3jTech wifiCAMit User Guide PDF

Download download
3jTech wifiCAMit User Guide PDF
3Jtech Manual 3Jtech Camera Manual 3Jtech wifiCAMit Manual 3Jtech Camera User Guide
Pages 15
Year 2008
Language(s)
English en
1 of 15
1 of 15

Summary of Content for 3jTech wifiCAMit User Guide PDF

Page 1

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)

wifiCAMit

Users Guide

Version: 1.0.0.2

Date: July 08, 2008

3JTech Co., Ltd. 2F, No. 342, Fu-Shing N. Rd.

Taipei, Taiwan Tel: +886-2-2500 6916

e-mail: info@3jtech.com.tw

Page 2

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 2

Revision History Version Date Changes 1.0.0.0 October 05, 2007 First Release of wifiCAMit Users Guide 1.0.0.1 December 21, 2007 Add the description of advanced network settings in Appendix B 1.0.0.2 July 08, 2008 Remove all of the description on Trigger In / Out connector

Page 3

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 3

Table of Contents Revision History ------------------------------------------------------- 2

TABLE OF CONTENTS-------------------------------------------------- 3

CHAPTER 1. PRODUCT OVERVIEW ---------------------------------------- 4

1.1 INTRODUCTION ----------------------------------------------------- 4

1.2 FEATURES -------------------------------------------------------- 4

1.3 PACKAGE CONTENTS ------------------------------------------------- 4

CHAPTER 2. PHYSICAL DESCRIPTION-------------------------------------- 5

2.1 PANELS ---------------------------------------------------------- 5

2.1.1 Front Panel --------------------------------------------------- 5

2.1.2 Rear Panel ---------------------------------------------------- 5

2.2 ILLUSTRATION ----------------------------------------------------- 6

2.2.1 Front Panel Information ------------------------------------------ 6

RJ45 Network Connector-------------------------------------------- 6

RJ22 Power Supply Connector---------------------------------------- 7

Lens ----------------------------------------------------------- 7

Antenna--------------------------------------------------------- 7

Wire/ Wireless Switch ---------------------------------------------- 7

RFIO Slot-------------------------------------------------------- 7

2.2.2 Rear Panel Information------------------------------------------- 7

Serial Number / Camera ID / Firmware version --------------------------- 7

2.2.3 LED Description on the Rear Panel --------------------------------- 8

CHAPTER 3. ASSEMBLING CAMERA --------------------------------------- 8

3.1 MOUNTING METHODS ------------------------------------------------ 9

CHAPTER 4. RESET TO DEFAULT-----------------------------------------11

APPENDIX A TECHNICAL SPECIFICATIONS --------------------------------12

APPENDIX B ADVANCED NETWORK SETTINGS -----------------------------14

Page 4

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 4

1. Product Overview 1.1 Introduction wifiCAMit is a Plug & Play wireless IP camera with a CMOS image sensor as well as built-in IP address, Ethernet Software Stacks and Protocols. Plug the wifiCAMit directly into an RJ45 Ethernet port of network devices with RJ45 cable or use wireless network 802.11b / 802.11g to watch the camera site from anywhere around the world. Connecting directly to Ethernet networks, wifiCAMit is a standalone digital network camera requiring no server at the camera site. wifiCAMit will provide a complete security solution for you with the easiest installation.

1.2 Features Low cost, DIY security camera Simple installation and multiple mounting methods No computer is needed at monitored site Up to 8 users concurrently browsing the same camera Standard JPEG image format Two-level password protection Optional security accessories package, including powerBox, RFIO, RF sensor and contact

sensor for the wired/wireless trigger-in

1.3 Package Contents 1 x wifiCAMit camera

1 x CD with setup software and users manual

1 x RJ45 Ethernet cable

1 x Desktop / Wall & Ceiling mount

Page 5

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 5

2. Physical Description The following information contains the physical description of wifiCAMit camera. This includes the functions and the locations of each connector and indicator. This information provides useful reference when installing the product. Please familiarize yourself with wifiCAMit cameras.

