Contents

Epson PowerLite Home Cinema 8350 User's Guide PDF

1 of 80
1 of 80

Summary of Content for Epson PowerLite Home Cinema 8350 User's Guide PDF

PowerLite Home Cinema 8350/8700 UB

Home Theater Projector

Users Guide

2

Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporations operating and maintenance instructions.

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

Trademarks EPSON and C2Fine are registered trademarks, 1080Perfect is a trademark, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.

PowerLite and PrivateLine are registered trademarks, DigiScan and AccuCinema are trademarks, and Extra Care and Epson Connection are service marks of Epson America, Inc.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are registered trademarks of HDMI Licensing, LLC.

Pixelworks, DNX, and the DNX logo are trademarks of Pixelworks, Inc.

x.v.Color is a trademark of Sony Corporation.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

2013 Epson America, Inc. 5/13 CPD-28061R2

Contents

Introduction 6

Projector Parts 7

Remote Control 9

Optional Accessories 10

Registration and Warranty 10

Using This Manual 11

Setting Up the Projector 12

Choosing a Location 12

Installing the Projector 16

Connecting the Cables 18

Connecting Video and Computer Equipment 18

Making Other Connections 20

Installing Batteries in the Remote Control 21

Turning the Projector On and Off 21

Turning On the Projector 21

Turning Off the Projector 22

Selecting the Image Source 23

Positioning the Image 24

Making Basic Adjustments 26

Focusing and Zooming 26

Choosing the Aspect Ratio 27

Choosing the Color Mode 28

Advanced Color Adjustments 29

Adjusting the Gamma Setting 30

Adjusting RGBCMY 31

Locking the Projector 32

Contents 3

4 C

Making Detailed Adjustments 33

Using the Menu System 33

Changing How the Menus Display 35

Adjusting the Picture Quality 35

Input Brightness Settings 35

Sharpness and Picture Quality Settings 37

Color Settings 40

Adjustments for Computer Images 42

Selecting Memory Settings and Resetting the Projector 43

Selecting Memory Settings 43

Creating Memory Settings 44

Renaming Memory Settings 44

Deleting Saved Memory Settings 45

Resetting the Projector 45

Customizing Projector Features 46

Image Sizing 46

Screen Options 47

Other Setup Options 47

Maintenance 50

Cleaning the Lens 50

Cleaning the Projector Case 51

Cleaning and Replacing the Air Filter 51

Replacing the Lamp 53

Resetting the Lamp Usage Timer 56

Checking the Projector Status 56

Storing the Projector 57

Transporting the Projector 57

Problem Solving 58

What To Do When the Lights Come On or Flash 58

Solving Picture Problems 60

Solving Remote Control Problems 63

ontents

Where to Get Help 64

Specifications 65

General 65

Lamp 65

Remote Control 66

Dimensions 66

Electrical 66

Environmental 67

Safety 67

Compatible Video Formats 67

ESC/VP21 Command Codes 69

Notices 71

Important Safety Information 71

FCC Compliance Statement 73

Declaration of Conformity 74

Epson America, Inc. Limited Warranty 74

Index 76

Contents 5

6 In

Introduction

The PowerLite Home Cinema 8350/8700 UB projector lets you enjoy theater-quality images in the relaxing environment of your own home. Designed especially for home cinema use, it offers these outstanding features:

Native 1080p (1920 1080) resolution, dynamic contrast ratio up to 200000:1 (50000:1 for the Home Cinema 8350), and up to 1600 lumens (2000 lumens for the Home Cinema 8350) of brightness (white light output and color light output) for incredibly rich, sharp images in any room lighting

Auto Iris system that constantly controls the light output based on the gamma and black/white levels of your projected content, for perfectly adjusted images and deepest blacks

Epson C2Fine 3LCD technology for reliable picture quality, increased contrast ratio and uniform colors

1080Perfect video processing (using HQV Reon-VX technology for the Home Cinema 8700 UB) for more film-like images free of noise or artifacts

10-bit color quality (digital only for the Home Cinema 8350) for unmatched color accuracy, with over a billion colors available

Epson AccuCinema color management delivered by the built-in optical Cinema Filter blocks out excess light for an expanded, purer color range and sophisticated grayscale tracking

HDMI (High-Definition Multimedia Interface) port for superior, uncompressed digital video

True 16:9 wide-format projection

Flexible setup configurations, including front projection and ceiling mounted, with vertical and horizontal offset lens shift

Seven color modes, including x.v.Color, to quickly optimize viewing for different lighting environments, and a vast array of custom color adjustments

troduction

Projector Parts

Control panel (top)

Ventilation slots

Lens cover

Vertical lens shift dial

Adjustable foot

Video port

HDMI ports

Component video port

AC power inlet

Infrared receiver

Kensington lock port

Infrared receiver

Horizontal lens shift dial

S-Video port

Control (RS-232C) port

Trigger out port

PC port

Zoom ring

Focus ring

Main power switch

Front

Back

Lamp cover

Control panel (side)

Air intake (filter)

Lamp cover release

Cable holder

Introduction 7

8 In

Power button

Menu navigation button

Esc button Exits the current menu item

Menu button Displays the menus

Warning lights

Mounting bracket attachment points

Enter button Selects menu items or opens the line menu

Bottom

Projector Control Panel

Optional cable cover attachment points (brass colored)

Top control panel Side control panel

Source button Switches the video input source

troduction

Remote Control

Source buttons Switch between equipment connected to the projector

Color Mode button Optimizes viewing for different lighting environments

Power button Turns projector on or off

Memory button Recalls custom picture settings

Menu navigation buttons

Pattern button Displays test patterns to adjust the image

Menu button Displays the projectors menus

Aspect button Changes the pictures aspect ratio

Esc (escape) button Exits the current menu item

Blank button Temporarily stops projection or hides the menu screen

Enter/Line Menu button Selects menu items or opens the line menu

Gamma button Adjusts the gamma values of the screen display

Default button Restores default settings when menu is displayed

Sharpness button Adjusts image sharpness

Illumination button Lights the remote control buttons for easy viewing

RGBCMY button Adjusts the hue, saturation, and brightness for each color

Introduction 9

10 In

Optional Accessories

Epson provides the following optional accessories for the projector:

In addition to the accessories listed above, 1-year and 2-year extended service plans are available. You can purchase these plans and other accessories from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

Registration and Warranty

Your projector comes with a basic two-year carry-in warranty. For details, see page 74.

In addition, Epson offers free Extra CareSM Home Service. In the unlikely event of an equipment failure, you wont have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States or Canada. See your Extra Care Home Service brochure for details.

To register, simply follow the registration instructions on the CD, or register online at epson.com/webreg. Registering also lets you receive special updates on new accessories, products, and service.

Product Part number

Replacement lamp V13H010L49

Air filter replacement V13H134A21

Kensington security lock (anti-theft device) ELPSL01

Cable cover V12H003002

Projector mount ELPHB550

Anamorphic lens kit (Home Cinema 8700 UB only) ELPALK2

troduction

Using This Manual

This book contains all the information you need to use the projector, in addition to basic setup and maintenance instructions, troubleshooting tips, important safety instructions, specifications, and warranty information.

Please follow these guidelines as you read through the manual:

WARNING: Must be followed carefully to avoid bodily injury.

Caution: Must be observed to avoid damage to your equipment.

Note: Contains important information about your projector.

Tip: Contains helpful projection tips.

Need additional help? Take advantage of Epsons automated support services 24 hours a day at epson.com/support (U.S.) or epson.ca/support (Canada). Use this site to view FAQs (Frequently Asked Questions) or product information and e-mail your questions to Epson support.

If you need more help, you can use the Epson PrivateLine Support service by calling (800) 637-7661.

Introduction 11

12 S

Setting Up the Projector

Follow the instructions in this section to choose a location for the projector, connect the cables, and display an image.

Choosing a Location

You can install the projector for the viewing setups shown below, as well as rear projection.

Center

Ceiling

Side

etting Up the Projector

Ideally, keep the projector level and place it at a height so its lens is centered between the top and bottom of the screen, as shown below. If this is not possible, use the lens shift dials to reposition the image. As a rule of thumb, you can use lens shift to move the image up or down by nearly its full height, and left or right by about one-half its width (for details, see page 25).

If you place the projector off to the side, aim it straight ahead (rather than at the center of the screen), then use the horizontal lens shift dial to center the image on the screen.

Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the lens shift dials to change the lens position.

Projection distance

Offset A

Offset B

Offset refers to distance from bottom of image to center of lens using maximum lens shift.

