Acer AcerSystem Aspire SA10 User's Guide PDF

AcerSystem User Guide

Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. Acer Incorporated makes no representations or warranties, either express or implied, with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose.

For your convenience, we suggest that you enter the model number, serial number, purchase date, and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your computer. All correspondence concerning your unit should include the serial number, model number, and purchase information.

This booklet has been reviewed for accuracy. Although Acer makes all reasonable attempts for this booklet to be printed in an accurate manner, Acer takes no responsibility for any inadvertent errors or misprints. Acers liability with respect to this booklet is subject to any limitation of liability set out in the applicable product warranty.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated.

Copyright 2009 Acer Incorporated All Rights Reserved

AcerSystem User Guide

Acer and the Acer logo are registered trademarks of Acer Inc. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.

iii

Information for your safety and comfort

Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.

Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

CAUTION for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the power supply unit:

Install the power supply unit before connecting the power cord to the AC power outlet.

Unplug the power cord before removing the power supply unit from the computer.

If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies.

CAUTION for accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.

Warnings Do not use this product near water.

Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged.

Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

To avoid damage of internal components and to prevent battery leakage,

iv

do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment

which will probably cause unexpected short current or damage rotor devices, HDD, Optical drive, and even exposure risk from lithium battery pack.

Safe listening Follow these instructions, suggested by hearing experts,to protect your hearing. Gradually increase the volume until you can hear it clearly and comfortably

and without distortion. After setting the volume level, do not increase it afteryour ears adjust.

Limit the amount of time listening to music at high volume.

Avoid turning up the volume to block out noisy surroundings.

Turn the volume down if you cant hear people speaking near you.

Using electrical power This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult your dealer or local power company.

Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.

If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

This product's power supply is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the power supply plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

v

Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, type SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.

Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service personnel when: the power cord or plug is damaged, cut or frayed

liquid was spilled into the product

the product was exposed to rain or water

the product has been dropped or the case has been damaged

the product exhibits a distinct change in performance, indicating a need for service

the product does not operate normally after following the operating instructions

Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instructions.

Telephone line safety Disconnect all telephone lines from the equipment when not in use and/or

before servicing. To avoid the remote risk of electric shock from lightning, do not connect

the telephone line to this equipment during lightning or thunderstorms.

Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options.

Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children.

vi

Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://global.acer.com/about/sustainability.htm.

Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org.

ENERGY STAR Acer's ENERGY STAR qualified products save your money by reducing energy cost and protecting the environment without sacrificing features or performance. Acer is proud to offer our customers products with the ENERGY STAR mark.

What is ENERGY STAR?

Products that are ENERGY STAR qualified use less energy and prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. Acer is committed to offer products and services worldwide that help customers save money, conserve energy and improve the quality of our environment. The more energy we can save through higher energy efficiency, the more we reduce greenhouse gases and the risks of

vii

climate change. More information refers to http://www.energystar.gov or http:/ /www.energystar.gov/powermangement.

Note: The statement above is applicable only to Acer system with an ENERGY STAR sticker.

Acer ENERGY STAR qualified products:

Produce less heat and reduce cooling loads, and warmer climates. Automatically go into "display sleep" and "computer sleep" mode

after 15 and 30 minute of inactivity respectively. Wake the computer from sleep mode by pushing keyboard or moving

mouse. Computers will save more than 80% energy at "sleep" mode.

ENERGY STAR and the ENERGY STAR mark are registered U.S. marks

Tips and information for comfortable use Computer users may complain of eyestrain and headaches after prolonged use. Users are also at risk of physical injury after long hours of working in front of a computer. Long work periods, bad posture, poor work habits, stress, inadequate working conditions, personal health and other factors greatly increase the risk of physical injury.

Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis or other musculoskeletal disorders. The following symptoms may appear in the hands, wrists, arms, shoulders, neck or back:

numbness, or a burning or tingling sensation

aching, soreness or tenderness

pain, swelling or throbbing

stiffness or tightness

coldness or weakness

If you have these symptoms, or any other recurring or persistent discomfort and/or pain related to computer use, consult a physician immediately and inform your company's health and safety department.

