. 41
This feature requires an AcuraLink Real-Time TrafficTM subscription. AcuraLink Real-Time TrafficTM is a subscription service. For more information, contact an Acura dealer or www.acura.ca/owners/acuralink.
Canadian models
19 ACURA ILX NAVI-31TX68600.book 119
Traffic ReroutingTM
When driving to your destination, the system automatically searches for a faster route based on traffic flow information and traffic incidents.
2 Traffic Information*/AcuraLink Real-Time TrafficTM* P. 13 2 Traffic Rerouting P. 41
119Continued * Not available on all models
uuMap/Route MenuuTraffic ReroutingTM
120
N avig
atio n
1 Traffic ReroutingTM Manually
You can choose to avoid up to 10 traffic incidents. It is not always possible for the system to calculate a route that avoids all traffic incidents or specific traffic incidents you select.
The On Route tab on the Traffic List screen is only available during route guidance.
You cannot select an incident to avoid from the All tab.
You can also detour around a traffic incident manually if you encounter an unexpected obstacle.
2 Taking a Detour P. 135
19 ACURA ILX NAVI-31TX68600.book 120
H ENTER/MENU button (on map) u Map/Route u Traffic Incidents
Manually avoid specific incidents and/or congestion on your route: 1. Rotate to select an incident
from the list. Press . u The system displays the map
screen and the incident location.
2. Rotate to select Avoid. Press .
u Repeat step 1 to 2 as necessary.
Traffic ReroutingTM Manually
uuMap/Route MenuuTraffic ReroutingTM N
avig atio
n
19 ACURA ILX NAVI-31TX68600.book 121
3. Rotate to select Recalculate Route. Press . u The system recalculates a
detour route that avoids the traffic incidents.
121
122
N avig
atio n
19 ACURA ILX NAVI-31TX68600.book 122
Changing Your Route
1 Changing Your Route
If you press when not en route, the Destination menu screen is displayed.
2 Entering a Destination P. 74
H ENTER/MENU button (when en route)
This section describes how to alter your route, add an interim waypoint (pit stop), choose a different destination, cancel your current destination, and continue your trip after stopping.
Rotate to select an item. Press . 2 Map/Route Menu P. 109
uuChanging Your RouteuPausing the Route N
avig atio
n
1 Pausing the Route
You can also pause your route from the Map/Route menu.
2 Map/Route Menu P. 109
19 ACURA ILX NAVI-31TX68600.book 123
Pausing the Route H ENTER/MENU button (when en route) u Pause Guidance
Pause the route guidance and return to the map screen. The destination icons and all waypoint flags remain displayed on the map. Press when en route and select Resume Guidance to resume the route guidance.
Canceling the Route H ENTER/MENU button (when en route) u Cancel Route
Cancel the route guidance and remove the destination and all waypoints from the destination list. The system then returns to the map screen.
123
124
uuChanging Your RouteuAdding Waypoints
N avig
atio n
1 Adding Waypoints
Waypoints are places where you can stop for food, gas, etc. on your way to your destination.
Press the NAV button to return to the map screen without adding a waypoint at any time.
The search radius used for adding waypoints can be adjusted.
2 Edit POI Search Radius Along Route P. 42
You can delete waypoints or edit the order of waypoints in the destination list.
2 Editing the Destination List P. 130
19 ACURA ILX NAVI-31TX68600.book 124
Adding Waypoints Add up to four waypoints (pit stops) along the route to your destination.
Waypoints are displayed on the map screen as small, numbered red flags. The route follows the waypoints in the order they are listed in the Destination List.
uuChanging Your RouteuAdding Waypoints N
avig atio
n
1 Adding Waypoints from the Map/Route Menu
Search method
Search around method
Search along method 2 mi (3 km)
19 ACURA ILX NAVI-31TX68600.book 125
H ENTER/MENU button (when en route) u Destination List u Add New Destination u Find Along Route
1. Rotate to select a search method to add a waypoint. Press
.
Search Around: Searches in a spiral pattern around the location you select. Search Along: Searches within a corridor on either side of the location you
select. 2. Rotate to select a waypoint
category (e.g., GAS STATION). Press .
Adding Waypoints from the Map/Route Menu
Continued 125
126
uuChanging Your RouteuAdding Waypoints
N avig
atio n
19 ACURA ILX NAVI-31TX68600.book 126
3. Rotate to select a place. Press .
u The waypoint is added to the Destination List.
4. Rotate to select a location and move the order of destinations. Press .
5. Rotate to select Options. Press .
uuChanging Your RouteuAdding Waypoints N
avig atio
n
19 ACURA ILX NAVI-31TX68600.book 127
6. Rotate to select Start Route. Press . u The route is automatically
recalculated and displayed on the map screen.
127Continued
uuChanging Your RouteuAdding Waypoints
128
N avig
atio n
1 Adding Waypoints from the Navigation Menu
You can edit the order of waypoints and destination. 2 Editing the Destination List P. 130
19 ACURA ILX NAVI-31TX68600.book 128
H ENTER/MENU button (when en route) u Destination List u Add New Destination u Use Navigation Menu
1. Rotate to select a method to enter a waypoint.
2 Entering a Destination P. 74
u A new destination is added to the end of the Destination list.
2. Rotate to select Options. Press .
Adding Waypoints from the Navigation Menu
uuChanging Your RouteuAdding Waypoints N
avig atio
n
19 ACURA ILX NAVI-31TX68600.book 129
3. Rotate to select Start Route. Press . u The route is automatically
recalculated and displayed on the map screen.
129
130
uuChanging Your RouteuEditing the Destination List
N avig
atio n
1 Editing the Order of Waypoints
Select Show All on Map to display the destination and waypoints on the map screen.
19 ACURA ILX NAVI-31TX68600.book 130
Editing the Destination List
H ENTER/MENU button (when en route) u Destination List
1. Rotate to select Options. Press .
2. Rotate to select Edit Order. Press .
Editing the Order of Waypoints
uuChanging Your RouteuEditing the Destination List N
avig atio
n
19 ACURA ILX NAVI-31TX68600.book 131
3. Rotate to select a list item to move. Press .
4. Rotate to select a new location. Press .
5. Rotate to select Options. Press .
6. Rotate to select Start Route. Press . u The route is automatically
recalculated and displayed on the map screen.