Vertical lens shift dial

Horizontal lens shift dial

Setting Up the Projector 13

14 S

The size of the image is determined by the distance from the projectors lens to the screen. Depending on your display settings and how you use the Zoom ring, the actual size may differ. Use these tables as a guide for projector placement:

16:9 aspect ratio

Projection distance

Diagonal image size

(width height) Offset A Offset B

Horizontal

Offset

2.8 to 6.2 feet 0.87 to 1.88 m

30 in. (26 15 in.) 76.2 cm (66 37 cm)

6.8 in. 17 cm

21.5 in. 55 cm

11.5 to 11.5 in. 29 to 29 cm

3.8 to 8.3 feet 1.17 to 2.52 m

40 in. (35 20 in.) 101.6 cm (89 50 cm)

9.1 in. 23 cm

28.7 in. 73 cm

15.4 to 15.4 in. 39 to 39 cm

5.8 to 12.5 feet 1.77 to 3.80 m

60 in. (51 28 in.) 152.4 cm (130 75 cm)

13.6 in. 35 cm

43.0 in. 109 cm

23.1 to 23.1 in. 59 to 59 cm

7.8 to 16.7 feet 2.38 to 5.08 m

80 in. (71 39 in.) 203.2 cm (180 100 cm)

18.2 in. 46 cm

57.4 in. 146 cm

30.8 to 30.8 in. 78 to 78 cm

9.8 to 20.9 feet 2.98 to 6.36 m

100 in. (87 47 in.) 254 cm (220 120 cm)

22.7 in. 58 cm

71.7 in. 182 cm

38.5 to 38.5 in. 98 to 98 cm

11.8 to 25.1 feet 3.59 to 7.64 m

120 in. (106 59 in.) 305 cm (270 150 cm)

27.0 in. 69 cm

86.0 in. 219 cm

46.1 to 46.1 in. 117 to 117 cm

14.7 to 31.4 feet 4.50 to 9.56 m

150 in. (130 75 in.) 381 cm (330 190 cm)

34.0 in. 86 cm

107.6 in. 273 cm

57.7 to 57.7 in. 147 to 147 cm

19.7 to 41.8 feet 6.01 to 12.76 m

200 in. (173 98 in.) 508 cm (440 250 cm)

45.4 in. 115 cm

143.5 in. 364 cm

76.9 to 76.9 in. 195 to 195 cm

4:3 aspect ratio

Projection distance

Diagonal image size

(width height) Offset A Offset B

Horizontal

Offset

3.5 to 7.6 feet 1.07 to 2.31 m

30 in. (24 18 in.) 76.2 cm (61 46 cm)

8.3 in. 21 cm

26.3 in. 67 cm

14.1 to 14.1 in. 36 to 36 cm

4.7 to 10.1 feet 1.44 to 3.09 m

40 in. (32 24 in.) 101.6 cm (81 61 cm)

11.1 in. 28 cm

35.1 in. 89 cm

18.8 to 18.8 in. 48 to 48 cm

7.1 to 15.3 feet 2.18 to 4.66 m

60 in. (47 35 in.) 152.4 cm (120 90 cm)

16.7 in. 42 cm

52.7 in. 134 cm

28.2 to 28.2 in. 72 to 72 cm

9.6 to 20.4 feet 2.92 to 6.23 m

80 in. (63 47 in.) 203.2 cm (160 120 cm)

22.2 in. 56 cm

70.2 in. 178 cm

37.6 to 37.6 in. 96 to 96 cm

12 to 25.5 feet 3.66 to 7.79 m

100 in. (79 59 in.) 254 cm (200 150 cm)

27.8 in. 71 cm

87.8 in. 223 cm

47.1 to 47.1 in. 120 to 120 cm

etting Up the Projector

To determine the exact image size when you know the projection distance (or the exact projection distance when you know the desired image size), you can use the Image Size Calculator. This program is available on the Epson website at epson.com/support (U.S.) or epson.ca/support (Canada).

Also keep these considerations in mind:

Make sure there is plenty of space for ventilation around and under the projector. Do not set the projector on top of loose materials that could block the vents underneath.

Make sure the projector is within 9.8 feet (3 m) of a grounded electrical outlet or extension cord.

14.4 to 30.7 feet 4.40 to 9.36 m

120 in. (94 71 in.) 305 cm (240 180 cm)

33.0 in. 85 cm

105.0 in. 268 cm

56.5 to 56.5 in. 143 to 143 cm

18 to 38.4 feet 5.51 to 11.71 m

150 in. (118 91 in.) 381 cm (300 230 cm)

41.7 in. 106 cm

131.7 in. 334 cm

70.6 to 70.6 in. 179 to 179 cm

24.2 to 51.3 feet 7.36 to 15.62 m

200 in. (161 118 in.) 508 cm (410 300 cm)

55.6 in. 141 cm

175.6 in. 446 cm

94.1 to 94.1 in. 239 to 239 cm

4:3 aspect ratio (continued)

Projection distance

Diagonal image size

(width height) Offset A Offset B

Horizontal

Offset

Setting Up the Projector 15

16 S

Installing the Projector

To install the projector, you first need to determine the location, based on the size of your screen (maximum diagonal image size). Use the tables on page 14 as a guide to positioning the projector.

To suspend the projector from a ceiling, you will need the optional projector mount designed for the projector. See page 10 for ordering information. Follow the instructions included with the mount to install the projector.

WARNING: When installing or adjusting the ceiling mount, do not use adhesives to prevent the screws from loosening and do not use any type of oil or lubricant. These may cause the projector casing to crack and the projector may fall, causing serious injury and serious damage to the projector.

If you install the projector on the ceiling, you will need to invert the picture so that it appears right side up. Follow these steps:

1. Press the Menu button on the remote control.

2. Open the Settings menu, then select Projection.

3. Select Front/Ceiling.

4. Press the Menu button when done.

Note that you can rotate the Epson logo plate 180 degrees when suspending the projector from a ceiling.

If you are planning to use an AV controller with the projector, refer to the table of ESC/VP21 command codes on page 69. In addition, the projectors Trigger out port can be used to lower a projection screen or operate a motorized anamorphic lens (see page 48).

etting Up the Projector

The following illustrations show the dimensions of the projector:

5.4 in. 36 mm

Center of lens

2.8 in. 72 mm

5.8 in. 148.3 mm

0.5 in. 2.3 mm

5.2 in. 131 mm

17.7 in. 450 mm

0.2 in. 4.5 mm

11.8 in. 300 mm

5.9 in. 150 mm

3.0 in. 75 mm

2.2 in. 56 mm

1.8 in. 45 mm

5.3 in. 134.7 mm

6.3 in. 160 mm

15.3 in. 389.7 mm

M49mm

Setting Up the Projector 17

18 S

Connecting the Cables

Connecting Video and Computer Equipment

You can connect the projector to many types of video equipment, such as a Blu-ray Disc/DVD player, digital tuner, cable or satellite box, video game console, camcorder, or digital camera. You can also connect it to a desktop or laptop PC or Apple Macintosh system. For details on compatible video formats, see page 67.

You can connect up to six pieces of video equipment at the same time, using any of the commercially available cables shown below:

Port name Video equipment connection Computer connection

HDMI 1/ HDMI 2

Use an HDMI cable:

Component Use a component video cable (with RCA-style connectors):

Connect the cable to the three component video ports. Match corresponding colors between the cable and the ports.

PC Use a Mini D-sub, 15-pin monitor cable to connect to a computer RGB (monitor) port:

S-Video Use an S-video cable:

Video Use an RCA video cable:

etting Up the Projector

For best results, connect your video equipment to the HDMI port, if possible. If your equipment doesnt support HDMI, connect it to one of the following ports (highest quality listed first): Component (for component video), S-Video, or Video (for composite video).

When you connect a large or heavy cable to the projector, such as an HDMI cable, it is recommended that you fasten it to one of the two cable holders using a commercially available cable tie.

Connect video equipment to one of these ports

Connect a computer to one of these ports

Setting Up the Projector 19

20 S

Making Other Connections

Connect the power cable and other cables described below, depending on how you plan to use the projector.

Plug the power cable into the projector and a grounded electrical outlet.

The Trigger out port outputs a 12-volt DC signal when the projector is turned on. This lets a central control system monitor whether the projector is on or off, and can be used to raise or lower your projection screen automatically when the projector is in use. On the Home Cinema 8700 UB, it can also be used to operate a motorized anamorphic lens.

Connect a 3.5-mm mini jack to the port, as shown. Use the Trigger Out setting to enable the port (see page 48).

To use an AV controller with the projector, connect a 9-pin null modem serial cable to the RS-232C port. Refer to the table of ESC/VP21 command codes on page 69.

etting Up the Projector

Installing Batteries in the Remote Control

The remote control uses two AA batteries.

WARNING: Keep batteries away from children. If a battery is swallowed, contact your doctor immediately.

1. Release the tab and lift open the cover.

2. Insert two new AA batteries as shown.

3. Insert the tab on the cover and press it down until it clicks into place.

Aim the remote control at the screen, or at the front or back of the projector. Make sure you are within 30 feet of the projector.

If you suspect the batteries are weak, press the illumination button. If the buttons do not glow, replace the batteries.

Turning the Projector On and Off

Turning On the Projector

1. Remove the lens cap.

2. Turn on any connected equipment you plan to use.

3. Turn on the main power switch on the back of the projector.

ON

Setting Up the Projector 21

22 S

4. Press the Ppower button on the remote control or projector.

Note: To prevent children from turning on the projector, you can use the Child Lock feature. See page 32 for details.

If youll be using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can properly cool the projector at the high altitude air pressure. See page 49 for details.

The projector takes about 30 seconds to warm up and display an image. If you dont see a picture, you may need to change the image source as described on page 23.

Turning Off the Projector

1. Turn off any equipment connected to the projector.

2. Press the Ppower button on the remote control or projector. When you see a confirmation message, press the Ppower button again to turn the projector off.

Caution: Turn off this product when not in use to prolong the life of the projector. Continuous 24-hour-a-day use may reduce the overall life of the product.

3. If you need to move the projector, wait for the Ppower light to stop flashing, then turn off the projectors main power switch on the back. You can now unplug the projector.

Caution: Never turn off the main power switch without first turning off the projector and letting it cool as described above, or you could damage it and reduce lamp life.

Remote control Projector

etting Up the Projector

Selecting the Image Source

The source buttons on the projector and remote control let you switch between images from different pieces of equipment connected to the projector (such as a Blu-ray Disc/DVD player, cable or satellite box, or video game console).

Press the Source button on the remote control that corresponds to the port to which your video source is connected.

If you press the source button on the projector, you see a list of available sources. Press the source button to move through the list and select the desired source.

Note: If an image does not appear, see Problem Solving on page 58.

To temporarily turn off the image and darken the screen, press the Blank button on the remote control. Press the Blank button again to return to normal viewing.

Setting Up the Projector 23

24 S

Positioning the Image

If the image is not centered on the screen, use the horizontal and vertical lens shift dials to adjust its position.

Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the lens shift dials to change the lens position.