The following section provides tips for more comfortable computer use.

Finding your comfort zone Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or raising your sitting height to achieve maximum comfort. Observe the following tips:

refrain from staying too long in one fixed posture

avoid slouching forward and/or leaning backward

stand up and walk around regularly to remove the strain on your leg muscles

take short rests to relax your neck and shoulders

avoid tensing your muscles or shrugging your shoulders

viii

install the external display, keyboard and mouse properly and within comfortable reach

if you view your monitor more than your documents, place the display at the center of your desk to minimize neck strain

Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain.

Eyes Rest your eyes frequently.

Give your eyes regular breaks by looking away from the monitor and focusing on a distant point.

Blink frequently to keep your eyes from drying out.

Display Keep your display clean.

Keep your head at a higher level than the top edge of the display so your eyes point downward when looking at the middle of the display.

Adjust the display brightness and/or contrast to a comfortable level for enhanced text readability and graphics clarity.

Eliminate glare and reflections by:

placing your display in such a way that the side faces the window or any light source

minimizing room light by using drapes, shades or blinds

using a task light

changing the display's viewing angle

using a glare-reduction filter

using a display visor, such as a piece of cardboard extended from the display's top front edge

Avoid adjusting your display to an awkward viewing angle.

Avoid looking at bright light sources, such as open windows, for extended periods of time.

Developing good work habits Develop the following work habits to make your computer use more relaxing and productive: Take short breaks regularly and often.

Perform some stretching exercises.

Breathe fresh air as often as possible.

Exercise regularly and maintain a healthy body.

ix

Warning! We do not recommend using the computer on a couch or bed. If this is unavoidable, work for only short periods, take breaks regularly, and do some stretching exercises.

Note: For more information, please refer to "Regulations and safety notices" on page 9 in the AcerSystem User Guide.

x

C o

n te

n ts

Information for your safety and comfortiii

Safety instructions iii Additional safety information v Disposal instructions vi Tips and information for comfortable use vii

System tour 1 Setting up your computer 2

Necessary to know before setup 2 Selecting a location 2 Opening the package 2

Connecting peripherals 3 Starting your computer 3 Shutting down your computer 3 System upgrade 4

Opening the computer 4 Setting up new components 4

Frequently asked questions 5 Taking care of your computer 7

Important tips 7 Cleaning and servicing 7

To clean your computer and keyboard 7 To clean your pointing device 7 To clean your monitor 8 When to contact a service technician 8

Asking for technical assistance 8

Regulations and safety notices 9 FCC notice 9 Modem notices 10 Laser compliance statement 13 Digital audio output statement 13 Macrovision copyright protection notice 13 Radio device regulatory notice 13 General 14 European Union (EU) 14 The FCC RF safety requirement 15 Canada Low-power license-exempt radio communication devices (RSS-210) 15 Federal Communications Comission Declaration of Conformity 15

Remark: All images are for reference purposes only. Actual configuration may vary.

1

En g

lish

System tour Your computer consists of the following:

Icon Description Icon Description

Power button Floppy drive (selected models only)

Microphone jack Optical drive (selected models only)

Speaker or headphone jack

Media card reader (selected models only)

USB port IEEE 1394/FireWire jack (selected models only)

Copy button (selected models only)

Backup button (selected models only)

Media navigation interface (selected models only)

Removable hard drivecarriers (selected models only)

RCA jack (selected models only)

S/PDIF port (selected models only)

PS/2 keyboard connector PS/2 mouse connector

VGA port Serial port (selected models only)

Printer connector (selected models only)

USB port

Microphone-in jack RJ-45 Ethernet connector

Line-in jack Line-out / Speaker-out jack

HDMI port (selected models only)

ESATA port (selected models only)

Setting up your computer2

En g

lis h

Note: The specifications listed above are for reference only. The exact configuration of your PC depends on the model purchased.