131Continued
uuChanging Your RouteuEditing the Destination List
132
N avig
atio n
1 Deleting Waypoints
Select Show on Map to display the waypoint on the map screen.
19 ACURA ILX NAVI-31TX68600.book 132
H ENTER/MENU button (when en route) u Destination List
1. Rotate to select a list item to delete. Press .
2. Rotate to select Delete. Press .
3. Rotate to select Yes. Press .
Deleting Waypoints
uuChanging Your RouteuEditing the Destination List N
avig atio
n
19 ACURA ILX NAVI-31TX68600.book 133
H ENTER/MENU button (when en route) u Destination List
1. Rotate to select Options. Press .
2. Rotate to select Delete All. Press .
Deleting All Waypoints
133Continued
134
uuChanging Your RouteuEditing the Destination List
N avig
atio n
19 ACURA ILX NAVI-31TX68600.book 134
3. Rotate to select Yes. Press .
uuChanging Your RouteuTaking a Detour N
avig atio
n
1 Taking a Detour
The detour option is convenient if you encounter an unexpected obstacle such as a road closure or extremely heavy traffic congestion.
1 Avoiding Streets
Avoiding certain streets is convenient if you know of road construction, road closures, or excessive traffic along the route.
You cannot choose specific streets you want to use, only those to avoid. However, you can select intersections or waypoints (places/landmarks) that the system will use in your route.
2 Adding Waypoints P. 124
You can store up to 10 streets to avoid. You cannot avoid your current street or the streets of your waypoint(s) or destination (system beeps if selected).
19 ACURA ILX NAVI-31TX68600.book 135
Taking a Detour H ENTER/MENU button (when en route) u Detour
Calculate a detour route manually. The system attempts to calculate a new route by avoiding the next 5 miles (8 km) (while on a freeway/highway) or 1 mile (1.6 km) (while on a surface street).
Avoiding Streets H ENTER/MENU button (when en route) u Avoid Streets
Select a street or streets along your route to avoid. 1. Rotate to select the street you
want to avoid. Press . u Repeat the procedure to avoid
other streets.
2. Rotate to select Recalculate Route. Press . u The system calculates a new
route.
135
136
N avig
atio n
19 ACURA ILX NAVI-31TX68600.book 136
Changing Your Destination
There are several methods you can use to change the route destination.
Find Nearest Place H ENTER/MENU button (on map) u Map/Route u Search Nearby
Search for the nearest place/landmark on the map screen and set it as your destination.
1. Rotate to select a category type. Press .
2. Rotate to select a place. Press .
3. Rotate to select Set as Destination. Press .
4. Rotate to select Clear Current Route. Press . u The route is automatically
recalculated and displayed on the map screen.
u Rotate to edit the order to set the location as a new waypoint. Press .
uuChanging Your DestinationuSelecting a Destination on the Map N
avig atio
n
1 Selecting a Destination on the Map
If there is more than one icon or street under the map cursor, you are prompted to select the item from a list. Rotate to select an item. Press .
19 ACURA ILX NAVI-31TX68600.book 137
Selecting a Destination on the Map Select a new destination when en route by selecting a location on the map.
1. Scroll the map to position the cursor over your desired destination, adjusting the map scale as necessary. Press . u If the address displayed is not
the desired location, press the BACK button and repeat the procedure.
2. Rotate to select Set as Destination. Press .
2 Calculating the Route P. 99
3. Rotate to select Clear Current Route. Press . u The route is automatically
recalculated and displayed on the map screen.
u Rotate to edit the order to set the location as a new waypoint. Press .
137
138
uuChanging Your DestinationuEntering a New Destination
N avig
atio n
19 ACURA ILX NAVI-31TX68600.book 138
Entering a New Destination H ENTER/MENU button (when en route) u Destination
Enter a new destination using the Destination menu screen even when you are en route.
1. Rotate to select a method to enter a new destination.
2 Entering a Destination P. 74
u After entering a new destination, the address is displayed on the searched location screen.
2. Rotate to select Set as Destination. Press .
3. Rotate to select Clear Current Route. Press . u The route is automatically
recalculated and displayed on the map screen.
u Rotate to edit the order to set the location as a new waypoint. Press .
19 ACURA ILX NAVI-31TX68600.book 139
Resuming Your Trip
avig atio
n
1 Resuming Your Trip
The Continue Trip screen has the same options as when you calculate a route.
2 Calculating the Route P. 99
You can also cancel your destination by pressing any hard button except the button.
Search Nearby You can find the nearest place/landmark (e.g., nearest gas station) by specifying a category.
2 Find Nearest Place P. 136 Call You can place a telephone call to the destination phone number. See your Owners Manual. Save to Address Book You can add the destination address to the address book.
2 Adding an Address Book Entry P. 26 Edit/Delete Entry You can edit or delete the address book entry.
2 Editing an Address Book Entry P. 29 2 Deleting an Address Book Entry P. 30
Edit Home Entry You can edit your home address entry.
2 Home Address P. 31 More Info You can view detailed information about the destination.
Stop your vehicle en route (e.g., to rest, stop for gas, etc.), and then continue on your route. If you did not complete your route, the Continue Trip screen is displayed when you restart your vehicle.
Rotate to select Set as Destination. Press . u You can continue on the same
route. u Move to scroll the map
around the destination. u Press the BACK button to cancel
your destination.
The following items are available:
Route Preference: Rotate to select Route Preference to change the route preferences (calculating method).
2 Route Preference P. 37
View Routes: Displays three different routes. 2 Viewing the Routes P. 101
139
140
19 ACURA ILX NAVI-31TX68600.book 140
19 ACURA ILX NAVI-31TX68600.book 141
Troubleshooting
41
Troubleshooting ................................... 142 Map, Voice, Entering Destinations........ 142 Traffic .................................................. 144 Guidance, Routing ............................... 145 Update, Coverage, Map Errors ............. 147 Display, Accessories.............................. 147 Miscellaneous Questions ...................... 147
Error Messages...................................... 148 Navigation System................................ 148
142
Tro u
b lesh
o o
tin g
19 ACURA ILX NAVI-31TX68600.book 142
Troubleshooting
ution
n screen reminds you and your guest system in a safe manner. The Startup
rtain period of time and the top screen of
peratures or shock from bumpy roads, and . If this happens frequently, please see a
es are lumped in with a major metro area. bdivisions, streets may be missing or only
rom the map.
avigation Settings > Personal Info to
ystem Settings > Feedback and check 0. o. and set Voice Prompt to On.