2.1 Panels 2.1.1 Front Panel For more related description, please refer to the Section 2.2 and Section 2.2.1.

2.1.2 Rear Panel For more detailed description, please refer to the Section 2.2 and Section 2.2.2.

5

2

1

10

7

4

3 6

8

9

Page 6

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 6

2.2 Illustration

No. in Figures

Name on wifiCAMit

Description Remark

1 RJ45 network connector

To connect to the camera and Ethernet port via RJ45 cable

Refer to section 2.2.1 for front panel information

2 RJ22 power supply connector

To connect to the camera and power adapter via RJ22 interface

Refer to section 2.2.1 for front panel information

3 Lens 300k pixels CMOS sensor Refer to section 2.2.1 for front panel information

4 Antenna For wireless access Refer to section 2.2.1 for front panel information

5 Wire/Wireless switch

To change the wired or wireless mode for wifiCAMit

Refer to section 2.2.1 for front panel information

6 RFIO slot To install the optional RFIO device

Refer to section 2.2.1 for front panel information

7 SW_1 Press SW_1 button, then wifiCAMit will perform the power reset

N/A

8 SW_2 Press and hold SW_2 button for 5~10 seconds to reset the camera to its factory defaults

The green indicator LED of RJ45 port will light when it is finished with the reset procedure

9 Camera information

Serial number, camera ID and firmware version

Refer to section 2.2.2 for real panel information

10 LED To display the status of the camera in wired or wireless mode

Refer to section 2.2.3 for LED description on the rear panel

2.2.1 Front Panel Information

RJ45 Network Connector

wifiCAMit is designed for 10/100Mbps Ethernet networks. wifiCAMit connects to the network via category 5 cable.

Page 7

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 7

RJ22 Power Supply Connector wifiCAMit adopts unique RJ22 cable for power supply. The specifications of wifiCAMits power adapter are as follows:

Input: 100 ~ 240V AC, 50/60Hz Output: 5V DC / 1A

Lens

wifiCAMit box includes a standard 75 wide angle lens fixed to the camera. Other types of lens are also available upon request. Please note that different price may apply to different lenses.

Antenna

Support WEP and WPA modes for wireless access.

Wire/ Wireless Switch

To switch the wifiCAMit camera into the wired or wireless mode, please push the switch up for wireless mode or down for wired mode.

RFIO Slot

Plug the optional RFIO device for the wireless trigger-in.

2.2.2 Rear Panel Information

Serial Number / Camera ID / Firmware version

The label sticker includes the serial number, camera ID and the firmware version of the camera.

NOTE: If you have updated the camera firmware version, the firmware version information may no longer be valid.

Page 8

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 8

2.2.3 LED Description on the Rear Panel Mode Color Status

Wired(LAN) Red Off when +5V DC power is turning on. Lit when the device works normally. Blinks when getting the SSID and password of the DHCP2WIFI router.

Wireless Red

Off when failing to connect with the Access Point / router. Lit when the connection with the Access Point / router is successful and the device works normally. Blinks when any traffic is present.

3. Assembling Camera wifiCAMit is designed for users to mount in three methods, including desktop, ceiling and wall (see the following figures). Please use the desktop strut or wall & ceiling strut separately to mount the camera based on your needs. The desktop strut is used for desktop mounting only, and the wall & ceiling strut is suitable for desktop, ceiling and wall mounting. The figures and description provided in the following section will assist you in assembling and installing the camera correctly. It is recommended to configure the camera before positioning the camera. The default method is the desktop mount with desktop strut.

Desktop Mount Wall Mount Ceiling Mount

Page 9

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 9

3.1 Mounting Methods wifiCAMit comes with a desktop mount as the default purchase. If users would like to adopt wall & ceiling mount, please follow the steps below. Procedures of ceiling mounting are the same as the ones of wall mounting. The difference between these two mounting methods lies in the position of screwing. Here we only take the wall mount of wifiCAMit for example to demonstrate the mounting method.

(1) First, please unscrew and remove the desktop strut in advance.

(2) Assemble the wall & ceiling strut coming with the package, and then fasten the camera with the screw on the BACK of the camera. (For the ceiling mount, you should fasten the camera with the screw on the TOP of the camera.

Page 10

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 10

(3) Link and lock the base coming with the package and strut together.

(4) Before positioning the camera, please drill the wall at the desired position and screw the fixed board. Then, hang the camera on the fixed board along the slot of the bottom.