Setting up your computer The AcerSystem is a versatile and powerful system, supporting a mainstream performance CPU. The computer uses a state-of-the-art bus architecture, which improves system efficiency and helps the system support varied multimedia and software applications.

Your AcerSystem has standard I/O (input/output) interfaces such as a parallel port, PS/2 keyboard and mouse ports, USB 2.0 ports, and stereo microphone, line-in and line-out jacks (configuration may vary by models). The system can accommodate extra peripheral equipment through these I/O ports.

Your system can also support an optional high-speed fax/data modem or an additional LAN (local area network) card.

Furthermore, the system is compatible with Microsoft Windows or Linux-based operating systems.

Necessary to know before setup

Selecting a location

Selecting the optimum location for your computer:

Do not place the system too close to other electrical equipment.

Do not place the system in high-traffic areas or where the power cord or other cords may be stepped on.

Avoid placing the system in any location that is excessively dusty or damp.

Opening the package

Open the package carefully and keep all packing materials for later use.

3

En g

lish

Ensure that all items are present and in good condition. If any of the following items are missing or appear damaged, contact your dealer immediately:

AcerSystem

Mouse (PS/2 or USB)

Keyboard (PS/2 or USB)

Wireless keyboard with pointing function

Remote control for Microsoft Windows Vista / Microsoft

Windows XP Media Center Edition

Note: Mouse, keyboard, wireless keyboard or remote control configuration may vary by selected models

User's Guide and Starter poster

Other user documentation and third-party software.

Connecting peripherals After everything is connected, plug the power cord into the system and insert the other end into a power outlet.

Note: Don't connect the system power cord before connecting all peripherals to the system.

Starting your computer After connecting all the peripheral equipment, start your computer according to the steps below:

1 Turn on all peripheral equipment, such as the monitor, printer, fax, speakers, etc.

2 Turn on the system. Once the start up process is complete, you can begin to use your computer.

Shutting down your computer From the "Start" menu, select "Shut Down" and click OK.

Setting up your computer4

En g

lis h

In the event of a system crash, press and hold the power button on the

front of the system for four seconds. After the system has shut down, turn off all peripheral devices.

System upgrade You can expand your AcerSystem system quickly and easily by adding components. You can also upgrade the components of your AcerSystem system.

Opening the computer

Before removing any panels or covers, please make sure to shut off the computer and unplug the power cord from the outlet.

Remove the screws on the chassis.

Slide the panel off.

Setting up new components

You can only use components compatible with AcerSystem computers. Before you choose new components, please ask your authorized Acer dealer whether the part will operate within your AcerSystem system.

In order to ensure proper setup and installation, please refer to the instructions provided with your new components.

Probable upgrades are:

Upgrade to high-capacity HDD

Expand high-level memory

Upgrade from a CD-ROM drive to CD-RW, DVD-ROM, DVD/CD- RW combo or DVD write (selected models only)r

Install additional interface cards in empty PCI slots, e.g., PCI fax/modem card (selected models only)

En g

lish

5

Frequently asked questions The following questions are possible situations that may arise during the use of your computer and each is followed by easy answers and solutions to the situation.

Q: I pressed the power switch but the system did not boot up.

A: Check the LED located above the power switch.

If the LED is not lit, no power is being applied to the system. Do any of the following:

Check if the voltage selector switch located on the rear panel of the computer is set to the correct voltage.

Check if you plugged the power cable properly into an electrical outlet.

If you are using a power strip or AVR, make sure that it is plugged in and turned on.

If the LED is lit, check the following:

Is a non-bootable (non-system) diskette in the floppy drive? If yes, remove or replace it with a system diskette and press Ctrl + Alt + Del to restart your computer.

The operating system files may be damaged or missing. Insert the start- up disk you created during Windows setup into the floppy drive and press Ctrl + Alt + Del to restart your computer. This will automatically diagnose your system and make necessary fixes. However, if the diagnostic utility still reports a problem, then you may have to perform the recovery process to restore your system to its original default factory settings.