HandsFreeLink or, if paired, your phone
ir onto the microphone on the ceiling, the re using the correct command when
Map, Voice, Entering Destinations
Problem Sol
The Startup Confirmation screen is displayed every time I start the vehicle.
This is normal. The Startup Confirmatio drivers to always operate the navigation Confirmation screen goes off after a ce the last mode is displayed.
The navigation system reboots by itself (returns to the opening screen).
A reboot can be caused by extreme tem does not necessarily indicate a problem dealer.
How do I specify a destination when an entered city or street could not be found?
Try entering the street first. Some citi In rural unverified areas or new su partially numbered.
Try selecting the destination directly f 2 Select using Map P. 96
How do I delete Personal Addresses, Previous Destinations, or the Home Address?
1. Press the SETTINGS button. Select N display the types of information.
2. Select the type of address to delete. 2 Address Book P. 25 2 Home Address P. 31 2 Previous Destination P. 33
I cannot hear the navigation system voice. 1. Press the SETTINGS button. Select S that Guidance Volume is not set to
2. Select System Settings > Voice Rec
Why is Call grayed out on the Calculate Route screen?
Your phone is not paired to Bluetooth is in use. See your Owners Manual.
The voice control system is having difficulty recognizing my voice commands.
Check that the vents are not blowing a vehicle is as quiet as possible, and you a speaking.
2 Voice Recognition P. 23
uuTroubleshootinguMap, Voice, Entering Destinations Tro
u b
lesh o
o tin
g
p Confirmation screen.
rtain onscreen functions and features are moving. Use voice commands or pull over
-recorded voice, but street names are voice. Consequently, the name may be es.
brightness control is not set to maximum. avigation Settings > Map > Color
igation Settings > Map > Color (Day).
vigation Settings > Personal Info > PIN Home PIN. e the choice to change or remove the PIN.
ution
19 ACURA ILX NAVI-31TX68600.book 143
I cannot give voice commands. Make sure you pressed at the Startu 2 Start-up P. 20
I cannot select an option using the Interface Dial.
To reduce potential driver distraction, ce limited or inoperable while the vehicle is to proceed.
The navigation system pronunciation of street names in the guidance command or destination address sounds strange.
The basic guidance phrases use a studio pronounced using a machine-generated mispronounced or sound strange at tim
The screen is bright when I drive at night. 1. Check that the nighttime dashboard 2. Press the SETTINGS button. Select N
(Night). 2 Color P. 56
The screen is dark when I drive during the day.
Press the SETTINGS button. Select Nav 2 Color P. 56
How do I change or remove my PIN? 1. Press the SETTINGS button. Select Na Number > Address Book PIN or Go
2. Enter your existing PIN. You then hav 2 PIN Numbers P. 32
I have forgotten my PIN. How do I reset the PIN for Home or the PIN for personal addresses?
A dealer must reset the PIN for you.
Problem Sol
143
144
uuTroubleshootinguTraffic
Tro u
b lesh
o o
tin g
Solution
dicator is available on the map screen. raLink Real-Time TrafficTM* P. 13 clear signal. If signal strength is low, traffic data
e turned on. . 54 ption status*1. See your Owners Manual. hnical problem in your metropolitan area. Call if there is an outage. ontact Information P. 154 ur Acura dealer for assistance. only in certain areas.
n, the navigation system provides a detour route find a significantly faster route than the original
hich route should be faster based on freeway/ route. Use your own experience to determine uld be faster.
ect Navigation Settings > Routing, and set
19 ACURA ILX NAVI-31TX68600.book 144
Traffic
*1: Canadian models
Problem
Traffic information is missing or is not displaying properly. What is wrong?
Check that the traffic status in 2 Traffic Information*/Acu
Traffic information relies on a may not be available.
Check that the traffic icons ar 2 Showing Icons on Map P
Check the AcuraLink subscri There may be a temporary tec
Acura Client Relations to see 2 Acura Client Relations C
If the situation persists, see yo Traffic information is available
The navigation system sometimes provides a detour route when I am driving a route on the freeway/ highway.
If Traffic Rerouting is set to O to your destination only if it can one.
2 Traffic Rerouting P. 41
The navigation system routes me to an exit and an alternate freeway/highway with unknown flow speeds or surface streets.
The navigation system predicts w highway congestion along your whether the alternate route wo
How can I ignore the detour route and return to the original route?
Press the SETTINGS button. Sel Traffic Rerouting to Off.
2 Traffic Rerouting P. 41
* Not available on all models
uuTroubleshootinguGuidance, Routing Tro
u b
lesh o
o tin
g
Solution
to generate the optimal route. You can change n calculating a route.
ct Navigation Settings > Routing, and set
tly undergoing revision. You can access the most et.
located in the dashboard) is not blocked. For best the dashboard, such as radar detectors, mobile
arket devices can interfere with the GPS
rified area.
ct Navigation Settings > Map > View > North-
wer traffic, the navigation system updates the your actual road speed to give you a better
19 ACURA ILX NAVI-31TX68600.book 145
Guidance, Routing
Problem
The navigation system does not route me the same way I would go or the same way as other mapping systems.
The navigation system attempts the route preferences used whe
2 Route Preference P. 37
The navigation system wants to route me around potential traffic problems. How do I stop these pop- up messages?
Press the SETTINGS button. Sele Traffic Rerouting to Off.
2 Traffic Rerouting P. 41
The street Im on is not shown on the map screen. The mapping database is constan recent information on the intern
2 Map Coverage P. 155
The vehicle position icon is not following the road and the GPS icon text in the upper left hand corner of the screen is white or missing.
Check that the GPS antenna ( reception, remove items from phones, or loose articles.
Metallic tinting or other afterm reception. Please consult a dealer.
