Contents

Acura RLX Sport Hybrid Climate Control 2017 Sedan Instruction Manual PDF

Download download
Acura RLX Sport Hybrid Climate Control 2017 Sedan Instruction Manual PDF
Acura Manual Acura Sedan Manual Acura Climate Control Manual Acura RLX Sport Hybrid Manual Acura Sedan Instruction Manual
Pages 3
Year 2017
Language(s)
English en
1 of 3
1 of 3

Summary of Content for Acura RLX Sport Hybrid Climate Control 2017 Sedan Instruction Manual PDF

Page 1

42 | | 43

VEHICLE CONTROLSVEHICLE CONTROLS

HomeLink Garage Opener Program your vehicle to operate up to three remote-controlled devices around your homesuch as garage doors, lighting, or home security systemsusing the buttons on the ceiling.

Training a Button

Park near the system you want to program, and follow the instructions in the flowchart below.

To retrain a button or erase codes, see the Owners Manual on the Owner Information CD or at owners.acura.com (U.S.) or www.myacura.ca (Canada). If you need help, call HomeLink at (800) 355-3515 or visit www.homelink.com.

Press and hold the button on the remote and the HomeLink button at the same time. Then, while continuing to hold the HomeLink button, press and release the button on the remote every 2 seconds. Does the LED blink at a faster rate within 20 seconds?

Press and hold the HomeLink button again.

Training complete

YESNO

HomeLink indicator ashes for 2 seconds, then remains on.

HomeLink LED remains on.YESNO

YESNO

1

Press and hold the desired HomeLink button and the button on the remote transmitter. Does the HomeLink indicator (LED) blink at a faster rate after about 10 seconds?

2

a The remote has a rolling code. Press the learn button on the remote-controlled device (e.g., garage door opener).

Press the programmed HomeLink button again; the remote-controlled device should operate.

Within 30 seconds, press and hold the programmed HomeLink button for 2 seconds.

a

Press and hold the programmed HomeLink button for about a second. Does the device (garage door opener) work?

3

b

4

5

Position the remote transmitter you wish to link 1-3 inches (3-8 cm) from the HomeLink button you want to program.

Indicator

HomeLink buttons

Climate Control System Set your preferred interior temperature by selecting the proper mix of heated or cooled air and fan speed. Use the On-Demand Multi-Use Display (ODMD) or buttons to operate the system.

Recirculation/ fresh air mode

Drivers side temperature control

On-Demand Multi-Use Display (ODMD) When you select a climate control icon, a new screen appears where you can make adjustments or change settings.

Drivers side vent mode

A/C: Turn the air conditioning on or off. SYNC: Set the passengers side temperature to the same as the drivers side.

Fan speed

Passengers side temperature control

Shortcuts (Climate tab): Store or select two climate control settings.

Windshield defroster button

Drivers side temperature switch

Climate control buttons

ON/OFF button

AUTO button: Press, then adjust the temperature to your preferred setting.

Rear window defogger/heated mirror button

Passengers side temperature switch

Passengers side vent mode

Page 2

44 | | 45

VEHICLE CONTROLSVEHICLE CONTROLS

*if equipped

Rear Temperature Control Dial

Adjust the rear temperature control dial to set the rear passenger temperature differently than the front passengers.

Heated Steering Wheel*

Heat the steering wheel to a comfortable temperature when the vehicle is on.

Press the heated steering wheel button. Press the button again to turn it off.

Power Rear Sunshade*

Press the button on the ceiling to raise or lower the sunshade when the vehicle is on. There is also a button on the back of the center console.

Opening or closing the sunshade on someones hands or fingers can cause serious injury.

Make sure all hands and fingers are clear of the sunshade before opening or closing it.

WARNING

Seat Heaters and Ventilation* Quickly warm or cool the seats when the vehicle is on.

Front Seat Heaters or Ventilation*

Press the seat heater or ventilation button in the front console. An indicator (red for seat heater, blue for seat ventilation) appears for the selected setting.

Once: HI setting (three indicators)

Twice: MID setting (two indicators)

Three times: LO setting (one indicator)

Four times: OFF setting (no indicators)

Rear Seat Heaters*

Press the seat heater button on the back of the center console. An indicator appears for the selected setting.

Once: HI setting (three indicators)

Twice: MID setting (two indicators)

Three times: LO setting (one indicator)

Four times: OFF setting (no indicators)

Heat-induced burns are possible when using seat heaters.

Persons with a diminished ability to sense temperature (e.g., persons with diabetes, lower-limb nerve damage, or paralysis) or with sensitive skin should not use the seat heaters.

WARNING

*if equipped

Temperature dial

Page 3

44 | | 45

VEHICLE CONTROLSVEHICLE CONTROLS

*if equipped

Rear Temperature Control Dial

Adjust the rear temperature control dial to set the rear passenger temperature differently than the front passengers.

Heated Steering Wheel*

Heat the steering wheel to a comfortable temperature when the vehicle is on.

Press the heated steering wheel button. Press the button again to turn it off.

Power Rear Sunshade*

Press the button on the ceiling to raise or lower the sunshade when the vehicle is on. There is also a button on the back of the center console.

Opening or closing the sunshade on someones hands or fingers can cause serious injury.

Make sure all hands and fingers are clear of the sunshade before opening or closing it.

WARNING

Seat Heaters and Ventilation* Quickly warm or cool the seats when the vehicle is on.

Front Seat Heaters or Ventilation*

Press the seat heater or ventilation button in the front console. An indicator (red for seat heater, blue for seat ventilation) appears for the selected setting.

Once: HI setting (three indicators)

Twice: MID setting (two indicators)

Three times: LO setting (one indicator)

Four times: OFF setting (no indicators)

Rear Seat Heaters*

Press the seat heater button on the back of the center console. An indicator appears for the selected setting.

Once: HI setting (three indicators)

Twice: MID setting (two indicators)

Three times: LO setting (one indicator)

Four times: OFF setting (no indicators)

Heat-induced burns are possible when using seat heaters.

Persons with a diminished ability to sense temperature (e.g., pe

Manualsnet FAQs

If you want to find out how the Climate Control Acura works, you can view and download the Acura RLX Sport Hybrid Climate Control 2017 Sedan Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Acura Climate Control as well as other Acura manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Acura Climate Control. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Acura RLX Sport Hybrid Climate Control 2017 Sedan Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Acura RLX Sport Hybrid Climate Control 2017 Sedan Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Acura RLX Sport Hybrid Climate Control 2017 Sedan Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Acura RLX Sport Hybrid Climate Control 2017 Sedan Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Acura RLX Sport Hybrid Climate Control 2017 Sedan Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.