Note: For more information about recovering your system, refers to the RCD instruction sheet.

Q: Nothing appears on the screen.

A: Your computer's power management function automatically blanks the screen to save power. Just press any key to turn the display back on.

If pressing a key does not work, you can restart your computer. If restarting your computer does not work, contact your dealer or the technical support center for assistance.

Q: The printer does not work.

E ng

lis hEnglish

En gl

is h

En gl

is h

En gl

is h

En gl

is h

En g

lis h

6

A: Do the following:

Make sure that the printer is connected to a power outlet and that it is turned on.

Make sure that the printer cable is connected securely to the system's parallel port and the corresponding port on the printer.

For additional information concerning the printer, refer to the printer's documentation.

Q: No sound comes out from the computer.

A: Check the following:

The volume may be muted. Look for the Volume icon on the taskbar. If it is crossed-out, click on the icon and deselect the Mute option. You can also press the volume control/mute knob on your USB keyboard to toggle from mute to sound on.

If headphones, earphones, or external speakers are connected to the line-out jack of your computer, the internal or built-in speakers are automatically turned off.

Q: System cannot read diskette, hard disk, CD or DVD information.

A: Check the following:

Make sure that you are using the correct type of disk.

Make sure the CD or DVD is inserted into the drive correctly.

Check if the CD or DVD is clean and not scratched.

Check your drive by using a good (i.e., undamaged) disk. If your drive cannot read the information on the good disc there may be a problem with the drive. Contact your dealer or technical support center for assistance.

Q: System cannot write data on the hard disk or writeable/re-writeable disk.

A: Check the following:

Make sure the diskette or hard disk is not write-protected.

Make sure that you are using the correct type of disk or diskette.

En g

lish

7

Taking care of your computer Please read the important instructions listed in this section. Following these instructions will help you maximize the durability of your computer.

Important tips Do not expose the computer to direct sunlight. Do not place it near

sources of heat, such as a radiator.

Do not expose the computer to temperatures below 0oC (32oF), or above

50oC (122oF). Do not subject the computer to magnetic fields. Do not expose the computer to rain or moisture. Do not spill liquid on the computer. Do not subject the computer to heavy shock or vibration. Do not expose the computer to dust and dirt. Never place the system on uneven surfaces. Do not step on the power cord or place heavy objects on top of it.

Carefully route the power cord and any cables away from personal traffic.

When unplugging the power cord, do not pull on the cord itself but pull on the plug.

The total ampere rating of the equipment plugged in should not exceed the ampere rating of the cord if you are using an extension cord. Also, the total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating.

Cleaning and servicing

To clean your computer and keyboard 1 Turn off the computer and unplug the power cord. 2 Use a soft cloth moistened with water and gently wipe the exterior of

the computer and the keyboard. Do not use liquid or aerosol cleaners.

To clean your pointing device

To clean a regular mouse (with rubber ball) 1 Open the circular cover at the base of the mouse. 2 Take out the rubber ball and wipe it with a soft, damp cloth.

E ng

lis hEnglish

En gl

is h

En gl

is h

En gl

is h

En gl

is h

En g

lis h

8

3 Put the ball back and replace the cover.

To clean an optical mouse For users of an optical mouse, refer to the documentation that came with your mouse for maintenance instructions.

To clean your monitor Make sure that you keep your screen clean. For cleaning instructions, refer to the documentation that came with your monitor.

When to contact a service technician If you dropped and damaged the computer If liquid has been spilled into the computer If the computer is not operating normally If a computer problem persists even after you have checked and applied

the troubleshooting tips discussed in the "Frequently asked questions" section on page 5

If your problem is not listed in the "Frequently asked questions" section on page 5

If you want to replace or upgrade any of your computer's internal components

Asking for technical assistance For technical assistance, contact your local dealer or distributor. You may also access the Web site (http://global.acer.com/support/index.htm) for information on how and where to contact the service centers available in your area.