2 GPS P. 152
The blue highlighted route and voice guidance stopped or turned into a blue/pink line before I got to my destination.
Your route has entered an unve 2 Unverified Routing P. 39
How do I stop the map from rotating as I drive along?
Press the SETTINGS button. Sele up.
The time to destination display sometimes increases even though I am getting closer to my destination.
If your speed reduces due to slo time to destination based on estimate of arrival time.
145
146
uuTroubleshootinguGuidance, Routing
Tro u
b lesh
o o
tin g
stem is unaware of the width of intersections. tion can indicate a temporary loss of the GPS
mbs. These are displayed if Display Tracking is
ect Navigation Settings > Map, set Display e Tracking to remove the white dots from the
avoid, make sure to select sections of roads that .
vary 100 ft (30 m) due to GPS calculation
the GPS antenna can receive signals from at least hicle into an open area. The elevation is also not
tion is zero or below sea level.
Solution
19 ACURA ILX NAVI-31TX68600.book 146
The vehicle position icon on the map lags a short distance behind, especially when I arrive at an intersection.
This is normal. The navigation sy Large differences in vehicle posi signal.
2 GPS P. 152
The screen is showing white dots as I drive along. These dots are called breadcru set to On.
2 Display Tracking P. 62
How do I remove the white dots (breadcrumbs) from my screen?
Press the SETTINGS button. Sel Tracking to Off or select Delet map.
2 Display Tracking P. 62
A road that I selected to avoid is being used when routing.
When you draw your area to include at least one intersection
2 Avoided Area P. 43
My elevation (shown when I display the current position) seems to fluctuate even though my elevation has not changed.
This is normal. The elevation can errors.
2 GPS P. 152
My elevation is missing on the current position screen.
The elevation is only displayed if four satellites. Try moving the ve displayed if the calculated eleva
Problem
uuTroubleshootinguUpdate, Coverage, Map Errors Tro
u b
lesh o
o tin
g
Solution
tly undergoing revision. You can access the most et.
aps for the 50 U.S. states, Canada, Puerto Rico, em will not work in other countries.
in a large database. If you encounter major errors,
Solution
ecome brighter after a few minutes.
Solution
press and hold the (Power) button for two tivate. If you have installed an aftermarket system,
19 ACURA ILX NAVI-31TX68600.book 147
Update, Coverage, Map Errors
Display, Accessories
Miscellaneous Questions
Problem
My city is not part of a fully verified detailed coverage area.
The mapping database is constan recent information on the intern
2 Map Coverage P. 155
Does the navigation system work outside North America?
The navigation system contains m and Mexico. The navigation syst
2 Map Coverage P. 155
How do I report errors I find in the database? Minor errors are bound to occur see a dealer.
2 Visiting Your Dealer P. 154
Problem
The display appears dim when starting the vehicle in really cold weather.
This is normal. The display will b
Problem
My battery was disconnected or went dead and the navigation system is asking for a code.
Set the power mode to ON, and seconds. The system should reac contact a dealer.
147
148
Tro u
b lesh
o o
tin g
19 ACURA ILX NAVI-31TX68600.book 148
Error Messages
Solution
en the display temperature is too high. The the display cools down. The system turns back on cools down.
ulty reading the HDD when the temperature is C). The navigation system starts up automatically
w atmospheric pressure. Move your vehicle to the essure is high.
ulty reading the HDD when the temperature is ts up automatically when the system cools down.
failed with a cause other than low temperature, spheric pressure. After a short wait, try to operate t solve the problem, consult with the dealer.
Navigation System
Error Message
The display temperature is too high. For protection, the system will shut off until the display cools down.
This message appears briefly wh navigation system turns off until automatically when the display
The navigation system temperature is too low. For protection, the system will shut off until the it warms up.
The navigation system has diffic below approximately -22F (-30 when the display warms up.
The navigation system atmospheric pressure is too low. For protection, the system will shut off until the pressure returns to safe levels.
The HDD is inoperable due to lo place where the atmospheric pr
The navigation system temperature is too high. For protection, the system will shut off until it cools down.
The navigation system has diffic high. The navigation system star
HDD access error. Please consult your dealer. Writing of the data to the HDD high temperature, and low atmo the system again. If this does no
HDD access error. The system will reset and attempt to correct the problem.
19 ACURA ILX NAVI-31TX68600.book 149
Reference Information
49
System Initialization ..............................150 Entering the Security Code....................150 Acquiring GPS Information....................150 Startup Confirmation Screen.................151 Map Matching ......................................151
System Limitations ................................152 GPS ......................................................152 Address Calculation ..............................152 Database ..............................................152
Client Assistance ....................................154 Resolving Problems ...............................154 Acura Client Relations Contact Information...154 Visiting Your Dealer ..............................154 Map Coverage ......................................155
1
Obtaining a Navigation Update ............ 155 Traffic Information ............................... 156 Operation in Alaska, Hawaii, Canada, Puerto Rico, and Mexico ...................................... 156
Legal Information ................................. 157 Copyrights ........................................... 157 User Agreements ................................. 157 As required by the FCC ........................ 161
150
R eferen
ce In fo
rm atio
n
19 ACURA ILX NAVI-31TX68600.book 150
System Initialization
The navigation system must be initialized if power to the navigation system is interrupted for any reason (e.g., the battery was disconnected).
Entering the Security Code In most cases, you do not need to enter a security code. Follow the steps below to reactivate the system.
1. Set the power mode to ON, and turn on the audio system.
2. Press and hold the (Power) button for more than two seconds. u The system is reactivated when the
systems control unit recognizes that the system is in your vehicle.
If the control unit fails to recognize, you must go to a dealer and have the system checked.
Acquiring GPS Information Depending on the length of time the power was interrupted, your system may require GPS initialization.
If initialization is not necessary, the system proceeds directly to the Startup Confirmation screen. If the system fails to locate a sufficient number of satellites to locate your position within 10 minutes, the following screen is displayed.
If you are experiencing GPS reception problems:
2 GPS P. 152
uuSystem InitializationuStartup Confirmation Screen R
eferen ce In
fo rm
atio n
19 ACURA ILX NAVI-31TX68600.book 151
Startup Confirmation Screen The Startup Confirmation screen is displayed when initialization has successfully completed. It is displayed every time you start your vehicle. Press to continue.