Note: You can display a test pattern to help adjust the image position by pressing the Pattern button on the remote control. Press the Esc button to turn off the test pattern.

When you hear a click, the lens position is almost centered. If the lens shift dial becomes difficult to turn, you cannot adjust the position any further.

If one side of the image is taller than the other, make sure the projector is parallel to the screen. If necessary, adjust the front feet so that the projector is horizontal.

Vertical lens shift dial

Horizontal lens shift dial

Adjustable feet

etting Up the Projector

The image cannot be moved to the maximum distance in both the vertical and horizontal directions. For example, the image cannot be shifted vertically when it has been shifted horizontally by the full amount. When the image has been shifted vertically by the full amount, it can be shifted up to 9 percent of the width of the image. The amount by which you can shift the image is expressed in terms of the image width (W) and height (H), as shown below:

H

H

H

Move upwards

Move to the left

Move to the right

Move downwards

1/2H

1/2W

Maximum lens shift boundary

Setting Up the Projector 25

26 M

Making Basic Adjustments

Follow the instructions in this chapter to make basic adjustments to the image shape, size, color, and quality. For further refinements, see Making Detailed Adjustments on page 33.

Focusing and Zooming

Use the focus ring to sharpen the image.

Use the zoom ring to reduce or enlarge the image.

Focus ring

Zoom ring

aking Basic Adjustments

Choosing the Aspect Ratio

In many cases, video signals are automatically resized to fit on your screen when Auto is selected as the Aspect setting. You may need to change the size of the image (or aspect ratio) for certain image types by pressing the Aspect button on the remote control.

Select one of these settings:

Normal for standard TV broadcasts, computer images, or images with a 4:3 aspect ratio.

Full for images recorded in squeeze mode.

Zoom for images recorded in 16:9 (wide-screen) format.

Wide for expanding a 4:3 image to 16:9 so it fills the whole screen. This stretches only the right and left sides of the image; the central part is unchanged.

Anamorphic Wide when using a commercially available anamorphic lens (Home Cinema 8700 UB only). This lets you display images recorded at a 2.35:1 aspect ratio using the projectors built-in scaler. If you use this setting without an anamorphic lens, the image fills the screen but not at the correct aspect ratio. If your anamorphic lens has a motorized transport, you may be able to operate it automatically with the Trigger out port (see page 48).

Note: When displaying 720p, 1080i, or 1080p signals through the HDMI or Component video port, the aspect ratio is automatically selected and you cannot change it.

If you display a 4:3 image using the Zoom setting, the top and bottom will be cut off. You can use the Zoom Caption Pos. option and other settings to resize and reposition the image. For details, see page 47.

For details on how the projector resizes the picture when you choose an Aspect setting, see page 67.

Aspect button

4:3 image using Normal setting 16:9 image using Zoom setting

Making Basic Adjustments 27

28 M

Choosing the Color Mode

You can change the Color Mode to automatically adjust brightness, contrast, and color, letting you quickly optimize the projected image for various lighting environments. You can also select a different color mode for each input sourcewhich is useful if you view different types of images from different sources. (For example, you might set the HDMI 1 source to Living Room if its usually used for watching movies in the daytime with the blinds closed, and the PC source to Dynamic for playing video games with the blinds open.)

Select the image source you want to adjust, then press the Color Mode button on the remote control. Choose from these settings:

Dynamic for projecting the brightest picture available.

Living Room for watching television programs during the day.

THX (Home Cinema 8700 UB) or Natural (Home Cinema 8350) for projecting natural, accurate colors in a dimly lit room.

Theatre (Home Cinema 8700 UB) or Cinema (Home Cinema 8350) for viewing movies in a dimly lit room.

Theatre Black 1 (Home Cinema 8700 UB) for images that are close to those in professional-use broadcast monitors. Use in a fully darkened room.

Theatre Black 2 (Home Cinema 8700 UB) to emphasize rich colors, like those seen in movies at the theater. Use in a fully darkened room.

x.v.Color for the most natural color reproduction when viewing movies through HDMI.

The built-in Epson Cinema Filter automatically improves color reproduction in a darkened room; it is not used when you select Dynamic or Living Room.

Color Mode button

aking Basic Adjustments

Advanced Color Adjustments

To further customize the color and image quality, you can adjust the gamma and individual RGBCMY color tones using the RGBCMY and Gamma buttons on the remote control. (Not available when x.v.Color is selected as the Color Mode.)

Note: You can fine-tune these and other color and image quality settings using the projectors menu system (see page 33). You can also save combinations of picture settings with the Memory feature for easy recall (see page 43). If you dont like the settings you have selected on a particular menu screen, you can press the Default button to restore the factory settings.

Gamma

RGBCMY

Making Basic Adjustments 29

30 M

Adjusting the Gamma Setting

You can select from five gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the light areas. Gamma presets make minor adjustments to mid-tone values. The larger the gamma preset, the lower the midtone values. Changing these settings affects contrast which can be seen as a blur in bright areas.

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).

1. Press the Gamma button. You see the following displayed on the screen:

2. Do one of the following:

Select one of the numeric correction values using the u or d button on the remote control and press the Enter button. You see the setting reflected in the graph on the right. The horizontal axis represents the input signal level, and the vertical axis represents the output signal level. Press the Gamma button to exit.

Select Customized. Then continue with the next step.

3. Do one of the following:

Select Adjust it from the image. You see a gamma icon on the projected image. Use the arrow buttons to move the icon to the area of brightness you want to adjust, then press Enter. The custom gamma graph appears with the channel selected for adjustment. Press the u or d button to adjust and then press Enter.

Select Adjust it from the graph. When the gamma graph appears, use the l or r

button to select the point on the graph that you want to adjust, and then use the u or d button to adjust the settings. Press Enter to save your setting and exit.

aking Basic Adjustments

Adjusting RGBCMY

Use this feature to adjust the hue, saturation, and brightness for each of the red (R), green (G), blue (B), cyan (C), magenta (M), and yellow (Y) color components.

1. Press the RBGCMY button. You see the following displayed on the screen:

2. Use the u or d button on the remote control to select the color you want to adjust, and press the Enter button.

3. Select the Hue, Saturation, or Brightness for that color, and use the l or r button to make the adjustment.

4. Press Esc to adjust another color, or press RGBCMY to exit.

Note: You can also adjust the offset and gain using the RGB setting in the projectors menu system (see page 41).

Making Basic Adjustments 31

32 M

Locking the Projector

The projector includes two lock settings to prevent the image from being accidentally changed once its adjusted, and to keep children from turning on the projector without adult supervision.

To access the lock settings, follow these steps:

1. Press the Menu button on the remote control.

2. Use the menu navigation buttons to open the Settings menu.

3. Choose from these options:

Child Lock to disable the Ppower button on the projectors control panel unless it is pressed for about 3 seconds. (You can use the Ppower button to turn it off, however.) Since you can still use the remote control to turn on the projector, you may want to keep it away from childrens reach.

Control Panel Lock to disable all the buttons on the projectors control panel. A lock icon appears on the screen whenever you press a button with Control Panel Lock turned on. To operate the projector, you must use the remote control. To cancel Control Panel Lock, press and hold the Enter button on the projectors control panel for at least 7 seconds.

4. Press Menu to exit the menu system.

If you turned on the Control Panel Lock, the projector buttons are now locked.

If you turned on the Child Lock, turn off the projector and let it cool down. The Child Lock takes effect after the cool-down period.

Caution: If the Direct Power On setting is turned on (see page 47), using the main power switch can cause the projector to start even though the Child Lock is in use.

Menu button

Menu navigation buttons

aking Basic Adjustments

Making Detailed Adjustments

You can use the projectors on-screen menus to make detailed adjustments to the image qualitysuch as the brightness, contrast, sharpness, and color. You can also change the menu display, sleep mode settings, and other projector features.

Using the Menu System

You can access the menu system either from the remote control or the buttons on the projectors control panel. You can access the full menu or a line menu that lets you change selected settings. You can also change the menu language and control how the menus display (see page 35).

Note: If you press Blank on the remote control while a menu is being displayed, the menu screen disappears. This is useful for checking the effects of your image adjustments. Press Blank again to make the menu reappear.

To display the full menu, press the Menu button on the projector or remote control. You see a display like this one:

Note: You may see different options, depending on your projector model and how your equipment is connected to it.

1. Press the u or d button to highlight a main menu option (Image, Signal, Settings, Memory, Info or Reset), then press the Enter button to select it.

2. Press the u or d button to highlight a setting, then press the Enter button.

Main menu options

Settings available for the highlighted menu

Making Detailed Adjustments 33

34 M

3. Press the u, d, l, or r button to change settings as necessary. You may have to press the Enter button to confirm your choice.

4. When youre finished, press the Esc button to return to the previous menu or press the Menu button to exit the menu system.

To display one of the line menus, press the Enter button. You see a display like this at the bottom of the image:

1. Press the u or d button to select the setting you want to adjust:

Brightness (see page 36)

Contrast (see page 36)

Sharpness (see page 37)

Color Saturation (see page 40)

Tint (see page 40)

Absolute Color Temperature (see page 40)

Skin Tone (see page 40)

2. Press the l or r button to adjust the setting.

3. Press the Menu or Esc button to close the line menu when youre done.

Note: When a line menu is displayed, you can press Default on the remote control to reset the menu to its factory setting.

aking Detailed Adjustments

Changing How the Menus Display

Use these options to control how the menus display.

Language

Select from 21 languages to use in the menu system.

Menu Position

Use the arrow buttons to choose a position on the screen for displaying the menu.

Menu Color

Select a color scheme for displaying the menus.

Adjusting the Picture Quality

Before fine-tuning the image using these adjustments, make sure you have already selected the best Color Mode for your picture and viewing environment, as described on page 28. Then use the settings in this section to finish adjusting the picture to your liking.