9

En gl

is hEn

g lish

Regulations and safety notices

FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the device and receiver.

Connect the device into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. In compliance with FCC regulations, use shielded cables to connect to other computing devices. A dual- link cable is recommended for DVI output.

Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.

Caution Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this computer.

10

En g

lis h

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003.

Remarque l'intention des utilisateurs canadiens Cet appareil numrique de la classe B est conforme a la norme NMB-003 du Canada.

Declaration of Conformity for EU countries Hereby, Acer, declares that this PC series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. (Please visit http://global.acer.com/support/certificate.htm for complete documents.)

Compliant with Russian regulatory certification

Modem notices

Notice for USA This equipment complies with Part 68 of the FCC rules. Located on the modem is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. Upon request, you must provide this information to your telephone company.

If your telephone equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But, if advance notice is not practical, you will be notified as soon as possible. You will also be informed of your right to file a complaint with the FCC.

11

En gl

is hEn

g lish

Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service.

If this equipment should fail to operate properly, disconnect the equipment from the phone line to determine if it is causing the problem. If the problem is with the equipment, discontinue use and contact your dealer or vendor.

Caution: To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord.

TBR 21 This equipment has been approved [Council Decision 98/482/EC - "TBR 21"] for single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN termination point. In the event of problems, you should contact your equipment supplier in the first instance.

List of applicable countries EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece, Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal, Finland, Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary, Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in the countries of European Union, as well as Norway, Switzerland, Iceland and Liechtenstein. This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact local office in the country of use.

Notice for Australia For safety reasons, only connect headsets with a telecommunications compliance label. This includes customer equipment previously labelled permitted or certified.

12

En g

lis h

Notice for New Zealand

1 The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services.

2 This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances.

3 Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:

a There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and

b The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next call attempt.

4 Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. In order to operate within the limits for compliance with Telecom's specifications, the associated equipment shall be set to ensure that automatic calls to different numbers are spaced such that there is not less than 5 seconds between the end of one call attempt and the beginning of another.

5 This equipment shall not be set up to make automatic calls to Telecom's 111 Emergency Service.

6 This device is equipped with pulse dialing while the Telecom standard is DTMF tone dialing. There is no guarantee that Telecom lines will always continue to support pulse dialing.

7 Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should NOT contact the telecom Fault Service.

8 This equipment may not provide for the effective hand-over of a call to another device connected to the same line.

9 Under power failure conditions this appliance may not operate. Please ensure that a separate telephone, not dependent on local power, is available for emergency use.

13

En gl

is hEn

g lish

Laser compliance statement The CD or DVD drive used with this computer is a laser product. The CD or DVD drive's classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM.

APPAREIL A LASER DE CLASSE 1 PRODUIT LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS DOUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS.

LUOKAN 1 LASERLAITE LASER KLASSE 1 VORSICHT: UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEFFNET NICHT DEM STRAHLL AUSSETZEN

PRODUCTO LSER DE LA CLASE I ADVERTENCIA: RADIACIN LSER INVISIBLE AL SER ABIERTO. EVITE EXPONERSE A LOS RAYOS.

ADVARSEL: LASERSTRLING VEDBNING SE IKKE IND I STRLEN.

VARO! LAVATTAESSA OLET ALTTINA LASERSTEILYLLE. VARNING: LASERSTRLNING NR DENNA DEL R PPNAD L TUIJOTA STEESEENSTIRRA EJ IN I STRLEN

VARNING: LASERSTRLNING NAR DENNA DEL R PPNADSTIRRA EJ IN I STRLEN

ADVARSEL: LASERSTRLING NAR DEKSEL PNESSTIRR IKKE INN I STRLEN

Digital audio output statement The optical connector contains no laser or light emitting diode (LED) more than Class I.

Macrovision copyright protection notice "U.S Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132."

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Radio device regulatory notice

Note: Below regulatory information is for models with wireless LAN and/or Bluetooth only.

14

En g

lis h

General

This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Below information is for products with such devices.