Map Matching Map matching is the process of using the acquired GPS information to locate your position on the map screen. If you are on a mapped road, the name of the road is displayed along the bottom of the map screen when map matching is completed. Do not enter a destination until the road name is displayed. The system may initially show your location on a different street (e.g., in urban areas where streets are close together), show an incorrect elevation, or delay the display of the vehicle position icon at intersections. This is normal; the system will correct itself while you drive.
151
152
R eferen
ce In fo
rm atio
n
19 ACURA ILX NAVI-31TX68600.book 152
System Limitations
GPS The signals received from GPS satellites are extremely weak (less than a millionth of the strength of a local FM station) and require an unobstructed view of the sky. GPS antenna is located in the dashboard. The signal reception can easily be interrupted or interfered with by the following: Metallic window tint on the front or side
windows Mobile phones, PDAs, or other electronic
devices docked in a cradle or lying loose on the dashboard
Remote starters or hidden vehicle tracking systems mounted near the navigation unit
Audio electronic devices mounted near the navigation unit
Trees, tall buildings, freeway/highway overpasses, tunnels, or overhead electrical power wires
GPS is operated by the U.S. Department of Defense. For security reasons, there are certain inaccuracies built into GPS for which the navigation system must constantly compensate. This can cause occasional positioning errors of up to several hundred feet or tens of meters.
Address Calculation The destination icon shows only the approximate location of a destination address. This occurs if the number of possible addresses is different from the number of actual addresses on a block. For example, the address 1425 on a 1400 block with 100 possible addresses (because it is followed by the 1500 block) will be shown a quarter of the way down the block by the system. If there are only 25 actual addresses on the block, the actual location of address 1425 would be at the end of the block.
Database The digitized map database reflects conditions as they existed at various points in time before production. Accordingly, your database may contain inaccurate or incomplete data or information due to the passage of time, road construction, changing conditions, or other causes. For example, some places/landmarks may be missing when you search the database because the name was misspelled, the place was improperly categorized, or a place/ landmark is not yet in the database. This is also true for police stations, hospitals, and other public institutions. Do not rely on the navigation system if you need law enforcement or hospital services. Always check with local information sources. In addition, the map database contains verified and unverified areas. Unverified streets may be missing from the map, in the wrong location, or have an incorrect name or address range. A message will warn you if your route includes unverified streets. Exercise additional caution when driving in unverified areas.
uuSystem LimitationsuDatabase R
eferen ce In
fo rm
atio n
19 ACURA ILX NAVI-31TX68600.book 153
The database does not include, analyze, process, consider, or reflect any of the following categories of information: Neighborhood quality or safety Population density Availability or proximity of law
enforcement Emergency, rescue, medical, or other
assistance Construction work, zones, or hazards Road and lane closures Legal restrictions (such as vehicular type,
weight, load, height, and speed restrictions)
Road slope or grade Bridge height, width, weight, or other
limits Traffic facilities safety Special events Pavement characteristics or conditions Every effort has been made to verify that the database is accurate. The number of inaccuracies you experience increases the longer you go without obtaining an updated map database.
2 Obtaining a Navigation Update P. 155
We assume no liability for any incident that may result from an error in the program, or from changed conditions not noted above.
153
154
R eferen
ce In fo
rm atio
n
19 ACURA ILX NAVI-31TX68600.book 154
Client Assistance
Resolving Problems If you run into a specific issue that you cannot resolve, consult the following help resources: For navigation system issues:
2 Troubleshooting P. 142
There are also FAQs available online at acuranavi.navigation.com/acura-na (U.S.) or www.acuranavi.ca (Canada).
For traffic-related issues: 2 Traffic P. 144
For reporting issues with the database or places/landmarks:
2 Visiting Your Dealer P. 154
Call Acura Client Relations. 2 Acura Client Relations Contact
Information P. 154
Acura Client Relations Contact Information Acura Navi American Honda Motor Co., Inc. Acura Client Services Mail Stop 100-5E-8F 1919 Torrance Blvd. Torrance, CA 90501-2746 Telephone: (800) 382-2238
Honda Canada Inc. Acura Client Services 180 Honda Boulevard Markham, L6C 0H9, ON E-Mail: acura_cr@ch.honda.com Telephone: (888) 9-ACURA-9 Hours: 8:00 am to 7:30 pm Monday to Friday (Eastern time)
Visiting Your Dealer If you have a question that you cannot resolve using the available help resources, you can consult a dealer. Please identify the specific issue (e.g., error occurs when you enter a specific address, when driving on a certain road, or just when its cold) so that the service technician can refer the issue to the factory so that a solution can be found. Be patient, the service technician may be unfamiliar with your specific issue.
uuClient AssistanceuMap Coverage R
eferen ce In
fo rm
atio n
19 ACURA ILX NAVI-31TX68600.book 155
Map Coverage The navigation system provides map coverage for the United States, Canada, Puerto Rico, and Mexico. The map coverage consists of accurately mapped (verified) metropolitan areas and a less accurate (unverified) rural database. Note that unverified areas are constantly being reviewed and converted to verified areas each year.
Map coverage update information is available from Acura Client Relations or online at acuranavi.navigation.com/acura- na (U.S.) or www.acuranavi.ca (Canada).
To find navigation system update information: 1. Visit the website. 2. Enter your vehicle model and model year. 3. The most current version of the Navi DVD
Update will be listed, or you will be asked for your Database version number.
Obtaining a Navigation Update Acura is continually expanding the scope of the navigation system. Navigation system software upgrades may be made available periodically, usually in the fall of each year. To purchase an update: 1. Obtain your vehicles VIN number and the
System/Device Information. 2 System Device Information P. 65
2. Call the Acura Navigation Disc Fulfillment Center at (888) 549-3798 or order online at acuranavi.navigation.com/acura-na (U.S.) or www.acuranavi.ca (Canada).
An update is not available from a dealer. However, the dealer may assist you in obtaining one for you out of courtesy. There is no program for free updates.