Most image quality settings are saved independently for each input source (Video, S-Video, HDMI, Component, PC) and color mode. After you finish adjusting the settings for one input source, switch to the other input sources youll be using and make any necessary adjustments.

Input Brightness Settings

If the signal from connected equipment is weak and images appear dark, you can adjust the Brightness and Contrast settings. You can adjust brightness and contrast for each image source and color mode.

The Brightness setting controls how much light is produced by the projector, and the Contrast setting adjusts the difference between the bright and dark areas of the projected image. The other settings in this section control how the projector interprets the light and dark areas of the picture.

Settings > Language

Settings > Display > Menu Position

Settings > Display > Menu Color

Making Detailed Adjustments 35

36 M

Brightness

Adjust the brightness so its suitable for your viewing conditions. For example, if youre projecting in a brightly lit room or onto an especially large screen, you may need to increase the brightness. Decrease the brightness for dark rooms or small screens; this also reduces power consumption and fan noise, and helps to prolong the life of the lamp.

Contrast

This setting adjusts the difference between bright and dark areas.

Auto Iris

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).

When this setting is on, the light output is automatically adjusted according to the brightness of the image. Select either Normal or High Speed to indicate how quickly you would like the projector to respond to changes in the brightness of the image. The setting is stored separately for each image source and color mode.

Setup Level

Note: This setting can be used only when an NTSC signal is being input through the Video or S-Video port, or when a video signal is being input through the Component video ports.

This setting adjusts the threshold at which dark areas of the image are rendered black (0 IRE). For compatibility with most DVD and video equipment sold in the United States, leave this setting at 0%. Check your video equipments specifications to be sure of the correct setting.

EPSON Super White

Note: On the Home Cinema 8700 UB, this setting can be used only when a composite video, S-Video, component video or HDMI signal is being input and the Color Mode is set to THX, Theatre, Theatre Black 1, or Theatre Black 2 (see page 28).

On the Home Cinema 8350, this setting can be used only when the signal is input through the HDMI 1 or HDMI 2 ports with the Color Mode set to Natural or Cinema (see page 28).

If bright parts of the image are washed out or overexposed (when the input signal contains values over 100 IRE), turn this setting on to compensate.

Image > Brightness

Image > Contrast

Image > Auto Iris

Signal > Advanced > Setup Level

Signal > Advanced > EPSON Super White

aking Detailed Adjustments

HDMI Video Range

Note: This setting can be used only when HDMI 1 or HDMI 2 is selected as the image source (see page 23). This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).

If your video equipment has an HDMI port and youve connected it to the projector using an HDMI cable, set the level of the projector to match that of the video equipment.

Power Consumption

This setting controls the light output from the projector. On Normal, the projector produces a brighter image and the lamp uses more power. To save power and extend the life of the lamp, select ECO.

Sharpness and Picture Quality Settings

If the image looks fuzzy, or if it contains noise or flickering, you can use these settings to correct it.

Sharpness

Use this function to make lines and edges appear more distinct in the image. This setting is stored separately for each image source and color mode setting. You can select Standard to adjust the sharpness of the entire image, or select Advanced to access the following submenu:

Note: The Advanced setting cannot be used with a signal input through the PC port.

Choose Thin-Line Enhancement to sharpen details such as hair and clothing. Choose Thick-Line Enhancement to sharpen large contours and backgrounds. Choose Vert. Line Enhancement to increase vertical image sharpness. Choose Horiz. Line Enhancement to increase horizontal image sharpness.

You can also access this setting by pressing the Sharpness button on the remote control.

Signal > Advanced > HDMI Video Range

Image > Power Consumption

Image > Sharpness

Making Detailed Adjustments 37

38 M

Progressive

Converts interlaced to progressive signals. The projector uses 3D DigiScan HD Circuitry Processing for video-sourced images. For film-sourced images, you can select from 2-2, 2-3, or 4-4 pulldown detection, depending on your model.

Leave the setting on Film/Auto for viewing movies on a player that produces interlaced output. Select Video for watching videos captured with a video camera. With the Home Cinema 8350, set to Off when viewing images with a large amount of movement. With the Home Cinema 8700 UB, set to Film if flickering appears with the Auto setting.

Note: This setting can be used only when viewing composite video or S-video signals, or 480i or 576i, or 1080i signals input through the Component, HDMI 1, or HDMI 2 ports (see page 67). For the Home Cinema 8700 UB, this setting cannot be changed while the 4-4 Pull-down setting is turned on (see page 39).

Motion Detection (Home Cinema 8350 only)

This setting specifies how signals are converted to progressive signals. Select a lower setting for slow-moving or still images (S) or select a higher number for video images (M).

Note: This setting can be used only when viewing composite video or S-Video signals, or 480i or 576i, or 1080i signals input through the Component, HDMI 1, or HDMI 2 ports (see page 67).

Noise Reduction

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port.

This setting reduces flickering of analog images. You can select from 3 levels of noise reduction.

Mosquito NR (Home Cinema 8700 UB only)

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port.

This setting reduces grainy noise that can appear around the edges of MPEG images. You can select from 3 levels.

Signal > Progressive

Signal > Motion Detection

Signal > Advanced > Noise Reduction

Signal > Advanced > Mosquito NR

aking Detailed Adjustments

Block NR (Home Cinema 8700 UB only)

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port.

This setting reduces block noise that can appear when projecting MPEG images that have been compressed at a low bit rate.

2-2 Pull-down (Home Cinema 8350 only)

Note: This setting can be used only when viewing a 1080p/24Hz signal input through the Component, HDMI 1, or HDMI 2 ports (see page 67). This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port.

This setting allows you to select whether images are projected with 2-2 pulldown detection or 2-3 pulldown detection. Select On for 2-2 pulldown detection.

4-4 Pull-down (Home Cinema 8700 UB only)

Note: This setting can be used only when viewing NTSC, M-PAL, or PAL60 signals input through the Video or S-Video ports, or 480i, 1080i/60Hz, or 1080p/24Hz signals input through the Component, HDMI 1, or HDMI 2 ports (see page 67). This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port.

This setting allows you to select whether images are projected with 4-4 pulldown detection or 2-3 pulldown detection. Select On for 4-4 pulldown detection.

Frame Interpolation (Home Cinema 8700 UB only)

This setting compares the current and previous frames, then creates a frame between them to reduce fuzziness and produce clearer moving images. You can select from 3 levels of frame interpolation.

Note: This setting cannot be changed while the 4-4 Pull-down setting is turned on.

Signal > Advanced > Block NR

Signal > 2-2 Pull-down

Signal > 4-4 Pull-down

Signal > Frame Interpolation

Making Detailed Adjustments 39

40 M

Color Settings

If the image colors dont look correct, you can adjust them using these settings. Use the first three settings described below to make the most visible changes. If you only need to make slight adjustments, you can fine-tune the picture with the remaining settings. Most color settings are stored separately for each image source and color mode.

Color Saturation

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port.

Adjusts the color intensity of the image.

Tint

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port.

Shifts the color balance between magenta and green.

Abs. Color Temp.

Note: This setting cannot be used when the Color Mode is set to THX or x.v.Color (see page 28).

Shifts the color balance between red and blue, making the image appear warmer or cooler.

Skin Tone

Note: This setting cannot be used when the Color Mode is set to THX or x.v.Color (see page 28).

Makes fine adjustments to the tint and controls the amount of magenta or green in the image. Also useful for correcting black-and-white images, if they look tinted.

Image > Color Saturation

Image > Tint

Image > Abs. Color Temp.

Image > Skin Tone

aking Detailed Adjustments

RGB

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).

Use the RGB settings to fine-tune the color of the image. You can adjust the offset and gain for each signal color (red, green, and blue). Use Offset to adjust darker shades and Gain for the lightest shades.

RGBCMY

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).

Use the RGBCMY settings to adjust the hue, saturation, and brightness of the six color components (red, green, blue, cyan, magenta, yellow). After adjusting each color, press Esc to move to another menu option. You can also access this setting by pressing the RGBCMY button on the remote control. See page 31 for more information.

Gamma

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).

You can select from five gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the light areas.

You can also access this setting by pressing the Gamma button on the remote control. See page 30 for more information.

Image > Advanced > RGB

Image > Advanced > RGBCMY

Image > Advanced > Gamma

Making Detailed Adjustments 41

42 M

Color Gamut (Home Cinema 8700 UB only)

Note: The Color Gamut setting can only be used when the Color Mode is set to THX (see page 28).

You can select from three different color gamut settings according to the source material and locale. Select SMPTE-C for standard definition (USA, Canada, and other regions using NTSC), EBU (PAL) for Europe, or HDTV (all regions).

Contrast Enhancement (Home Cinema 8700 UB only)

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).

This setting automatically enhances contrast by calculating based on the current contrast. You can select from 3 levels of contrast enhancement.

Super-resolution (Home Cinema 8700 UB only)

This setting sharpens blurred images, enhancing the apparent detail of the image. You can select from 3 levels of enhancement. Note that intentionally blurred parts of the image, such as out-of-focus backgrounds, may become sharper.

Adjustments for Computer Images

In addition to the settings described previously, you can adjust the Tracking and Sync settings for analog RGB computer images. Normally, these settings are adjusted automatically by the projector. If you notice that the image is blurry or contains dark vertical bands, you may need to adjust the settings yourself.

Auto Setup

Leave this setting on so that the projector automatically adjusts the tracking, sync, and position of the image.

Image > Advanced > Color Gamut

Image > Advanced > Contrast Enhancement

Image > Advanced > Super-resolution

Signal > Auto Setup

aking Detailed Adjustments

Tracking

Adjust the tracking to eliminate vertical bands. It is easiest to adjust the tracking when the image contains a lot of fine detail (such as black text on a white background).