European Union (EU) R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard:

Article 3.1(a) Health and Safety

EN60950-1:2001 + A11:2004

EN50371:2002 Article 3.1(b) EMC

EN301 489-1 V1.6.1

EN301 489-3 V1.4.1 (Applicable to non-bluetooth wireless keyboard mouse set)

EN301 489-17 V1.2.1 Article 3.2 Spectrum Usages

EN300 440-2 V1.1.2 (Applicable to non-bluetooth wireless keyboard mouse set).

EN300 328 V1.7.1

EN301 893 V1.4.1 (Applicable to 5GHz high performance RLAN)

List of applicable countries EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece, Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal, Finland, Sweden, United Kingdom, Estonia, Latvia, Lithuania, Poland, Hungary, Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in the countries of the European Union, as well as Norway, Switzerland, Iceland and Liechtenstein. This device must be used in strict accordance with the regulations and constraints of the country of use. For further information, please contact the local office in the country of use.

15

En gl

is hEn

g lish

The FCC RF safety requirement The radiated output power of the wireless LAN Card and Bluetooth card is far below the FCC radio frequency exposure limits. Nevertheless, the PC series shall be used in such a manner that the potential for human contact during normal operation is minimized as follows:

1 This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.

2 High power radar are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.

3 An improper installation or unauthorized use may cause harmful interference to radio communications. Also any tampering of the internal antenna will void the FCC certification and your warranty.

Canada Low-power license-exempt radio communication devices (RSS-210)

a Common information Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device.

b Operation in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing.

c Operation in 5 GHz band

Federal Communications Comission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following local Manufacturer /Importer is responsible for this declaration:

Product: Personal Computer

Model number: AcerSystem

Name of responsible party: Acer America Corporation

16

En g

lis h

Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan Contact Person: Mr. Easy Lai Tel: 886-2-8691-3089 Fax: 886-2-8691-3120 E-mail: easy_lai@acer.com.tw Hereby declare that: Product: Personal Computer Trade Name: Acer Model Number: AcerSystem Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all the necessary steps have been taken and are in force to assure that production units of the same product will continue comply with the requirements. EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards: EN55022: 2006, AS/NZS CISPR22: 2006, Class B EN55024: 1998 + A1: 2001 + A2:2003 EN55013:2001 + A1:2003 + A2:2006 (Applicable to product built with TV

tuner module) EN55020:2007 (Applicable to product built with TV tuner module) EN61000-3-2: 2006, Class D EN61000-3-3: 1995 + A1: 2001+A2: 2005 Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized standard: EN60950-1: 2001 + A11: 2004 EN60065: 2002 + A1: 2006 (Applicable to product built with TV tuner

module) Council Decision 98/482/EC (CTR21) for pan- European single terminal connection to the Public Switched Telephone Network (PSTN). RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment. The standards listed below are applied to the product if built with WLAN module or wireless keyboard and mouse.

Address of responsible party: 333 West San Carlos St. San Jose, CA 95110 U. S. A.

Contact person: Acer Representative

Tel: 254-298-4000

Fax: 254-298-4147

17

En gl

is hEn

g lish

R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard: Article 3.1(a) Health and Safety

EN60950-1:2001 + A11:2004 EN50371:2002

Article 3.1(b) EMC EN301 489-1 V1.6.1 EN301 489-3 V1.4.1 (Applicable to non-bluetooth wireless keyboard

mouse set). EN301 489-17 V1.2.1

Article 3.2 Spectrum Usages EN300 440-2 V1.1.2 (Applicable to non-bluetooth wireless keyboard

mouse set). EN300 328 V1.7.1 EN301 893 V1.4.1 (Applicable to 5GHz high performance RLAN).

Year to begin affixing CE marking 2009.

Easy Lai, Manager Date

Feb.9. 2009

Regulation Center, Acer Inc.

Remark: All images are for reference purposes only. Actual configuration may vary. V09A1

18

En g

lis h