155
156
uuClient AssistanceuTraffic Information
R eferen
ce In fo
rm atio
n
19 ACURA ILX NAVI-31TX68600.book 156
Traffic Information Continuously updated traffic information is available in certain areas across the lower 48 U.S. states, Hawaii, and some cities in Canada.
Visit https://coverage.here.com/hd- coverage.html for a complete listing of coverage areas and other information.
Visit www.acura.ca/owners/acuralink to find traffic information.
U.S. models
Canadian models
Operation in Alaska, Hawaii, Canada, Puerto Rico, and Mexico
All roads displayed on the map screens are verified roads. Information in this manual relating to unverified roads or areas is not applicable.
Entering a destination address or place/ landmark on another island may result in a screen caution message. This is because there are no ferry routes between islands in the database.
If Street Name Guidance is set to On, the street names will not be read out by voice guidance. This may change in a future data update.
Map Coverage
Address and Place Entry Screens
Puerto Rico and Mexico
19 ACURA ILX NAVI-31TX68600.book 157
Legal Information
eferen ce In
fo rm
atio n
Copyrights Infogroup-Data: Certain business data
provided by Infogroup 2011, All Rights Reserved.
EXIT-Data: ZENRIN CO., LTD. 2011. All rights reserved.
Building foot print: ZENRIN CO., LTD. 2011. All rights reserved.
Junction View Data: ZENRIN USA, INC. 2011. All rights reserved.
Brand icon: The marks of companies displayed by this product to indicate business locations are the marks of their respective owners. The use of such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product.
User Agreements
In using this HDD Satellite Linked Navigation System (the HDD), which includes HONDA MOTOR CO., LTD. software, ALPINE ELECTRONICS, INC. software, and Here database contents (hereinafter referred to as Licensors), you are bound by the terms and conditions set forth below. By using your copy of the HDD, you have expressed your Agreement to the terms and conditions of this Agreement. You should, therefore, make sure that you read and understand the following provisions. If for any reason you do not wish to be bound by the terms of this Agreement, please return the HDD to your dealer. The HDD may not be copied, duplicated,
or otherwise modified, in whole or in part, without the express written permission of the Licensors.
The HDD may not be transferred or sublicensed to any third party for profit, rent or loan, or licensed for reuse in any manner.
Navigation System User Agreement
The HDD may not be decompiled, reverse engineered or otherwise disassembled, in whole or in part.
The HDD may not be used in a network or by any other manner of simultaneous use in multiple systems.
The HDD is intended solely for personal use (or internal use where the end-user is a business) by the consumer. The HDD is not to be used for commercial purposes.
The Licensors do not guarantee to the client that the functions included in the HDD meet the specific objectives of the user.
Licensor shall not be responsible for any damages caused by the use of the HDD to the actual user or to any third party.
The warranty on the HDD shall not extend to an exchange or refund due to misspelling, omission of letters, or any other cosmetic discrepancy in the contents of the HDD.
The right to use the HDD shall expire either when the user destroys the HDD or software, or when any of the terms of this Agreement are violated and the Licensors exercise the option to revoke the license to use the HDD or software.
157Continued
158
uuLegal InformationuUser Agreements
R eferen
ce In fo
rm atio
n
19 ACURA ILX NAVI-31TX68600.book 158
The terms and conditions hereof apply to all subsequent users and owners as well as to the original purchaser.
The logos of oil companies, hotels, convenience stores, and other businesses are displayed for your information and convenience, and in no way imply any sponsorship, approval or endorsement of these companies, or their products. The logos are trademarks of their respective owners.
The marks of companies displayed by this product to indicate business locations are the marks of their respective owners.
The use of such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product.
The user shall indemnify and save harmless the Licensors, and their officers, employees and agents, from and against any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action, alleging loss, costs, expense, damages or injuries (including injuries resulting in death) arising out of the use or possession of the HDD or software. Use, duplication, or disclosure of this HDD by or on behalf of the United States
government is subject to Restricted Rights as set forth at FAR 52.227-14, -19 or DFARS 252.227-7013, as applicable. Manufacturers are the Licensors, including HONDA MOTOR CO., LTD., 2-1-1 Minami Aoyama Minato-Ku Tokyo 107-8556 JAPAN., Alpine Electronics, Inc., 20-1 Yoshima Kogyodanchi, Iwaki, Fukushima 970-1192 JAPAN., Here Corporation, 425 W Randolph St. Chicago, IL 60606, USA.
You have acquired a device (DEVICE) that includes software licensed by Alpine Electronics, Inc. (collectively ALPINE) from an affiliate of Microsoft Corporation (collectively MS). Those installed software products of MS origin, as well as associated media, printed materials, and online or electronic documentation (SOFTWARE) are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved. IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (EULA), DO NOT USE THE DEVICE OR COPY THE SOFTWARE INSTEAD, PROMPTLY CONTACT ALPINE
Navigation System END USER LICENSE AGREEMENT
FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT). GRANT OF SOFTWARE LICENSE
This EULA grants you the following license: You may use the SOFTWARE only on the DEVICE.
NOT FAULT TOLERANT THE SOFTWARE IS NOT FAULT TOLERANT. ALPINE HAS INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS HAS RELIED UPON ALPINE TO CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE SOFTWARE IS SUITABLE FOR SUCH USE.
NO WARRANTIES FOR THE SOFTWARE THE SOFTWARE is provided AS IS and with all faults. THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY, AND EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU. ALSO, THERE IS NO WARRANTY AGAINST INTERFERENCE WITH YOUR ENJOYMENT
uuLegal InformationuUser Agreements R
eferen ce In
fo rm
atio n
19 ACURA ILX NAVI-31TX68600.book 159
OF THE SOFTWARE OR AGAINST INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR SOFTWARE THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON, MS.
NO LIABILITY FOR CERTAIN DAMAGES. EXCEPT AS PROHIBITED BY LAW, MS, MICROSOFT CORPORATION AND THEIR AFFILIATES SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS, MICROSOFT CORPORATION AND/OR THEIR AFFILIATES BE LIABLE FOR ANY AMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S.$250.00).
SPEECH RECOGNITION If the SOFTWARE includes speech recognition component(s), you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process. Neither ALPINE nor its suppliers
shall be liable for any damages arising out of errors in the speech recognition process.