Sync.

Adjust the synchronization to eliminate blurriness. For best results, make sure the tracking is properly adjusted first.

Selecting Memory Settings and Resetting the Projector

Your projector comes with 10 memory locations where you can save customized settings to obtain the best picture quality for each of your video inputs.

Selecting Memory Settings

You can easily recall the memory settings by using the memory button on the remote control.

1. Press the Memory button on the remote control.

2. Select Load Memory.

3. Use the arrow buttons to select the desired setting, then press the Enter button.

After a moment, the image appears on the screen using the retrieved settings. Certain settings may not be applied, depending on the input signal.

Signal > Tracking

Signal > Sync.

Memory button

Making Detailed Adjustments 43

44 M

Creating Memory Settings

Memory settings can be used to store most of the picture quality settings on page 37 and color settings on page 40. Before saving them to memory, adjust the settings to the desired levels.

1. Press the Memory button on the remote control.

2. Select Save Memory.

3. Select the memory name you want to use, then press the Enter button to save your settings.

Note: Saved settings are indicated by a green highlight next to the memory name. If you select a name that is already in use, the existing settings will be erased and new ones saved in their place.

Renaming Memory Settings

With the Home Cinema 8700 UB, you can rename memory settings so that they are easier for you to recognize.

1. Press the Memory button on the remote control.

2. Select Rename Memory.

3. Select the memory name you want to change, then press the Enter button. The name selection screen is displayed.

4. Do one of the following:

To select a name from the displayed preset names, select the desired name and press the Enter button.

To create your own name, select Customized and use the keyboard screen to enter the name. Use the arrow buttons to select a character, then press the Enter button. When you have selected all of the characters in your name, select Finish and press the Enter button.

aking Detailed Adjustments

Deleting Saved Memory Settings

You can clear all your memory settings at once.

1. Press the Menu button on the remote control.

2. Open the Reset menu, then select Reset Memory.

3. Select Yes, then press the Enter button to delete the memory settings.

Note: You can delete memory settings one at a time with the Erase Memory setting under the Memory menu.

Resetting the Projector

If the image quality isnt what you expect, one or more settings may be adjusted improperly. If necessary, you can restore the projector to its factory-default (original) settings.

To restore the settings in a specific menu (such as the Image or Settings menu), open that menu, select Reset, and confirm as needed. The example below shows how to reset the Image menu settings:

You can also reset the lamp usage timer or restore all the projector settings to their original values. Follow these steps:

1. Press the Menu button on the remote control.

2. Open the Reset menu.

Open the Image menu . . .

and select Reset

Making Detailed Adjustments 45

46 M

3. Do one of the following:

Select Reset Lamp Hours to clear the lamp usage timer and reset it to zero. You should reset the lamp timer only when you install a new projector lamp. See page 56 for more information.

Select Reset Memory to clear all memory settings.

Select Reset All to return all projector settings to their original defaults (except Component, Save Memory, Language, and Lamp Hours).

Customizing Projector Features

Use the settings in this section to adjust the image size and position, suppress on-screen text, and select basic setup options.

Image Sizing

Before adjusting any of these settings, make sure you have already selected an appropriate aspect ratio for the type of picture youre viewing (see page 27).

Overscan

For component video formats, this setting lets you see the edges of the image that are not normally visible in the picture (see page 67). If you see interference when you set Overscan to 100%, try adjusting the Position as described below.

Position

Note: This setting cannot be used with a signal input through the HDMI 1 or HMDI 2 port.

Use the arrow buttons to fine-tune the position of the image on the screen.

Aspect

This setting lets you change the aspect ratio of your image, and works the same as pressing the Aspect button on the remote control. See page 27 for more information.

Signal > Advanced > Overscan

Signal > Position

Signal > Aspect

aking Detailed Adjustments

Zoom Caption Pos.

Lets you adjust the shape and position of the image so that subtitles are visible (available only if the aspect ratio has been set to Zoom). Use Zoom Size to adjust the proportions of the image, and Zoom Caption Pos. to move the image up or down. Adjust overscan before changing the zoom position.

Screen Options

Messages

Turn this setting off if you want to prevent on-screen messages from appearing (such as the no-signal message, or the identifying text that appears when you switch between image sources or color modes).

Startup Screen

Turn this setting off if you want to prevent the startup screen from appearing while the projector is warming up.

Display Background

Changes the screen thats used when the projector is not receiving a signal or when you press the Blank button to temporarily stop projection.

Other Setup Options

Projection

You can select different options for projecting the image: Front, Front/Ceiling, Rear, Rear/Ceiling.

Direct Power On

Sets projection to start when the main power switch is turned on, without pressing the P power button on the remote control or the projector.

Note: When direct power on is enabled, power surges that occur after a power outage can cause the projector to turn on.

Signal > Zoom Caption Pos.

Settings > Display > Messages

Settings > Display > Startup Screen

Settings > Display > Display Background

Settings > Projection

Settings > Direct Power On

Making Detailed Adjustments 47

48 M

Video Signal

Leave this setting on Auto so the projector can automatically interpret the format, such as NTSC or PAL (for standard TV formats).

Component

Change this setting to match the type of equipment connected to the Component port. For component video, select Auto to let the projector automatically interpret the signal; or select YCbCr or YPbPr to manually select your video equipments signal.

Trigger Out

Turn on this setting to have the Trigger out port output a 12-volt signal to lower your projection screen when the projector is running. For the Home Cinema 8700 UB, select Power to signal when your projector is turned on, or Anamorphic Wide to engage a motorized anamorphic lens (commercially available) when that aspect ratio is selected.

Note: If you change this setting, the new setting will take effect the next time you turn the projector on.

Illumination

Turn off this setting to deactivate the lights on the projectors Ppower and source buttons. Use this setting if you find the lights distracting in a darkened room.

Sleep Mode

Turn off this setting if you dont want the projector to enter sleep mode. (Sleep mode shuts the projector off automatically when there is no video signal.)

Select 5min., 10min., or 30min. as the length of time before shutoff; decreasing the time conserves power and extends the life of the lamp.

To turn the projector back on, press the Ppower button on the remote control or the projector.

Child Lock

Lets you lock the Ppower button on the projectors control panel to make it more difficult for a child to turn on the projector. See page 32 for more information.

Settings > Input Signal > Video Signal

Settings > Input Signal > Component

Settings > Trigger Out

Settings > Illumination

Settings > Sleep Mode

Settings > Child Lock

aking Detailed Adjustments

Control Panel Lock

Lets you disable all the buttons on the projectors control panel to prevent the image from being accidentally changed once it is adjusted. See page 32 for more information.

High Altitude Mode

Adjusts the speed of the fan so it can properly cool the projector at higher altitudes. Turn this setting on if you are using the projector at an altitude of 4921 feet (1500 meters) or higher.

Settings > Control Panel Lock

Settings > High Altitude Mode

Making Detailed Adjustments 49

50 M

Maintenance

Your projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. You also may need to clean the air filter to prevent overheating.

WARNING: Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages in the projector can injure you severely. Do not try to service this product yourself, except as specifically explained in this Users Guide.

The only parts you should replace are the air filter and the lamp. If another part needs replacing, contact your dealer or a qualified servicer.

Cleaning the Lens

Clean the lens whenever you notice dirt or dust on the surface.

Use a blower brush that is designed for camera equipment to remove dust from the lens.

To remove dirt or smears, use a lens cloth or tissue. If necessary, moisten the cloth with lens cleaner and gently wipe the lens surface.

Caution: Never rub the lens with abrasive materials. Use only lens cleaning fluids that are designed for cleaning optics.

aintenance

Cleaning the Projector Case

Before you clean the case, turn off the projector and unplug the power cord.

To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.

To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Then wipe the case and dry it with a dry cloth.

Caution: Never use wax, alcohol, benzene, thinner, or other chemical detergents. These can damage the case.

Cleaning and Replacing the Air Filter

Your projector includes an air filter to ensure the best performance. If dust collects on the air filter, clean it as described below. Dust clogs prevent proper ventilation and cause overheating and damage to the projector.

1. Press the Ppower button and wait for the Ppower light to stop flashing. The projector cools down.

2. Turn off the projector using the power switch on the back.

3. Unplug the power cord and disconnect any cables.

4. Turn the projector over (unless its ceiling mounted).

5. Push down on the tabs on the filter cover to remove it.

6. Remove the air filter as shown.

Maintenance 51

52 M

7. Gently tap both sides of the air filter against a hard surface four or five times to remove loose dust from the air filter.

Note: Do not tap the filter too hard. This can cause it to bend or break.

8. Use a small vacuum cleaner that is designed for computers and other office equipment to remove any remaining dust from the surface of the filter. If you dont have one, gently clean the filter using a very soft brush (such as a clean artists paintbrush).

If the dirt is difficult to remove or the filter is broken, replace it. You can purchase air filter part number V13H134A21 from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

9. Insert the air filter as shown with the groove on the right.

10. Reattach the air filter cover by inserting the tabs as shown and pressing the cover against the projector until it clicks into place.

aintenance

Replacing the Lamp

The projection lamp lasts for up to 4000 hours. You can use the Info menu to check how long its been in use (see page 56). Its time to replace the lamp when:

The projected image gets darker or starts to deteriorate.

The projectors lamp light flashes red at half-second intervals.

The message Replace the lamp appears on the screen when you start projecting.

Note: Lamp life results will vary depending on mode selected, environmental conditions, and usage.

Turn off this product when not in use to prolong the life of the projector.

You can purchase lamp part number V13H010L49 from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

Be sure to read the Important Safety Information on page 71 before replacing the lamp.

WARNING: Let the lamp cool fully (about 1 hour) before replacing it. In the unlikely event that the lamp has broken, small glass fragments may be present and should be removed carefully to avoid injury.