Page 11

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 11

4. Reset to Default wifiCAMit provides Reset Power and Reset Default buttons that will be easy for users to reset the camera. The buttons are located on the back of the camera (See 1 and 2 of the figure below).

No. in

Figures Name on wifiCAMit

Description Remark

1 SW_1 Press SW_1 button then wifiCAMit will do the power reset.

N/A

2 SW_2

Press and hold SW_2 button for 5~10 seconds to reset the camera to its factory defaults.

The green indicator LED of RJ45 port will light when it is finished with the reset procedure.

Default Setting for wifiCAMit: 1) DHCP 2) If IP is not assigned within 30 seconds, the default IP then will become: 192.168.8.99:8299

for wired mode. 3) Public password: blank 4) Supervisor password: blank

2

1

Page 12

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 12

Appendix A Technical Specifications

Advanced 120 MIPS RISC processor( build in 64kB Flash program memory and 20kB SRAM data/program memory)

4M x 16bits SDRAM Lens:

Focal Length:3.6 mm Aperture: F 2.0 Angle of View (DIA): ~75 degrees

RJ22 for 5V DC /100~240V AC adapter Image Sensor Specification:

1/4 CMOS Sensor QCIF, QVGA and VGA 30 frames/sec Dynamic range: 60 dB Sensitivity:3.0 V/LUX-Sec

Trigger input: Normal Close to Open or Low to High TTL level Power consumption: 5V DC/ 750 mA International Image Standard

640x480, 320x240, 176x144 24bit Colored Motion JPEG images Frame/Sec. ( In wired mode):

640x480 @ 3+frames 320x240 @ 6+frames 176x144 @ 7+frames

Wireless Operation Mode: Ad Hoc / Infrastructure

Encryption Type: WEP (5 ASCII / WEP 13 ASCII), WEP (10 HES / 26 HEX) WPA / TKIP, WPA / AES

Operating Environment: Temperature 0~55oC Humidity 80% relative at 25oC

Network Protocol: UDP, TCP/IP, HTTP, NTP, DHCP, ARP, etc. Automatically switch between 10/100baseT/TX Fast Ethernet Customized Network communication protocol for avoiding hackers

Page 13

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 13

Weight: 150g (without the stand) Dimension of Main Body: 60 x 45 x 100 mm (without the stand)

Note: Any specification is subject to change without any notice.

Page 14

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 14

Appendix B Advanced Network Settings If you are not using a router, very likely you are using a DSL modem with PPPoE for single PC or multiple PCs. If your Internet allows only one IP or has no more spare IP from PPPoE, you would need to buy a new router. If your PPPoE still have a spare IP, you could setup PPPoE for the camera. Set up a new router

Find out the type of your WAN port of your Internet service: fixed IP, DHCP or PPPoE. (Please ask your Internet Service Provider for the connection details and information). Setup the new router according to the manual comes with the new router. After your PC connected to the new router is able to connect to the Internet, please follow the Quick Installation Guide for wifiCAMit to set up your camera. Set up PPPoE for the camera

Please follow the steps below to set up your PC: 1) Go to Start Settings Control Panel. 2) Click Network and Internet Connections.

3) Click Network Connections.

Page 15

http://www.3jtech.com.tw http://www.pnpipcameras.com wifiCAMit Users Guide

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 15

4) Highlight the icon Local Area Connection,

right click your mouse, and choose Properties function.

5) Highlight Internet Protocol (TCP/IP), and then press Properties button.

6) Choose Use the following IP address, and then follow the figure to input the IP address and Subnet mask. Finally, press OK button to exit the Internet Protocol (TCP/IP) Properties window.

7) Press Close

Manualsnet FAQs

If you want to find out how the wifiCAMit 3Jtech works, you can view and download the 3jTech wifiCAMit User Guide on the Manualsnet website.

Yes, we have the User Guide for 3Jtech wifiCAMit as well as other 3Jtech manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Guide should include all the details that are needed to use a 3Jtech wifiCAMit. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the 3jTech wifiCAMit User Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This 3jTech wifiCAMit User Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download 3jTech wifiCAMit User Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print 3jTech wifiCAMit User Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the 3jTech wifiCAMit User Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.