LIMITATIONS ON REVERSE ENGINEERING, DECOMPILATION, AND DISASSEMBLY You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.
ADDITIONAL SOFTWARE/SERVICES The SOFTWARE may permit ALPINE, MS, Microsoft Corporation or their affiliates to provide or make available to you SOFTWARE updates, supplements, add- on components, or Internet-base service components of the SOFTWARE after the date you obtain your initial copy of the SOFTWARE (Supplemental Components). u If ALPINE provides or makes available
to you Supplemental Components and no other EULA terms are provided along with the Supplemental Components, then the terms of this EULA shall apply.
u If MS, Microsoft Corporation or their affiliates make available Supplemental Components, and no other EULA terms are provided, then the terms of this EULA shall apply, except that MS, Microsoft Corporation or affiliate entity providing the Supplemental Component(s) shall be licensor of the Supplemental Component(s).
u ALPINE, MS, Microsoft Corporation and their affiliates reserve the right to discontinue any Internet-based services provided to you or made available to you through the use of the SOFTWARE.
RECOVERY MEDIA If SOFTWARE is provided by ALPINE on separate media and labeled Recovery Media you may use the Recovery Media solely to restore or reinstall the SOFTWARE originally installed on the DEVICE.
UPGRADES If the SOFTWARE is provided by ALPINE separate from the DEVICE on separate media or via web download or other means, and is labeled For Upgrade Purposes Only you may install one (1) copy of such SOFTWARE onto the
159Continued
160
uuLegal InformationuUser Agreements
R eferen
ce In fo
rm atio
n
19 ACURA ILX NAVI-31TX68600.book 160
DEVICE as a replacement copy for the existing SOFTWARE, and use it in accordance with this EULA, including any additional EULA terms accompanying the upgrade SOFTWARE.
TERMINATION Without prejudice to any other rights, ALPINE or MS may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE and all of its component parts.
INTELLECTUAL PROPERTY RIGHTS All title and intellectual property rights in and to the SOFTWARE (including but not limited to any images, photographs, animations, video, audio, music, text and applets, incorporated into the SOFTWARE), the accompanying printed materials, and any copies of the SOFTWARE, are owned by MS, Microsoft Corporation, their affiliates or suppliers. The SOFTWARE is licensed, not sold. You may not copy the printed materials accompanying the SOFTWARE. All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE is the
property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All rights not specifically granted under this EULA are reserved by MS, Microsoft Corporation, their affiliates and suppliers. Use of any on-line services which may be accessed through the SOFTWARE may be governed by the respective terms of use relating to such services. If this SOFTWARE contains documentation that is provided only in electronic form, you may print one copy of such electronic documentation.
TRADEMARKS This EULA does not grant you any rights in connection with any trademarks or service marks of ALPINE MS, Microsoft Corporation, their affiliates or suppliers.
PRODUCT SUPPORT Product support for the SOFTWARE is not provided by MS, its parent corporation Microsoft Corporation, or their affiliates or subsidiaries. For product support, please refer to ALPINE support number
provided in the documentation for the DEVICE. Should you have any questions concerning this EULA, or if you desire to contact ALPINE for any other reason, please refer to the address provided in the documentation for the DEVICE.
SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS You may permanently transfer rights under this EULA only as part of a permanent sale or transfer of the Device, and only if the recipient agrees to this EULA. If the SOFTWARE is an upgrade, any transfer must also include all prior versions of the SOFTWARE.
EXPORT RESTRICTIONS You acknowledge that SOFTWARE is of US-origin. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and country destination restrictions issued by U.S. and other governments. For additional information on exporting the SOFTWARE, see http:// www.microsoft.com/exporting/.
uuLegal InformationuAs required by the FCC R
eferen ce In
fo rm
atio n
19 ACURA ILX NAVI-31TX68600.book 161
As required by the FCC 1. This device complies with Part 15 of the
FCC Rules and Canadian RSS-210/ RSSGen. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2. The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the party responsible for compliance may void the users authority to operate the equipment.
3. This product emits radio frequency energy, but the radiated output power of this device is far below the FCC and IC radio frequency exposure limits. This equipment complies with FCC and IC RF radiation exposure limits set forth for an uncontrolled environment. Nevertheless, the device should be used in such a manner that the potential for human contact with the antenna during normal operation is minimized.
161
162
19 ACURA ILX NAVI-31TX68600.book 162
19 ACURA ILX NAVI-31TX68600.book 163
Voice Commands
63
Voice Commands .................................. 164 Voice Portal Screen .............................. 164 Navigation Commands for Find Nearest..... 164
164
V o
ice C o
m m
an d
s
19 ACURA ILX NAVI-31TX68600.book 164
Voice Commands
Voice Portal Screen
The screen changes the navigation screen. Address (English only)*1
Place Name (English only)*1
Find Nearest Go Home Previous Destination Back Cancel
*1: U.S. models only
Navigation
Navigation Commands for Find Nearest The system only accepts these commands on the Find Nearest screen in Navigation.