Caution: Never touch the glass portion of the lamp with your bare hands; the invisible residue left by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new lamp.

Follow these steps to replace the lamp:

1. If the projector is on, press the P power button and wait for the light to stop flashing.

2. Turn off the power switch on the back of the projector.

3. Unplug the power cord and any cables.

4. Wait about an hour to make sure the lamp is no longer hot.

Lamp light

Maintenance 53

54 M

5. Insert the screwdriver that came with the lamp (or a similar tool) into the slot on the back of the projector to release the lamp cover. Then lift up the cover to remove it.

6. Loosen the two screws securing the lamp (they dont come all the way out).

7. Grasp the lamp as shown and pull it straight out.

WARNING: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.

aintenance

8. Gently insert the new lamp and tighten its screws.

Caution: Dont touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure.

9. Replace the lamp cover. (The projector wont work if the lamp cover is open or loose.)

10. Reset the lamp usage timer, as described on page 56.

Maintenance 55

56 M

Resetting the Lamp Usage Timer

After replacing the lamp, plug the projector back in, turn on the power switch on the back, and press the Ppower button. Then follow these steps to reset the lamp usage timer:

1. Press the Menu button on the projector or remote control.

2. Use the menu navigation buttons to open the Reset menu, then select Reset Lamp Hours.

3. When you see a confirmation prompt, highlight Yes and press the Enter button.

4. When youre finished, press the Menu button to exit.

The lamp usage timer shows 0H until youve used the lamp for at least 10 hours.

Checking the Projector Status

You can use the Info menu to view information about the current display settings and how long the projection lamp has been in use. To access the Info menu:

1. Press the Menu button on the projector or remote control.

2. Use the menu navigation buttons to open the Info menu. The following information appears:

Note: The information displayed depends on the currently selected image source. The Lamp Hours shows 0H until youve used the lamp for at least 10 hours.

The resolution indicates the total number of scan lines in the source signal. The number of visible scan lines depends on the signal format standard and selected display settings (see page 67).

Lamp Hours Refresh Rate

Source Sync Info

Input Signal Video Signal

Resolution Deep Color (color depth)

Scan Mode Status (error information)

aintenance

Storing the Projector

If you need to store the projector for an extended time, do the following:

Make sure the temperature of the storage area is within 14 to 140 F (10 to 60 C).

Attach the lens cover and retract the feet.

Remove the batteries from the remote control.

Pack the projector in its original packaging or equivalent.

Transporting the Projector

Note: Epson shall not be liable for any damages incurred during transportation.

The projector contains many glass and precision parts. When shipping the projector for repairs, use the original packaging material if possible. If you do not have the original packaging, use equivalent materials. Do not used materials that can become lodged in the projector vents. Be sure the carrier is capable of transporting fragile equipment and is aware that the projector is fragile.

Before transporting the projector, make sure you center the lens from left to right by turning the horizontal lens shift dial until it clicks. Then lower the lens all the way down by turning the vertical lens shift dial until it stops.

Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the lens shift dials to change the lens position. If the lens shift dial becomes hard to turn, you cannot adjust the position any further.

Maintenance 57

58 P

Problem Solving

This section explains how to interpret the projectors status lights, solve problems with the picture and remote control, and contact technical support.

What To Do When the Lights Come On or Flash

The lights on top of the projector indicate the projectors status and let you know when a problem occurs.

If the projector isnt working correctly, first press the P power button, let the projector cool down, turn off the power switch on the back, and unplug the power cord. Then plug the power cord back in and turn on the projector. If this doesnt solve the problem, check the status lights on top of the projector.

Lights indicating normal operation

Light state Cause and solution

All lights are off The projector is turned off. If necessary, connect the power cord and turn on the power switch on the back of the projector.

Power light is on The projector is in standby mode. Turn off the power switch in back to turn off the projector, or press the Ppower button to turn it on.

Power light flashes and

source light is on

The projector is warming up. Wait for the picture to appear.

Power light and source light are on

Projection is in progress.

Power light flashes; no other lights are on

The projector is cooling down. Wait until the light stops flashing and remains on. Then turn off the power switch in back to turn off the projector, or press the Ppower button to turn it back on.

Status lights

Warning lights

roblem Solving

Note: If the power and source lights dont come on, they may have been turned off using the Illumination setting (see page 48).

Lights indicating a problem

Light state Cause and solution

All lights are off The projector is not receiving power. Make sure the power switch on the back of the projector is turned on and the power cord is connected securely at both ends.

The temperature light flashes orange and the

power light is flashing

High-speed cooling is in progress. If the temperature rises further, projection will stop automatically. Make sure there is plenty of space around the projector for ventilation. Clean or replace the air filter if necessary (see page 51).

If you are using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can cool the projector properly (see page 49).

The temperature light is red

The projector is too hot, which turns off the lamp automatically. Let the projector cool for five minutes, then turn it back on. Make sure there is plenty of space around the projector for ventilation. Also, clean or replace the filter if necessary (see page 51).

If you are using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can cool the projector properly (see page 49).

The lamp light flashes orange and the power light is flashing

The lamp needs to be replaced soon (see page 53). Make sure you have a spare lamp handy. If you just replaced the lamp, you may need to reset the lamp usage timer (see page 56).

The lamp light flashes red

The lamp needs to be replaced. If you just replaced the lamp, make sure the lamp and its cover are securely installed (see page 53).

Both warning lights are flashing red

There is an internal problem. Turn off the power switch on the back of the projector, and unplug it from the electrical outlet. Then contact Epson for assistance (see page 64).

The temperature light flashes red

There is a fan or sensor problem. Turn off the power switch on the back of the projector, and unplug it from the electrical outlet. Then contact Epson for assistance (see page 64).

Both warning lights are red

There is an internal problem. Turn off the power switch on the back of the projector, and unplug it from the electrical outlet. Then contact Epson for assistance (see page 64).

Problem Solving 59

60 P

Solving Picture Problems

You cannot turn on the projector.

Make sure the power cord is connected and the power switch in back of the projector is turned on. Then wait a moment for the Ppower light to come on before pressing the Ppower button.

If youve set the Control Panel Lock, the control panel buttons are disabled; you must use the remote control to turn on the projector (see page 32).

If youve set the Child Lock, you have to press the Ppower button for 3 seconds to turn on the projector, or use the remote control (see page 32).

No picture appears on the screen or you see the No Signal message displayed.

Press one of the Source buttons on the remote control, or press the source button on the projector, to select the correct input source. Allow a few seconds for the projector to sync up after pressing the button.

Press the Blank button on the remote control to make sure the picture hasnt been turned off temporarily.

Check that the Ppower light is on, the Ppower light is not flashing, and the lens cover is off.

The projector may be in standby (or sleep) mode. If the Ppower light is on and the source light is off, press the Ppower button to turn the projector back on.

Make sure your video equipment is turned on.

Make sure your cable(s) are connected correctly (see page 18).

Only part of the picture is displayed, or the picture is distorted.

Press the Aspect button to select a different aspect ratio (see page 27).

If the Aspect is set to Zoom, you may need to use the Zoom Caption Pos. option to see the top or bottom section of the screen so that subtitles are visible (see page 47).

Check the Overscan to make sure its adjusted correctly (see page 46).

Use the Position setting to reposition the image on the screen (see page 46).

If youve connected a computer and you see only half the image, make sure the computers Dual Display setting is turned off. If part of the image is cut off, reset the projector settings (see page 45).

roblem Solving

Youre using a computer and no picture appears on the screen.

If youre using a Windows laptop:

Press the function key that lets you display on an external monitor. Its often labeled with an icon such as , but it may also be labeled CRT/LCD. You may have to hold down the Fn key while pressing it. Check your laptops manual or online help.

On most systems, the key lets you toggle between the LCD screen and the projector, or display on both at the same time. Allow a few seconds for the projector to sync up after pressing it.

If the function key doesnt let you display simultaneously on both screens, you might need to use the Display utility in the Windows Control Panel to make sure that both the LCD screen and external monitor port are enabled. From the Windows Control Panel, open the Display utility. In the Display Properties dialog box, click the Settings tab, then click Advanced. The method for adjusting the setting varies from computer to computer; you may need to click a Monitor tab, then make sure the external Monitor port is set as your primary display or enabled. See your computer manual or online help for details.

If youre using Mac OS X:

1. Open the System Preferences utility and select Displays.

2. Select Detect Displays.

3. On the Arrange or Arrangement screen, check the Mirror Displays checkbox. (See your computer manual for details.)

The picture is upside-down or reversed.

Change the Projection setting in the Settings menu (see page 47).

Click here

Problem Solving 61

62 P

The picture isnt rectangular.

If the image looks like or , the projector has been placed off to one side of the screen and angled toward it. Face the projector straight ahead (instead of at the center of the screen), then use the horizontal lens shift dial to center the image (see page 24).

If the image looks like or , make sure the projector is not tilted up or down.

The picture contains static or noise.

Make sure the Input Signal is set correctly for your connected video equipment (see page 48).

If youre viewing still images and you notice flickering or horizontal lines, turn on the Progressive setting (see page 38).

Make sure your cables are securely connected at both ends.

If youre using an extension cable, you may pick up interference if the cable is not adequately shielded. You may need to use a signal amplifier for longer cables.

If youre displaying the same image on your computer and projector screen, try turning off your laptops LCD display (see page 61).

The picture is blurry.

Make sure the Input Signal is set correctly for your video equipment (see page 48).

There may be dirt on the lens. Clean the lens as described on page 50.

Adjust the focus (see page 26).

Make sure the lens is not fogged by condensation. If youve just moved the projector from a cold environment, wait a couple of minutes before using it.

Adjust the Sharpness setting (see page 37).

If youre projecting from a computer, you may need to adjust the Tracking and Sync settings (see page 43).

The colors on the screen dont look right.

Make sure the Input Signal is set correctly for your connected video equipment (see page 48).

Press the Color Mode button on the remote control to select a different color mode (see page 28).

Check the brightness and contrast settings (see page 35).

roblem Solving

Fine-tune the colors with the settings listed on page 40.

If the picture looks dark, you may need to replace the lamp. Check the lamp usage timer to see how long the lamp has been in use (see page 56). Replace the lamp if its close to the end of its service life (see page 53).

Solving Remote Control Problems

The projector doesnt respond to remote control commands.

Make sure youre within about 30 feet of the projector, and the remote control is aimed at the projectors front or back sensor within the ranges shown below.

You may need to replace the remote control batteries (see page 21). Press the illumination button and check if the buttons glow. If they dont, replace the batteries.

Dim the room lights and turn off any fluorescent lights. Make sure the projector is not in direct sunlight.

Turn off nearby equipment that emits infrared energy, such as a radiant room heater.

Make sure there are no objects between the remote control and the IR receiver.

Approx.60

Approx.60

Approx.60

Approx.60

Problem Solving 63

64 P

Where to Get Help

Internet Support

Epson provides technical assistance 24 hours a day at epson.com/support (U.S.) or epson.ca/support (Canada). Here you can access troubleshooting information, download product documentation, and receive technical advice through e-mail.

Speak to a Support Representative

To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the duration of your warranty period.

You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or (905) 709-3839 (Canada). Support hours are 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM to 4 PM, Pacific Time, Saturday.

Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Before you call, please have the following information ready:

Product name (PowerLite Home Cinema 8350 or PowerLite Home Cinema 8700 UB)

Product serial number (located on the bottom of the projector)

Computer configuration, if youre connected to a computer

Description of the problem

Purchase Supplies and Accessories

You can purchase screens, carrying cases, or other accessories from an authorized Epson reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

roblem Solving

Specifications

General

Type of display Poly-silicon TFT active matrix

Size of LCD panels 0.74 inch (18 mm) wide

Lens F=2.0 to 3.17

Resolution (native format) 1920 1080 pixels, 1080p

Brightness Home Cinema 8350:

Normal mode: White light output 2000 lumens (ISO 21118 standard) Color light output 2000 lumens

Home Cinema 8700 UB:

Normal mode: White light output 1600 lumens (ISO 21118 standard) Color light output 1600 lumens

Dynamic contrast ratio 50000:1 (Home Cinema 8350) 200000:1 (Home Cinema 8700 UB)

Image size 30 to 300 inches

Projection distance 2.85 to 62.83 feet (0.87 to 19.15 m)

Zoom ratio 1 to 2.1

Aspect ratio 16:9

Fan noise level 22 dB

Lamp

Note: Lamp life will vary depending on mode selected, environmental conditions, and usage. Brightness decreases over time.

Turn off this product when not in use to prolong the life of the projector.

Type UHE (Ultra High Efficiency), E-TORL

Power consumption 200 W

Lamp life 4000 hours

Part number V13H010L49

Specifications 65

66 S

Remote Control

Range Approximately 30 feet (9 m)

Batteries AA 2

Dimensions

Height 5.4 inches (136 mm), not including adjustable feet

Width 17.7 inches (450 mm)

Depth 14.2 inches (360 mm); not including lens protrusion

Weight 16.1 lb (7.3 kg) (Home Cinema 8350) 16.5 lb (7.5 kg) (Home Cinema 8700 UB)

Electrical

Rated frequency 50/60 Hz AC

Power supply 100 to 120 VAC: 3.1 A (Home Cinema 8350) 3.3 A (Home Cinema 8700 UB)

200 to 240 VAC: 1.3 A (Home Cinema 8350) 1.5 A (Home Cinema 8700 UB)

Power consumption 100 to 120 VAC: Operating: 272 W (Home Cinema 8350) 297 W (Home Cinema 8700 UB) Standby: 0.2 W

220 to 240 VAC: Operating: 261 W (Home Cinema 8350) 284 W (Home Cinema 8700 UB) Standby: 0.3 W (Home Cinema 8350) 0.4 W (Home Cinema 8700 UB)

pecifications

Environmental

Temperature Operating: 41 to 95 F (5 to 35 C) Storage: 14 to 140 F (10 to 60 C)

Humidity Operating: 20 to 80% RH, non-condensing Storage: 10 to 90% RH, non-condensing

Operating altitude Up to 7500 feet (2286 meters); over 4921 feet (1500 meters), enable High Altitude mode in the Settings menu (see page 49)

Safety

United States FCC Part 15B Class B (DoC) UL60950-1

Canada ICES-003 Class B CSA C22.2 No. 60950-1

Pixelworks DNX ICs are used in this projector.

Compatible Video Formats

The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically adjusts to the incoming signal. It can receive these formats as composite video, S-video, or component video which it accepts through the Video, S-Video, and Component ports, respectively.

The projector also supports digital video (SDTV, HDTV) and various monitor display formats. Digital video is accepted by the HDMI and Component video ports. The PC port accepts analog RGB computer monitor signals.

If necessary, you can select a different Aspect setting to optimize the image. The resolution at which the image displays for a given setting depends on the currently active picture source, as listed in the following tables.

Composite video or S-Video

Format Refresh rate (Hz) Resolution

NTSC 60 720 480

PAL 50 720 576

SECAM 50/60 720 576

Specifications 67

68 S

Component video

Analog RGB (computer display)

HDMI

Format/

Signal Refresh rate (Hz) Resolution

SDTV

480i 576i 480p 576p

60 50 60 50

720 480 720 576 720 480 720 576

HDTV

720p 1080i 1080p

50/60 50/60 50/60

1280 720 1920 1080 1920 1080

Signal Refresh rate (Hz) Resolution

VGA 60/72/75/85 640 480

SVGA 56/60/72/ 75/85 800 600

XGA 60/70/75/85 1024 768

SXGA

70/75/85 60/75/85 60/75/85

1152 864 1280 960 1280 1024

WXGA

60 60 60/75/85

1280 768 1360 768 1280 800

MAC13 MAC16 MAC19 MAC21

67 75 59/75 75

640 480 832 624 1024 768 1152 870

Signal Refresh rate (Hz) Resolution

VGA 60 640 480

SDTV 480i 576i 480p 576p

60 50 60 50

720 480 720 576 720 480 720 576

HDTV 720p 1080i 1080p

50/60 50/60 24/30/50/60

1280 720 1920 1080 1920 1080

pecifications

ESC/VP21 Command Codes

You can use an AV controller with a 9-pin null modem serial cable to control the projector. You can download the complete ESC/VP 21 Communication Manual for home theater projectors from the Epson website at epson.com/support (U.S.) or epson.ca/support (Canada). Following are some of the available codes:

Item Command

Power ON/OFF ON PWR ON

OFF PWR OFF

A/V Mute ON/OFF ON MUTE ON

OFF MUTE OFF

A/V Mute selection Black MSEL 00

Blue MSEL 01

Source change

Terminal Signal name

Component Component video SOURCE 10

YCbCr SOURCE 14

YPbPr SOURCE 15

Auto SOURCE 1F

PC HDB15 SOURCE 20

RGB SOURCE 21

HDMI 1 HDMI 1 SOURCE 30

Video Video/S-Video SOURCE 40

Video (RCA) SOURCE 41

S-Video SOURCE 42

HDMI 2 HDMI 2 SOURCE A0

Color Mode Theatre CMODE 05

Dynamic CMODE 06

THX or Natural CMODE 07

Theatre Black 1 CMODE 09

Theatre Black 2 CMODE 0A

x.v.Color CMODE 0B

Living Room CMODE 0C

Specifications 69

70 S

Aspect ratio Normal ASPECT 00

Full ASPECT 40

Zoom ASPECT 50

Wide ASPECT 70

Anamorphic Wide (Home Cinema 8700 UB) ASPECT 80

Item Command

pecifications

76 In

Index

Numerics

2-2 Pull-down, 39 4-4 Pull-down, 39

A

Abs. Color Temp. setting, 40 Accessories, 10, 64 Air filter

cleaning and replacing, 51 to 52 ordering, 10

Anamorphic lens, 20, 27 Anamorphic Wide setting, 27 Anti-theft device, 7, 10 Aspect button, 9, 27, 60 Aspect ratio, selecting, 27, 46 Auto Iris setting, 36 Auto Setup, 42

B

Batteries, remote control, 21 Blank button, 23 Block NR, 39 Blurry picture, 62 Brightness

setting, 36 specification, 65

Buttons projector, 8 remote control, 9

C

Cables, connecting, 18 to 20 Child Lock, 32, 48

Cleaning air filter, 51 to 52 lens, 50 projector case, 51

Codes, AV controller, 69 Color

adjusting, 29 to 31, 40 to 41 problems, 62

Color Gamut setting, 42 Color Mode, 9, 28, 62 Color Saturation setting, 40 Color temperature setting, 40 Component setting, 48 Component video connection, 18 Computer

adjusting image, 42 displaying image, 61

Contrast button, 9 ratio, 65 setting, 36

Contrast Enhancement, 42 Control Panel Lock, 49 Control panel lock, 32 Control panel, projector, 8

D

Declaration of Conformity, 74 Direct Power On, 47 Display Background setting, 47 Documentation, 11

E

Electrical requirements, 66

dex

Epson accessories, 10, 64 Home Service, 10 PrivateLine Support, 11, 64 technical support, 11, 64 warranty, 10, 74 to 75

EPSON Super White setting, 36 ESC/VP21 command codes, 69

F

FCC Compliance Statement, 73 Filter, see Air filter Flickering, 38, 62 Focus ring, 26 Frame Interpolation, 39