Find Nearest (specify place): Fuel Auto All Types Fuel Auto ACURA Dealers HONDA Dealers Gas Station Hydrogen Station Auto Parts & Electronics Auto Repair & Maintenance Car Wash & Detailing Motorcycle Dealers Other Car Dealers Roadside Assistance ATM Bank All Types ATM Bank ATM Bank Check Cashing Currency Exchange Lodging
Find Place Commands
All Types Lodging Bed & Breakfast Hotel Resort Recreation All Types Recreation Amusement Park Golf Course Historical Monument Marina Movie Theater Museum Park Performing Arts Sports Complex Tourist Attraction Community All Types Community Business City Hall Civic Center Convention Center Court House Higher Education Library Post Office School Restaurant
uuVoice CommandsuNavigation Commands for Find Nearest V
o ice C
o m
m an
d s
19 ACURA ILX NAVI-31TX68600.book 165
All Types Restaurant American Restaurant Californian Restaurant Chinese Restaurant Coffee Shop Continental Restaurant Fast Food French Restaurant German Restaurant Greek Restaurant Indian Restaurant Italian Restaurant Japanese Restaurant Korean Restaurant Mexican Restaurant Pizza Seafood Restaurant Thai Restaurant Vegetarian Restaurant Vietnamese Restaurant Other Restaurant Travel All Types Travel Airport Automobile Club Bus Station Camping Commuter Rail Station
Ferry Terminal Named Place Park & Ride Parking Garage Parking Lot Rental Car Agency Rest Area Ski Area Tourist Information Train Station Travel Agency Truck Stop Shopping All Types Shopping Accessory Store Book Store Clothing Store Grocery Store Home Improvement Store Mall Office Supply Store Pharmacy Pet Food Store Sewing Store Shoe Store Sporting Goods Store Toy Store Emergency
All Types Emergency Hospital Police Station Veterinarian
165
Index
166
In d
ex
19 ACURA ILX NAVI-31TX68600.book 166
Index
A Acura Client Relations .............................. 154 Address........................................................ 76
Address Book ............................................ 25 Avoided Area............................................. 43
Address Book Editing Address Book................................. 25 Setting Destination .................................... 83
Address Book PIN........................................ 32 Avoid Streets............................................. 135 Avoided Area .............................................. 43
C Calculating the Route................................. 99 Cancel Route ............................................. 123 Category
Address Book ............................................ 25 Setting Destination .................................... 85
Category History ......................................... 34 Change Province ......................................... 77 Change State............................................... 77 Changing Your Destination ..................... 136 Changing Your Route............................... 122 City............................................................... 79 Client Assistance ....................................... 154 Color ............................................................ 56
Continue Trip............................................ 139 Coordinate .................................................. 98 Correct Vehicle Position............................. 64 Current Location ...................................... 112 Current Position
Address Book ............................................ 25 Select using Map....................................... 96
Customized Features .................................. 66
D Day Mode
Color......................................................... 56 Switching Display Mode ............................ 57
Delete Tracking .......................................... 63 Destination List
Adding Waypoint .................................... 124 Editing .................................................... 130
Detour ....................................................... 135 Directions.................................................. 117 Display Tracking ......................................... 62
Driving .................................................... 106 Download POI
Editing Category ....................................... 35 Importing Category ................................... 35 Setting Destination.................................... 93
Driving to Your Destination .................... 102
E Edit Go Home ............................................. 31 Edit POI Search Radius Along Route ......... 42
ENTER/MENU Button ................................... 6 Changing Route...................................... 122 Entering a Destination............................... 74
Error Messages ......................................... 148 Navigation System .................................. 148
Estimated Time .......................................... 51 Exit Info .................................................... 118
F Find Nearest Place.................................... 136
G Go Home .................................................... 10 Go Home PIN .............................................. 32 Guidance (Navigation Settings) ................ 45 Guidance Mode.......................................... 46 Guidance Point........................................... 50
H Home Address ...................................... 10, 31 House Number ........................................... 82
I Interface Dial................................................ 6 Intersection ................................................ 95
In d
ex
19 ACURA ILX NAVI-31TX68600.book 167
L Legal Information .................................... 157 Lodging (Place Category) .......................... 85
M Map (Navigation Settings) ........................ 52 Map Data Update
Obtaining Update Data ........................... 155 Map Legend ......................................... 8, 113 Map Screen............................................... 102
Changing View ......................................... 59 Icon .................................................... 8, 115 Scale....................................................... 114
Map/Route Menu ..................................... 109
N NAV Button ............................................ 9, 46 Navigation Menu (Destination) ................ 74 Navigation Menu (Route Option) ........... 122 Night Mode
Color ........................................................ 56 Switching Display Mode............................ 57
Non-map Screens ....................................... 49
P Personal Information ................................. 24 PIN Numbers............................................... 32 Place Category
Address Book............................................ 25
Setting Destination .................................... 85 Place Name
Address Book ............................................ 25 Setting Destination .................................... 89
Place Phone Number Address Book ............................................ 25 Setting Destination .................................... 92
Postal Code ................................................. 78 Previous Destinations
Address Book ............................................ 25 Deleting .................................................... 33 Setting Destination .................................... 84
R Resuming Your Trip.................................. 139 Route Preference ........................................ 37 Routing ....................................................... 36
S Scenic Route................................................ 94 Search Along............................................. 125 Search Around .......................................... 125 Search by Name .......................................... 86 Search by name
Place Category .......................................... 85 Search Nearby ........................................... 136 Security PIN Code ..................................... 150 Select using Map
Setting Destination .................................... 96 SETTINGS Button .......................................... 4
Show Icon on Map ..................................... 54 Sort by Distance to Travel.......................... 85 Start-up ....................................................... 20 Straight Line Guide .................................... 61 Street........................................................... 80 Street Name Guidance ............................... 48 System Initialization................................. 150 System Limitations ................................... 152
T Traffic Incidents........................................ 120 Traffic List ................................................. 120 Traffic Rerouting ...................................... 119
Auto Reroute .......................................... 119 Navigation Settings ................................... 41
Troubleshooting................................. 15, 142
U Unverified Routing..................................... 39 Update System Software
Obtaining Update Data ........................... 155
V View (Navigation Settings) ........................ 59 View Routes.............................................. 101 Viewing the Routes.................................. 101 Voice
Map Menu.............................................. 107
167
168
In d
ex
19 ACURA ILX NAVI-31TX68600.book 168
Voice Commands Voice Commands List .............................. 164 Voice Control System................................. 22 Voice Help ................................................. 14
Voice Control Operation Basic Operation ........................................... 5 Voice Portal ................................................. 5
Volume Map/Route Menu .................................... 109
W Waypoint
Adding .................................................... 124 Editing..................................................... 130
Z Zip Code ...................................................... 78
Related manuals for Acura ILX 2021 Sedan Navigation Manual
Manualsnet FAQs
If you want to find out how the ILX Acura works, you can view and download the Acura ILX 2021 Sedan Navigation Manual on the Manualsnet website.
Yes, we have the Navigation Manual for Acura ILX as well as other Acura manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Navigation Manual should include all the details that are needed to use a Acura ILX. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Acura ILX 2021 Sedan Navigation Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Acura ILX 2021 Sedan Navigation Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Acura ILX 2021 Sedan Navigation Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Acura ILX 2021 Sedan Navigation Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Acura ILX 2021 Sedan Navigation Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.