G

Gain, color, 41 Gamma, 29 to 30, 41 Gamma button, 9

H

HDMI, 18, 19, 36 to 37 Help, 64 High Altitude Mode, 49 Home Service, 10

I

Illumination of buttons projector, 48, 58 to 59 remote control, 21

Illumination setting, 48, 59

Image adjusting, 29 to 31, 35 to 43 changing aspect ratio, 27 inverting, 16, 47 positioning, 24 to 25, 46 resizing, 27, 46 selecting source, 23 size, 14 to 15

Image menu, 45 Image problems, 60 to 63 Image Size Calculator, 15 Info menu, 56 Installing projector, 16 Interference, signal, 62

K

Kensington anti-theft device, 7, 10

L

Lamp checking usage timer, 56 life, 65 ordering, 10, 53 replacing, 53 to 55 resetting usage timer, 56 safety instructions, 71 to 72 specifications, 65

Language setting, 35 Lens shift dials, 13, 24 Lens, cleaning, 50 Lights, projector, 48, 58 to 59 Line menu, 9 Lock

Child Lock, 32, 48 control panel lock, 32 Kensington, 7, 10 projector buttons, 32

M

Memory button, 9, 43

Index 77

78 In

Memory settings creating, 44 renaming, 44 using, 43

Menu button, 9, 33 Menus

available settings, 35 to 49 customizing display, 35 line menu, 9 using, 33 to 35

Message setting, 47 Mosquito NR, 38 Motion Detection, 38 Mounting projector, 16 Moving projector, 57

N

No image, 60 to 61 Noise Reduction, 38

O

Offset, color, 41 Overscan, 46

P

Pattern button, 9, 24 Picture problems, 60 to 63 Pixelworks, 67 Positioning image, 24 to 25, 46 Positioning projector, 12 to 15 Power Consumption setting, 37 PrivateLine Support, 11, 64 Problems

indicator lights, 58 to 59 picture, 60 to 63 remote control, 63

Progressive mode setting, 38 Projection distance, 14 to 15, 65

Projector checking status, 56 cleaning, 51 control panel, 8 dimensions, 17, 66 installing, 16 lights, 48, 58 to 59 locking buttons, 32 menus, 35 to 49 parts, 7 to 8 positioning, 12 to 15 resetting menu options, 45 security lock, 7, 10 storing, 57 transporting, 57 turning on and off, 21 to 22, 60

R

Registration, 10 Remote control

batteries, 21 buttons, 9 lighting up buttons, 21 problems, 63

Replacing lamp, 53 to 55 Resetting

lamp usage timer, 46, 56 projector settings, 45

Resolution compatible formats, 67 to 68 projector, 56, 65

RGB settings, 41 RGBCMY setting, 29 to 31 RGBCMY settings, 41

S

Safety approvals, 67 Safety instructions, 71 to 72 Setup level, 36 Sharpness, 37 Signal menu, 36

dex

Skin Tone setting, 40

Sleep mode, 48 Source buttons, 8, 9 Source, selecting image, 23 Specifications

compatible video formats, 67 to 68 dimensions, 66 electrical, 66 environmental, 67 general, 65 lamp, 65 remote control, 66

Startup screen, selecting, 47 Static, 62 Storing projector, 57 Super-resolution, 42 Support, 11, 64 S-Video connection, 18 Sync (Synchronization) setting, 42

T

Technical support, 11, 64 Test pattern, 24 THX setting, 28 Tint, 40 Tracking, 42 Transporting projector, 57 Trigger out port, 20, 27 Trigger out setting, 48 Turning on and off projector, 21 to 22, 60

V

Video Signal setting, 48 Video, compatible formats, 67 to 68 VP21 codes, 69

W

Warranty, 10, 74 to 75 Where to Get Help, 64

Wide setting, 27

X

x.v.Color setting, 28

Z

Zoom Caption Pos. setting, 27, 47 Zoom ring, 26 Zoom setting, 27

Index 79

Notices

Important Safety Information

Follow these safety instructions when setting up and using the projector:

Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on.

Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you.

Except as specifically explained in this Users Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel.

The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small children to avoid any risk of suffocation.

Dont place the projector on an unstable cart, stand, or table. Also, dont use the projector near water or sources of heat.

Use the type of power source indicated on the projector. If youre not sure of the power available, consult your dealer or power company.

Place the projector near a wall outlet where the plug can be easily unplugged.

Dont insert the plug into an outlet with dust present, and insert the plug firmly into the outlet. Failure to do so could result in sparks or fire.

Dont overload wall outlets, extension cords, or integral convenience receptacles. This can cause fire or electric shock.

Dont block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Dont operate the projector on a sofa, rug, or other soft surface, or in a closed-in cabinet unless proper ventilation is provided.

Never push objects through the cabinet slots or spill liquid into the projector.

Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: when the power cord or plug is damaged or frayed; if liquid has been spilled into the projector, or if it has been exposed to rain or water; if it doesnt operate normally when you follow the operating instructions, or if it exhibits a distinct change in performance, indicating a need for service; if it has been dropped or the housing has been damaged.

Dont place the projector where the cord can be walked on. This may result in fraying or damage to the plug.

Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

Notices 71

72 N

The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.

Allow the lamp to cool for one hour before replacing it.

Unplug the projector during lightning storms or when not in use for extended periods.

Dont place the projector or remote control on top of heat-producing equipment.

If you use the projector in a country other than where you purchased it, use the correct power cord for that country.

Dont stand on the projector or place heavy objects on it.

Dont use the projector outside of the required temperature range of 41 to 95 F (5 to 35 C). Doing so may cause an unstable display and could lead to projector damage.

Dont store the projector outside of the required temperature range of 14 to 140 F (10 to 60 C) or in direct sunlight for long periods of time. Doing so may cause damage to the case.

WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. (This notice is provided in accordance with Proposition 65 in Cal. Health & Safety Code 25249.5 and following.)

otices

FCC Compliance Statement

For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment.

For Canadian Users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le materiel brouilleur du Canada.

Notices 73

74 N

Declaration of Conformity

According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers:

We: Epson America, Inc. Located at: 3840 Kilroy Airport Way

MS 3-13 Long Beach, CA 90806-2469 Telephone: (562) 981-3840

Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2.909. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Trade Name: Epson Type of Product: Projector Model: H373A/H419A Marketing Name: PowerLite Home Cinema 8350/PowerLite Home Cinema 8700 UB

Epson America, Inc. Limited Warranty

Two-Year Projector Limited Warranty and 90-Day Lamp Limited Warranty

What Is Covered: Epson America, Inc. (Epson) warrants to the original retail purchaser of the Epson projector product enclosed with this limited warranty statement that the product, if purchased new and operated in the United States, Canada, or Puerto Rico will be free from defects in workmanship and materials for a period of two (2) years from the date of original purchase. This limited warranty applies only to the projector and not to the projector lamp, which carries a limited warranty period of ninety (90) days from the date of original purchase. For warranty service, you must provide proof of the date of original purchase.

What Epson Will Do To Correct Problems: If your product requires service during the limited warranty period, please call Epson at the number on the bottom of this statement and be prepared to provide the model, serial number, and date of original purchase. Epson will, at its option, repair or replace the defective unit, without charge for parts or labor. When warranty service involves the exchange of the product or of a part, the item replaced becomes Epson property. The exchanged product or part may be new or refurbished to the Epson standard of quality, and at Epsons option, the replacement may be another model of like kind and quality. Epsons liability for replacement of the covered product will not exceed the original retail selling price of the covered product. Exchange or replacement products or

otices

parts assume the remaining warranty period of the product covered by this limited warranty. If Epson replaces the lamp as part of the warranty service, the replacement lamp carries the limited 90-day warranty stated above.

What This Warranty Does Not Cover: This warranty covers only normal use in the United States, Canada or Puerto Rico. Twenty-four hours per day or other excessive continual use is not considered normal use. This warranty does not cover consumables such as filters. This warranty is not transferable. Epson is not responsible for warranty service should the Epson label or logo or the rating label or serial number be removed. Epson is not responsible for warranty service should the product fail to be properly maintained or fail to function properly as a result of misuse, abuse, improper installation, neglect, improper shipping, damage caused by disasters such as fire, flood, and lightning, improper electrical current, software problems, interaction with non-Epson products, or service other than by Epson or an Epson Authorized Servicer. Postage, insurance, or shipping costs incurred in presenting your Epson product for carry-in warranty service are your responsibility. Epson will pay for all freight charges if you choose to send your unit to Epson for repair. If a claimed defect cannot be identified or reproduced in service, you will be held responsible for costs incurred.

THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE VOID. IN THE EVENT THE REMEDIES ABOVE FAIL, EPSON'S ENTIRE LIABILITY SHALL BE LIMITED TO A REFUND OF THE PRICE PAID FOR THE EPSON PRODUCT COVERED BY THIS LIMITED WARRANTY. EXCEPT AS PROVIDED IN THIS WRITTEN WARRANTY, NEITHER EPSON AMERICA, INC. NOR ITS AFFILIATES SHALL BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR INABILITY TO USE THE EPSON PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY.

In Canada, warranties include both warranties and conditions.

Some jurisdictions do not allow limitations on how long an implied warranty lasts and some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from jurisdiction to jurisdiction.

To find the Epson Authorized Reseller nearest you, please visit our website at: www.epson.com.

To find the Epson Customer Care

Manualsnet FAQs

If you want to find out how the PowerLite Home Cinema 8350 Epson works, you can view and download the Epson PowerLite Home Cinema 8350 User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Epson PowerLite Home Cinema 8350 as well as other Epson manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Epson PowerLite Home Cinema 8350. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Epson PowerLite Home Cinema 8350 User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Epson PowerLite Home Cinema 8350 User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Epson PowerLite Home Cinema 8350 User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Epson PowerLite Home Cinema 8350 User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Epson PowerLite Home Cinema 8350 User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.